Develop Bugs

[GUIDE] [Huawei Ascend G300] Unlock bootloader and gain root access.

Welcome all Huawei Acend G300 users, this is a full guide prepared by me which will help you unlock your bootloader and not only that but it will help you gain root access for system modifications and root required applications.
Click to expand...
Click to collapse
Keep in mind, this method is not confirmed working if you're running android 2.3.x [ Gingerbread ]. So do not use this if you're running it. Also dual sim ones aren't supported from what I see it tempers with the phone, I haven't tested it but many have reported it doesn't work on dual sims.
Lets get started shall we? Firstly I have gathered up some useful resources that will help you get started. Make sure you read this guide first, from top to bottom. Then continue. As you must have a clear understanding on what you are going to attempt. If you have any queries don't hesitate to ask on the thread itself.
Click to expand...
Click to collapse
I have performed these exact steps and have successfully unlocked my bootloader and rooted the phone. So if you're worried. Don't be. After attempting this I haven't noticed any issues either.
Okay, first of all you will need to download Unlockbootloader ---> View attachment unlockbootloader.zip
Once you have downloaded the said .zip extract the .exe file inside the .zip to your desktop.
Continue by turning on USB debugging on your G300. if its already switched on then skip the part below..
Go into Settings>Developer Options and tick the USB Debugging option.
Once its switched on, plug your phone to the computer using a USB cable.
So far you've downloaded Unlockbootloader, have switched USB debugging on, and your phone is connected to your PC.
Now run the .exe file you have just extracted. Click "Root" and let it do everything, it will prompt up with a few warnings saying don't use your keyboard because CMD is running.
Once the setup finishes, your phone should be rooted.
Head into the app drawer, and if you see "SuperUser" you're now officially rooted.
Reboot your phone to finalize the rooting and exploits.
Ok, now for the bootloader.
Once your phone is on, and connected again to the PC with debugging mode on, run the .exe file again and this time click "Unlock BootLoader".
Wait for it to do its job, once done reboot again and you now have a Stock Rooted and Bootloader unlocked ICS phone.
Click to expand...
Click to collapse
If this Guide helped, don't hesitate to hit the thanks button.

I am trying to root my Huawei g300, (from vodaom uk, unlocked) have followed your guide BUT I Have No usb debugging option anywhere under settings. Why? Still awaiting official ics update from vodaom / Huawei, impatiently.
Thanks jon

jon sawyer said:
I am trying to root my Huawei g300, (from vodaom uk, unlocked) have followed your guide BUT I Have No usb debugging option anywhere under settings. Why? Still awaiting official ics update from vodaom / Huawei, impatiently.
Thanks jon
Click to expand...
Click to collapse
Settings>applications>development>usb debug
Sent from my HUAWEI U8815 using Tapatalk 2

Can't Root
When I try and root my device is says "ROOT failure, please check the driver" what should I do?

EmmanuelA said:
When I try and root my device is says "ROOT failure, please check the driver" what should I do?
Click to expand...
Click to collapse
Hi, assuming you have installed the g300 adb drivers, once the device is hanging on the boot logo and you connect the usb cable. You need to wait for windows to fully the load the adb driver before you use the unlockbootloader.exe program.

EmmanuelA said:
When I try and root my device is says "ROOT failure, please check the driver" what should I do?
Click to expand...
Click to collapse
What you have to do is,turn on debug, then power off device fully by pulling off battery then putting it back in, now you must power on by golding the volume down button and power button at the same time, this should get it to be stuck on the huawei logo screen, now plug in your USB cable and wait for you PC to detect the phone and it should automatically install the devices driver's, one its done the now open the folder and run .BAT files, If you are experiencing problems here's a link for another guide : View

Hi,
After the "Unlock BootLoader", my phone doesn't boot. When the logo appears it stars to reboot again and never goes beyond that.
Any ideas ? Have I killed it ?

biscuitpt said:
Hi,
After the "Unlock BootLoader", my phone doesn't boot. When the logo appears it stars to reboot again and never goes beyond that.
Any ideas ? Have I killed it ?
Click to expand...
Click to collapse
Dou you have ics installed or gb. If gb look into my other post above urs.
Sent from my HUAWEI U8815 using Tapatalk 2

krishneelg3 said:
Dou you have ics installed or gb. If gb look into my other post above urs.
Sent from my HUAWEI U8815 using Tapatalk 2
Click to expand...
Click to collapse
I have gb, but the problem is when i re-insert the battery and power on the phone with vol down key pressed, it keeps rebooting, doesn't stay at the logo

biscuitpt said:
I have gb, but the problem is when i re-insert the battery and power on the phone with vol down key pressed, it keeps rebooting, doesn't stay at the logo
Click to expand...
Click to collapse
This is for ics mate.not gb.
Go to modaco
Ways to fix. Flash ota update b927 ...
Sent from my HUAWEI U8815 using Tapatalk 2

bootloop :/
Hi i tried this method and i dont know how it happened but now my phone is in a boot loop and i have no custom recovery, i cannot access anything just constant boot loop, big trouble,
does anyone have any idea?
thanks

evotaz said:
Hi i tried this method and i dont know how it happened but now my phone is in a boot loop and i have no custom recovery, i cannot access anything just constant boot loop, big trouble,
does anyone have any idea?
thanks
Click to expand...
Click to collapse
Turn ur phone completely off. By pulling out battery then apply the battery again.
Now hold volume down and power button and it should be in boot loader mode. If ur logo is stuck well this is in boot loader if not and it continues well.. idk
Sent from my Ascend G300 using Tapatalk 2

Hello krishneelg3,
I have tried a method on http://huaweig300.com but I'm stuck with the problem.
Installing USB drivers/Root/Backup IMEI went OK. Then by mistake I skipped the Step on page 5. Check Baseband and kept continued by Bootloader & ClockworkMod all went OK until the step 10. On page 6. After executing BootloaderG300.exe the phone rebooting cyclically, My operator screen appear for a approximately one second and the phone restarts again. How to resolve the problem and is there any hope to return to official ROM?
Thanks in advance, I really appreciate it.

