[EOL][ROM][7.1.2_r36][UNOFFICIAL]LineageOS 14.1 [08 Sep 2019] - Moto G4 Plus ROMs, Kernels, Recoveries, & Other De

[EOL][ROM][7.1.2_r36][UNOFFICIAL]LineageOS 14.1 [08 Sep 2019] - Moto G4 Plus ROMs, Kernels, Recoveries, & Other De

FAQ & issues
Flashlight and Chop Chop gesture doesn't work on HAL3 builds?
Just reboot your phone, it should work fine after a reboot.
I have some trouble with SIM detection or VoLTE
Be sure to flash the N Firmware & modem before flashing this ROM (with full wipe)

Reserved

Update: On Nougat everything works just fine

Thank you guys for the great work! Just made a build myself, it looks good

Thanks a lot. Downloading and I will provide feedback after use!
Sent from my XT1642 using Tapatalk on CyanogenMod 14.1 (dualboot)

Thanks to all involved.... Installed with no issues and working great on xt1622 single sim.

EvilHowl said:
I'm going to test it right now. Wait some minutes.
EDIT: ROM isn't working properly after dirty flashing over latest unofficial CM14.1. That's understable, so I'm going to do a clean install and will update.
EDIT 2: ROM is working perfectly, 0 bugs found. I think you can release official CM
PD: The bootanimation is 540p and our device is 1080p.
Click to expand...
Click to collapse
We scaled down the bootanim res inorder to reduce the boot up time

I too tried a dirty flash over the latest 'clean' CM from @Silesh.Nair. So far so good however. First I only had a back button. Home and 'latest apps' we're missing. A reboot restored them! Going to do some further testing. If I run in any other bugs, I'll first do a clean install.
Sent from my XT1642 using Tapatalk on CyanogenMod 14.1 (dualboot)

Theme engine is working?

123jhoww said:
Theme engine is working?
Click to expand...
Click to collapse
Not yet. For questions like this, please don't t consult a development thread! Go to the Q&A thread.
Sent from my XT1642 using Tapatalk on CyanogenMod 14.1 (dualboot)

XT1642 MM Firmware, clean flash, tested for 3 hours now:
-no data bug(needed restart to recover data after some time) but will test longer over night
-no snap camera video recording bug
-nothing found so far, except a stable bug free rom!
Thanks for the hard work!
@123jhoww no theme engine until cm implement it into source

I submitted this in the bug reports tab but I didn't like how it was formatted, so I'm going to post it here as well.
I'm unable to switch Google Play Music to external storage from internal storage. The app crashes and reopening it leaves the option to switch storage spaces unavailable.
Here's the log (ignore the name): https://www.dropbox.com/s/ozik5k5vdsa9l9n/cm141officialpcgpmerror.txt?dl=0
For reference, I'm using the 20161219 CM14.1 build, with 20161217 OpenGApps nano. This was a clean install and nothing was restored with Titanium Backup. The only modifications I have done are removed CM su from bin and xbin and flashed systemless SuperSU in order to prevent a game I play from detecting su and installed Pixel Launcher into /system/priv-app.
I didn't have this bug on Silesh.Nair's CM14.1 builds, but have it here. I've also have had this bug on AOSCP, BeanStalk, and Vanir, amongst others.

Good news for you: https://review.cyanogenmod.org/#/c/177952/.

MameTozhio said:
I submitted this in the bug reports tab but I didn't like how it was formatted, so I'm going to post it here as well.
I'm unable to switch Google Play Music to external storage from internal storage. The app crashes and reopening it leaves the option to switch storage spaces unavailable.
Here's the log (ignore the name): https://www.dropbox.com/s/ozik5k5vdsa9l9n/cm141officialpcgpmerror.txt?dl=0
For reference, I'm using the 20161219 CM14.1 build, with 20161217 OpenGApps nano. This was a clean install and nothing was restored with Titanium Backup. The only modifications I have done are removed CM su from bin and xbin and flashed systemless SuperSU in order to prevent a game I play from detecting su and installed Pixel Launcher into /system/priv-app.
I didn't have this bug on Silesh.Nair's CM14.1 builds, but have it here. I've also have had this bug on AOSCP, BeanStalk, and Vanir (and other ROMs not posted to xda by you).
Click to expand...
Click to collapse
Hi, one question, do you have little lag in the Google Now's swype in Pixel Launcher?
I haven't found anyone else with Pixel Launcher in /system/ like me.

First of all thank you very much for your effort and dedication to this project.
Now I will do a clean installation and I will try it for a couple of hours to see the operation and if there are any bugs or anything like that.

