Develop Bugs

[G800F][ROM][PAC-ROM][BETA]PAC-ROM 5 for Galaxy S5 Mini LTE edition

UPDATE 08/03/16
new build out eventually, have been a bit busy last couple days, new build is ready
changelog
Code:
Updated kernel Auditor to my latest custom version
DT2W active in kernel (not enabled y default)
cpu undervoltage works now and can be changed via kernel auditor
call recording enabled
fixed the frozen lockscreen issues (thanks to hennymcc for info on that)
bluetooth audio should work too
HW Video Accell fixed
few other little tweaks
the custom kernel auditor in this build has been modified to allow enabling dt2w and cpu voltage control
download link
http://www.dmpwap.xyz/roms/pac_kminilte_LP-MR1.Unofficial_20160306-110028.zip
----------------------------------------
UPDATE 24/02/16
Ok another new build,
http://www.dmpwap.xyz/roms/pac_kminilte_LP-MR1.Unofficial_20160224-170017.zip
changelog
Code:
fixed flashing zip
few minor tweaks
UPDATE 20/02/16
another fix - ill get this right eventually.
download link:
http://www.dmpwap.xyz/roms/pac_kminilte_LP-MR1.Unofficial_20160220-100535.zip
changelog
Code:
zip should be fixed now too
removed TWRP from the zip will be updating my twrp post with a zip to install that shortly
hopefully fixed call audio this time
Kernel is now built with Hyper-Linaro 5.1 GCC
Rom Now built Using Sabermod toolchain for performance
----------------------------------------------------------------
UPDATE 19/02/16
yet another update folks,
download link :
http://www.dmpwap.xyz/roms/pac_kminilte_LP-MR1.Unofficial_20160219-170840.zip
changelog:
Code:
Fixed Sensors Libraries so they work again - also added partial support for heart rate sensor
Fixed MTP so it works again
F2FS Support Included,
TWRP3 Recovery built in
Audio Finally Fixed Including Headset Switching.
again let me know of any bugs
known issues:
touch screen still has weird issues after sleep haven't managed to narrow it down yet
---------------------------------------------------------------
UPDATE 17/02/15
Ok lets try this again,
new build up,
http://www.dmpwap.xyz/roms/pac_kminilte_LP-MR1.Unofficial.zip
changelog
Code:
Fixed the Phone call sound and mic issues,
enabled F2FS support for /data and /cache partitions, system will auto mount those partitions as either ext4 or F2FS depending on their format - will have a fixed TWRP 3 out tomorrow with F2FS support
any bugs please let me know again folks.
you need to flash SuperSU after this rom to enable root - i have attached supersu zip to this post
-------------------------------------------------------------------------------------------------
UPDATE 14/02/15
new update out today folks
Changelog
Code:
Replaced the old crappy unstable kernel with a new build of my LP TardisKern with 1.7Ghz CPU OC etc.
Replaced a bunch of samsungs proprietary libs in the build to make sure it works with the new kernel
Replaced the Stock Camera app with Snap Camera from cyanogenmod
Removed google apps this time round :)
automatic brightness works but is not perfect yet (still working on it
you will need to grab supersu and install that after the build to get root going
link :
http://www.dmpwap.xyz/roms/pac_kminilte.zip
please advise of any issues again folks.
i have also uploaded my own device and proprietary tress for compiling with this new kernel
-----------------------------------------------------------------
hello folks.
sorry ive been very quiet the last week or so but ive been working hard on some new things (including that nice new lollipop kernel source for the G800F which is still In progress)
need to give a massive thanks to arkansawdave74 for helping with this and the build for the H model, and for helping give me the kick i needed to get back into android development proper.
but i have actually got some useful work to announce now
i am proud to announce the first BETA release of PAC-Rom for the Samsung galaxy S5 Mini LTE(G800F) (yes i have one for the dual sim H model aswell getting posted soon)
download links are below, and i will let others post screenshots etc as i dont currently have the time since im typing this late at night to get any.
PLEASE BE ADVISED THIS ROM IS FOR THE SM-G800F ONLY AND COULD CAUSE A BRICK IF FLASHED TO OTHER DEVICES
http://www.dmpwap.xyz/roms/pac_kminilte.zip
this is now using a fully up to date TardisKern with 1.7ghz oc amoungst other things.
please mention any bugs etc so i can get to work on them.
current issues noted:
selinux support is completely disabled
mtp(usb storage) may or may not work as my pc does not seem to want to play with any usb storage devices currently
working
phone,
messaging(mms/sms)
mobile data including LTE/4G
display and 3d graphics
remote control transmitter
google apps
wifi
GPS
sound
bluetooth
pretty sure everything else works too
any and all donations would be much appreciated to help cover hosting costs
XDA:DevDB Information
PAC-ROM 5 For Galaxy S5 Mini (SM-G800F), ROM for the Samsung Galaxy S5 Mini
Contributors
DJ_Steve, arkansawdave74, PAC-Rom team, Jackeagle & hennymcc for Device Trees
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: PAC-MAN Rom
Version Information
Status: Beta
Current Beta Version: 1.0
Beta Release Date: 2016-01-30
Created 2016-01-31
Last Updated 2016-03-08

Thanks you for this rom ?
Envoyé de mon SM-G800F en utilisant Tapatalk

Issues?
First thanks to you. but can you rewrite the mainpage and write exactly what works and what not? That would be very helpful

raffejos said:
First thanks to you. but can you rewrite the mainpage and write exactly what works and what not? That would be very helpful
Click to expand...
Click to collapse
updated the main post, but most things seem to work

No root access !
I have the settings on Apps and ADB.
But apps dont have root access.
I am going back to CM 13 !!!

another343 said:
I have the settings on Apps and ADB.
But apps dont have root access.
I am going back to CM 13 !!!
Click to expand...
Click to collapse
Have you installed SuperSU from play store.. Root works fine for others
Sent from my SM-G800F using Tapatalk

Got it !
I used the rooting tool : KingRoot.
That fixed it.
But the system setting still doesnt work.
Also I dont like the camera app.
The CM Snap app is better

the setting worked fine here and still does so im thinking thats something on your end, as for camera i cant comment as ive used cm for about 5 mins and that will be all i ever use it for, cm is far too bloated in my personal opinion and actually seems to perform slower than touchwiz for me, and what rom people choose to use is always personal preference in my opinion
another343 said:
I used the rooting tool : KingRoot.
That fixed it.
But the system setting still doesnt work.
Also I dont like the camera app.
The CM Snap app is better
Click to expand...
Click to collapse

Got it !
I used the rooting tool : KingRoot.
That fixed it.
But the system setting still doesnt work.
Also I dont like the camera app.
The CM Snap app is better

