Code:
I'm not responsible for what you do to your device,
this is official software downloaded from Sammobile
and uploaded to different mirrors to spread availability.
This is the stock MODEM, BOOTLOADER, and ROM from Sammobile uploaded for all of you guys.
WARNING: There is a possibility that some of the ROMs may not work since they've been designed for the Lollipop (DOK2) bootloader. I have not tested yet if CF-Autoroot works.
Edit #2: There seems to be no ROOT as of now!
Edit #3: AFTER FLASHING TWRP VIA ODIN, I CAN'T BOOT.
Edit #4: I am able to boot after flashing via odin. I was just being a derp and kept doing it wrong. If you can't get passed the splash screen all you need to do is factory reset and that seems to have fixed it for me. TL;DR I now have Systmless root, TWRP, and on MM for T-Mobile (EPE3)
Steps to get this working:
Boot into download mode.
Have odin opened and ready.
Make sure your device is plugged in to your computer.
Now click AP, add the file you extracted from the .rar you downloaded. (For example: N910TUVU2EPE3_N910TTMB2EPE3_N910TUVU2EPE3_HOME.tar.md5)
Now press start!
After it's done, you're going to want to do the same thing but with TWRP. Remember to click AP and not CP.
Now via TWRP, flash the latest Systemless Root by Chainfire
You should now be able to boot into the ROM.
Downloads:
T-MOBILE ROM, BOOTLOADER, AND MODEM (mega.nz mirror)
N910T3 ROM, BOOTLOADER, AND MODEM (mega.nz mirror)
ROGERS ROM, BOOTLOADER, AND MODEM (mega.nz mirror) Requested by @_Jax_
TWRP (Download the .tar)
ODIN
Nice super fast upload. Thank you.
justforgot said:
Nice super fast upload. Thank you.
Click to expand...
Click to collapse
No problem! 3 minutes left If anyone wants it on Mega I'll upload it there as well.
Nice !
MisterCoolBeans said:
No problem! 3 minutes left If anyone wants it on Mega I'll upload it there as well.
Click to expand...
Click to collapse
I would! Thanks so much. :good:
Alright it finished uploading! As of now you can't root it, I've already tried using @TEKHD 's CF-Autoroot method, and I've also tried flashing the latest Systemless root from Chainfire, I tried changing the kernel as well. If you try rooting you can't get past the "Samsung Galaxy Note 4 Powered By Android" Splash screen. :/
EDIT: Factory resetting using Samsungs recovery seems to have fixed it for me. I believe it might fix it for anyone else stuck on the splash screen as well.
MisterCoolBeans said:
Alright it finished uploading! As of now you can't root it, I've already tried using @TEKHD 's CF-Autoroot method, and I've also tried the flashing the latest Systemless root from Chainfire, I tried changing the kernel as well. If you try rooting you can't get past the "Samsung Galaxy Note 4 Powered By Android" Splash screen. :/
Click to expand...
Click to collapse
Wow. So what happens now? Wait for Chainfire to hopefully root this or can the devs do it with their roms?
TEKHD had mentioned to someone in his thread not to update incase they locked the bootloader. Daaaaaaamn.
_Jax_ said:
Wow. So what happens now? Wait for Chainfire to hopefully root this or can the devs do it with their roms?
TEKHD had mentioned to someone in his thread not to update incase they locked the bootloader. Daaaaaaamn.
Click to expand...
Click to collapse
I actually do think it's locked.. Let me update the OP
So, I was able to boot before. However, once you flash TWRP via odin, you can no longer boot up anymore. Let me know if anyone has the same experience.
http://forum.xda-developers.com/showpost.php?p=67507913&postcount=40
One person say they got systemless root
louforgiveno said:
http://forum.xda-developers.com/showpost.php?p=67507913&postcount=40
One person say they got systemless root
Click to expand...
Click to collapse
That's really strange, I wonder how they got it. I can't get passed the boot screen if I flash systemless root. I'll keep trying though!
Possibly what I'm experiencing may be due to me being a derp and flashing via CP instead of AP. I'm going to try flashing everything through AP instead.
Any chance for a T3 version? I can't download from sammobile - it gives me a bunch of errors (404, 502...)
vponomarev said:
Any chance for a T3 version? I can't download from sammobile - it gives me a bunch of errors (404, 502...)
Click to expand...
Click to collapse
No problem, downloading from here http://www.sammobile.com/firmwares/download/76563/N910T3UVU1EPE3_N910T3TMB1EPE3_TMB/
Will upload asap
I'm uploading MM N910T3: ETA 26 Minutes. Will upload everything to Mega as well as requested.
MisterCoolBeans said:
I'm uploading MM N910T3: ETA 26 Minutes. Will upload everything to Mega as well as requested.
