Develop Bugs

another brick (?) story and help wanted

hi there,
i was on HYD52ROM V2 for the Ascend P6.
I decided to do an upgrade to the KitKat Version of HYD52ROM. So i installed the TouchRecoveryInstaller-v1_01.apk and rebooted. I had the newest file of the Rom on my SD-Card. I wiped the phone and the dalvik also.
Then it said, that there is an error while installing the KitKat Rom.
I thought "no problem" - i had the old V2 on my sd card also.
Now only the bootscreen "Huawei Ascend" appears and nothing more. I can switch off the phone while hitting all the buttons but nothing more. Is there any possibility to get it back working?
If so, please a short step by step will do it.
Thanks!

piepsys said:
hi there,
i was on HYD52ROM V2 for the Ascend P6.
I decided to do an upgrade to the KitKat Version of HYD52ROM. So i installed the TouchRecoveryInstaller-v1_01.apk and rebooted. I had the newest file of the Rom on my SD-Card. I wiped the phone and the dalvik also.
Then it said, that there is an error while installing the KitKat Rom.
I thought "no problem" - i had the old V2 on my sd card also.
Now only the bootscreen "Huawei Ascend" appears and nothing more. I can switch off the phone while hitting all the buttons but nothing more. Is there any possibility to get it back working?
If so, please a short step by step will do it.
Thanks!
Click to expand...
Click to collapse
Only soft bricked, install stock recovery.
http://forum.xda-developers.com/showpost.php?p=51066019&postcount=14

ok thank you for your answer...
means i have to put the "UPDATE.APP" in the DLOAD-folder on the sd?
two more questions...
1) is it important which original firmware version?
2) i have downloaded the "Huawei Update Extractor" ... what to do with it? Do you have a link for the stock recovery? I haven´t read s.th. about it :-/
Regards

piepsys said:
ok thank you for your answer...
means i have to put the "UPDATE.APP" in the DLOAD-folder on the sd?
Click to expand...
Click to collapse
Just updated my last post same time when you wrote.. check the link

ok thank you. i will check the link
The problem i have ... how to -> Put your device in fastboot mode ( > adb reboot bootloader )
Never done this BIG SORRY

piepsys said:
ok thank you. i will check the link
The problem i have ... how to -> Put your device in fastboot mode ( > adb reboot bootloader )
Never done this BIG SORRY
Click to expand...
Click to collapse
Download http://forum.xda-developers.com/showthread.php?t=2588979
Press y and then n
Then download http://www.androidfilehost.com/?fid=23252070760973625
and extract it to c:\adb then press sift and right click and go to open commandwindow here
then write: adb reboot bootloader
then: fastboot flash recovery recovery.img
and last: fastboot reboot
Then download firmware (latest international is: https://mega.co.nz/#!N8BAxZYJ!8cOp8imgnLxNMfUjCDoBtzR69tz7nLYccL2-VMG4If8 ).
Extract that and make dload folder to your external sd card. and put update.app in to it.. then press power+volumeup+volume down when phone restarts, and it starts to install stock firmware

worked! thanx a lot for your help!!!

Lollipop update problem (Status7)

Please help me I tried everything...

Where you rooted/is your bootloader unlocked?

FoxyDrew said:
Where you rooted/is your bootloader unlocked?
Click to expand...
Click to collapse
He's rooted. I'm not sure about the bootloader but I am sure that he's modified the system and therefore can't update. Has happened to me before.

monsieur_beau19 said:
He's rooted. I'm not sure about the bootloader but I am sure that he's modified the system and therefore can't update. Has happened to me before.
Click to expand...
Click to collapse
Well we don't know for sure yet

aybergoz said:
Please help me I tried everything...
Click to expand...
Click to collapse
Extract this "NC" file and copy it to your phone's storage.
Now u need to flash a twrp recovery. when you did,Open twrp and go to "Mounts" and activate "System"
Then go to twrp's file manager and move "NC" file to this path: "/system/xbin".
Now flash your stock recovery and try to update again.
It worked for me
(THIS ERROR HAS NOTHING TO DO WITH UNLOCKED BOOTLOADER)