petar17 said:
Hello krishneelg3,
I have tried a method on http://huaweig300.com but I'm stuck with the problem.
Installing USB drivers/Root/Backup IMEI went OK. Then by mistake I skipped the Step on page 5. Check Baseband and kept continued by Bootloader & ClockworkMod all went OK until the step 10. On page 6. After executing BootloaderG300.exe the phone rebooting cyclically, My operator screen appear for a approximately one second and the phone restarts again. How to resolve the problem and is there any hope to return to official ROM?
Thanks in advance, I really appreciate it.
Click to expand...
Click to collapse
What was ur baseband and were u running gingerbread?
If u r on official ics then this guide is for u, if not notify me.
PS : If you are running Gb I refer you to look into this guide, as long as your phone can boot into bootloader your fine, and I'm sure it will boot into Bloader mode : http://www.modaco.com/topic/353386-how-to-root-your-huawei-ascend-g300-for-windows-mac-and-linux/

Thanks krishneelg3,
my baseband is 109808, and I'm running GB.
The problem is that I don't know if I'm in a Bootloader mode when I see a pink screen?
When I press VOLUME DOWN + POWER it starts same as when I press POWER, first logoo (in my case picture of my operator) it lasts for about few seconds, then phone reboots and start doing it cyclically.
The other thing is that, when I press VOLUME DOWN + VOLUME UP + POWER, it then turns into a pink screen.
In that state (pink screen), when I plug in my phone to my PC, PC recognize my phone without reading sd card or internall memory.
So what should I do?
Thanks man, really appreciate it!

Guys,
I solved the problem.
I've just followed the instructions in step 5. on the site http://huaweig300.com and put a new update.app (1 KB) and copy it to the dload. After that I've used main dload (ICS folder, aprox abot 600 MB) and everything updated and installed successfully.
Thanks.
p.s. if anyone has or had the same problem, do not hesitate to ask.

hi all
sorry to hijack the thread
I have just got my son an ascend 300 which is locked to vodafone
its on android 2.3.6
the build number is
u881v100r001c02b892
i have a download of HDU88151079V100R001C00B934 which is the ICS but i dont think that will work for my build
ideally i want ICS but dont mind too much waiting.
but i do want to be able to get of all the bloatware.
I guess i need to root to do this.
the link to the modaco site is down and it seems this is for those lucky enough to be on ICS
would i be better off upgrading to ICS then following the method above or would i be better finding a method to root under gb (If so where)
many thanks

stringman said:
hi all
sorry to hijack the thread
I have just got my son an ascend 300 which is locked to vodafone
its on android 2.3.6
the build number is
u881v100r001c02b892
i have a download of HDU88151079V100R001C00B934 which is the ICS but i dont think that will work for my build
ideally i want ICS but dont mind too much waiting.
but i do want to be able to get of all the bloatware.
I guess i need to root to do this.
the link to the modaco site is down and it seems this is for those lucky enough to be on ICS
would i be better off upgrading to ICS then following the method above or would i be better finding a method to root under gb (If so where)
many thanks
Click to expand...
Click to collapse
OK get the official pics update b927* must be that build.
After its done downloading, extract its contents to your memorycard of the phone.
Make sure the update.app is in the root of SD card .
Then power off phone, remove battery re apply battery and hold the three buttons "volume up, volume down and the power button" until a screen pops up it will then install the stock ics once its done it'll reboot twice.
If only one it doesnt matter.
Setup the phone. Now to install b934 or newer versions use cwm for dazzozos repacks or the update force method. But I advice u to look for help on modaco. Thanks.
Modaco name : krishang3

krishneelg3
Thanks for that by b927* you are referring to a different version of HDU88151079V100R001C00B934 ?
where would i be able to get this from?
so this would give me the stock ics
what is the advantage of then installing HDU88151079V100R001C00B934 ?
Thanks

stringman said:
krishneelg3
Thanks for that by b927* you are referring to a different version of HDU88151079V100R001C00B934 ?
where would i be able to get this from?
so this would give me the stock ics
what is the advantage of then installing HDU88151079V100R001C00B934 ?
Thanks
Click to expand...
Click to collapse
Your on gingerbread so your baseband Is 109808 and if u flash any b934+ stock using the combinations say goodbye to your phone. I did that to my brothers and it bricked.
So to get to ice you must install b927 version of ics then your baseband will change to the new one *2030* now you can flash any b934+ stocks because you now have the new baseband.
Go to modaco and enter the G300 forums and look at the first dew pages all the info and guides you need. Procedure is simple.

Nexus X bootloop

Ok so here it is. I never post things on XDA because usually if you take the time to read and do some searching through google you can resolve your problems.
Anyways here's my problem. I traded my Blackberry Z10 (piece of sh**) for a Galaxy Nexus at a pawn shop. :highfive:
I was pretty happy to get my hands back to an android device and start flashing custom Roms and all that buzz.
It was instantly rooted when i got home, flashed a slimkat rom on there and had fun for a bit. :good:
Then my data connection was not working, so i flashed an AOKP Rom over top of the old rom without wiping anything previously. I did make a backup through TWRP but then i couldn't touch the screen in TWRP (power button still locked it though) so i gave up with that and tried CWM. NOTHING.
Now, 5 fuc***g days later, after searching, downloading, flashing stock images, following directions. I am still staring into this annoying as hell "X" boot loop.
I swear to you that i have tried absolutely everything I can possibly do to get it to stop.
-downloaded about 3 different google factory images
-tryed to un-root and re-root
-tryed to wipe the boot.img, system.img, userdata, bootloader, recovery, cache
-re-locked and un-locked bootloader (oem)
-I have tryed two different toolkits (Wugg's and Skipsoft) and i swear i have pushed every god damn button on both toolkits by now
-I even called google just to see what they would say, they just got me to go into the stock recovery and factory reset and clear the cache part.
-then google support told me to call samsung , just so they could tell me to do the exact same thing as google.
-the drivers are all installed correctly, but it will only recognize it in fastboot
-I cant even try an adb logcat command to see what is happening because USB Debugging is not on (not like i can turn it on)
Please if you think there is something that i have not tried go ahead and shoot at me with some kind of direction
***UPDATE**** to anyone who is reading this
I have fixed the bootloop. all thanks to legija (SEE- (http) forum.gsmhosting.com/vbb/f634/unbrick-dead-samsung-gt-i9250-galaxy-nexus-gt-i9100g-gt-i9300-1465412/)
it had somthing to do with Omap. - LINK for omapflash- (http) d-h.st/XNv
if you may have the same problem as me follow these steps
1. Download the zip file created by Legija
2. Extract zip to whatever location you're comfortable with (I used Android directory)
3. Open up Device Manager (Hold down Windows Key, press R, the type in devmgmt.msc and press OK)
4. Go to actions menu, select Add Legacy Hardware
5. Choose install manually, then have disk. Browse to where you extracted the zip, select the 'inf' file in usb_drv_windows
6. Choose OMAP, you'll get a popup if on Win 7, continue anyway (driver not signed)
7. Once completed with driver, pull battery out of phone, then plug it into USB
8. Double click omap4460_tuna_hs_pro.bat to start the process. Once you see "Press any key to continue..." close the CMD window and proceed to step 9
9. Unplug from USB, put battery back in, and power-up!
10. Extra step - depending on what's been done, it may 'brick' again - suggest to do a restore or a wipe reinstall afterwards to be certain (mine bricked again next reboot)