Click to expand...
Click to collapse
Awesome! Thanks.
now if we could get a deodexed zip....that'd be icing on the cake
And what are your thoughts on the official MM from Tmo? Overall good or?
free4flight said:
And what are your thoughts on the official MM from Tmo? Overall good or?
Click to expand...
Click to collapse
Well, it could definitely use a debloat! It feels very cluttered and slow because of the bloat
MisterCoolBeans said:
Well, it could definitely use a debloat! It feels very cluttered and slow because of the bloat
Click to expand...
Click to collapse
I figured you say that, we are spoiled with the roms here and debloating would always be favorable... thanks for your work on this.
free4flight said:
I figured you say that, we are spoiled with the roms here and debloating would always be favorable... thanks for your work on this.
Click to expand...
Click to collapse
No problem! Hopefully our Note 4 overlords will cook something for us soon. Can't wait! I uploaded Rogers MM and the N910T3 MM as well. I updated the OP.
hey guys is this bootloader really locked? or has anyone for sure got root and twrp?
Related
I need to return this phone back to Samsung to repair my broken USB. But I need to flash it back to unroot it and flash it back to stock.
I have no USB capabilities whatsoever.
I have tried Mobile ODIN but this phone model is not currently supported or it doesn't detect the model.
I have been reading for hours now and I have not found a definitive solution that works for this phone.
Does anyone have any advice?
Does anyone know where I can find this?
http://forum.xda-developers.com/showpost.php?p=19746620&postcount=35
He was linking to a flashable stock rom, kernel and recovery. The link is now gone... But this is what I need. something flashable since USB is gone.
Maybe someone knows how to make stock flashable? Or if anyone has a backup that is fully stock everything and is willing to help me out that would also be awesome.
Please please please please please!!! I need help!
MystikMajik said:
Does anyone know where I can find this?
http://forum.xda-developers.com/showpost.php?p=19746620&postcount=35
He was linking to a flashable stock rom, kernel and recovery. The link is now gone... But this is what I need. something flashable since USB is gone.
Maybe someone knows how to make stock flashable? Or if anyone has a backup that is fully stock everything and is willing to help me out that would also be awesome.
Please please please please please!!! I need help!
Click to expand...
Click to collapse
You can use FUS Downloader to get the odin flashable tars or use the links provided below. I recommend you use fus downloader if you can, as it has faster download speeds though.
http://www.hotfile.com/dl/159042353/c56b0ab/T989DTLLE4_T989DTLLE4_TLS.zip.html - Telus ICS
http://www.hotfile.com/dl/159504252/d690f93/T989UVLE1_T989TMBLE1_TMB.zip.html - T-Mobile ICS
http://fus.nanzen.se/ - Check Fus Downloader
namanjr said:
You can use FUS Downloader to get the odin flashable tars or use the links provided below. I recommend you use fus downloader if you can, as it has faster download speeds though.
http://www.hotfile.com/dl/159042353/c56b0ab/T989DTLLE4_T989DTLLE4_TLS.zip.html - Telus ICS
http://www.hotfile.com/dl/159504252/d690f93/T989UVLE1_T989TMBLE1_TMB.zip.html - T-Mobile ICS
http://fus.nanzen.se/ - Check Fus Downloader
Click to expand...
Click to collapse
Thanks for the response! I feel like I'm on my own here...
Is this flashable with CWM? I have no ODIN capabilities. No USB. And Mobile ODIN doesn't work for this phone...
MystikMajik said:
Thanks for the response! I feel like I'm on my own here...
Is this flashable with CWM? I have no ODIN capabilities. No USB. And Mobile ODIN doesn't work for this phone...
Click to expand...
Click to collapse
It's odin only, but i can convert it for CWM if you like. Did you buy it from Telus, Koodo, or T-Mobile?
namanjr said:
It's odin only, but i can convert it for CWM if you like. Did you buy it from Telus, Koodo, or T-Mobile?
Click to expand...
Click to collapse
Its Telus! If you can do that it would be awesome... I'm at my wits end... You'd be helping me a lot!
MystikMajik said:
Its Telus! If you can do that it would be awesome... I'm at my wits end... You'd be helping me a lot!
Click to expand...
Click to collapse
I should have it ready to download soon, I'm just adding the stock recovery and then i should be able to upload. I'll update this post when it's up and tested.
EDIT : It flashed me completely to stock without error, but it came out as 351MB so i need to find a new place to upload. Shouldn't be too much longer.
EDIT 2 : I have it uploading to Dev-Host now and should be up in about 30mins.
EDIT 3 : Uploaded here.
Well this has been quite the horrible week. I want to thank you for your work... Unfortunately it seems that I have lost root. In one of my previous attempts to go back to stock I flashed an unroot tmobile rom and it seems I'm now stuck with that and now unrooted. I'm guessing I'm screwed since there is no way to root without usb...
