Quick question for all the rooting gurus out there. I put an updated MIUI rom on my phone and went to re-load Swype from their website, completely legit.
I get an error message when I go to run it saying that my device isn't supported and will run with limited function.
Has anybody found a way around this error messages? Are people finding it with other roms?
Thanks!
That would be happening because you are using ur wrong version...
Sent from my Incredible using XDA Premium App
ianian28 said:
Quick question for all the rooting gurus out there. I put an updated MIUI rom on my phone and went to re-load Swype from their website, completely legit.
I get an error message when I go to run it saying that my device isn't supported and will run with limited function.
Has anybody found a way around this error messages? Are people finding it with other roms?
Thanks!
Click to expand...
Click to collapse
It says that because it thanks your phone is an iPhone because of the Rom your using.... atleast that's my guess.... you might ask on the miui thread they may have a version that works
Sent from my Incredible using XDA App
It's a bit bootleg but the only way I've been able to do it so far:
1. Download and install root explorer. You'll have to pay but it's a useful app and worth it
1. Download swype installer and install swype
2. After installation, there will be a screen with 4 options:
a. watch video
b. start tutorial
c. generate license
d. finish
Click "Generate license"
3. Click "select android keyboard" and change the radio button from "swype" to "android keyboard"
4. Press the home button to exit swype installer and open root installer
5. Go to /data/app
6. Click on "com.swype.android.inputmethod-1.apk" and long hold to bring up the options menu
7. Click move, scroll to /sdcard/download and click "paste"
8. Press the home button to exit root explorer
9. Open swype installer. You should get a force close error. If you do not and instead see the screen with "disable swype", click the back button which will bring you back to the home screen then click swype installer again. Do not continue until swype installer force closes.
10. Go back to root explorer and move "com.swype.android.inputmethod-1.apk" back to /data/app
11. Go back to the home screen and open swype installer
12. Click "select swype" and then select swype
13. Click "finish"
14. Enjoy
Hope that helps. If you have any questions, let me know.
dan0100 said:
It's a bit bootleg but the only way I've been able to do it so far:
1. Download and install root explorer. You'll have to pay but it's a useful app and worth it
1. Download swype installer and install swype
2. After installation, there will be a screen with 4 options:
a. watch video
b. start tutorial
c. generate license
d. finish
Click "Generate license"
3. Click "select android keyboard" and change the radio button from "swype" to "android keyboard"
4. Press the home button to exit swype installer and open root installer
5. Go to /data/app
6. Click on "com.swype.android.inputmethod-1.apk" and long hold to bring up the options menu
7. Click move, scroll to /sdcard/download and click "paste"
8. Press the home button to exit root explorer
9. Open swype installer. You should get a force close error. If you do not and instead see the screen with "disable swype", click the back button which will bring you back to the home screen then click swype installer again. Do not continue until swype installer force closes.
10. Go back to root explorer and move "com.swype.android.inputmethod-1.apk" back to /data/app
11. Go back to the home screen and open swype installer
12. Click "select swype" and then select swype
13. Click "finish"
14. Enjoy
Hope that helps. If you have any questions, let me know.
Click to expand...
Click to collapse
You sir, are a gentleman and a scholar... I tried so many different things and wasted hours until I found this post. Follow his instructions step by step and you'll be up on swype in no time
This worked for me too. Just to add on, the root permissions for the com.swype.android.inputmethod-1.apk should be rw-r--r--. Set this permission in root explorer after long pressing it from data/app after you have completed everything. This is for people who are not able to see swype after rebooting their phone
I usually use TB to backup my swype from a sense rom (or any other rom where swype works correctly) then when I use MIUI i go to Tb and restore. Always worked for me!
Has anybody got this to work with the new Swype 3 beta? I have tried this twice to no avail.
JLO73 said:
Has anybody got this to work with the new Swype 3 beta? I have tried this twice to no avail.
Click to expand...
