Related
I tried many times to root the phone, unfortunately i couldn't.
Special thanks to user destroyedbeauty, he adviced my ( in PM ) step by step how to do it, but still no success.I followed the steps very careful.
When i tried to root, i didn't check USB Debugging & Unknown Sources.
Should i ?
Is there a way to install apps which require root, on the phone with no root ?
Below are the steps i tried to root the phone, adviced by the mentioned user.
I rather recommend that you install an kernel with pre-configed root access (Doomkernel / Advanced Stock kernel / XzK-kernel) by using built-in Fastboot in Flashtool. By doing this method, do this!!!:
1) Download kernel ZIP from specific kernel thread in "Xperia Z (Original) Android Development" thread section. Take anyone of these below, I also link Advanced Stock Kernel if you want complete stock Sony kernel with added init.d / root / recovery add-on / built-in!;
a) Xz-Gaming v1.0
b) XzK-Kernel v11.0
c) Doomkernel v19
d) AdvancedStockkernel
OBS!! Choice latest kernel from list in each thread for getting latest kernel that is optimized and made for your installed FW. Otherwise, problems can occur..
2) Extract boot.img from downloaded ZIP and put boot-file in Flashtool > Firmwares. After this, copy the same zip to your phone external / internal-SD card. Leave it there and continue read..
3) Turn off your phone and hold volume up, then connect phone to USB-cable. Keep an eye on LED notify lamp, see if it blinking blue - then you're connected in fastboot mode between phone and PC!
4) Open up Flashtool and push on the "Bolt-Button". Select fastboot, then go to firmware subfolder in your Flashtool folder on HDD and select extracted boot.img. Read log in flashtool, read it carefully. If everything seems to be normal, disconnect your phone and boot it up.
5) Go into recovery mode by either hammering volume up / volume down button and then choice "Install ZIP" option. Search after your ZIP file in recovery that contains boot.img and wifi-specific modules (critical for getting working WIF / Bluetooth!!).
6) After completed flashing, wipe cache and Dalvik cache (Dalvik can be found under Advanced section in recovery).
7) Reboot and voilá! Enjoy your custom kernel!
I only tried with "AdvancedStockkernel"
After step 4, the display stays black, nothing happent, no boot, no Sony logo, nothing.
I want to mention one more think : when i unlocked the bootloader 2 days ago, i followed this link :
http://unlockbootloader.sonymobile.com/
It was successful.On the next step I was asked to write my email / imei / etc !!! Everything went ok.
After that, i tried to root and something went wrong, so i flashed whole .67 FTF in flashmode, again. Now is stock
Is the bootloader still unlocked, after i flashed .67 ftf in flashmode ? Could that be the reason i can't root the phone ?
Should i try again to unlock the bootloader, before i start again to root ?
Please help me guys.
Thank you
nex_t said:
I tried many times to root the phone, unfortunately i couldn't.
Special thanks to user destroyedbeauty, he adviced my ( in PM ) step by step how to do it, but still no success.I followed the steps very careful.
When i tried to root, i didn't check USB Debugging & Unknown Sources.
Should i ?
Is there a way to install apps which require root, on the phone with no root ?
Below are the steps i tried to root the phone, adviced by the mentioned user.
I rather recommend that you install an kernel with pre-configed root access (Doomkernel / Advanced Stock kernel / XzK-kernel) by using built-in Fastboot in Flashtool. By doing this method, do this!!!:
1) Download kernel ZIP from specific kernel thread in "Xperia Z (Original) Android Development" thread section. Take anyone of these below, I also link Advanced Stock Kernel if you want complete stock Sony kernel with added init.d / root / recovery add-on / built-in!;
a) Xz-Gaming v1.0
b) XzK-Kernel v11.0
c) Doomkernel v19
d) AdvancedStockkernel
OBS!! Choice latest kernel from list in each thread for getting latest kernel that is optimized and made for your installed FW. Otherwise, problems can occur..
