Help Needed ~ Lenovo Vibe Shot Z90-7 ~ How to set Band Priority - Lenovo Vibe Shot Questions & Answers

In short :
Lenovo Vibe Shot Z90-7
Current rom : S226 ( android 5.1) Pre-rooted
I need help setting band priority in Phone settings. I would like my phone to constantly look for LTE signal , only connect to 3g in brief periods when not finding LTE and reconnect to LTE as soon as found again.
The problem :
I have signal 2-3-sometimes 4 bars of LTE (2600mhz) however. once it drops for a second or two to Hspa it stays there and doesnt go back to lte. Resetting the modem to regain Lte doesnt always work, sometimes whole phone reboot is necessary. And since my carrier is LTE only (they rent 3g from other T-mobile) They dont like if im on 3g to much. And personally since i pay for 4g and have the signal. I would like to have it.
How i Got here :
I have started my long and unfruitful search after seeing that my internet kept dropping to 3g and staying there (untill i resetted modem)
Unknowingly i followed a guid, entered *#*#INFO#*#* > phone settings > set my phone to USA band. This kinda broke my phone since I live in Europe
Flashed Rom with Root (even bricked and unbricked it twice, but thats another story)
Then after long search i found another guide found here followed the guide and set my band to 46 (aka use all pretty sure thats also what it was like before) And now im pretty much back to where i started. With ofc lots of new learned information. But the same problem that i started with
So my choices are :
Enable all bands and let phone roam on 3g
Or what i did now : with adb shell and AT$QCBANDPREF command : enable all but channel : 9 (gsm 900) , 32 (lte 800) just in case it does work? , 33 (lte 2600) , 38 (wlan 2400)) So now my phone connects to LTE 90% of the time. But certain parts of the city i have no internet and ofc if i ever leave the city chance are high i wont have it there either. Neither are very good choices in my book. But for now i have the least worse one selected :/
*I tried to find Msl code to try to unlock lte bands with some guide. But no. As i understand correctly since its a snapdragon no msl and have to enable via adb fastboot?
*Tried to unlock bands guide found here But since phone doesn't have official root. Just pre-rooted (and cant find any real root) I cannot install the patch and thus QXDM /NV browser wont recognize my phone (everything stays greyed out) /
*And unfortunately the simple solution in androids settings - > mobiele networks - preffered network type : my only option with Lte is : LTE/WCDMA/GSM auto. Not that this matters since i also tried to downgrade to previous rom. and by miracle in previous rom i did have the option that stated 4g preferred. However, it still went back to hspa and stayed there. So no help there either
Im hoping im just thinking to deep and there is a simpler option. At the moment im thinking that maybe its because of the AT$QCBANDPREF command ? That i set the preferred network and soon as it finds one of the preferred network connections it connects and stays with it. (and thus not dropping 3g)
Edit : Build Prop : Im thinking there could be a good chance i can alter/add an option in my build prop to always make it look for a certain lte band? But im drawing a blank what that option would be.
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=LMY47O
ro.build.display.id=Z90a40_S226_151022_ROW
ro.build.version.incremental=Z90a40_S226_151022_ROW
ro.build.version.sdk=22
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=5.1
ro.build.version.security_patch=2015-11-01
ro.build.version.base_os=
ro.build.date=Thu Oct 22 17:59:40 CST 2015
ro.build.date.utc=1445507980
ro.build.type=user
ro.build.user=buildslave
ro.build.host=njbs13
ro.build.tags=release-keys
ro.build.flavor=zoom_row-user
ro.product.model=Lenovo Z90a40
ro.product.brand=Lenovo
ro.product.name=zoom_row
ro.product.device=zoom_row
ro.product.board=msm8916
# ro.product.cpu.abi and ro.product.cpu.abi2 are obsolete,
# use ro.product.cpu.abilist instead.
ro.product.cpu.abi=arm64-v8a
ro.product.cpu.abilist=arm64-v8a,armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=arm64-v8a
ro.product.manufacturer=LENOVO
ro.wifi.channels=
ro.board.platform=msm8916
# ro.build.product is obsolete; use ro.product.device
ro.build.product=zoom_row
# Do not try to parse description, fingerprint, or thumbprint
ro.build.description=zoom_row-user 5.1 LMY47O Z90a40_S226_151022_ROW release-keys
ro.build.fingerprint=Lenovo/zoom_row/zoom_row:5.1/LMY47O/Z90a40_S226_151022_ROW:user/release-keys
ro.build.characteristics=default
ro.lenovo.series=VIBE Shot
ro.lenovo.vibeui.apps=1f4f94a
ro.lenovo.vibeui.patch_mtk=
ro.lenovo.vibeui.patch_qcom=
ro.lenovo.vibeui.patch_intel=
ro.lenovo.vibeui.resources=6e3f17e
ro.lenovo.vibeui.components=a2c0c26
ro.lenovo.vibeui.tools=7fe0357
ro.lenovo.lvp.version=V2.6.0.0_1508211147_A1f4f94aR6e3f17eCa2c0c26T7fe0357P840b86d
persist.lenovo.feedback=false
# end build properties
#
# from device/lenovo/zoom_row/system.prop
#
#
# system.prop for msm8916
#
rild.libpath=/vendor/lib64/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
# Start in cdma mode
ro.telephony.default_network=9,1
debug.sf.hw=0
debug.egl.hw=0
persist.hwc.mdpcomp.enable=true
debug.mdpcomp.logs=0
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1
persist.demo.hdmirotationlock=false
#ro.hdmi.enable=true
#tunnel.decode=true
#tunnel.audiovideo.decode=true
#lpa.decode=false
#lpa.use-stagefright=true
#persist.speaker.prot.enable=false
#
# system props for the cne module
#
#persist.cne.feature=1
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
media.swhevccodectype=0
mm.enable.smoothstreaming=true
mmp.enable.3g2=true
media.aac_51_output_enabled=true
#codecs:DivxHD Divx FLAC QCP MP2TS 3G2 DTS AVI AC3 AAC
mm.enable.qcom_parser=3314275
# Default to AwesomePlayer
media.stagefright.use-awesome=true
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.netmgrd.qos.enable=true
#system props for time-services
persist.timed.enable=true
#
# system prop for opengles version
#
# 131072 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
# System property for cabl
ro.qualcomm.cabl=0
#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
telephony.lteOnCdmaDevice=1
#
# System props for bluetooh
# System prop to turn on hfp client
bluetooth.hfp.client=1
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=fluence
persist.audio.fluence.voicecall=true
persist.audio.fluence.voicerec=false
persist.audio.fluence.speaker=false
#Set for msm8916
tunnel.audio.encode = false
#Buffer size in kbytes for compress offload playback
audio.offload.buffer.size.kb=32
#use VERY_HIGH_QUALITY for audio resampler
af.resampler.quality=4
#Enable offload audio video playback by default
av.offload.enable=false
#enable voice path for PCM VoIP by default
use.voice.path.for.pcm.voip=true
#System property for FM transmitter
ro.fm.transmitter=false
#enable dsp gapless mode by default
audio.offload.gapless.enabled=true
#Audio voice concurrency related flags
voice.playback.conc.disabled=false
voice.record.conc.disabled=false
voice.voip.conc.disabled=false
#property to enable user to access Google WFD settings
persist.debug.wfd.enable=1
#property to enable VDS WFD solution
persist.hwc.enable_vds=1
#property to enable narrow search range for video encoding
vidc.enc.narrow.searchrange=1
ro.qcom.ad.sensortype=2
ro.qcom.ad=1
ro.lenovo.owner_sdcard_support=1
#enable atfwd
persist.radio.atfwd.start=true
# Enable silent PIN1
persist.radio.sap_silent_pin=1
#
# ADDITIONAL_BUILD_PROPERTIES
#
persist.sys.lenovo.shutdown=TRUE
persist.sys.lenovo.log.limit=4000
persist.sys.lenovo.log.disk=/storage/sdcard0
persist.sys.lenovo.log.system=TRUE
persist.sys.lenovo.log.kernel=TRUE
persist.sys.lenovo.log.other=TRUE
persist.sys.lenovo.log=FALSE
persist.sys.dloadmode.config=0
persist.sys.lenovo.Acrash.cnt=0
persist.sys.lenovo.Kcrash.cnt=0
persist.sys.lenovo.crash.path=/data/local/log/lastlog
persist.sys.lenovo.crash.out=/storage/sdcard0/log_out
ro.config.notification_sound=Notice.ogg
ro.config.alarm_alert=New_Morning.ogg
ro.config.ringtone=Fantastic_Clang.ogg
ro.config.ringtone_2=Fantastic_Clang.ogg
ro.config.sms_notifi_sound=Curiosity.ogg
ro.config.sms_notifi_sound_2=Curiosity.ogg
dalvik.vm.heapgrowthlimit=256m
keyguard.no_require_sim=true
ro.com.android.dataroaming=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
sys.lenovo.romui.version.sdk=3
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.vendor.extension_library=libqti-perfd-client.so
persist.radio.apm_sim_not_pwdn=1
persist.radio.sib16_support=1
dalvik.vm.heapstartsize=12m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=16m
dalvik.vm.heapmaxfree=32m
ro.lenovo.device=phone
ro.lenovo.platform=qualcomm
ro.com.google.clientidbase=android-lenovo
ro.lenovo.audioparaver=ZOOM_Audio_Parameter_ROW_PVT_20150630
ro.frp.pst=/dev/block/bootdevice/by-name/config
persist.cne.feature=0
ro.telephony.default_network=22,1
persist.radio.multisim.config=dsds
ro.product.ota.model=LenovoZ90a40_ROW
ro.lenovo.easyimage.enable=yes
ro.lenovo.systemverify.enable=yes
ro.product.sw.internal.version=Z90a40_USR_S226_1510221726_Q2020131.4_ROW
ro.lenovo.support.ipdial=true
ro.lenovo.region=row
ro.lenovo.sim=dsds
ro.lenovo.operator=open
ro.lenovo.bqb=pass
ro.lenovo.wificert=no
ro.lenovo.adb=apkctl,speedup
ro.lenovo.signalbars=four
ro.lenovo.videocall=false
ro.lenovo.vibeuistyle=true
persist.backgrounddata.enable=false
persist.lenovo.ltetype=CSFB
persist.log.debug=0
persist.sys.timezone=Asia/Shanghai
ro.product.locale.language=en
ro.product.locale.region=US
ro.sf.lcd_density=480
persist.radio.rat_on=combine
persist.radio.ruimenabled=true
persist.sys.ruimenabled=true
persist.radio.primarycard=true
persist.env.fastdorm.enabled=true
persist.sim.simlock=false
persist.sim.simunlock=false
ro.lenovopctl=1
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=5.1_r1
ro.com.google.clientidbase.ms=android-lenovo
ro.com.google.clientidbase.am=android-lenovo
ro.com.google.clientidbase.gmm=android-lenovo
ro.com.google.clientidbase.yt=android-lenovo
drm.service.enabled=true
ro.com.widevine.cachesize=16777216
persist.sys.dalvik.vm.lib.2=libart.so
dalvik.vm.isa.arm64.features=div
dalvik.vm.isa.arm.features=div
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
persist.gps.qc_nlp_in_use=1
persist.loc.nlp_name=com.qualcomm.location
ro.gps.agps_provider=1
ro.pip.gated=0
What i would like in short
I hope it can be done with this AT$QC command? new to this, but i have adb shell and su acces and minor understanding of what i did so far. Basicly i just want to tell my phone :
preferend band = 2600 // If not found then (and only then) go to other band (900mhz 3g) And ofc preferred band meaning it will also switch back once signal is re-established.