Click to collapse
I got swype 3 and it is working perfectly on my MIUI
I've got it downloaded and installed but it will not let me license it. Tried the above trick twice and cannot get it to work.
JLO73 said:
I've got it downloaded and installed but it will not let me license it. Tried the above trick twice and cannot get it to work.
Click to expand...
Click to collapse
Found this solution from MIUI.us forums, it requires that you have an already licensed version of swype 2.x
Ok.. have a workaround. Miui automatically enables keyboards so no way to disable it.
1) If you have titanium backup you can first backup swype (not the installer), then uninstall swype, long press home and re-open the swype installer and proceed to login and reinstall swype.
2) Once installed don't press "Done. Long press home and switch back to titanium backup and restore your copy of swype, then re-open the installer (or press Done if already open).
3) Installer should now show something like "your copy is licensed, select swype" Just press select and choose swype, then click Finish. (Do not click Generate license).
Click to expand...
Click to collapse
That did the trick. Titanium backup had already backed up the new version and it kept reinstalling it and would not work. Found a backup of the 2.x and was able to restore it. Thanks for all the help.
Thankyou so much
dan0100 said:
It's a bit bootleg but the only way I've been able to do it so far:
1. Download and install root explorer. You'll have to pay but it's a useful app and worth it
1. Download swype installer and install swype
2. After installation, there will be a screen with 4 options:
a. watch video
b. start tutorial
c. generate license
d. finish
Click "Generate license"
3. Click "select android keyboard" and change the radio button from "swype" to "android keyboard"
4. Press the home button to exit swype installer and open root installer
5. Go to /data/app
6. Click on "com.swype.android.inputmethod-1.apk" and long hold to bring up the options menu
7. Click move, scroll to /sdcard/download and click "paste"
8. Press the home button to exit root explorer
9. Open swype installer. You should get a force close error. If you do not and instead see the screen with "disable swype", click the back button which will bring you back to the home screen then click swype installer again. Do not continue until swype installer force closes.
10. Go back to root explorer and move "com.swype.android.inputmethod-1.apk" back to /data/app
11. Go back to the home screen and open swype installer
12. Click "select swype" and then select swype
13. Click "finish"
14. Enjoy
Hope that helps. If you have any questions, let me know.
Click to expand...
Click to collapse
I looked everywhere for a way to get swype 3.x to work on my vibrant with MIUI but none of the stuff I found actually worked, EXCEPT THIS.
Like someone said right after your post:
You Sir, are a gentleman and a scholar...
This way took a couple of tries but it definitely worked
Tried the Titanium method thousands of times and variants on my Nexus S and didn't got it working.
The File Manager method worked like a charm, on the second try. Don't know if it matters, but worked after rebooting the phone and following rhe guide.
The good news is you don't need to expend money buying the Root Explorer App. I've used ES file explorer without any problem.
i didn't do anyspecial "trick" to get mine working, i just went thru and unistalled all the older version.. cleared cahces of app and installer, installed a redownloaded version off webpage.. then just went all the way thru till the 4 part screen, "generate license" just select the swype option and then i think i hit finish... can't remember the rest.. sorry..
dan0100 said:
It's a bit bootleg but the only way I've been able to do it so far:
1. Download and install root explorer. You'll have to pay but it's a useful app and worth it
1. Download swype installer and install swype
2. After installation, there will be a screen with 4 options:
a. watch video
b. start tutorial
c. generate license
d. finish
Click "Generate license"
3. Click "select android keyboard" and change the radio button from "swype" to "android keyboard"
4. Press the home button to exit swype installer and open root installer
5. Go to /data/app
6. Click on "com.swype.android.inputmethod-1.apk" and long hold to bring up the options menu
7. Click move, scroll to /sdcard/download and click "paste"
8. Press the home button to exit root explorer
9. Open swype installer. You should get a force close error. If you do not and instead see the screen with "disable swype", click the back button which will bring you back to the home screen then click swype installer again. Do not continue until swype installer force closes.
