Develop Bugs

[KERNEL] Bullet v2.9b [11/30/2011][OC,UV,BLN,OTG][FauxClock v0.9][Team Kang]

Team Kang Presents​
Bullet​
Standard Disclaimer - We are in no way responsible for what you do to your phone. If you destroy your $500 device and try and blame us we will laugh at you. Always read and ensure you know what you are doing before attempting anything***​
Features
OC up to 1.83GHz
BLN
Lagfree
OTG USB Support
OC 2d and 3d
BFQ
UV
init.d support
much more inside
Change Log
v2.9b
Ported JRCU (Joe's RCU)
Patched up to 2.6.35.14 from kernel.org
More general code updates and clean up
v2.7b
Back ported CFS Autogroup v2 (Thanks to faux123 for the help when I had a duh moment)
Removed CIQ
A few bug fixes and code updates
Clock speed and governor defaults are 384-1.67 lagfree and screen off 384-540
v2.2b
Added some UV across the entire Freq range
Tuned lagfree a little more for better battery life screen on and off
Tuned ondemand governor for better battery life screen on and off
NOTE
Please see the second post for a new Fauxclock built for Team Kang kernels. It's the only currently supported CPU settings app for this kernel.​
Voltage Control
You can control it via shell/init.d scripts as follows
[ to over volt ALL frequencies by 25000 uv (microvolts) ]
Code:
echo "+25000" > /sys/devices/system/cpu/cpufreq/vdd_table/vdd_levels
[ to under volt ALL frequencies by 25000 uv (microvolts) ]
Code:
echo "-25000" > /sys/devices/system/cpu/cpufreq/vdd_table/vdd_levels
[ to set a specific frequency (ie 1.18 GHz) with a specific voltage (ie 1.0875 volts) ]
Code:
echo "1188000 1087500" > /sys/devices/system/cpu/cpufreq/vdd_table/vdd_levels
Clock Control
Just about any OC app will work just fine(except system tuner). By default, the kernel sets the max frequency to the highest frequency available. You can change this by adding a few lines to an init.d script (or run commands in a shell).
For instance, setting stock freqs would look like this
Code:
(su if in shell)
echo 1836000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
Info
This kernel will boot to 1.67GHz with lagfree governor enabled. While there is the ability to run up to 1.83GHz in my opinion it's really not needed. With the changes made this kernel is smooth and fast. Battery life has proven to very close to stock with my usage time in the 20+ hour range. I hope you enjoy it!!
Thanks
These are great folks who work hard to better the Android experience!!
romanbb
Whitehawkx
faux123
morfic
Download
Download, Flash, and have fun!!
Bullet 1.8Ghz v2.9b
Bullet 1.8Ghz v2.7b
Bullet 1.8Ghz v2.2b

FauxClock v0.9
Thanks to romanbb for creating this great app!​
Now we can have out cake and eat it too. This app let's you set clock speed and overall VDD voltages. The really cool part is that the processor now works like it's supposed too. You'll notice in FauxClock that the second processor says offline. Well it's supposed to. Now the second cpu only gets powered on when load is high. Once load has stabilized the second cpu goes back offline. Now we can have speed and decent battery life. You'll notice that some bench mark apps will be lower ie CF-Bench. That's because it runs that benchmark with only one core active. Who really cares when your phone is smooth, fast, and lasts all day on a charge!
Download
FauxClock v0.9
System Tuner FAQ​I've been meaning to put this up but haven't had a chance. This FAQ should hold true for any kernel compiled for our phones and the Skyrocket.
When using System Tuner the first thing to do is make sure you can see all running processes in it's task manager. See image below:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now you're ready to start tweaking the kernel. You see anytime you make a change to the clock speed or governor that both core's come online and stay online. Go back to System Tuner's task manager and select "mpdecision" and kill it. See images below:
Now the second core should be offline and only come back online when needed. Using this method insures that both cores receive the changes you made. Now you won't have one core running lagfree and the other ondemand or a mix match of clock speeds. This really helps the stability of the kernel.
Also note that when you set anything in init.d or at boot to make changes to the kernel settings (ie. voltage, clock speed, or governor) you will have to open System Tuner and kill "mpdecision" to offline the second core.
Voltages​Thought I would post the current voltages that I'm running on my phone. These may not work for you so don't set them at boot until you're sure your phone is stable.
Code:
192000: 812500
310500: 825000
384000: 825000
432000: 850000
486000: 875000
540000: 875000
594000: 875000
648000: 900000
702000: 900000
756000: 950000
810000: 950000
864000: 975000
918000: 975000
972000: 975000
1026000: 1000000
1080000: 1000000
1134000: 1025000
1188000: 1025000
1242000: 1050000
1296000: 1075000
1350000: 1100000
1404000: 1100000
1458000: 1100000
1512000: 1150000
1566000: 1175000
1620000: 1200000
1674000: 1200000
1728000: 1225000
1782000: 1250000
1836000: 1300000

