Resurrection Remix 5.7.3Huawei Honor 3C [H30-U10]Intro:
Resurrection Remix MM is an aftermarket ROM based on CyanogenMod 13/Marshmallow with lots of customization and at the same time packing a punch of performance.
This ROM was ported and tested by me for a few days before I decided to upload it for other users. Please post your opinions and bugs you might encounter in this thread, I will try my best to sort them out. Thank you.
Resurrection Remix Community Page:
https://plus.google.com/communities/109352646351468373340
FAQ: https://plus.google.com/101154841950858558748/posts/5qFH3vxEKfL
ROM Download Link:
https://drive.google.com/file/d/0B32KJ-m23FxDaU5rV1REUk9Za3c/view?usp=sharing
Google Apps:
http://opengapps.org/ (pico package recommended, but if you use Google Now then use the micro package)
Installation Instructions:
> Before any modifications please take a nandroid backup of your phone so you can revert it in case anything goes wrong
> Go to recovery and wipe all partitions except SD card
> Flash the Rom zip
> Flash GApps right after flashing the Rom zip
> Now to flash boot.img you can either
1 - Power off the phone. On a PC, extract boot.img from Rom zip and flash it using SP Flash Tool.
Or
2 - Copy the boot.img to phone and install it using TWRP_2.8.6.0 by codelover. To do so reboot to recovery, Tap Install, on bottom right Tap Install Image and browse to location where you copied boot.img earlier. Swipe to install and when it asks for installing Boot or Recovery, select Boot and proceed.
> In case of no signals issue, flash an appropriate modemfix from codelover's thread here
Kernel: Stock Honor 3C Kernel.
init.d Tweaks:
Download the files from here and copy all of them to system > etc > init.d before or after installing the Rom. Open the Kernel Auditor app and under init.d tab, enable Emulate. Done!
All tweaks previously included by @Pavel Sajjad Khan in his ports.
Bugs:
Existing bugs in Android 6 Roms for our device exists in this build as well(they won't go away easily ). If something went unnoticed by me, please comment on it here.
> VPN bug(Although you can use a third party app such as shadowsocks)
> Network drops when incoming call answered with earphones plugged in
> Switching between 2G/3G mobile data doesn't work
Patches:
Battery Capacity Patch: Download the patch zip from here and flash from recovery. Fixes the inaccurate battery capacity value in framework-res. Courtesy of @stanleygamer.
Maximum Volume: Download the volume patch file from here. Copy it to data > nvram > APCFG > APRDCL. Set file permissions to rwrw-- and reboot phone.
GPS Fix:
If GPS doesn't work, download the GPS test app from here. Go to Settings > Location > Turn ON Location > Set Mode to Device Only.
Now open GPS Test app and let it lock GPS, will take less than a minute if you're outside.
After first lock on GPS test app, you can now use GPS normally. You only have to do this once after installing the Rom.
Note: GPS reviews needed so please check if GPS works for you and comment here preferably with your location. Much appreciated!
Credits:
Special thanks to @stanleygamer for helping me figure out solutions to bugs.
Ferhung - The man behind CM13 for MT6582
Fire855 - Another legend
Hyperion70
www.mtkroms.com
Ajit Guraya - Compiled Resurrection Remix v5.7.3 for MT6582 from source and fixed camera !
Minh Quoc and Karim Gahgah - For video recording fix
Aniruddha Adhikary - For his amazing USSD Fix
Sergey Kochetkoff - For his amazing GPS fix
Team Roger That - Ajit Guraya, Diparth Shah, Pawan Diyal, Ashutosh Dubey, Waseem Maya, Ankit Bhatangar, Rohan Taneja, Vipul Jha, Pranav Reddy
Resurrection Remix Devs/Team - www.resurrectionremix.com
Required blobs (Really huge thanks) :
nofearnohappy, Varun Chitre, Ariafan, Vald.masti, Fire855, Alex
Battery tweaks or something?
Enviado desde mi H30-U10 mediante Tapatalk
lHumanizado said:
Battery tweaks or something?
Enviado desde mi H30-U10 mediante Tapatalk
Click to expand...
Click to collapse
I haven't included any, but if you want I can add the init.d tweaks previously present in the Rom by Pavel.
Emiya_Kiritsugu said:
I haven't included any, but if you want I can add the init.d tweaks previously present in the Rom by Pavel.
Click to expand...
Click to collapse
Thanks, any tweak that you can include would be great, thanks for keeping this device alive
Enviado desde mi H30-U10 mediante Tapatalk
http://www.mtkroms.com/2016/06/bugless-temasek-for-mt6582-lollipop-kernel.html
hey is this rom for our honor 3c??its bugless and kernal 3.10
hassanjavaid8181 said:
http://www.mtkroms.com/2016/06/bugless-temasek-for-mt6582-lollipop-kernel.html
hey is this rom for our honor 3c??its bugless and kernal 3.10
Click to expand...
Click to collapse
Unfortunately our device does not have lolipop kernel so far so this wouldn't work.
Is your build stable for daily driver...I am on stock kitkat..its battary dran really fast..and heat issue..is that issue solved in this rom??and is gps working??and one more question is that your build or pavel build??
hassanjavaid8181 said:
http://www.mtkroms.com/2016/06/bugless-temasek-for-mt6582-lollipop-kernel.html
hey is this rom for our honor 3c??its bugless and kernal 3.10
Click to expand...
Click to collapse
Unfortunately our device does not have lolipop kernel so this wouldn't work
Already answered..
If I want to install that rom can you send me required files..how can I prepare my device for that rom..I am on stock with locked bootloader..
hassanjavaid8181 said:
Is your build stable for daily driver...I am on stock kitkat..its battary dran really fast..and heat issue..is that issue solved in this rom??and is gps working??and one more question is that your build or pavel build??
Click to expand...
Click to collapse
Yes you can use it as daily driver since everything you would require on daily basis works in this Rom. Which stock firmware are you on? I use B268 and so far for me no other stock or custom rom has had a better battery backup than this.
I haven't faced any heating issues on this build, battery backup is fine too. GPS works. And lastly yes, this is my port.
I have a international version ...and I am on b310 pakistan version..will I lost simm if I use this rom??I am really new with those things..so can you guide me with that..thanks in advance
hassanjavaid8181 said:
If I want to install that rom can you send me required files..how can I prepare my device for that rom..I am on stock with locked bootloader..
Click to expand...
Click to collapse
The rom page on mtkroms has the list of required files from stock rom that you would need to port that Rom for your device. It's on the bottom of the page. Other than that, you might need to replace some files if you encounter bugs after installing the Rom.
Try to port a Rom you like, if you need help send me a PM
hassanjavaid8181 said:
I have a international version ...and I am on b310 pakistan version..will I lost simm if I use this rom??I am really new with those things..so can you guide me with that..thanks in advance
Click to expand...
Click to collapse
If you use this build, no you wouldn't lose sim/imei since I have the same phone(same country too) variant and I used to modem files for it
You misunderstood me bro..I dont want to port room ihave honor 3c internation version I have to unlock bootloader and inatal twrp..how can find twrp recovery for that device
---------- Post added at 02:06 PM ---------- Previous post was at 02:04 PM ----------
Thanks bro...and one more question if I want to come back on stock is that esay to come back on stock??
hassanjavaid8181 said:
You misunderstood me bro..I dont want to port room ihave honor 3c internation version I have to unlock bootloader and inatal twrp..how can find twrp recovery for that device
---------- Post added at 02:06 PM ---------- Previous post was at 02:04 PM ----------
Thanks bro...and one more question if I want to come back on stock is that esay to come back on stock??