By the way you have to Unroot your device first if it's rooted

Lollipop Update problem Solved
Hello ,I have the problem of updating lollipop over ota update. The problem got solved by the following Step by Step procedure.
1. Unroot the device . Go to the supersu on the App menu and then go to Supersu settings and select unroot.
2.Reboot the device in fastboot mode (Press power + Volume Down together).
3.On hboot menu Select Fastboot. Then Plug your device with Pc .
4.Download the fastboot.rar from Attachments. Extract the Fastboot.rar file on pc. Open the Extracted Folder.
5.On the Folder Press SHIFT+Right button of the mouse. Select Open command window here.
6.Type " fastboot flash recovery recovery.img " (Stock recovery is attached on the fastboot folder)
7.Disconnect the usb from pc. Reboot the device.
8.After the device getting started go to device update and download the update and Install this.
This is the procedure to get Ota Lollipop Update.
If there is a problem then install twrp,root the device and then unroot again and follow this procedure.
Thanks

Arash94 said:
Extract this "NC" file and copy it to your phone's storage.
Now u need to flash a twrp recovery. when you did,Open twrp and go to "Mounts" and activate "System"
Then go to twrp's file manager and move "NC" file to this path: "/system/xbin".
Now flash your stock recovery and try to update again.
It worked for me
(THIS ERROR HAS NOTHING TO DO WITH UNLOCKED BOOTLOADER)
Click to expand...
Click to collapse
in my phone error occured due to build.prop is missing .. plase help :crying:

monsieur_beau19 said:
He's rooted. I'm not sure about the bootloader but I am sure that he's modified the system and therefore can't update. Has happened to me before.
Click to expand...
Click to collapse
Hi there, I'm having the same problem, what should I do to remove the root?
Thanks

Izz0_ said:
Hi there, I'm having the same problem, what should I do to remove the root?
Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/desire-816/help/how-to-install-ota-update-t3097232

HTC 820 Problem

good evening
i have htc 820 with this informations
*** Software status: Modified ***
*** Unlocked ***
A51_UL PVT SHIP S-ON
HBOOT-3.19.0.0000
RADIO-01.01.010_U10305041_08.01.50512
OS-2.10.410.4
eMMC-boot 2048MB 0C
Nov 13 2015,18:02:23.0
----------------------------------------------------------------------
WAS RUNNING ON ANDROID 5.0.1
got message to update to android 6.0.1 size: 613MB
when the installation started and device restarted it went to twrp and gave me message saying : no os installed! are you sure you wish to reboot?
now the mobile is not working and i tried to flash rom twrp and stock recovery
and also tried this guide
http://forum.xda-developers.com/desire-820/help/update-modified-5-0-2-euro-firmware-t3376130
and tried some roms to boot the phone but nothing is working
now the phone is dead and stuck on htc logo
can someone help me to get the phone back to work ?

desdenovax said:
good evening
i have htc 820 with this informations
*** Software status: Modified ***
*** Unlocked ***
A51_UL PVT SHIP S-ON
HBOOT-3.19.0.0000
RADIO-01.01.010_U10305041_08.01.50512
OS-2.10.410.4
eMMC-boot 2048MB 0C
Nov 13 2015,18:02:23.0
----------------------------------------------------------------------
WAS RUNNING ON ANDROID 5.0.1
got message to update to android 6.0.1 size: 613MB
when the installation started and device restarted it went to twrp and gave me message saying : no os installed! are you sure you wish to reboot?
now the mobile is not working and i tried to flash rom twrp and stock recovery
and also tried this guide
http://forum.xda-developers.com/desire-820/help/update-modified-5-0-2-euro-firmware-t3376130
and tried some roms to boot the phone but nothing is working
now the phone is dead and stuck on htc logo
can someone help me to get the phone back to work ?
Click to expand...
Click to collapse
1 Tighten two volume buttons and the power button when you see a black screen and holding down the volume- and power button that would go to bootloader.Telefon must be connected to kompyuteru.Esli got to go to the boot loader, boot into download sistemu.Esli not work then you need to flash the stock rekaveri 2 Install it stock rekaveri 5.0.2 https://yadi.sk/d/Jv1cy3EqrTuba
---------- Post added at 07:25 AM ---------- Previous post was at 07:17 AM ----------
And yet, you can try to do it in TWRP: 1. Go to recovery mode
2. Then go to wipe
3.Then go there and format data "yes" type and press the Enter key
4. After the go ahead to wipe wipe partition, and then ... chache, delvik cache
System, data, internal sd ..then wipes
5.then Lolipop restore your backup twrp
6.after install backup Ur perform factory reset to wipe section.
7.then again go into formate data section to wipe it "yes" type and press the Enter key
8.now preess system reboot