MameTozhio said:
I submitted this in the bug reports tab but I didn't like how it was formatted, so I'm going to post it here as well.
I'm unable to switch Google Play Music to external storage from internal storage. The app crashes and reopening it leaves the option to switch storage spaces unavailable.
Here's the log (ignore the name): https://www.dropbox.com/s/ozik5k5vdsa9l9n/cm141officialpcgpmerror.txt?dl=0
For reference, I'm using the 20161219 CM14.1 build, with 20161217 OpenGApps nano. This was a clean install and nothing was restored with Titanium Backup. The only modifications I have done are removed CM su from bin and xbin and flashed systemless SuperSU in order to prevent a game I play from detecting su and installed Pixel Launcher into /system/priv-app.
I didn't have this bug on Silesh.Nair's CM14.1 builds, but have it here. I've also have had this bug on AOSCP, BeanStalk, and Vanir, amongst others.
Click to expand...
Click to collapse
Same Problem here after clean install.
Gesendet von meinem Moto G4 Plus mit Tapatalk

MameTozhio said:
I submitted this in the bug reports tab but I didn't like how it was formatted, so I'm going to post it here as well.
I'm unable to switch Google Play Music to external storage from internal storage. The app crashes and reopening it leaves the option to switch storage spaces unavailable.
Here's the log (ignore the name): https://www.dropbox.com/s/ozik5k5vdsa9l9n/cm141officialpcgpmerror.txt?dl=0
For reference, I'm using the 20161219 CM14.1 build, with 20161217 OpenGApps nano. This was a clean install and nothing was restored with Titanium Backup. The only modifications I have done are removed CM su from bin and xbin and flashed systemless SuperSU in order to prevent a game I play from detecting su and installed Pixel Launcher into /system/priv-app.
I didn't have this bug on Silesh.Nair's CM14.1 builds, but have it here. I've also have had this bug on AOSCP, BeanStalk, and Vanir, amongst others.
Click to expand...
Click to collapse
Only occours with Play Music app?

123jhoww said:
Only occours with Play Music app?
Click to expand...
Click to collapse
In the past with this issue, Play Newsstand could not save things to the SD card either but I haven't tested that with this CM build, and don't plan to as it's related to this issue. Eleven (CM Music Player) couldn't read an album that was on my SD card but I don't know if that is part of this issue or not (it might be).

Moto g4 not plus xt1625 all good here no issues no soak test installed either I'm on a unlocked non Amazon variant

Related

[OFFICIAL][7.1] LineageOS 14.1 - Xiaomi Mi3 [cancro]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
All information and files — both in source and compiled form — are provided on an as is basis.
No guarantees or warranties are given or implied. The user assumes all risks of any damages
that may occur, including but not limited to loss of data, damages to hardware, or loss of
business profits. Please use at your own risk. Note that unless explicitly allowed by the warranty
covering your device, it should be assumed that any warranty accompanying your device will
be voided if you tamper with either the system software or the hardware.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit Gerrit Code Review.
Wiki
Official LineageOS Wiki: http://wiki.lineageos.org/cancro_info.html
Installation
First time LineageOS 14.1 installation on your Xiaomi Mi3:
Read the official Wiki page
Flash a custom recovery via Fastboot
Push GApps (arm) and the CM 14.1 zip to your device
Boot into Recovery
Perform factory reset
Flash the LineageOS 14.1 zip from SD card
Flash GApps from SD card
Reboot
Upgrading from CyanogenMod 14.1 :
Download the experimental migration build to your SD card
Download the latest lineageOS nightly build to your SD card
Boot into Recovery
Flash the experimental migration build
Reboot and wait until it's ready
Reboot into Recovery again
Flash the nightly build
Reboot
Supported devices
Mi3w
Mi4 (WCDMA)
These devices are supported, but the maintainer WILL NOT fix bugs that are reproduceable just in those devices
Mi4 LTE
Downloads
Download nightly : https://download.lineageos.org/cancro
-----------------------------------------------------------------------------
Google Apps (arm): http://opengapps.org/?api=7.1&variant=nano
Su addon (arm): https://mirrorbits.lineageos.org/su/addonsu-arm-signed.zip
Su remover (arm): https://mirrorbits.lineageos.org/su/addonsu-remove-arm-signed.zip
Reporting bugs
Model (Mi3 / Mi4 / Mi4 LTE)
DO NOT report bugs if you're running a custom kernel
DO NOT report bugs if you've modifies system files
DO NOT report bugs if you've installed xposed and/or other mods
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues or bugs reported in the lastest 5 pages of this thread. Any bug not reported in the bug report format below may be ignored.
Code:
Phone Informations
* Phone model (Mi3 / Mi4 / Mi4 LTE)
* LineageOS version
* Gapps version
What you did:
* Wipe data: y/n
* Upgrade from previous official LineageOS build: y/n
* Restore with titanium backup: y/n
You're using (if yes write which one) :
* Task killer
* Phone cleaner / Battery enhancer apps
* Non-stock kernel
* Modified kernel settings
* Other mods
Bug info:
* Last version it worked on
* Repro steps
F.A.Q.
I get error 7 while flashing this rom, what does it mean?
Read what the recovery says: "You're running on an unsupported (Kitkat) baseband". In order to flash the lastest CM builds you must have Miui MM baseband and partition layout installed. Visit http://bit.ly/cancroCMBaseband to learn how to update these
ROOT! ROOT! Give me root or i'll die!!! Where root is???
Root has been removed from LineageOS builds, to allow people who are not interested in root access to enjoy apps such as PokemonGo or banking apps. A zip to re-enable root will be provided next days. Other packages such as SuperSu, magisk or others are not supported and might cause problems
Why no nightly today?
Build failed. Check again tomorrow
When do I have to wipe data?
You must wipe data only when you're switching from another rom or migrating to Snapshot branch from Nightly and vice versa. You don't need to wipe data when you update in the same release channe (this applies to 13.0 -> 14.1 upgrades too)
Will you add <insert awesome feature here>?
I won't. If you write it, submit a commit to gerrit, where it will be reviewed.
The LineageOS team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
[OFFICIAL][7.1] LineageOS 14.1 - Xiaomi Mi3 [cancro], ROM for the Xiaomi Mi 3
Contributors
linuxxxx
Source Code: https://github.com/lineageos
ROM OS Version: 2.3.x Gingerbread
Version Information
Status: Testing
Created 2017-01-31
Last Updated 2017-01-31