Click to expand...
Click to collapse
Uh sorry about that. To unlock bootloader, follow this guide by codelover http://forum.xda-developers.com/showpost.php?p=54603756&postcount=4
For installing twrp http://forum.xda-developers.com/showpost.php?p=54603787&postcount=6
The appropriate version of twrp for our variant is H30-U10_TWRP_2.8.6.0.zip
Coming back to stock Rom is very easy using either update.app or sp flash tools http://forum.xda-developers.com/showpost.php?p=54603756&postcount=4
Please take phone backup with SP flash tools before any modifications http://forum.xda-developers.com/showpost.php?p=54603738&postcount=3
Thanks alot bro..just downloading your build..but I dont understand make a backup with sp flash tool..can I make a backup with twrp..wil that work??
hassanjavaid8181 said:
Thanks alot bro..just downloading your build..but I dont understand make a backup with sp flash tool..can I make a backup with twrp..wil that work??
Click to expand...
Click to collapse
Codelover has very easy to follow instructions on taking backup using spft but a twrp backup is fine too.
Thanks bro...whats gapps should I download..stock..full.micro or nano??
hassanjavaid8181 said:
Thanks bro...whats gapps should I download..stock..full.micro or nano??
Click to expand...
Click to collapse
Micro GApps are recommended if you use Google Now, else install nano.
Thanks..can u please tell me step-by-step guide how to install boot.img with spftool?
Related
Intro:
CyanogenMod 13 for Honor 3C is an aftermarket ROM based on Android Marshmallow. The ROM is super stable and super smooth. It can be used as a daily driver without any issues. I believe we all know about CM 13 for Honor 3C and I don't need to tell you about it
GPS, USSD, Calls, Camera, Video Recording, SMS, Bluetooth and other needed features are working in this ROM and it can be used as a daily driver.
ROM Download Link:
http://www.mediafire.com/file/hy8uevzlukl92y2/CM13-R74-Syed_Hassan.zip
Google Apps:
G apps are Included No Need To Flash G apps Separately:
Installation Instructions:
> Before any modifications please take a nandroid backup of your phone so you can revert it in case anything goes wrong
> Go to recovery and wipe all partitions except SD card
> Flash the Rom zip
#No need to flash boot.img separately
Cm 13-r74 Addtional Settings
Features:
Edge Screen
Flash Notification
Xinternal(To make sd default)
Ad Away
https://mega.nz/#!QNIQzTRQ!8dOSg3Q_LCRrWuBezKKWapZlpQxCoxk3cFiIaArusSw
Download zip from above link
Go to Recovery
Install That zip/reboot/Done
In case of no signals issue, flash an appropriate modemfix from codelover's thread http://forum.xda-developers.com/android/development/guide-huawei-honor-3c-h30-u10-t2837773 or copy "catcher_filter_1_wg_n.bin" and "modem_1_wg_n.img" file from your stock rom's system/etc/firmware folder and paste and replace these two files in Cm13 system/etc/firmware folder] (if you change these files in the cm13 rom zip file then you don't need to change permissions. but if you are doing it with root explorer then don't forget to change their permission to rw-r-r)
Features:
#Tweaked Performance
#Better Ram Management
#Improved Sound(sound quality is very good and loud)
#Xperia Music App added with great sound
#Over Heating Problem is solved
#Xposed is Already Installed(enjoy)
Dolby Atmos Added
Whats New:
WiFi Stability - Thanks Fire855
Faster GPS Lock
All new stuff from CM
Stability improvements
#Latest Dolby Atmos Installed
#No Heating Issue
#No wifi Problem(Wifi Auto connecting)
#gps works like a charm
#Xposed Active(No need to install Xposed separately)
#Up streamed To R74
#latest Security Patch Installed
#No need to flash boot.img separately
What's Working:
GPS
Camera
Audio in calls
Bluetooth
USSD
Audio
Mic
RIL
SMS (Receive and Send both working)
WiFi
Data
RIL is now more stable
Dual SIM
Gapps
Hotspot
Screen Recording
Both storages (SD and Internal) mounting in both Phone and PC
Gapps
720P working in youtube
BUGS:
2g/3g switch(to cnage 2g/3g switch got to settings/system profiles and change)
Vpn(use Phisphon pro browser only mod or use shadowshock)
Credits :
hassanjavaid8181(me)
Hamada Jimmy
Draculla444
Farhung
Fire855
Kernel Source: Stock Honor 3c
PLZ LIKE MY POST AND LEAVE A FEEDBACK AFTER USING THIS ROM:
XDA:DevDB Information
CyanogenMod 13 For HonoR 3C, ROM for the Honor 3C
Contributors
hassanjavaid8181, hassanjavaid8181
Source Code: http://www.mtkroms.com
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod 13 SEp 2016
Version Information
Status: Stable
Current Stable Version: V1
Stable Release Date: 2016-09-19
Created 2016-09-19
Last Updated 2016-11-22
ScreenSHots:
When will the 2g/3g bug be fixed? I love all these ROMs, but my network carried does not provide 3g, and I cannot switch to 2g from these ROMs, because of which I get no service.
Is there any workaround to force the phone to use 2G? Like some patch or by modifying some system files like build.prop
GPS works while moving around in google maps?
So is this the most stable one currently? or the one by Pavel Sajjad Khan
TechSTER™ said:
So is this the most stable one currently? or the one by Pavel Sajjad Khan
Click to expand...
Click to collapse
Answer to your question is yes.. About Pavel build you can test this build and tell what's the difference and which one is better
What's the difference with temasek 's build?
gufone said:
What's the difference with temasek 's build?
Click to expand...
Click to collapse
Difference is your choice..
If you like pure cyanogen you can use this ROM
If you like cm base ROM with other features you can use temasek
shayanjalil said:
When will the 2g/3g bug be fixed? I love all these ROMs, but my network carried does not provide 3g, and I cannot switch to 2g from these ROMs, because of which I get no service.
Is there any workaround to force the phone to use 2G? Like some patch or by modifying some system files like build.prop
Click to expand...
Click to collapse
right now there is no solution for that,,
if your cellular company is providing 2g than it automatically gives you 2g,,i am using 2 sims sim1 is providing 3g i am using 3g from that and second sim company proving 2g so automatically i am using 2g
you can use 2g bro,,
dinokhan said:
GPS works while moving around in google maps?
Click to expand...
Click to collapse
i just update screen shots in op you can see in screenshots,,
Installed the rom runs smoothly and so far gud battery backup only issue WiFi not auto connect
Sent from my SM-J200F using Tapatalk
popz1 said:
Installed the rom runs smoothly and so far gud battery backup only issue WiFi not auto connect
Click to expand...
Click to collapse
Copy WiFi folder from your stock system/etc and paste in this rom's system etc...do it solid explorer you do not have to change permission just copy and paste..
This rom isn't rooted right? How i can root i t fast and easy?
miniol94 said:
This rom isn't rooted right? How i can root i t fast and easy?