Hi,
I don't guaranteed if this works but maybe you could try Odin and reflash through your PC
Išsiųsta naudojantis Galaxy Nexus Tapatalk 4 Lt

xamxamas said:
Hi,
I don't guaranteed if this works but maybe you could try Odin and reflash through your PC
Išsiųsta naudojantis Galaxy Nexus Tapatalk 4 Lt
Click to expand...
Click to collapse
I can put into odin mode, but if i plug it into my computer the device inst recognized. It just stays at the "downloading... do not turn off target" screen. So im not to sure how i would go about re-flashing it.
But thank you for the reply. Sir:good:

Was your bootloader still unlocked when you tried to lock it?
Sent from my Galaxy Nexus using xda app-developers app

mrgnex said:
Was your bootloader still unlocked when you tried to lock it?
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
yes it was. would it make a difference?
Honestly i have even tried the ODIN program 2 different ways (just as xamxamas suggested) and now im thinking that the kernal has something to do with it.

Well I think you have a fried eEMMC (your internal storage is dead). When you reboot everything was as it was before no matter what you did?
Sent from my Galaxy Nexus using xda app-developers app

Flash, Recover and Restore Dead OPPO N1

Yesterday I tried to flash Color OS 2 Beta posted here. although the rom is not for the Oppo N1 W the XDA member cleonardo insure that it works very well. Then I flashed it in my OPPO N1, everything is ok during flashing, but then the phone freeze and the screen became black, I tried to go to recovery but nothing happened, I also connected the phone with my pc, flashed recovery, nothing happened and I thought my phone is dead. I could not find any solution for that, no one experienced the same situation. I post my problem in the same thread and he replayed (Dont worry , when you complete flash , at screen appear text chinese black colour , you wait some minutes), but i wait alot of time, restart my phone, i even put it for one hour to start and nothing happened. During my search, I came to this link: http://www.shuame.com/faq/restore-tutorial/547-oppo-n1-oppo-n1t.html in Chinese, using google translate I figured I can use their software to restore my recovery through RootGenius software, and then I can flash the stock or CM 10 or even CM 11 M8 again. After many hours, finally, I recover my phone again, flash the stock recovery and it came to life. Now everything working again. With this software, you can download roms, flash roms and recovery, use fastboot and even root your phone. You just need to connect your phone to it, ensuring that the USB debug is on, accept any notification and then you can browse your phone, flash roms and custom and stock recovery. It is the only way I found to recover my phone when fastboot not work, note that the ADB in the software is not working too but you can reboot in the fastboot with one click on the software itself.
Download from here: http://dl.shuame.com/files/RootGenius/1.8.7/RootGenius_en.exe

azharisadig said:
Yesterday I tried to flash Color OS 2 Beta posted here. although the rom is not for the Oppo N1 W the XDA member cleonardo insure that it works very well. Then I flashed it in my OPPO N1, everything is ok during flashing, but then the phone freeze and the screen became black, I tried to go to recovery but nothing happened, I also connected the phone with my pc, flashed recovery, nothing happened and I thought my phone is dead. I could not find any solution for that, no one experienced the same situation. I post my problem in the same thread and he replayed (Dont worry , when you complete flash , at screen appear text chinese black colour , you wait some minutes), but i wait alot of time, restart my phone, i even put it for one hour to start and nothing happened. During my search, I came to this link: http://www.shuame.com/faq/restore-tutorial/547-oppo-n1-oppo-n1t.html in Chinese, using google translate I figured I can use their software to restore my recovery through RootGenius software, and then I can flash the stock or CM 10 or even CM 11 M8 again. After many hours, finally, I recover my phone again, flash the stock recovery and it came to life. Now everything working again. With this software, you can download roms, flash roms and recovery, use fastboot and even root your phone. You just need to connect your phone to it, ensuring that the USB debug is on, accept any notification and then you can browse your phone, flash roms and custom and stock recovery. It is the only way I found to recover my phone when fastboot not work, note that the ADB in the software is not working too but you can reboot in the fastboot with one click on the software itself.
Download from here: http://dl.shuame.com/files/RootGenius/1.8.7/RootGenius_en.exe
Click to expand...
Click to collapse
hello
i need your help
i have the same problem
my phone is oppo n1w also
i try root genius but whane i open the program it ask to enable usb debugging mode
i cannot do anything with the phone and when i connect it to my pc and switch on nothing happened
whicj version did you use ?
thanks in advance for your help my phone is dead pls pls help