10. Go back to root explorer and move "com.swype.android.inputmethod-1.apk" back to /data/app
11. Go back to the home screen and open swype installer
12. Click "select swype" and then select swype
13. Click "finish"
14. Enjoy
Hope that helps. If you have any questions, let me know.
Click to expand...
Click to collapse
This is the only thing that worked for me. NOTE: It only worked for me after I tried it with the Full Swype Beta instead of the English/Spanish version.
oh my..
ure soo great,,
thanks alot,,
thanks button for u
This is a known bug on the Swype website. They have posted a workaround which I tried and it worked after several attempts:
"Unable to install Swype on MIUI Rom
When Swype is installed it needs to be unloaded from Android at the time the Swype Installer passes the authentication key to the Swype program. MIUI attempts automatically load and enable any input device into memory as soon as they are available. Because of this there is no reliable way of getting Swype working on MIUI, and even if you do it may not stay enabled for long.
However if you'd like to try, Android Peak has developed a workaround that works some of the time.
UPDATE: marchief has found a workaround which does not require the use of Titanium Backup, may produce more consistant results:
Download installer
Download and install swype
At the enable step leave the installer and select swype as the input device
Reboot your phone
After Reboot, open the swype installer again
Select "Select Android keyboard" and change input back to android keyboard
Choose disable swype, go to applications and uninstall swype but NOT THE INSTALLER
Go back to the installer and generate license
This should put you through the download process again so just follow it and re-install swype
Once re-installed it should generate the license, but it still won't work
Reboot your phone again and all should work, enjoy!"
dan0100 said:
It's a bit bootleg but the only way I've been able to do it so far:
1. Download and install root explorer. You'll have to pay but it's a useful app and worth it
1. Download swype installer and install swype
2. After installation, there will be a screen with 4 options:
a. watch video
b. start tutorial
c. generate license
d. finish
Click "Generate license"
3. Click "select android keyboard" and change the radio button from "swype" to "android keyboard"
4. Press the home button to exit swype installer and open root installer
5. Go to /data/app
6. Click on "com.swype.android.inputmethod-1.apk" and long hold to bring up the options menu
7. Click move, scroll to /sdcard/download and click "paste"
8. Press the home button to exit root explorer
9. Open swype installer. You should get a force close error. If you do not and instead see the screen with "disable swype", click the back button which will bring you back to the home screen then click swype installer again. Do not continue until swype installer force closes.
10. Go back to root explorer and move "com.swype.android.inputmethod-1.apk" back to /data/app
11. Go back to the home screen and open swype installer
12. Click "select swype" and then select swype
13. Click "finish"
14. Enjoy
Hope that helps. If you have any questions, let me know.
Click to expand...
Click to collapse
I have been trying to get Swype to work since I installed MIUI 1.7.15 last Saturday, and nothing seemed to work. Followed your guide and it works great! Thanks SO much.
I used this method to root my phone:
Copy the CWM_SuperUser_v3.0.7.zip file to the internal SD card of your phone.
Turn off your phone.
Boot your phone to ClockworkMod Recovery by pressing the Volume Up, Home, and Power keys together. Release them when the screen turns on.
Use the Volume buttons to navigate and the Power button to select an option.
Select Install ZIP From SD Card > Choose ZIP From SD Card and select the CWM_SuperUser_v3.0.7.zip file that you copied to your phone earlier.
Once you have flashed it, reboot your phone by selecting Go back and Reboot System Now.
Your phone is now rooted but you still need to install BusyBox on your phone. You can get it for free from the Google Play Store.
Run the BusyBox free application on your phone.
It will prompt you to allow root access. Select Allow.
Tap the red “X” in order to close the dialog window that will pop up.
Allow BusyBox to scan your phone.
Tap Install to install BusyBox and make the necessary file changes.
Update your su binaries by doing the following:
From the app drawer of your phone, open the Superuser app.
Tap the wrench icon on the upper corner to go to the app’s settings menu.
Under the General section towards the end of the list, tap “Su Binary”.
Select Update and you are done.