I want to shoot myself in the face...
Samsung is going to get a Telus S2 back with a Tmobile rom on it. There's no way they'll fix it now right?
Sent from my SGH-I897 using xda premium
MystikMajik said:
Well this has been quite the horrible week. I want to thank you for your work... Unfortunately it seems that I have lost root. In one of my previous attempts to go back to stock I flashed an unroot tmobile rom and it seems I'm now stuck with that and now unrooted. I'm guessing I'm screwed since there is no way to root without usb...
I want to shoot myself in the face...
Samsung is going to get a Telus S2 back with a Tmobile rom on it. There's no way they'll fix it now right?
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
It depends, do you still have a custom recovery? Also I know one-click root worked on Telus's Gingerbread rom so maybe a tool like that might work.
Well it's stock recovery now... And would one click work without usb?
Sent from my SGH-I897 using xda premium
have you tried to download su to see if maybe you just need to load that back up on your phone. If not there are programs like adbd Insecure adb wifi and goo manager that may somehow be able to get you back.
adbd Insecure - will allow you to push files over to your system even without root access
adb wifi - incase you need to send a recovery over to your sdcard and then use the proper commands to install
goo manager - has twrp 2.2.2.0 in it so if you install that program you flash their recovery through the app.
put the factory zip on your sdcard and hopefully voila!
Just some choices - hope one works and good luck
playya said:
have you tried to download su to see if maybe you just need to load that back up on your phone. If not there are programs like adbd Insecure adb wifi and goo manager that may somehow be able to get you back.
adbd Insecure - will allow you to push files over to your system even without root access
adb wifi - incase you need to send a recovery over to your sdcard and then use the proper commands to install
goo manager - has twrp 2.2.2.0 in it so if you install that program you flash their recovery through the app.
put the factory zip on your sdcard and hopefully voila!
Just some choices - hope one works and good luck
Click to expand...
Click to collapse
i just tried adbd on my own phone(since i never flashed back cm10 yet) and unfortunately when i start the app it asks for superuser.
Thanks for the replies! I'm gonna try goo manager right now...
But would something like this work?
http://forum.xda-developers.com/showthread.php?t=1501719
Update: Goo Manager isn't really doing anything unfortunately... It won't install anything I download. Seems simple enough so I'm sure I'm not doing anything wrong there...
Update #2: Yes. All of the above seem to need root, and since I don't have root...
Thank you playya for the sugesstions!
Thank you namanjr for doing that work... I wish I had waited longer to flash the rom I did!
I think its game over. I've been trying for a week and there's not a lot of options to flash stock, root/unroot if your USB is broken... which seems ridiculous to me but it is what it is...
namanjr said:
i just tried adbd on my own phone(since i never flashed back cm10 yet) and unfortunately when i start the app it asks for superuser.
Click to expand...
Click to collapse
My bad you do need root but damn goo won't let you flash recovery without root huh. Are you sure you can't put recovery image on sdcard and use adb wifi to send command to install recovery? Just thinking out loud
playya said:
My bad you do need root but damn goo won't let you flash recovery without root huh. Are you sure you can't put recovery image on sdcard and use adb wifi to send command to install recovery? Just thinking out loud
Click to expand...
Click to collapse
I don't think that will work, i used normal ADB to reinstall TWRP and it wouldn't flash until i used su.
What about this? http://www.xoomforums.com/forum/mot...a-update-zip-flash-through-recovery-wifi.html
Not our phone obviously... but with stock recovery shouldn't I be able to flash the official ota update? what is the stock recovery for?
EDIT: Sorry I'm just realizing the use of USB in that method... but still what is the stock recovery used for?
MystikMajik said:
What about this? http://www.xoomforums.com/forum/mot...a-update-zip-flash-through-recovery-wifi.html
Not our phone obviously... but with stock recovery shouldn't I be able to flash the official ota update? what is the stock recovery for?
EDIT: Sorry I'm just realizing the use of USB in that method... but still what is the stock recovery used for?
Click to expand...
Click to collapse
It can flashed OTA updates, signed zips/md5s, wipes cache partition, and factory restore. I tried the ODIN md5 file for stock and it never worked so unless someone cracks/or knows Samsungs signature i don't think it's much use. Also if you flash a rom for anything other then phones that are compatible with ours(I727, I717, etc), you will brick.
Hmmm... and I'm assuming there isn't somewhere you can download the official samsung OTA updates?
MystikMajik said:
Hmmm... and I'm assuming there isn't somewhere you can download the official samsung OTA updates?
Click to expand...