Hi, if your phone is totally black, when you connect it to the PC insure that you connect through the recovery (which will looks black too) then open the software in your PC, let it connect to your oppo, then open the tool area (an icon with 4 dots), select recovery ( the third one on the second row) open it, in the open window select the yellow folder and choose the stock recovery Oppo.N1.Recovery.1.0.0 ( search for it in the internet) then press the right Chinese icon. Now you can access the recovery again and flash the ROM back.
Sent from my N1 using XDA Free mobile app

If you fail in the first step, try connect again with the same steps, then use the fastboot icon to restart on fastboot, then use the recovery icon again.

i just complete video clip , its really easy my friend https://www.youtube.com/watch?v=v_NMsLLxUuw&feature=youtu.be

azharisadig said:
If you fail in the first step, try connect again with the same steps, then use the fastboot icon to restart on fastboot, then use the recovery icon again.
Click to expand...
Click to collapse
i made the process
everything is ok
i can flash recovery 1.0
BUT when i reboot look at the picture i attach and how the scrren appear and after turn black again
any idea ?
many thanks for your help

This is normal, just reboot into recovery through the software itself. When you select the recovery file there is an option to accept replacing the recovery, just tick yes... After flashing the recovery just boot through the software
Sent from my N1 using XDA Free mobile app

Everything is ok now
Many thanks for your help brother
Sent from my N1 using XDA Free mobile app

cleonardo said:
i just complete video clip , its really easy my friend https://www.youtube.com/watch?v=v_NMsLLxUuw&feature=youtu.be
Click to expand...
Click to collapse
Can you send us the link for the ROM you used.. Thanks
Sent from my N1 using XDA Free mobile app

link dowload rom 2.0 is new ,14/7th , its upgrade from rom coloros 2.0 , 9/5th . here. http://pan.baidu.com/s/1c08EuXE

my oppo n1 is dead
my oppo n1 is dead give me a link to repair my oppo n1

{How To}[Root][Recovery] Everything For Micromax Canvas Fire 2 (A104) KitKat Based

""As my Dev brothers said earlier, "BOND comes with bang". So giving respect to all of my dev brothers and starting this new thread.""
Lets first start with the very known thing of MTK devices. So these things are common in all MTK:-
1)
Code:
[URL="http://www.mediafire.com/download/kmt3bjcga3pyymf/SP_Flash_Tool_exe_v3.1344.0.212.rar"]SP Flash Tool (For flashing any MTK Device)[/URL]
2)
Code:
[URL="http://www.mediafire.com/download/3q679a2jelhcumc/UPDATE-SuperSU-v1.94.zip"]Super-User Update (Rooting zip, flashable in custom recovery)[/URL]
3)
Code:
MTK Preloader USB VCom Driver (Search on google, there are many)
Brothers,
1) is basically used by us for flashing custom recovery, boot, or factory firmware, if anything goes wrong.
2) is used for rooting a ROM, may its Kitkat or Jellybean.
3) is used for flashing through sp flash tool
PRE-Requisite:-
1) Normal Human Brain. [Must, Don't even try without it]
2) Patience [Again a must have thing.]
3) MTK Preloader USB VCom driver installed on your PC.:good:
4) Recovery Utility for Canvas Fire 2 A104 [Download this]:good:
5) Stock Firmware of Canvas Fire 2 A104 [Download this as a precaution]:good:
6) Heart & Money. {If everything goes wrong and nothing works, then heart to bear the blame and money to buy a new phone.
Now Procedure for rooting MT6582M based Micromax Canvas Fire 2 A104:-
a) Download SP Flash tool and also download the recovery utility.
b) Extract both somewhere on your pc but not out side "C/" drive.
c) Open Flash tool and click on scatter loading.
d) Select scatter loading "MT6582_Android_scatter" from recovery utility folder.
e) Now De-select everything other than recovery and boot in the flashtool.
f) Make sure only recovery & boot is selected in flashtool then click Download button.
g) Now connect your fire 2 (without battery) to your pc.
h) Let the process complete. After this disconnect your phone and press Volume up(+) and Power Button for
booting in to recovery.
i) In recovery choose zip "Update SuperUser zip" and flash it and voila.
You have got root and one of the best custom recovery "Phillz Touch based recovery" on your fire 2. Now start firing and enjoy.
Screenshot Given for reference of "Phillz Recovery".
Disclaimer:-
If anything goes wrong, and nothing is there left to make your phone come back, then neither me nor XDA nor my dev brothers are responsible for this. You are the person who have chosen to do this to your device and so you're the responsible person for this. So please do responsibly and enjoy boldly.

"First of all a big THANKS to all my dev brothers who ported 4.2 to MT6577. You guys genuinely has made a history in MediaTek Device forums."
A Big Thanks to Master @yuweng, for his awesome services and threads for mediatek. Its been a light of guidance for devs.
A Special Thanks to Master @phillz, for devoting time and creating recovery modules for Meditek Devices. The Phillz recovery has been the most famous and wonderful custom recovery.
Special Thanks to "Micromax" for making so many devices with same specs but different boots and all.
Special Thanks to XDA & Droid-Devz for giving me platforms for presenting my works and XDA been my school where I learned Android.
Special Thanks to my wife for bearing my non-sense jokes and being my partner in everything I do or will do.
Special Thanks to all those brothers who trusted me and still using my MODs and my ROMs.

Thanks For This Dude
Hope you all will see a rom For this device by me

ICS_XD said:
Thanks For This Dude
Hope you all will see a rom For this device by me
Click to expand...
Click to collapse
Sir,
I will wait for your ROM, Still using Neat ROM on my S2. Will wait even longer if its going to be a series of Neat ROM for Micromax A104.