After I did this I was able to send text messages, but when I woke up the next morning I was no longer able to send texts. Does anyone know how I get my phone to send texts again? And yes I rebooted my phone, and unrooted it and rooted it again. Still the same problem occurs.Thanks
Hello there,
I have a simple question, I'm sure most of you developers know how to help us all.
I have a NST not rooted (I don't really need for mods and stuff) but I would like to get rid of the manual and the quick start guide that really annoys me.
Is it possibile to create a zip (maybe an img would be even better) that starts ClockworkmodRecovery and then that includes a flashable zip that deletes the 2 epubs?
So that everyone can delete them once and for all. :laugh:
Let me know if I can help you.
Perhaps it would be better to download and install a root explorer (such as ES File Explorer) and use it to browse and delete these epub files.
Sent from my Nexus 7 using Tapatalk 4 Beta
mikey242 said:
Perhaps it would be better to download and install a root explorer (such as ES File Explorer) and use it to browse and delete these epub files.
Sent from my Nexus 7 using Tapatalk 4 Beta
Click to expand...
Click to collapse
well, that includes rooting, installing a launcher, installing a program...
i thought that a zip that does it without rooting and without anything permanent on the device would be better.
borzowsky said:
well, that includes rooting, installing a launcher, installing a program...
i thought that a zip that does it without rooting and without anything permanent on the device would be better.
Click to expand...
Click to collapse
I make what you asked for, find it enclosed. It is a zip update for CWM. I guess you know how to proceed but I've left instructions below for those who face this issue for first time:
1. Make a backup of your NST with noogie following this instructions.
2. Download the file enclosed within this post.
3. Burn 2gb_clockwork-rc2.img file to be written on a SD-Card using Win32DiskImager or dd on linux.
4. Open the SD-Card (where you burn 2gb_clockwork-rc2.img) and copy the DeletingEpubGuides.zip on the SD-Card.
5. Power down and insert the SD-Card on the NST.
6. Press the power button for 3 seconds, so that the device boots (you don't have to hold the power button after the 3 seconds)
7. As soon as the display changes to the "CWM logo" screen, push and hold the lower left and the lower right button until the screen changes again. Wait until you see the recovery. Hence, you'll be already booted into Clockworkmod recovery (Button layout: Both Buttons on the left: BACK / Upper button on the right: UP / Lower button on the right: DOWN / n button: SELECT / Power button: TOGGLE DISPLAY).
8. Install through CWM recovery the DeletingEpubGuides.zip update placed on the SD-Card. When you'll read "Done" press power button during 10 second and eject the SD-card.
9. Press power button to turn on the nook to let the devices open commonly.
I've just tested it over my NST v1.1.2 and works without problem.
Best.
kuskro said:
I make what you asked for, find it enclosed. It is a zip update for CWM. I guess you know how to proceed but I've left instructions below for those who face this issue for first time:
1. Make a backup of your NST with noogie following this instructions.
2. Download the file enclosed within this post.
3. Burn 2gb_clockwork-rc2.img file to be written on a SD-Card using Win32DiskImager or dd on linux.
4. Open the SD-Card (where you burn 2gb_clockwork-rc2.img) and copy the DeletingEpubGuides.zip on the SD-Card.
5. Power down and insert the SD-Card on the NST.
6. Press the power button for 3 seconds, so that the device boots (you don't have to hold the power button after the 3 seconds)
7. As soon as the display changes to the "CWM logo" screen, push and hold the lower left and the lower right button until the screen changes again. Wait until you see the recovery. Hence, you'll be already booted into Clockworkmod recovery (Button layout: Both Buttons on the left: BACK / Upper button on the right: UP / Lower button on the right: DOWN / n button: SELECT / Power button: TOGGLE DISPLAY).
8. Install through CWM recovery the DeletingEpubGuides.zip update placed on the SD-Card. When you'll read "Done" press power button during 10 second and eject the SD-card.
9. Press power button to turn on the nook to let the devices open commonly.
I've just tested it over my NST v1.1.2 and works without problem.