nice

Oh...wow...Finally...!!

Finally , it's here ! [emoji14]

Great sir. Has anyone tried it? Is it stable to use as a daily driver?

ROM OS Version: 2.3.x Gingerbread

SwastikAcharya said:
ROM OS Version: 2.3.x Gingerbread
Click to expand...
Click to collapse
you know its nougat right

Sooo nice.
I'm testing on my Mi3 with a data-only SIM card. Having done experimental->23 nightly->30 nightly
Till now I haven't found bugs, just some lags.
No themes, but I can live without
I know I can't say anything about calls, BT issues and so on, but LineageOS just made my Mi3 "new" again

Found bug on audio fx, its so disturbing me -_- i want a pure lineage os, not custom equalizer

SwastikAcharya said:
ROM OS Version: 2.3.x Gingerbread
Click to expand...
Click to collapse
lol... Don't know how many days it will be there in the thread! @linuxxxx don't really look in the thread much.

Any chance this ROM suppory LTE mode switch preference in the setting?

help requested.
struck at
detected filesystem ext4 for /dev/block/bootdevice/by-name/system

sunil_defy said:
help requested.
struck at
detected filesystem ext4 for /dev/block/bootdevice/by-name/system
Click to expand...
Click to collapse
It took ~10 mins for me and then worked. Initially I also though it is stuck but finally loaded.

Yeah same here

sunil_defy said:
help requested.
struck at
detected filesystem ext4 for /dev/block/bootdevice/by-name/system
Click to expand...
Click to collapse
Yes, this happens to me as well. It's kinda misleading BUT behind the scene it is running alright. It took a while to finish (there is not even a success message being shown). Just continue to flash GApps or reboot to system when its done. Should be fine. It works for me.

sunil_defy said:
help requested.
struck at
detected filesystem ext4 for /dev/block/bootdevice/by-name/system
Click to expand...
Click to collapse
The Flashing time took a lot (about 20-25 min) because all lineage os builds are signed with a key. That's why
So please wait patiently and enjoy lineage os.