Click to expand...
Click to collapse
Its rooted..go to settings tab build number couple of times it will activate developer options go to developer options click on root access select apps and adb...done
hassanjavaid8181 said:
Its rooted..go to settings tab build number couple of times it will activate developer options go to developer options click on root access select apps and adb...done
Click to expand...
Click to collapse
Done it and now its rooted thank you very much.
miniol94 said:
Done it and now its rooted thank you very much.
Click to expand...
Click to collapse
You are welcome..
What to do if I lose my IMEI after installing this ROM? Would pasting the original 'MP0B_001' file in NVRAM work? Or can I restore my IMEIs using MTK Droid Tools? Or do I need to go back to stock ROM to get my IMEIs back?
shayanjalil said:
What to do if I lose my IMEI after installing this ROM? Would pasting the original 'MP0B_001' file in NVRAM work? Or can I restore my IMEIs using MTK Droid Tools? Or do I need to go back to stock ROM to get my IMEIs back?
Click to expand...
Click to collapse
You dont need to do any of that..read installation instruction carefully op...you will not have any problem
hassanjavaid8181 said:
You dont need to do any of that..read installation instruction carefully op...you will not have any problem
Click to expand...
Click to collapse
I actually I do lose my IMEIs for some reason. I did everything right. Not only with this ROM but the RR ROM and the other Cyanogen MOD by Pavel Sajjad Khan. I tried numerous times. End up with no signals and Invalid IMEIs. So I was wondering if I could restore the IMEIs using the two methods I mentioned in my previous comments.
http://forum.xda-developers.com/android/development/huawei-honor-3c-imei-fix-t3288020
Currently I use this guide to restore the IMEIs. But it is for the Stock ROM. I was wondering wether this guide would work for your ROM or not.
Just try to copy two files catcher_filter_1_wg_n.bin and modem_1_wg_n.img from stock system/etc/firmware and paste in this rom system/etc/firmware do it with solid explorer and you will not have to change permissions
Intro:
Started by a group of Chinese developers during the Jellybean days, Mokee ROM was China's first steps into the open source world of Android.
Believed to be less in terms of features and customisations by many Android users, the Mokee Open Source developers have worked off their ass in getting to you some cool kickass features, most of which are exclusive to Mokee only.
ROM Download Link:
Mokee ROm
Google Apps:
http://opengapps.org/
Installation Instructions:
> Before any modifications please take a nandroid backup of your phone so you can revert it in case anything goes wrong
> Go to recovery and wipe all partitions except SD card
> Flash the Rom zip
#No need to flash boot.img separately
In case of no signals issue, flash an appropriate modemfix from codelover's thread http://forum.xda-developers.com/android/development/guide-huawei-honor-3c-h30-u10-t2837773 or copy "catcher_filter_1_wg_n.bin" and "modem_1_wg_n.img" file from your stock rom's system/etc/firmware folder and paste and replace these two files in Cm13 system/etc/firmware folder] (if you change these files in the cm13 rom zip file then you don't need to change permissions. but if you are doing it with root explorer then don't forget to change their permission to rw-r-r)
ChangeLog:
Improved Performance
More Stability
Improved Battery Backup
Some More features....
Features:
Code:
Aegis - The Power Saving Tool
YuBrowser
Fm Radio
Latest Dolby Atmos and Viper4Androi
Xposed Active
Awesome battery Backup
Enhanced Performance
Better Ram Management
3G tweaks Added
Fully Stable
More Features You can Test by yourself
New Sound Added
Almost Bugless
What's Working:
GPS
Camera
Audio in calls
Bluetooth
USSD
Audio
Mic
RIL
SMS (Receive and Send both working)
WiFi
Data
RIL is now more stable
Dual SIM
Gapps
Hotspot
Screen Recording
Both storages (SD and Internal) mounting in both Phone and PC
Gapps
720P working in youtube
Vpn Working(you can use it with third party app SHADOWSHOCK Already added to Rom)
2g-3g Switch Workaround
Got to settings
scrool down to system profiles and change network prefered type to 2g
done
Click to expand...
Click to collapse
Code:
[SIZE="7"]Credits :[/SIZE]
ALLAH Almighty
Muhammad [Peace be Upon Him]
Mokee OS Team
Cyanogenmod team
Maximum Team
AMD indofamily
Android Matrix Development
Matrix OS Team
Edi Purwanto
Fathurrahman Ara
Dhea Mohamad Apriandi
Anuta Lores [Anubaid Noora]
Mediapad Koe
Prasetyo Adi
Mz Zetya
Roman Chie Fpah Refal
SLam'et RiyAntoo
Ichirou Izanagii
Hikari no Tenshin
Nana Iyke Quame
Hameed Musharaf
Aditya Kumar
Obaid Muneer
hassanjavaid8181(ME)
draculla444
Manjunath Yushu
Mokee OS Team
Cyanogenmod team
Kernel Source: Stock Honor 3c
PLZ Hit thanks to support AND LEAVE A FEEDBACK AFTER USING THIS ROM:
XDA:DevDB Information
MOKEE-MM-r78 For HONOR3C(H30-U10), ROM for the Honor 3C
Contributors
hassanjavaid8181, hassanjavaid8181
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Created 2016-11-07
Last Updated 2017-10-12
can I use 3g only mod on this ROM?
Sent from my H30-U10 using Tapatalk
To Get Edge Screen in Mokee Rom:
https://mega.nz/#!FB5lRa6C!zmwHUSogh8SwLm6WePPTGOQvsf0_fEaLWCg-TwzbMX4
Download that zip put it in sdcard
Go to recovery and flash that zip,reboot,Done
Mokee r74 nov build coming soon
Unfortunately Skype stops working on this rom. Skype has stopped
Mokee R74 Links Updated....
Hassan
hassanjavaid8181 said:
Mokee R74 Links Updated....
Click to expand...
Click to collapse
ROM is good and all features are working fine till now, i have flashed it today morning.
dineshnfun said:
ROM is good and all features are working fine till now, i have flashed it today morning.
Click to expand...
Click to collapse
Now started getting problem with data connection, once lost signal in both SIM, phone restart solved the issue, but data connection is getting disconnected, need to ON/OFF airplane mode. Till yesterday no issues but then issues started.
dineshnfun said:
Now started getting problem with data connection, once lost signal in both SIM, phone restart solved the issue, but data connection is getting disconnected, need to ON/OFF airplane mode. Till yesterday no issues but then issues started.
Click to expand...
Click to collapse
Resetted APN already?
Sent from my honor 5X using XDA Labs
Mokee Update jan 2017-r78
Links Updated
hassanjavaid8181 said:
Mokee Update jan 2017-r78
Links Updated
Click to expand...
Click to collapse
Major update or minor? Anyway, any changelog for this R78 update?
thanks bro, almost you keep alive our device
best regards
draculla444 said:
thanks bro, almost you keep alive our device
best regards
Click to expand...
Click to collapse
You are welcom bro..
broken link
can u repost an updated link to download
arinskin said:
can u repost an updated link to download
Click to expand...
Click to collapse
link updated,.sorry for delay.
new ROm
https://forum.xda-developers.com/honor-3c/development/zephyre-os-h30-u10-syed-hassan-t3688692
no update?
vikings_ said:
no update?
