So I was watching this item for $18.99 for quite some time. I recieved a $25 Amazon Card for Christmas...to my surprise I found this case was now listed at $9..99 so I decide to get the car vent magnets as well ($6.99.)
Case
https://www.amazon.com/gp/product/B01M25X7TI/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Magnet
https://www.amazon.com/gp/product/B01M25X7TI/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
The case seems built very well. It does add some width, a little mass, but my no means does it turn the phone into a "brick" (pun intended.)It easily holds 3 cards; my license, my pistol permit, and my debit card (inside its protective sleeve...case is magnetic, just in case.) I actually like the look and feel and practicality of not needing to carry a wallet. So far, so good. I haven't driven with it magnetically attached to air vent clip so I can offer no opinion of the holding ability...some Amazon reviewers suggested purchasing a second magnets. All in all, I'd say this is a pretty good value.
I am intrigued by this case but your link for the magnet went to the information for the phone. Which magnetic vent mount did you use?
Hagbard57 said:
I am intrigued by this case but your link for the magnet went to the information for the phone. Which magnetic vent mount did you use?
Click to expand...
Click to collapse
Sorry... Here it is... Also after a full day....I really like this case!
https://www.amazon.com/Vena-Universal-Magnetic-Aluminum-Smartphones/dp/B01GW4GOUW
Sent from my LG-H918 using Tapatalk
Sweet! Thank you for the info. Just placed an order for the case and CD Slot Holder. If the CD Slot holder doesn't work I will switch to Vent case. Very interested to see how this works out.
joeygee23 said:
Sorry... Here it is... Also after a full day....I really like this case!
https://www.amazon.com/Vena-Universal-Magnetic-Aluminum-Smartphones/dp/B01GW4GOUW
Sent from my LG-H918 using Tapatalk
Click to expand...
Click to collapse
Hagbard57 said:
Sweet! Thank you for the info. Just placed an order for the case and CD Slot Holder. If the CD Slot holder doesn't work I will switch to Vent case. Very interested to see how this works out.
Click to expand...
Click to collapse
Case awesome!!... Single vent magnet held well on maiden voyage!
Sent from my LG-H918 using Tapatalk
So the magnet didn't bother your credit card magnetic strip?
Sent from my LG-H918 using Tapatalk
Pick_A_Name said:
So the magnet didn't bother your credit card magnetic strip?
Sent from my LG-H918 using Tapatalk
Click to expand...
Click to collapse
There's a rubber type lining...I kept my debit card in its paper sleeve just in case. Comment section on Amazon says no problems...
Sent from my LG-H918 using Tapatalk
Hagbard57 said:
Sweet! Thank you for the info. Just placed an order for the case and CD Slot Holder. If the CD Slot holder doesn't work I will switch to Vent case. Very interested to see how this works out.
Click to expand...
Click to collapse
Did you get yours yet?
Sent from my LG-H918 using Tapatalk
Sadly, it does not work with a Verizon branded LG V20, as there is no way to disable a so called Quick Case setting on a Verizon branded device.
inkdesigner said:
Sadly, it does not work with a Verizon branded LG V20, as there is no way to disable a so called Quick Case setting on a Verizon branded device.
Click to expand...
Click to collapse
That's too bad. I absolutely love it. Maybe you could try this one, which I'm planning to order very soon...
http://zoarah.com/matchnine-cardla-...amsung-galaxy-note-7-clone.html#/product/3236
Sent from my LG-H918 using Tapatalk
joeygee23 said:
Did you get yours yet?
Sent from my LG-H918 using Tapatalk
Click to expand...
Click to collapse
I did, I like the case but I love the CD Mount even better. Very non-obtrusive build and the magnet holds very well. I have put the including disc in my other case and I use them interchangeably.
Would definitely recommend both!
I bought the magnet, works amazing.
I used both of the metal plates that came with it because I use a case.
I have this case and I use it with a dashboard magnet mount that I found @ Marshalls. the case holds awesome over bumps and flying around in my car.
