Related
Hi! i am new to the forum and have a Letv Le 1 Pro US with stock malware Rom.
I want to change to CM12.1 ROM v3 by BetaHydri. But have a few questions. I am in doubt in rooting stock rom and clean the trojans and adware or changing to this custom Rom.
The rom in question is in this thread, but i can't ask there:
http://forum.xda-developers.com/leeco-le1-pro/development/cm12-1-rom-betahydri-letv-1-pro-t3416651
1-My question is if the GPS works fine? In stock Malware Rom is very fast. I see some custom roms with gps problem.
2-4G data works well on Sim2? and Hotspot?
3-Is any major bug on this v3 Custom Rom?
4-How many free Ram is available? without installing other apps besides the ones that are in the ROM.
Thank You, especially the user @BetaHydri
i need your help too sir
cm-12.1-20160713-Bet…weakV3.zip501.1 MB , so the system just 500 mb?
now im still using eui with malware , so i just follow the installation step?
Tested V3 installation sequence
I went to TWRP 3.0.2 for a factory reset wipe
Installed ROM "cm-12.1-20160713-BetaHydri-CollapseTweakV3.zip"
Installed OpenGApps arm64 5.1 Nano
Installed all three ZIPs from DolbyAtmos Fix
Wiped Caches via TWRP
Rebooted
I'm on the V4, and actually everything seems good! Just have to test some sensors (Gyroscope)
Presidente_84 said:
Hi! i am new to the forum and have a Letv Le 1 Pro US with stock malware Rom.
I want to change to CM12.1 ROM v3 by BetaHydri. But have a few questions. I am in doubt in rooting stock rom and clean the trojans and adware or changing to this custom Rom.
The rom in question is in this thread, but i can't ask there:
http://forum.xda-developers.com/leeco-le1-pro/development/cm12-1-rom-betahydri-letv-1-pro-t3416651
1-My question is if the GPS works fine? In stock Malware Rom is very fast. I see some custom roms with gps problem.
2-4G data works well on Sim2? and Hotspot?
3-Is any major bug on this v3 Custom Rom?
4-How many free Ram is available? without installing other apps besides the ones that are in the ROM.
Thank You, especially the user @BetaHydri
Click to expand...
Click to collapse
everyone works mate just go ahead and install v4 cm
I'm on V3 and all seems ok, what's the differences between V3 & V4?
martinbanshee said:
I'm on V3 and all seems ok, what's the differences between V3 & V4?
Click to expand...
Click to collapse
"Only some build.prop changes as some folks reported problems. [...]
one of the main changes was this:
ro.telephony.default_network=22,22 and ro.ril.hsxpa=1
it was before
ro.telephony.default_network=10,10 and ro.ril.hsxpa=2"
So LTE and UMTS changes basically
Thanks, I'll try V4 for a few days and see how it goes.
Sent from Tapatalk
thank you all guys.
Now i am with the stock original ROM EUI without malware, without any problem.
Can anyone post some pictures or screenshots from CM 12.1 ROM v4?
to see the appearance of the system
Stiffrigg said:
I'm on the V4, and actually everything seems good! Just have to test some sensors (Gyroscope)
Click to expand...
Click to collapse
How about MHL TV-OUT & IR blaster?
hello guys, sorry for bad english, i have problem on CM 12.1 V3, when some call me or message come my flash blinking. How to fix that?
dragangiga said:
hello guys, sorry for bad english, i have problem on CM 12.1 V3, when some call me or message come my flash blinking. How to fix that?
Click to expand...
Click to collapse
BetaHydri said:
Hi,
you don't need to uninstall FlashRing.
With the Flash RIng App you can configure which APP and when the Flash should be used for notification.
View attachment 3819790
View attachment 3819791
View attachment 3819792
View attachment 3819793
View attachment 3819794
Click to expand...
Click to collapse
Sent from my LeTv 1 Pro using Tapatalk
letv le 1 pro
willngg said:
Sent from my LeTv 1 Pro using Tapatalk
Click to expand...