Welcome back stranger ...
Regards

SuperDroid-BOND said:
Sir,
I will wait for your ROM, Still using Neat ROM on my S2. Will wait even longer if its going to be a series of Neat ROM for Micromax A104.
Click to expand...
Click to collapse
Mate No It wont be Neat Rom
It will have a New name
Just wait for it

ICS_XD said:
Mate No It wont be Neat Rom
It will have a New name
Just wait for it
Click to expand...
Click to collapse
Sir,
If its not a series of Neat Rom then also its fine because the Dev for both will be same...
Still I'll wait for getting this on my phone.
Sent from my LG-F240L using Tapatalk

reply fast sir
SuperDroid-BOND said:
""As my Dev brothers said earlier, "BOND comes with bang". So giving respect to all of my dev brothers and starting this new thread.""
Lets first start with the very known thing of MTK devices. So these things are common in all MTK:-
1)
Code:
[URL="http://www.mediafire.com/download/kmt3bjcga3pyymf/SP_Flash_Tool_exe_v3.1344.0.212.rar"]SP Flash Tool (For flashing any MTK Device)[/URL]
2)
Code:
[URL="http://www.mediafire.com/download/3q679a2jelhcumc/UPDATE-SuperSU-v1.94.zip"]Super-User Update (Rooting zip, flashable in custom recovery)[/URL]
3)
Code:
MTK Preloader USB VCom Driver (Search on google, there are many)
Brothers,
1) is basically used by us for flashing custom recovery, boot, or factory firmware, if anything goes wrong.
2) is used for rooting a ROM, may its Kitkat or Jellybean.
3) is used for flashing through sp flash tool
PRE-Requisite:-
1) Normal Human Brain. [Must, Don't even try without it]
2) Patience [Again a must have thing.]
3) MTK Preloader USB VCom driver installed on your PC.:good:
4) Recovery Utility for Canvas Fire 2 A104 [Download this]:good:
5) Stock Firmware of Canvas Fire 2 A104 [Download this as a precaution]:good:
6) Heart & Money. {If everything goes wrong and nothing works, then heart to bear the blame and money to buy a new phone.
Now Procedure for rooting MT6582M based Micromax Canvas Fire 2 A104:-
a) Download SP Flash tool and also download the recovery utility.
b) Extract both somewhere on your pc but not out side "C/" drive.
c) Open Flash tool and click on scatter loading.
d) Select scatter loading "MT6582_Android_scatter" from recovery utility folder.
e) Now De-select everything other than recovery and boot in the flashtool.
f) Make sure only recovery & boot is selected in flashtool then click Download button.
g) Now connect your fire 2 (without battery) to your pc.
h) Let the process complete. After this disconnect your phone and press Volume up(+) and Power Button for
booting in to recovery.
i) In recovery choose zip "Update SuperUser zip" and flash it and voila.
You have got root and one of the best custom recovery "Phillz Touch based recovery" on your fire 2. Now start firing and enjoy.
Screenshot Given for reference of "Phillz Recovery".
Disclaimer:-
If anything goes wrong, and nothing is there left to make your phone come back, then neither me nor XDA nor my dev brothers are responsible for this. You are the person who have chosen to do this to your device and so you're the responsible person for this. So please do responsibly and enjoy boldly.
Click to expand...
Click to collapse
sir is it work on Micromax fire a093 ?? its worked on fire a104..

FROM_HEAVEN said:
sir is it work on Micromax fire a093 ?? its worked on fire a104..
Click to expand...
Click to collapse
Brother,
First thing first that please don't quote the whole OP, its very long and consume much space. Now brother I don't know that its working for A093 or not as I don't have the device and now I have also sold the A104. Try it but before trying download the whole stock firmware of A093, so that if it fails you can get back to its original position.
Regards
BOND

bro i tried it but its failed on a093 but thanks for stock rom suggestion i manage to get back my devive now bro create a method for Micromax fire a093 i am waiting for this too long

Guys thanks for this awesome recovery and root method but one thing my titanium app not restoring apps and can't take up backup and it shows interrupted error....this happens after root with super su but works well on kinguser app....why it happens guys any solution? Thanks
Sent from my Micromax A104 using XDA Free mobile app

SuperDroid-BOND said:
Sir,
I will wait for your ROM, Still using Neat ROM on my S2. Will wait even longer if its going to be a series of Neat ROM for Micromax A104.
Click to expand...
Click to collapse
Hi man,
I did the whole procedure properly and the top half of my phone screen is inverted.. Not the display, but the touch only.. I must touch the center of the screen to pull down the status bar.. (Know what I mean?) I can't seem to fix the issue.. I tried flashing stock recovery.img, didn't work. Tried stock rom, didn't work. Did a full wipe too.. I'm not blaming you, I just need your help.. Any idea why that happened or how to fix it?

branndonn1 said:
Hi man,
I did the whole procedure properly and the top half of my phone screen is inverted.. Not the display, but the touch only.. I must touch the center of the screen to pull down the status bar.. (Know what I mean?) I can't seem to fix the issue.. I tried flashing stock recovery.img, didn't work. Tried stock rom, didn't work. Did a full wipe too.. I'm not blaming you, I just need your help.. Any idea why that happened or how to fix it?
Click to expand...
Click to collapse
I got the same issue. Looks like the provided boot.img wasnt meant for the device we have. I am also trying to fix this. Will update if it gets fixed.
---------- Post added at 08:51 PM ---------- Previous post was at 08:02 PM ----------
branndonn1 said:
Hi man,
I did the whole procedure properly and the top half of my phone screen is inverted.. Not the display, but the touch only.. I must touch the center of the screen to pull down the status bar.. (Know what I mean?) I can't seem to fix the issue.. I tried flashing stock recovery.img, didn't work. Tried stock rom, didn't work. Did a full wipe too.. I'm not blaming you, I just need your help.. Any idea why that happened or how to fix it?
Click to expand...
Click to collapse
Hey, Just in case you are still having that issue. I figured out the cause. Its because of the boot.img we flashed. The new hardware components used in our phones are not compatible with the old boot.img we flashed, which is supposed to be of earlier Firmware version. Please download the package below and flash it.
http://clicknupload.com/xdpt8n2w3oho
I assume that you must had already flashed the complete old firmware, you need to flash this new firmware. I havnt flashed old FW so just flashed the new boot.img of this package and the problem is solved.
This is a request to the thread owner to please mention this in OP that the users with V8.1 (can be checked in Settings >> About Phone >> Build Number) should uncheck boot while flashing, however it will cause same inverted touch issue in recovery but it can be managed with the volume buttons anyways.