This is where it's at!

Thank you for 2d and 3d overclock
Sent from my SGH-T989 using xda premium

The beast is here.

Killbynature said:
Thank you for 2d and 3d overclock
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Too bad it's still hardware locked at 60fps though. It does however seem to smooth out the UI.

You just made my day...Thank you
Sent from my SGH-T989 using XDA App

Wowwwwww yes
sent from my real Gs move in silence like lasagna

Is there a reason this is a separate kernel instead of Jugs 0.4?

Ok im still noob status with kernals. Im on Juggernaut 2.6 now. No mods. May I kindly ask where do I start? I wanna break the ice and try this. Do i just download and flash? Sorry i havent read every kernal thread as i never wanted to dive in yet. But I wanna give this a go. I want 20hrs of batt life too. Lol. Thanks ahead of time for any assistance.
Edit- Got assistance.. Thanks Jangst123
Sent from my SGH-T989 using xda premium

Woot woot!!!
Sent from my HercuBEASTLY Thingy!!!

atrade said:
Is there a reason this is a separate kernel instead of Jugs 0.4?
Click to expand...
Click to collapse
Because it's not my kernel? This is cmenard's baby. He's 1000x better at kernels than I am

Romanbb said:
Because it's not my kernel? This is cmenard's baby. He's 1000x better at kernels than I am
Click to expand...
Click to collapse
Haha okay my bad! The real question will be if it can beat the battery life on yours... It is just incredible jugs + juggernaut rom.

atrade said:
Haha okay my bad! The real question will be if it can beat the battery life on yours... It is just incredible jugs + juggernaut rom.
Click to expand...
Click to collapse
Only one way to find out!

Smooth on lagfree..
Can we only UV via adb? Voltages don't come up in setcpu
Also is bfq or cfq recommended
sent from my real Gs move in silence like lasagna

Romanbb said:
Only one way to find out!
Click to expand...
Click to collapse
That must be why I just booted out of recovery...

Downloading now. This is getting better and better
Sent from my SGH-T989 using XDA App

Ty team kang this thing flies
Sent from my HercuBEASTLY Thingy!!!

is it safe to just slap this kernel on top of Synergy?
or do i have to flash back to Jugger 2.6, before flashing Bullet?