Click to collapse
i fix it
thanks a lot
System freezes when data connection switches to Edge
Hi All,
Using this ROM from BetaHydri, overall it works really good, however I have a problem that is getting annoying: whenever the phone switches to Edge from LTE/HSPA, the system freezes. As this can happen even in a staircase in an office building or on a train ride on the countryside it is rather vexing.
I have deleted the caches, but the issue persists.
Has anyone encountered the same problem maybe? Any ideas how to solve this?
Evaluation and some solutions
After some evaluation I can say this rom is really good.
There were some issues however:
I had sensors malfunctioning (gyro inverted). There is some discussion on this subject in Betahydri's developer thread, but I cannot post there as I'm considered a newbie by xda
Somehow the sensor calibration file (/persist/sensors/sns.reg) can get messed up. The trick is to delete the file, and on the next boot the system should replace it with the defaults, which are in /system/etc/sensors/sensor_def_qcomdev.conf. But this is not (always?) happening on this CM rom. What I did to resolve was to delete /persist/sensors/sns.reg, make a full TWRP backup, factory wipe, flash cuoco's 11s rom, start it, confirm if the gyro is working again, then restore the TWRP backup. Maybe there's a simpler way, but this worked.
I had a non-working notification LED. Wiping data in TWRP solved this, but I just had to find out what it was It turns out wiping the data of Settings Storage (com.android.providers.settings) was enough to restore the notification LED. The culprit is that there is a value in the settings.db of this component, in the system table called notification_light_pulse which was set to 0 somehow. Setting it to 1 with SQLite Editor (speed software) also solved the problem. There are more interesting values in this table by the way.
IR is not working, this is a known issue and I have no solution.
Double tap to wake does not work, at first I thought this would be a showstopper for me, but then I found out that with the Gravity Screen app, I can wake and sleep by using proximity and G sensors, which more than satisfies my needs for easy wake up and sleep.
OTG is not working natively, this can be overcome by third party apps like USB OTG helper. Could have something to do with fuse kernel modules not being available.
Volume level of ringer/notification is not calibrated, first step is already very loud and it doesn't change much if set higher. Does somebody now a solution for this?
I have dual SIMs and I could not switch one SIM to anything else than GSM only. Trick is to disable the other SIM, then set the network mode you want, and then re-enable the other SIM. There can be only one SIM for data, but somehow it wouldn't switch if the other SIM (that currently has the data) is still active.
If I find more, I'll post here.
Getting pretty bad battery drain. I went from 100% to 60% in a few hours and I didn't even use the phone, it was just sitting on standby
chr0m said:
Getting pretty bad battery drain. I went from 100% to 60% in a few hours and I didn't even use the phone, it was just sitting on standby
Click to expand...
Click to collapse
You can try to see what is happening with OS Monitor (from play store) In settings, enable expert mode to see the native Linux processes, try to find the one that is eating the cpu. I had this once, it was some media indexer process that would not stop (can't remember the exact name).
xposed
Hi all,
Since i cannot post in ROM's thread, i will ask here for your help. I am having a hard time installing Xposed on BetaHydri-CollapseTweakV4.
I get an error while fashing Xposed Framework xposed-v86-sdk22-arm64:
<<Xposed version: 86
! Wrong platform: arm
! This file is for: arm64>>
So i successfully flashed the arm framework (for 32 bit), for afterwards to install XposedInstaller_3.0_alpha4. But now i am getting "Xposed Framework installed, but now active."
Any idea? Thanks.
Am I am on TRWP 3.0.2.0 by CUOCO92, coming from Le1PRO_US_X800-ROW-PB-v60-CUOCO92-5.5.014S.
Hi all
I've got the US version and I'm with 12.1 v4.
I got only edge on data sim (the other is one only for calls)
Any ideas as I can't select any options but GSM from the hidden menu in *#*#4636#*#*?
Is it OK if I flash 14s Cuoco now as I'm in 12.1?