2) Extract boot.img from downloaded ZIP and put boot-file in Flashtool > Firmwares. After this, copy the same zip to your phone external / internal-SD card. Leave it there and continue read..
3) Turn off your phone and hold volume up, then connect phone to USB-cable. Keep an eye on LED notify lamp, see if it blinking blue - then you're connected in fastboot mode between phone and PC!
4) Open up Flashtool and push on the "Bolt-Button". Select fastboot, then go to firmware subfolder in your Flashtool folder on HDD and select extracted boot.img. Read log in flashtool, read it carefully. If everything seems to be normal, disconnect your phone and boot it up.
5) Go into recovery mode by either hammering volume up / volume down button and then choice "Install ZIP" option. Search after your ZIP file in recovery that contains boot.img and wifi-specific modules (critical for getting working WIF / Bluetooth!!).
6) After completed flashing, wipe cache and Dalvik cache (Dalvik can be found under Advanced section in recovery).
7) Reboot and voilá! Enjoy your custom kernel!
I only tried with "AdvancedStockkernel"
After step 4, the display stays black, nothing happent, no boot, no Sony logo, nothing.
I want to mention one more think : when i unlocked the bootloader 2 days ago, i followed this link :
http://unlockbootloader.sonymobile.com/
It was successful.On the next step I was asked to write my email / imei / etc !!! Everything went ok.
After that, i tried to root and something went wrong, so i flashed whole .67 FTF in flashmode, again. Now is stock
Is the bootloader still unlocked, after i flashed .67 ftf in flashmode ? Could that be the reason i can't root the phone ?
Should i try again to unlock the bootloader, before i start again to root ?
Please help me guys.
Thank you
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=45974001 try this. For rooting you just need to check uknown sources and usb debugging mode
Sent from my C6502 using xda app-developers app
coolrevi said:
http://forum.xda-developers.com/showthread.php?p=45974001 try this. For rooting you just need to check uknown sources and usb debugging mode
Sent from my C6502 using xda app-developers app
Click to expand...
Click to collapse
Thanks a million, it was working. Now my phone is rooted, bootloader unlocked, and i want to install a CWM / TWRP custom recovery.
Would you please explain it to me how i have to proceed ?
Thank you.
nex_t said:
Thanks a million, it was working. Now my phone is rooted, bootloader unlocked, and i want to install a CWM / TWRP custom recovery.
Would you please explain it to me how i have to proceed ?
Thank you.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=40977606
Everything you need is in development section dude.. It's better to search instead of typing so much. Remember. just follow the procedure exactly..
Sent from my C6502 using xda app-developers app
Hello guys, i have a xperia ZQ C6503 Brazil, i want to unlock the bootloader , install a recovery and a stable cyanogen mod , but the cyanogen installer shows the device is not supported ( they are not equal the ZL ? ) , i want a correct step-by-step for this things i want, i am confused with tons of topics with differents things..
So i want a how-to Unlocka bootloader, install a custom recovery, how to root, and how to install the cyanogen mod without the windows installer if possible. thanks.
ZQ it's exactly the same of ZL, I don't know why Brasil changed the name, I have a ZQ and installed the cyanogenmod 11 for ZL and everything works, don't worry about that. I can see you're a little insecure, so I suggest READING MORE TOPICS. And make sure that you're installing everything for xperia ZL (ODIN) and not for the Z (yuga) or Z1.
First: read this .. http://forum.xda-developers.com/showthread.php?t=2201148 READ EVERYTHING, DOOMLORD IT'S THE MAN !
AFTER READING DOOMLORD'S TOPIC: IF it's not clear, you can read http://techglen.com/2013/11/28/install-android-4-4-kitkat-on-xperia-zl-with-cm-11/# and http://wiki.cyanogenmod.org/w/Install_CM_for_odin
Suggestion: Use flashtools to install the custom kernel (connect the phone in fastboot mode, click on the lightning, choose fastboot mode and choose install/flash custom kernel) it's way easier than using terminal.