Best.
Click to expand...
Click to collapse
thank you very much, is it working on 1.2.1?
what is the path of the files that are deleted?
borzowsky said:
thank you very much, is it working on 1.2.1?
what is the path of the files that are deleted?
Click to expand...
Click to collapse
/system/media/books/
Success! (1.2.1)
borzowsky said:
thank you very much, is it working on 1.2.1?
what is the path of the files that are deleted?
Click to expand...
Click to collapse
I'm running 1.2.1, and I found them at /system/assets/userguides/standard/ . (There's also a /glowlight/ folder in the /userguides/ directory, FWIW.)
EDIT: However, deleting them there doesn't seem to remove them from the library. And I can't find the /system/media/books folder. Hmmm...
EDIT AGAIN: Also found them in /data/cloud_assets/books/userguides . Deleting, rebooting, and will report back here if that did it.
LAST EDIT I SWEAR: SUCCESS! Deleting them from all the locations listed above made them vanish from the library.
So many of us have the almost broken power button and it creates problem in waking up phone so here's easy way to enable volume rocker wake
This is useful for people who use CM or PA based rom as AOKP and PAC already has volume wake feature
1) Download Xposed Module from here http://forum.xda-developers.com/showthread.php?t=1574401
2) Install the framework and reboot
3) Download and Install this Module http://d-h.st/PeV
4) Open Xposed Framework app then open Modules and Tick the Modaco toolkit module
5) Click the Modaco toolkit module and then go to "device Specific" and press HTC One
6) Tick "Enable Volume Wake" option and then reboot
Congrats now you have enabled volume wake , though it was made for HTC One but still it works on our device
Thanks......The power button really holds me back on installing some roms
4.2.2 fix
cyb3r.pr3dat0r said:
So many of us have the almost broken power button and it creates problem in waking up phone so here's easy way to enable volume rocker wake
This is useful for people who use CM or PA based rom as AOKP and PAC already has volume wake feature
1) Download Xposed Module from here http://forum.xda-developers.com/showthread.php?t=1574401
2) Install the framework and reboot
3) Download and Install this Module http://d-h.st/PeV
4) Open Xposed Framework app then open Modules and Tick the Modaco toolkit module
5) Click the Modaco toolkit module and then go to "device Specific" and press HTC One
6) Tick "Enable Volume Wake" option and then reboot
Congrats now you have enabled volume wake , though it was made for HTC One but still it works on our device
Click to expand...
Click to collapse
Please note that this won't work on 4.2.2 as Xposed doesn' support sdk 17. To get Volume rocker on 4.2.2 is a little advanced.
1) Extract the Settings.apk and framework-res.apk of your rom
2) Install framework using "apktool if framework-res.apk"
3) Decompile Settings.apk using "apktool d Settings.apk"
4) Open up values/bools.xml using Gedit or Notepad++
5) Look for the line that says "hasVolumeRockerWake"
6) Change the value of that line from false to true
7) Now save and close
8) Recompile apk using "apktool b Settings"
9) In the folder named dist your finished apk will be there
10) Sign your apk
11) Install as system app
12) If you now go into Settings>Display there will be an option to enable Volume Rocker Wake
Note:
If after you installed the apk the app doesn't appear then follow this information.
thehacka1 said:
Please note that this won't work on 4.2.2 as Xposed doesn' support sdk 17. To get Volume rocker on 4.2.2 is a little advanced.
1) Extract the Settings.apk and framework-res.apk of your rom
2) Install framework using "apktool if framework-res.apk"
3) Decompile Settings.apk using "apktool d Settings.apk"
4) Open up values/bools.xml using Gedit or Notepad++
5) Look for the line that says "hasVolumeRockerWake"
6) Change the value of that line from false to true
7) Now save and close
8) Recompile apk using "apktool b Settings"
9) In the folder named dist your finished apk will be there
10) Sign your apk
11) Install as system app
12) If you now go into Settings>Display there will be an option to enable Volume Rocker Wake
Note:
If after you installed the apk the app doesn't appear then follow this information.