Another Problem !
DJ_Steve said:
the setting worked fine here and still does so im thinking thats something on your end, as for camera i cant comment as ive used cm for about 5 mins and that will be all i ever use it for, cm is far too bloated in my personal opinion and actually seems to perform slower than touchwiz for me, and what rom people choose to use is always personal preference in my opinion
Click to expand...
Click to collapse
Google play refuses to install apps with error: 963 and 924.
I tried costum gApps but still nothingBut it works on other ROMs.
Please Fix.

another343 said:
Google play refuses to install apps with error: 963 and 924.
I tried costum gApps but still nothingBut it works on other ROMs.
Please Fix.
Click to expand...
Click to collapse
Strange how your having problems as im using the same exact build and play store works fine here. Have you tried a wipe
Sent from my SM-G800F using Tapatalk

DJ_Steve said:
the setting worked fine here and still does so im thinking thats something on your end, as for camera i cant comment as ive used cm for about 5 mins and that will be all i ever use it for, cm is far too bloated in my personal opinion and actually seems to perform slower than touchwiz for me, and what rom people choose to use is always personal preference in my opinion
Click to expand...
Click to collapse
Root make over Odin , add a file attached to pda or ap and restart the unit . in my work .

Root work fine you need just turn root on in dewelopers
Options in setings like in cm12.1

Bloatware !!!!
Can you remove all the gApps like Fit,Movies Play ....
Please I wanna install gApps like Open Gapps Pico.
And if you are gonna do it, please dont remove the launcher.
Bye m8

another343 said:
Google play refuses to install apps with error: 963 and 924.
I tried costum gApps but still nothingBut it works on other ROMs.
Please Fix.
Click to expand...
Click to collapse
same to me please fix it i very like this super fast ROM !!! thx

liborhabrnal said:
same to me please fix it i very like this super fast ROM !!! thx
Click to expand...
Click to collapse
already planning to fix that - didnt mean to leave the gapps in in the first place just forgot to remove them after testing myself

Please remove the gapps so everyone can choose the gapps fron opengapps oder somewhere else. Althoug Please use another launcher so not the Google now launcher for example trebuchet from cyanogenmod. The features are the best but i cant use it daily because gapps:cyclops:
Your work is awesome and a progress in custom Roms for the nice s5 mini:good::good:

raffejos said:
Please remove the gapps so everyone can choose the gapps fron opengapps oder somewhere else. Althoug Please use another launcher so not the Google now launcher for example trebuchet from cyanogenmod
Click to expand...
Click to collapse
try to be polite, as that comes across as quite nasty in some ways(though i understand english may not be your natural language so quite possibly is not your fault), ill be fixing that issue once i get my build system back up and running which it is not currently

Deleted

link should be back now
and i wont use drive etc after previous big issues with them years ago
(and why would i pay for android file host when i have my own server)

Paranoid Android 6.0.3 - Geehrc (discontinued)

disclaimer :THIS IS UNOFFICIAL PORT
We are launching brand spanking fresh. All new features. New team members. New everything and we have made sure that everything that we are releasing has been polished to our best.
The main features and enhancements that you will probably end up noticing are our custom Quick Settings tile reordering functionality, floating window support, immersive mode, the new on-the-spot interface and CM Theme Engine. There's much more to come, so sit tight!
Feature highlights
Floating mode
Immersive mode
On-the-spot controls
Quick settings re-order
Paranoid OTA (Updates)
Battery styles
Advanced power dialog
Quick pull-down
Theme engine
BUGS:NFC (i hope fix it in few days)
First Boot Time may 10 minute
Download
AOSPA
Changelogs
As we're getting back into the thread game, keeping up with threads and updating them as per changelogs can be too hectic given our schedule. However, very detailed changelogs always go up on our Google+ page, follow us for constant updates!
Instructions & requirements
We highly recommend you to follow these instructions very carefully. Users usually tend to skip a few steps and eventually fall in trouble. Are you with me? Good. Let's get this train going.
Just a few things to keep in mind first -
If you're coming from another ROM / Stock, your system data (not internal storage) will have to be wiped. This includes apps, accounts, messages, call logs etc.
There's been some users complaining about different GAPPS variants messing up installs and causing a ton of issues. Upon investigating it seems OpenGapps Mini/Nano and Banks GAPPS work best.
Understand that Paranoid Android is a custom ROM and it might lead to addiction as it's relatively good. We shouldn't be accused of anything just incase your cat starts drinking wine. Things get a little woozy in the Paranoid World.
Some brain might be involved if things go wrong. Not a lot though, as much to solve what's 1+1.
Okay let's get to the main bit -
Once you have all the required files - boot into recovery and wipe the bananas out of your device. Get into the wipe menu and wipe data, system, cache and dalvik cache (basically everything except Internal Storage).
Once wiped, get into the "Install from zip" menu and select the ROM zip. (pa_bacon_6.x...). Once added to the install queue, TWRP will ask you if you want to add more zips into the queue - Click on "add more zips" and select the GAPPS package.
Swipe the bar on the bottom to flash/install zips. Once both zips are done installing - Reboot into system and set-up your device, do not do anything else.
Once you're done setting up your device - well that's when you're done. One thing though - Make sure you DO NOT INSTALL any other zip in the same queue as the ROM & GAPPS. Meaning, do not flash anything like a kernel or a root package while installing the ROM. We recommend you do that AFTER you're done setting up your device.
Important / Useful links
GAPS
SuperSu
As always, we listen to what you have to say. Help us make PA better by submitting good bug reports possibly with a log attached. Learn how to take logs HERE. Submit bug reports and we'll try to iron out issues as soon as possible - it really helps a lot.
Cheers and #StayParanoid!
Device Source :device-kernel-vendor
Special Thanks
@xboxfanj HE IS REALY PERFECT MAN. THX FOR EVERYTHING
@Kevinjoa
XDA:DevDB Information
Paranoid Android 6.0.3 - Geehrc (discontinued), ROM for the LG Optimus G
Contributors
metrixx02
Source Code: https://github.com/AOSPA
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: AOSPA
Version Information
Status: Beta
Beta Release Date: 2016-07-31
Created 2016-07-30
Last Updated 2016-10-28

Screenshots
Screenshots

Reserved

cool, i will become an official tester of this ROM and will shall present bugs, errors and i will sending Logcats. Sorry for my bad english.✌

OK first, when you record a note voice, audio heard saturated. second: when you open often the camera and you spend to other applications can get a time when no longer opens and need to restart the phone. third: the ROM should bring a file manager by default

Ronaldj25 said:
OK first, when you record a note voice, audio heard saturated. second: when you open often the camera and you spend to other applications can get a time when no longer opens and need to restart the phone. third: the ROM should bring a file manager by default
Click to expand...
Click to collapse
i m looking some small fixes i hope looking next time ur issues could u send me log ?

Could you say is that rom have wakelock problem too ?