Thanks for reading and hoping someone will be able to help me out. (p.s sorry if im in wrong section, there is no lenovo vibe z90 thread, only vibe p1 and wasnt sure to post there, and all other z90 treads are mostly about roms :/ )

Related

[Q] Build.prop Defaults for Nitro HD

I recently modified a couple lines in my build.prop file attempting to gain access to more market apps, and in the process I believe I broke the LG OSP (On Screen Phone). Does anyone know (or can someone check and post) the default values for the following lines from the build.prop?
ro.product.model
ro.product.manufacturer
(And everyone else, feel free to use this thread to post/request other default values.)
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GRJ90
ro.build.display.id=GRJ90
ro.build.version.incremental=19d9f9b804
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.5
ro.build.date=Mon Oct 31 20:38:55 KST 2011
ro.build.date.utc=1320061135
ro.build.type=user
ro.build.user=nick.jeong
ro.build.host=i01buildserver
ro.build.tags=release-keys
ro.product.model=LG-P930
ro.product.brand=lge
ro.product.name=lge_iproj
ro.product.device=lgp930
ro.product.board=I_ATNT
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=LGE
ro.product.locale.language=en
ro.product.locale.region=US,fr
ro.wifi.channels=
ro.board.platform=msm8660
# ro.build.product is obsolete; use ro.product.device
ro.build.product=i_atnt
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=i_atnt-user 2.3.5 GRJ90 eng.nick.jeong.20111031.203437 release-keys
ro.build.fingerprint=lge/lge_iproj/lgp930:2.3.5/GRJ90/LG-P930-V10f.19d9f9b804:user/release-keys
# display lge software version
ro.build.lge.version.release=LG-P930-V10f-OCT-31-2011
# end build properties
#
# system.prop for surf
#
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.composition.type=gpu
debug.overlayui.enable=1
dalvik.vm.heapsize=96m
dev.pm.dyn_samplingrate=1
#
# system props for the cne module
#
#LGE_S sy.yun Temporary Blocked CNE feature
# Block reason :
# Do not add default entry in routing table when CNE is active
# Since CNE already takes care of adding default entry to main routing table,
# the call to addDefaultRoute in connectivity service causes another default entry is added.
# CNE also needs to take care of adding default entry in mPDP.
# LGE comment :
# As CNE does not create default routing table on version i_csfb_fc_3035 and 3037,
# LG Data Team have no chioce but to blocking CNE feature.
# But, As Qualcomm mentioned before, It may occur mpdp problem.
# Therefore, It will be fixed to create default route table by CNE before the mPDP feature is enabled.
#persist.cne.UseCne=vendor
persist.cne.UseCne=TemporaryBlockedByLGEData
#LGE_E sy.yun Temporary Blocked CNE feature
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
ro.hdmi.enable=true
lpa.decode=true
lpa.use-stagefright=true
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-fma2dp=false
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
#
# youngjun.yun.110420
# system props for NexPlayer
#
media.nexplayer.disable-player=false
media.nexplayer.disable-scan=false
#
#sejun.park 08.14
media.nexplayer.enable-lpa=true
lpa.decode=false
#
# system props for the data modules
#
ro.use_data_netmgrd=true
#
# system props for SD card emulation of emmc partition
#
ro.emmc.sdcard.partition=17
#system props for time-services
persist.timed.enable=true
# System props for audio
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
#
# system prop for opengles version
#
# 131072 is decimal for 0x20000 to report version 2
ro.opengles.version=131072
#
# system prop for Bluetooth Auto connect for remote initated connections
#
ro.bluetooth.remote.autoconnect=true
#
# system prop for Bluetooth FTP profile
#
ro.qualcomm.bluetooth.ftp=true
#
# system prop for requesting Master role in incoming Bluetooth connection.
#
ro.bluetooth.request.master=true
# system property for Bluetooth discoverability time out in seconds
# 0: Always discoverable
debug.bt.discoverable_time=0
#[email protected]
# System property for cabl
ro.qualcomm.cabl=1
#lock screen setting [[email protected]]
keyguard.no_require_sim=1
# system prpo for sound exeption
# [email protected]
ro.lge.sound.case.exception=true
#
# ADDITIONAL_BUILD_PROPERTIES
#
user.feature.ers=true
user.feature.flex=true
user.feature.lgdrm=true
user.feature.lgresource=true
user.feature.lgpoweroff=true
user.feature.imp_sf_flinger=false
user.feature.imp_listviewdrag=true
user.feature.preload_so=true
user.feature.preload_del=true
user.feature.lock_sui=true
user.feature.sui=true
user.feature.wapservice=true
user.feature.scroller=true
user.feature.veloctracker=true
user.feature.orientation=true
user.feature.cursorchecker=true
ro.config.ringtone=00_ATnT_Tone.ogg
ro.config.notification_sound=01_Acoustic_Guitar.ogg
ro.config.alarm_alert=Alarm_Beep01.ogg
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.locationfeatures=1
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=2.3_r7
ro.monkey=0
ro.com.google.clientidbase=android-lge
ro.com.google.clientidbase.gmm=android-lge
ro.com.google.clientidbase.yt=android-lge
ro.com.google.clientidbase.am=android-att-us
ro.com.google.clientidbase.ms=android-att-us
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Perfect! That solved my problem!

*INFO* [AMDB][ATT SGH-I337] (partition info, build.prop, kernel config)

Credits
Click to expand...
Click to collapse
To my source who wishes to be anonymous for providing me with all the info in this post.
Miscellaneous info
Click to expand...
Click to collapse
* build.prop
* kernel config
* Partition Info
Code:
apnhlos -> /dev/block/mmcblk0p1
mdm -> /dev/block/mmcblk0p2
sbl1 -> /dev/block/mmcblk0p3
sbl2 -> /dev/block/mmcblk0p4
sbl3 -> /dev/block/mmcblk0p5
aboot -> /dev/block/mmcblk0p6
rpm -> /dev/block/mmcblk0p7
tz -> /dev/block/mmcblk0p8
pad -> /dev/block/mmcblk0p9
efs -> /dev/block/mmcblk0p10
modemst1 -> /dev/block/mmcblk0p11
modemst2 -> /dev/block/mmcblk0p12
m9kefs1 -> /dev/block/mmcblk0p13
m9kefs2 -> /dev/block/mmcblk0p14
m9kefs3 -> /dev/block/mmcblk0p15
system -> /dev/block/mmcblk0p16 [SYSTEM]
persist -> /dev/block/mmcblk0p17
cache -> /dev/block/mmcblk0p18 [CACHE]
param -> /dev/block/mmcblk0p19
boot -> /dev/block/mmcblk0p20 [KERNEL]
recovery -> /dev/block/mmcblk0p21 [RECOVERY]
fota -> /dev/block/mmcblk0p22
backup -> /dev/block/mmcblk0p23
fsg -> /dev/block/mmcblk0p24
ssd -> /dev/block/mmcblk0p25
persdata -> /dev/block/mmcblk0p26
hidden -> /dev/block/mmcblk0p27
carrier -> /dev/block/mmcblk0p28
userdata -> /dev/block/mmcblk0p29 [DATA]
Other Stuff
Click to expand...