when i flashed the 5.0.2 stock recovery i got a black screen with red triangle and upside down exclamation mark
then nothing happend
and when i try to rename the rom file to 0PFJIMG.zip and put it on sd card and enter fastboot i get message "system halt because of rom file too big"
can anyone tell me the exact steps to do to make my phone work again on any version of android
i try 4.4 and didn't work

desdenovax said:
when i flashed the 5.0.2 stock recovery i got a black screen with red triangle and upside down exclamation mark
then nothing happend
and when i try to rename the rom file to 0PFJIMG.zip and put it on sd card and enter fastboot i get message "system halt because of rom file too big"
can anyone tell me the exact steps to do to make my phone work again on any version of android
i try 4.4 and didn't work
Click to expand...
Click to collapse
Which version of the firmware (4.4.4 or 5.0.2) has been on the phone first?. i got a black screen with red triangle and upside down exclamation mark. Press and hold the power button, the volume + button to press,rekaveri phone will enter the menu mode, to reset the cache partition, to reset the factory

Android 5.0.2

desdenovax said:
Android 5.0.2
Click to expand...
Click to collapse
If you have unlocked bootloader , relock it, рut it on your external sd card not decompress zip archives(0PFJIMG.zip).You did?

vuk1963 said:
If you have unlocked bootloader , relock it, рut it on your external sd card not decompress zip archives(0PFJIMG.zip).You did?
Click to expand...
Click to collapse
how to relock the bootloader
i can't do it on pc because the mobile won't appear
and which file i should use for 0pfjimg.zip ?

desdenovax said:
how to relock the bootloader
i can't do it on pc because the mobile won't appear
and which file i should use for 0pfjimg.zip ?
Click to expand...
Click to collapse
Do you want to upgrade to version 6.0.1, or not?

vuk1963 said:
Do you want to upgrade to version 6.0.1, or not?
Click to expand...
Click to collapse
yes i want to upgrade to 6.0.1

desdenovax said:
yes i want to upgrade to 6.0.1
Click to expand...
Click to collapse
Then do it. A method for producing a flow 5.0.2 5.0.2 with subsequent update to 6 mm 100% process working. install stock rekaveri , If you have unlocked bootloader , relock it, рut it on your external sd card not decompress zip archives(0PFJIMG.zip), boot into bootloader with volume - and power button. it will read the zip, and if it compatibel with your os it will aupgrade and you have to confirm with your buttons.
For Qualcomm Snapdragon MSM8939 -- Snapdragon 615 Qualcomm 8-ядерный 64-бит процессор ядра Cortex A53 4x1.5 ГГц и 4х1 ГГц Adreno 405 HTC Desire 820n 1-sim. for Europe Firmware https://yadi.sk/d/KYcWwUH4raUxm stock rekaveri 5.0.2 https://yadi.sk/d/Jv1cy3EqrTuba For locked bootloader https://yadi.sk/d/C5ZYzOL-k4dco

vuk1963 said:
Then do it. A method for producing a flow 5.0.2 5.0.2 with subsequent update to 6 mm 100% process working. install stock rekaveri , If you have unlocked bootloader , relock it, рut it on your external sd card not decompress zip archives(0PFJIMG.zip), boot into bootloader with volume - and power button. it will read the zip, and if it compatibel with your os it will aupgrade and you have to confirm with your buttons.
For Qualcomm Snapdragon MSM8939 -- Snapdragon 615 Qualcomm 8-ядерный 64-бит процессор ядра Cortex A53 4x1.5 ГГц и 4х1 ГГц Adreno 405 HTC Desire 820n 1-sim. for Europe Firmware https://yadi.sk/d/KYcWwUH4raUxm stock rekaveri 5.0.2 https://yadi.sk/d/Jv1cy3EqrTuba For locked bootloader https://yadi.sk/d/C5ZYzOL-k4dco
Click to expand...
Click to collapse
i try this method and didn't work
i can't relock the bootloader because the phone can't open on pc
and the rom from this post give me error "file is to big - system halt"