---------- Post added at 02:42 PM ---------- Previous post was at 02:28 PM ----------
I just followed #slidetowipe and now I got LTE
T H A N K Y O U M A N ! ! !
It's interesting how the same phone works differently for different people... what I mean is that the GPS on my phone is very bad - it was bad from the very beginning with factory ROM, with MrRusch ROM, different versions, gps.conf tweaks, etc.... Now I am using an external bluetooth GPS receiver as the fix was painfully slow or non-existent. Some people report no such problems, how can that be, I wonder?
Now I use CM 12.1 V4 ROM from BetaHydri, But I found some bugs :
1. Error clock / alarm... If I choose setting or an alarm clock, appeared notification "unfortunately, clock has stopped"
2. IR isn't working
3. And I have a problem with the network 4G LTE, where the issue there is no on EUI ROM
Please help me to fix it.
To be honest I prefer premises EUI ROM if there is not malware and adware, Is there EUI ROM clean of Malware and adware?
If there are please help me to link from the ROM and the way instal rom, because I was new in using x800.
And I had experienced hard brick at instal couco92 14S.
Thanks
Hey!
We've published our LineageOS 14.1 for everyone. You can found ROMS in Team Superluminal website.
Thanks and enjoy!
ekkilm said:
Hey!
We've published our LineageOS 14.1 for everyone. You can found ROMS in Team Superluminal website.
Thanks and enjoy!
Click to expand...
Click to collapse
Many thanks for your work :good:
We just recognize that the Safetynet compatibilyty is broken. But no worries. We’ll release update soon where that will be fixed.
And…
IR blaster will work too. ?
Stay tuned folks!
Good job
ekkilm said:
We just recognize that the Safetynet compatibilyty is broken. But no worries. We’ll release update soon where that will be fixed.
And…
IR blaster will work too.
Stay tuned folks!
Click to expand...
Click to collapse
Flashed and running well. :good:
I do not have VoLTE though. Hope that is added in the future. Everything else running smooth. Going to keep stay on this ROM for a bit.
Thanks for sharing!
ROM UPDATE
-Fixed SafetyNet compliancy
-Fixed IR Blaster
Edit.
Update is also available via OTA, so check your updaters!
Would it be possible to provide a ZIP to get IR working also for users of the "vanilla" LOS 14.1 weekly builds? Or will that not work due to missing kernel requirements?
Thanks for your rom!! Why you didnt create this post in the rom section?
What's the difference between this and stock LineageOS 14.1?
chemicalboyxda said:
Thanks for your rom!! Why you didnt create this post in the rom section?
Click to expand...
Click to collapse
Because we have our own forum in TS site. This is just a note/info that we've published our build
darkmuck said:
What's the difference between this and stock LineageOS 14.1?
Click to expand...
Click to collapse
Try and see
darkmuck said:
What's the difference between this and stock LineageOS 14.1?
Click to expand...
Click to collapse
Some minor tweaks.
For example:
- SafetyNet compliant by default (banking apps, etc.. works)
- Easy root install/uninstall in ROM Extra Settings
- IR Blaster works
- No cracking audio
- Prevent accidental wakeup works (also when waking w/ fingerprint)
- Browser that actually works by default (SWE Browser)
- Better snap camera by default (OmniRom snap)
- OTA
Probably forgot something..
I have a few questions about this ROM since I had installed a ROM from Lineage OS website (lineage-14.1-20170512-nightly-zl1-signed) yesterday and it has bugs in the most basic and essentials things... The most ridiculous bug is the phone app that doesn't show the call screen when I try to call someone or when I receive a call from someone, it only shows the notification that I missed my call... And my camera stopped working after I change the resolution to a higher one, that was currently available... I had managed to fix that after I installed an app called open camera from Play Store.
Besides that I loved the ROM it self since it was my first time trying a Lineage OS ROM, but before I try to flash the one that you have in your website I would like to know if there are any bugs related to the phone calls, alarm clock, music player and notifications...