After installing adb drivers, sony drivers, fastboot drivers, and etc ...
1) unlock bootloader
2) download the last cm11 nightly and google apps for android 4.4.2 (search on the cyanogen site)
3) on the phone: put the .zip on the root of sdcard ........... on the pc: extract the .zip on desktop (you're just gonna use boot.img)
4) shutdown the phone, plug the cable on the phone pressing VOLUME UP ( + ) , a blue led should appear
5) open flashtools, click on the lightning and choose fastboot mode, after choose install/flash custom kernel and choose the boot.img that you placed in the desktop
6) Unplug the cable and reboot the phone (or it'll reboot by itself) WHEN SONY LOGO APPEARS (A PINK LED WILL APPEAR, this is the phone telling you that you can press volume up (+) to open recovery), so, when the pink led appear push the volume up (+)
7) Now you're in clockworkmode recovery, wipe cache/data/dalvik, flash the rom, flash the gapps, flash the supersu.zip(if you want it rooted)
8) Reboot (it may take a while, up to 5 minutes)
9) Have fun
Rafael Luis said:
ZQ it's exactly the same of ZL, I don't know why Brasil changed the name, I have a ZQ and installed the cyanogenmod 11 for ZL and everything works, don't worry about that. I can see you're a little insecure, so I suggest READING MORE TOPICS. And make sure that you're installing everything for xperia ZL (ODIN) and not for the Z (yuga) or Z1.
First: read this .. http://forum.xda-developers.com/showthread.php?t=2201148 READ EVERYTHING, DOOMLORD IT'S THE MAN !
AFTER READING DOOMLORD'S TOPIC: IF it's not clear, you can read http://techglen.com/2013/11/28/install-android-4-4-kitkat-on-xperia-zl-with-cm-11/# and http://wiki.cyanogenmod.org/w/Install_CM_for_odin
Suggestion: Use flashtools to install the custom kernel (connect the phone in fastboot mode, click on the lightning, choose fastboot mode and choose install/flash custom kernel) it's way easier than using terminal.
After installing adb drivers, sony drivers, fastboot drivers, and etc ...
1) unlock bootloader
2) download the last cm11 nightly and google apps for android 4.4.2 (search on the cyanogen site)
3) on the phone: put the .zip on the root of sdcard ........... on the pc: extract the .zip on desktop (you're just gonna use boot.img)
4) shutdown the phone, plug the cable on the phone pressing VOLUME UP ( + ) , a blue led should appear
5) open flashtools, click on the lightning and choose fastboot mode, after choose install/flash custom kernel and choose the boot.img that you placed in the desktop
6) Unplug the cable and reboot the phone (or it'll reboot by itself) WHEN SONY LOGO APPEARS (A PINK LED WILL APPEAR, this is the phone telling you that you can press volume up (+) to open recovery), so, when the pink led appear push the volume up (+)
7) Now you're in clockworkmode recovery, wipe cache/data/dalvik, flash the rom, flash the gapps, flash the supersu.zip(if you want it rooted)
8) Reboot (it may take a while, up to 5 minutes)
9) Have fun
Click to expand...
Click to collapse
God bless u, haha thanks a lot dude, i will read all these stuff and try to install de cyanogen thanks !
Finally have a rooted D5322 (T2 Ultra Dual).
Requirements:
Unlocked bootloader.
Fastboot.
boot.img with custom recovery inside. I am using boot.img from CM11, extract it from here.
SuperSU-v2.46.zip
Here is the way:
1. Activate USB debugging.
2. Flash boot.img from the link above:
Code:
flashboot flash boot.img
3. Enter recovery mode, then install UPDATE-SuperSU-v2.46.zip.
4. Flash Lollipop firmware (19.3.A.0.470) but choose kernel only to be flashed (screenshoot attached).
5. Done!
NOTE: Will be updated when I meet better internet connection. Thanks.
UPDATE (28.04.2015) : Somebody reported that /system couldn't be edited. Root explorer cant mount /system as RW.
...