JacubSKY said:
Could you say is that rom have wakelock problem too ?
Click to expand...
Click to collapse
yea i know have small wakelock issues but amplify solve it

PA 6.0.1 Review
First: Thank you for your work :good:. First I tried the Kevinjoa CM 13, but it has a lot of soft reboots, so I moved here.
1) Installation: Before you beginn, you need TWRP (for e975), which you have to install via ADB (USB + PC) ask Dr. Google about that. Additional to PA you need GAPPs (I choose mini-Version) and it is useful to have chainfires SuperSU.zip (UPDATE-SuperSU-v2.76-20160630161323.zip). All 3 zips can be installed via twrp.
2) Limitations:
I use PA-Version pa_geehrc-6.0.1-20160730 since Aug 10th (2016). I don't have any reboots or something. Everything ist running smothly.
What is working:
- Wifi
- Mobile Data
- Camera
- Phone
- Bluetooth
- GPS
What is NOT working:
- NFC (there seems to be no option to activate it) I love NFC!
- IPv6 **
- Bluetooth sometimes has trouble to connect (Garmin forerunner + Pioneer headset)
- Mobile Data (HSDPA): Whatsapp + Mail is not working, while signal messenger and Chrome are working
** I had to disable IPv6 with "IPv6 Disable Tool", otherwise I encountered problems with mail, etc. I have native IPv6 for internet and the ipv6-stack seems to be the problem: "Socket timeout: failed to connect to server". Update: This is related to my mailprovider (hosteurope.de), which has a workaround.
The version seems to be battery draining, my phone was empty after less than 12 hrs. I will look to the reason.
OK guys, I will continue on this post.
Regards
Garmintroll
Update: I moved to resurrection remix, because oft Bluetooth and mobile data trouble.

garmintroll said:
First: Thank you for your work :good:. First I tried the Kevinjoa CM 13, but it has a lot of soft reboots, so I moved here.
1) Installation: Before you beginn, you need TWRP (for e975), which you have to install via ADB (USB + PC) ask Dr. Google about that. Additional to PA you need GAPPs (I choose mini-Version) and it is useful to have chainfires SuperSU.zip (UPDATE-SuperSU-v2.76-20160630161323.zip). All 3 zips can be installed via twrp.
2) Limitations:
I use PA-Version pa_geehrc-6.0.1-20160730 since Aug 10th (2016). I don't have any reboots or something. Everything ist running smothly.
What is working:
- Wifi
- Mobile Data
- Camera
- Phone
- Bluetooth
- GPS
What is NOT working:
- NFC (there seems to be no option to activate it) I love NFC!
- IPv6 **
** I had to disable IPv6 with "IPv6 Disable Tool", otherwise I encountered problems with mail, etc. I have native IPv6 for internet and the ipv6-stack seems to be the problem: "Socket timeout: failed to connect to server".
The version seems to be battery draining, my phone was empty after less than 12 hrs. I will look to the reason.
OK guys, I will continue on this post.
Regards
Garmintroll
Click to expand...
Click to collapse
Thx ur commends .i know that bugs first i will said that battery issue is wakelock problem if could u flash Xposed u will use Amplify and solve this problem but absolutely I look at this problem first chance .I know u are not alone .NFC is really problem.i did Smal compiles from NFC but can't solve .I don't know what is the problem exactly but I contact my friend I hope fix it soon .ipv6 issue is device source problem i could not anything now.when I solve NFC and wakelock issue I will interest it .but not have any idea this problem.i m interesting AICP usually.but when I have free time I look .
I don't understand what do you mean ur 1. Comment but it is help for u.
I m useng twrp geehrc version 3.0 if u want I can upload it .every time I did full wipe and flash ROM+open gaps aroma +SuperSU (any version)+xposed+viper4ndroid .and not have any problem
But if u want use adb it is not problem can u do my steps but I don't recommend windows adb I use everytime Linux terminal and adb .so u can't usr aroma installer in adb but I hope open gaps stock is solve ur problem.
I did not upload last build s .I m really sorry basketbuild is going maintances .i bought yesterday one host and domain I m planning use h5ai system and upload my works to domain adres .when I will do this share it .
this work my hobby.i m interesting free times .i did not fallow this forum everyday because i m working robotic hands Project but if u want contact me using hangouts i hope help for u quickly than forum

pa 6.0.3 is up

How to enable hardware key backlight? Is there any option in the settings to configure it?

Working great on an old Sprint LG LS970 - thanks!
Question: Sprint/Ting 4G works, Sprint/Tello data does not work. Have attempted various APN editing tricks, but no dice. Any suggestions?

NFC
metrixx02 said:
pa 6.0.3 is up
Click to expand...
Click to collapse
Any news about NFC?

tdurack said:
Working great on an old Sprint LG LS970 - thanks!
Question: Sprint/Ting 4G works, Sprint/Tello data does not work. Have attempted various APN editing tricks, but no dice. Any suggestions?
Click to expand...
Click to collapse
Tello activate your phone as a modem APN works for me:
user ID: [email protected]
APN: mi.pamsn