desdenovax said:
i try this method and didn't work
i can't relock the bootloader because the phone can't open on pc
and the rom from this post give me error "file is to big - system halt"
Click to expand...
Click to collapse
Download the system settings of the phone, about telelefone, software version, In addition, the build number, 10 times tapnut open developer mode, return to the phone settings, enter developer mode, enable USB debugging,download phone in bootloader and the phone must be connected to a computer

vuk1963 said:
Download the system settings of the phone, about telelefone, software version, In addition, the build number, 10 times tapnut open developer mode, return to the phone settings, enter developer mode, enable USB debugging,download phone in bootloader and the phone must be connected to a computer
Click to expand...
Click to collapse
i keep telling you the phone don't work to do all that
there is nothing on the phone
no operating system
only recovery/twrp and bootloader working

desdenovax said:
i keep telling you the phone don't work to do all that
there is nothing on the phone
no operating system
only recovery/twrp and bootloader working
Click to expand...
Click to collapse
Archive and put on mikroSDcard.Zayti in TWRP rekaveri Wipe-advanced Wipe - note 5 crosses (mikroSDcard not necessary) Swipe to Swipe, then return to gl.menyu, Restore Storage, Internal Storage (finger poke switch to MicroSDcard found on MicroSDcard TWRP and press until backup.Swipe to Restore

vuk1963 said:
Archive and put on mikroSDcard.Zayti in TWRP rekaveri Wipe-advanced Wipe - note 5 crosses (mikroSDcard not necessary) Swipe to Swipe, then return to gl.menyu, Restore Storage, Internal Storage (finger poke switch to MicroSDcard found on MicroSDcard TWRP and press until backup.Swipe to Restore
Click to expand...
Click to collapse
i don't understand what you r saying !!!

htc desire 820 stucks at installing marshmallow update

i got marshmallow update for my desire 820n and after download it when installing a red rectangle with ¡ in mid of it appear and the mobil restart without installing any thing.......i reset it to factory reseting and try again but the same problem again.......i have tried again and again but the same problem happens.........any help.....thankyou

mohamedeliraqi said:
i got marshmallow update for my desire 820n and after download it when installing a red rectangle with ¡ in mid of it appear and the mobil restart without installing any thing.......i reset it to factory reseting and try again but the same problem again.......i have tried again and again but the same problem happens.........any help.....thankyou
Click to expand...
Click to collapse
Now the phone is loaded into the system? and what firmware version 5.0.2?

vuk1963 said:
Now the phone is loaded into the system? and what firmware version 5.0.2?
Click to expand...
Click to collapse
yes the phone is loaded into the system and working properly.....the firmware version is 5.02 ......thank you

mohamedeliraqi said:
yes the phone is loaded into the system and working properly.....the firmware version is 5.02 ......thank you
Click to expand...
Click to collapse
Strictly follow these instructions!
A method for producing a flow 5.0.2 5.0.2 with subsequent update to 6 mm 100% process working. install stock rekaveri , If you have unlocked bootloader , relock it, рut it on your external sd card not decompress zip archives(0PFJIMG.zip), boot into bootloader with volume - and power button. it will read the zip, and if it compatibel with your os it will aupgrade and you have to confirm with your buttons.
For Qualcomm Snapdragon MSM8939 -- Snapdragon 615 Qualcomm 8-ядерный 64-бит процессор ядра Cortex A53 4x1.5 ГГц и 4х1 ГГц Adreno 405 HTC Desire 820n 1-sim. for Europe Firmware https://yadi.sk/d/KYcWwUH4raUxm stock rekaveri 5.0.2 https://yadi.sk/d/Jv1cy3EqrTuba For locked bootloader https://yadi.sk/d/C5ZYzOL-k4dco

thank you for your reply.......but i have to put both files in my external sd or what? Can you give me more instruction to follow .......thank you