Excellent build. Good battery life
1. Wallpaper scroll doesn't work
2. Bluetooth telephony didn't work
3. Browser closes sudenly

is there a fix for battery counter dropping drastically after a reboot. Otherwise extremely happy with the ROM .

xdarkstar said:
It's there a fix for battery counter dropping drastically after a reboot. Otherwise extremely happy with the ROM .
Click to expand...
Click to collapse
As of now i don't think so ..I asked shivam sir and he was also unable to find the reason:crying:This problem is the reason I am not using any LOS Roms and using AOSP roms instead

reality1234 said:
As of now i don't think so ..I asked shivam sir and he was also unable to find the reason:crying:This problem is the reason I am not using any LOS Roms and using AOSP roms instead
Click to expand...
Click to collapse
Same reason here + ZX kernel

[ROM][Official][Weekly] LineageOS 14.1 for OnePlus 3/3T

LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Important information:
This thread is for official LineageOS 14.1 builds for OnePlus 3/3T. The following will not be supported here:
Custom kernels
Mods
Xposed
We don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
Known bugs:
Front camera is buggy, due to the buggy camera HAL
Installation:
First time flashing LineageOS 14.1 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery (See #2 for details)
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash LineageOS
Optional: Install the Google Apps addon package, install the SU addon package(https://download.lineageos.org/extras, choose arm64)
Reboot
A video guide by @ashokmor007
Source code:
https://github.com/lineageos
Credits:
LineageOS Team & Contributors
Code Aurora Forum
......
Download:
https://download.lineageos.org/oneplus3
[/LIST]
XDA:DevDB Information
LineageOS, ROM for the OnePlus 3T
Contributors
dianlujitao, Grarak
Source Code: https://github.com/lineageos
ROM OS Version: 7.x Nougat
Version Information
Status: Nightly
Created 2017-02-08
Last Updated 2017-02-16

Please relocate to https://forum.xda-developers.com/oneplus-3/development/rom-cyanogenmod-14-1-oneplus-3-t3496850 @ OnePlus 3 & 3T Cross Device Development

Release note:
New builds (after 2017/1/15) uses F2FS backported from 4.10 kernel, you may meet compatibility problems such as deadlocks, if you do, flash TWRP provided in OP and choose "Wipe -> Format Data" to format(not just wipe) your /data partition, this will clean the entire /data partition, including the emulated sdcard, so don't forget to backup your data before. After that, your data partition will be formatted into ext4, if you want to keep using f2fs, just convert fs type normally in TWRP.
For oneplus3, my unofficial TWRP is recommended, as it's what I use. For 3T, TWRP 3.0.4 is recommended.
20170120 build includes sdcardfs, security fixes and camera fixes&improvements, touch to focus is fixed as well, if it's still not working, clean Snap's data. BTW N kernel source is released now, I'll take days to bring up, don't ask for ETA.
Regarding installation, we recommend that users wipe when switching to LineageOS, and reinstall their gapps. However, we recognize that this can be time consuming, so we are offering an EXPERIMENTAL (read as, if it fails, you’ll have to wipe anyways) solution. Visit http://lineageos.org/Update-and-Build-Prep/for more details
Started from lineage-14.1-20170207-nightly-oneplus3-signed.zip, we provide unified builds for both 3&3T, and you need to install certain firmware to pass the TrustZone assertion. Currently they're the OxygenOS 4.0.2 ones. As oneplus won't update them every time new OTAs are rolling out, firmware from other versions might also pass the assertion.
FAQs:
My status bar quick pulldown and notification slider are broken, why?
See https://github.com/opengapps/opengapps/wiki/Notes-for-CMSetupWizard
Why the builds are unified?
Tell me the difference between OnePlus3Oxygen_16_OTA_039_all_1701140133_03b794d8a8b44883 and OnePlus3TOxygen_28_OTA_039_all_1701140132_de9036f11e2246a8, why not?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I'm really excited that Lineage OS has been released officialy for our 3T
Just one small question
Do OTAs work?
Thanks

I tried the front camera, and actually it's working nice. (Snap Camera)
By the way, great ROM and glad to see it on 3T!

subscribed
question
dm-verity and forced encryption disabler still needed ?

So is this official official official? Lol. I ask because there are so many official and unofficial of everything on this one plus Fred that I am overwhelmed and confused at times

poor2rican1 said:
So is this official official official? Lol. I ask because there are so many official and unofficial of everything on this one plus Fred that I am overwhelmed and confused at times
Click to expand...
Click to collapse
Yes, it is. As you can see, in the first post there is the LineageOS official download page.
EDIT: @dianlujitao There is an error in the first post, in the disclaimer. Warranty is still valid.

Sweet ty

xpissio said:
I tried the front camera, and actually it's working nice. (Snap Camera)
By the way, great ROM and glad to see it on 3T!
Click to expand...
Click to collapse
Front camera is working?
And also what about OTA?

The download link refers to the OnePlus 3 download page, not the OnePlus 3T. Where can I find the downloads for the 3T?