CM 14.1 - android 7.1 - Unofficial - for LeTV X800+ CN

First: I am not a developer but I like to cook so I thought to share with you the modified version by me for Le 1 Pro/Le Max CN cyanogenmod14 7.1 ROM find on LeEco.Re by RoyalCasin (THANK YOU FOR SHARING!)
The ROM is tested on CN version but maybe it works also on US version because it not contain any modem/radio or other additional parts for other partition then system and boot. TRY IT ON YOUR OWN RISK!...but share with us your experience to get thinks better.
It has some htc flavor: contains Blenkfeed ant trebouchet.
CREDITS:
1. Pan Youjie (screen name Flour Mo) - for developing and sharing the base CM14.1 ROM for LeTV 800+ - BIG THANKS!
2. RoyalCasino - to share the base ROM on LeEco.re,
3. CM 14.1 community (now LineageOS community), especially Oneplus2 CM14.1/LineageOS from where I get some inspirations and files,
4. All XDA community who makes this sharing be possible and enjoy a lot of peoples with community work.
THANK YOU ALL!
Install in TWRP
1. Delete cashe, system, dalvick, data
2. Instal ROM
3. delete cashe and dalvick
4. let device to boot up...first boot can take up to 5-6 min!.
5. Enjoy!
Bugs:
1. Bluetooth not work - solved in ian.03.2017 update - link below
2. Camera sometimes work sometimes not. BUT OPEN CAMERA WORK!!!!
3. Some large vidget (like clock-wether widget from htc - can be selected just if you are in smalest descktop size.
After you positioned you can come back to default descktop size - but not greater.
4. And a few more maybe....
DOWNOAD:
http://www.mediafire.com/file/jsc5q4w6pe4j5om/CM14_NOUGAT711_ABM30_31dec2016-OPONEW-10.zip
UPDATE on 2017ian03: Bluetooth WORK!
http://www.mediafire.com/file/45w0xqpuljljy8t/CM14_NOUGAT711_ABM30_03.ian.2016-BT.zip
UPDATE on 2017ian06:
- no htc stuff
- Cianogenmod SNAP camera changed with google camera (open camera remain)
- improved GPS
http://www.mediafire.com/file/a1m3jagwj7vn11k/X800_CM141_ABM30_6ian2017-nohtc.zip
UPDATE on 2017ian12:
- updated to LineageOS - ported from Oneplus 2-vers. from 11ian2017
- added asserts for X900 - I hope it boot up also on Max1! - need to be cheked
- added fingerprint for X900 - need to be cheked if it works
- snap camera still in for testing purposes.
[URL=http://www.mediafire.com/view/tgz2r7xi1473g1m/Fingerprint.jpg]
[/URL]
link below
http://www.mediafire.com/file/t2pzgxzz2gnoqte/X800_LinOS711_12ian17-07.zip
INSTALLING NOTE!
Skip the wifi connection and phone connection to avoid introducing account during setup. it can stuck on setup!
In case go back and forget any wifi connected...
16IAN2017 - PATCH for data signal not comming back after closing WIFI:
http://www.mediafire.com/file/9artd21a5avpble/Le_1_Pro_WCNSS_cfg.zip
INSTALLING: Go in TWRP, wipe cache and Dalvik/ART, install Le 1 Pro WCNSS_cfg.zip, wipe again cache and Dalvik/art > REBOOT.
I will include the patch in next update.
UPDATE on 2017ian18
Details in post 94/pg 10
link:
Mega.nz link https://mega.nz/#!RgUiCKLD!Yb5ISccbs4a0D66rC3wOyGSa6rMld5zgsMpEdPj1Mkk
Mediafire link: http://www.mediafire.com/file/cq0v5a4gff4c8vl/X800_Lineage_mod_18ian17-008.zip
Update on 2017feb04:
Mega: https://mega.nz/#!Yg1h0AZS!CaIKey9-TPS1FbnqsXZpmxqfSXSyhVY8dtzMDmRKr6g
Mediafire: http://www.mediafire.com/file/wa5zdimckm5kg1o/X800_LOS141_04-feb17-04.zip
- Live display works, all options, including color calibration
- AudioFX changed with Dolby
- LineageOS updated from ported OnePLUS2
- some improvement on phone connectivity
Still not working: wifi tethering and screen cast and IR Blaster
NEW Update on 2017aug14:
!!!!!!-New build ported from Oneplus 2: Resurection Remix 5.8.4.[7.1.2] by nicesoni_ash - THANK YOU nicesoni_ash!-!!!!!!
- It has no GAPPS in, so if you need install OPEN GAPPS NANO, last version, right after ROM FLASH!
- ROM is not rooted! You can install Magisk 13.3 if you think.
http://www.mediafire.com/file/ftkgonoyfoi3fg5/X800_RR584_CN_14aug17_ABM30-09W.zip
--- bugs ---
1 - Tethering not working (without a new kernel it won't I think)
2 - IR blaster is starting after 3 atempts but is not working.
3 - for flash to synchronize: in open camera settings enable the USE CAMERA 2 API and in Photo settings enable USE ALTERNATIVE FLASH METHOD.
NEW Update on 2017sep09:
1- Kernel is compiled from Pan Youjie (Flour_Mo - THANK YOU AGAIN!) source code, based on original 26s kernel config with some improvements, rpfilter activated for tethering to work.
2- WIFI MODULE WAS RECOMPILED FROM SOURCE
3- Rom based on RR584 ported from OnePlus 2 by nicesoni_ash.
4-tethering is working!
CN X800 Android 7.1.2 VARIANT ONLY!
http://www.mediafire.com/file/5t3i3n33e52mo51/X800_RR584_wlan_ABM30_9-sep17-04.zip
US Android 7.1.2 VARIANT ONLY (TESTING on your risck!)
http://www.mediafire.com/file/g5jrdvgcs377ew0/X800_RR584_US_wlan_ABM30_9sep17-01.zip
2and try:
http://www.mediafire.com/file/6btfaw93he4a2ia/X800_RR584_US_wlan_ABM30_9sep17-02mod.zip
Bugs: Ir Blaster not working (the files are there but is not working). Here are more info ,maybe we will find a solution together: https://forum.xda-developers.com/le-pro3/development/mod-make-infrared-blaster-3rd-party-t3511572
NEWS on 2017sep13:
MAX1 Android 7.1.2 TEST (I don't own the phone, so is not tested (TESTING on your risck!)
http://www.mediafire.com/file/gqzxzi9yf8l810k/X900_RR584-abm30_13sep17-01.zip
NEWS on 2017sep15:
New X800+ ROM with IR BLASTER WORKING!!!!!!!!
remouved on 19sep17: BT not work!
UPDATED BELOW!
Update on 2017sep19:
http://www.mediafire.com/file/r3zd31iwmaowaya/X800_CN_RR584_IR_BT-GPS-abm30_19sep17-03mod.zip
- BT, IR blaster is working now
- GPS: added config from Credomo (THANK YOU!) but need to be tested. Look for: https://forum.xda-developers.com/showpost.php?p=73849995&postcount=432
- I hope everithing else (snap camera has some FC but Open camera works)
Update on 2017oct02:
- updated to Ressurection Remix 585 with theme support!
-updated GPS also, a bit better in outside, not necessary in indoor, but lets test it a bit longer.
https://www.mediafire.com/file/9qrimxn55xprkae/X800_RR585_CN_abm30_01oct17-02LiblocOP2.zip
Update on 2017oct04:
US TEST VARIANT - DO NOT TRY ON CN MODEL!
TEST IT ON YOUR OWN RISK...BACKUP FIRST!
http://www.mediafire.com/file/wws1dc9vfyl63st/X800_US_RR584-04oct17-01.zip
Update on 2017oct08:
http://www.mediafire.com/file/ovy3k7dgj0mqzgy/X800_RR585_CN_abm30_08oct17-01gyro.zip
-Updated RR585 to oct 07 version
-Gyro config changed with new one. i hope now is working good. (not tested because I don't own VR glases)
Update on 2017nov11:
https://www.mediafire.com/file/6csmiz8zh6vwxf7/X800_CN_RR585CLEAN_11NOV17-02.zip
-Updated RR585 to oct 18 version (maybe last version before OREO! - because OnePLUS 2 version -from where I am porting - has stopped at oct18 version!)
-cleaned up sound, Dolby taken out, solved in call volume changing.
-For Dolby I put a separate DOLBY ATMOS zip here: https://www.mediafire.com/file/l5oawi6d2z7czhb/dolby.zip that can be installed via TWRP as usual.
After install allways wipe cache and Dalvik!
Screen shoots:
MAX_1 ROMs:
http://www.mediafire.com/folder/8q0kf8apyxh85/MAX1"]http://www.mediafire.com/folder/8q0kf8apyxh85/MAX1"]http://www.mediafire.com/folder/8q0kf8apyxh85/MAX1
If you like my work you can donate me a coffee.
Thank you!

