I read the rooting article of Lenovo P1 having S272ROW. I installed Stock ROM by flashing version S285_160525_ROW on my Lenovo Vibe P1 Turbo. While trying to boot into TWRP with the given image file at S272 article, my handset doesnt boots giving Too many links and stuck up at lenovo logo. Further, when I tried to flash the given image file - it sends but at the time of writing it gives the error as Invalid signature or data. Please help with respect to TWRP image file to run on S285 Stock Rom version.
Related
Hi all,
I've been playing around lately with this Dual Core Dual Sim device, named Intki E91, with Android 4.0.4, rooted it, then replaced the iPhone iOS style launcher with Samsung's TouchWiz launcher, all fine so far, but then proceeded to wipe all non-useful built-in apps with the help of Uninstall Master 3.2.0, then deleted all Chinese related stuff from the internal memory, at which point the phone resets, no longer boots and I am now stuck in the Android System Recovery 3e with no chance of ever restarting it. Power button + Volume Down takes me to a screen where it says "Enter factory mode" and it just hangs there so one has to remove the battery and then reboot only to get to the stock recovery again.
Now there is no ClockworkMod for this phone and the manufacturer here http://www.intkimobile.com/ did not reply to me when I mailed him about the problem, asking for the factory ROM.
I could only find a find a custom ROM (（E91动力）软件z19b-intki-e91-01_R01_user) on a Chinese website with a "MT6575_Android_scatter" file, but when attempting to flash it with SP Flash Tool 3.1304.0.119 it says Sp Flash Tool Error : 8200, "the load and target are inconsistent", "the load to be downloaded is for MT6575", "the target platform is MT6577_S00".
Afterwards, I looked for a different scatter file for 6577 processors and I found "MT6577_Android_scatter_emmc" file all over the web, then attempted to flash using that, but got the BROM ERROR : S_DA_EMMC_FLASH_NOT_FOUND (3144)
At this point I really do not know what else to attempt to revive this phone, I would really appreciate if someone extracted their stock ROM for this device and post it here as an "update.zip", or give instructions on how to bypass the SP Flash Tool errors, or made a custom recovery for this device so i could flash the above mentioned ROM with no errors, or even develop a custom ROM altogether.
Thanks for your time.
Edit: I flashed a custom recovery using the tutorial here: http://www.labandroid.com/china/2013/02/flash-cwm-recovery-to-mtk-phones-without-sp-flash-tool/ but it doesn't work, so now I no longer have a recovery.
My only hope is a solution through Smart Phone Flash Tool.
If only someone could make the errors go away...
The only thing left to do now is to try and format the Flash using SP Flash Tool, an see if that can enable a error-free flashing.
But it's a lot of hassle writing the imei's back afterwards. And if it doesn't work I will have a total brick...
Before proceeding, can someone confirm if formatting the flash fixes the SP Flash Tool errors (especially given its internal memory is a mere 512mb ? - could that be the cause of errors?)
Please advise...
Thanks
im in the same boat as u - struggling to find a working alps iphone 5 rom
hiphone5 MT6573
ushir said:
im in the same boat as u - struggling to find a working alps iphone 5 rom
Click to expand...
Click to collapse
Hello i have a clone hiphone 5 mt6573 and need some help please
can i install any custom roms please help. here's
my phones info
board: Unknown
bootloader: Unknown
brand: Aple
cpu_abi: Armeabi
cpu abi: Unknown
device: konka73_gb
display: alps.gb.fdd2.mp.v2.14
hardward: mt6573
manufacturer: Unknown
model: phone5
product: konka73_gb
Hi, Devs!
i'm having problem with flashable zips. :crying:Every time i flash a zip in TWRP
which is not specially made for Zenfone 2 x86 devices it shows me an error
"updater process ended with error 255":crying:
I also changed the 'update-binary' file from METAF folder from the Zenfone to firmware. But again it shows me another error of "updatre process ended
with error 6".:crying:
Someone can please tell me how could i make zips X86 device compitable?
There is a TWRP available for the Zenfone 2. May not be the latest but it works, its in either Android Developement or Original Android Developement.
i have TWRP
But i have TWRP version 3.0.0.0?
But let me know that the above problem is becouse of TWPR or the ZIP file?
hey guys,i am using vibe k5 plus stock unrooted with build no A6020a46_S051_160805_ROW,i got update to A6020a46_S056_161019_16G_ROW_WCCE8A8E90.
when i update,it says carrier switch error,
i tried few steps like flashing INdia.ota.zip and also system.zip but same error is coming,i even tried with lenovo smart assistant,same error coming,can anyone help?
did anyone flash from S051 to S056 successfully?