saweet !! DL now

[08DEC14][Kernel] [GT-I9505] AEL Kernel TW v6.5 {FEATURE PACKED} {STWEAKS}

PLEASE NOTE: THIS KERNEL IS ONLY FOR THE INTERNATIONAL VARIANT OF GALAXY S4 (GT-I9505) and ONLY FOR TW ROMS
(Android 4.4.3 Google Edition Release is also available)​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
S4 AEL Kernel FEATURES:
- Merged with BRAND NEW I9505XXUGNG8 Official Samsung Source
(GT-I9505_KK_Opensource_Update9)
- Latest Linux Kernel Base 3.4.105
- Built with latest SaberMod Toolchain v4.10
- Full STweaks Support
- Full Synapse Support
- CPU OC up to 2.1 ghz (4 additional OC steps)
- CPU UC down to 162 mhz (4 additional UC steps)
- CPU Voltage Control
- GPU Voltage Control
- USB Keyboard/Mouse hack
(Turn your phone into a keyboard and/or mouse)!!
- Sweep2Sleep Hack
- ADDITIONAL GOVERNORS:
pegasusq, intelliactive, conservativex, ondemandplus, wheatley,
intellidemand, alucard, darkness, nightmare, abyssplugv2,
lionheart, dancedance, smartmax, asswax, conservative,
bluactive, intellimm, yankactive, bioshock
- ADDITIONAL I/O SCEDULERS:
simple (sio), zen, vr, fifo, fiops
- Added Intellithermal driver
- Enabled auto-hotplug
- Faux Sound Control
- LED Brightness and Fading Control
- Added KGSL: Add a simple GPU governor for Adreno xxx GPU series
- Vibration Intensity Control from CM
- Gamma (color) Control [CM]
- SlimBus OC
- Dynamic Fsync
- Async Fsync
- Added Frandom
- Enabled the following TCP Congestion Controls:
(cubic, westwood, bic, htcp, hybla, vegas, hstcp)
- Fast Charge
- Fixed Charging with Power Off for Old Bootloader
- Permissive with init.d support
Click to expand...
Click to collapse
DOWNLOAD LINKS:
ECHOE DEVELOPMENT/DOWNLOAD CENTER
CREDITS and THANKS:
1. Firstly to all these INCREDIBLE (REAL) DEVELOPERS that I have been studying their code relentessly:
@ktoonsez
@faux123
@wanam
@Fenny
@alucard
(I trully hope i have not forgotten anyone!!!!)
Click to expand...
Click to collapse
HELPFUL MATERIALS/ GUIDES FOR NEWBIES IN KERNEL
DEVELOPMENT as well as for USERS WHO WANT TO LEARN MORE
A. Various Guides for Building Kernels from Source
. http://omegadroid.co/tag/step-by-step-guide-to-compile-kernel-for-note-3/
. http://forum.xda-developers.com/showthread.php?t=1966751&nocache=1
. http://xda-university.com/as-a-developer/getting-started-building-a-kernel-from-source
. http://xda-university.com/as-a-developer/adding-features-to-your-kernel
Click to expand...
Click to collapse
B. Explanations about the different governors and I/O Schedulers
http://forum.xda-developers.com/showthread.php?t=1950084
http://androidforums.com/xperia-mini-all-things-root/513426-android-cpu-governors-explained.html
Click to expand...
Click to collapse
TW SOURCES
GE SOURCES​
XDA:DevDB Information
AEL Kernel, Kernel for the Samsung Galaxy S 4
Contributors
friedrich420, friedrich420
Source Code: https://github.com/friedrich420/S4-AEL-Kernel
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 6.5
Stable Release Date: 2014-12-08
Created 2014-04-09
Last Updated 2015-05-04

Reserved #1

Last one

Congratulation for your first release in world of kernels. All the best

YOU are IT! NO WORDS TO DESCRIBE YOU!!! WELL DONE! !! tearing up. .. what a girl...
Sent from my GT-I9505 using Tapatalk

störte said:
Congratulation for your first release in world of kernels. All the best
Click to expand...
Click to collapse
My good friend!!! YOu are one of the very few who know exactly how we began
THANK YOU FOR EVERYTHING!!!! :good:
daxgirl said:
YOU are IT! NO WORDS TO DESCRIBE YOU!!! WELL DONE! !! tearing up. .. what a girl...
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
Ohhhhhhhh
THANKS FOR PUSHING ME MY INCREDIBLE (STILL CANT BELIEVE I FOUND YOU!!!) DIRTY FLASHER

Yeahhhhhh!!!! You rock!!!
Inviato dal mio GT-I9505 utilizzando Tapatalk

And now the thread is up. Noice! :laugh: I tell you guys, this kernel rocks like it's rom! :good: Best of luck to this! :laugh:

Congratulation and thanks for your support to android community I downloaded just now, and now flash it

bluflight said:
Congratulation and thanks for your support to android community I downloaded just now, and now flash it
Click to expand...
Click to collapse
Thank you!!
I cant wait for your feedback my man
Sent from my SM-N9005 using XDA Premium 4 mobile app

GREAT, congratulations to your decision to release it. I'm running this Kernel for about 24 hours now.
No issues so far and the Phone is smooth as a cat. :good::highfive::good:

Just flashed the kernel! Great job Friedrich!