Are you able to boot into recovery after flashing lollipop?
triwira said:
Finally have a rooted D5322 (T2 Ultra Dual).
Requirements:
Unlocked bootloader.
Fastboot.
boot.img with custom recovery inside. I am using boot.img from CM11, extract it from here.
SuperSU-v2.46.zip
Here is the way:
1. Activate USB debugging.
2. Flash boot.img from the link above:
Code:
flashboot flash boot.img
3. Enter recovery mode, then install UPDATE-SuperSU-v2.46.zip.
4. Flash Lollipop firmware (19.3.A.0.470) but choose kernel only to be flashed (screenshoot attached).
5. Done!
NOTE: Will be updated when I meet better internet connection. Thanks.
Click to expand...
Click to collapse
Hai.. Can you upload your extracted boot.img n give us link....
Thanks
zpr06 said:
Hai.. Can you upload your extracted boot.img n give us link....
Thanks
Click to expand...
Click to collapse
here is only the boot.img https://mega.co.nz/#!2RFBFZoR!rVrdvLSnkdfe6VS3JLUDFRLmFRtHp7hmYs2jL7hT-PY
and
https://drive.google.com/file/d/0By76vyoKsLsUQ1poSTBINWRNbWc/view?usp=sharing
What if I blink 4.4.2 kernel, use the dualrecovery by nut, do the flashes and replace only the 5.0.2 kernel rom.470, can be silly that idea, will be running? I saw that the kernel of this lollipop. 470 is 3.4.0+ as in 4.4.3,Will be running? I'm thinking of trying,Sorry for the bad English,I am using translator..
Andrey Piekas said:
here is only the boot.img https://mega.co.nz/#!2RFBFZoR!rVrdvLSnkdfe6VS3JLUDFRLmFRtHp7hmYs2jL7hT-PY
and
https://drive.google.com/file/d/0By76vyoKsLsUQ1poSTBINWRNbWc/view?usp=sharing
Click to expand...
Click to collapse
Thank you Sir! :good:
I rooted my phone following this method. Titanium Backup worked fine, but Root Explorer can't change from R/O to R/W. I think it's not rooted 100%.
rooted with this method
but can anyone give me recovery zip so i can install it.and im not able to install busybox tried so many times please help.thanks for the post...
I had the same problem, including another rom I used method like the adb, root installs, but it is not complete ... off topic, I found this rom sucks, hangs straight
thacvu said:
I rooted my phone following this method. Titanium Backup worked fine, but Root Explorer can't change from R/O to R/W. I think it's not rooted 100%.
Click to expand...
Click to collapse
vishvanjay said:
but can anyone give me recovery zip so i can install it.and im not able to install busybox tried so many times please help.thanks for the post...
Click to expand...
Click to collapse
jacitdm said:
I had the same problem, including another rom I used method like the adb, root installs, but it is not complete ... off topic, I found this rom sucks, hangs straight
Click to expand...
Click to collapse
Thread updated, I got same problem.
If you want to edit contents of /system, install boot.img from cm-12-20150226, you still can boot to homescreen and getting full root access. But some drivers not work, so you cant change brightness, using camera, etc.
When u have finish, just flash stock kernel then every thing well work.
I'm downloading this 12 cm and I do hope it works, so do root to uninstall apps that do not use and other little things, Ro / rw is so precise WHAT ... thanks for as friend... ........ .Edit.......Then I flash this kernel, flash recovery and everything, I turn on the device, delete the apps I need to delete WHAT must install and reflash standard kernel ?? That's it?Then, after flash standard kernel I lose the option to change permissions or continue? Think back as it was right? thank you
triwira said:
Thread updated, I got same problem.
If you want to edit contents of /system, install boot.img from cm-12-20150226, you still can boot to homescreen and getting full root access. But some drivers not work, so you cant change brightness, using camera, etc.
When u have finish, just flash stock kernel then every thing well work.
Click to expand...
Click to collapse
Unsuccessfully, my d5322 not care with this kernel ...
