Here is what I did:
Installed stock test KDZ using LG Flash Tool2014
Rooted via one click
Fixed partition size
Installed flashily
Installed TWRP via flashily
Installed stock 4.4 rooted rom from XDA
Flashed stock recovery from XDA
And then ?
this will remove EVERYTHING from your device.. apps, contacts, anything in the internal storage.... everything but the SD Card
move the CM12.1\CM13 file (leave it as zip file) (of your device v400\v410\v700...) and GApps file (leave it zip as well) (from opengapps.org (ARM) or any other good source but make sure it's nano or pico and the version that is compatible with the Android version (CM12.1 >> 5.1.1 CM13 >> 6.0.1) ) move them to your SD Card (External).
go to TWRP.. (the same way as you enter factory reset menu then choose > yes > yes).
backup your rom to SD card.
then choose wipe > Advanced wipe > check system + data + dalvic + cache + internal storage (MAKE SURE YOU DON'T CHECK EXTERNAL STORAGE) swipe to wipe.
then go back.. install .. choose zip.. choose External Card and choose the CM file.. swipe .. again install then choose GApps file.. after that there is an option wipe dalvic and cache.. choose it.. then Reboot and DONE!
have a good time
Dr.TheMaster said:
this will remove EVERYTHING from your device.. apps, contacts, anything in the internal storage.... everything but the SD Card
move the CM12.1\CM13 file (leave it as zip file) (of your device v400\v410\v700...) and GApps file (leave it zip as well) (from opengapps.org (ARM) or any other good source but make sure it's nano or pico and the version that is compatible with the Android version (CM12.1 >> 5.1.1 CM13 >> 6.0.1) ) move them to your SD Card (External).
go to TWRP.. (the same way as you enter factory reset menu then choose > yes > yes).
backup your rom to SD card.
then choose wipe > Advanced wipe > check system + data + dalvic + cache + internal storage (MAKE SURE YOU DON'T CHECK EXTERNAL STORAGE) swipe to wipe.
then go back.. install .. choose zip.. choose External Card and choose the CM file.. swipe .. again install then choose GApps file.. after that there is an option wipe dalvic and cache.. choose it.. then Reboot and DONE!
have a good time
Click to expand...
Click to collapse
THANKS YOU OS MUCH！Now i find i cannot flash CANDYROm ,
I stayed in the brush machine interface for a long time , but it is not successful , so I can only flash KDZ :crying:again
Related
I've installed Elk759 version 0.33 on my HTC Desire:
- boot into recovery
- do cache wipe
- do data wipe
- install from sdcard (ROM and gapps) as recommended by Elk759
When I now reboot the phone I only see the image of CyanogenMod10 and the boot does not go to the end. So my phone is currently not functioning.
Any suggestion what I can do?
I have the same problem. Any info would be grand <3.
me to
i have the sam problem > and i am trying to solve it
if u have a solution post it please
Which hboot?
Sd-ext partition and file sistem?
S-off or not?
.
.
.
See this thread http://forum.xda-developers.com/showthread.php?t=1891231
I had the same problem but solved by reformattig the sd card from the recovery console.
1) boot recovery console
2) go to advanced
3) choose partition SD.
Choos the size you want. i choos 1024MB which i think is the space to install apps.
Next is the swap partition choose 256MB.
reboot and it should be working..
Yes you should make a backup of your SD card if you want to keep you data.
gogi2x said:
I've installed Elk759 version 0.33 on my HTC Desire:
- boot into recovery
- do cache wipe
- do data wipe
- install from sdcard (ROM and gapps) as recommended by Elk759
When I now reboot the phone I only see the image of CyanogenMod10 and the boot does not go to the end. So my phone is currently not functioning.
Any suggestion what I can do?
Click to expand...
Click to collapse
ur stuck n a bootloop
goto recovery
1.format boot
2.format system
3.format data
4.format cache
5.format sd-ext (IF YOU HAVE IT)
6.install rom again/restore from a nandroid backup
Hi there!
I'm willing to perform an absolutely clean install of a ROM and want to format all partitions in recovery, even the internal sdcard, system etc... Doing so will remove my current ROM I suppose, so I won't be able to boot up the phone only to recovery or download mode. But in recovery I can't access the phone's memory so I won't be able to put the zip file back after formatting.
I used to install ROMs on my old Desire HD this way:
1. Wipe data/Factory reset
2. Clear cache + Dalvik
3. Format all partitions (boot system etc.)
4. Format SD card
5. Toggle USB storage
*PC detects phone*
6. Copy file
7. Install zip
Is it a proper way of insaltalling ROMs on Note 2 also? If yes how do I put the .zip file on the phone?
Thank you for the help!
Regards,
robi54321
Sent from my GT-N7100 using xda app-developers app
Hi everyone ,
i cannot install this ROM on my galaxy w recovery mode
because of this message " E:short write of /tmp/sideload/package.zip (no space left on device) "
i cannot use Odin because kies doesn't see the phone.
the ROM installed is CyanogenMod 10.2 - Alpha 4 - 20131123 (4.3.1)
elabaseey said:
Hi everyone ,
i cannot install this ROM on my galaxy w recovery mode
because of this message " E:short write of /tmp/sideload/package.zip (no space left on device) "
i cannot use Odin because kies doesn't see the phone.
the ROM installed is CyanogenMod 10.2 - Alpha 4 - 20131123 (4.3.1)
Click to expand...
Click to collapse
Do a full wife before you install new ROM.
For installation, first, make sure you got your ROM and the correct Gapps on your External SD Card.