Note:
In carrier configure,it shows only default{other countries dont show up}
Normally, you have to flash the <country>.ota.zip of your current ROM :
- either you reflash the S051 (with QFIL) and just after you flash via recovery the zip located in your internal memory in "/0/carrier/"
- or you flash the S056 (with QFIL) and you flash the same zip via recovery. The zip can also be in the folders of the ROM
Hello I was trying to flash a room via recovery and it seems I wiped everything now when I turn the phone on it stick on Huawei logo cant enter to the recovery mode or the boot menu I did some research through the internet I found a tool called (SP flash tools) I download it and i download the usb Huawei drivers the software need a scattered file so it can recover the phone and icant find any OTA rom for my Huawei ascend p1 that contain that scatter file all the official roms that I tried to download contain one file named APDATE.APP
So plz if anyone have download link for Huawei ascend p1 OTA room that contain the scatter file or if there is any other method that ican flash the bootloader or the recovery to my bricked phone plz help me and thanx for reading my problem
mansnrosess said:
Hello I was trying to flash a room via recovery and it seems I wiped everything now when I turn the phone on it stick on Huawei logo cant enter to the recovery mode or the boot menu I did some research through the internet I found a tool called (SP flash tools) I download it and i download the usb Huawei drivers the software need a scattered file so it can recover the phone and icant find any OTA rom for my Huawei ascend p1 that contain that scatter file all the official roms that I tried to download contain one file named APDATE.APP
So plz if anyone have download link for Huawei ascend p1 OTA room that contain the scatter file or if there is any other method that ican flash the bootloader or the recovery to my bricked phone plz help me and thanx for reading my problem
Click to expand...
Click to collapse
helow sir....same problem .....can u help me, can u send me a link contain the scatter file for Ascend P1
Hello everyone!
My realme x chinese version is bricked and now im in (Your current image(boot/recovery)have been destroyed and cannot boot)
Please notice these-
I tried to flash twrp but didnt work.
I have stock recovery but ozip file installation fails.(I tried with otg)
I tried realme flash tool but my storage is not showing.
Even i tried to flash boot,vbmeta,vendor,dtbo,recovery,system and everything flashed properly except system.img.
But now when i try this cmd command (fastboot -w) it shows
CreateProcess failed: The system cannot find the file specified. (2)
error: Cannot generate image for userdata.
now what can i do?
please help.
TIA
XyperOps said:
Hello everyone!
My realme x chinese version is bricked and now im in (Your current image(boot/recovery)have been destroyed and cannot boot)
Please notice these-
I tried to flash twrp but didnt work.
I have stock recovery but ozip file installation fails.(I tried with otg)
I tried realme flash tool but my storage is not showing.
Even i tried to flash boot,vbmeta,vendor,dtbo,recovery,system and everything flashed properly except system.img.
But now when i try this cmd command (fastboot -w) it shows
CreateProcess failed: The system cannot find the file specified. (2)
error: Cannot generate image for userdata.
now what can i do?
please help.
TIA
Click to expand...
Click to collapse
Did you got the solution? Please help me!!!!!!!
XyperOps said:
Hello everyone!
My realme x chinese version is bricked and now im in (Your current image(boot/recovery)have been destroyed and cannot boot)
Please notice these-
I tried to flash twrp but didnt work.
I have stock recovery but ozip file installation fails.(I tried with otg)
I tried realme flash tool but my storage is not showing.
Even i tried to flash boot,vbmeta,vendor,dtbo,recovery,system and everything flashed properly except system.img.
But now when i try this cmd command (fastboot -w) it shows
CreateProcess failed: The system cannot find the file specified. (2)
error: Cannot generate image for userdata.
now what can i do?
please help.
TIA
Click to expand...
Click to collapse
Hi,
I have the same problem.
Any chance you could share the method of how you managed to connect otg to transfer the ozip file? I also only have access to stock recovery and the fastboot mode.
I have the stock rom in zip file version which i am absolutely certain works because i have used it before but i can't install a custom recovery no matter what i try.
If possible could you also share the ozip file and the odp file?
Thank You!
I just wrote unbrick instruction here:
[GUIDE] [RMX1901] Unbrick & Install Android 13 Custom ROM
The guide is for a Chinese version of the phone. But might give you an idea for the global version. History: I was on the latest official ROM. But I was already unlocked the boot. Then I tried to install a custom ROM and failed. Because TWRP for...
forum.xda-developers.com
And you could find some information that I found from there.