Will the OIS and EIS work?

bmxje said:
The download link refers to the OnePlus 3 download page, not the OnePlus 3T. Where can I find the downloads for the 3T?
Click to expand...
Click to collapse
The link is correct. The zip file works for both - the OP3 and the OP3T. It's unified

Reeb_Lam said:
Front camera is working?
And also what about OTA?
Click to expand...
Click to collapse
I wrote "It's working nice".... So, yes, it works.
I can't try OTA because... there's not a new build.

xpissio said:
I wrote "It's working nice".... So, yes, it works.
I can't try OTA because... there's not a new build.
Click to expand...
Click to collapse
Lol

Good evening possible another link because impossible to download the source thank you
edit: resolved

Thanks a lot for this! Working good!
Waiting for notification slider and front camera fix. And will give donation later ^_^

Finger reader not working very well when charging
Thanks for very good working!

Live Display (automatic) not working here.
EDIT: Rebooted and now it works.
Inviato dal mio ONEPLUS A3003 utilizzando Tapatalk

I am trying to switch to the official LOS nightly from 07 Feb, coming from this unofficial rom which worked perfectly: https://forum.xda-developers.com/oneplus-3t/development/rom-unified-lineageos-cm14-1-t3525551
I did a clean install, flashed twrp 3.0.4-1, then the dm-verity and forced encryption disabler zip (version 5.1), then the LOS build, open-gapps nano package (from 8th of Feb) and the LOS root addon.
Tried numerous times now, and different things: formatting data as ext4, flashing the OOS before doing the clean install, pico instead of nano gapps. Yet the same thing keeps happening to me:
Everything works fine first, yet after encrypting the phone and turning privacy guard on and to quite strict settings for google services, the phone freezes after entering the SIM pin-code during boot. Won't start anymore at all after that.
Tried again today without encrypting the phone and just turning on privacy guard for all services starting with "Google ...", whereas I selected ask everytime rather than denied. Same thing happened, so I believe now it is a Gapps related issue.
I am now back on the abovementioned unofficial build, which works just fine with exactly the same set-up which leaves me puzzled as this build is supposed to be 99,99% pure LOS.
As some people are reporting the nightly is working fine for them: am I doing something wrong? Is anybody else having similar issue? Anybody have an idea how to fix it?
Thanks in advance for any help, well appreciated!

[ROM][OFFICIAL][gts4lvwifi][10] LineageOS 17.1

-- bit more friendly stock -> lineage instructions --
1. Unlock the bootloader
- Connect to WiFi network
- Enable OEM Unlock in developer options
- Turn off the tablet
- Boot to download mode manually by plugging in USB and holding all the buttons for few seconds
- Follow instructions on the screen
2. Connect to WiFi network and make sure OEM Unlock in developer options is still checked
3. Flash custom VBMeta image ( https://dl.twrp.me/gts4lvwifi/vbmeta.tar.html ) in Odin ( use AP slot )
4. After flashing VBMeta, boot to stock. It'll likely ask you to wipe data, if so do that
5. Connect to WiFi network and make sure OEM Unlock in developer options is still checked
6. Now you can flash TWRP ( https://dl.twrp.me/gts4lvwifi ) in Odin ( use AP slot once again ), for convenience you can hold volume up while flashing it so that you boot to recovery right after it's flashed
7. Install Lineage × whatever else you need ( gapps, addon-su, ... )
8. Format data
9. Reboot ( make sure to not install TWRP app when TWRP asks you to )
---
Also Odin download for those who can't find it on their own https://build.nethunter.com/samsung-tools/Odin_3.13.1.zip
( sha1sum 1057496afa34bfdf7e77caf0b99207dca77fcb2d )

Builds 20200824+ depend on Android 10 firmware, and thus from now on the recovery will abort the installation if you're still on Android 9 one.
You can update the firmware by flashing following Odin package: https://github.com/luk1337/gts4lv-fw/releases/tag/T720XXS2CUA3.
After the firmware update you should be able to flash newer builds.

Well.. that was faster than expected. Thank you very much for your dedication.
Which gapps are you currently using or recommending? Opengapps doesn't seem to have gapps for 10 yet.
Also any special instructions for flashing when coming from your previous los16 rom?