Click to expand...
Click to collapse
Causes settings to disappear and doest comes back even after signing I am on 4.2.2 and SDK 17 and it works flawless provided you use Jdevs's CM
Sent from my HTC M7 using Tapatalk
cyb3r.pr3dat0r said:
Causes settings to disappear and doest comes back even after signing I am on 4.2.2 and SDK 17 and it works flawless provided you use Jdevs's CM
Sent from my HTC M7 using Tapatalk
Click to expand...
Click to collapse
Solution for Volume Rocker
cyb3r.pr3dat0r said:
So many of us have the almost broken power button and it creates problem in waking up phone so here's easy way to enable volume rocker wake
This is useful for people who use CM or PA based rom as AOKP and PAC already has volume wake feature
1) Download Xposed Module from here http://forum.xda-developers.com/showthread.php?t=1574401
2) Install the framework and reboot
3) Download and Install this Module http://d-h.st/PeV
4) Open Xposed Framework app then open Modules and Tick the Modaco toolkit module
5) Click the Modaco toolkit module and then go to "device Specific" and press HTC One
6) Tick "Enable Volume Wake" option and then reboot
Congrats now you have enabled volume wake , though it was made for HTC One but still it works on our device
Click to expand...
Click to collapse
Anyone tested this on Sense 2.1 roms? Will it compatible ?
TRuth14 said:
Anyone tested this on Sense 2.1 roms? Will it compatible ?
Click to expand...
Click to collapse
Xposed framework is experimental on Gingerbread(the official developer does'nt support it).........so I doubt this would work on sense 2.1
TRuth14 said:
Anyone tested this on Sense 2.1 roms? Will it compatible ?
Click to expand...
Click to collapse
we already have mod for sense roms :fingers-crossed:
Can i use this for xperia active ???
** Unlock Bootldr first in Download Mode.
** Flash (downgrade) to lower Firmware with the same Binary.
** Everytime you use Odin again make sure you click reset and disable auto reboot.
Things you need:
=============
- TWRP (Root + Magisk) - TWRP_A505_QQ_BTC4
- magisk_patched.tar
- Magisk.APK (latest)
- SmaliPatcher-0.0.6.7-fOmey_XDA
** Plug in your cable.
** Do not forget to Enable Developer Options
1) Enable OEM + Debug and Flash Stockrom in Odin
** If Oem doesn't show up.. Op en General Management/ Date and Time/ Disable 'Use 24-hour format'
** Connect to WI-FI and reboot the Phone, it will show up.
2) Now turn 'Off' the phone.
3) Now hold Down Button and Power Button, the Download Menu will show up.
4) Now open Odin and flash TWRP_A505_QQ_BTC4.tar
5) Once done.. hold Down Button and Power Button for 7sec.
6) Now the Phone will reboot a few times, wait till your able to config it.
** Do not connect with WI-FI yet.
7) Once done.. enable 'Developer Options'
** Do not forget to Enable Developer Options again.
** Disable Auto Update System
** Enable USB Debugging
** Disable Auto Download over WI-FI in 'Software Information'
8) Put Magisk.APK on the Micro SD Card from the phone and install the APK.
Run the App and leave it open.
Now extract the Update Firmware from your phone model and copy the AP file to your desktop.
Connect the phone to Pc and place the AP file on the Micro SD Card.
Go back to the app 'Magisk' on the phone and select 'Magisk is not installed - Install'
Tab 'Install' and choose 'Select and Patch a File'
Now open the file AP and the app will start flashing.
Once the 'Image' is written.. press the disk image in the right top corner.
Now on Pc check the phone storage and open the folder 'Download'
Copy the files magisk_install_log_2020-08-11T02:25:08Z.log and magisk_patched.tar to Pc.
Once done
9) Now turn 'Off' the phone.
10) Hold Down Button and Power Button, the Download Menu will show up.