Click to collapse
* SELinux is turned on. Bootloader appears to be locked (I don't physically have the device, but we tried to flash the I9505 CF-Root, did not work, ODIN fails)
* The Kernel config does say that it can be "rooted".
* I am hoping SELinux is NOT turned out in the shipped firmware.
Mohan
mohan_kr said:
My source has access to the build. I have given few instructions, the initial ChainFire CF-ROOT does *NOT* work. If someone can PM me (while I get the partition info and see if there is shell access in recovery). It is set to I believe SEAndroid restrictive. Did pm ChainFire will wait and see (wish I had the device at hand). Am trying standard techiques to get the kernel and recovery images out..
Thanks
(not sure, why locale is not changed for ATT US release)
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JDQ39
ro.build.display.id=JDQ39.I337UCUAMDB
ro.build.version.incremental=I337UCUAMDB
ro.build.version.sdk=17
ro.build.version.codename=REL
ro.build.version.release=4.2.2
ro.build.date=Wed Apr 10 00:04:06 KST 2013
ro.build.date.utc=1365519846
ro.build.type=user
ro.build.user=se.infra
ro.build.host=SEP-133
ro.build.tags=release-keys
ro.product.model=SAMSUNG-SGH-I337
ro.product.brand=samsung
ro.product.name=jflteuc
ro.product.device=jflteatt
ro.product.board=MSM8960
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm8960
# ro.build.product is obsolete; use ro.product.device
ro.build.product=jflteatt
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=jflteuc-user 4.2.2 JDQ39 I337UCUAMDB release-keys
ro.build.fingerprint=samsung/jflteuc/jflteatt:4.2.2/JDQ39/I337UCUAMDB:user/release-keys
ro.build.characteristics=att
# Samsung Specific Properties
ro.build.PDA=I337UCUAMDB
ro.build.hidden_ver=I337UCUAMDB
ro.build.changelist=440216
ro.product_ship=true
ro.chipname=apq8064
# end build properties
#
# system.prop for surf
#
rild.libpath=/system/lib/libril-qc-qmi-1.so
ro.sf.lcd_density=480
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.composition.7x27A.type=mdp
debug.composition.7x25A.type=mdp
dalvik.vm.heapsize=24m
debug.composition.type=dyn
persist.hwc.mdpcomp.enable=true
service.camera.gpu.enable=0
#
# system props for the cne module
#
persist.cne.feature=0
#
# system props for the MM modules
#
media.stagefright.enable-player=true
media.stagefright.enable-meta=false
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.enable-commonsource=true
#
# system props for the LPA/TUNNEL
#
lpa.decode=false
tunnel.decode=true
lpa.use-stagefright=true
#
# system prop for opengles version
#
ro.opengles.version=131072
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.ds_fmc_app.mode=0
#
# system props for IMS module
#
persist.ims.regmanager.mode=0
#
# system prop for requesting Master role in incoming Bluetooth connection.
#
ro.bluetooth.request.master=true
#
# system prop for Bluetooth FTP profile
#
ro.qualcomm.bluetooth.ftp=true
#
# system prop for Bluetooth SAP profile
#
ro.qualcomm.bluetooth.sap=true
#
# system prop for Bluetooth Auto connect for remote initated connections
#
ro.bluetooth.remote.autoconnect=true
#
#system property for Bluetooth discoverability timeout in seconds
#0: Always discoverable
#debug.bt.discoverable_time=0
#
# System prop to disable strict mode flash on display
#
persist.sys.strictmode.visual=false
#
# System prop to enable/disable OMH. Enabled by default
#
persist.omh.enabled=1
#System prop to enable ehrpd capability
ro.config.ehrpd=true
# System property for cabl
ro.qualcomm.cabl=0
#
#System prop to determine availability of
#analog fm path
#
ro.fm.analogpath.supported=true
#
#System property for FM transmitter
#
ro.fm.transmitter=false
#
#System property for single instance recording
#
ro.fm.mulinst.recording.support=false
#
#System property for msm
#
ro.hw_plat=7x27a
#
# system props for SD card emulation of emmc partition
#
ro.emmc.sdcard.partition=18
#
# system property to enforce Phone Mode view
#
ro.screen.layout=normal
#
# Turn off tiled rendering
#
debug.enabletr=false
#
#System prop for setting the pixel format
#
ro.staticwallpaper.pixelformat=RGB_565
#
#System prop for disabling the meta data mode for encoder
#
debug.camcorder.disablemeta=0
#
# Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
#
# System prop for using landscape preview layout in camera
#
debug.camera.landscape=true
#
# System prop for capping scroll velocity
#
ro.max.fling_velocity=4000
#
#system prop for Bluetooth hci transport
#
ro.qualcomm.bt.hci_transport=smd
#
# System prop for Tvout/HDMI
#
persist.sys.camera.transform=0
persist.sys.camera.connect=0
persist.sys.videomode=0
ro.hdmi.enable=true
# System proverty for sys info indication
persist.radio.add_power_save=1
# System property for Default Brightness
ro.lcd_min_brightness=10
ro.lcd_brightness=143
# Keep SIM state on LPM mode
persist.radio.apm_sim_not_pwdn=1
# use se table when search list
persist.radio.use_se_table_only=1
# System prop for PLMN
persist.radio.fill_eons=1
#
# ADDITIONAL_BUILD_PROPERTIES
#
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=128m
dalvik.vm.heapsize=512m
dalvik.vm.heaputilization=0.25
dalvik.vm.heapidealfree=8388608
dalvik.vm.heapconcurrentstart=2097152
ro.vendor.extension_library=/system/lib/libqc-opt.so
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=512k
dalvik.vm.heapmaxfree=8m
ro.hwui.texture_cache_size=48
ro.hwui.layer_cache_size=32
ro.hwui.path_cache_size=8
ro.hwui.shape_cache_size=2
ro.hwui.gradient_cache_size=1
ro.hwui.drop_shadow_cache_size=4
ro.hwui.texture_cache_flush_rate=0.5
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=512
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=1024
ro.sec.fle.encryption=true
ro.hdcp2.rx=tz
ro.secwvk=144
ro.crypto.support=recovery_mount|others
ro.config.alarm_alert=Alarm_Morning_flower.ogg
ro.config.ringtone=ATT_Firefly_Default.ogg
ro.config.notification_sound=Whisper.ogg
ro.monkey=0
ro.error.receiver.default=com.samsung.receiver.error
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.setupwizard.mode=DISABLED
ro.com.google.apphider=off
ro.com.google.clientidbase=android-samsung
ro.com.google.clientidbase.ms=android-att-us
ro.com.google.clientidbase.am=android-att-us
ro.com.google.clientidbase.yt=android-samsung
ro.com.google.clientidbase.gmm=android-samsung
ro.com.google.gmsversion=4.2_r1
ro.kernel.qemu=0
ro.build.selinux=1
ro.config.tima=1
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=0
persist.gps.qc_nlp_in_use=0
Click to expand...
Click to collapse
Sent from my SGH-I747 using XDA Premium HD app
Jdq39? Is this the first time in the history of the world a Samsung phone had officially been on the latest build of android?
Sent from my SAMSUNG-SGH-I747
mohan_kr said:
My source has access to the build. I have given few instructions, the initial ChainFire CF-ROOT does *NOT* work. If someone can PM me (while I get the partition info and see if there is shell access in recovery). It is set to I believe SEAndroid restrictive. Did pm ChainFire will wait and see (wish I had the device at hand). Am trying standard techiques to get the kernel and recovery images out..
Thanks
(not sure, why locale is not changed for ATT US release)
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JDQ39
ro.build.display.id=JDQ39.I337UCUAMDB
ro.build.version.incremental=I337UCUAMDB
ro.build.version.sdk=17
ro.build.version.codename=REL
ro.build.version.release=4.2.2
ro.build.date=Wed Apr 10 00:04:06 KST 2013
ro.build.date.utc=1365519846
ro.build.type=user
ro.build.user=se.infra
ro.build.host=SEP-133
ro.build.tags=release-keys
ro.product.model=SAMSUNG-SGH-I337
ro.product.brand=samsung
ro.product.name=jflteuc
ro.product.device=jflteatt
ro.product.board=MSM8960
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm8960
# ro.build.product is obsolete; use ro.product.device
ro.build.product=jflteatt
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=jflteuc-user 4.2.2 JDQ39 I337UCUAMDB release-keys
ro.build.fingerprint=samsung/jflteuc/jflteatt:4.2.2/JDQ39/I337UCUAMDB:user/release-keys