Click to expand...
Click to collapse
Mokee will come back with nouget.
hassanjavaid8181 said:
Mokee will come back with nouget.
Click to expand...
Click to collapse
that is so good when will it come.
vikings_ said:
that is so good when will it come.
Click to expand...
Click to collapse
Never ask ETA...will update soon
First: I am not a developer but I like to cook so I thought to share with you the modified version by me for Le 1 Pro/Le Max CN cyanogenmod14 7.1 ROM find on LeEco.Re by RoyalCasin (THANK YOU FOR SHARING!)
The ROM is tested on CN version but maybe it works also on US version because it not contain any modem/radio or other additional parts for other partition then system and boot. TRY IT ON YOUR OWN RISK!...but share with us your experience to get thinks better.
It has some htc flavor: contains Blenkfeed ant trebouchet.
CREDITS:
1. Pan Youjie (screen name Flour Mo) - for developing and sharing the base CM14.1 ROM for LeTV 800+ - BIG THANKS!
2. RoyalCasino - to share the base ROM on LeEco.re,
3. CM 14.1 community (now LineageOS community), especially Oneplus2 CM14.1/LineageOS from where I get some inspirations and files,
4. All XDA community who makes this sharing be possible and enjoy a lot of peoples with community work.
THANK YOU ALL!
Install in TWRP
1. Delete cashe, system, dalvick, data
2. Instal ROM
3. delete cashe and dalvick
4. let device to boot up...first boot can take up to 5-6 min!.
5. Enjoy!
Bugs:
1. Bluetooth not work - solved in ian.03.2017 update - link below
2. Camera sometimes work sometimes not. BUT OPEN CAMERA WORK!!!!
3. Some large vidget (like clock-wether widget from htc - can be selected just if you are in smalest descktop size.
After you positioned you can come back to default descktop size - but not greater.
4. And a few more maybe....
DOWNOAD:
http://www.mediafire.com/file/jsc5q4w6pe4j5om/CM14_NOUGAT711_ABM30_31dec2016-OPONEW-10.zip
UPDATE on 2017ian03: Bluetooth WORK!
http://www.mediafire.com/file/45w0xqpuljljy8t/CM14_NOUGAT711_ABM30_03.ian.2016-BT.zip
UPDATE on 2017ian06:
- no htc stuff
- Cianogenmod SNAP camera changed with google camera (open camera remain)
- improved GPS
http://www.mediafire.com/file/a1m3jagwj7vn11k/X800_CM141_ABM30_6ian2017-nohtc.zip
UPDATE on 2017ian12:
- updated to LineageOS - ported from Oneplus 2-vers. from 11ian2017
- added asserts for X900 - I hope it boot up also on Max1! - need to be cheked
- added fingerprint for X900 - need to be cheked if it works
- snap camera still in for testing purposes.
[URL=http://www.mediafire.com/view/tgz2r7xi1473g1m/Fingerprint.jpg]
[/URL]
link below
http://www.mediafire.com/file/t2pzgxzz2gnoqte/X800_LinOS711_12ian17-07.zip
INSTALLING NOTE!
Skip the wifi connection and phone connection to avoid introducing account during setup. it can stuck on setup!
In case go back and forget any wifi connected...
16IAN2017 - PATCH for data signal not comming back after closing WIFI:
http://www.mediafire.com/file/9artd21a5avpble/Le_1_Pro_WCNSS_cfg.zip
INSTALLING: Go in TWRP, wipe cache and Dalvik/ART, install Le 1 Pro WCNSS_cfg.zip, wipe again cache and Dalvik/art > REBOOT.
I will include the patch in next update.
UPDATE on 2017ian18
Details in post 94/pg 10
link:
Mega.nz link https://mega.nz/#!RgUiCKLD!Yb5ISccbs4a0D66rC3wOyGSa6rMld5zgsMpEdPj1Mkk
Mediafire link: http://www.mediafire.com/file/cq0v5a4gff4c8vl/X800_Lineage_mod_18ian17-008.zip
Update on 2017feb04:
Mega: https://mega.nz/#!Yg1h0AZS!CaIKey9-TPS1FbnqsXZpmxqfSXSyhVY8dtzMDmRKr6g
Mediafire: http://www.mediafire.com/file/wa5zdimckm5kg1o/X800_LOS141_04-feb17-04.zip
- Live display works, all options, including color calibration
- AudioFX changed with Dolby
- LineageOS updated from ported OnePLUS2
- some improvement on phone connectivity
Still not working: wifi tethering and screen cast and IR Blaster
NEW Update on 2017aug14:
!!!!!!-New build ported from Oneplus 2: Resurection Remix 5.8.4.[7.1.2] by nicesoni_ash - THANK YOU nicesoni_ash!-!!!!!!
- It has no GAPPS in, so if you need install OPEN GAPPS NANO, last version, right after ROM FLASH!
- ROM is not rooted! You can install Magisk 13.3 if you think.
http://www.mediafire.com/file/ftkgonoyfoi3fg5/X800_RR584_CN_14aug17_ABM30-09W.zip
--- bugs ---
1 - Tethering not working (without a new kernel it won't I think)
2 - IR blaster is starting after 3 atempts but is not working.
3 - for flash to synchronize: in open camera settings enable the USE CAMERA 2 API and in Photo settings enable USE ALTERNATIVE FLASH METHOD.
NEW Update on 2017sep09:
1- Kernel is compiled from Pan Youjie (Flour_Mo - THANK YOU AGAIN!) source code, based on original 26s kernel config with some improvements, rpfilter activated for tethering to work.
2- WIFI MODULE WAS RECOMPILED FROM SOURCE
3- Rom based on RR584 ported from OnePlus 2 by nicesoni_ash.
4-tethering is working!
CN X800 Android 7.1.2 VARIANT ONLY!
http://www.mediafire.com/file/5t3i3n33e52mo51/X800_RR584_wlan_ABM30_9-sep17-04.zip
US Android 7.1.2 VARIANT ONLY (TESTING on your risck!)
http://www.mediafire.com/file/g5jrdvgcs377ew0/X800_RR584_US_wlan_ABM30_9sep17-01.zip
2and try:
http://www.mediafire.com/file/6btfaw93he4a2ia/X800_RR584_US_wlan_ABM30_9sep17-02mod.zip
Bugs: Ir Blaster not working (the files are there but is not working). Here are more info ,maybe we will find a solution together: https://forum.xda-developers.com/le-pro3/development/mod-make-infrared-blaster-3rd-party-t3511572
NEWS on 2017sep13:
MAX1 Android 7.1.2 TEST (I don't own the phone, so is not tested (TESTING on your risck!)
http://www.mediafire.com/file/gqzxzi9yf8l810k/X900_RR584-abm30_13sep17-01.zip
NEWS on 2017sep15:
New X800+ ROM with IR BLASTER WORKING!!!!!!!!
remouved on 19sep17: BT not work!
UPDATED BELOW!
Update on 2017sep19:
http://www.mediafire.com/file/r3zd31iwmaowaya/X800_CN_RR584_IR_BT-GPS-abm30_19sep17-03mod.zip
- BT, IR blaster is working now
- GPS: added config from Credomo (THANK YOU!) but need to be tested. Look for: https://forum.xda-developers.com/showpost.php?p=73849995&postcount=432
- I hope everithing else (snap camera has some FC but Open camera works)
Update on 2017oct02:
- updated to Ressurection Remix 585 with theme support!