As for the case itself, Its been great so far. It makes it a little bulkier but I like it cause it makes it easier to handle. It is the best card case that I have found so far not counting any of those wallet cases.
The only thing I wish was that it was a little gripper than the material used.
It has a raised bevel so it doesnt lay flat on the screen and same with the rear camera for protection.
There are no covers for the ports except for the volume buttons.
It fits 3 cards snugly even if all 3 cards have raised numbers. The cards are easy to get out too as it has a little slope which makes it easier to slide the cards out. I usually carry drivers license and debit card while switching out the 3rd with either cash or a gift card. It's great not having to carry a wallet anymore.
Using a magnet mount in a vehicle is a lot easier than using the other kinds where you have to release the clamps or something.
I use it daily any time I'm driving and I have never had it fall off the mount although I have had the mount itself become unstuck from my dashboard but it was only twice when I didnt have it seated properly.
Related
Hi guys, I just picked up the ARKON SM515 mount for my GS3 and I love it. I think it was $16 on amazon. (link to their site http://www.arkon.com/Galaxy S III/slimgrip-galaxy-s-3-mini-windshield-car-mount.html ) They also have one called the AP515 which is for the iphone and its a few bucks cheaper but I just don't know if the GS3 will fit. The SM514 is similar to the 515 but it's a tiny bit bigger due to the adjustable arm (another great one to consider if you have the room for it) Anyway I mounted in a weird spot near my radio on the center of the dashboard. It can swivel in almost any direction which is cool and it's holding on tight. You can adjust the feet that hold the phone and they have rubber padding that way they won't scratch anything. I mounted mine using the included dashboard sticky pad. Here's a few pics taken with my bionic. (not the best camera)
p.s. In case any of you are wonder i'm using the Fosmon TPU + clear back case from amazon. It's around 6 bucks.
Deffinately thinking I'll order one. Been wanting a good mount for my car witht he new phone.
Arkon makes some FANTASTIC products - glad to know they didn't skimp out on the S3.
I bought the bad boy.
http://www.arkon.com/Galaxy S III/slimgrip-galaxy-s-3-car-floor-mount.html
I hate using AC and window mounts. This can sit right in between my e-brake and driver seat.
That's the exact mount I have in my car. I originally bought it for my Nook Color, but it also fits the S3 perfectly. Nice strong hold.
Sent from my SGH-T999 using Tapatalk 2
How removable is the dashboard sticky pad? Would it leave behind any gunk when taking it off? And how easy is it to take off/put on. Thanks.
Tryptonite said:
How removable is the dashboard sticky pad? Would it leave behind any gunk when taking it off? And how easy is it to take off/put on. Thanks.
Click to expand...
Click to collapse
Taking the phone off the mount is pretty easy but this thing does hold it pretty firmly in place. I don't know how easy The 3M sticky pad will come off as it feels pretty solid on there. In my case my dash is plastic so it should come off pretty easily (but not too easy I hope) . You may want to contact their customer service and see what they say about it
sebastianraven said:
I bought the bad boy.
http://www.arkon.com/Galaxy S III/slimgrip-galaxy-s-3-car-floor-mount.html
I hate using AC and window mounts. This can sit right in between my e-brake and driver seat.
Click to expand...
Click to collapse
That looks awesome.
Check out Mountek CD slot mount.
http://www.amazon.com/gp/aw/d/B004E5W3D4/ref=mp_s_a_1?qid=1342158086&sr=8-1
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Paging Dr B said:
Hi guys, I just picked up the ARKON SM515 mount for my GS3 and I love it. I think it was $16 on amazon. (link to their site http://www.arkon.com/Galaxy S III/slimgrip-galaxy-s-3-mini-windshield-car-mount.html ) They also have one called the AP515 which is for the iphone and its a few bucks cheaper but I just don't know if the GS3 will fit. The SM514 is similar to the 515 but it's a tiny bit bigger due to the adjustable arm (another great one to consider if you have the room for it) Anyway I mounted in a weird spot near my radio on the center of the dashboard. It can swivel in almost any direction which is cool and it's holding on tight. You can adjust the feet that hold the phone and they have rubber padding that way they won't scratch anything. I mounted mine using the included dashboard sticky pad. Here's a few pics taken with my bionic. (not the best camera)
p.s. In case any of you are wonder i'm using the Fosmon TPU + clear back case from amazon. It's around 6 bucks.