ro.build.characteristics=att
# Samsung Specific Properties
ro.build.PDA=I337UCUAMDB
ro.build.hidden_ver=I337UCUAMDB
ro.build.changelist=440216
ro.product_ship=true
ro.chipname=apq8064
# end build properties
#
# system.prop for surf
#
rild.libpath=/system/lib/libril-qc-qmi-1.so
ro.sf.lcd_density=480
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.composition.7x27A.type=mdp
debug.composition.7x25A.type=mdp
dalvik.vm.heapsize=24m
debug.composition.type=dyn
persist.hwc.mdpcomp.enable=true
service.camera.gpu.enable=0
#
# system props for the cne module
#
persist.cne.feature=0
#
# system props for the MM modules
#
media.stagefright.enable-player=true
media.stagefright.enable-meta=false
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.enable-commonsource=true
#
# system props for the LPA/TUNNEL
#
lpa.decode=false
tunnel.decode=true
lpa.use-stagefright=true
#
# system prop for opengles version
#
ro.opengles.version=131072
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.ds_fmc_app.mode=0
#
# system props for IMS module
#
persist.ims.regmanager.mode=0
#
# system prop for requesting Master role in incoming Bluetooth connection.
#
ro.bluetooth.request.master=true
#
# system prop for Bluetooth FTP profile
#
ro.qualcomm.bluetooth.ftp=true
#
# system prop for Bluetooth SAP profile
#
ro.qualcomm.bluetooth.sap=true
#
# system prop for Bluetooth Auto connect for remote initated connections
#
ro.bluetooth.remote.autoconnect=true
#
#system property for Bluetooth discoverability timeout in seconds
#0: Always discoverable
#debug.bt.discoverable_time=0
#
# System prop to disable strict mode flash on display
#
persist.sys.strictmode.visual=false
#
# System prop to enable/disable OMH. Enabled by default
#
persist.omh.enabled=1
#System prop to enable ehrpd capability
ro.config.ehrpd=true
# System property for cabl
ro.qualcomm.cabl=0
#
#System prop to determine availability of
#analog fm path
#
ro.fm.analogpath.supported=true
#
#System property for FM transmitter
#
ro.fm.transmitter=false
#
#System property for single instance recording
#
ro.fm.mulinst.recording.support=false
#
#System property for msm
#
ro.hw_plat=7x27a
#
# system props for SD card emulation of emmc partition
#
ro.emmc.sdcard.partition=18
#
# system property to enforce Phone Mode view
#
ro.screen.layout=normal
#
# Turn off tiled rendering
#
debug.enabletr=false
#
#System prop for setting the pixel format
#
ro.staticwallpaper.pixelformat=RGB_565
#
#System prop for disabling the meta data mode for encoder
#
debug.camcorder.disablemeta=0
#
# Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
#
# System prop for using landscape preview layout in camera
#
debug.camera.landscape=true
#
# System prop for capping scroll velocity
#
ro.max.fling_velocity=4000
#
#system prop for Bluetooth hci transport
#
ro.qualcomm.bt.hci_transport=smd
#
# System prop for Tvout/HDMI
#
persist.sys.camera.transform=0
persist.sys.camera.connect=0
persist.sys.videomode=0
ro.hdmi.enable=true
# System proverty for sys info indication
persist.radio.add_power_save=1
# System property for Default Brightness
ro.lcd_min_brightness=10
ro.lcd_brightness=143
# Keep SIM state on LPM mode
persist.radio.apm_sim_not_pwdn=1
# use se table when search list
persist.radio.use_se_table_only=1
# System prop for PLMN
persist.radio.fill_eons=1
#
# ADDITIONAL_BUILD_PROPERTIES
#
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=128m
dalvik.vm.heapsize=512m
dalvik.vm.heaputilization=0.25
dalvik.vm.heapidealfree=8388608
dalvik.vm.heapconcurrentstart=2097152
ro.vendor.extension_library=/system/lib/libqc-opt.so
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=512k
dalvik.vm.heapmaxfree=8m
ro.hwui.texture_cache_size=48
ro.hwui.layer_cache_size=32
ro.hwui.path_cache_size=8
ro.hwui.shape_cache_size=2
ro.hwui.gradient_cache_size=1
ro.hwui.drop_shadow_cache_size=4
ro.hwui.texture_cache_flush_rate=0.5
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=512
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=1024
ro.sec.fle.encryption=true
ro.hdcp2.rx=tz
ro.secwvk=144
ro.crypto.support=recovery_mount|others
ro.config.alarm_alert=Alarm_Morning_flower.ogg
ro.config.ringtone=ATT_Firefly_Default.ogg
ro.config.notification_sound=Whisper.ogg
ro.monkey=0
ro.error.receiver.default=com.samsung.receiver.error
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.setupwizard.mode=DISABLED
ro.com.google.apphider=off
ro.com.google.clientidbase=android-samsung
ro.com.google.clientidbase.ms=android-att-us
ro.com.google.clientidbase.am=android-att-us
ro.com.google.clientidbase.yt=android-samsung
ro.com.google.clientidbase.gmm=android-samsung
ro.com.google.gmsversion=4.2_r1
ro.kernel.qemu=0
ro.build.selinux=1
ro.config.tima=1
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=0
persist.gps.qc_nlp_in_use=0
Click to expand...
Click to collapse
locale is set to gb on all major us carriers for some odd reason even on the s3 and note2 dont ask me why though lol
beanstown106 said:
locale is set to gb on all major us carriers for some odd reason even on the s3 and note2 dont ask me why though lol
Click to expand...
Click to collapse
OMG...are you gonna make a rom for us beans?
I hate to ask what may be a silly question, but does this have anything to do with an FM radio?
Code:
ro.fm.analogpath.supported=true
You might want to change the thread title typo of SGH-i377 to SGH-i337..
Sent from my Atrix HD Maxx...
fix-this! said:
OMG...are you gonna make a rom for us beans?
Click to expand...
Click to collapse
most likely when i get my vzw s4 i will make the rom multicarrier from the start ;P
added other interesting stuff
Added other interesting stuff to the OP.
SELinux is turned on at least on this device. I will post the system dump later. Bootloader appears to be not locked (phew!).
mohan_kr said:
Added other interesting stuff to the OP.
SELinux is turned on at least on this device. I will post the system dump later. Bootloader appears to be not locked (phew!).
Click to expand...
Click to collapse
weird as another user said his was locked up.
How are you determining SELinux is on? Permissive or Enforcing?
Also, I think CF-Root had issues on ENG builds for the 9505 too. If your friend has an engineering release, the same might be true.
fix-this! said:
weird as another user said his was locked up.
Click to expand...
Click to collapse
Sorry, corrected that (was correct in OP)..
romracer said:
How are you determining SELinux is on? Permissive or Enforcing?
Also, I think CF-Root had issues on ENG builds for the 9505 too. If your friend has an engineering release, the same might be true.
Click to expand...
Click to collapse
it is in build.prop and also in the pulled kernel config. Nope we tried the ODIN, refuses to flash the recovery..I will ask the friend to check the status and see what it says (whether restrictive or permissive)
Code:
CONFIG_SECURITY_SELINUX=y
# CONFIG_SECURITY_SELINUX_BOOTPARAM is not set
# CONFIG_SECURITY_SELINUX_DISABLE is not set
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_SEC is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_YAMA is not set
# CONFIG_IMA is not set
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="selinux"
---
from build.prop
ro.build.selinux=1
mohan_kr said:
Sorry, corrected that (was correct in OP)..
it is in build.prop and also in the pulled kernel config. Nope we tried the ODIN, refuses to flash the recovery..I will ask the friend to check the status and see what it says (whether restrictive or permissive)
Code:
CONFIG_SECURITY_SELINUX=y
# CONFIG_SECURITY_SELINUX_BOOTPARAM is not set
# CONFIG_SECURITY_SELINUX_DISABLE is not set
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_SEC is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_YAMA is not set
# CONFIG_IMA is not set
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="selinux"
---
from build.prop
ro.build.selinux=1
Click to expand...
Click to collapse
http://selinuxproject.org/page/SEAndroid#Getting_Started
Curious the output of some of that.
Mine says permissive for SELinux status
How do you check if bootloader is locked?
lowspeed said:
How do you check if bootloader is locked?
Click to expand...
Click to collapse
Go into Odin mode and check for "Write Protection: enabled"
Sent from my Nexus 4 using xda premium
my selinux status says permissive under about device
bossg4 said:
Go into Odin mode and check for "Write Protection: enabled"
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Thanks... It's locked... :-\
bossg4 said:
Go into Odin mode and check for "Write Protection: enabled"
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
OP, what does your friend's engineering device say in this regard? If the engineering device is not locked, then you should get a backup of aboot (p6 in your partition table I think). That's what they used to ultimately unlock the SGS3 on VZW. I don't know if it'll help here, but its a good first step.
dd if=/dev/block/mmcblk0p6 of=/sdcard/aboot.img
You may need root for that, so don't let the device slip away. I'm sure root will be along shortly.
romracer said:
OP, what does your friend's engineering device say in this regard? If the engineering device is not locked, then you should get a backup of aboot (p6 in your partition table I think). That's what they used to ultimately unlock the SGS3 on VZW. I don't know if it'll help here, but its a good first step.
dd if=/dev/block/mmcblk0p6 of=/sdcard/aboot.img
You may need root for that, so don't let the device slip away. I'm sure root will be along shortly.
Click to expand...
Click to collapse
Thissss right here needs to be achieved.
sgh-i747(d2att)(sgs3) on latest cm10.1 or ultimatum

[Q] How Could One Get 4G Working on Custom ROMs on a Virgin Mobile S3?

I have a Virgin Mobile S3.
So far, I have successfully flashed PA 3.69 and Liquidsmooth 2.9 on it. All went well with initialization and setup. However, data did not at first seem to work.
When I changed the network mode to CDMA/EvDo, I was able to receive a 3G signal, but never was able to get 4G to work.
I flashed a modem I found on another forum and altered the apns-conf.xml in /system/etc, but that did not help. I also flashed both ROMs on top of base build MD7, if that helps anyone.
Would data feasibly work if I flashed on top of MD4, instead?
Simple fix - maybe....
