Develop Bugs

SPH710T-(sprint prepaid) ODIN prob

I bought this samsung galaxy the T model. I rooted using ODIN>CWM>SUPERSU. Now i want to install wickedXrom but I have to update the bootloader to ND8 I believe or else risk bricking my phone. I've downloaded the philz recovery to odin flash it to my phone, but it doesnt show up after I click AP on ODIN, even though i have TWO philz recovery files in the folder. I tried removing ".md5" from the name and it turned into a zip file and that didnt help at all. The problem I'm having is with oDIN. If i try to flash "L710-ND8-Bootloader" I get a fail. If i try to flash philz it wont even show up under pda...
I've been researching and looking around for hours now before i finally decided to make a post.

Spidakid said:
I bought this samsung galaxy the T model. I rooted using ODIN>CWM>SUPERSU. Now i want to install wickedXrom but I have to update the bootloader to ND8 I believe or else risk bricking my phone. I've downloaded the philz recovery to odin flash it to my phone, but it doesnt show up after I click AP on ODIN, even though i have TWO philz recovery files in the folder. I tried removing ".md5" from the name and it turned into a zip file and that didnt help at all. The problem I'm having is with oDIN. If i try to flash "L710-ND8-Bootloader" I get a fail. If i try to flash philz it wont even show up under pda...
I've been researching and looking around for hours now before i finally decided to make a post.
Click to expand...
Click to collapse
It's good you're getting a fail. This doesn't apply to the L710T Model. Simply go to post #4 of my thread and there is a link to a tutorial on how to flash with the L710T Model. I'll update the OP to include this information so no one gets confused.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My ROMs: Wicked X & Wicked S5 Xperience

these are the instructions.. they're pretty simple but at #4 that file doesnt show up when I click PDA
1. Extract Download file
2. Put phone into download mode (power off, then power button + Volume Down, then volume up when prompted)
3. Open Odin (right click > open as administrator)
4. Load File L710VPUCND8_L710SPRCND8_L710VPUCND8_HOME.tar.md5 into the PDA slot
5. Start flashing
6. Grab some popcorn because it will take a while

Cant get to recovery

Hi guys.
I hope you can help me with this problem.
I was trying to root my samsung galaxy tab 3 (gt-p5220) with odin everything seemed to have worked out ok.
And it was a green box in odin with pass on it.
But now it is stuck on the SAMSUNG GALAXY TAB 3 logo and i cant get to the rocover (power + volume up + home button).
I have tryed everything with search on google and in this forum but i cant find a solution.
Can you please help me?

szander said:
Hi guys.
I hope you can help me with this problem.
I was trying to root my samsung galaxy tab 3 (gt-p5220) with odin everything seemed to have worked out ok.
And it was a green box in odin with pass on it.
But now it is stuck on the SAMSUNG GALAXY TAB 3 logo and i cant get to the rocover (power + volume up + home button).
I have tryed everything with search on google and in this forum but i cant find a solution.
Can you please help me?
Click to expand...
Click to collapse
I own a p5220 too, here whats I recommend you to do, download stock firmware here:
I THINK YOU BETTER DOWNLOAD ANDROID 4.4.2 KIT KAT VERSION AND I CAN GIVE YOU THE ROOT FILE I USED ON MY DEVICE!
Firmwares for P5220 *You will need to register* :
Gt-P5220:http://www.sammobile.com/firmwares/database/GT-P5220/
and choose the one matches your region and flash it via odin (extract the .tar.md5 from the zip and select pda and tick auto reboot and F.Reset Time)
and you will get a total clean stock recovery and maybe a stock clean rom too.
then here is whats next,
download this, its a TWRP Recovery for P52xx series: chrome://mega/content/secure.html#!kEUzAS5a!a6TA0xuSg-pEYxSmZxnjmcB7cNOwRCZ_MqMiwXvD65c
extract the .tar.md5 from the zip and flash it with odin (Untick auto reboot) and it in to the pda section and flash it.
you should get the twrp recovery.
and you should be able to boot into twrp recovery
UPDATE.ZIP (THE ROOT FILE FOR ANDROID KITKAT p5220)

Thanks i will try it tonight and will write if it worked.
The link for TWRP did not work.
And the superSU am i going to copy to my sd card without unzip and install from TWRP.
Am i right ???

szander said:
Thanks i will try it tonight and will write if it worked.
The link for TWRP did not work.
And the superSU am i going to copy to my sd card without unzip and install from TWRP.
Am i right ???
Click to expand...
Click to collapse
@szander
yeap. are you sure the link is not working? just copy and paste it into your web address bar.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Nope it is not working.
I have both paste it and written it myself but no, webpage can not be found.
Is there any other link that i can use?

szander said:
Nope it is not working.
I have both paste it and written it myself but no, webpage can not be found.
Is there any other link that i can use?
Click to expand...
Click to collapse
try this https://mega.co.nz/#!kEUzAS5a!a6TA0xuSg-pEYxSmZxnjmcB7cNOwRCZ_MqMiwXvD65c
or this

[Recovery][E9/E9+] TWRP Recovery 3.0.0-1 (UNOFFICIAL)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download
E9 A53ML
https://www.androidfilehost.com/?fid=24421527759886207
E9+ A55ML
https://www.androidfilehost.com/?fid=24421527759886208
Install
View attachment ADB-Windows.rar
Code:
adb reboot download
fastboot flash recovery <filename>

For e9s nothing? A50aml.