Congratulations sir ! So glad to be witness to the birth and growth of AEL ? ! The children (like Echoe rom and AEL kernel) grow so fast ?
Sent from an Echoenian

in One word Wow, I should not leave for an holiday to start with,
Not only releasing 2 V's within 24 hours but on top of that a terrific kernel to go with that!!!
Glad that you overcome your fears and that you have such a great team behind you that will continue to push you to make sure that you achieve what you like to do best!!!!
great job

Acer4605 said:
in One word Wow, I should not leave for an holiday to start with,
Not only releasing 2 V's within 24 hours but on top of that a terrific kernel to go with that!!!
Glad that you overcome your fears and that you have such a great team behind you that will continue to push you to make sure that you achieve what you like to do best!!!!
great job
Click to expand...
Click to collapse
The POET has spoken!!!
Sent from my GT-I9505 using Tapatalk

:good::good:
Keep at it Fried! We need more devs like you!

Congrats on the kernel, I was just shy of 2 and a half days on a single charge and that is with a galaxy gear tethered to it!
By far and away the best kernel for battery!
:good::good::good::good::good::good::good::good::good::good::good::good:

friedrich420 said:
My good friend!!! YOu are one of the very few who know exactly how we began
THANK YOU FOR EVERYTHING!!!! :good:
Click to expand...
Click to collapse
You are most welcome. Even i am playing as well with AOSP Rom . I always have my eyes on you
And if you need help you know where to find me

ael kernel setting
Sorry for the maybe noob question, but I can't find how change the advanced setting. I tried evriting, look everyware, used different apps, flash ael again, without succes... what I do wrong? All the time only this setting possible:

Congrats dude,
Welcome to world of kernels...
tapatalked by an Echoenian on old b/l without knox

[KERNEL] eLite Kernel [GPE 5.1] [Sense 5.0.2] [Lollipop]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome to Elite Lollipop Kernel, a custom kernel for the Verizon HTC One, built for Android 5.0.2 - Lollipop and GPE 5.1. This version is for Lollipop Sense and GPE.
Additional Features are as follows:
- CPU OC and UC 162-2106
- ROW, SIO, FIOPS io schedulers
- Smartmax, Optimax, and Ragingmolasses Governors
- Max Screen Off CPU Frequency
- Advanced TCP Congestion controls
- Fast Charge
- GPU OC/UC with steps of 128, 200, 320, 400, 450, and 487
- Simple GPU governor
- Faux Sound Control
- User Space Voltage control
- Screen Wake options: Sweep2Wake, DoubleTap2Wake, Logo2wake, pocket detection, and Logo2Menu
- Thermal control by crpalmer
- Neon drivers
- Linaro 4.9.4 - cortex a15 toolchain
- 02 Optimazations
- LZ4 Compression
Downloads
Elite L GPE 5.1 - untested but should work on Sense just fine
Stock Clocks: eLite_kernel-09_20_2015_stkclock
OC/UC: eLite_kernel-09_20_2015
Elite L Sense 5.0.2
Stock Clocks: eLite_kernel-03_11_2015-stockclk-NEW
OC/UC: eLite_kernel-03_11_2015-NEW
Source
XDA:DevDB Information
Elite Kernel, Kernel for the Verizon HTC One
Contributors
brymaster5000
Source Code: https://github.com/brymaster5000/m7-501/tree/eLite
Kernel Special Features: CPU & GPU OC/UC, wake gestures, thermal, voltage control
Version Information
Status: Stable
Created 2015-03-06
Last Updated 2015-09-21

Reserved

Thanks as always for the work and help Bry

thanks a lot bry !
will flash this tonight and report after playing with it for sometime

Nice! Works perfectly. Just what I was wanting to make my phone perfect.

Thanks guys. I cleaned this version up compared to the 443 version. I wanted a fresh start on this while maintaining the necessary goodies but not going overboard. Most of the additions to this version are under the hood.

Tried it and had problems.
1st boot up stuck at the HTC screen, I had to restart it, then it booted.
BT connected but had no voice, nor audio.
That's as far as I got before restoring.
It did work I just don't have the Free time at this moment to fiddle with the BT.