Higgs_Boson said:
I have a Virgin Mobile S3.
So far, I have successfully flashed PA 3.69 and Liquidsmooth 2.9 on it. All went well with initialization and setup. However, data did not at first seem to work.
When I changed the network mode to CDMA/EvDo, I was able to receive a 3G signal, but never was able to get 4G to work.
I flashed a modem I found on another forum and altered the apns-conf.xml in /system/etc, but that did not help. I also flashed both ROMs on top of base build MD7, if that helps anyone.
Would data feasibly work if I flashed on top of MD4, instead?
Click to expand...
Click to collapse
I was having the same problem and decided to check the easiest thing first - the setting for Mobile Networks (Settings->Wireless and Network->More Settings) was set to Global for some reason. I went under Network Mode and selected LTE/CDMA and the phone automatically rebooted. As soon as it was back up, it was in 4G!:highfive:
Give it a shot and see if it works for you. Sometimes the silliest things are the ones we overlook!
Just re flash the radio if you want to get service again.
Sent from my SPH-L710 using xda app-developers app
Work in progress...
Nobody seems to be able to get this working. I have spent many hours searching fourms.
I am willing to build from source if deemed necessary
I installed the latest stable sprint CyanogenMod (10.1.3) on my Virgin Mobile Galaxy S3
I am able to get full 3G but no 4G. I have tired the sprint modem, and two virgin mobile modems including the latest version. The modem does not seem to make a difference. I have copied the apns-conf.xml file and that did nothing. I did reboot and change radio modes. I think there is some software on the Virgin Mobile rom that makes it work. I have seen a few programs that run at startup. Of interest are "itson" and "chameleon". I think these enable 4G? how could I transfer these programs to run on CyanogenMod?
I am able to access 4g at full speed with the same modem and apns on the stock rom. I have TWRP backups of both CyanogenMod and the latest Virgin Mobile stock rom. I can switch between them easily.
Maybe there is an easy fix, via the build.prop?
Here is the build.prop
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JZO54K
ro.build.display.id=JZO54K.L710VPAMG2
ro.build.version.incremental=L710VPAMG2
ro.build.version.sdk=16
ro.build.version.codename=REL
ro.build.version.release=4.1.2
ro.build.date=Fri Jul 19 12:06:39 KST 2013
ro.build.date.utc=1374203199
ro.build.type=user
ro.build.user=se.infra
ro.build.host=SEP-73
ro.build.tags=release-keys
ro.product.model=SPH-L710
ro.product.brand=samsung
ro.product.name=d2vmu
ro.product.device=d2vmu
ro.product.board=MSM8960
ro.chipname=MSM8960
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product_ship=true
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm8960
# ro.build.product is obsolete; use ro.product.device
ro.build.product=d2vmu
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=d2vmu-user 4.1.2 JZO54K L710VPAMG2 release-keys
ro.build.fingerprint=samsung/d2vmu/d2vmu:4.1.2/JZO54K/L710VPAMG2:user/release-keys
ro.build.characteristics=chameleon
# Samsung Specific Properties
ro.build.PDA=L710VPAMG2
ro.build.hidden_ver=L710VPAMG2
ro.build.changelist=1293602
# end build properties
# 8960 RIL Basic
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=dyn
debug.compbypass.enable=1
debug.hwui.render_dirty_regions=true
dalvik.vm.heapsize=36m
debug.enable.wl_log=1
debug.mdpcomp.maxlayer=3
#
# system props for the cne module
#
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
persist.cne.feature=0
ro.hdmi.enable=true
lpa.decode=true
lpa.use-stagefright=true
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
# System props for audio
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
# System prop to select audio resampler quality
af.resampler.quality=255
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
#
# system prop for opengles version
#
# 131072 is decimal for 0x20000 to report version 2
ro.opengles.version=131072
#
# system property for Bluetooth Handsfree Profile version
#
ro.bluetooth.hfp.ver=1.6
#
#system prop for Bluetooth hci transport
ro.qualcomm.bt.hci_transport=smd
#
# system prop for requesting Master role in incoming Bluetooth connection.
#
ro.bluetooth.request.master=true
#
# system prop for Bluetooth Auto connect for remote initated connections
#
ro.bluetooth.remote.autoconnect=true
# system property for Bluetooth discoverability time out in seconds
# 0: Always discoverable
#debug.bt.discoverable_time=0
#system prop for switching gps driver to qmi
persist.gps.qmienabled=true
# System property for cabl
ro.qualcomm.cabl=1
#
# System prop for sending transmit power request to RIL during WiFi hotspot on/off
#
ro.ril.transmitpower=true
#
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
ro.hwui.text_cache_width=2048
#
# Supports warmboot capabilities
#
ro.warmboot.capability=1
ro.sf.lcd_density=320
# Use CDMALTE Phone
telephony.lteOnCdmaDevice=1
# Enable time services daemon
persist.timed.enable=true
# Keep SIM state on LPM mode
persist.radio.apm_sim_not_pwdn=1
# Don't wait the card state for RADIO POWER request
persist.radio.no_wait_for_card=1
# For sys info indication
persist.radio.add_power_save=1
# Snapshot Setting
persist.radio.snapshot_enabled=1
persist.radio.snapshot_timer=22
# Control EONS (true = EONS enabled, false = EONS disabled)
persist.eons.enabled=false
# Data modules
ro.use_data_netmgrd=true
# Default ECCList (Except USCC)
ro.ril.ecclist=112,911,#911,*911
# Chameleon Default Operator (VMU with Chameloen)
ro.cdma.default_numeric=310000
ro.cdma.default_alpha=Samsung
# Do not show no sim notification
ro.config.donot_nosim=true
# ItsOn
ro.itson.path=/carrier/itson/resources/
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.vendor.extension_library=/system/lib/libqc-opt.so
ro.error.receiver.default=com.samsung.receiver.error
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
dalvik.vm.heaputilization=0.25
dalvik.vm.heapidealfree=8388608
dalvik.vm.heapconcurrentstart=2097152
ro.hdcp2.rx=tz
ro.sec.fle.encryption=true
ro.config.alarm_alert=Walk_in_the_forest.ogg
ro.config.ringtone=01_Over_the_horizon_Acoustic.ogg
ro.config.notification_sound=S_Whistle.ogg
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.setupwizard.mode=OPTIONAL
ro.com.google.apphider=off
ro.com.google.clientidbase=android-samsung
ro.com.google.clientidbase.gmm=android-samsung
ro.com.google.gmsversion=4.1_r5
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Here is my current build.prop on CyanogenMod
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JDQ39E
ro.build.display.id=cm_d2spr-userdebug 4.2.2 JDQ39E eng.jenkins.20130923.122419 test-keys
ro.build.version.incremental=eng.jenkins.20130923.122419
ro.build.version.sdk=17
ro.build.version.codename=REL
ro.build.version.release=4.2.2
ro.build.date=Mon Sep 23 12:25:18 PDT 2013
ro.build.date.utc=1379964318
ro.build.type=userdebug
ro.build.user=jenkins
ro.build.host=cyanogenmod
ro.build.tags=test-keys
ro.product.model=SPH-L710
ro.product.brand=samsung
ro.product.name=d2spr
ro.product.device=d2spr
ro.product.board=MSM8960
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8960
# ro.build.product is obsolete; use ro.product.device
ro.build.product=d2spr
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=d2spr-user 4.1.2 JZO54K L710VPBMD4 release-keys
ro.build.fingerprint=samsung/d2spr/d2spr:4.1.2/JZO54K/L710VPBMD4:user/release-keys
ro.build.characteristics=default
ro.cm.device=d2spr
# end build properties
# system.prop for SPH-L710
#
# cannot take spaces
rild.libargs=-d /dev/smd0
ro.cdma.home.operator.numeric=310000
ro.cdma.home.operator.alpha=Sprint
ro.telephony.default_network=8
telephony.lteOnCdmaDevice=1
telephony.sms.pseudo_multipart=1
persist.radio.snapshot_enabled=1
persist.radio.snapshot_timer=22
persist.eons.enabled=false
#
# ADDITIONAL_BUILD_PROPERTIES
#
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.sf.lcd_density=320
ro.hwui.text_cache_width=2048
ro.vendor.extension_library=/system/lib/libqc-opt.so
ro.ril.hsxpa=1
ro.ril.gprsclass=10
persist.radio.add_power_save=1
persist.radio.snapshot_disabled=1
com.qc.hardware=true
persist.radio.apm_sim_not_pwdn=1
ro.ril.transmitpower=true
ro.opengles.version=131072
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
persist.audio.speaker.location=high
ro.qc.sdk.audio.fluencetype=fluence
persist.timed.enable=true
ro.emmc.sdcard.partition=17
ro.use_data_netmgrd=true
persist.data_netmgrd_nint=16
lpa.decode=true
rild.libpath=/system/lib/libril-qc-qmi-1.so
ril.subscription.types=NV,RUIM
ro.config.svlte1x=true
ro.cdma.subscribe_on_ruim_ready=true
persist.radio.no_wait_for_card=0
media.aac_51_output_enabled=true
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=dyn
persist.hwc.mdpcomp.enable=true
debug.mdpcomp.logs=0
ro.telephony.ril_class=SamsungQualcommRIL
ro.telephony.call_ring.multiple=0
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=192m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.rommanager.developerid=cyanogenmod
ro.url.legal=[LINK REMOVED DUE TO FORUM RULES]
ro.url.legal.android_privacy=[LINK REMOVED DUE TO FORUM RULES]
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dataroaming=false
ro.cm.version=10.1.3-d2spr
ro.modversion=10.1.3-d2spr
ro.config.ringtone=Orion.ogg
ro.config.notification_sound=Argon.ogg
ro.config.alarm_alert=Hassium.ogg
dalvik.vm.lockprof.threshold=500
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Please help! Any advice is appreciated!