Has anyone tried this on the US version?

attitude12 said:
Has anyone tried this on the US version?
Click to expand...
Click to collapse
The American version can also be brushed into this ROM.
---------- Post added at 03:25 PM ---------- Previous post was at 03:22 PM ----------
I am a friend of the ROM developer, his name is Pan Youjie (screen name Flour Mo). How did you find this ROM? Please tell me, thank you.
---------- Post added at 03:27 PM ---------- Previous post was at 03:25 PM ----------
ABM30 said:
First: I am not a developer but I like to cook so I thought to share with you the modified version by me for Le 1 Pro/Le Max CN cyanogenmod14 7.1 ROM find on LeEco.Re by RoyalCasin (THANK YOU FOR SHARING!)
The ROM is tested on CN version but maybe it works also on US version because it not contain any modem/radio or other additional parts for other partition then system and boot. TRY IT ON YOUR OWN RISK!...but share with us your experience to get thinks better.
It has some htc flavor: contains Blenkfeed ant trebouchet.
Install in TWRP (I use 3.0.2)
1. Delete cashe, system, dalvick, data
2. Instal ROM
3. delete cashe and dalvick
4. let device to boot up...first boot can take up to 5-6 min!.
5. Enjoy!
Bugs:
1. Bluetooth not work
2. Camera sometimes work sometimes not. BUT OPEN CAMERA WORK!!!!
3. Some large vidget (like clock-wether widget from htc - can be selected just if you are in smalest descktop size.
After you positioned you can come back to default descktop size - but not greater.
4. And a few more maybe....
DOWNOAD:
http://www.mediafire.com/file/jsc5q4w6pe4j5om/CM14_NOUGAT711_ABM30_31dec2016-OPONEW-10.zip
Screen shoots:
Click to expand...
Click to collapse
I am a friend of the ROM developer, his name is Pan Youjie (screen name Flour Mo). How did you find this ROM? Please tell me, thank you.

266APP said:
The American version can also be brushed into this ROM.
---------- Post added at 03:25 PM ---------- Previous post was at 03:22 PM ----------
I am a friend of the ROM developer, his name is Pan Youjie (screen name Flour Mo). How did you find this ROM? Please tell me, thank you.
---------- Post added at 03:27 PM ---------- Previous post was at 03:25 PM ----------
I am a friend of the ROM developer, his name is Pan Youjie (screen name Flour Mo). How did you find this ROM? Please tell me, thank you.
Click to expand...
Click to collapse
First I need to thank then to you and your friend Pan Youjie for ROM, I find it on LeEco.re forum. I added a bit htc sense flavor, open camera, and take out the additional mbn files to try to make the rom compatible with US version to. I try to find working files for Bluetooth also but till now without success. (I have limited development skills, maybe your friend can Pan Youjie help us to solve also the Bluetooth issue?)
Thank you again and hope is not a problem that I modified the ROM, I give the credit to developers. Together we can do things better.
P.S. It seems that the ROM is working on US version then?!

266APP said:
The American version can also be brushed into this ROM.
---------- Post added at 03:25 PM ---------- Previous post was at 03:22 PM ----------
I am a friend of the ROM developer, his name is Pan Youjie (screen name Flour Mo). How did you find this ROM? Please tell me, thank you.
---------- Post added at 03:27 PM ---------- Previous post was at 03:25 PM ----------
I am a friend of the ROM developer, his name is Pan Youjie (screen name Flour Mo). How did you find this ROM? Please tell me, thank you.
Click to expand...
Click to collapse
OT: about the ROM, I have found it on a Chinese forum, and I shared it on leeco.re giving credits to the developer( flour mo, since his cyano ROMs was already shared there). If this may cause problems to the developer, sorry about that. ( just tell me and I will remove it).
My only intent was to improve the great job done by the developer sharing it to people who own this phone.

Has anyone tried on US version? I have US version, but I'm afraid to try because I screwd up old phone...

MasterChief2 said:
Has anyone tried on US version? I have US version, but I'm afraid to try because I screwd up old phone...
Click to expand...
Click to collapse
Doesn't work ! I deleted the mbn files and flashed the ROM. After flashing it will go into the fastboot mode.
Played also with X800 US kernels...
When you replace the Kernel with some X800 US kernels like Aurel or CrisBal (obviously not 7.1.1 versions) it will bootloop which is normal as the kernel didn't match.
So the main problem persist anyway, we need a correct Kernel for our X800 US Version !

I want to get this rom on my US version. Is there some developer that can do it for us? I am ready to do some donations if we get stable firmware. I think other phone owners can do it as well.

BetaHydri said:
Doesn't work ! I deleted the mbn files and flashed the ROM. After flashing it will go into the fastboot mode.
Played also with X800 US kernels...
When you replace the Kernel with some X800 US kernels like Aurel or CrisBal (obviously not 7.1.1 versions) it will bootloop which is normal as the kernel didn't match.
So the main problem persist anyway, we need a correct Kernel for our X800 US Version !
Click to expand...
Click to collapse
Glad to see you here BetaHydri, all respect to you. Have you tried to change also the firmware folder from etc with the one from US model (maybe also Bluetooth and wifi also). Also in lib/lib64 folder to change the hw and modules folder with one from US model?
But that is true, if the kernel doesn't match it wont boot. And, unfortunately I am not skilled enough (yet) for kernel building.
Maybe we can ask Pan Youjie ( Flour Mo) -who is the bulder of CM 14.1.1 kernel for CN version-to help us in building a kernel also for US model. After that the work is much easier.
Unfortunately I don't have any LeEco 1 PRO US model around to try/work on.

QCN Backup when playing with CM14.1 + kernels on X800 US
ABM30 said:
Glad to see you here BetaHydri, all respect to you. Have you tried to change also the firmware folder from etc with the one from US model (maybe also Bluetooth and wifi also). Also in lib/lib64 folder to change the hw and modules folder with one from US model?
But that is true, if the kernel doesn't match it wont boot. And, unfortunately I am not skilled enough (yet) for kernel building.
Maybe we can ask Pan Youjie ( Flour Mo) -who is the bulder of CM 14.1.1 kernel for CN version-to help us in building a kernel also for US model. After that the work is much easier.
Unfortunately I don't have any LeEco 1 PRO US model around to try/work on.
Click to expand...
Click to collapse
And Important Infos BTW: When some others are having in mind to play around with CM14.1 + foreign kernels:
- My above tests killed my IMIE and QCN Config.
- So important: backup your own QCN file:
--> Switch X800 US into ADB Diagnostic Mode - how:
1. adb shell
2. su
3. setprop sys.usb.config diag,adb
4. A new Qualcomm USB COM Diag Device should apear ( you have to install first the Qualcomm Drivers )
5. Open Qfil 2.7.429 or 2.7.430, Choose the Serial Qualcomm COM port from 4.
6. Click in QFIL on menu Tools and choose QCN Backup Restore
7. Make a backup from your QCN File, dont't forget to check mark Enable Multi-SIM before backup !
Cheers BetaHydri !