branndonn1 said:
Hi man,
I did the whole procedure properly and the top half of my phone screen is inverted.. Not the display, but the touch only.. I must touch the center of the screen to pull down the status bar.. (Know what I mean?) I can't seem to fix the issue.. I tried flashing stock recovery.img, didn't work. Tried stock rom, didn't work. Did a full wipe too.. I'm not blaming you, I just need your help.. Any idea why that happened or how to fix it?
Click to expand...
Click to collapse
EnDLessssS said:
I got the same issue. Looks like the provided boot.img wasnt meant for the device we have. I am also trying to fix this. Will update if it gets fixed.
---------- Post added at 08:51 PM ---------- Previous post was at 08:02 PM ----------
Hey, Just in case you are still having that issue. I figured out the cause. Its because of the boot.img we flashed. The new hardware components used in our phones are not compatible with the old boot.img we flashed, which is supposed to be of earlier Firmware version. Please download the package below and flash it.
http://clicknupload.com/xdpt8n2w3oho
I assume that you must had already flashed the complete old firmware, you need to flash this new firmware. I havnt flashed old FW so just flashed the new boot.img of this package and the problem is solved.
This is a request to the thread owner to please mention this in OP that the users with V8.1 (can be checked in Settings >> About Phone >> Build Number) should uncheck boot while flashing, however it will cause same inverted touch issue in recovery but it can be managed with the volume buttons anyways.
Click to expand...
Click to collapse
Brothers,
When I bought this device then I downloaded it and made the rooting n recovery guide after testing it for three times on my device. If later the oem has changed anything in firmware then I'm sorry but I cannot update it as now I don't have this device anymore. If you want recovery for this device then please uploaded your boot.img from latest firmware and I'll make a recovery for you but after 7 days from now. currently busy in funeral of my Grandma.
Thanks & Regards
BOND
Sent From:-
""The Little Beast of XIAOMI""

SuperDroid-BOND said:
Brothers,
When I bought this device then I downloaded it and made the rooting n recovery guide after testing it for three times on my device. If later the oem has changed anything in firmware then I'm sorry but I cannot update it as now I don't have this device anymore. If you want recovery for this device then please uploaded your boot.img from latest firmware and I'll make a recovery for you but after 7 days from now. currently busy in funeral of my Grandma.
Thanks & Regards
BOND
Sent From:-
""The Little Beast of XIAOMI""
Click to expand...
Click to collapse
Hi Bond,
Never mind it. You can just put this info in your opening post for now. Also, here i am attaching the new boot.img. As per the release notes, this version is backward compatible.
Thanks

After flashing the boot.img inverted touch fixed.all goes right.but in charging animation(switch off) are still inverted

SuperDroid-BOND said:
""As my Dev brothers said earlier, "BOND comes with bang". So giving respect to all of my dev brothers and starting this new thread.""
Lets first start with the very known thing of MTK devices. So these things are common in all MTK:-
1)
Code:
[URL="http://www.mediafire.com/download/kmt3bjcga3pyymf/SP_Flash_Tool_exe_v3.1344.0.212.rar"]SP Flash Tool (For flashing any MTK Device)[/URL]
2)
Code:
[URL="http://www.mediafire.com/download/3q679a2jelhcumc/UPDATE-SuperSU-v1.94.zip"]Super-User Update (Rooting zip, flashable in custom recovery)[/URL]
3)
Code:
MTK Preloader USB VCom Driver (Search on google, there are many)
Brothers,
1) is basically used by us for flashing custom recovery, boot, or factory firmware, if anything goes wrong.
2) is used for rooting a ROM, may its Kitkat or Jellybean.
3) is used for flashing through sp flash tool
PRE-Requisite:-
1) Normal Human Brain. [Must, Don't even try without it]
2) Patience [Again a must have thing.]
3) MTK Preloader USB VCom driver installed on your PC.:good:
4) Recovery Utility for Canvas Fire 2 A104 [Download this]:good:
5) Stock Firmware of Canvas Fire 2 A104 [Download this as a precaution]:good:
6) Heart & Money. {If everything goes wrong and nothing works, then heart to bear the blame and money to buy a new phone.
Now Procedure for rooting MT6582M based Micromax Canvas Fire 2 A104:-
a) Download SP Flash tool and also download the recovery utility.
b) Extract both somewhere on your pc but not out side "C/" drive.
c) Open Flash tool and click on scatter loading.
d) Select scatter loading "MT6582_Android_scatter" from recovery utility folder.
e) Now De-select everything other than recovery and boot in the flashtool.
f) Make sure only recovery & boot is selected in flashtool then click Download button.
g) Now connect your fire 2 (without battery) to your pc.
h) Let the process complete. After this disconnect your phone and press Volume up(+) and Power Button for
booting in to recovery.
i) In recovery choose zip "Update SuperUser zip" and flash it and voila.
You have got root and one of the best custom recovery "Phillz Touch based recovery" on your fire 2. Now start firing and enjoy.
Screenshot Given for reference of "Phillz Recovery".
Disclaimer:-
If anything goes wrong, and nothing is there left to make your phone come back, then neither me nor XDA nor my dev brothers are responsible for this. You are the person who have chosen to do this to your device and so you're the responsible person for this. So please do responsibly and enjoy boldly.
Click to expand...
Click to collapse
hey buddy after rooting when I open superuser it says "The SU binary needs to be updated" and it doest work, I reflashed superuser with recovery but did't get root access..

branndonn1 said:
Hi man,
I did the whole procedure properly and the top half of my phone screen is inverted.. Not the display, but the touch only.. I must touch the center of the screen to pull down the status bar.. (Know what I mean?) I can't seem to fix the issue.. I tried flashing stock recovery.img, didn't work. Tried stock rom, didn't work. Did a full wipe too.. I'm not blaming you, I just need your help.. Any idea why that happened or how to fix it?
Click to expand...
Click to collapse
same problem...
---------- Post added at 12:23 PM ---------- Previous post was at 11:48 AM ----------
MayankGupta said:
hey buddy after rooting when I open superuser it says "The SU binary needs to be updated" and it doest work, I reflashed superuser with recovery but did't get root access..
Click to expand...
Click to collapse
not working.........plzz help after hitting download button nothing is happening

Driver not installing in Windows 8. Says driver signature is not present in INF.