Click to collapse
I seen a link somewhere back when 2.3.6 came out for T-Mobile but it was only an incremental update and Telus doesn't have any OTA updates.
Hello, I used to be rooted with custom ROMs ect but went back to stock I317ATTALJ2 so I can give the phone to my daughter. Well everything went smooth until an update from AT&T came through and she ran it when the battery was at 21% but I'm not sure it that matter but didn't help in matters... Anyhow it ran the upgrade and on reboot it stayed on the Galaxy Note II screen and wont do anything but sit there. I let it sit for a long time before pulling the battery and booting but it goes to same screen and same thing. I can not get into recovery (Volume Up, Home, Pwr) but I can go into download mode. With the battery being so low I read that it charges while in download mode so for the remainder of the day I put the phone in download mode and plugged into charger.
Suggestions?
After you get it charged up some and you're in download mode. Just Odin back to stock Att firmware should fix the problem hopefully...
You can find the stock firmware here>> http://bit.ly/1HNVFVJ
Guess the phone didn't like that update ?.
Bajanman said:
After you get it charged up some and you're in download mode. Just Odin back to stock Att firmware should fix the problem hopefully...
You can find the stock firmware here>> http://bit.ly/1HNVFVJ
Guess the phone didn't like that update .
Click to expand...
Click to collapse
Ok, Ill give the stock firmware (At&t Firmware I317UCALJ2 Uploaded By-Bajanman) that Bajanman supplys ill let you guys know in an hour or two its downloading now. I did try re installing the stock firmware I had that worked the first time and it was from SamMobile and it too sent me to the Galaxy Note II screen and froze so its not looking good.....
Thanks!
Oxicottin said:
Ok, Ill give the stock firmware (At&t Firmware I317UCALJ2 Uploaded By-Bajanman) that Bajanman supplys ill let you guys know in an hour or two its downloading now. I did try re installing the stock firmware I had that worked the first time and it was from SamMobile and it too sent me to the Galaxy Note II screen and froze so its not looking good.....
Thanks!
Click to expand...
Click to collapse
Ok.
Hopefully everything works out next time around.
Another thing you could try is flashing which ever recovery you previously had installed. Last time I was having issues with something similar, after re flashing my recovery everything started working again. Just just a thought that might work.
I'm monitoring this thread too see what happens ok.
Bajanman said:
Ok.
Hopefully everything works out next time around.
Another thing you could try is flashing which ever recovery you previously had installed. Last time I was having issues with something similar, after re flashing my recovery everything started working again. Just just a thought that might work.
I'm monitoring this thread too see what happens ok.
Click to expand...
Click to collapse
Recovery? can I flash the stock recovery using ODIN? If so where do I get it.... I always have used TWRP I wanted to use custom ROMs never really experimented with anything else.
Oxicottin said:
Recovery? can I flash the stock recovery using ODIN? If so where do I get it.... I always have used TWRP I wanted to use custom ROMs never really experimented with anything else.
Click to expand...
Click to collapse
Yes you can flash a custom recovery from Odin. You just have to use the (Twrp) tar file found here>>>
http://bit.ly/1y0Tyg7
Find your device model and download the tar. And make sure you're downloading the correct file for your device ok!
I to use Twrp and luv it.?
OK, well its not looking good....
1) Flashed the stock firmware suggested...... Still get same results!
2) Flashed TWRP through ODIN and it made it to the same screen and froze. Did a battery pull and button combo and it wont go into recovery.
Is there a application that will force your phone into recovery and download modes? I remember back when I messed with the captivate there was a application someone built that did such a thing.
Any suggestions?
Oxicottin said:
OK, well its not looking good....
1) Flashed the stock firmware suggested...... Still get same results!
2) Flashed TWRP through ODIN and it made it to the same screen and froze. Did a battery pull and button combo and it wont go into recovery.
Is there a application that will force your phone into recovery and download modes? I remember back when I messed with the captivate there was a application someone built that did such a thing.
Any suggestions?
Click to expand...
Click to collapse
Not sure you were on the newer 4.4.2 bootloader or not. If it was on a newer bootloader then you won't be able to downgrade.. This might help you get the phone working again since you just flashed the original firmware.
Go to this thread here>>http://forum.xda-developers.com/showthread.php?t=2502464.
Download
4.3 Param.bin and Tz.img
http://d-h.st/OYC
Step 2 (no bootloader in here)
flash this to bring wifi back
but keep your knox free 4.1.2 bootloader.
Allowing you to freely flash between 4.1.2 roms and the latest 4.3 leak
Without having to one click,Keeping Wifi Throughout and removing Knox
Click to expand...
Click to collapse
Unzip, Boot into Download mode, Open ODIN, put tar file in PDS slot, click Start.
Then you can go here for the latest stock Att firmware. If the above steps don't help you, then you could try flashing one one the rooted stock packages from this thread.