I have a concern y are u including gov like optimax in ur kernel when our board doesn't support thread migration?

which app would be best to control this kernel ?
i need to change wake gestures and disable logo2menu
thanks.

aaki_rocker said:
which app would be best to control this kernel ?
i need to change wake gestures and disable logo2menu
thanks.
Click to expand...
Click to collapse
trickster

aaki_rocker said:
which app would be best to control this kernel ?
i need to change wake gestures and disable logo2menu
thanks.
Click to expand...
Click to collapse
Or you could change the init.d file and reboot.
peteangi said:
trickster
Click to expand...
Click to collapse

i must admit its a pretty neat kernel.
phone doesn't heat up much.
the charging time is definitely lower than other kernels I've used so far.
can't comment on battery life now. will use it for a couple of days more and report later.
thank you for your awesome contribution to the m7 community bry.

the battery readings are unstable. 56% since the morning.
i have been playing parking simulator games, using whatsapp, hike and still the battery % wont change. rebooted the phone and the battery was like 47%. rebooted again and it went back to 55%.

Not sure if that's the kernel. I would imagine that the battery drivers would be in the ROM no?

aaki_rocker said:
the battery readings are unstable. 56% since the morning.
i have been playing parking simulator games, using whatsapp, hike and still the battery % wont change. rebooted the phone and the battery was like 47%. rebooted again and it went back to 55%.
Click to expand...
Click to collapse
It probably has to do with a battery mod. As there are a few to choose from in nusense, something might not have flashed correctly. I had similar issues on bonestock when I tried flashing my ecliptic battery mod. Because he had a mod in there too show better history stats, the battery mod would hang in percentages....so just my experience and it is probably something similar.

brymaster5000 said:
It probably has to do with a battery mod. As there are a few to choose from in nusense, something might not have flashed correctly. I had similar issues on bonestock when I tried flashing my ecliptic battery mod. Because he had a mod in there too show better history stats, the battery mod would hang in percentages....so just my experience and it is probably something similar.
Click to expand...
Click to collapse
I don't think that is the case since the same thing would be happening with the default kernel.

Been running g the stock clock for days now, before release even and my battery hasn't done that.

disconnecktie said:
I don't think that is the case since the same thing would be happening with the default kernel.
Click to expand...
Click to collapse
I was attributing it to having an abundant amount of options, he may have had a bad install. That is all.

brymaster5000 said:
I was attributing it to having an abundant amount of options, he may have had a bad install. That is all.
Click to expand...
Click to collapse
yep could be !
i just clean flashed the rom though !
just to test the kernel.

eriknors said:
I have a concern y are u including gov like optimax in ur kernel when our board doesn't support thread migration?
Click to expand...
Click to collapse
The snapdragon s4 processor has IMT - interlaced multi thread architecture.