Finally I get full root. My steps are:
1. Backup data, prepare following files:
a. Flashtool from http://www.flashtool.net/downloads.php
b. "PRFCreator v0.8.zip" from http://forum.xda-developers.com/crossdevice-dev/sony/tool-prfcreator-easily-create-pre-t2859904
c. Dual recovery "T2U-lockeddualrecovery2.8.14-RELEASE.flashable.zip" from http://nut.xperia-files.com/
d. "BETA-SuperSU-v2.49.zip" from https://download.chainfire.eu/740/SuperSU/BETA-SuperSU-v2.49.zip
e. CM11 boot image file "boot.img" from http://forum.xda-developers.com/showpost.php?p=60356750&postcount=4
f. OS 4.4.3 pre-rooted "T2 Ultra D5322.zip" from http://forum.xda-developers.com/t2-ultra/development/t2-ultra-d5303-4-4-3-pre-rooted-stock-t2962677
g. OS 5.0 ftf file "D5322_19.3.A.470_Customized IN PIEKAS.ftf" from http://forum.xda-developers.com/t2-ultra/development/5-0-2-ftf-19-3-470-d5322-t3091608
2. Use PRFCreator make flashable.zip file from OS5.0 ftf file + BETA-SuperSU-v2.49.zip + T2U-lockeddualrecovery2.8.14-RELEASE.flashable.zip like step 3 of this thread http://forum.xda-developers.com/t2-ultra/general/noobroot-lollipop-d5322-lb-ub-t3095090
3. Copy flashable.zip, T2 Ultra D5322.zip, T2U-lockeddualrecovery2.8.14-RELEASE.flashable.zip into phone
4. Flash CM11 boot.img in fastboot mode. Command: fastboot flash boot boot.img. While finish, reboot phone to recovery
5. FULL WIPE, Flash "T2 Ultra D5322.zip" and "T2U-lockeddualrecovery2.8.14-RELEASE.flashable.zip". Reboot phone normally, have rooted OS4.4.3. Can setup something and check root
6. Reboot to recovery again, flash OS5 flashable.zip file. NO WIPE
7. That's all. No issue. R/W works fine
thacvu said:
Finally I get full root. My steps are:
1. Backup data, prepare following files:
a. Flashtool from http://www.flashtool.net/downloads.php
b. "PRFCreator v0.8.zip" from http://forum.xda-developers.com/crossdevice-dev/sony/tool-prfcreator-easily-create-pre-t2859904
c. Dual recovery "T2U-lockeddualrecovery2.8.14-RELEASE.flashable.zip" from http://nut.xperia-files.com/
d. "BETA-SuperSU-v2.49.zip" from https://download.chainfire.eu/740/SuperSU/BETA-SuperSU-v2.49.zip
e. CM11 boot image file "boot.img" from http://forum.xda-developers.com/showpost.php?p=60356750&postcount=4
f. OS 4.4.3 pre-rooted "T2 Ultra D5322.zip" from http://forum.xda-developers.com/t2-ultra/development/t2-ultra-d5303-4-4-3-pre-rooted-stock-t2962677
g. OS 5.0 ftf file "D5322_19.3.A.470_Customized IN PIEKAS.ftf" from http://forum.xda-developers.com/t2-ultra/development/5-0-2-ftf-19-3-470-d5322-t3091608
2. Use PRFCreator make flashable.zip file from OS5.0 ftf file + BETA-SuperSU-v2.49.zip + T2U-lockeddualrecovery2.8.14-RELEASE.flashable.zip like step 3 of this thread http://forum.xda-developers.com/t2-ultra/general/noobroot-lollipop-d5322-lb-ub-t3095090
3. Copy flashable.zip, T2 Ultra D5322.zip, T2U-lockeddualrecovery2.8.14-RELEASE.flashable.zip into phone
4. Flash CM11 boot.img in fastboot mode. Command: fastboot flash boot boot.img. While finish, reboot phone to recovery
5. FULL WIPE, Flash "T2 Ultra D5322.zip" and "T2U-lockeddualrecovery2.8.14-RELEASE.flashable.zip". Reboot phone normally, have rooted OS4.4.3. Can setup something and check root
6. Reboot to recovery again, flash OS5 flashable.zip file. NO WIPE
7. That's all. No issue. R/W works fine
Click to expand...