Bajanman said:
Not sure you were on the newer 4.4.2 bootloader or not. If it was on a newer bootloader then you won't be able to downgrade.. This might help you get the phone working again since you just flashed the original firmware.
Go to this thread here>>http://forum.xda-developers.com/showthread.php?t=2502464.
Download
4.3 Param.bin and Tz.img
http://d-h.st/OYC
Unzip, Boot into Download mode, Open ODIN, put tar file in PDS slot, click Start.
Then you can go here for the latest stock Att firmware. If the above steps don't help you, then you could try flashing one one the rooted stock packages from this thread.
Click to expand...
Click to collapse
Ok that worked and it booted!!!! Now im on 4.1.1 with TWRP
Not really sure what I just did? Did I downgrade my bootloader? Also, now how do I get it to the most up to date version without this again?
I downloaded an app and it says im on.....
Bootloader Version: 1317UCUBMK6
Thanks!
Oxicottin said:
Ok that worked and it booted!!!! Now im on 4.1.1 with TWRP
Not really sure what I just did? Did I downgrade my bootloader? Also, now how do I get it to the most up to date version without this again?
Thanks!
Click to expand...
Click to collapse
Ok not is back working again, which is great news ?. Go to the link I posted for the stock firmware, and use the rooted one.
But first make a backup of your working system first ok.
Bajanman said:
Ok not is back working again, which is great news . Go to the link I posted for the stock firmware, and use the rooted one.
But first make a backup of your working system first ok.
Click to expand...
Click to collapse
Ok, Im On 4.3 now and its working great.... Thank You!
Oxicottin said:
Ok, Im On 4.3 now and its working great.... Thank You!
Click to expand...
Click to collapse
You're very welcome glad I could help fix it.
Have a good day...
Ok problem solved so unsubscribing from this thread. If you run into any other problems you can always hit me up thru pm ?.
Step one download full 5.1.1. Firmware from here LATEST OH6
https://www.androidfilehost.com/?fid=24052804347812539 thanks to @stangdriver44
Step 2 use odin 3.10. or smartswitch and flash full firmware if you need the link to latest odin let me know and I will post it
Step 3 Let phone boot up.... Turn off phone and go into download mode again, You do this by pressing
VOLUME DOWN, POWER, HOME BUTTON at the same time......... from here you go and flash this file thru odin one more time let it boot up, It might restart a couple of times since is rooting and you will have ROOT on 5.1.1
https://mega.co.nz/#!gwYkyDoT!T8KMjBvb5nXqmzlW6Jd0y-Yey0vx_DHUWOjxsWWgxz4 thanks @g.lewarne for this
Step 4- Which will be your Last step, This will be to get a custom recovery twrp on your device, You will need this if you want to flash any other roms, or files, If you want just root this step is not necessary........ So here we go same steps turn phone off and boot into download mode, and odin flash this file
And we got working TWRP v.2.8.7.1 thanks to @Aou
CONGRATULATIONS YOU ARE NOW ROOTED.............. ONLY CONTINUE IF YOU WANT TO FLASH TWRP A CUSTOM RECOVERY YOU MOST HAVE A 925T TMOBILE EDGE
Aou said:
Deleted & re-uploaded v9. It's working now, and just tested it: https://mega.co.nz/#!QBsXxLpb!QBP9zNinaHGaavn__EOn6vEyyehnutyFQ9ELwcfhEFU
The complete thread for twrp http://forum.xda-developers.com/tmo...recovery-twrp2-8-6-0-g925t-5-1-1-of6-t3143002
Click to expand...
Click to collapse
Flash this thru ODIN
I recommend to wipe your phone and start fresh for smoother performance but that is all up to you guys
gdmlaz said:
Step one download full 5.1.1. Firmware from here
http://forum.xda-developers.com/newthread.php?do=newthread&f=4196
Step 2 use odin 3.10. and flash full firmware if you need the link to latest odin let me know and I will post it
Step 3 Let phone boot up.... Turn off phone and go into download mode again, You do this by pressing
VOLUME DOWN, POWER, HOME BUTTON at the same time......... from here you go and flash this file thru odin one more time let it boot up, It might restart a couple of times since is rooting and you will have ROOT on 5.1.1
https://www.androidfilehost.com/?fid=24052804347764978 thanks @mikeyinid for this
Last step let twrp working same step turn phone up, boot into download mode, and odin flash this file
http://forum.xda-developers.com/showpost.php?p=61548356&postcount=570 thanks to @bigbiff for this
I recommend to wipe your phone and start fresh for smoother performance but that is all up to you guys
Click to expand...