Click to expand...
Click to collapse
thanks for this. i've been looking for a good vehicle mount for a while
Im looking for something like this but with shorter neck.
For you guys that don't like windshield mounts, I've used the "sticky" Arkon mount. It works pretty well. I like the Mobile Grip, but if you use a big case like an otterbox, you'll probably be better off with the slim-grip, that thing will hold anything.
Mobile Grip: http://www.arkon.com/Galaxy S III/mobile-grip-galaxy-s-3-car-mount.html
Slim-Grip: http://www.arkon.com/Galaxy S III/slimgrip-galaxy-s-3-car-mount.html
sebastianraven said:
I bought the bad boy.
http://www.arkon.com/Galaxy S III/slimgrip-galaxy-s-3-car-floor-mount.html
I hate using AC and window mounts. This can sit right in between my e-brake and driver seat.
Click to expand...
Click to collapse
Looks interesting. Can you put up pictures/video when you get it installed? I'm wondering whether its long enough that you don't have to look down from the road too much to see the screen.
Shady Gambino said:
For you guys that don't like windshield mounts, I've used the "sticky" Arkon mount. It works pretty well. I like the Mobile Grip, but if you use a big case like an otterbox, you'll probably be better off with the slim-grip, that thing will hold anything.
Mobile Grip: http://www.arkon.com/Galaxy S III/mobile-grip-galaxy-s-3-car-mount.html
Slim-Grip: http://www.arkon.com/Galaxy S III/slimgrip-galaxy-s-3-car-mount.html
Click to expand...
Click to collapse
Yeah, their sticky mount is awesome!!! I just recently reviewed their Slim Grip Ultra with stick mount here on XDA: http://forum.xda-developers.com/showthread.php?t=2174449 - that mount works with ANY phone up to Note 2/Note 3 size and even 7"/8" tablets. Definitely recommend it.
go
good
Hi!
I've bought a new bumper (SPG Spigen Ultra Lumi Bumper).
Now I need a new car mount, because my old one does not fit with the bumper.
Any suggestions for new car cradle?
greets
m8980
The ibolt car dock is great. Works with or without a case. Does not work with the defender.
Sent from my SPH-L710 using Tapatalk 2
i have the arkon car mount (the one with mega grip) it fits on the garmin ball mount so it's prefect for me. amazon sells it for 13 bucks or so...
Sent from my GT-I9300 using xda app-developers app
Just got the imagnet on Amazon and I'm loving it so far. Holds great even off road and works with my uag case.
There are many choices for you here http://dx.com/s/car+mount . pls read the review before you decide which one to buy. Hope it'll help you find a suitable one.
Matt1024 said:
Just got the imagnet on Amazon and I'm loving it so far. Holds great even off road and works with my uag case.
Click to expand...
Click to collapse
Indeed, I am using this one too and very happy with that.
Imagnet is the best. Still on sale for $19.99.
iMagnet Cradle-less Magnetic Mount with Quick-snap Technology, Smartphone Car Windshield Dashboard Universal Holder
http://www.amazon.com/dp/B008IOQ3K6/ref=cm_sw_r_an_am_ap_am_us?ie=UTF8
http://www.amazon.com/Mountek-nGroove-Universal-Mount-Black/dp/B004G1L52Q
mount tek cd mount it works on some cars, no need for suction cups and half of us ditch the cd players at this point.
lcrazyaznl said:
http://www.amazon.com/Mountek-nGroove-Universal-Mount-Black/dp/B004G1L52Q
mount tek cd mount it works on some cars, no need for suction cups and half of us ditch the cd players at this point.