Venozer said:
For e9s nothing? A50aml.
Click to expand...
Click to collapse
Try this, but I'm not sure it works fine or not, so test it by yourself.
https://www.androidfilehost.com/?fid=24421527759886645

cannot flash tecovery for me please help E9+ A55ML

nua69 said:
cannot flash tecovery for me please help E9+ A55ML
Click to expand...
Click to collapse
please show me the flash log.

Installation of this version was as usual, smooth as silk.
Love the newly added features.
E9+ A55ML

sabpprook said:
please show me the flash log.
Click to expand...
Click to collapse
adb cannot reconize a recovery image and dint know file twrp-3.0.0-1-a55ml_dtul

nua69 said:
adb cannot reconize a recovery image and dint know file twrp-3.0.0-1-a55ml_dtul
Click to expand...
Click to collapse
drag the file into terminal window instead of typing filename.

nua69 said:
adb cannot reconize a recovery image and dint know file twrp-3.0.0-1-a55ml_dtul
Click to expand...
Click to collapse
1. Download the file twrp-3.0.0-1-a55ml_dtul.img from the link on Post 1.
2. Copy this file to the ADB/Fastboot folder.
3. Power Off your phone.
4. Press Power + Volume Down for 7-10 Seconds.
5. You may reach Download Mode directly , or if you reach Bootloader, use volume button to highlight Download Mode and push Power button.
6. Check at the top to make sure that bootloader is unlocked. (You cannot flash if the status says Locked or Relocked)
7. Connect your phone to computer using USB-MicroUSB cable
8. Run Command Line Window from ADB/Fastboot folder.
9. Type : fastboot flash recovery twrp-3.0.0-1-a55ml_dtul.img
That's all.

hi
when i try to backup my ROM, it brings System and System Image in the menu options.
Is it necessary to select System Image in the menu options or only System is enough ?
thx
Sent from my HTC One E9PLUS dual sim using Tapatalk

Works well on E9
Thanks again for the upload. Flashing went well, without any problems, on E9 (not plus) TW version 1.50.709.3.
:good:

What features does this have over 2.8?
Thanks

The links are not working
The link for HTC one e9s is not working.

[OneUI 3.0 ] For Samsung galaxy s10+ SM G975F

Hello everyone ,
Today i successfully installed android 11 on my galaxy s10+ ( sm-g975f )
buy downloading another rom from https://samfw.com/
Here is what i did :
1) go to this link and download the rom https://samfw.com/firmware/SM-G975F
2) then a choosed this rom https://samfw.com/firmware/SM-G975F/AUT
3) i installed it it with odin by following this instructions :
3.1. Open Odin execute file
3.2. Reboot Samsung phone in Download Mode (hold Home + Power + Volume Down buttons / hold Volume Down + Bixby buttons then plug-in cable)
3.3. Connect you Samsung phone and wait until you get a blue sign in Odin
3.4. Add the 1 file Samsung firmware to AP/PDA or 4 files Samsung firmware (AP/BL/CP/CSC) to it's slots
3.5. Make sure re-partition is NOT ticked
3.6. Click the START button, sit back and wait few minutes
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
then the result is :
Hope you like it

Reserved

does this wipe the data on ur phone meaning after i flash the update i have to download everything again?

yosefcrdbl said:
does this wipe the data on ur phone meaning after i flash the update i have to download everything again?
Click to expand...
Click to collapse
i did a clean install so yes mate

f you select HOME_CSC_* in the package your data will be preserved.

lunkwell said:
f you select HOME_CSC_* in the package your data will be preserved.
Click to expand...
Click to collapse
but the system will be unstable because you changed the androd version from 10 to 11
so do a clean installation much safer

Most S10 users will never wipe their devices (I haven't ever for that matter, too many settings to wade through) so going from 9 to 11 has been absolutely fine.

my redmi note8 pro is bricked. NEED A HELP PLEASE

After these actions, my phone became a brick. I need help, what should I do? I tried to flash the phone through SP Flash, but it gives me an error
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

harturicko said:
After these actions, my phone became a brick. I need help, what should I do? I tried to flash the phone through SP Flash, but it gives me an error
View attachment 5745107
Click to expand...
Click to collapse
Keep phone connected (dont change USB port). Open bypass again. Hold Power+ Vol up until it show Protection disable. Then press Download on SP flash tool. Redo 2-3 times.

Kirasu2080 said:
Keep phone connected (dont change USB port). Open bypass again. Hold Power+ Vol up until it show Protection disable. Then press Download on SP flash tool. Redo 2-3 times.
Click to expand...
Click to collapse
Yes, I already managed to fix it and installed the firmware. But never got around to installing TWRP. After I install TWRP on the phone, I start a cycle of reboots and nothing else, and so I've reflashed and tried differently every time, but still can't get TWRP installed. Maybe you know how to solve this problem?

harturicko said:
Yes, I already managed to fix it and installed the firmware. But never got around to installing TWRP. After I install TWRP on the phone, I start a cycle of reboots and nothing else, and so I've reflashed and tried differently every time, but still can't get TWRP installed. Maybe you know how to solve this problem?
Click to expand...
Click to collapse
Your current Miui version?

Kirasu2080 said:
Your current Miui version?
Click to expand...
Click to collapse
I put the firmware 11 miui and android version 9

Kirasu2080 said:
Your current Miui version?
Click to expand...
Click to collapse
oh sorry my android 10v

harturicko said:
oh sorry my android 10v
Click to expand...
Click to collapse
Type this on Google: brp 3.5.2 v2.7 pling
And download exactly that version.
This TWRP is for Miui 12.0.x and custom rom based on that.