[KERNEL][MM] BlueMoon r1.0 [25/10]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
BlueMoon Kernel​"... And the moon started to shine in blue again..."​
About:
So, i was inactive in Optimus G forums for quite a long time, since i broke my glass on that phone and changed to Nexus 5. But when i found out that our E975 got Marshmallow port, i had to return here. So, i charged this phone and make it even more sweet with latest Android. The problem was, that this phone doesn't have any Marshmallow custom kernels. I used to be a kernel dev in this forum, but i moved on, and i kinda know how failed up my previous projects on this phone were. But now i have a lots of knowledge i didn't have before. So i made another BlueMoon for this device, and i am sharing it now.
Features:
Linux Kernel Version 3.4.0
Based on kernel 3.4.0
CPU Overclock
Added overclock to 1,7 GHz
Frequency range: 94, 189, 243, 384, 486, 594, 702, 810, 918, 1026, 1134, 1242, 1350, 1458, 1512, 1620, 1728 MHz
MSM Limiter
Added ability to set governor and min/max frequency for each CPU core specifically
Added option to set max frequency in suspend state and manage some other parameters of that state
Power-efficient Workqueues
Added option to unbound scheduled work to save load on sibling CPU cores amd queuing work on CPU0, for a cost of slight performance decrease
CPU Governors
ondemand
performance
powersave
userspace
interactive
conservative
smartassV2
ondemandplus
intelliactive
yankdemand
optimax
pegasusq
HYPER
alucard
darkness
nightmare
smartmax
intelliminmax
abyssplug
abyssplug2
CPU Voltage Control
Added ability to change CPU voltage for each frequency specifically
CPU Hotplug Drivers
IntelliPlug
Mako Hotplug
MPDecision Hotplug
Alucard Hotplug
Zen Decision
AutoSMP
GPU Overclock
Overclocked GPU to 450 MHz
Frequency range: 27, 128, 200, 320, 450 MHz
GPU Governors
simple
ondemand
Gamma Control
Added option to control Gamma screen presets
FauxSound
I think we all know this one, the best sound manager in kernel
USB Fast Charge
Disables MTP while connected to PC, so we can charge phone faster
BLX
Added BatteryLifeExtender, to keep phone's battery health
I/O Schedulers
bfq
noop
deadline
row
cfq
fiops
sio
sioplus
zen
fifo
tripndroid
And even more stuff, a lot more, check my GitHub history
How to install:
Just flash on Marshmallow ROM in TWRP recovery. If you came to this point of installing Marshmallow, i suppose you know how to flash the kernel.
Credits:
I was thinking, and there is too many people to thank. A lot of people motivated me and helped me. The first one was @dadi11 who taught me basics of Android development, so i would like to specially thank him. And to guys who made a kernel this work is based on. And i would like to thank everyone in my commit history, because without those guys, there would be no this kernel today.
Download:
HERE
XDA:DevDB Information
BlueMoon, Kernel for the LG Optimus G
Contributors
Matthew_333
Source Code: https://github.com/Matthew-333/BlueMoon-GEEHRC
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: r1.0
Stable Release Date: 2015-10-25
Created 2015-10-25
Last Updated 2015-10-25

Thank u so. Im on android 4.4 now but i will try it on someday android 6.0 is almost stable.

Damn.
No geehrc lollipop to test out?

Excessive consumption battery....Very slow

Let it run through a few battery cycle before commenting on battery life

Dear @Mathew_333 please implement the otg hack. like lollipop bluemoon.
It worked great on lollipop.
& If you were in dormitory with no pc you could find out how useful it can be!

The kernel is working very well, the battery consumption is very good too.
The only "problem" encountered it is that even using Kernel Auditor App, the maximum frequencies do not save, they continue reaching 1728mhz even after i set in 1512mhz.
Until now is the only observation I can do, great job!
(Sorry for the bad inglesh).
Sent from my Optimus G using XDA Free mobile app

btotta said:
The only "problem" encountered it is that even using Kernel Auditor App, the maximum frequencies do not save, they continue reaching 1728mhz even after i set in 1512mhz.
Click to expand...
Click to collapse
I have the same problem.

M.M.K said:
Dear @Mathew_333 please implement the otg hack. like lollipop bluemoon.
It worked great on lollipop.
& If you were in dormitory with no pc you could find out how useful it can be!
Click to expand...
Click to collapse
Well, i guess i can tell you - i know how useful it is, i am in dormitary with no pc, i just have vecation this week The problem is that i moved to Nexus 5 and there this support is already implemented without any kernel hacks.. I have really a lot of work and i have to oupdate this BlueMoon and the one for Nexus 5, i can promise you update, as soon as i will be able to - And i understand you how you feel without pc haha

@btotta @st4ik The thing with frequency will be fixed in r1.1, stock frequency will be set to 1,5GHz too, so overclock will be optional

Matthew_333 said:
Well, i guess i can tell you - i know how useful it is, i am in dormitary with no pc, i just have vecation this week The problem is that i moved to Nexus 5 and there this support is already implemented without any kernel hacks.. I have really a lot of work and i have to oupdate this BlueMoon and the one for Nexus 5, i can promise you update, as soon as i will be able to - And i understand you how you feel without pc haha
Click to expand...
Click to collapse
thanks for understanding ^_^ implement it only if you have the time...
Matthew_333 said:
@btotta @st4ik The thing with frequency will be fixed in r1.1, stock frequency will be set to 1,5GHz too, so overclock will be optional
Click to expand...
Click to collapse
In the beginning of the time of my phone, when it wasn't rooted, I was really interested in overclocking!
But now I'm mostly interested in thermal! there's a huge problem of battery & overheating bro!
Just suggesting! but maybe you can make the kernel more classic with 1.5 ghz max.
Later make marshmallow radioactive with 1.9 ghz overclock for bitting the competitors
Thank you for your time build whenever you had the time. patiently & perfectly