Click to collapse
Actually credit for the rooted kernel goes to @g.lewarne, but thank you!
mikeyinid said:
Actually credit for the rooted kernel goes to @g.lewarne, but thank you!
Click to expand...
Click to collapse
will update thanks
gdmlaz said:
I'm getting stuck on a blackscreen for twrp so wait for this till i figure it out
Click to expand...
Click to collapse
So, go ahead and root but don't flash TWRP yet?
mzimmer88 said:
So, go ahead and root but don't flash TWRP yet?
Click to expand...
Click to collapse
Yea root works perfect..... Twrp I believe is for th 920 which gets us stuck in a black screen........ will have to wait for a working twrp for the edge
gdmlaz said:
Yea root works perfect..... Twrp I believe is for th 920 which gets us stuck in a black screen........ will have to wait for a working twrp for the edge
Click to expand...
Click to collapse
Okay, do you know if a factory reset will cause me to lose root? My battery is awful after the 5.1.1 OTA...
mzimmer88 said:
Okay, do you know if a factory reset will cause me to lose root? My battery is awful after the 5.1.1 OTA...
Click to expand...
Click to collapse
I believe it will...... You could just factory reset and then odin flash the 2nd file and you will have root back no big deal
https://www.androidfilehost.com/?fid=24052804347764978
ok problem I did steps above and root is good, but when I tried recovery im in black screen how to get out?? HELP
edit: never mind I found my way out
edit 2: I guess if I had read 100 % of above I would've seen that we still waiting on working twrp
1) Will this trip knox?
2) Will this work for the non-edge S6?
ipaq_101 said:
will this trip knox?
Click to expand...
Click to collapse
yes
lrmdaddy said:
ok problem I did steps above and root is good, but when I tried recovery im in black screen how to get out?? HELP
edit: never mind I found my way out
Click to expand...
Click to collapse
Yea do not flash TWRP I edited the first post..... Only way I found out how to get out of the black screen is reflashing the full firmware on top..... Or you could flash stock 5.1.1 recovery if you have it available
gdmlaz said:
Yea do not flash TWRP I edited the first post..... Only way I found out how to get out of the black screen is reflashing the full firmware on top..... Or you could flash stock 5.1.1 recovery if you have it available
Click to expand...
Click to collapse
all I did to get out of the dark of put phone into dl mode then out of dl mode and now is all good in s6 edge land...so if I under stand, we have root for s6 edge just no recovery?? im going to try twrp v2 just to see what happens
lrmdaddy said:
all I did to get out of the dark of put phone into dl mode then out of dl mode and now is all good in s6 edge land...so if I under stand, we have root for s6 edge just no recovery?? im going to try twrp v2 just to see what happens
Click to expand...
Click to collapse
yea exactly just root no recovery..... That will get you into another black-screen recoveries have to be matched to your android version...... if you can't get out of the black screen like before flash full firmware it won't wipe
gdmlaz said:
yea exactly just root no recovery..... That will get you into another black-screen recoveries have to be matched to your android version...... if you can't get out of the black screen like before flash full firmware it won't wipe
Click to expand...
Click to collapse
flashing firm ware now our v2 didn't work, I had try
I keep getting a security notice notification on top it's very annoying anybody know how to get rid of it
Do I need to download the 5.1.1 file if I am already on the official tmobile firmware of 5.1.1
rfgarza8 said:
Do I need to download the 5.1.1 file if I am already on the official tmobile firmware of 5.1.1
Click to expand...
Click to collapse
If you are not having problems with your OTA update you could just flash the 2nd file and you will have root..... Sometimes you have to flash it more than once...... If you are getting poor battery life I would suggest doing a factory reset and starting fresh
winco209 said:
I keep getting a security notice notification on top it's very annoying anybody know how to get rid of it
Click to expand...
Click to collapse
Same here trying to figure out how to make it stop
Using titanium uninstall smartswitch and securitylogagent and you won't get the notifications
If you want to keep smartswitch install this one that is modded after
http://forum.xda-developers.com/showpost.php?p=60155030&postcount=2905
gdmlaz said:
Same here trying to figure out how to make it stop
Using titanium uninstall smartswitch and securitylogagent and you won't get the notifications
Click to expand...
Click to collapse
Uninstall security log then it's fixed
I get this error: Custom Binary (Boot) Blocked by FAP Lock.
Anyone else getting this? How do I circumvent?
Super Anti-plumber Bros 2. presents: Marshmallow 6.0.1 leak with engineering bootloader for the SM-N910P.
Check out the screenshots below.
Here's what you need to know before installing:
-You will need to flash the updated bootloader (engineering) AND baseband. You can go back to lollipop, but will need to downgrade your bootloader back (I will link it) or your wifi will not turn on and your camera will be blurry and not focus. You may keep the baseband no matter what version you are on.