Click to expand...
Click to collapse
This is what I use too. Very unique design and works great.
Matt1024 said:
Just got the imagnet on Amazon and I'm loving it so far. Holds great even off road and works with my uag case.
Click to expand...
Click to collapse
How thick are the adhesive plates protruding from the case? can you post a pic?
Its about 5 sheets of copier paper. Very thin. A lot thinner than a credit card.
http://forum.xda-developers.com/showthread.php?t=1968549
I've been using the iOttie one touch mount. There's a newer one that just came out called the Easy Flex 2 but I've been using the original one called Easy One Touch. Best car mount I've used. There's a button on the dock plate that when pushed in the 2 arms grab onto the phone and it's pretty secure. To remove it just squeeze the 2 buttons on the side of the mount and the arms open up and the phone pops out.
It's not a powered dock so you have to plug in your adapter straight into the phone. Most times if my phone is fully charged I don't plug it in and it's a very clean look.
I keep an NFC sticker by the dock to turn on GPS and car mode so with this mount everything is just so quick. Check it out and let me know if you have any questions.
rebdogg said:
I've been using the iOttie one touch mount. There's a newer one that just came out called the Easy Flex 2 but I've been using the original one called Easy One Touch. Best car mount I've used. There's a button on the dock plate that when pushed in the 2 arms grab onto the phone and it's pretty secure. To remove it just squeeze the 2 buttons on the side of the mount and the arms open up and the phone pops out.
It's not a powered dock so you have to plug in your adapter straight into the phone. Most times if my phone is fully charged I don't plug it in and it's a very clean look.
I keep an NFC sticker by the dock to turn on GPS and car mode so with this mount everything is just so quick. Check it out and let me know if you have any questions.
Click to expand...
Click to collapse
I just bought this too, haven't got it yet, but it looks like a nice mount for sure.
(⊙＿⊙)
I found a cheaper version of the clingo mount http://dx.com/p/long-tube-car-stand-holder-for-iphone-samsung-htc-blackberry-black-156661 and ordered it to give it a try. Hopefully it'll be as sticky as the original and works with any case with smooth surface.
Recently, I've been getting annoyed with using my Kenu Airframe/Samsung Car Mount having to keep slipping on and off buttons or pushing my mount aside to slip in my phone.
So, I've been reading about the magnetic feature in order to activate the Car Mode/Desktop Mode on our Moto X. So I attempted to build a Magnetic Car Mount this weekend.
I realized that the Moto X itself had a metal band that would activate the Car Mode, however it wasn't strong enough to hold with my Magnet, so I had to place metal plate into a case and put the phone in, which that worked flawlessly. However, the metal plate bulged everywhere so the phone wasn't nice to hold anymore.
Luckily, my dad is a welder, and I worked on molding the metal plate with him, and decided I disliked my Diztronic Frost Case (On the side note, I liked the Matte Black Best). So, I decided to cut a piece out of my Diztronic case that fit with my metal plate. So now the plate curved with the case!
I inserted the metal plate into the cut out, glued it in place, and my roughly build case with a metal plate works like a charm with my Magnetic Mount setup with my Kenu Airframe. I gotta say it's one of the nicest things not to have to fiddle with anything and just take your phone off with a quick snap. This all cost me about $5 + $25 (Which is the Airframe). I'm ordering a new case and Mountek Metal Plating to reduce the thickness hoping that I won't have to cut an insert, but we'll see in the following days. I'll update it when I receive the plates.
I went autocrossing with my car, phone mounted my magnetic mount and at speeds and curves of 60-70 MPH, this thing stuck like glue!
Very pleased overall. Hopefully some of you guys will steer clear from the Griffin Dock for our phones and custom build your own mount
Can you post a pic of it in action?
Sent from my XT1080 using Tapatalk
1454 said:
Can you post a pic of it in action?