I'm having the same issue with my Sprint Galaxy S3 on Credo Mobile. I get full 4G when i'm using a Touchwiz rom, but not with Cyanogenmod, nor any AOSP based ROMS.
drsn0w said:
I'm having the same issue with my Sprint Galaxy S3 on Credo Mobile. I get full 4G when i'm using a Touchwiz rom, but not with Cyanogenmod, nor any AOSP based ROMS.
Click to expand...
Click to collapse
"Newer" S3, and I don't get any data connection at all, despite a good signal.
drsn0w said:
I'm having the same issue with my Sprint Galaxy S3 on Credo Mobile. I get full 4G when i'm using a Touchwiz rom, but not with Cyanogenmod, nor any AOSP based ROMS.
Click to expand...
Click to collapse
I'm also a Credo customer, and I've never gotten LTE service. For that matter, 3G service is spotty.
I am having the same problem on the Project x rom no 4g
Has anyone tried THIS 4g fix(second post)? I used this fix for my boost gs3, but it breaks MMS. Either 3g and MMS or 4g and no MMS with this fix.

Problems with upgrade to 4.3 T999UVUENC2 T-Mobile

I buy this t999 on internet, the display was broken and the seller told me that the model was i747, when i change the display.
I restore with KIES, the phone was upgrade to 4.3
The matter was thah te imei and S/N in case is not the same that appear in settings, i discover this after install.
The cell power on correctly, the matter is thah don´t the wifi, bluetooth; the camera says CAMERA ERROR, i try to install another app to works the camera but nothing happends.
When KIES upgrade the phone to 4.3, the version is UVUENC2.
What can i do to camera, wifi and bluetooh works, i was reading that its posible that my cell is T999L but i not shure,
Cause says thath can flash a rom of T999 in a T999L, sometimes when flash roms, don´t works some functions like camera, wifi, buetooth as mi cell.
http://forum.xda-developers.com/showthread.php?t=2370981
Can you help me, i´m noob in this cell.
I make root and make a backup of IMEI and build.drop
This is the content of build.drop file:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JSS15J
ro.build.display.id=JSS15J.T999UVUENC2
ro.build.version.incremental=T999UVUENC2
ro.build.version.sdk=18
ro.build.version.codename=REL
ro.build.version.release=4.3
ro.build.date=Sat Mar 8 19:58:03 KST 2014
ro.build.date.utc=1394276283
ro.build.type=user
ro.build.user=se.infra
ro.build.host=R0210-18
ro.build.tags=release-keys
ro.product.model=SGH-T999
ro.product.brand=samsung
ro.product.name=d2tmo
ro.product.device=d2tmo
ro.product.board=MSM8960
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8960
# ro.build.product is obsolete; use
ro.product.device
ro.build.product=d2tmo
# Do not try to parse ro.build.description or
.fingerprint
ro.build.description=d2tmo-user 4.3 JSS15J
T999UVUENC2 release-keys
ro.build.fingerprint=samsung/d2tmo/d2tmo:4.3/
JSS15J/T999UVUENC2:user/release-keys
ro.build.characteristics=tmo
# Samsung Specific Properties
ro.build.PDA=T999UVUENC2
ro.build.hidden_ver=T999UVUENC2
ro.build.changelist=1962493
ro.product_ship=true
ro.chipname=
# end build properties
#
# system.prop for surf
#
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=dyn
persist.hwc.mdpcomp.enable=true
debug.compbypass.enable=1
debug.hwui.render_dirty_regions=true
dalvik.vm.heapsize=36m
debug.enable.wl_log=1
debug.mdpcomp.maxlayer=3
#
# system props for the cne module
#
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/
OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/
UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
persist.cne.feature=0
ro.hdmi.enable=true
lpa.decode=true
lpa.use-stagefright=true
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
#
# system props for the data modules
#
ro.use_data_netmgrd=true
#system props for time-services
persist.timed.enable=true
# System props for audio
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
# System prop to select audio resampler quality
af.resampler.quality=255
# System prop to select MPQAudioPlayer by default
on mpq8064
mpq.audio.decode=true
#
# system prop for opengles version
#
# 131072 is decimal for 0x20000 to report version 2
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
#
# system property for Bluetooth Handsfree Profile
version
#
ro.bluetooth.hfp.ver=1.6
#
#system prop for Bluetooth hci transport
ro.qualcomm.bt.hci_transport=smd
#
# system prop for requesting Master role in
incoming Bluetooth connection.
#
ro.bluetooth.request.master=true
#
# system prop for Bluetooth Auto connect for remote
initated connections
#
ro.bluetooth.remote.autoconnect=true
# system property for Bluetooth discoverability
time out in seconds
# 0: Always discoverable
#debug.bt.discoverable_time=0
#system prop for switching gps driver to qmi
persist.gps.qmienabled=true
# System property for cabl
ro.qualcomm.cabl=1
# System property for Default touch key light
duration
ro.button_key_light=1500
#
# System prop for sending transmit power request to
RIL during WiFi hotspot on/off
#
ro.ril.transmitpower=true
#
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
ro.hwui.text_cache_width=2048
#
# Supports warmboot capabilities
#
ro.warmboot.capability=1
ro.sf.lcd_density=320
# Keep SIM state on LPM mode
persist.radio.apm_sim_not_pwdn=1
# System proverty for sys info indication
persist.radio.add_power_save=1
# use se table when search list
persist.radio.use_se_table_only=1
# System prop for PLMN
persist.radio.fill_eons=1
# System prop for SPN
persist.radio.prefer_spn=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.vendor.extension_library=/system/lib/libqc-
opt.so
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=96m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.hdcp2.rx=tz
ro.sec.fle.encryption=true
ro.config.alarm_alert=Walk_in_the_forest.ogg
ro.config.ringtone=CLEAN_Tmo_Jingle.ogg
ro.config.notification_sound=S_Whistle.ogg
ro.error.receiver.default=com.samsung.receiver.err or
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.crypto.support=recovery_mount|others
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.setupwizard.mode=OPTIONAL
ro.com.google.apphider=off
ro.com.google.clientidbase=android-samsung
ro.com.google.clientidbase.ms=android-hms-tmobile-us
ro.com.google.clientidbase.am=android-tmobile-us
ro.com.google.clientidbase.yt=android-samsung
ro.com.google.clientidbase.gmm=android-samsung
ro.com.google.gmsversion=4.3_r1
ro.build.selinux=1
ro.config.tima=1
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=0
persist.gps.qc_nlp_in_use=0
What can I do to make work mi wifi, bluetooth and camera.
Thansk a lot.
Sounds like another one of these.
http://forum.xda-developers.com/showthread.php?t=2672790
If you got UVUENC2 running on there either by kies or odin then at least the motherboard is a T999. Im wondering if maybe you got mixed components from whoever sold it to you.
Check the imei and sn against the sticker under the battery.
Sent from my SM-N900T using Tapatalk
DocHoliday77 said:
Sounds like another one of these.
http://forum.xda-developers.com/showthread.php?t=2672790
If you got UVUENC2 running on there either by kies or odin then at least the motherboard is a T999. Im wondering if maybe you got mixed components from whoever sold it to you.
Check the imei and sn against the sticker under the battery.
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
Thanks, exactly, i forgot coment, the IMEI and SN is not the same that the numbers that appears in Settings.
I discover this when i change the display, and kies flash until i wrote i747m and serial in Kies flash t-mobile rom.
Other thing that i forgot, when i flash the fhon in download mode, don appears the progress bar, in others models that i have always shows the progress at the same time in odin, and in this case only odin shows the progress.
Thanks
I would contact the seller for an explanation before going much further, especially regarding the imei.
DocHoliday77 said:
I would contact the seller for an explanation before going much further, especially regarding the imei.
Click to expand...
Click to collapse
I tried contact the seller but i don´t have any answer, for this i try to make work wifi, camera and bluetooh.
What else can I do?
PD; The phone is unlocked, and works to make and recive calls.
Find the thread in general that hss the dialer codes and use that to check the cameras firmware version. Then grab an ATT rom and see if there is a corresponding file in the cameradata folder and copy it to yours. (Or you could try just copying the whole folder to see if it works).
If that doesn't work, I'm not sure what else to tell you...
DocHoliday77 said:
Find the thread in general that hss the dialer codes and use that to check the cameras firmware version. Then grab an ATT rom and see if there is a corresponding file in the cameradata folder and copy it to yours. (Or you could try just copying the whole folder to see if it works).
If that doesn't work, I'm not sure what else to tell you...
Click to expand...
Click to collapse
I flahs drivers camera and doesn´t works, I root and flash recovery TWRP, i was reading that maybe need to flash a different kernel, the question is what kernel you recommend me to flash to try to work the hardware.
Thanks
Stock kernel is all I use. Kernel thread is in General section. All you can do is try a few and see.
You said you flashed the camera driver? What exactly did you fo and what did you flash? Did you use the dialer code to check the cam firmware version?
When in download mode does it show the model?