Click to collapse
is all your root app's working fine till now?
no bootloop & other issues?
not root dear.
triwira said:
Finally have a rooted D5322 (T2 Ultra Dual).
Requirements:
Unlocked bootloader.
Fastboot.
boot.img with custom recovery inside. I am using boot.img from CM11, extract it from here.
SuperSU-v2.46.zip
Here is the way:
1. Activate USB debugging.
2. Flash boot.img from the link above:
Code:
flashboot flash boot.img
3. Enter recovery mode, then install UPDATE-SuperSU-v2.46.zip.
4. Flash Lollipop firmware (19.3.A.0.470) but choose kernel only to be flashed (screenshoot attached).
5. Done!
NOTE: Will be updated when I meet better internet connection. Thanks.
UPDATE (28.04.2015) : Somebody reported that /system couldn't be edited. Root explorer cant mount /system as RW.
...
Click to expand...
Click to collapse
not working brother
help me to rrot my d5322
triwira said:
Finally have a rooted D5322 (T2 Ultra Dual).
Requirements:
Unlocked bootloader.
Fastboot.
boot.img with custom recovery inside. I am using boot.img from CM11, extract it from here.
SuperSU-v2.46.zip
Here is the way:
1. Activate USB debugging.
2. Flash boot.img from the link above:
Code:
flashboot flash boot.img
3. Enter recovery mode, then install UPDATE-SuperSU-v2.46.zip.
4. Flash Lollipop firmware (19.3.A.0.470) but choose kernel only to be flashed (screenshoot attached).
5. Done!
NOTE: Will be updated when I meet better internet connection. Thanks.
UPDATE (28.04.2015) : Somebody reported that /system couldn't be edited. Root explorer cant mount /system as RW.
...
Click to expand...
Click to collapse
is this method work on 19.3.A.0.472
I saw this in facebook group "xperia t3 - india".. it seems we just need the camera to work
and 4G, and sdcard1...
vmlc said:
I saw this in facebook group "xperia t3 - india".. it seems we just need the camera to work
Click to expand...
Click to collapse
Hi i'm the guy how have cyanogen on my T3 , I just wanted to warn you for the rom, select the FXP-cm12-20150412...
And not the FXP-cm12.1 ...
otherwise your phone will bootloop, and when you make the first start of the phone , don't worry if after the bootanimation there's a black screen just wait 2-3 minutes for the update
So enjoy Cyanogen Xperia Users
fastbooking said:
Hi i'm the guy how have cyanogen on my T3 , I just wanted to warn you for the rom, select the FXP-cm12-20150412...
And not the FXP-cm12.1 ...
otherwise your phone will bootloop, and when you make the first start of the phone , don't worry if after the bootanimation there's a black screen just wait 2-3 minutes for the update
So enjoy Cyanogen Xperia Users
Click to expand...
Click to collapse
so, you confirm no 4g and camera working?
vmlc said:
so, you confirm no 4g and camera working?
Click to expand...
Click to collapse
yes no camera and 3G/4G
fastbooking said:
yes no camera and 3G/4G
Click to expand...
Click to collapse
also, you should do a detailed tutorial how to try the seagull build, i tried it the other day, but I couldnt do it....
vmlc said:
also, you should do a detailed tutorial how to try the seagull build, i tried it the other day, but I couldnt do it....
Click to expand...