@Matthew_333 What have you done what have you got the kernel won't compile!? Not compiled not linaro, arm eabi...
Here, look at this, maybe that is not so...
https://github.com/nitrogen-devs/BlueMoon-GEEHRC

@Mr.MEX, with my script it should work. Try with bluemoon_defconfig, maybe your gee_defcondig has some compactibility issues with my changes to kernel source.. And which Linaro you use? 4.9.4? It works for me..

Matthew_333 said:
@Mr.MEX, with my script it should work. Try with bluemoon_defconfig, maybe your gee_defcondig has some compactibility issues with my changes to kernel source.. And which Linaro you use? 4.9.4? It works for me..
Click to expand...
Click to collapse
https://github.com/Matthew-333/BlueMoon-GEEHRC/tree/master/arch/arm/configs - 404

@Mr.MEX what the hell? I didn't though my source is broken, anyway, i am working on rebased kernel now, so, r2.x. And as we talked about updating to latest linux version, i found where trouble is.. We could upgrade without any bigger issues, but the problem is that commit "M for Mako" edited file "fs/dcache.c" in some vfs lines, and lglock, and i tryed all combinations but i get build errors. Do you have any idea how we could be able to fix this?

Matthew_333 said:
@Mr.MEX what the hell? I didn't though my source is broken, anyway, i am working on rebased kernel now, so, r2.x. And as we talked about updating to latest linux version, i found where trouble is.. We could upgrade without any bigger issues, but the problem is that commit "M for Mako" edited file "fs/dcache.c" in some vfs lines, and lglock, and i tryed all combinations but i get build errors. Do you have any idea how we could be able to fix this?
Click to expand...
Click to collapse
@Matthew_333 Revert all to hell, commits to lollipop... added Abhinav to run M on our device. To patch the kernel to 3.4.110 and then to do everything to M.
Option so-so or am I crazy?
And please tell me which commit last r1.0? So I can compile a kernel fine...
P.S. There are hangouts?

@Mr.MEX add me on hangouts, [email protected] we will talk there tomorrow. Your advice seems quite good tbh, i wikk try this thing with reverting to lollippp tomorrow in afternoon

no more releases?

dt2w ??