DocHoliday77 said:
Stock kernel is all I use. Kernel thread is in General section. All you can do is try a few and see.
You said you flashed the camera driver? What exactly did you fo and what did you flash? Did you use the dialer code to check the cam firmware version?
When in download mode does it show the model?
Click to expand...
Click to collapse
I used this code:
*#34971539# Camera Firmware Update
based on this thread
http://forum.xda-developers.com/galaxy-s3/general/jb-4-1-2-camera-driver-t2006128
Cause this was my case
Rear Camera ZDFE02
Phone FW ZDFI02
After flashing
Rear Camera ZDFE02
Phone FW ZDFE02
But doesn´t works
In /system/cameradata, do you see SlimISP_ZD.bin? Or something to that effect...
Rear camera is the firmware version currently being used by the camera. Phone FW is the firmware loaded on the phone along with the rom or device firmware. So initially, what was on the phone was newer (this is normal btw). We used to be able to write the newer fw from Phone to Cam ourselves, but Damsung patched against that in 4.1.2.
In other words, whst it says for phone and rear cam do not need to match. Just make suure you have that ZD file in the cameradata folder.
DocHoliday77 said:
In /system/cameradata, do you see SlimISP_ZD.bin? Or something to that effect...
Rear camera is the firmware version currently being used by the camera. Phone FW is the firmware loaded on the phone along with the rom or device firmware. So initially, what was on the phone was newer (this is normal btw). We used to be able to write the newer fw from Phone to Cam ourselves, but Damsung patched against that in 4.1.2.
In other words, whst it says for phone and rear cam do not need to match. Just make suure you have that ZD file in the cameradata folder.
Click to expand...
Click to collapse
The file that you say is in cameradata folder, i don´t lnow whats the matter, and why don´t work the camera, bluetooth, & wifi.
Thanks

HTC M8 build.prop restores after reboot

Hi guys,
Few months ago I updated my HTC One M8 to androd 6.0 and Sense 7. Yesterday I rooted my phone using some online tutorials because it was my first time. But, when I mount the system folder through root explorer and change the build.prop, after reboot the build.prop restores to default. After changing and saving I always go back to check if it's changed and it is, but after rebooting it goes back to default. I tried to copy my build.prop to my sd card, change it from my computer, deleting build.prop from my system folder and putting the new one there, but it just restores after rebooting. I also searched if there is another build prop, like in system/bin but there isn't. How can I change it?
Thanks in advance,
molivsoguma
On this device, system partition is write protected, even with root.
You need a modified kernel to disable the system write protection; and probably the easiest way to implement is wp_mod (write protection mod). You can get it here (just need wp_mod at bottom of first post - just flash in recovery): http://forum.xda-developers.com/htc-one-m8/development/rom-stock-unlocked-developer-sense-7-t3262894
Recommend making a TWRP backup before flashing, just in case anything goes wrong (always recommended before any mods).
Thanks, I will try it. The main reason why I'm trying this is because i want to enable multi window option. Will it work on this phone or it works only on Nexus?
It works, thanks again
Could you post the M8 Marshmallow build.prop please?
molivsoguma said:
Hi guys,
Few months ago I updated my HTC One M8 to androd 6.0 and Sense 7. Yesterday I rooted my phone using some online tutorials because it was my first time. But, when I mount the system folder through root explorer and change the build.prop, after reboot the build.prop restores to default. After changing and saving I always go back to check if it's changed and it is, but after rebooting it goes back to default. I tried to copy my build.prop to my sd card, change it from my computer, deleting build.prop from my system folder and putting the new one there, but it just restores after rebooting. I also searched if there is another build prop, like in system/bin but there isn't. How can I change it?
Thanks in advance,
molivsoguma
Click to expand...
Click to collapse
Hi,
I'm trying to get my M8 Dual SIM to appear as a regular M8.. Would you be so kind and post the build.prop for the M8 with Marshmallow?
Maybe this will help my endeavours..
Thanks in advance!
I hope I got this right. There you go:
ro.customer.HTC__J15=PROJECT_G0005_flag, 0x0034
ro.language.HTC__J15=LANGUAGE_ARA_flag, 0x0019
ro.customer.HTC__K18=PROJECT_G0005_flag, 0x0034
ro.language.HTC__K18=LANGUAGE_ISR_flag, 0x0038
ro.ril.enable.a52=0
ro.ril.enable.a53=1
ro.ril.enable.dtm=0
ro.ril.hsdpa.category=24
ro.ril.hsupa.category=6
ro.ril.hsxpa=4
ro.ril.fast.dormancy.rule=1
ro.ril.disable.fd.plmn.prefix=23402,23410,23411,23420,23594,27202,27205
ro.ril.enable.managed.roaming=1
ro.ril.enable.sdr=1
ro.ril.n-roaming.mcclist=219,204,234,272,222,240,232,238,260,425
ro.ril.show.all.plmn=1
ro.ril.enable.amr.wideband=1
ro.ril.enable.r8fd=1
ro.ril.disable.cpc=1
ro.product.locale.language=en
ro.product.locale.region=US
ro.product.locale=en-US
ro.com.google.clientidbase=android-htc-rev
ro.telephony.default_network=0
ro.ril.vmail.23415=1571,BT,121,VDF UK
ro.ril.vmail.27203=171
ro.ril.vmail.65502=181
ro.ril.vmail.27211=171
ro.ril.vmail.65510=100
ro.ril.vmail.22299=4133,3ITA
ro.ril.vmail.23410=901,O2 UK,905,TESCO,443,giffgaff
ro.ril.vmail.22201=41901,I TIM
ro.ril.vmail.22210=42020,Vodafone IT
ro.ril.vmail.22288=4200,I WIND
ro.ril.vmail.20801=888
ro.ril.vmail.20810=123
ro.ril.vmail.20826=777
ro.ril.vmail.42403=161
ro.product.model=HTC One_M8
ro.config.htc.enableCOTA=1
ro.telephony.ipv6_capability=1
ro.ril.enable.pre_r8fd=1
ro.ril.fd.pre_r8_tout.scr_off=2
ro.ril.fd.pre_r8_tout.scr_on=3
ro.ril.fd.r8_tout.scr_off=2
ro.ril.fd.r8_tout.scr_on=3
ro.ril.ltefgi=1578105984
ro.ril.ltefgi.rel9=2147483648
ro.ril.lte3gpp=35
ro.customer.default=PROJECT_G0005_flag, 0x0034
ro.language.default=LANGUAGE_WWE_flag, 0x0000
ro.ril.enable.enhance.search=1
ro.ril.gsm.amrwb=1
dev.defaultwallpaper=/system/customize/resource/wallpapers_00.jpg
ro.telephony.bl=27202
ro.apn.uservalue.protocol=IPV4V6
ro.cw.base.version=M60
# begin build properties
# autogenerated by buildinfo.sh
htc.build.stage=2
ro.aa.customizationid=1126034
ro.aa.project=M8_UL_M60_SENSE70_MR
ro.aa.maincid=HTC__001
ro.aa.modelid=0P6B10000
ro.aa.cidlist=HTC__001,HTC__J15,HTC__E11,HTC__203,HTC__102,HTC__405,HTC__A07,HTC__304,HTC__032,HTC__016,HTC__M27,HTC__K18,HTC__002,HTC__A48,HTC__Y13
ro.aa.rid=356
ro.cwkey=CWS__001
ro.aa.report=com
ro.aa.skulist=401
ro.aa.taskid=464360
ro.aa.mainsku=401
ro.aa.romver=6.12.401.4
ro.onecid=
ro.prot=true
ro.build.id=MRA58K
ro.build.display.id=MRA58K release-keys
ro.build.version.incremental=662736.4
ro.build.version.sdk=23
ro.build.version.preview_sdk=0
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=6.0
ro.build.version.security_patch=2015-12-01
ro.build.version.base_os=
ro.build.date=四 12月 17 14:12:08 CST 2015
ro.build.date.utc=1450332728
ro.build.type=userdebug
ro.build.user=buildteam
ro.build.host=ABM104
ro.build.tags=release-keys
ro.build.flavor=htc_m8-user
ro.product.model=htc_m8
ro.product.brand=htc
ro.product.name=htc_europe
ro.product.device=htc_m8
ro.product.board=MSM8974
# ro.product.cpu.abi and ro.product.cpu.abi2 are obsolete,
# use ro.product.cpu.abilist instead.
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.cpu.abilist=armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=
ro.product.manufacturer=HTC
ro.product.locale=en-AU
ro.wifi.channels=
ro.board.platform=msm8974
# ro.build.product is obsolete; use ro.product.device
ro.build.product=htc_m8
# Do not try to parse description, fingerprint, or thumbprint
ro.build.description=6.12.401.4 CL662736 release-keys
ro.build.fingerprint=htc/htc_europe/htc_m8:6.0/MRA58K/662736.4:user/release-keys
ro.build.characteristics=default
ro.build.description=6.12.401.4 CL662736 release-keys
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=6.12.401.4 CL662736 release-keys
ro.build.changelist=662736
ro.build.project=M8_UL_M60_SENSE70_MR:464360
ro.build.sku=HTC Europe
ro.build.buildline=M8UL_HTC_WWE_M60_CRC_Sense70_Stable_MR
ro.product.version=6.12.401.4
ro.build.languageremove=
ro.build.sense.version=7.0
Error of ro.build.version.htcsdk.