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
Here a few, sorry they are definitely blurry. Fairly tired for the night, tried to get a quick snaps in for an idea. Can't wait when I get my kit together to make everything look professional.
The Kenu can turn 360 degrees to fit whatever direction you'd like the magnet/a device to face. It's held on your air vent.
https://www.dropbox.com/sh/tmb0izdpeylz41u/cMXKcCgPcO
Kenichi said:
Here a few, sorry they are definitely blurry. Fairly tired for the night, tried to get a quick snaps in for an idea. Can't wait when I get my kit together to make everything look professional.
The Kenu can turn 360 degrees to fit whatever direction you'd like the magnet/a device to face. It's held on your air vent.
https://www.dropbox.com/sh/tmb0izdpeylz41u/cMXKcCgPcO
Click to expand...
Click to collapse
One more question. Any adverse effects from the magnet on the builtin compass or Navi? I've seen other places were people had issues with the magnet setups on those functions. Just wanted to see your thoughts.
Sent from my XT1080 using Tapatalk
1454 said:
One more question. Any adverse effects from the magnet on the builtin compass or Navi? I've seen other places were people had issues with the magnet setups on those functions. Just wanted to see your thoughts.
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
I use a digital speedometer/Navigation day to day, haven't had any negative affects that I've seen yet. Speedometer/GPS Speed is right on my Digital Odometer's value, so I can't say I have any issues yet. Let me know if you have any other questions! :laugh: Plus the location of my metal plate in the pictures taken, I am still able to do NFC!
Just got my parts in today for thinner pieces of metal, integrated it into a few of my cases. Plus, I made a new magnet. Quite fun!
Kenichi said:
I use a digital speedometer/Navigation day to day, haven't had any negative affects that I've seen yet. Speedometer/GPS Speed is right on my Digital Odometer's value, so I can't say I have any issues yet. Let me know if you have any other questions! :laugh: Plus the location of my metal plate in the pictures taken, I am still able to do NFC!
Just got my parts in today for thinner pieces of metal, integrated it into a few of my cases. Plus, I made a new magnet. Quite fun!
Click to expand...
Click to collapse
Thanks for all the answers and sharing. The community is great because of people like you.
Sent from my XT1080 using Tapatalk
1454 said:
Thanks for all the answers and sharing. The community is great because of people like you.
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
I have been using magnetic mounts since my OG Droid. It is nice to see Moto reverted back to magnetic activation of dock mode instead of their smartdocks. I have noticed Moto has switched the polarity of the magnet's activation of car/desk dock modes from the OG Droid. I have an RND dock at home that I glued a magnet to. It automatically activates Daydream when docked. My next project is modifying the RND dock to include HDMI out and USB OTG capability.
I was wondering if anyone had thoughts or has even tried these types of car mounts.
http://www.ebay.com/itm/Nexcon-Magn...lde-/221655676812?hash=item339bb5378c&vxp=mtr
Its magnetic so I was wondering if people thought our Nexus 5 would work with it without the metal plate they supply. Seeing as the Nexus 5 has magnets in it's back I would think the only question is if the magnets used are attracted to the ones in the Nexus 5 and the placement of the magnets. I may get one to try out but I wanted to see people's thoughts anyway.
Well as far as I am informed and seen, inside your nexus 5 are metal discs not magnets, the magnets comes in the original nexus 5 wireless charger. Hope this make it more clear, and I think they made it a bit vague so you would get it then they would simply tells you to get their magmatic cover !!!
ahmad shishani said:
Well as far as I am informed and seen, inside your nexus 5 are metal discs not magnets, the magnets comes in the original nexus 5 wireless charger. Hope this make it more clear, and I think they made it a bit vague so you would get it then they would simply tells you to get their magmatic cover !!!
Click to expand...