No, you only have to put the 0PFJIMG.zip to your external SD. Then it will give you an alert called: "Do you want to start update" or something others, you have to press the volume up button and then it's updating. But make sure you have stock recovery and locked bootloader, otherwise it will not work.
Sent from my SM-G930F using XDA-Developers mobile app

xEmre66 said:
No, you only have to put the 0PFJIMG.zip to your external SD. Then it will give you an alert called: "Do you want to start update" or something others, you have to press the volume up button and then it's updating. But make sure you have stock recovery and locked bootloader, otherwise it will not work.
Sent from my SM-G930F using XDA-Developers mobile app
Click to expand...
Click to collapse
Ok but what i will do with stock recovery or where i put it or how i install it??....i have root my device or what???
thank you

mohamedeliraqi said:
Ok but what i will do with stock recovery or where i put it or how i install it??....i have root my device or what???
thank you
Click to expand...
Click to collapse
рut it on your external sd card not decompress zip archives(0PFJIMG.zip), boot into bootloader with volume - and power button. it will read the zip, and if it compatibel with your os it will aupgrade and you have to confirm with your buttons. 1 file-0PFJIMG.zip

ok i did it and that is what i get:
Main Version is older !
Update Fail
Device halted due to Large Image update fail
Press <POWER> to reboot.
any ideas????.....thank you

mohamedeliraqi said:
ok i did it and that is what i get:
Main Version is older !
Update Fail
Device halted due to Large Image update fail
Press <POWER> to reboot.
any ideas????.....thank you
Click to expand...
Click to collapse
1.install stock rekaveri 2.If you have unlocked bootloader 3.рut it on your external sd card not decompress zip archives(0PFJIMG.zip)0PFJIMG.zip-Only so it is important !!! 4.boot into bootloader with volume - and power button. it will read the zip, and if it compatibel with your os it will aupgrade and you have to confirm with your buttons. PS You sure it's all done? You can do this: Format the SD memory card and place it on an SD memory card 1 file 0PFJIMG.zip

Place the 0PFJIMG.zip into the root of external sd not in a folder.
Sent from my SM-G930F using XDA-Developers mobile app

vuk1963 said:
1.install stock rekaveri 2.If you have unlocked bootloader 3.рut it on your external sd card not decompress zip archives(0PFJIMG.zip)0PFJIMG.zip-Only so it is important !!! 4.boot into bootloader with volume - and power button. it will read the zip, and if it compatibel with your os it will aupgrade and you have to confirm with your buttons. PS You sure it's all done? You can do this: Format the SD memory card and place it on an SD memory card 1 file 0PFJIMG.zip
Click to expand...
Click to collapse
I did exactly what you say but i did not install stock recovery because my decice:
1) NOT rooted
2) locked bootloader
3) S on
HOW can i install stock recovery without rooting???
thank you

xEmre66 said:
Place the 0PFJIMG.zip into the root of external sd not in a folder.
Sent from my SM-G930F using XDA-Developers mobile app
Click to expand...
Click to collapse
I did that but i did not install stock recovery because my device is not rooted......any ideas without rooting

Stock recovery can be installed without root i think. Try it
Sent from my SM-G930F using XDA-Developers mobile app
---------- Post added at 08:05 PM ---------- Previous post was at 07:58 PM ----------
I read your post above. You don't need to install stock recovery because your device has already stock recovery due to locked bootloader and S-ON. Just put the file in root of ext sd and boot to hboot. It will ask to update. So press volume up to update. If it doesn't work after all the posts in xda, then you can contact HTC to fix that problem. Maybe they can find a fix for it or it is an known bug.
Regards,
xEmre66
Sent from my SM-G930F using XDA-Developers mobile app

[HELP] Can't flash Stock 7.0Nougat via Stock Recovery...