Thanks in advance
rijrg4 said:
I have a few questions about this ROM since I had installed a ROM from Lineage OS website (lineage-14.1-20170512-nightly-zl1-signed) yesterday and it has bugs in the most basic and essentials things... The most ridiculous bug is the phone app that doesn't show the call screen when I try to call someone or when I receive a call from someone, it only shows the notification that I missed my call... And my camera stopped working after I change the resolution to a higher one, that was currently available... I had managed to fix that after I installed an app called open camera from Play Store.
Besides that I loved the ROM it self since it was my first time trying a Lineage OS ROM, but before I try to flash the one that you have in your website I would like to know if there are any bugs related to the phone calls, alarm clock, music player and notifications...
Thanks in advance
Click to expand...
Click to collapse
We haven't face those kind of issues in our rom Sounds pretty strange issues overall. Did you do full wipes before installation? What gapps? Any mods?
I recommended you to check our site, download the rom and READ install instructions before installation. Those are the basic steps for rom/gapps installation.
I installed today. The first problem that i have is that the root option of this rom didnt work right. I have to manually install supersu to get root.
Second the adaptative brigthness didnt work ok, like other 7.1 roms.
Third i installed in a x727 and the signal is weak. I installed the modem version of the 19s rom but didnt change. I selected LTE/WCDMA, the same.
And the last one and for me is a problem, its that CDLA headphones didnt work. I get the sound over the speaker of the phone.
Sorry for my english.
chemicalboyxda said:
I installed today. The first problem that i have is that the root option of this rom didnt work right. I have to manually install supersu to get root.
Second the adaptative brigthness didnt work ok, like other 7.1 roms.
Third i installed in a x727 and the signal is weak. I installed the modem version of the 19s rom but didnt change. I selected LTE/WCDMA, the same.
And the last one and for me is a problem, its that CDLA headphones didnt work. I get the sound over the speaker of the phone.
Sorry for my english.
Click to expand...
Click to collapse
No no no no... And no supersu.. read the FAQ. There is a guide how to enable root. It is addonSU
ekkilm said:
No no no no... And no supersu.. read the FAQ. There is a guide how you enable root. It is addonSU
Click to expand...
Click to collapse
?? Easy root (install/uninstall in ROM Extra Settings)
And the cdla??
chemicalboyxda said:
?? Easy root (install/uninstall in ROM Extra Settings)
And the cdla??
Click to expand...
Click to collapse
1. Still that is pretty easy, you just have to enable it.
2. Unfortunately we don't have CDLA headphone for now so we're unable to test it. But we might bought those so we can maybe fix it in the future.
ekkilm said:
1. Still that is pretty easy, you just have to enable it.
2. Unfortunately we don't have CDLA headphone for now so we're unable to test it. But we might bought those so we can maybe fix it in the future.
Click to expand...
Click to collapse
1. I did that but when the phone reboots root not present. I have to install manually.
2. Thanks!
chemicalboyxda said:
1. I did that but when the phone reboots root not present. I have to install manually.
2. Thanks!
Click to expand...
Click to collapse
So you did with this guide TS FAQ?
So as requested a new initial post with an updated link. This is not my work, neither am I involved in this project.
You can download the newest version from here: https://download.mokeedev.com/?device=nx563j
Thanks, I have downloaded and upload to Mega:
https://mega.nz/#!tBZCgRrQ!UIwhGOKrfHvIIZ4SMyVaWzTagpth7K17kVHey-h644w
I think file is damaged
I think that I found the font: http://blog.beizihulian.cn/post-23.html
Did you try to install this rom?
The Rom is super smooth. Haven't experienced any bug so far.
MacLaughlin said:
The Rom is super smooth. Haven't experienced any bug so far.
Click to expand...
Click to collapse
Hows the camera and video quality compared to stock? Have you noticed any bugs yet?
Stupid qn - do we need the ADT toolbox like the site says, or can we just flash with twrp? Could I also ask if Google Apps work fine with this custom rom? Currently away from home with work with limited data, but can't wait to try a custom rom out!