Click to collapse
I wasn't sure if inside the Nexus 5 are magnets or, as you say, metal disks. I know my old Palm Pre had magnets in the back of the phone for it's TouchStone charger. I actually have two of those. And the Nexus 5 actually connects with that really well. Almost like it was made for it. If these docks are similar to what the TouchStone charger is as far as magnet placement, it should work really well without that metal plate they give you. But the plate does come with it to use with a phone case just in case. So I may just put down the 10 bucks or so and see how it goes.
Cool let me know what turns out, I may kick one too off ebay
I have this one in my car http://www.amazon.com/InfiniApps-Smartphones-Cradle-less-Quick-snap-technology/dp/B00DPMNNUO/ref=sr_1_38?ie=UTF8&qid=1427845784&sr=8-38&keywords=magnetic+car+mount
It works very well, and the phone stays locked in place. It attaches to the 4 metal plates in the back cover of the Nexus 5 meant for the official Qi charger. You can't use a case though, or the magnets won't be strong enough to hold. If you do use a case (thin TPU or thin hard case only) then you will need the metal plate insert for it to work. But even still, the phone sticks way better without a case. It sticks best in vertical position, if you do landscape it needs to be centered perfectly or it will start to twist back to vertical over big bumps, it won't come off, but it will turn.
I use an nGroove Snap (http://www.amazon.com/Mountek-nGroove-Magnetic-Smartphones-Tablets/dp/B00HMDYH2U) and it works just fine even without the metal plate.
DosNexus said:
I have this one in my car http://www.amazon.com/InfiniApps-Smartphones-Cradle-less-Quick-snap-technology/dp/B00DPMNNUO/ref=sr_1_38?ie=UTF8&qid=1427845784&sr=8-38&keywords=magnetic+car+mount
It works very well, and the phone stays locked in place. It attaches to the 4 metal plates in the back cover of the Nexus 5 meant for the official Qi charger. You can't use a case though, or the magnets won't be strong enough to hold. If you do use a case (thin TPU or thin hard case only) then you will need the metal plate insert for it to work. But even still, the phone sticks way better without a case. It sticks best in vertical position, if you do landscape it needs to be centered perfectly or it will start to twist back to vertical over big bumps, it won't come off, but it will turn.
Click to expand...
Click to collapse
rpr69 said:
I use an nGroove Snap (http://www.amazon.com/Mountek-nGroove-Magnetic-Smartphones-Tablets/dp/B00HMDYH2U) and it works just fine even without the metal plate.
Click to expand...
Click to collapse
Good to know that these do in fact work without those metal plates. I thought they'd might but thanks for confirming it. I don't use a case so it should be perfect for me. I'll definitely be getting one now.
Made my own car charger. Too bad my Spigen case is too thick, so can't use it. Or I just have to risk breaking my phone by not using the case..... Dilemma...
I use kenu airframe + google Nexus qi charger = perfect solution.
I ended up buying this one and it works perfectly.
http://www.ebay.com/itm/381075023900?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT
Do you need to use the included magnetic stickers? Or will it lock to the magnets inside the phone?
JaymzTA said:
Do you need to use the included magnetic stickers? Or will it lock to the magnets inside the phone?
Click to expand...
Click to collapse
Nope. It works as is. And it works nicely too. If the next Nexus doesn't have magnets, I'm going to be sad.
I have another mount, I believe it's called "iMagnet" which is almost identical. After using it for the past year with my nexus 5, I have some gripes about it. It's not an incredibly solid grip, which means every bump is going to make your phone start rotating one way or the other. I like to place my phone in landscape mode but since it's in landscape mode, the phone will twist on the mount until it's touching the dash. I'll periodically move the phone back to the center of the mount while I'm driving which probably isn't safe. Ive used my phone with cases, without cases, with dbrand skins, without. The official Google "bumper" and my spigen neo hybrid are both too thick for the mount to have a good hold, so it really slides all over the place. Using a skin, doesn't affect it too much though. If I were to get another car mount I wouldn't get one of these. It's not horrible, but it just gets annoying.
Sent from my Nexus 5 using XDA Free mobile app
jsgraphicart said:
Nope. It works as is. And it works nicely too. If the next Nexus doesn't have magnets, I'm going to be sad.