-This is an engineering build, so there are debugging apps and features turned on. While this has a very minor effect on performance, it has one nonetheless.
-This ROM takes a VERY VERY LONG TIME to boot. It took me almost 30 minutes and I almost gave up and thought I did something wrong. But, it is deodexed by default since it isn't production software.
-This ROM can be flashed with TWRP and does not replace your recovery.
-This ROM comes with a su binary, not SuperSU, but SuperSU 2.68 beta can be flashed to enable root (will link below).
--What does that mean? the ROM is partially rooted and adb shell will throw you into a root shell by default. Apps won't say you're rooted, but once you flash SuperSU 2.68 beta, it will work as normal.
Anyway, enough with all that crap. Here's what everyone really wants: Bootloaders and basebands are ODIN flashable TAR images. The ROM is flashable with TWRP.
Pre-flash:
Engineering bootloader: Download PB5 engineering bootloader
PB5 Baseband: Download PB5 baseband
ROM:
SM-N910P-PB5-ENG-Leak ROM: Download SM-N910P-PB5-ENG-Leak ROM
Post-flash: Want root?
SuperSU 2.68 BETA: Link to SuperSU 2.68 BETA thread
Looking for the original Odin TAR? WARNING: THIS WILL ERASE YOUR INTERNAL STORAGE
Download PB5 Odin TAR
Wanna downgrade? No problem:
OK1 bootloader: Download OK1 bootloader
OK1 baseband (OPTIONAL): Download OK1 baseband
Sweet! That's awesome. Can't wait to see what you amazing DEVS do for our devices with mm.
Sent from my SM-N920P using Tapatalk
Awesomeness!!!!!
Awesomesauce!! Can wait to take her for a run ?
fredgar75 said:
Sweet! That's awesome. Can't wait to see what you amazing DEVS do for our devices with mm.
Sent from my SM-N920P using Tapatalk
Click to expand...
Click to collapse
Well, until apktool gets updated to support Marshmallow we won't be able to properly decompile and build apk's & jars. So no custom mods or anything until apktool is updated. Its still cool to see what we can expect with the official M ota.
Is this a leaked build for the N910P or the N920P that has been ported? Just curious as in the OP it says 920 but the screenshots show 910.
Excellent work @freeza! Great having a path to return.
How's battery so far?
Sent from my SM-N920P using Tapatalk
bckoolaid said:
Is this a leaked build for the N910P or the N920P that has been ported? Just curious as in the OP it says 920 but the screenshots show 910.
Click to expand...
Click to collapse
Woops, typo. It is definitely for the N910P. Thanks for pointing that out!
You are the man bro. Thanks for all you do Freebroe.
Yessss you're the man ?????
Tried this ROM and the damn WiFi doesn't connect whatsoever
cobra360423 said:
Tried this ROM and the damn WiFi doesn't connect whatsoever
Click to expand...
Click to collapse
I have the same problem
I haven't tried the ROM yet but did you update the baseband and bootloader before flashing?
cobra360423 said:
Tried this ROM and the damn WiFi doesn't connect whatsoever
Click to expand...
Click to collapse
RonMac said:
I haven't tried the ROM yet but did you update the baseband and bootloader before flashing?
Click to expand...
Click to collapse
yes
I'm going to try the ROM later after the kids are in bed and see what happens.
tiger5969 said:
yes
Click to expand...
Click to collapse
I keep getting symlinks failed....
awesome i try this rom
Seems to be working now but it's laggy as hell and I keep getting some Network something crashed...
Edit: Can't get passed the setup wizard. Keeps lagging to hell and says NetworkSystem Provider Bootstrapper has stopped...
RonMac said:
I haven't tried the ROM yet but did you update the baseband and bootloader before flashing?
Click to expand...
Click to collapse
Yes updated everything and no wifi.
Had this issue as well. Didn't try to look into it but I just may now.. It could just be the build. Try setting secure storage to false in build prop
QK1 TAR File: https://www.androidfilehost.com/?fid=673791459329068925
Prior version if needed:
QJ1 TAR File: https://www.androidfilehost.com/?fid=889964283620769224
HOW TO ROOT USING MAGISK:
Flash stock with Odin. The latest build is posted above. Reboot and complete setting up the phone.
Download Magisk Zip and Magisk Manager APK (these are two different things, you need both) and place them on your phone. Download from https://magiskmanager.com/
Do the usual to enable Developer Options (tap on build number until you see it enabled) and set OEM Unlock ot on (this is a setting under developer options.) Make sure you do these steps.
Go into Download mode. Turn phone off. Hold Volume Down, Home and Power buttons. We'll do something similar in a minute.
Flash TWRP via Odin, but DO NOT REBOOT. TWRP is here, use the TAR file. https://dl.twrp.me/zerofltespr/
Manually Power phone down by holding the Power button a really long time.