ım downloading now ı will ınstall ın a bıt and write down here lıttle guıde how ıt is.
sewkanteam said:
ım downloading now ı will ınstall ın a bıt and write down here lıttle guıde how ıt is.
Click to expand...
Click to collapse
So you want to try it?
I've just installed. Everything seems fine so far, including working gapps. Except Bluetooth audio. My bluetooth headsets connect successfully, but no sound.... I never used Mokee firmwares before, how often they bring new updates (nightly, weekly)?... I hope they'll fix bluetooth problem very soon....
ermacwins said:
Hows the camera and video quality compared to stock? Have you noticed any bugs yet?
Click to expand...
Click to collapse
Maybe I found a bug on camera app. The image quality is at 12mp. Seems only to be one of the sensors. I don't know if it's the same on stock camera app from nubia. Maybe someone on stock can try to pull the apk and I will try to install it.
dorkozoid said:
Stupid qn - do we need the ADT toolbox like the site says, or can we just flash with twrp? Could I also ask if Google Apps work fine with this custom rom? Currently away from home with work with limited data, but can't wait to try a custom rom out!
Click to expand...
Click to collapse
Adt isn't needed at all.. Google services work fine. No problems.
rasimyagubov said:
I've just installed. Everything seems fine so far, including working gapps. Except Bluetooth audio. My bluetooth headsets connect successfully, but no sound.... I never used Mokee firmwares before, how often they bring new updates (nightly, weekly)?... I hope they'll fix bluetooth problem very soon....
Click to expand...
Click to collapse
Mokee is pretty big. But more popular in Eastern countries. They have the same build policy as aicp f.e.
Thank you, working awesome, and gapps work. So quick and much better, I hope Nubia release an international ROM because I like their camera suite. Bluetooth is not working, but everything else is. To get into Fastboot mode it is Vol - and Power button, not Vol +/Pwr button as per the unlocking instruction in the other thread. This is just for other newbies like me that don't know no better.
How's the camera and video quality compared to stock? Better or worse?
ermacwins said:
How's the camera and video quality compared to stock? Better or worse?
Click to expand...
Click to collapse
they have more options but ıts not better.
rasimyagubov said:
I've just installed. Everything seems fine so far, including working gapps. Except Bluetooth audio. My bluetooth headsets connect successfully, but no sound.... I never used Mokee firmwares before, how often they bring new updates (nightly, weekly)?... I hope they'll fix bluetooth problem very soon....
Click to expand...
Click to collapse
No idea, it's unofficial, so it depends on the developer...
arceoxis said:
No idea, it's unofficial, so it depends on the developer...
Click to expand...
Click to collapse
Zip for debloat ROM: https://mega.nz/#!MdomCAwB!538ZJoNHosKh_viZ6lu1qy70Eko00Ay75MmNL48t-M4
ROM is working really good, could be perfect if Nubia Camera is added to it.
This is a fairly simple module that increases the mic volume for custom roms. Since a couple of months, mic volume became so low (I guess it happened after flex used xiaomi's Jan blobs in los16). This module just edits mixer_path_mtp file and raises the volume a bit. I've been using it for a month and no one complains about my low volume anymore.
This is not tested and will not probably work in stock rom since I remember that mixer_path file in stock is named something else and I don't remember it.
You may send me any mixer_path file in/vendor/etc/ and I will try to do the same edits and it would work.
Repo:
https://github.com/ahmedkassem56/tissot-mic-fix
Works perfectly (Revenge OS).
Thanks.
Is this a magisk module? How should I flash?
ranthhage said:
Is this a magisk module? How should I flash?
Click to expand...
Click to collapse
Yes it is a magisk module
Changelog for v2:
- Increase in-call volume
does it work on the official lineageos 16 ?
mmanius said:
does it work on the official lineageos 16 ?
Click to expand...
Click to collapse
Yes
Do i flash this? Im fairly new to this so help would really be much appreciated
jzhmrtn said:
Do i flash this? Im fairly new to this so help would really be much appreciated
Click to expand...