-updated GPS also, a bit better in outside, not necessary in indoor, but lets test it a bit longer.
https://www.mediafire.com/file/9qrimxn55xprkae/X800_RR585_CN_abm30_01oct17-02LiblocOP2.zip
Update on 2017oct04:
US TEST VARIANT - DO NOT TRY ON CN MODEL!
TEST IT ON YOUR OWN RISK...BACKUP FIRST!
http://www.mediafire.com/file/wws1dc9vfyl63st/X800_US_RR584-04oct17-01.zip
Update on 2017oct08:
http://www.mediafire.com/file/ovy3k7dgj0mqzgy/X800_RR585_CN_abm30_08oct17-01gyro.zip
-Updated RR585 to oct 07 version
-Gyro config changed with new one. i hope now is working good. (not tested because I don't own VR glases)
Update on 2017nov11:
https://www.mediafire.com/file/6csmiz8zh6vwxf7/X800_CN_RR585CLEAN_11NOV17-02.zip
-Updated RR585 to oct 18 version (maybe last version before OREO! - because OnePLUS 2 version -from where I am porting - has stopped at oct18 version!)
-cleaned up sound, Dolby taken out, solved in call volume changing.
-For Dolby I put a separate DOLBY ATMOS zip here: https://www.mediafire.com/file/l5oawi6d2z7czhb/dolby.zip that can be installed via TWRP as usual.
After install allways wipe cache and Dalvik!
Screen shoots:
MAX_1 ROMs:
http://www.mediafire.com/folder/8q0kf8apyxh85/MAX1"]http://www.mediafire.com/folder/8q0kf8apyxh85/MAX1"]http://www.mediafire.com/folder/8q0kf8apyxh85/MAX1
If you like my work you can donate me a coffee.
Thank you!
Has anyone tried this on the US version?
attitude12 said:
Has anyone tried this on the US version?
Click to expand...
Click to collapse
The American version can also be brushed into this ROM.
---------- Post added at 03:25 PM ---------- Previous post was at 03:22 PM ----------
I am a friend of the ROM developer, his name is Pan Youjie (screen name Flour Mo). How did you find this ROM? Please tell me, thank you.
---------- Post added at 03:27 PM ---------- Previous post was at 03:25 PM ----------
ABM30 said:
First: I am not a developer but I like to cook so I thought to share with you the modified version by me for Le 1 Pro/Le Max CN cyanogenmod14 7.1 ROM find on LeEco.Re by RoyalCasin (THANK YOU FOR SHARING!)
The ROM is tested on CN version but maybe it works also on US version because it not contain any modem/radio or other additional parts for other partition then system and boot. TRY IT ON YOUR OWN RISK!...but share with us your experience to get thinks better.
It has some htc flavor: contains Blenkfeed ant trebouchet.
Install in TWRP (I use 3.0.2)
1. Delete cashe, system, dalvick, data
2. Instal ROM
3. delete cashe and dalvick
4. let device to boot up...first boot can take up to 5-6 min!.
5. Enjoy!
Bugs:
1. Bluetooth not work
2. Camera sometimes work sometimes not. BUT OPEN CAMERA WORK!!!!
3. Some large vidget (like clock-wether widget from htc - can be selected just if you are in smalest descktop size.
After you positioned you can come back to default descktop size - but not greater.
4. And a few more maybe....
DOWNOAD:
http://www.mediafire.com/file/jsc5q4w6pe4j5om/CM14_NOUGAT711_ABM30_31dec2016-OPONEW-10.zip
Screen shoots:
Click to expand...
Click to collapse
I am a friend of the ROM developer, his name is Pan Youjie (screen name Flour Mo). How did you find this ROM? Please tell me, thank you.
266APP said:
The American version can also be brushed into this ROM.
---------- Post added at 03:25 PM ---------- Previous post was at 03:22 PM ----------
I am a friend of the ROM developer, his name is Pan Youjie (screen name Flour Mo). How did you find this ROM? Please tell me, thank you.
---------- Post added at 03:27 PM ---------- Previous post was at 03:25 PM ----------
I am a friend of the ROM developer, his name is Pan Youjie (screen name Flour Mo). How did you find this ROM? Please tell me, thank you.
Click to expand...
Click to collapse
First I need to thank then to you and your friend Pan Youjie for ROM, I find it on LeEco.re forum. I added a bit htc sense flavor, open camera, and take out the additional mbn files to try to make the rom compatible with US version to. I try to find working files for Bluetooth also but till now without success. (I have limited development skills, maybe your friend can Pan Youjie help us to solve also the Bluetooth issue?)
Thank you again and hope is not a problem that I modified the ROM, I give the credit to developers. Together we can do things better.
P.S. It seems that the ROM is working on US version then?!
266APP said:
The American version can also be brushed into this ROM.
---------- Post added at 03:25 PM ---------- Previous post was at 03:22 PM ----------
I am a friend of the ROM developer, his name is Pan Youjie (screen name Flour Mo). How did you find this ROM? Please tell me, thank you.
---------- Post added at 03:27 PM ---------- Previous post was at 03:25 PM ----------
I am a friend of the ROM developer, his name is Pan Youjie (screen name Flour Mo). How did you find this ROM? Please tell me, thank you.
Click to expand...
Click to collapse
OT: about the ROM, I have found it on a Chinese forum, and I shared it on leeco.re giving credits to the developer( flour mo, since his cyano ROMs was already shared there). If this may cause problems to the developer, sorry about that. ( just tell me and I will remove it).
My only intent was to improve the great job done by the developer sharing it to people who own this phone.
Has anyone tried on US version? I have US version, but I'm afraid to try because I screwd up old phone...
MasterChief2 said:
Has anyone tried on US version? I have US version, but I'm afraid to try because I screwd up old phone...
Click to expand...
Click to collapse
Doesn't work ! I deleted the mbn files and flashed the ROM. After flashing it will go into the fastboot mode.
Played also with X800 US kernels...
When you replace the Kernel with some X800 US kernels like Aurel or CrisBal (obviously not 7.1.1 versions) it will bootloop which is normal as the kernel didn't match.
So the main problem persist anyway, we need a correct Kernel for our X800 US Version !
I want to get this rom on my US version. Is there some developer that can do it for us? I am ready to do some donations if we get stable firmware. I think other phone owners can do it as well.
BetaHydri said:
Doesn't work ! I deleted the mbn files and flashed the ROM. After flashing it will go into the fastboot mode.
Played also with X800 US kernels...
When you replace the Kernel with some X800 US kernels like Aurel or CrisBal (obviously not 7.1.1 versions) it will bootloop which is normal as the kernel didn't match.
So the main problem persist anyway, we need a correct Kernel for our X800 US Version !
Click to expand...
Click to collapse
Glad to see you here BetaHydri, all respect to you. Have you tried to change also the firmware folder from etc with the one from US model (maybe also Bluetooth and wifi also). Also in lib/lib64 folder to change the hw and modules folder with one from US model?
But that is true, if the kernel doesn't match it wont boot. And, unfortunately I am not skilled enough (yet) for kernel building.