LuK1337 said:
LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions :
Download the latest build and gapps
Reboot to recovery
Flash the latest build and gapps
Reboot
Downloads :
Builds :
https://www.androidfilehost.com/?w=files&flid=299579
http://downloads.codefi.re/jdcteam/luk/lineage-17_0/gts4lvwifi
https://sourceforge.net/projects/luk-lineageos/files/gts4lvwifi/lineage-17.0
Reporting Bugs
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
Code:
What is your--
LineageOS version:
LineageOS Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
XDA:DevDB Information
[ROM][UNOFFICIAL][gts4lvwifi][10] LineageOS 17.0, ROM for the Samsung Galaxy Tab S5e
Contributors
LuK1337
Source Code: https://github.com/LineageOS
ROM OS Version: Windows 8 Mobile
Version Information
Status: Testing
Created 2019-09-24
Last Updated 2019-09-24
Click to expand...
Click to collapse
Wow!!!! Thanks op!

andre0005 said:
Well.. that was faster than expected. Thank you very much for your dedication.
Which gapps are you currently using or recommending? Opengapps doesn't seem to have gapps for 10 yet.
Also any special instructions for flashing when coming from your previous los16 rom?
Click to expand...
Click to collapse
Apparently https://sourceforge.net/projects/opengapps/files/arm64/beta/ works.

I had the opportunity to test the image yesterday as kind of a preview. After killing the setup wizzard, it worked really great. The switch from LOS 16 to 17 was easy.
Rooting had to be done with magisk (current stable was fine) as Luk told me that superSU probably won't work.
I eventually reverted to LOS 16 mainly because of personal discomfort. No Trebuchet, some settings dialogues not (yet) ported and Titanium Backup did not work (there were no buttons displayed - could not even press the problems? button as it was not there ). I personally decided to wait a bit until I will return to LOS 17 on that device.

That was fast. You got me

inka$$o said:
I had the opportunity to test the image yesterday as kind of a preview. After killing the setup wizzard, it worked really great. The switch from LOS 16 to 17 was easy.
Rooting had to be done with magisk (current stable was fine) as Luk told me that superSU probably won't work.
I eventually reverted to LOS 16 mainly because of personal discomfort. No Trebuchet, some settings dialogues not (yet) ported and Titanium Backup did not work (there were no buttons displayed - could not even press the problems? button as it was not there ). I personally decided to wait a bit until I will return to LOS 17 on that device.
Click to expand...
Click to collapse
Did you perform a full wipe before flashing?
Also how did you 'kill' the setup wizard?

There is an issue with twrp decrypting storage on Los 17. Is this more than likely a twrp issue?
I also can't install apps, probably because no access to SD card.

suzook said:
There is an issue with twrp decrypting storage on Los 17. Is this more than likely a twrp issue?
Click to expand...
Click to collapse
TWRP issue.

LuK1337 said:
TWRP issue.
Click to expand...
Click to collapse
Apps won't install from play store also
Unfortunately I can't download anything, since SD card is encrypted. Guess I will go back to Los 16. Thanks anyway op.

suzook said:
Apps won't install from play store also
Unfortunately I can't download anything, since SD card is encrypted. Guess I will go back to Los 16. Thanks anyway op.
Click to expand...
Click to collapse
>Apps won't install from play store also
Format data; reboot and they should install fine now.

LuK1337 said:
>Apps won't install from play store also
Format data; reboot and they should install fine now.
Click to expand...
Click to collapse
Will give it a shot.

andre0005 said:
Did you perform a full wipe before flashing?
Also how did you 'kill' the setup wizard?
Click to expand...
Click to collapse
I started with my device running LOS16 already. If you're coming from stock, you should stick to the instructions for the LOS16 installation in the other thread - just use instead of LOS16 image the LOS17 image.
If you have already LOS16 on the device:
-> Boot to Recovery
-> install LOS 17 image
-> if desired stable Magisk for rooting
-> if desired these openGAPPS (was told to use them - they worked fine)
-> FORMAT data (wipe doesn't do the trick, as it doesn't do it when installing LOS 16)
After facing the problem with the setup wizzard I was told to simply delete it.
Boot to Recovery, mount system partition and open the terminal.
The command is:
rm -rf /system/priv-app/SetupWizard
After that, the wizard is gone and you can boot to system. You'll have to manually go through the settings to set up everything though.

Are there any launchers other than the included that work with the new gesture navigation?

andre0005 said:
Are there any launchers other than the included that work with the new gesture navigation?
Click to expand...
Click to collapse
No.

OK, got it set up properly with the format data. Just a couple things. Black theme doesn't work, and immersive mode force crashes settings app when trying to access it. Not complaining, just letting you know.

suzook said:
OK, got it set up properly with the format data. Just a couple things. Black theme doesn't work, and immersive mode force crashes settings app when trying to access it. Not complaining, just letting you know.
Click to expand...
Click to collapse
Use a standalone dark theme toggle, not 'Style' one.