Click to collapse
I will try tomorow there's a french tutorial about that here's the link for the one's who speak french
phonandroid.com/forum/post1800321.html (www . before its just because i can't now)
Cyanogen ROM are distributed in zip format, so you have to :
- push the zip file to your sdcard
- you need a kernel with recovery (for the time being, the Philz one)
- you enter in recovery mode
- you select "install zip" and the zip file.
once it's finished, install the right kernel
for that, on your PC, extract the boot.img file from the ROM zip file and flash it with flashtool or fastboot
reboot and enjoy
dan15 said:
Cyanogen ROM are distributed in zip format, so you have to :
- push the zip file to your sdcard
- you need a kernel with recovery (for the time being, the Philz one)
- you enter in recovery mode
- you select "install zip" and the zip file.
once it's finished, install the right kernel
for that, on your PC, extract the boot.img file from the ROM zip file and flash it with flashtool or fastboot
reboot and enjoy
Click to expand...
Click to collapse
ok, the part I dont get is: "once it's finished, install the right kernel
for that, on your PC, extract the boot.img file from the ROM zip file and flash it with flashtool or fastboot"
how do you do this?
dan15 said:
Cyanogen ROM are distributed in zip format, so you have to :
- push the zip file to your sdcard
- you need a kernel with recovery (for the time being, the Philz one)
- you enter in recovery mode
- you select "install zip" and the zip file.
once it's finished, install the right kernel
for that, on your PC, extract the boot.img file from the ROM zip file and flash it with flashtool or fastboot
reboot and enjoy
Click to expand...
Click to collapse
I don't install cyanogen like that,
First I update my phone with EMMA with the Open devices TA
-After I open the zip of the rom and i extract it somewhere you can find it
-take the zip AND THE GAPPS and connect your phone on usb for sending the zip on THE ROOT of your sdcard
-Enter in fastboot, and open flashtool (not emma the other)
-Flash the kernel called : boot.img
-Once Flashed reboot your phone in recovery (up button when the led is purple or violet)
-The led became gold color
- You now are (normaly) in cyanogen recovery
-Wipe data/Factory reset
-Wipe Cache for avoid bugs
-Now the fun part
-Apply update select the ROM and after the GAPPS
-Reboot and enjoy !
If the screen is black for a while after boot it's normal it's the system update
I also recommand you to take the
FXP-cm-12-20150412-UNOFFICIAL-seagull.zip
file because the other in cm12.1 are bootlooping
Now you can enjoy properly without camera and 3G/4G cyanogen
Sorry for my english I'm just a 14 french kid
btw, is this for 5102 or 5103? also, what do I have to be installed on my computer so I can flash boot for fastboot?
vmlc said:
btw, is this for 5102 or 5103? also, what do I have to be installed on my computer so I can flash boot for fastboot?
Click to expand...
Click to collapse
This is for D5103 the D5102 isn't the seagull this name is ONLY for the D5103
For the manipulation you will need emma (called flashtool by sony,for updating the bootloader)
And flashtool by Androxyde (this only is for flash kernel)
:highfive: now you're ready
Enjoy cyanogen on our t3 :laugh:
fastbooking said:
This is for D5103 the D5102 isn't the seagull this name is ONLY for the D5103
For the manipulation you will need emma (called flashtool by sony,for updating the bootloader)
And flashtool by Androxyde (this only is for flash kernel)
:highfive: now you're ready
Enjoy cyanogen on our t3 :laugh:
Click to expand...
Click to collapse
Im having problems flashing the kernel. I cant find my device in fastboot, and when I use flashtool to go ADB mode it says I dont have usb debugging on because I installed zip from recovery, the seagull file...
vmlc said:
Im having problems flashing the kernel. I cant find my device in fastboot, and when I use flashtool to go ADB mode it says I dont have usb debugging on because I installed zip from recovery, the seagull file...
Click to expand...
Click to collapse
Ok let's start off zero
you installed the zip via the philz recovery and after you wanted to flash the kernel ?
dan15 said:
Cyanogen ROM are distributed in zip format, so you have to :
- push the zip file to your sdcard
- you need a kernel with recovery (for the time being, the Philz one)
- you enter in recovery mode
- you select "install zip" and the zip file.
once it's finished, install the right kernel
for that, on your PC, extract the boot.img file from the ROM zip file and flash it with flashtool or fastboot
reboot and enjoy
Click to expand...