Manually boot into Recovery. Hold Volume Up, Home and Power. You should now be in TWRP.
Use TWRP to flash the Magisk zip file. When you reboot, you should be rooted.
Reboot and install the Magisk APK. Allow "Unknown sources."
You can still root your phone using SuperSU, but I am not supporting that.
thank you for your link.
- have you got the latest PD2 rom file yet?
- does the TWRP work on PD2 build?
thanks again
Thank you so much for the help and the resources, i definetly would need to make nandroid backup so i won't go through that pain again lol c:
FYI, the new PD2 build is already updated...
http://samsung-updates.com/device/?id=SM-G920P
yaibakt said:
FYI, the new PD2 build is already updated...
http://samsung-updates.com/device/?id=SM-G920P
Click to expand...
Click to collapse
Thanks and I am grabbing that now, will post an Android File Host link. However, I am going to include a cautionary note until we clarify the situation with TWRP.
But I am glad that you pointed that out.
koop1955 said:
Thanks and I am grabbing that now, will post an Android File Host link. However, I am going to include a cautionary note until we clarify the situation with TWRP.
But I am glad that you pointed that out.
Click to expand...
Click to collapse
thank you for your download and upload work. it spends your time and stuffs.
also for the TWRP. I am waiting for the new TWRP version now.
cant live without being rooted nor xposed...
Amazing! If you want any help organizing or anything like that, feel free to let me know :good:
JoeFCaputo113 said:
Amazing! If you want any help organizing or anything like that, feel free to let me know :good:
Click to expand...
Click to collapse
Thanks, Joe. I think that the next step (and it won't be me!) is to do a video tutorial. A "How To Use" this stuff like Tim (QBKing) used to do.
did anyone have TWRP on the lastest PD2 yet?
im about to re-flash the rom this weekend and want to try the PD2.
if not, i guess i must stay at PB6
yaibakt said:
did anyone have TWRP on the lastest PD2 yet?
im about to re-flash the rom this weekend and want to try the PD2.
if not, i guess i must stay at PB6
Click to expand...
Click to collapse
yes,i have PD2 and TWRP 3.0.0.1.
everythings is ok.
note:dont root your phone with flashing supersu.zip (this method dont work good and have some issues)
use g920F (not g920P) cf auto root image (work great)
yaibakt said:
did anyone have TWRP on the lastest PD2 yet?
im about to re-flash the rom this weekend and want to try the PD2.
if not, i guess i must stay at PB6
Click to expand...
Click to collapse
I have twrp working on cpd2 ill see if i can find the link to the whole package
You gotta flash it via odin and it says for pb6 but during flash , it updates the firmware
Sent from my SM-G920P using Tapatalk
I didn't see this question is the pd2 link an update or a full wipe?
cyberone3 said:
I didn't see this question is the pd2 link an update or a full wipe?
Click to expand...
Click to collapse
Complete TAR file.
i confirm that the TWRP in #1 works with latest PD2.
yaibakt said:
i confirm that the TWRP in #1 works with latest PD2.
Click to expand...
Click to collapse
Thanks for this, have not gotten around to testing myself.
Could you post any feedback that you might have on PD2 itself? Worth bothering with, or just a minor security thing?
Im about to go get my new replacement S6 and have a feeling its going to be on the latest firmware so good to hear it works on Pd2. Well TWRP works on PD2what about flashing supersu 2.71 in twrp does that brick it? Or did u use cfautoroot?
Jimmy1life said:
Im about to go get my new replacement S6 and have a feeling its going to be on the latest firmware so good to hear it works on Pd2. Well TWRP works on PD2what about flashing supersu 2.71 in twrp does that brick it? Or did u use cfautoroot?
Click to expand...
Click to collapse
You'd be surprised actually, when I got my replacement, it came with the like second updat, lol
Jimmy1life said:
Im about to go get my new replacement S6 and have a feeling its going to be on the latest firmware so good to hear it works on Pd2. Well TWRP works on PD2what about flashing supersu 2.71 in twrp does that brick it? Or did u use cfautoroot?
Click to expand...
Click to collapse
Twrp and supersu 2.71 work for me.
Nothing noticeable between pd2 and pb6 actually so if you are still good on pb6, let it stay there.
BTW i get good battery life on pd2 as you can see my attached SS. Will pass 5 hrs sot easily, even more.
Sent from my SM-G920P using Tapatalk
@yaibakt, any chance you could edit your post to reduce the image size or just eliminate it, now that it has been seen?
Trying to keep the thread clean.
Thanks.
Ok, i will delete the image.
I upload directly from tapatalk app so i cant resize it.
Sent from my SM-G920P using Tapatalk