Click to expand...
Click to collapse
On your recommendation I just ordered one from amazon
JaymzTA said:
On your recommendation I just ordered one from amazon
Click to expand...
Click to collapse
I think you'll be happy with it
I have one, and I love it. I've got one of the slim Spigen cases and I put one of the metal plates between the phone and the case. I had to play with the position to make sure I could still use NFC, Qi charging, and GPS worked fine.
Now I feel super confident in my purchase. Thanks guys!
I've been happy with this one from amazon http://www.amazon.com/gp/product/B00V54LQO4?psc=1&redirect=true&ref_=oh_aui_detailpage_o04_s00 only $10.99.
jsgraphicart said:
I think you'll be happy with it
Click to expand...
Click to collapse
I just received it in the mail, and the build quality seems pretty good. I just had neck surgery the other day, so I won't be able to use it for at least a few weeks. I can't wait to try it out!
Can anyone recommend a good car mount?
I just bought some cheesy magnetic thing from Amazon. Will be returning ASAP. Ideally, I think I'm looking for something that can clip into either the air vents or on the dash of my car. I realized there probably aren't many pixel specific accessories made yet, but maybe someone has had good success with a different model for an earlier phone?
Anyway just wondering what you all were planning on using.
I've been using a good magnetic mount for the CD slot in my car since the Nexus 5 days. I like the Koomus brand of them from Amazon.
Sent from my Pixel 2 XL using Tapatalk
I personally been using ProClip for a while. With my Nexus 6 I have a universal one since I have a thin case it slips in. Mounts are made per vehicle too.
https://www.proclipusa.com/category/google-pixel-2
Sent from my Nexus 6 using Tapatalk
I've had the third generation iOttie car mount for about a year, and it is excellent. It doesn't have a vent clip, but its suction cup mount is very sturdy. It even comes with a little pad you can use if your dash is textured.
I second the ProClip. You can get a custom mount for your vehicle, and select a separate holder. I've got a custom mount and a universal holder that can be adjusted if you switch phones.
I second the recommendations for iOttie mounts. I bought their wireless charging one back when I got my Galaxy S6, but I still use it with my Pixels because it is incredibly convenient to secure and remove the device. Excellent quality, usability, and adjustability, well worth the purchase.
coolsilver said:
I personally been using ProClip for a while. With my Nexus 6 I have a universal one since I have a thin case it slips in. Mounts are made per vehicle too.
https://www.proclipusa.com/category/google-pixel-2
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Looks like a solid product! I have an '09 Kia Spectra and the dash doesn't look like an easy place to put a phone mount. I checked out their custom mount for my car and the only drawback I can see is it completely covers a vent (for a/c) which may or may not be an issues, I won't know until mounted but.. Any experience with that for you?
Yea on my prior vehicle I had it cover the vent. It was out far enough so it still put out air but it wasn't really directional as far as flow as before. Center ones I didn't care as much about being pointed at me to keep cool. It was a solid bracket though
coolsilver said:
Yea on my prior vehicle I had it cover the vent. It was out far enough so it still put out air but it wasn't really directional as far as flow as before. Center ones I didn't care as much about being pointed at me to keep cool. It was a solid bracket though
Click to expand...
Click to collapse
Thanks! They do look solid ...
I have an existing car mount for my S7 before I got the XL, it holds the phone in landscape and squeezes the sides. Little concerned that this may not be good for the squeeze sensors. Anyone think it could affect the sensors over time?
I have this one since May 2016 no issues and easy off and on for various phones..I have vent but they make cd slot and I think window too
iOttie
https://www.amazon.com/gp/product/B017HME9DC/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Sent using Tapatalk
Haven't used these myself, but they look pretty sweet...https://www.amazon.com/dp/B01DCSIRG0/ref=cm_sw_r_cp_awdb_KmO7zbB7T3BNE
Anybody used this one before?
Cowbell_Guy said:
Can anyone recommend a good car mount?