Hello brother, something's wrong with my phone (mmx a104). After flashing custom recovery (twrp, philz) when I boot into recovery, touchscreen starts behaving abnormal. It got inverted horizontally and vertically. And it doesn't touch the place where I touch the screen.
Any solution dude.
Sent from my Micromax E352 using XDA-Developers mobile app

Nokia N1 porting from A5CNB19 to A5FMB19 with Google play services up and running

If you guys, like me , are stucked in an unrooted N1 without Google play services i'll post you this guide on How to port Nokia N1 from A5CNB19 to A5FMB19 without a rooted device.
First of all download the A5FMB19 recovery.img.zip
Then download the A5FMB19_Update.zip
Both Downloadable here ----> https://mega.nz/#F!HSg0FSgI!ZDx1THNk3RlijBTyw71OGg
Important! BOOTLOADER MUST BE UNLOCKED!
Unlock bootloader:
1) Go to your Developer Options and switch on OEM Unlock (4th in list)
2) Plug your N1 to your computer
3) Open your Minimal ADB and Fastboot as administrator and type
Code:
adb reboot fastboot
3a) Otherwise press and hold Power + Vol down
4) Once you're in fastboot mode type
Code:
fastboot oem unlock
on your device, press Vol Up and then accept with Power button
Now your bootloader is unlocked and you can flash the new recovery!
Flashing a new recovery:
1) While in Fastboot mode flash the recovery image with the following command :
Code:
fastboot flash boot recovery.img
WARNING! DO NOT LOCK YOUR BOOTLOADER AGAIN OR THE DEVICE WILL FACTORY RESET BY ITSELF!
2) Now you can Normal Boot your N1 .
3) A Black screen with 2 advice will appear .
-Start by pressing power button
-Factory reset by pressing Volume Buttons.
4)PRESS POWER BUTTON
5)The green droid will display and now you can enter in recovery pressing Power button + Vol Up (DO NOT HOLD THEM)
6)go to " Apply update from ADB" with Vol buttons then enter pressing Power button
7) Upload stock FMB19 update with the following command:
Code:
adb sideload A5FMB19_update.zip
Wait for it to install.
.
.
.
.
8) Lock your bootloader by
Code:
fastboot oem lock
when in fastboot mode
9) Enjoy your Google played Nokia N1
p.s. 1st boot up will take a while
I would like to express my most greetings to jemyzhang who made up the guide on "How to root A5CNB19 & A5FMB19"
If you have any kind of problem please contact me or write below this post so everyone can have a line-guide to follow in case of diseases
Edit : 09/09/2018 Download Links Updated

TheDuke94 said:
If you guys, like me , are stucked in an unrooted N1 without Google play services i'll post you this guide on How to port Nokia N1 from A5CNB19 to A5FMB19 without a rooted device.
First of all download the A5FMB19 recovery.img
Then download the A5FMB19_update.zip
Important! BOOTLOADER MUST BE UNLOCKED!
Unlock bootloader:
1) Go to your Developer Options and switch on OEM Unlock (4th in list)
2) Plug your N1 to your computer
3) Open your Minimal ADB and Fastboot as administrator and type
Code:
adb reboot fastboot
3a) Otherwise press and hold Power + Vol down
4) Once you're in fastboot mode type
Code:
fastboot oem unlock
on your device, press Vol Up and then accept with Power button
Now your bootloader is unlocked and you can flash the new recovery!
Flashing a new recovery:
1) While in Fastboot mode flash the recovery image with the following command :
Code:
fastboot flash boot recovery.img
WARNING! DO NOT LOCK YOUR BOOTLOADER AGAIN OR THE DEVICE WILL FACTORY RESET BY ITSELF!
2) Now you can Normal Boot your N1 .
3) A Black screen with 2 advice will appear .
-Start by pressing power button
-Factory reset by pressing Volume Buttons.
4)PRESS POWER BUTTON
5)The green droid will display and now you can enter in recovery pressing Power button + Vol Up (DO NOT HOLD THEM)
6)go to " Apply update from ADB" with Vol buttons then enter pressing Power button
7) Upload stock FMB19 update with the following command:
Code:
adb sideload A5FMB19_update.zip
Wait for it to install.
.
.
.
.
8) Lock your bootloader by
Code:
fastboot oem lock
when in fastboot mode
9) Enjoy your Google played Nokia N1
p.s. 1st boot up will take a while
I would like to express my most greetings to jemyzhang who made up the guide on "How to root A5CNB19 & A5FMB19"
If you have any kind of problem please contact me or write below this post so everyone can have a line-guide to follow in case of diseases
Click to expand...
Click to collapse
Will this procedure work on a A5CNB19 5.1.1 that has no root and locked bootloader? What are the chances for it to get bricked? Thanks in advance
PS: there are a couple of techies in tailand that say they are able to install CHPlay trough Teamviewer
http://giaiphapandroid.blogspot.pt/2017/06/

The A5FMB19_update.zip download server is now offline. Does anyone have the zip still?