I got a ZF3 Deluxe from Italy, is TIM branded, and stuck on MM 6.0, no updated released for this brand, so a friend of mine told me there is of course android 7 for ZF3Deluxe, so i wanted to manually upgrade system to 7.0 Nougat, i downloaded the Stock ROM from asus (2.15ghz cpu, i've checked of course) but when i try to flash it from the Stock Recovery i get this error (see the attachment) i also attach the software informations, (looking at the error i receive it may see the archive is corrupted, but i've tried to download it from Asus many and many times)

You have a carrier rom on your phone and the international version fails the upgrade check.
If you could get your bootloader unlocked that would be a way around it but you need to upgrade to a certain rom version to do that and the carrier hasn't supplied that rom...
You're essentially screwed until the carrier either releases the bootloader unlockable rom or upgrades the rom to nougat...

LeGrim said:
I got a ZF3 Deluxe from Italy, is TIM branded, and stuck on MM 6.0, no updated released for this brand, so a friend of mine told me there is of course android 7 for ZF3Deluxe, so i wanted to manually upgrade system to 7.0 Nougat, i downloaded the Stock ROM from asus (2.15ghz cpu, i've checked of course) but when i try to flash it from the Stock Recovery i get this error (see the attachment) i also attach the software informations, (looking at the error i receive it may see the archive is corrupted, but i've tried to download it from Asus many and many times)
Click to expand...
Click to collapse
You should try to flash stock recovery of WW in fastboot.
And then flash 6.0 WW rom by WW recovery.
Even though ,I didn't sure that if it will work(because I don't have Z016S),but you can try it.

samson1357924 said:
You should try to flash stock recovery of WW in fast boot.
And then flash 6.0 WW rom by WW recovery.
Even though ,I didn't sure that if it will work(because I don't have Z016S),but you can try it.
Click to expand...
Click to collapse
Ok thanks, i can give a try, but where i can download the WW stock recovery? There is no recovery.img inside the WW_user.zip ROM

LeGrim said:
Ok thanks, i can give a try, but where i can download the WW stock recovery? There is no recovery.img inside the WW_user.zip ROM
Click to expand...
Click to collapse
Here it comes~
ZenFone 3 Deluxe ZS570KL_WW stock recovery

Ok guys, i think i've found a way to debrand my Zenfon 3 Deluxe, im testint the procedure right now, i will post the whole procedure if i succeed

Install : ADB & Minimal Fastboot.
Install : pyton 3.6 https://www.python.org/downloads/
Download the latest WW-4.12.40.1698 (For 2.15GHz CPU or 2.40GHz CPU) from Asus WebSite.
Download "Dat to img by stupdroid.com" (search it with google).
Extract Dat to img by stupdroid.com in a Folder.
Open the Firmware ZIP and copy system.new.dat, system.transfer.list e file_contexts in the Dat2IMG's folder.
Execute system.new.dat 2 flashable img converter.exe and just press ENTER and wait till the end of procedure, you will receive 2 files : system.raw.img e system.new.img.
Copy system.new.img in your Fastboot's folder.
Put the Phone into Fastboot mode.
Open fastboot and put this command: " fastboot flash system system_new.img "
Wait the end of flash procedure and type : Fastboot Reboot.
Enter recovery wipe data and cache.
Done.

LeGrim said:
Install : ADB & Minimal Fastboot.
Install : pyton 3.6 https://www.python.org/downloads/
Download the latest WW-4.12.40.1698 (For 2.15GHz CPU or 2.40GHz CPU) from Asus WebSite.
Download "Dat to img by stupdroid.com" (search it with google).
Extract Dat to img by stupdroid.com in a Folder.
Open the Firmware ZIP and copy system.new.dat, system.transfer.list e file_contexts in the Dat2IMG's folder.
Execute system.new.dat 2 flashable img converter.exe and just press ENTER and wait till the end of procedure, you will receive 2 files : system.raw.img e system.new.img.
Copy system.new.img in your Fastboot's folder.
Put the Phone into Fastboot mode.
Open fastboot and put this command: " fastboot flash system system_new.img "
Wait the end of flash procedure and type : Fastboot Reboot.
Enter recovery wipe data and cache.
Done.
Click to expand...
Click to collapse
I forgot to say, after this procedure, just flash the stock WW recovery via Fastboot, then download from asus the lastest 7.0 firmware SKU WW, all perfect. tested by me.