Maybe we can ask Pan Youjie ( Flour Mo) -who is the bulder of CM 14.1.1 kernel for CN version-to help us in building a kernel also for US model. After that the work is much easier.
Unfortunately I don't have any LeEco 1 PRO US model around to try/work on.
QCN Backup when playing with CM14.1 + kernels on X800 US
ABM30 said:
Glad to see you here BetaHydri, all respect to you. Have you tried to change also the firmware folder from etc with the one from US model (maybe also Bluetooth and wifi also). Also in lib/lib64 folder to change the hw and modules folder with one from US model?
But that is true, if the kernel doesn't match it wont boot. And, unfortunately I am not skilled enough (yet) for kernel building.
Maybe we can ask Pan Youjie ( Flour Mo) -who is the bulder of CM 14.1.1 kernel for CN version-to help us in building a kernel also for US model. After that the work is much easier.
Unfortunately I don't have any LeEco 1 PRO US model around to try/work on.
Click to expand...
Click to collapse
And Important Infos BTW: When some others are having in mind to play around with CM14.1 + foreign kernels:
- My above tests killed my IMIE and QCN Config.
- So important: backup your own QCN file:
--> Switch X800 US into ADB Diagnostic Mode - how:
1. adb shell
2. su
3. setprop sys.usb.config diag,adb
4. A new Qualcomm USB COM Diag Device should apear ( you have to install first the Qualcomm Drivers )
5. Open Qfil 2.7.429 or 2.7.430, Choose the Serial Qualcomm COM port from 4.
6. Click in QFIL on menu Tools and choose QCN Backup Restore
7. Make a backup from your QCN File, dont't forget to check mark Enable Multi-SIM before backup !
Cheers BetaHydri !
After installed the fixed BT version ROM, neither the Open Camera App nor the stock camera app works. I also try other camera apps from playstore, however, none of them works.
borg79 said:
After installed the fixed BT version ROM, neither the Open Camera App nor the stock camera app works. I also try other camera apps from playstore, however, none of them works.
Click to expand...
Click to collapse
Have you made a wipe cache/Dalvik before installing new version? Try to make also now a wipe cache/wipe Dalvik and restart.
Else make a clean reinstall (always is safer!), the camera should work. (The open camera, the other one not always)
BTW, in next revision I take out CM camera and put Google Nexus 6P which it works and also working on LineageOS (former CM) nougat 7.1.1
Some work to do on wifi, still, maybe next week I come with new revision.
Anyone have a version of this for CN without HTC stuff but has Bluetooth working?
ABM30 said:
Have you made a wipe cache/Dalvik before installing new version? Try to make also now a wipe cache/wipe Dalvik and restart.
Else make a clean reinstall (always is safer!), the camera should work. (The open camera, the other one not always)
BTW, in next revision I take out CM camera and put Google Nexus 6P which it works and also working on LineageOS (former CM) nougat 7.1.1
Some work to do on wifi, still, maybe next week I come with new revision.
Click to expand...
Click to collapse
I do perform double wipe and clean install, but there is no luck with the camera app, the screen just black out !
thejodster said:
Anyone have a version of this for CN without HTC stuff but has Bluetooth working?
Click to expand...
Click to collapse
I will do one in the next days. ....
LINK ON FIRST PAGE!
ABM30 said:
Glad to see you here BetaHydri, all respect to you. Have you tried to change also the firmware folder from etc with the one from US model (maybe also Bluetooth and wifi also). Also in lib/lib64 folder to change the hw and modules folder with one from US model?
But that is true, if the kernel doesn't match it wont boot. And, unfortunately I am not skilled enough (yet) for kernel building.
Maybe we can ask Pan Youjie ( Flour Mo) -who is the bulder of CM 14.1.1 kernel for CN version-to help us in building a kernel also for US model. After that the work is much easier.
Unfortunately I don't have any LeEco 1 PRO US model around to try/work on.
Click to expand...
Click to collapse
I'm glad you shared this ROM with XDA, and the developer himself agreed. We are all from China, so English is not very good, please forgive me. Are you willing to donate to developers to fix BUG faster? Such as camera. Voluntary, of course. We have opened the CM14.1 kernel source code, and we hope to develop together, such as BetaHydri, or more developers.
Kernel source:https://github.com/Silentlys/android_kernel_letv_msm8994
@BetaHydri
---------- Post added at 01:25 PM ---------- Previous post was at 01:11 PM ----------
BetaHydri said:
And Important Infos BTW: When some others are having in mind to play around with CM14.1 + foreign kernels:
- My above tests killed my IMIE and QCN Config.
- So important: backup your own QCN file:
--> Switch X800 US into ADB Diagnostic Mode - how:
1. adb shell
2. su
3. setprop sys.usb.config diag,adb
4. A new Qualcomm USB COM Diag Device should apear ( you have to install first the Qualcomm Drivers )
5. Open Qfil 2.7.429 or 2.7.430, Choose the Serial Qualcomm COM port from 4.
6. Click in QFIL on menu Tools and choose QCN Backup Restore
7. Make a backup from your QCN File, dont't forget to check mark Enable Multi-SIM before backup !
Cheers BetaHydri !
Click to expand...
Click to collapse
Nice to meet you, BetaHydri. I admire you very much, thank you for the development of a good CM12.1. I am a friend of the CM14.1 developer, we are all from China, my English may not be great, please understand. We have to open the LE1 PRO CM14.1 kernel source code, hope you can also join in development as soon as possible, repair the camera does not work, we believe that you have this ability, I also hope you join CPU/GPU overclocking and do some kernel optimization. Thank you very much。
Kernel source:https://github.com/Silentlys/android_kernel_letv_msm8994
ABM30 said:
Have you made a wipe cache/Dalvik before installing new version? Try to make also now a wipe cache/wipe Dalvik and restart.
Else make a clean reinstall (always is safer!), the camera should work. (The open camera, the other one not always)
BTW, in next revision I take out CM camera and put Google Nexus 6P which it works and also working on LineageOS (former CM) nougat 7.1.1
Some work to do on wifi, still, maybe next week I come with new revision.
Click to expand...
Click to collapse
I just download your latest version and perform a clean install, the result is same as before, the camera apps doesn't work, showing just a blank screen. My phone is the LeEco Max and not the LeEco 1 Pro, I just modified the file "updater-script" and install it. I attach a log file for your reference.
borg79 said:
I just download your latest version and perform a clean install, the result is same as before, the camera apps doesn't work, showing just a blank screen. My phone is the LeEco Max and not the LeEco 1 Pro, I just modified the file "updater-script" and install it. I attach a log file for your reference.
Click to expand...
Click to collapse
Now I understood, because Max has another hardware (camera is different) some files changes/additions need to be made in the rom. I will try to make the changes necessary (also adding the fingerprint files needed for MAX), but I need your help in testing because I don't have the phone and maybe I will not succeed from the first try. I will give you a replay when I have a first variant for trying out.
Any way, good to hear that the rom boot up, the kernel is matching then.
In a day or two I'll be back!
Hi @ABM30
First of all, thank you for your effort.
I also managed to successfully flash the ROM on my Le Max x900+ after i delete the #Assert line from the "updater-script". I am glad that we have the perspective for a fully working CM 14.1.