Click to collapse
This is a magisk module that you should flash using magisk manager. AFAIK, Most custom roms have fixed the issue and added similar changes so I don't think this is necessary anymore.
Ahmed Kassem said:
This is a magisk module that you should flash using magisk manager. AFAIK, Most custom roms have fixed the issue and added similar changes so I don't think this is necessary anymore.
Click to expand...
Click to collapse
Actually, it is necessary. I am having problems with my mic in my Samsung galaxy s6 with the unofficial resurrection remix os. Know any fix other than this? It didn't work for me, sadly.
jzhmrtn said:
Actually, it is necessary. I am having problems with my mic in my Samsung galaxy s6 with the unofficial resurrection remix os. Know any fix other than this? It didn't work for me, sadly.
Click to expand...
Click to collapse
Oh, this module is made for xiaomi mi a1 (tissot) and most probably your device will not boot or will boot with missed up sound configuration.
Ahmed Kassem said:
Oh, this module is made for xiaomi mi a1 (tissot) and most probably your device will not boot or will boot with missed up sound configuration.
Click to expand...
Click to collapse
I tried this and my phone booted up(thankfully) but yea, didn't fix anything. Thanks anyway.
Does it work in evolutionx rom
vp1072000 said:
Does it work in evolutionx rom
Click to expand...
Click to collapse
Yes it does
I've been having this problem on my Mi A2 Lite and found this thread while googling a solution.
Could this zip work for me? Or this will only work on the Mi A1?
I'm using Superior OS 9.0
Does it works with pixel experience 10 ?
It's called mixer_paths on my device. Where can I upload the file for you?
Doesn't work for me..
I thought my speaker broke, time to replace.
So unbelievable
I don't know how but this method for my silent mic works perfectly .
My specs. S7 edge (g935fd), LineageOS 17.1.
*fix 1 work
*fix 2 not work
Doesn't work in whyred PE rom plus addition
I flashed both versions to increase my mic volume so others ppl can hear me clearly but this doesnt work fine .. nothing changed still same low sound .. can u help me plz ?
Content of Opening Post removed on request of thread owner @Maitreya29
Added to the OnePlus 5 Index Thread here.
shadowstep said:
Added to the OnePlus 5 Index Thread here.
Click to expand...
Click to collapse
Thanks
Thanks for porting this ROM to our old OP5!
I'm on the 10.0 version of Pixel Experience, can I dirty flash on top of it ? Or do I need to erase everything before flashing this version ?
Adriench said:
Thanks for porting this ROM to our old OP5!
I'm on the 10.0 version of Pixel Experience, can I dirty flash on top of it ? Or do I need to erase everything before flashing this version ?
Click to expand...
Click to collapse
Clean flash please, you don't have to wipe internal storage if you do that btw.
Ok clean flash done! Everything seems to be working great!
Everything is fast and smooth! I have not spend enough time for now to see if there is any unusual battery drain.
There is only one minor thing: I can't activate gesture navigation and disable hardware keys (I got used to it with the previous Pixel Experiment version ) Is there something I am missing here ? or should I just be patient and maybe hope for it in a future release ?
Thanks again for the work you have done!
Adriench said:
Ok clean flash done! Everything seems to be working great!
Everything is fast and smooth! I have not spend enough time for now to see if there is any unusual battery drain.
There is only one minor thing: I can't activate gesture navigation and disable hardware keys (I got used to it with the previous Pixel Experiment version ) Is there something I am missing here ? or should I just be patient and maybe hope for it in a future release ?
Thanks again for the work you have done!
Click to expand...
Click to collapse
I noticed that isn't present also in Pixel Experience Android 11. Maybe it's a feature not implemented yet and we should wait. Because the Android 10 versions worked fine.
This one is a keeper
Being lazy I tried dirty flashing over YAAP since they come from the same family tree. All worked well and things are looking great. If I find something odd, I'll do a clean flash.
Thank you, Dev's, for all your work
Face unlock works like a charm!
Are you people trying to Kill XDA (that actually enabled all this) by posting only on Telegram?