Click to collapse
thats what it says...
vmlc said:
thats what it says...
Click to expand...
Click to collapse
follow my tutorial it's the steps i followed and it works for me :good:
fastbooking said:
follow my tutorial it's the steps i followed and it works for me :good:
Click to expand...
Click to collapse
I got bricked meanwhile. Battery problem I think, not the first time...
ok, i think there is a missunderstanding.
in order to flash the kernel, you need to be in fastboot mode (with the blue light). so, once you have installed the zip file, shut down the phone (in recovery mode, select "power options/power off" , disconnect the phone and reconnect it in fastboot (maintain the vol up before and during the USB connection ).
you can now use "flashtool" (the Androxyde's one. to avoid confusion, the Sony's one is called EMMA or if it is more easy for you fastboot.exe
to use fastboot, you open a command line (Windows+R + type "cmd") , you go to the folder where the boot.img is and you enter the comand "fastboot flash boot boot.img". after ~2s the kernel is flashed, you can disconnect the phone and restart.
the first time, the boot time is about 5 min with a black screen after the animated screen, so wait a moment.
it's for that it's very important to have a well charged phone (min 40%) because the first start use a lot of battery, and you can't see anything.
I want to restore, I just installed the zip. Why cant I enter recovery?
edit: ok, I entered cyanogen recovery. will try to boot now. but I dont have backup/restore option....
edit2: ok, It booted but I still want to know how to back to previous version...
vmlc said:
I want to restore, I just installed the zip. Why cant I enter recovery?
edit: ok, I entered cyanogen recovery. will try to boot now. but I dont have backup/restore option....
edit2: ok, It booted but I still want to know how to back to previous version...
Click to expand...
Click to collapse
go on emma and select the android 4.4.4 update KK in the services line under open devices TA
It will restore the like the 1 st day but you will loose your data, but after you can install the philz recovery and restore the backup
The ziraat bank application does not open after installing twrp
can you help me
How to make the z5 premium custom recovery
or
how to find the z5 premium custom recovery
Or
How to delete twrp?
The final and out build for Z5p came Nov2017 32.4.A.1.54
modded kernels are here
https://forum.xda-developers.com/z5...oted-kernel-e6833-e6853-e6883-32-4-1-t3686024
on Unlocked bootloader [ UB ]
simply
1. flash stockrom ftf using Flashtool
2. boot till welcome screen and poweroff
3 connect device in fastboot mode and flash modded kernel given in the post and flash TWRP
4. from Twrp, flash MAGISK (instead of supersu) + SELinux zip (permissive) + safteynet cleaning tools.zip
5. reboot,
6. install Magisk Manager 5.8.1 APK
7. install that app which fails to work,
8. from hide magisk, select that app, this will hide root access,
9. try the APP, it should work!
however , if it still fails to work and twrp is the reason
then
power off device
10 . connect device in fastboot mode and in minimal adb window type " fastboot wipe recovery " and enter, this will wipe the recovery
11. boot up and try the app now!
12 if again it doesnt work! then
13. FLASH FOTAKERNEL only! from ftf, don't flash anything else! skip all others in the flashtool! this will flash the Original FOTA Kernel and that bank app should work!
so i gave you 3 scenarios
please be careful!
Advice needed
Hi guys,
I am still looking for how to root my xperia Z5P e6883, and I have found this thread which seems different (hopefully in a better way) from what I had read before.
My boot loader is unlocked, Developer Options activated, USB Debugging activated and also Unknown Sources on. I have done three attempts to root it so far but all of them failed. The last two have displayed the "installing error 1" almost at the very end of the Magisk (v.17 or v.19) flashing process.
Now, reading the above thread, I noticed that I should flash "SELinux zip" but I am unable to spot that .zip file in order to download it. Is anyone willing to help/advise?
Thank you!