**NOTORIOUS-Kernel** || TW || AQE5 || G95X F/FD || {8-6-17} || V1.0 || 4.4.70

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Short-Story of NOTORIOUS-Kernel: TBH, I'm a user just like you, i know what i need in a Custom-Kernel, and i want to keep the success running, (which I've accomplished from V1 based on my experience with my S7E and based on users opinion on Telegram-Group) in every upcoming-NOTORIOUS-Kernel-Project.
​STABLE | FAST | SOLID-BATTERY-LIFE |​
Kernel Features :
Linaro 6.3 toolchain
Spectrum Support with 4 Profiles
SafetyNet: GREEN
add init.d script support
F2FS SUPPORT
enabled hidden tcp-algorithm
Disabled some of the debugging ------ (reduce kernel size)
----------------------------------------------------------------------------------------------------------------------------
Reduced RQ Lock-Contention for upto 0.7% increase in Performance.
Optimized Integer SQRT. for upto 3x faster operation.
Optimized Console FrameBuffer for upto 70% increase in Performance.
----------------------------------------------------------------------------------------------------------------------------
ZEN: Updated to 4.10
BFQ Updated to BFQ-v8r10
deadline: optimize for non-rotational
Added Zen, Row, Fiops, Fifo, Sio, SioPlus, VR, TripNDroid,
----------------------------------------------------------------------------------------------------------------------------
async i/o latency to a ssd (34% gain)
block: Disable add_random
Support for CRC-Toggle (Enabled by Default in Misc. TAB)- Disable "CRC-Check" for an improvement upto 30% faster I/O
add/enable Support for FRandom RNG Driver (upto 50x faster than the default one).
----------------------------------------------------------------------------------------------------------------------------
TCP: Tweak Speed
Less "Boot Time"
----------------------------------------------------------------------------------------------------------------------------
kernel: Reduce time to sleep
Disable logcat/android logging. - Improves the performance and the battery life.
wake-lock fixes
Sensors wakelock control
Reduce Wlan_rx & Wlan_ctrl wakelocks
----------------------------------------------------------------------------------------------------------------------------​TELEGRAM GROUP:
You can join us by using the following link: https://t.me/notoriouskernel8895
Don't forget to show some support by clicking the thanks button :good: , if you like my work
----------------------------------------------------------------------------------------------------------------------------​DOWNLOAD LINKS [UPDATED] :
NOTORIOUS-Kernel V1.0
ABOUT SPECTRUM MORE INFO ABOUT SPECTRUM
Changelog CHECK LATEST CHANGELOG IN HERE
DOWNLOAD MTweaks App MTweaks APP
----------------------------------------------------------------------------------------------------------------------------​
CREDITS:
Thanks to Thanks to @Nameless and @senzatiOn- for the banner/logo
HUGE THANKS TO @Alcolawl for Tweaking Interactive Governor.
@Tkkg1994
@lyapota
@jesec
@morogoku
@frap129
@osm0sis (AIK)
& finally Samsung For Sources
XDA:DevDB Information
NOTORIOUS-Kernel-8895, Kernel for the Samsung Galaxy S8+
Contributors
farovitus
Source Code: [url]https://github.com/farovitus/NOTORIOUS-8895[/URL]
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2017-06-07
Created 2017-06-07
Last Updated 2017-06-07

Sounds great! I can't download it yet though, getting a DNS error.

Highspeed123 said:
Sounds great! I can't download it yet though, getting a DNS error.
Click to expand...
Click to collapse
same to me :/ but great work

@farovitus
Welcome and thank you!

Finally thread is re-opened :laugh:

good job mate!

farovitus said:
Finally thread is re-opened :laugh:
Click to expand...
Click to collapse
The link is still not working for me...

running for a few hours, stable, fast and cool so far. will test a full cycle tomorrow. running on Batstock v1.1 on s8+.
Any plans for any over and underclocking of cores?
Keep it up

Moe5508 said:
The link is still not working for me...
Click to expand...
Click to collapse
Thank you for telling me check now

AlexMullerSA said:
running for a few hours, stable, fast and cool so far. will test a full cycle tomorrow. running on Batstock v1.1 on s8+.
Any plans for any over and underclocking of cores?
Keep it up
Click to expand...
Click to collapse
I already underclocked big cluster, work is still not done on this kernel, will get better and better by time.

very good Performance for s8+ SM-G955FD

Hello someone tried en room CAROTIX

any luck to make secure folder work?

Got quite a lot of battery drain since last night. I'm also getting 9hours proximity sensor usage over 11hours on with wifi always active.

kavianr said:
any luck to make secure folder work?
Click to expand...
Click to collapse
Never with knox trip

AlexMullerSA said:
Got quite a lot of battery drain since last night. I'm also getting 9hours proximity sensor usage over 11hours on with wifi always active.
Click to expand...
Click to collapse
What?

im getting bt stop working ?`and some reboots

I don't know what you guys are doing, but I have used this kernel with 3 different roms so far with no issues at all. They must be user errors rather than the kernel at fault. Check what you have installed and what tweaks you're making.

Guys join NOTORIOUS-KERNEL-8895 at the following link as i am going to ask the mods to close this thread. (NO NEED FOR A DUPLICATED THREAD)
https://forum.xda-developers.com/ga...torious-kernel-tw-aqe5-g95x-f-fd-7-6-t3618234

farovitus said:
Guys join NOTORIOUS-KERNEL-8895 at the following link as i am going to ask the mods to close this thread. (NO NEED FOR A DUPLICATED THREAD)
https://forum.xda-developers.com/ga...torious-kernel-tw-aqe5-g95x-f-fd-7-6-t3618234
Click to expand...
Click to collapse
Please follow this ^^^ thread for more updates.
Thread closed.
Razvan
Forum Moderator