@LuK1337 Thanks a lot for the build. Time to buy the Tablet.
One Question:
 @LuK1337 or anyone, are the corners rounded like that of the stock ROM or are the corners sharp?

[OFFICIAL] [Ten] Lineage 17.1

Reserved
Unofficial builds deleted on April 2nd 2020

Reserved

Hmm

was eagerly waiting for lineage 17 update, downloading,thanks so much dev, let's hope we'll get an official update soon

Huge thanks to the developer, very exciting to have Android 10 up and running on my device, with encryption in place!
PS: I couldn't get the beta version of Open GApps to flash in TWRP - It complained about a missing file in the ROM - I didn't make a note of what it said but I tried BitGApps instead and that worked fine: https://bitgapps.cf/arm64/Q/

P650SE said:
Huge thanks to the developer, very exciting to have Android 10 up and running on my device, with encryption in place!
PS: I couldn't get the beta version of Open GApps to flash in TWRP - It complained about a missing file in the ROM - I didn't make a note of what it said but I tried BitGApps instead and that worked fine: https://bitgapps.cf/arm64/Q/
Click to expand...
Click to collapse
The 20200115 gapps beta build was the problem. The next beta gapps should have it fixed.

so far very stable, everything works fine,the ui is almost perfectly smooth,but sometimes an app takes a milliseconds to get that opening animation running,lineage 16 is perfect in that ,when you tap an app it instantly responded,it needs a little work,but msn is it the best 10 rom out there,smoothest , lineage is the best

Thanks for the rom!
I'm having some issues...
1 - unable to hide apps in trebuchet
2 - unable to expand desktop
For now, only it.. if i found something i will update the reply...

I have an update about the problem I and another user reported in the TG group, where pictures and music were not appearing in the stock apps in Lineage 17 - After a couple of days of using this ROM my pictures and music have randomly started to appear in the stock apps. For some reason it took a few days for them to show up!

P650SE said:
I have an update about the problem I and another user reported in the TG group, where pictures and music were not appearing in the stock apps in Lineage 17 - After a couple of days of using this ROM my pictures and music have randomly started to appear in the stock apps. For some reason it took a few days for them to show up!
Click to expand...
Click to collapse
media scanner was not running,just download 7zipper and run media scanner

I don't see adaptive battery in the settings

Brilliant Rom. Very fast and very good battery. I like him.

Anybody tried any sound mods on this rom...i got bootloop from vuper4android.

redchilis said:
Excellent!
Noticeable changes at first glance:
- Accent color has been replaced by Styles and Wallpaper - Very Cool
- Dark mode toggle in Display
- Option to allow apps to use location only when app is being used (very iOS like and privacy friendly)
- In TWRP on mounting system, LOS apps like AudioFX seem to be in /system/system/priv-app earlier used to be in /system/priv-app
- Encryption works fine
Bugs
- Adding alarm, crashes the clock app
- Changing notification in any app (Signal, Whatsapp) crashes app
Did a clean install using
lineage-17.1-20200114-UNOFFICIAL-z2_plus.zip
open_gapps-arm64-10.0-pico-20200131.zip
Click to expand...
Click to collapse
Is there a way to remove unwanted system apps. When i remove app using link2sd app i got a bootloop.

Can GSI's be flashed on this ROM...??

redchilis said:
Based on this article, "devices" are GSI flashable or not and not ROM's
Based on this list of GSI flashable devices, I'd say the Zuk Z2 Plus isn't GSI flashable ASAIK
I could be wrong, just did a Google search.
Click to expand...
Click to collapse
But, I've flashed many GSI's successfully... So z2 plus is a GSI flashable.
And to flash any GSI we need a proper treble rom(with a good vendor which actually supports flashing any GSI..)..AFAIK

I'm not sure whether it's a bug or not. I tried the new internal audio recording feature of Android 10 with com.kimcy929.screenrecorder, it's not working, nothing but silence was recorded.
Edit: It's working with the browser (with slight lags though). However, it didn't work while playing sound with the built-in file manager.

manashz1 said:
media scanner was not running,just download 7zipper and run media scanner
Click to expand...
Click to collapse
Bruh that PE dev damaged gis phone now give me a solution

LineageOS 17.1 official released
https://download.lineageos.org/z2_plus
note: removed