After installed the fixed BT version ROM, neither the Open Camera App nor the stock camera app works. I also try other camera apps from playstore, however, none of them works.

borg79 said:
After installed the fixed BT version ROM, neither the Open Camera App nor the stock camera app works. I also try other camera apps from playstore, however, none of them works.
Click to expand...
Click to collapse
Have you made a wipe cache/Dalvik before installing new version? Try to make also now a wipe cache/wipe Dalvik and restart.
Else make a clean reinstall (always is safer!), the camera should work. (The open camera, the other one not always)
BTW, in next revision I take out CM camera and put Google Nexus 6P which it works and also working on LineageOS (former CM) nougat 7.1.1
Some work to do on wifi, still, maybe next week I come with new revision.

Anyone have a version of this for CN without HTC stuff but has Bluetooth working?

ABM30 said:
Have you made a wipe cache/Dalvik before installing new version? Try to make also now a wipe cache/wipe Dalvik and restart.
Else make a clean reinstall (always is safer!), the camera should work. (The open camera, the other one not always)
BTW, in next revision I take out CM camera and put Google Nexus 6P which it works and also working on LineageOS (former CM) nougat 7.1.1
Some work to do on wifi, still, maybe next week I come with new revision.
Click to expand...
Click to collapse
I do perform double wipe and clean install, but there is no luck with the camera app, the screen just black out !

thejodster said:
Anyone have a version of this for CN without HTC stuff but has Bluetooth working?
Click to expand...
Click to collapse
I will do one in the next days. ....
LINK ON FIRST PAGE!

ABM30 said:
Glad to see you here BetaHydri, all respect to you. Have you tried to change also the firmware folder from etc with the one from US model (maybe also Bluetooth and wifi also). Also in lib/lib64 folder to change the hw and modules folder with one from US model?
But that is true, if the kernel doesn't match it wont boot. And, unfortunately I am not skilled enough (yet) for kernel building.
Maybe we can ask Pan Youjie ( Flour Mo) -who is the bulder of CM 14.1.1 kernel for CN version-to help us in building a kernel also for US model. After that the work is much easier.
Unfortunately I don't have any LeEco 1 PRO US model around to try/work on.
Click to expand...
Click to collapse
I'm glad you shared this ROM with XDA, and the developer himself agreed. We are all from China, so English is not very good, please forgive me. Are you willing to donate to developers to fix BUG faster? Such as camera. Voluntary, of course. We have opened the CM14.1 kernel source code, and we hope to develop together, such as BetaHydri, or more developers.
Kernel source:https://github.com/Silentlys/android_kernel_letv_msm8994
@BetaHydri
---------- Post added at 01:25 PM ---------- Previous post was at 01:11 PM ----------
BetaHydri said:
And Important Infos BTW: When some others are having in mind to play around with CM14.1 + foreign kernels:
- My above tests killed my IMIE and QCN Config.
- So important: backup your own QCN file:
--> Switch X800 US into ADB Diagnostic Mode - how:
1. adb shell
2. su
3. setprop sys.usb.config diag,adb
4. A new Qualcomm USB COM Diag Device should apear ( you have to install first the Qualcomm Drivers )
5. Open Qfil 2.7.429 or 2.7.430, Choose the Serial Qualcomm COM port from 4.
6. Click in QFIL on menu Tools and choose QCN Backup Restore
7. Make a backup from your QCN File, dont't forget to check mark Enable Multi-SIM before backup !
Cheers BetaHydri !
Click to expand...
Click to collapse
Nice to meet you, BetaHydri. I admire you very much, thank you for the development of a good CM12.1. I am a friend of the CM14.1 developer, we are all from China, my English may not be great, please understand. We have to open the LE1 PRO CM14.1 kernel source code, hope you can also join in development as soon as possible, repair the camera does not work, we believe that you have this ability, I also hope you join CPU/GPU overclocking and do some kernel optimization. Thank you very much。
Kernel source:https://github.com/Silentlys/android_kernel_letv_msm8994

ABM30 said:
Have you made a wipe cache/Dalvik before installing new version? Try to make also now a wipe cache/wipe Dalvik and restart.
Else make a clean reinstall (always is safer!), the camera should work. (The open camera, the other one not always)
BTW, in next revision I take out CM camera and put Google Nexus 6P which it works and also working on LineageOS (former CM) nougat 7.1.1
Some work to do on wifi, still, maybe next week I come with new revision.
Click to expand...
Click to collapse
I just download your latest version and perform a clean install, the result is same as before, the camera apps doesn't work, showing just a blank screen. My phone is the LeEco Max and not the LeEco 1 Pro, I just modified the file "updater-script" and install it. I attach a log file for your reference.

borg79 said:
I just download your latest version and perform a clean install, the result is same as before, the camera apps doesn't work, showing just a blank screen. My phone is the LeEco Max and not the LeEco 1 Pro, I just modified the file "updater-script" and install it. I attach a log file for your reference.
Click to expand...
Click to collapse
Now I understood, because Max has another hardware (camera is different) some files changes/additions need to be made in the rom. I will try to make the changes necessary (also adding the fingerprint files needed for MAX), but I need your help in testing because I don't have the phone and maybe I will not succeed from the first try. I will give you a replay when I have a first variant for trying out.
Any way, good to hear that the rom boot up, the kernel is matching then.
In a day or two I'll be back!

Hi @ABM30
First of all, thank you for your effort.
I also managed to successfully flash the ROM on my Le Max x900+ after i delete the #Assert line from the "updater-script". I am glad that we have the perspective for a fully working CM 14.1.
Indeed, the Camera does not work on x900. There is also no Fingerprint, IR Blaster and NFC, but that's not a big deal for the latest two options for now. Fingerprint would be nice to have though.
I would also gladly be your tester for x900+ you have the time to develop the ROM further.
Thank you again. Best regards

Sirrr said:
Hi @ABM30
First of all, thank you for your effort.
I also managed to successfully flash the ROM on my Le Max x900+ after i delete the #Assert line from the "updater-script". I am glad that we have the perspective for a fully working CM 14.1.
Indeed, the Camera does not work on x900. There is also no Fingerprint, IR Blaster and NFC, but that's not a big deal for the latest two options for now. Fingerprint would be nice to have though.
I would also gladly be your tester for x900+ you have the time to develop the ROM further.
Thank you again. Best regards
Click to expand...
Click to collapse
OK, then the first attempt (TRY IT ON YOUR OWN RISK! on X800 wont finalize the boot proces, it stuck on Cianogen boot!):
http://www.mediafire.com/file/huzduh1592esfft/X900_CM141mod_8ian17-01.zip
It has the assert for X900 so you don't need to delete anything.
If the boot is successful then try out and tell me how it works. Thanks!
Any logcat will be useful.