I just bought some cheesy magnetic thing from Amazon. Will be returning ASAP. Ideally, I think I'm looking for something that can clip into either the air vents or on the dash of my car. I realized there probably aren't many pixel specific accessories made yet, but maybe someone has had good success with a different model for an earlier phone?
Anyway just wondering what you all were planning on using.
Click to expand...
Click to collapse
Another vote for Proclip's mounting solution. The universal large holder works fine with my Pixel 2 XL with a (Caseology Parallax) case. It's pricey but it works beautifully.
I just ordered the IOAuto magnet holder to use with Proclip's mounting bracket. I'm tired of sliding my phone into the holder. 1st world problems, I know.
Sent from my Pixel 2 XL using Tapatalk
morbidhippy said:
I just ordered the iOttie magnet holder to use with Proclip's mounting bracket. I'm tired of sliding my phone into the holder.
Click to expand...
Click to collapse
How does that work exactly? Which iOttie did you buy, and how does it work with the ProClip bracket?
dberthia said:
How does that work exactly? Which iOttie did you buy, and how does it work with the ProClip bracket?
Click to expand...
Click to collapse
Oops, I meant IOAuto, not iOttie.
https://www.proclipusa.com/product/...xkJK2QwbcDyiiZdeiDsdvqZtMoM3Vg84aAjDOEALw_wcB
I bought the IOAuto Pro. It attaches to the vehicle mount that I purchased previously from Proclip. It comes with small circular metal disks that should be attached to your phone.
I hate the thought of using adhesive to stick anything on my phone so I'm going to try and place the disk between the phone and my TPU case. In think the magnet will still work fine.
Check out YouTube. I've seen a couple of videos of others installing it.
Sent from my Pixel 2 XL using Tapatalk
I like this simple magnetic holder:
Techmatte MagGrip Orbit Universal Air Vent Magnetic Car Mount Holder
It requires a thin metal plate which works fine if you use a TPU case or other case that's not too thick on the back; this way, it doesn't require any permanent application. I bought 3 for family members, and a friend got one after seeing mine. It's easy to mount, secure, very simple in design - it uses a steel ball that mounts to an air vent, and a magnetic piece that connects to the ball, giving easy adjustment in all directions, or complete removal. This magnetic piece connects to the phone's steel plate. My wife has an iphone 6P which works well; I have a nexus 5X.
coolsilver said:
I personally been using ProClip for a while. With my Nexus 6 I have a universal one since I have a thin case it slips in. Mounts are made per vehicle too.
https://www.proclipusa.com/category/google-pixel-2
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Adding a :good: for the ProClip. Mine just came yesterday and works perfect.
morbidhippy said:
I hate the thought of using adhesive to stick anything on my phone so I'm going to try and place the disk between the phone and my TPU case. In think the magnet will still work fine.
Click to expand...
Click to collapse
I'm curious to see if that works out for you. I'm intrigued, but it seems like $50 is a bit steep for that mount. If it works well for you with a case, I may consider it though.
I know my solution isn't going to be for everyone, but it works well for my needs. I have a hybrid Proclip/Ram Mount solution. Proclip for the center dash mount, then Ram Mounts for the rest (ball, short arm, and X Grip holder). It's more involved than the common solutions, but it puts my phone right whereIi want it and it's rock solid--which is important for those track days.
As mentioned upthread, this does partially block the vent, but on my Mustang not by too much, and the passenger still gets air flow when it's directed their way. A bonus is the phone stays nice & cool when staying on playing podcasts while commuting, or running the telemetry apps while on track.
I can strongly recommend this one. They're a little pricey but I have them in my truck, car, 4-wheeler and mountain bike. Just the spring clips are strong and when you add the rubber sling it'll hold on to the phone almost no matter what. This one actually fits my P2XL better than my PXL. https://www.amazon.com/gp/product/B0066BWMNU/ref=oh_aui_search_detailpage?ie=UTF8&psc=1