[ROM][OFFICIAL] LineageOS 20 for Galaxy S10e/S10/S10+/S10 5G Exynos

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 13, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
Follow the instructions on the wiki page for your device https://wiki.lineageos.org/devices/#samsung
Only the provided lineage recovery will be supported, using TWRP might result in a possible data loss!
Note: You may use Odin instead of Heimdall, for this you will need to rename the recovery image to recovery.img and pack it into a tar archive.
Downloads:
Builds: https://download.lineageos.org
Firmware: Included in the build
GApps: https://wiki.lineageos.org/gapps.html
Reporting Bugs
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
Code:
What is your--
LineageOS version:
LineageOS Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
Support
Telegram group
Contributors
Linux4
Source Code: https://github.com/LineageOS
Kernel source: https://github.com/LineageOS/android_kernel_samsung_exynos9820
LineageOS is a free, community built, aftermarket firmware distribution of Android 11, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
Follow the instructions on the wiki page for your device https://wiki.lineageos.org/devices/#samsung
Only the provided lineage recovery will be supported, using TWRP might result in a possible data loss!
Note: You may use Odin instead of Heimdall, for this you will need to rename the recovery image to recovery.img and pack it into a tar archive.
Downloads:
Builds: https://download.lineageos.org
GApps: https://wiki.lineageos.org/gapps.html
Reporting Bugs
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
Code:
What is your--
LineageOS version:
LineageOS Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
Support
Telegram group
Contributors
Linux4
Source Code: https://github.com/LineageOS
Kernel source: https://github.com/LineageOS/android_kernel_samsung_exynos9820

reserved

reserved

Finally, nice to see official rom, is volte and vowifi supported

I've been on this since it first showed up on the lineage site and it's rock solid. Thanks for keeping our devices relevant!

alexdonwarez said:
Finally, nice to see official rom, is volte and vowifi supported
Click to expand...
Click to collapse
afaik both depends on samsung's proprietary stuff and no AOSP ROM has it.

I am interested in some features, namely double tap to sleep, tap to wake, raise to wake, and a fully working cam. Could you give me some info on these?
Thanks a lot!

sjeps said:
I am interested in some features, namely double tap to sleep, tap to wake, raise to wake, and a fully working cam. Could you give me some info on these?
Thanks a lot!
Click to expand...
Click to collapse
Dt2s - yes
T2w - yes
R2w - not afaik
Cam works fine, but I prefer gcam.

Thanks a lot for the reply!
Regarding the camera, I found that with some other ROMs the camera stutters during the shooting, and also the slow-motion isn't working at all
This is true for Gcam as well (in other roms)
The only stable camera I found is the stock one, e.g. in OneUi 5 adapted ROM
d3viou5 said:
Dt2s - yes
T2w - yes
R2w - not afaik
Cam works fine, but I prefer gcam.
Click to expand...
Click to collapse

sjeps said:
Thanks a lot for the reply!
Regarding the camera, I found that with some other ROMs the camera stutters during the shooting, and also the slow-motion isn't working at all
This is true for Gcam as well (in other roms)
The only stable camera I found is the stock one, e.g. in OneUi 5 adapted ROM
Click to expand...
Click to collapse
I'm using:
MGC_8.1.101_A9_GV2b_ruler.apk
No stuttering and slow motion (both speeds) works fine.
Worst case is some blown out highlights look neon blue, but this is rare. I think that may be a gcam processing issue over anything else.

thanks for developing OS 20 for S10, moved from os 19 recently, everything works ok but a bit disappointed to see that calls volume and notifications volume are combined, impossible to set volume level separately (as was in OS 19), any chance to change this in the future?

Hi,
I'm trying to upgrade my S10 beyond1lte from 19.1 to 20, but I have errors during installation and /vendor partition seams to be corrupted after installation (impossible to mount /vendor) :
I've tried to manualy decompress and comvert to img vendor.new.dat.br which is in lineage-20.0-2023MMDD-nightly-beyond1lte-signed.zip, but there is a probleme to open img (file corrupted ?).
When I took an other lineage zip (ie lineage-20.0-20230612-nightly-starlte-signed.zip for starlte), there is no problem to decompress, convert and open vendor.img.
Can you please verify vendor image which is in lineage-20.0-2023MMDD-nightly-beyond1lte-signed.zip (problem present for all zip available in download) ?
Thanks

A huge thanks to @Linux4 and the LOS team! I've been using it for a week and it's great, as usual

Hi.
I would like to see the changelog, but the link doesn't work.

[email protected] said:
Hi.
I would like to see the changelog, but the link doesn't work.
Click to expand...
Click to collapse
LineageOS 20.0 Changelog
LineageOS 20.0 Changelog. This page is listing the official changes and downloads for LineageOS 20.0 (Android 13 13).
www.lineageoslog.com

Develop Bugs

welcome