Indeed, the Camera does not work on x900. There is also no Fingerprint, IR Blaster and NFC, but that's not a big deal for the latest two options for now. Fingerprint would be nice to have though.
I would also gladly be your tester for x900+ you have the time to develop the ROM further.
Thank you again. Best regards
Sirrr said:
Hi @ABM30
First of all, thank you for your effort.
I also managed to successfully flash the ROM on my Le Max x900+ after i delete the #Assert line from the "updater-script". I am glad that we have the perspective for a fully working CM 14.1.
Indeed, the Camera does not work on x900. There is also no Fingerprint, IR Blaster and NFC, but that's not a big deal for the latest two options for now. Fingerprint would be nice to have though.
I would also gladly be your tester for x900+ you have the time to develop the ROM further.
Thank you again. Best regards
Click to expand...
Click to collapse
OK, then the first attempt (TRY IT ON YOUR OWN RISK! on X800 wont finalize the boot proces, it stuck on Cianogen boot!):
http://www.mediafire.com/file/huzduh1592esfft/X900_CM141mod_8ian17-01.zip
It has the assert for X900 so you don't need to delete anything.
If the boot is successful then try out and tell me how it works. Thanks!
Any logcat will be useful.
Introduction
NOTE:
Hello everyone, this is my first kernel for the Moto G4 Plus. I will try to maintain a stable kernel however bugs might arise since I'm not a super star kernel developer. I hope you enjoy the releases.
Important information
I will not reply to complains that do not include clear steps to reproduce the bug, a logcat, and a console ramoops (if random rebooting) or a dmesg (any other issues). Follow this guide to do this.
Features
Here are the major features of the kernel (feel free to explore Github)
Update to date with the latest Linux upstream version (3.10.108-EOL)
Westwood as the default congestion algorithm with many more to choose from
Several subsystems converted to use power efficient workqueues
Compiled with Google's arm-eabi 4.9 toolchain
Audio control from flar2
Downloads
Oreo 8.0 : https://sourceforge.net/projects/babyfish-kernel/files/athene/oreo_caf/
Nougat 7.1 : https://sourceforge.net/projects/babyfish-kernel/files/athene/nougat_caf/
Nougat 7.0 Stock :https://sourceforge.net/projects/babyfish-kernel/files/athene/stock_nougat/
Installation:
NOTE: Please make sure that you return to the stock kernel of the ROM before flashing this kernel. The kernel is unified for Moto G4 and the Plus variant so everything should be working fine.
Install the latest adb and fastboot: https://developer.android.com/studio/releases/platform-tools.html#download
Grab the boot image from the download links above
Method 1:
Using adb and fastboot
Reboot into the bootloader using either restart and hold power button and volume down or adb:
Code:
adb reboot bootloader
Flash the boot image. Run the following command in the folder with the boot image and ensure fastboot is in your PATH:
Code:
fastboot flash boot <boot_image_name>.img
Reboot and profit!
Method 2: TWRP
Keep the bootimage on your phone's storage and boot to TWRP.
Install > Select Install Image > Choose the image > Boot partition > Reboot
Changelog
28 November 2017
Oreo-CAF:
Code:
Initial Release
Introduce Tossug Baby Fish kernel
Add Sound Control
Add TCP congestion algos
Disable crc check for 30% performance improvement in I/O
Linux 3.10.108
Nougat-CAF:
Code:
Initial Release
Introduce Tossug Baby Fish kernel
Add Sound Control
Add TCP congestion algos
Disable crc check for 30% performance improvement in I/O
Linux 3.10.108
Stock N:
Code:
FAQs
1.1 Q Can you help me I have this problem?
1.1 A I will surely try to help if proper bug reporting is done as per the fashion described above.
1.2 Q: Can you add xyz feature?
1.2 A: If you link me the commits or tell me what kernel you had the feature in, I can take a look at them. I will not add any useless governors or features that I don't find practical.
1.3 Q: How do I control the kernel?
1.3 A: I recommend using EX Kernel Manager or Kernel Auditor (Both need root)
1.4 Q: OMFG MY BATTERY SUXXXX PLS FIX!!!
1.4 A: The kernel doesn't drain any battery unless you have overclocked it, I have kept it at stock frequencies and voltages. Use an app like BetterBatteryStats to figure out what app is screwing with your phone.
Thanks to:
The various other developers for their patches (if you want a specific mention, please let me know)
All of you guys for viewing the thread
Thiago Neves @lcrd512 and Abhijeet Bohra.
Kernel source links.
8.0.0 CAF : https://github.com/tywinlannister7/android_kernel_motorola_msm8952/tree/oreo_caf
7.1 CAF : https://github.com/tywinlannister7/android_kernel_motorola_msm8952/tree/nougat_caf
7.0 Stock :
If you like my work, buy me an Appy Fizz or whatever you like
https://www.paypal.me/tywinlannister7 :good:
XDA:DevDB Information
Reviver Kernel, Kernel for the Moto G4 Plus
Contributors
tywinlannister7
Source Code: https://github.com/tywinlannister7/android_kernel_motorola_msm8952
Kernel Special Features:
Version Information
Status: Stable
Created 2017-11-28
Last Updated 2018-12-10
Screenshots
Some Screenshots
Will work on LOS, right? Sorry for asking this nooby question. I just want to be confirm before flashing. ?
tywinlannister7 said:
Some Screenshots
Click to expand...
Click to collapse
Which ROM is this?
Ayan Uchiha Choudhury said:
Which ROM is this?
Click to expand...
Click to collapse
DU 12 oreo
@tywinlannister7 Any plans on making some Device Specific ROM for Athene.? Since Invicta is out of scene now.
Thanks for the new addition in the family.
I hope this will be the favorite member of the family:laugh:
Where is the love for stock user?
thorin0815 said:
Where is the love for stock user?
Click to expand...
Click to collapse
There is a link for stock rom in the op though?
thorin0815 said:
Where is the love for stock user?
Click to expand...
Click to collapse
Stock version won't be released any sooner. I don't have the time for it right now and compilation process of stock kernel is a bit different than CAF kernels. Maybe before the second week of January.
briatide said:
There is a link for stock rom in the op though?
Click to expand...
Click to collapse
Empty as of now
ganeshkmr21 said:
@tywinlannister7 Any plans on making some Device Specific ROM for Athene.? Since Invicta is out of scene now.
Click to expand...
Click to collapse
IDK I don't have the time, we already have so many ROMs available. Creating a new ROM will be adding it to the huge list already available, from AOSP to LineageOS to Dirty Unicorns. I would rather work on optimizing what we have. Quality > Quantity.
jyoti.id said:
Will work on LOS, right? Sorry for asking this nooby question. I just want to be confirm before flashing.
Click to expand...
Click to collapse
Yes. 7.1 version for all N custom ROMs and 8.0 for all the O custom ROMs
DU 12 oreo
Blueman1990 said:
DU 12 oreo
Click to expand...
Click to collapse
about DU 12 oreo where can i get it ?
many thanks
i love new system
Does not boot on LOS15. Can anyone else confirm? Cant do logs cause my data port on my phone is broken. It sits on the boot screen like its loading but never fully boots.
Thank you bro!! finally an oreo kernel!
Where I can get DU 12?
Does this have color management?
And which kennel manager should i use with this?
Thanks
harshal2234 said:
Where I can get DU 12?