Strangereal said:
The A5FMB19_update.zip download server is now offline. Does anyone have the zip still?
Click to expand...
Click to collapse
I think I should have it. I'll check this afternoon and I will try to upload it somewhere. Thank you :good:
Sent from my Asus ZenFone 2 Laser (ZE500KL) using XDA Labs

Will this procedure work on a A5CNB19 5.1.1 that has no root and locked bootloader? What are the chances for it to get bricked? Thanks in advance
PS: there are a couple of techies in tailand that say they are able to install CHPlay trough Teamviewer
Click to expand...
Click to collapse
You shouldn't try Teamviewer with this kind of "techies" . They can do something bad with your PC or your device as well, I don't trust this kind of things.
Anyways i was stuck in a A5CNB19 without root acces and google play services. To "unlock" my N1 I downgraded it first at the 5.0.1 (I don't remember the firmware code) and then i flashed the Taiwan version (A5FMB19) which actually has Google Play Services installed. Anyways i'm coming with bad news. Unfortunatly I don't have the files you need to downgrade and then to upgrade, anymore. You should try to check out here on XDA if someone has these kind o files. I'll check somewhere if I'm able to download them again and upload them on google drive or something different. Hope I helped you

TheDuke94 said:
You shouldn't try Teamviewer with this kind of "techies" . They can do something bad with your PC or your device as well, I don't trust this kind of things.
Anyways i was stuck in a A5CNB19 without root acces and google play services. To "unlock" my N1 I downgraded it first at the 5.0.1 (I don't remember the firmware code) and then i flashed the Taiwan version (A5FMB19) which actually has Google Play Services installed. Anyways i'm coming with bad news. Unfortunatly I don't have the files you need to downgrade and then to upgrade, anymore. You should try to check out here on XDA if someone has these kind o files. I'll check somewhere if I'm able to download them again and upload them on google drive or something different. Hope I helped you
Click to expand...
Click to collapse
How did you downgrade back to 5.0.1? I'm in the same situation actually (currently on 5.1.1 A5CNB19). My N1 is mostly in good condition but it's completely dead in terms of software support so I thought maybe I could bring it back to life with Google Play store.

Strangereal said:
How did you downgrade back to 5.0.1? I'm in the same situation actually (currently on 5.1.1 A5CNB19). My N1 is mostly in good condition but it's completely dead in terms of software support so I thought maybe I could bring it back to life with Google Play store.
Click to expand...
Click to collapse
I flashed the original recovery of 5.0.1 by Fastboot flash recovery recovery.img and afterward adb sideload update.zip of the old recovery. Unfortunatly i don't have the files anymore so i'm not able to help you . Anyways these are the footsteps to bring back an old version
Sent from my Nokia N1 using XDA Labs

Ok thanks for helpign anyways

TheDuke94 said:
I think I should have it. I'll check this afternoon and I will try to upload it somewhere. Thank you :good:
Sent from my Asus ZenFone 2 Laser (ZE500KL) using XDA Labs
Click to expand...
Click to collapse
Q:
I found it is still unavailiable. Could you please tell how to get this images A5FMB19? thank you in advance.

wang990099 said:
Q:
I found it is still unavailiable. Could you please tell how to get this images A5FMB19? thank you in advance.
Click to expand...
Click to collapse
I was trying to obtain the image but i'm not able to find it anymore. This weekend i'm going to make an OS image with firmware and update. I'm sorry to keep you waiting
Sent from my Nokia N1 using XDA Labs

TheDuke94 said:
I was trying to obtain the image but i'm not able to find it anymore. This weekend i'm going to make an OS image with firmware and update. I'm sorry to keep you waiting
Sent from my Nokia N1 using XDA Labs
Click to expand...
Click to collapse
Any news about that image you're trying to create? Thanks

Got a bad news people, there's no way to find an image file and also, since my N1 is not rooted anymore, i'm not able to find a way to get the image. If someone of you gots a A5FMB19 I , and also the other users will be very gratefull. I apologize for the disguise

See my thread here for the ROM files.
And thanks @TheDuke94 for the helpful how-to!

online.id said:
See my thread here for the ROM files.
And thanks @TheDuke94 for the helpful how-to!
Click to expand...
Click to collapse
Wow! I don't know where you found this rom, but I'm now downloading to have a backup change and I'm going to upload it on Mega to keep this little secret online.
You rock dude
Sent from my Nokia N1 using XDA Labs

TheDuke94's methos worked well for my N1. Just saved it from being 'bricked'.
Really wanna thank you.
It's now 5.1.1. No longer update available. But still fine for me.

siemens_wolf said:
TheDuke94's methos worked well for my N1. Just saved it from being 'bricked'.
Really wanna thank you.
It's now 5.1.1. No longer update available. But still fine for me.
Click to expand...
Click to collapse
Glad it worked! I had the same issue when tried to flash magisk xD anyways still not able to do that, but I'll try to install a lineage OS or something lime that. Unfortunatly, N1 is a Foxconn device so nowadays Nokia (HMD Global) doesn't have anything to bring back to life this device (which still has great hardware specs). BUT I hope a ROM will come for N1 , cause it is a Stock Android device
Sent from my Nokia N1 using XDA Labs

TheDuke94 said:
Glad it worked! I had the same issue when tried to flash magisk xD anyways still not able to do that, but I'll try to install a lineage OS or something lime that. Unfortunatly, N1 is a Foxconn device so nowadays Nokia (HMD Global) doesn't have anything to bring back to life this device (which still has great hardware specs). BUT I hope a ROM will come for N1 , cause it is a Stock Android device
Sent from my Nokia N1 using XDA Labs
Click to expand...
Click to collapse
Just tell us how to flash LineageOS when you secceed. LineageOS was a much better choice for older devices. I just flashed 14.1 for my N7, and it revived. With normal usage, around 5 hrs. SOT, thanks to LineageOS. As I checked, there has been no such Lineage file for Nokia.N1, which was X86-base chip.
Nokia/Foxconn no longer supports N1 device. And it was so pity! N1 is much better off when comparing specs with Nexus.N7. I can get also 5 hrs. SOT with N1 on average usage, but with much brighter screen. And it's faster than N7. So, LineageOS would be a great choice for N1.
All the best wishes to you, TheDuke94. And hope the LineageOS for N1 will come, not long in the future.

Ok people, got strange news.
First , using this method -----> https://forum.xda-developers.com/nokia-n1/development/iovyroot-nokia-n1a5cnb19-a5fmb19-t3466897 I was unable to set root. Then , i rebooted my device, tried again and the result was this :
Now , I downloaded Root Checker in the playstore and it says I don't have Root Permission I think the thing will be much easier using Magisk Manager

Not a geek, really can't help much…but hope everything's good with you, @TheDuke94.

Any Good news, since Apple just released new iPhones?