11) Now flash magisk_patched.tar in AP and BL, CP, Home_CSC from the Original Firmware.
12) Once done.. hold Down Button and Power Button.
13) Now the device will reboot a few times.. and you will be to configure it.
** Unplug your cord.
** Dont enable WI-FI yet in these options.
** If it doesn't start after 5min press Down Button and Power Button for 7sec.
** If it is rebooting when you configure it.. than just repeat to configure it once booted.
** Still rebooting? Make sure you press OK after the warning screen when its rebooting.
14) Once on the Phone screen.. Open Magisk APK and it will be installed.
** Check also with Root Checker to confirm.
15) Now connect to WI-FI and open Magisk app, (Dont let it download the ZIP file if it ask for)
** If it ask you to do.. clear cache and data in Settings/ Apps
16) Once done close the app again..
17) Now your device is rooted.
** Do not forget to Enable Developer Options again.
** Disable Auto Update System
** Enable USB Debugging
** Disable Auto Download over WI-FI in 'Software Information'
18) Run ADB and follow steps to install + Drivers.
Once done press OK.
19) SmaliPatcher
** Make sure 'Developer Options' and 'USB Debugging' is enabled.
Connect your phone from USB to Pc.
On the phone press 'OK' to enable 'USB Debugging'
Run SmaliPatcher and it will download the latest necessary binary's.
Now enable the options below.
- Mock Locations
- Secure Flag
- Signature Spoofing
- Samsung Knox
Now click on 'ADB PAtch' and wait till the task is done.
A file named '[email protected]' is now generated in the SmaliPatcher folder.
20) Install Module
Copy the output file '[email protected]' to Micro SD Card.
Now open 'Magisk' and in the options select 'Modules'
Tab on the + and search for the file you placed on the Micro SD Card.
Once done.. reboot the phone.
21) Install Fake GPS Location
Open up 'Play store' and search for Fake GPS Location - GPS Joystick (The App Ninjas)
Once installed.. go back to 'Developer Options'
Find the option 'Mock location app' and tab on it.
Choose 'GPS Joysctick' and close the menu.
22) Link2SD
Open up 'Play store' and search for Link2SD
Once installed.. open the app.
Grant acces and search for 'GPS Joystick'
Tab on it to open and tab again above in the right corner for options.
Now choose 'Convert to system app' and press 'OK'
Once done.. close the menu and reboot the phone.
** If this method didn't work.. go to App Store and download Root Browser.
** Copy the apk to root Directory/ System/ App/ (File Here)
** You could also load ADB Shell - SU - Mount - cp xxxx.apk /system/app or mv xxxx. apk /system/app
(Or search Google for isunshare 2 Ways to Convert User App to System App on Android)
23) Pokémon GO
Open up 'Play Store' and search for Pokémon GO.
Once installed.. close the menu.
24) Hide Magisk
Open the app and go to settings.
Enable the option 'Magisk Hide'
After this step search for 'Hide Magisk Manager'
Tab on it and rename it to 'Manager'
Once done.. Reboot your phone.
** To prevent losing Root acces..
I also provide you to check and disable every security option from apps and settings.
I used Method 1 & 2 for two times, after that it allowed me to update it to latest magisk v20.4
Also i disabled most security options on the phone and Magisk keeped root acces.
Method 1 !!
=========
1) Open settings.
2) Tab on About Phone.
3) Now scroll down and under 'Looking for something else' tab 'Reset'
4) Tab on Factory Data Reset and tab Reset/ Delete All.
5) Open Magisk and select 'Cancel' the download.
6) Now close the app and reboot your Phone.
7) Phone will reboot and keep Root acces.
Method 2 !!
=========
1) Open Settings.
2) Go to Apps.
3) Search for Magisk.
4) Tab on Storage.
5) Clear Caché and Data.
6) Now reboot your phone and it keep Root Acces without Rebooting every 10sec.
I am waiting for the day when someone will post a guide like this to fully enable camera2api and make Gcam work.