Hi everybody,
i have a serious problem with an asus fonepad 7 me371mg model (k004) , basically after trying to flash a custom rom i bricked the phone and now i don't know how to take it back to life , as it is stuck un the usb logo.. no recovery , no droidboot.
i need your help
if someone have the same phone please help me to rebuild it from scratch:crying:
i think the internal partition table is damaged so it needs to be rebuilt.
i have a copy of the stock rom downloaded from the asus website but it's a zip file containing a .Raw file, i would like to extract the boot.img droidboot.img splash.bin system.bin and so on... unfortunately i don't know how to extract those files from the raw file.
Any information will be welcome cause i really don't know where to start from.
the device can only be detected as medfield devices bot i don't have the necessary files to flash the phone with xfstk or similar programs.
Thanks to everybody wanna help me
any budy help me
if your k004 stay at "no usb cable connected!" here is the solution
search and download this file "ME371MG_all_TW_user_V3.2.3-2.raw"
put it into sd card and insert it to k004
turn your k004 off
push "volume+" and "power" together > show "ASUS logo" STILL PUSH> show "no usb cable connected!" > release both button
push "volume+" and "volume-" together > show "DROIDBOOT" > select "SD DOWNLOAD"
choice the file "ME371MG_all_TW_user_V3.2.3-2.raw" > pray
wait till it done~
good luck
brainbooster said:
hi everybody,
i have a serious problem with an asus fonepad 7 me371mg model (k004) , basically after trying to flash a custom rom i bricked the phone and now i don't know how to take it back to life , as it is stuck un the usb logo.. No recovery , no droidboot.
I need your help
if someone have the same phone please help me to rebuild it from scratch:crying:
I think the internal partition table is damaged so it needs to be rebuilt.
I have a copy of the stock rom downloaded from the asus website but it's a zip file containing a .raw file, i would like to extract the boot.img droidboot.img splash.bin system.bin and so on... Unfortunately i don't know how to extract those files from the raw file.
Any information will be welcome cause i really don't know where to start from.
The device can only be detected as medfield devices bot i don't have the necessary files to flash the phone with xfstk or similar programs.
Thanks to everybody wanna help me
Click to expand...
Click to collapse
i have the same trouble.
Need fw dnx ifwi os dnx os image files for asus k004 me371mg
Hardware brick too!
need dnx ifwi os dnx os image files for asus k004 me371mg
Related
Hello Everyone.
My ASUS Fonepad 7 FE170CG is stuck on intel inside logo and i cant get into fastboot/droidboot menu also.
Any solution?
TIA
Did you try Volume up + Power buttons??? Try switching off the device by holding the power button... Charge your device atleast 50%... And try to flash the latest Kitkat >> here << Rename the zip file to k012_sdupdate.zip and put it on a formatted sd card... Now go to droid boot, choose recovery and your device will start to install the firmware....
irfanjunaid said:
Did you try Volume up + Power buttons??? Try switching off the device by holding the power button... Charge your device atleast 50%... And try to flash the latest Kitkat ><< Rename the zip file to k012_sdupdate.zip and put it on a formatted sd card... Now go to droid boot, choose recovery and your device will start to install the firmware....
Click to expand...
Click to collapse
yes i did, but it stays on intel inside logo and nothing else :/
thank you very much, changing the firmware name to k012_update.zip did the magic. first it was an error mesage flashing with the latest firmware. then it was a success flashing with the old version. thank you very much. you save my day.
asus k012
i try also ,but i got the error -----
p.s can you send me the old version ?
hello my asus zenfone 2 32gb ZE551ML wont boot... im stuck at the usb boot logo.... the problem is it doesnt response.
i have a tool called ( phone flash tool and intel phone flash tool )... but the problem is that i need these file for a complete succeed flash and bring my phone to life :
-OS DnX , OS Image , Modern...
they all bin files...
so if you can help me finding these files i will be greatfull...
many thx...
Hey !
Did you check if you have access to fastboot ?
BackDraft647 said:
Hey !
Did you check if you have access to fastboot ?
Click to expand...
Click to collapse
yes i have acces to it... but i have a tool that called intel phone flash tool lite.....so if i need these 3 files than i can reflash my zenfone 2 with new firmware
i need os image and os dnx for flashing my zenfone 2..its hard bricked and cant access to recovery mode..please help..please help someone..there is no asus service center in here please help
dnx
Download the stock rom for your model on the asus website.
Extract it using 7zip.
You will see a compressed folder named ifwi.
Extract it with 7zip
Your dnx files will be in there.
My k01n has soft bricked
but it can enter droidboot
It has these options in droidboot :
REBOOT DROIDBOOT
REBOOT
FACTORY RESET
SD DOWNLOAD
POWER OFF
I change the stock firmware name from UL-K01N-WW-5.4.0.0-user.zip to ASUS_BUNDLE.zip and push into extsd and select SD DOWNLOAD but its not work .
Now .I need the raw firmware to use in AFT . AFT supports FE171CG Model .
I need,need,need raw file . Plz plz develop ver 5.4.0.0 and upload plz plz:crying::crying::crying::cryinglz
Help me help :crying:
I believe if we fix the partition for k01n then we can flash the firmware normally.
There is an instruction given in a Japanese forum: http://onehallyu.com/topic/294288-a-fluke-that-save-my-phone-fonepad-7fe171cg-from-hard-brick/
It seems possible to unbricked the device and repair the partition. I have tried the solution but it doesn't work. There is the same error mentioned by other people in that forum.
Anyone know how to solve this ? I'm willing to pay using paypal. I found no solution over the internet on how to fix the corrupt partition.
Bought refurbished LG G4 ( Did nt knew earlier)
ROM - H81510C -
Unstable, Device got stuck with dual windows.
Freezes quite often.
Thought of flashing and used send command terminal.
It got bricked and went to Q9008 mode.
When I checked the board it says MODEL VS986
Tried SD card method---might be using wrong dump file
Tried QFIL.
Nothing working.
Help will be appreciated.
You're screwed. Hopefully you have insurance.
Spookymyo said:
You're screwed. Hopefully you have insurance.
Click to expand...
Click to collapse
No, I don`t have
Did you try LGUP software to reflash a VS986 KDZ?
Thanks
Can u send me the link for procedure
whats the current state of your device?
-> can you boot into Android?
-> can you boot into Download mode?
.
https://drive.google.com/file/d/0B41...ew?usp=sharing Extract folder / Move folder into QFIL folder as a folder not as individual files / load the firehoseprogrammer, patch, & raw / Flash / Remove battery / insert battery / hold volume up and plug in at same time until "download mode" appears on device / wait for drivers to install ? flash vs98627C.kdz with LGUP.
This will only work if the device bricked on 27C or earlier. If you know what FW version you bricked on the extract that FW and replace the appropriate files in the recovery image folder.
LINK not working
gratefuldeaddougie said:
https://drive.google.com/file/d/0B41...ew?usp=sharing Extract folder / Move folder into QFIL folder as a folder not as individual files / load the firehoseprogrammer, patch, & raw / Flash / Remove battery / insert battery / hold volume up and plug in at same time until "download mode" appears on device / wait for drivers to install ? flash vs98627C.kdz with LGUP.
This will only work if the device bricked on 27C or earlier. If you know what FW version you bricked on the extract that FW and replace the appropriate files in the recovery image folder.
Click to expand...
Click to collapse
Link not working !!!!!