Everything seems to work fine, as in rock solid. Ive enabled Face unlock and have a couple of feature request for upcoming builds. Assistive light for Face un-lock, and while you're at it, traffic indicator in taskbar (plenty apps for it just a nice to have) and lastly, I like battery to show % in taskbar without the Icon (text only).
This is Like OOS 10.0.1 BUT MUCH BETTER
does it support face unlock
Athreya11 said:
does it support face unlock
Click to expand...
Click to collapse
Works perfectly.
Hi,
I am on Resurrection Remix rom (https://forum.xda-developers.com/t/rom-official-op5-5t-10-resurrection-remix-11-nov-2020.4165947/) and I would like to try this rom. Can you tell what are the best step to go from RR rom to this one ?
Thanks in advance.
P.s. my phone is encrypted
Thanks developer. I have a question
1) Is there a recent app menu like Oreo and previous versions?
2) Is there a smartbar navbar option within the navigation buttons
3) Will the two features I mentioned above be added in future versions even if they are not now?
breath21 said:
Hi,
I am on Resurrection Remix rom (https://forum.xda-developers.com/t/rom-official-op5-5t-10-resurrection-remix-11-nov-2020.4165947/) and I would like to try this rom. Can you tell what are the best step to go from RR rom to this one ?
Thanks in advance.
P.s. my phone is encrypted
Click to expand...
Click to collapse
If your phone is encrypted wipe everything then on orangefox recovery click on format data option, format and flash
Maitreya29 said:
If your phone is encrypted wipe everything then on orangefox recovery click on format data option, format and flash
Click to expand...
Click to collapse
Ok thanks, do I need to flash no_verity_op5.zip also ? I am on TWRP recovery do I need to change for orangefox ?
The New XDA app is up and working.
Sent from my phone
I decided to do a clean install (dirtyflashed over YAAP before with everything working) just to make sure there was no issues with settings.
Two things came up after restoring all apps.
Android Auto has gone missing, it's installed on the phone but does not show up in the launcher (Nova or Pixel) I actually downloaded again from apk mirror and reinstalled but no difference.
Also, Nova no longer finds backups on the device storage? It does find backups on document storage.
All and any suggestions would be welcome, both of the above issues where not present after dirtyflash over YAAP???
thaidroid said:
I decided to do a clean install (dirtyflashed over YAAP before with everything working) just to make sure there was no issues with settings.
Two things came up after restoring all apps.
Android Auto has gone missing, it's installed on the phone but does not show up in the launcher (Nova or Pixel) I actually downloaded again from apk mirror and reinstalled but no difference.
Also, Nova no longer finds backups on the device storage? It does find backups on document storage.
All and any suggestions would be welcome, both of the above issues where not present after dirtyflash over YAAP???
Click to expand...
Click to collapse
Android auto is supposed to be in settings > connection preferences > Android Auto
thaidroid said:
Everything seems to work fine, as in rock solid. Ive enabled Face unlock and have a couple of feature request for upcoming builds. Assistive light for Face un-lock, and while you're at it, traffic indicator in taskbar (plenty apps for it just a nice to have) and lastly, I like battery to show % in taskbar without the Icon (text only).
This is Like OOS 10.0.1 BUT MUCH BETTER
Click to expand...
Click to collapse
thaidroid said:
This one is a keeper
Being lazy I tried dirty flashing over YAAP since they come from the same family tree. All worked well and things are looking great. If I find something odd, I'll do a clean flash.
Thank you, Dev's, for all your work
Face unlock works like a charm!
Click to expand...
Click to collapse
Adriench said:
Ok clean flash done! Everything seems to be working great!
Everything is fast and smooth! I have not spend enough time for now to see if there is any unusual battery drain.
There is only one minor thing: I can't activate gesture navigation and disable hardware keys (I got used to it with the previous Pixel Experiment version ) Is there something I am missing here ? or should I just be patient and maybe hope for it in a future release ?
Thanks again for the work you have done!
Click to expand...
Click to collapse
How's the battery life and how stable this rom is? Can I daily drive?