[ROM][ALPHA] Unofficial Lineageos15.1

LINEAGE OS
This is an Alpha build of lineageos15.1
Working:
-RIL
-Bluetooth
-Camera (at least 1 of them)
Not Working:
-Probably selinux (did not try enforcing kernel yet)
-Probably encryption (logcat says it works...)
-Wlan (maybe bcs some files from vendor/vendor_system in /system are missing)
-2nd camera (fix could be to use micamera app)
-Probably more
Instructions:
-Download V9.6.11.0.ODLMIFF_8.1 original rom
-go to V9.6.11.0.ODLMIFF/images
-Replace boot.img, with boot.img
-Replace system.img and system_other.img with system.img
-use the flash_all script. THIS WILL WIPE ALL YOUR DATA, EVERYTHING! if you want to go back now (or later) just put the original images back again and use flash_all_except_storage
-Directly after the device reboots by itself, press vol up + power (u might have to hold it until device reboots again) to enter los recovery
-"factory reset--> wipe data"
-If you want TWRP "advanced-->reboot bootloader" and flash TWRP accordingly to thread, then u can flash gapps/mods.
-reboot
-give it time to boot
Source:
ROM
Device branch "los15"
msm8953-device
Kernel
To finish, I WON'T CONTINUE THIS ROM the trees are working, P vendor is there, an adaption to los16 should be possible based on that. Also, i prefer OMNIROM (which i will try to build next).
Thanks goes to:
-Google for the search engine as well as for the source code
-Cozzmi13 for taking some time to show me the basics.
-Lineageos
-Github
-ada12 for offering his help

thankssss

im wait until wlan fix, but thanks for your effort

CreateYourDream said:
im wait until wlan fix, but thanks for your effort
Click to expand...
Click to collapse
I NEED TESTERS
I am building omni now, so cant go back to los and test but if someone can test i might be able to fix it.
TEST:
-download attached zip
-open on pc or device
-copy the files to the corresponding folder (the folder they are in) in "/system" with a root file manager or adb. CAREFUL do not overwrite files already existing. PLEASE only copy the things in etc (especially etc/firmware/wlan/prima/WCNSS_cfg.dat) first, reboot, check if working, if doesnt work, copy other things.
-set permissions accordingly to other files in same folder
-reboot and check if wifi works

It would be nice to have logs, then I could help.

If you ever need help with your omnirom build i would love to help out with everything that i can. Daisy really needs more support to be a very good device.

hi!
anyone know, is this build of LOS 15.1 support correct notch area?
and what about Onmi build?
i want give possible help if need)

Thanks for your work, I hope soon More roms for this great device

ok, installed)
not work:
sound jack (and fm-radio because headset not detected);
notch not apply;
charger led;
wi-fi
bug: sometimes after tapping screen blink with red border
other thing worked in first try. quick and stable but it's very outdated)
.

wertus33333 said:
I NEED TESTERS
I am building omni now, so cant go back to los and test but if someone can test i might be able to fix it.
TEST:
-download attached zip
-open on pc or device
-copy the files to the corresponding folder (the folder they are in) in "/system" with a root file manager or adb. CAREFUL do not overwrite files already existing. PLEASE only copy the things in etc (especially etc/firmware/wlan/prima/WCNSS_cfg.dat) first, reboot, check if working, if doesnt work, copy other things.
-set permissions accordingly to other files in same folder
-reboot and check if wifi works
Click to expand...
Click to collapse
not worked
and usb-tethering too

eremitein said:
sometimes after tapping screen blink with red border
Click to expand...
Click to collapse
I understood why this is happening
I saw the same behavior in the AEX build, which
used the build type "eng"
you also

Can anyone give me the logs for the bugs?

Is this Rom abandoned?

ghanipradita said:
Is this Rom abandoned?
Click to expand...
Click to collapse
Yup. This phone is abandoned in general, which is a shame

eremitein said:
ok, installed)
not work:
sound jack (and fm-radio because headset not detected);
notch not apply;
charger led;
wi-fi
bug: sometimes after tapping screen blink with red border
other thing worked in first try. quick and stable but it's very outdated)
.
Click to expand...
Click to collapse
Thanks for testing. saksham is working on a new build (with updated vendor, etc), will let you know if we need testers.
Nice to know: The blinking red borders show layout updates, they flash in all eng (=developer) builds. If changing the build variant to userdebug (debuging enabled) or user (oem/production builds with few debuging enabled) they vanish.

ghanipradita said:
Is this Rom abandoned?
Click to expand...
Click to collapse
kftX said:
Yup. This phone is abandoned in general, which is a shame
Click to expand...
Click to collapse
Nope, it is not abandoned but we are very few people working on it and none of us has great android experience. Also, all of us do this in our spare time and therefore it can take time. If you want to speed up the build, supply logs (clean install rom, install adb on pc, execute
Code:
adb bugreport > bugreportDATE.txt
or
Code:
adb logcat > logcatDATE.txt
, share the reports), error descriptions (like @eremitein) and/or read on how to build a rom for a device yourself.
eremitein said:
I understood why this is happening
I saw the same behavior in the AEX build, which
used the build type "eng"
you also
Click to expand...
Click to collapse
oh, you already saw this xD

wertus33333 said:
Nope, it is not abandoned but we are very few people working on it and none of us has great android experience.
Click to expand...
Click to collapse
Editing this out of respect even though none was shown.
Also, I would love to help but with the lack of a proper working TWRP (encryption, restore backup issues) I really can't give it the time needed with all the stuff I'd have to reinstall every time, since I need my phone up and working nearly 100% of the time. If a decent version TWRP is released, I'll gladly help.
Glad you're still working on this though, just don't act like we should've known that you still where when the thread was dead for months. Good luck.

wertus33333 said:
Thanks for testing. saksham is working on a new build (with updated vendor, etc), will let you know if we need testers.
Click to expand...
Click to collapse
successful build, always happy to help

is there any reason you build los 15.1 instead of 16?

skyline91 said:
is there any reason you build los 15.1 instead of 16?
Click to expand...
Click to collapse
At the time i built the rom only 8.1 vendor (8.1 official rom) was avaiable. as i'm not really experienced with android it was easier to build 8.1 rom instead of trying to port vendor to 9.0 (while 9.0 vendor would have defenitely be officially out in a month or 2 ) and build los16. porting the device tree from 15.1 to 16.0 should be easy. Also, i don't like los, i want omni .