After that, enter CWM and:
select "wipe data / factory reset"
go to "mounts & storage" and format /system. This is extremely important!
under the same menu, format /sdcard (be careful NOT to format /external_sd by mistake)
install ROM (from the external sd)
install Gapps (from the external sd)
reboot your phone
Please, note that every step of this tutorial is mandatory! Credit to Arsradu
select "wipe data / factory reset" i did that but i this line
.
.
.
1." go to "mounts & storage" and format /system."
2. under the same menu, format /sdcard not there.
i installed CMW
it works i don't know what to say thank you
:good::good::good::good:
elabaseey said:
i installed CMW
it works i don't know what to say thank you
:good::good::good::good:
Click to expand...
Click to collapse
NP bro, glad it worked
No space left
Hi
I have a Galaxy i9000 with Gingerbread XWJVI
I have CWM recovery 2.5.1.2
ROM Manager 5.5.3.7 (if I select "New start with recovery" it end with ...verification failed...)
If I restart in Manual mode (loud+start+menu)
then problem with...no space left on device.... message after wiping cache, data/factory reset and trying to "apply update from sdcard"
Sorry but I do not know where to find this:
...go to "mounts & storage" and format /system. This is extremely important!
....under the same menu, format /sdcard (be careful NOT to format /external_sd by mistake)
I suppose mnt/sdcard but I do not see any /system and what do you mean with format ?
What am I doing wrong ?
thanks
dec0der said:
Do a full wife before you install new ROM.
For installation, first, make sure you got your ROM and the correct Gapps on your External SD Card.
After that, enter CWM and:
select "wipe data / factory reset"
go to "mounts & storage" and format /system. This is extremely important!
under the same menu, format /sdcard (be careful NOT to format /external_sd by mistake)
install ROM (from the external sd)
install Gapps (from the external sd)
reboot your phone
Please, note that every step of this tutorial is mandatory! Credit to Arsradu
Click to expand...
Click to collapse
Thank you so much. Solved my space problem with CM 11! :good::good::good:
Hey,
Had tried to upgrade from CM11 2014-08-01 to CM11 2014-12-10 (the version not (!) having the changed partition layout).
Configuration before upgrad was:
CM11 2014-08-01, CWM v6.x
What I did:
-) Used ROM Manager to do Backup of existing ROM -> failed (not enough memory on SD card/internal), tried again after changing ROM Manager settings to write backups onto external SD -> failed again (i.e. didn't even start; extenal SD has ~5GB free, so no space issue there).
-) Then I noticed that suddenly ROM Manager said it was running on v5.x (but I had v6.x installed). Did upgrade to v6.0.5.1. Worked.
-) Then used CWM to boot into recovery and install CM11 build 2014-12-10 (file: cm-11-20141210-UNOFFICIAL-ancora.zip in external SD and MD5 checked to be OK). Then in CWM did the following:
-) install zip from external SD -> started OK but stopped once installing from zip (progress bar did not start to show anything and did not appear even after 30min). Phone did no longer boot (Samsung logo apears then Sampsung Galaxy logo but w/o CyanogenMod logo then black screen...)
-) took battery out, back in and into CWM recovery (still v6.0.5.1)
-) wipe data
-) wipe cache
-) wipe dalvik cache (in advanced)
-) format system
-) format cache
-) mount USB and download the and then downloaded cm-11-20141210-UNOFFICIAL-ancora.zip again onto external SD
-) interestingly, only the external but not (!) the internal/SDcard is visible in Windows explorer ?!?
-) tried again to instal from external SD -> failed again with same issue as stated above.
Please help me getting my Galaxy W back to working order!
Many thanks in advance,
Frugi
For what I have read probably you have the wrong recovery. the recovery on the cm11 thread, if I'm not wrong) is not compatible to the version you are trying to install.
Try to flash the last recovery in the thread and the last version of cm11 which is from 23-12.
I did not update since i buy. It is 2.3.6 gt8160.
http://forum.xda-developers.com/galaxy-ace/ace-2-develop/rom-cyanogemod-13-sergeyl-t3277418 i like this rom, i want to install but i am not sure about steps. I tried a lot of things but now it is staying on a screen in recovery mode.
Fİrstly i need root.
so i tried this http://forum.xda-developers.com/showpost.php?p=27610432&postcount=31
are there any ways because i couldnot manage with this.. After
3) Switch off the phone and enter to download mode ("Vol Down + Home + Power").
Wait until the driver will be installed and Odin will recognize the phone!
it stays in downlading please dont turn off targe.t
After root, i want to install CWM because i know it from my previous phone. i used it. to install it, i will use this
http://forum.xda-developers.com/showthread.php?t=2141395
is it correct? after root , i should do this.
and after those 2 installations, i can flash rom
http://forum.xda-developers.com/galaxy-ace/ace-2-develop/rom-cyanogemod-13-sergeyl-t3277418
with those steps. RighT?
1. Download CM13 and GAPPS files
2. Copy the zips in the external memory card
3. Boot in CWM or TWRP recovery
4. For CWM: Select "Wipe Data / Factory Reset" - "Wipe cache" - "Wipe Dalvik"
5. Choose "Install Zip from external storage"
6. Select CM13 file
7. Choose "Install Zip from external storage"
8. Select GAPPS file
9. Go back to the root of the CWM, and select "reboot system now"
10. Done! First boot takes a while, be patient
11. Ignore message about SD card after CM13 first boot:
Formatting SDcard as internal storage will ruin it (don't format / encrypt)
Please give me suggestions if i am doing wrong.