ro.build.chinasense=
# end build properties
#
# from device/htc/htc_m8/system.prop
#
#
# system.prop for msm8974
#
rild.libpath=/system/lib/libhtc_rilhook.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
# Default network type.
# 9 => GSM/UMTS/LTE mode preferred.
ro.telephony.default_network=9
#
# system props for display
#
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=gpu
persist.hwc.mdpcomp.enable=true
persist.hwc.partialupdate=1
ro.hwui.renderer.disable_opaque=true
ro.sf.lcd_density=480
debug.mdpcomp.logs=0
# Display Info
ro.product.display_resolution = 5 inch 1080p resolution
dalvik.vm.heapsize=512m
dalvik.vm.heapgrowthlimit=192m
dalvik.vm.heapstartsize=8m
dalvik.vm.heapmaxfree=8m
dalvik.vm.heapminfree=2m
dev.pm.dyn_samplingrate=1
persist.demo.hdmirotationlock=false
# +SSD_RIL
ro.baseband.arch=msm
persist.radio.process_sups_ind=1
# -SSD_RIL
# Enable IMS service by default
persist.radio.jbims=1
# Enable SAP slinet pin feature by default
persist.radio.sap_silent_pin=1
ro.hdmi.enable=true
tunnel.decode=true
tunnel.audiovideo.decode=true
lpa.decode=true
lpa.use-stagefright=true
persist.speaker.prot.enable=false
qcom.hw.aac.encoder=true
use.voice.path.for.pcm.voip=true
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
mm.enable.smoothstreaming=true
media.aac_51_output_enabled=true
#37491 is decimal sum of supported codecs in AAL
#codecs: AVI AC3 ASF AAC QCP DTS 3G2 MP2TS
mm.enable.qcom_parser=37491
# VIDC: debug_levels
# 1:ERROR 2:HIGH 4:LOW 0:NOLOGS 7:AllLOGS
vidc.debug.level=3
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.netmgrd.qos.enable=true
ro.data.large_tcp_window_size=true
#system props for time-services
persist.timed.enable=true
# System props for audio
# System props for soundhound
# bit 0: Music playback in headset mode
# bit 1: FM 48K
#persist.htc.audio.soundhound=1
#Buffer size in kbytes for compress offload playback
audio.offload.buffer.size.kb=1024
#Enable offload gapless
audio.offload.gapless.enabled=false
# System props for global effect
htc.audio.global.state=0
htc.audio.global.profile=0
htc.audio.q6.topology=0
htc.audio.global.speaker=1
htc.audio.srs.defaultbundleHS=MAX300
# System props for ALOGV
htc.audio.debug.printlow=0
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
#
# system prop for Bluetooth Dialup Networking
#
ro.qualcomm.bluetooth.dun=false
# system prop for Bluetooth FTP profile
ro.qualcomm.bluetooth.ftp=true
#
# system property for Bluetooth Handsfree Profile Wide Band Speech
#
ro.qualcomm.bluetooth.hfp.wbs=false
#
# system property for Bluetooth SIM Access Profile
#
ro.htc.bluetooth.sap=true
#
#system prop for Bluetooth hci transport
ro.qualcomm.bt.hci_transport=smd
#
# system prop for requesting Master role in incoming Bluetooth connection.
#
ro.bluetooth.request.master=true
#
# system prop for Bluetooth Auto connect for remote initated connections
#
ro.bluetooth.remote.autoconnect=true
# system property for Bluetooth discoverability time out in seconds
# 0: Always discoverable
#debug.bt.discoverable_time=0
# system property for Bluetooth Hardware information
ro.product.bluetooth=4.1
# config fm rssi threshold
#service.qct.fm.rssi=116
#SSD_BT- bluetooth
# system property for qcom Bluetooth stack
ro.qc.bluetooth.stack=bluedroid
# system property for bdaddr
ro.bt.bdaddr_path = /sys/module/htc_bdaddress/parameters/bdaddress
# BLE TAG (HtcBluetoothLeProfiles)
ro.bt.ble_tag = 1
# System property for cabl
#ro.qualcomm.cabl=1
#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
#+ SSD_RIL: disable default value by MASD request
#telephony.lteOnCdmaDevice=1
#- SSD_RIL: disable default value by MASD request
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
# ro.storage_structure: define the storage structure of this project
# FUSE: 0x8, FAT: 0x4, SD: 0x2, INS: 0x1
# Example: If the project has FUSE with SD card, the value should be defined as 10 (dec)
ro.storage_structure = 10
# ro.storage_encryption_type: define the storage encryption type of this project
# not support encryption: 0x0 block level: 0x1 file level: 0x2
ro.storage_encryption_type = 2
#For usb storage
ro.usb_host = 1
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
ro.qc.sdk.sensors.gestures=true
ro.qc.sdk.gestures.camera=false
ro.qc.sdk.camera.facialproc=false
#property to enable user to access Google WFD settings.
persist.debug.wfd.enable=1
#property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
#propery to enable VDS WFD solution
persist.hwc.enable_vds=1
# Following property will be reference by Settings.
ro.product.main_camera =HTC UltraPixel Camera
ro.product.front_camera = 5M
# Support HW rest
ro.product.hwreset = 1
ro.product.hwreset.timer1 = 6
ro.product.hwreset.timer2 = 9
# M8 HW info
ro.product.ram = 2GB
# wifi
wifi.softap.interface=wlan0
wifi.softapconcurrent.interface=softap.0
wifi.miracastconcurrent.scan=WCN3680
init.svc.wpa_supplicant=
init.svc.dhcpcd_wlan0=
dhcp.wlan0.autoip=
dhcp.wlan0.dns1=
dhcp.wlan0.dns2=
dhcp.wlan0.dns3=
dhcp.wlan0.dns4=
dhcp.wlan0.gateway=
dhcp.wlan0.ipaddress=
dhcp.wlan0.leasetime=
dhcp.wlan0.mask=
dhcp.wlan0.ooxx=
dhcp.wlan0.pid=
dhcp.wlan0.reason=
dhcp.wlan0.result=
dhcp.wlan0.server=
net.wlan0.dns1=
net.wlan0.dns2=
wifi.wpa_supp_ready=
wlan.driver.status=
wifi.interface=wlan0
wifi.supplicant_scan_interval=15
persist.wifi.v6=true
persist.wifi.v6.rs.count=5
persist.wifi.v6.rs.timeout=5
ro.product.wifi = 802.11 a/b/g/n/ac
sys.stt.ssr.no_prompt=1
tunnel.audio.encode = false
# For Embadded DIAG
ro.chipset.vendor=QCT
ro.chipset.model=MSM8974
ro.chipset.version=1.x
# ro.storage_encryption_type: define the storage encryption type of this project
# not support encryption: 0x0 block level: 0x1 file level: 0x2
ro.storage_encryption_type = 2
# Property to enable EAB service
persist.rcs.supported = 1
# Property to enable VT function in IMS library
persist.radio.VT_ENABLE = 1
# Property to enable HYBRID mode at android side, IMS daemon will use qmi to communicate with modem
persist.radio.VT_HYBRID_ENABLE = 1
# Property to enable VT AV timer, settings between audio/video codec
# DO NOT set this system property; per QCOM information, it should only apply to Fusion device
#persist.radio.VT_USE_MDM_TIME = 1
# Property to enable VT ROTATION in ims library
persist.radio.ROTATION_ENABLE = 1
# Property to enable PLI for VT call video quality
# persist.radio.RATE_ADAPT_ENABLE = 1
# Property to disable IMS_DEBUG log
persist.ims.disableDebugLogs = 1
# For VOLD storage master key encryption algorithm scrypt
ro.crypto.scrypt_params=16:3:1
# define the device properties of GSMA supported by current device
ro.htc.gsma.BATTERY_LOW_MODE = true
ro.htc.gsma.BATTERY_OFF_MODE = false
ro.htc.gsma.FELICA = false
ro.htc.gsma.HCI_SWP = true
ro.htc.gsma.MIFARE_CLASSIC = true
ro.htc.gsma.MIFARE_DESFIRE = true
ro.htc.gsma.MULTI_ACTIVE_CEE = true
ro.htc.gsma.NFC_FORUM_TYPE3 = false
ro.htc.gsma.OMAPI = true
#
# ADDITIONAL_BUILD_PROPERTIES
#
persist.preload.common=0
persist.zygote.preload_threads=3
persist.camera.antibanding=50
persist.camera.tuning_spec=htc
ro.com.android.dataroaming=false
keyguard.no_require_sim=true
ro.config.ringtone=Ring_Synth_04.ogg
ro.config.notification_sound=pixiedust.ogg
ro.carrier=unknown
ro.config.alarm_alert=Alarm_Classic.ogg
drm.service.enabled=true
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=6.0_r1
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=192m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.vendor.extension_library=/vendor/lib/libqc-opt.so
persist.radio.apm_sim_not_pwdn=1
persist.ims.disableDebugLogs=1
persist.ims.disableADBLogs=1
persist.ims.disableQXDMLogs=1
persist.ims.disableIMSLogs=1
persist.sys.dalvik.vm.lib.2=libart
dalvik.vm.isa.arm.variant=krait
dalvik.vm.isa.arm.features=default
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.gps.agps_provider=1
ro.expect.recovery_id=0x40d84d5b71da1caa03cc15fa17a4f3aff0a6b056000000000000000000000000

Categories

Resources