[SGSI][Pie][Semi-bugless]MIUI 11

Welcome to MIUI sGSI For Galaxy J7 2017
TESTED ON J730X​
Some information you should know..
This is a fully working MIUI sGSI with Android version 9.0
If you want to report a Bug, read the F.A.Q First Then provide a logCat OR LoggingKit.zip with detailed explanation
Read the instructions and the F.A.Q Before installing the rom or posting a reply.
I don't own any files here, except patch files.
So, we are here with sGSI. It's normally called "unstable" and "not for daily usage" so users are recommended to go for GSI. But GSI lacks features and has AOSP-like design that some users may be bored of that. And now we finally break that law. sGSI can now be used as daily drivers.
As the nature of these sGSI go, it was a non stop battle for almost 3 weeks straight to get it to this point where all features are working as expected. if you appreacite this work Hit the Thanks button
RULES OF POSTING : READ everything before commenting, And especially the instlal steps, the rom has been tested throughly for a long time, so if you have an critical issue like not booting or no sim, you missed the instructions, posts that are irrelevant to this project will be ignored(Constructive criticism is welcomed). If you do face a new bug however, dont just say "hey bug here" provide more information, and a LOGCAT, bug reports without logcats will most likely be ignored.
FEATURES:
Based on MiuiMiX 11 by MMX Team 9.12.26 using ErfanTools
Android 9.0
MIUII 11 Features
Semi-SIM support (Currently one SIM only)
Heavily debloated
Zipaligned
Very Optimised
Battery and performance focused
Full MIUI without missing vital apps
Rootable with Magisk
RMM/KnoxGuard/Defex Free
And many more
Kernel:
You can choose either latest CronosKernel by @ananjaser1211, or KRAKEN kernel by @SPARTANICUS
Install steps:
ensure you have LATEST TWRP from Here
Download all the files in the DOWNLOAD section
Wipe everything (SYSTEM,DATA,CACHE,DALVIK and preferably Internal storage all together)
Flash Project Spaget 3.0 (not X!) here and follow the steps there.
Flash MIUI-Aonly-9-20191230-ErfanGSI.img to SYSTEM
Flash your desired kernel, either Cronos or KRAKEN (must be using Treble version)
[IMPORTANT] Flash Magisk in order to have patch working
Flash sGSI-Patch.zip
Flash NFC Patch
After the boot animation is on for 30~60 Seconds. Hold VolumeDown+power until the device reboots
Install Google Play Services apk in Downloads section in order to get setup working
Setup your rom and READ the F.A.Q for more information.
BUGS:
Signal bar doesn't work (always empty) but it's acturally working
FM Radio (No FM Radio app in image)
Only one SIM is working at the moment
VoLTE not working (need another fixes)
SCREENSHOTS:
Imgur
CREDITS:
IF you helped in this GSI and i forgot you, tell me in a PM or in a reply
@ananjaser1211 for his Project Spaget, CronosKernel and HUGE contribution for Exy7870
@SPARTANICUS for KRAKEN Kernel
@SrCDA for his NFC patch
@erfanoabdi for his tools to port GSIs
And the rest of EliteTeam
DOWNLOADS ARE IN POST 2

DOWNLOADS:
Official Treble support Group : Telegram
----------------------------------------------------------------
All files are uploaded here: Google Drive
GSI: Here (My Google Drive acted up and does not let me upload any more files)

FAQ:
Good idea to read this F.A.Q While the rom is installing
Notes:
Q : Brightness bar not working / Camera doesn't work
A : You have flashed Spaget X instead of Spaget 3.0. Reinstall again
Q : Phone doesn't detect any SIM cards
A : Flash latest Cronos/KRAKEN kernel
Q : Everything on my screen is so small [J730 only]
A : Go to Settings > Developer settings > Set screen density to 411
Q : I got front camera stretch
A : Change resolution from 16:9 to 4:3
Q : Can I use front flashlight?
A : No, Samsung has their own libs, for now no apps can use front flashlight. Back flashlight still works
Q : How is battery Life ?
A : With some tests and some cycles, it will be better than stock due to optimzations
Q : the phone wont install any apps
A : Reboot

One more

does the rom have some type of error for daily use

VoLTE : Not work, need flash Magisk Module and using Phone App to VoLTE work
All work normal, just a Android Pie but like Android Q MIUI :good:
Great work

The first boot is so longer? I've waiting more than 10 minutes and don't boot. Or is bootloop?
And i've not found the MIUI-Patch.zip, only sGSI-Patch.zip

What android version is this? Can i flash the official magisk? There's no camera stretch bug? Like other gsi rom?

gabriel.oliveira.brito said:
The first boot is so longer? I've waiting more than 10 minutes and don't boot. Or is bootloop?
Click to expand...
Click to collapse
After the boot animation is on for 30~60 Seconds. Hold VolumeDown+power until the device reboots
gabriel.oliveira.brito said:
And i've not found the MIUI-Patch.zip, only sGSI-Patch.zip
Click to expand...
Click to collapse
Thanks for noticing, I forgot to rename the file.

NindoS said:
VoLTE : Not work, need flash Magisk Module and using Phone App to VoLTE work
Click to expand...
Click to collapse
I don't use VoLTE, so I couldn't test if it works. Can you tell me which Magisk module you used?
NindoS said:
All work normal, just a Android Pie but like Android Q MIUI :good:
Great work
Click to expand...
Click to collapse
Nice

Updated FAQ and sGSI patch. I forgot to add an important fix in patch, so anyone using this MIUI, reflash the new patch right now :good:

I tried again, followed all the steps as requested. On the first boot, I restarted the phone after approximately 30 seconds. But I still bootloop. I'm using Project Spaget 3.0, but I can't find a topic in the forum. Could you send me your Project Spaget zip file?
My logcat is on attachments

nfc not working. I installed the fix on the twrp and it failed, I had to install the fix when I started the cell phone so that it did not give me an error and it appears as a module installed in magisk but it does not work

Working fine but having bug
I have a bug with the WhatsApp application when viewing the stories that contain videos are not played and the app freezes.
I attach my log Cat about the error

I have problems with external storage, the system does recognize it but with third-party apps such as file explorer or streaming apps like spotify they don't detect external storage, I've tried to modify the vold.fstab and nothing. some fix they have

dani_hedz said:
I have problems with external storage, the system does recognize it but with third-party apps such as file explorer or streaming apps like spotify they don't detect external storage, I've tried to modify the vold.fstab and nothing. some fix they have
Click to expand...
Click to collapse
It's sGSI related problem, don't know why it happens

argenmu09 said:
nfc not working. I installed the fix on the twrp and it failed, I had to install the fix when I started the cell phone so that it did not give me an error and it appears as a module installed in magisk but it does not work
Click to expand...
Click to collapse
It works for me

Wi-Fi not working