Click to expand...
Click to collapse
Its not out yet I guess
---------- Post added at 01:35 PM ---------- Previous post was at 01:33 PM ----------
Ashishliterally said:
Does this have color management?
And which kennel manager should i use with this?
Thanks
Click to expand...
Click to collapse
Bro its just a 2 page thread. At least read. That question has been answered, in the OP!
Can't I get the unofficial build?
Tried it but I got bootloop.
Using latest Resurrection Remix Rom With Stock kernel on XT-1643.
Missed the logcat.
Should I have to flash the magisk again after installing kernel?, may be this was the reaseon I got bootloop because boot.img was changed and again installing magisk could help with that.
Same for me. On LOS 14.1, XT1643
---------- Post added at 05:17 PM ---------- Previous post was at 05:16 PM ----------
ramansehra said:
Tried it but I got bootloop.
Using latest Resurrection Remix Rom With Stock kernel on XT-1643.
Missed the logcat.
Should I have to flash the magisk again after installing kernel?, may be this was the reaseon I got bootloop because boot.img was changed and again installing magisk could help with that.
Click to expand...
Click to collapse
I don't think so. If magisk is installed/flashed once, then no need of flashing ever again until you freshly install the rom. (AFAIK)
ramansehra said:
Tried it but I got bootloop.
Using latest Resurrection Remix Rom With Stock kernel on XT-1643.
Missed the logcat.
Should I have to flash the magisk again after installing kernel?, may be this was the reaseon I got bootloop because boot.img was changed and again installing magisk could help with that.
Click to expand...
Click to collapse
Same happened with me I was on Invicta os 8.0
Here's an incredibly smooth and battery friendly new ROM.
EDIT: I'm not updating this thread anymore, you can download the latest version here!
- New base + new security updates + new firmware (included)
- Cool bootanimation
- Multilanguage
- OTA Updates
- HOST file anti-advertising
- No Anti-RollBack
- Passes SafetyNet
- Third party themes unlocked
- Hardware optimization for fluency
- Battery optimization
- NEW themes
- NEW camera
- fast GPS lock
9.9.21 - NEW! <-- Please remove your google account(s) from your current system before you wipe and install the new ROM!
8.12.6 - last one based on china (and best battery)
NOTE: if you're dirty flashing, uninstall magisk BEFORE the first run to avoid bootloops. Then you can install it again afterwards. If you want to avoid ANY problem, always clean flash (wipe cache, dalvik, data)!
IF YOU'RE HAPPY ABOUT THIS ROM, feel free to send your love and support to BadWolf (the developer): https://www.paypal.me/BadWolfalfa
[EXTRAS]
Magisk + Extra debloaters + Fingerprint sensor always on enabler/disabler
Suggested firmware for latest global based version version: 8.10.18 - Download here
Suggested firmware for china version: 8.9.20 or 8.10.11 - Download here
KERNELS
For extra-smoothness you may want to try Floppy Kernel or Darkness Kernel
(both customisable with the Floppy manager attached below)
Also attached my profile, unzip and import it.
It's very simple: slightly underclocked to avoid overheating, soundboost, fiops i/o scheduler 256. Great for battery without compromises on performance even in games.
SOUND
Audiophile sound enhancement - Ainur Sauron III
[REAL TIME SUPPORT IN TELEGRAM]
https://t.me/revolutionmiuien (English chat)
https://t.me/RevolutionMIUI (Spanish chat)
Download link saying it's ROS-MIUI-MI5_8.9.29_v10-8.0.0??
Could you please provide more information about the ROM?
How is this one compared to Miui MS?
What changes does it have from the Chinese ROM?
Thanks..
Sent from my MI 5 using Tapatalk
i think its using prev rom because still have bugs of battery percentage location. its quite annoying for me..
does this ROM have the required firmware included ? probably yes. Does magisk work ? anybody tested ?
A few replies and more infos added to the OP. Also the links are updated, thanks to @Esputido:
Magisk and extreme debloaters link added in OP.
No battery bugs.
Excellent performance, also for gaming, no heating, awesome battery.
Better than MS and Masik at the moment.
dev>null said:
A few replies and more infos added to the OP. Also the links are updated, thanks to @Esputido:
This ROM comes with the firmware included since it's based on stock.
Magisk and extreme debloaters link added in OP.
No battery bugs.
Excellent performance, also for gaming, no heating, awesome battery.
Better than MS and Masik at the moment.
Click to expand...
Click to collapse
Thank you for changing it man
Enviado desde mi MI 5 mediante Tapatalk
---------- Post added at 02:48 PM ---------- Previous post was at 02:47 PM ----------
lilicaull said:
does this ROM have the required firmware included ? probably yes. Does magisk work ? anybody tested ?
Click to expand...
Click to collapse
It is fimwareless but in the web you can find the firmware to flash, this firmware is arb free in all devices. Magisk Works well
The Rom has real time support in telegram.
https://t.me/revolutionmiuien (English chat)
https://t.me/RevolutionMIUI (Spanish chat)
bug audifonos
very lag after root with magisk.
without root very smooth
baszu said:
very lag after root with magisk.
without root very smooth
Click to expand...
Click to collapse
Do you have any magisk module loaded? Which version? running butter smooth here with magisk 16.7
with the firmware in the OP the phone is stuck in a bootloop
Edit: nvm, got it to work thank you for the ROM
dev>null said:
Do you have any magisk module loaded? Which version? running butter smooth here with magisk 16.7
Click to expand...
Click to collapse
no module, just only clean root cause lag.
I root with latest stable magisk version 17.1
my step is
1. flash rom
2. firmware
3. magisk
4. wipe cache and dalvik
5. boot to system
Hi I'm new to ROS, is this debloated?
dmnzon said:
Hi I'm new to ROS, is this debloated?
Click to expand...
Click to collapse
Read more > FAQ / Characteristics : https://miui.revtechs.me/en/
https://web.telegram.org/#/[email protected]
https://t.me/revolutionmiuien
baszu said:
no module, just only clean root cause lag.
I root with latest stable magisk version 17.1
my step is
1. flash rom
2. firmware
3. magisk
4. wipe cache and dalvik
5. boot to ayatem
Click to expand...
Click to collapse
I was on Miui MS and wiped system, cache and Dalvik.
Installed RevOs and booted..
After first boot I went to recovery again and flashed magisk 17.1
After this boot again, it took more time than first ROM boot.
When it booted it was very laggy, so I waited a minute and restart.
After that it's working fine, no lag till now.
Enviado do meu MI 5 através do Tapatalk
daitalos said:
Read more > FAQ / Characteristics : https://miui.revtechs.me/en/
https://web.telegram.org/#/[email protected]
https://t.me/revolutionmiuien
Click to expand...
Click to collapse
Can i directly flash it? I'm from syberia rom. I will do clean flash, is there any conflicts?
dmnzon said:
Can i directly flash it? I'm from syberia rom. I will do clean flash, is there any conflicts?
Click to expand...
Click to collapse
from a different rom,always need clean flash..
conflicts?? ... Ofcourse no, if you do right installation
(better & before you flash it, read carefully FAQ etc)
Miui MS had much better battery then this one.
Unfortunately MS doesn't have multilanguage.
Enviado do meu MI 5 através do Tapatalk
can install gcam at this rom?