Ok I already have system.new.img, I copied it to the root folder of the SD. Device restart in Fastboot mode (power + vol.up key). Exit screen with message Fastboot mode and does nothing.
Install in the computer the pyton 3.6, I suppose that it serves for the process of generating system.new.img.
I do not know how to do the first step "Install: ADB & Minimal Fastboot.".
Thank you and forgive my translator

If i want to unlock the bootloader for root and unbrand this phone what i have to do? I need unbranded nougat with root but the phone is TIM branded

Ryder. said:
If i want to unlock the bootloader for root and unbrand this phone what i have to do? I need unbranded nougat with root but the phone is TIM branded
Click to expand...
Click to collapse
What version is your phone right now??
Now only have official unluck
For 2.15GHz:8996(None-PRO) UnlockTool
For 2.4GHz:8996P(PRO) UnlockTool
If you are WW version right now,try these tools.

samson1357924 said:
What version is your phone right now??
Now only have official unluck
For 2.15GHz:8996(None-PRO) UnlockTool
For 2.4GHz:8996P(PRO) UnlockTool
If you are WW version right now,try these tools.
Click to expand...
Click to collapse
It's not WW. I'ts from italy and it's tim branded

Ryder. said:
If i want to unlock the bootloader for root and unbrand this phone what i have to do? I need unbranded nougat with root but the phone is TIM branded
Click to expand...
Click to collapse
Try this
or try flash ZenFone 3 Deluxe ZS570KL_WW stock recovery of 4.12.40.1698 and flash UL-Z016-WW-4.12.40.1698-user.zip in recovery (by micro sd or adb sideload)not sure if it work(need verification,I wish you to try first).

Please help me, my model is the Z016S
I can convert UL-Z016-WW-4.12.40.1698-user.zip img and flash with fastboot.
Reboot and it works, but I do not know how to get into recovery.
I have also installed the Z016-WW-4.11.40.1085_recovery.img. The TIM DISAPPEARED
Then I copied the UL-Z016-WW-5.14.44.1898-user.zip into the internal memory and it does not install well.
I have proven the same with UL-Z016-WW-5.14.44.1898-user.zip and it does not work me it stays in a non-comands and will not boot.
greetings and thanks
P.S. At least you do not see the TIM anywhere.

barbapapa said:
Please help me, my model is the Z016S
I can convert UL-Z016-WW-4.12.40.1698-user.zip img and flash with fastboot.
Reboot and it works, but I do not know how to get into recovery.
I have also installed the Z016-WW-4.11.40.1085_recovery.img. The TIM DISAPPEARED
Then I copied the UL-Z016-WW-5.14.44.1898-user.zip into the internal memory and it does not install well.
I have proven the same with UL-Z016-WW-5.14.44.1898-user.zip and it does not work me it stays in a non-comands and will not boot.
greetings and thanks
P.S. At least you do not see the TIM anywhere.
Click to expand...
Click to collapse
So,what is your system version right now?4.12.40.1698?
Why not flash the recovery of 4.12.40.1698?

samson1357924 said:
So,what is your system version right now?4.12.40.1698?
Why not flash the recovery of 4.12.40.1698?
Click to expand...
Click to collapse
This is my situation

samson1357924 said:
So,what is your system version right now?4.12.40.1698?
Why not flash the recovery of 4.12.40.1698?
Click to expand...
Click to collapse
I have done this and it installs,
fastboot flash recovery Z016-WW-4.12.40.1698_recovery.img
reboot, boot system, detect update file is installed, reboot and then gives error (3) unknown.

barbapapa said:
I have done this and it installs,
fastboot flash recovery Z016-WW-4.12.40.1698_recovery.img
reboot, boot system, detect update file is installed, reboot and then gives error (3) unknown.
Click to expand...
Click to collapse
Tow solution you can try
1.install the rom of 4.12.40.1698 again(some of tile,such as xbl,devcfg,devcfgbak..... may be still TIM versio.install it in recovery may turn it into WW version)
2.If fail, try flash these files in fastboot.(I will upload these files for you to flash,also you can draw by yourself)

Ok already worked, the solution is to unlock as you put in # 11.
Thank you

barbapapa said:
Ok already worked, the solution is to unlock as you put in # 11.
Thank you
Click to expand...
Click to collapse
Good!
Can you share what step did you do? Which might help another TIM user.