Develop Bugs

[Q] connection issues

i have a htc touch pro 2 and before i could connect it to computer. now when i try to it tells me instantly that the device cannot be recognized by microsoft on my cpu. i have a toshiba satellite l555 running windows 7. also while i try chrging it it takes forever and if the phone is on it says that my computer doesnt supply enough power to charge it. also says the same thing when its connected to my xbox 360. i just would appreciate any help.

noob91 said:
i have a htc touch pro 2 and before i could connect it to computer. now when i try to it tells me instantly that the device cannot be recognized by microsoft on my cpu. i have a toshiba satellite l555 running windows 7. also while i try chrging it it takes forever and if the phone is on it says that my computer doesnt supply enough power to charge it. also says the same thing when its connected to my xbox 360. i just would appreciate any help.
Click to expand...
Click to collapse
Have you tried a different cable? Sounds like you've tried a different port, considering you plugged it into your 360...
Your USB port might be dying/dead....

I have not tried a different cable yet. I was thinking about gettin one from amazon to try. I hope it's just the cable.

noob91 said:
I have not tried a different cable yet. I was thinking about gettin one from amazon to try. I hope it's just the cable.
Click to expand...
Click to collapse
If you have a PS3, some cameras, etc use the exact same plug. Anything mini-USB - even tho it doesn't look like it matches up, it'll work.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I know, doesn't look like the plug will fit - it will!!

Mine don't look like that. It looks like this.

noob91 said:
Mine don't look like that. It looks like this.
Click to expand...
Click to collapse
Yes, I know. I was trying to coax you into using other cables that are around your house that have this similar plug. The 'default' HTC cable looks like the one you posted, but I wanted you to be aware that other cables will work just fine - like the miniUSB standard cable I posted above!!

Oh ok. Well I guess I could try a few. See what happens.

I have the same problem with my TP2.
Tried different cables, different computers, but problem is still there.
I can't connect TP2 with computer, can't sync with Outlook, at least I can flash ROM from mSD card
Any ideas, solutions, maybe there's some fix for this issue?!

MarkoFaca said:
I have the same problem with my TP2.
Tried different cables, different computers, but problem is still there.
I can't connect TP2 with computer, can't sync with Outlook, at least I can flash ROM from mSD card
Any ideas, solutions, maybe there's some fix for this issue?!
Click to expand...
Click to collapse
Has it ever worked? Perhaps it's a hardware issue with the plug. I assume it charges OK?

^ Yes, it worked well in the past. Charging is OK, wiht AC adapter and with USB cable connected to computer. Only ActiveSync doesn't work.

noob91 said:
i have a htc touch pro 2 and before i could connect it to computer. now when i try to it tells me instantly that the device cannot be recognized by microsoft on my cpu. i have a toshiba satellite l555 running windows 7. also while i try chrging it it takes forever and if the phone is on it says that my computer doesnt supply enough power to charge it. also says the same thing when its connected to my xbox 360. i just would appreciate any help.
Click to expand...
Click to collapse
MarkoFaca said:
I have the same problem with my TP2.
Tried different cables, different computers, but problem is still there.
I can't connect TP2 with computer, can't sync with Outlook, at least I can flash ROM from mSD card
Any ideas, solutions, maybe there's some fix for this issue?!
Click to expand...
Click to collapse
Have you guys tried Deleting any/all Partnerships and then uninstalling and reinstalling Windows Mobile Device Center on your PC and then trying again?

Yes
I even reinstaled the system, Win7, WinXP, changed cables, changed computers, even changed ROMs (Energy, Jackos...), still nothing
Weird thing is that charging works just fine, but sync don't...?

I suspect you have a hardware problem with the port on your device. Maybe use a magnifying glass and look at the brass pins inside the port and see if you see any bent or missing pins. You could have two pins touching that could be shorting. Maybe the only solution is repair/replacement.

mr.horndoctor said:
I suspect you have a hardware problem with the port on your device. Maybe use a magnifying glass and look at the brass pins inside the port and see if you see any bent or missing pins. You could have two pins touching that could be shorting. Maybe the only solution is repair/replacement.
Click to expand...
Click to collapse
I'd say that is your best bet. It's entirely possible that the pins for charging (only 2) are fine, while the remainder (I think there's a total of 11?) or a portion of the remainder of the pins are messed up...
Good luck!

arrrghhh said:
I'd say that is your best bet. It's entirely possible that the pins for charging (only 2) are fine, while the remainder (I think there's a total of 11?) or a portion of the remainder of the pins are messed up...
Click to expand...
Click to collapse
I tried with MG, but everything seems to be OK, all pins are there
Oh well, at least it's not the other way around - I can sync but I can't charge

MarkoFaca said:
I tried with MG, but everything seems to be OK, all pins are there
Oh well, at least it's not the other way around - I can sync but I can't charge
Click to expand...
Click to collapse
Try to turn the high speed network thingy off, in your USB connection on your phone. I forgot what it is exactly called but something of that sort.

ccengineer said:
Try to turn the high speed network thingy off, in your USB connection on your phone. I forgot what it is exactly called but something of that sort.
Click to expand...
Click to collapse
Oh, good thinking!
Yeah, try going into Settings and uncheck the box that says Enable Faster Connections. It's in Activesync or USB to PC settings.

Sorry, guys, but I tried that first: Start > Settings > Connections > USB to PC, uncheked the box "Enable faster data syncronization", still nothing

MarkoFaca said:
Sorry, guys, but I tried that first: Start > Settings > Connections > USB to PC, uncheked the box "Enable faster data syncronization", still nothing
Click to expand...
Click to collapse
When you connect your phone to the computer, does it even recognize it, I mean does your computer detect that something got connected to the usb? Were you always plugging it in to the same USB port on your computer?

I HAD the same problem-charging was ok, but no sync. Well...
First of all, check your cables (my TP2 won't work with cables from my old TYTN II). Use cables for particular model, those contacts can be tricky. Now, in your phone's USB to PC settings uncheck "enable faster data sync". It worked for me. Now phone syncs, no problem. When pc starts recognizing your new device, phone will use 3g connection to download some 11MB of drivers, so you must have some credits in order to connect to 3g. Now it works like a charm, no problems whatsoever...
If your PC recognizes the device, but doesn't sync, try this: when connected go to your PHONE's active sync and sync it from there. Worked with me once I had that "issue"...

usb mass storage? how?

well, this is rather embarrassing, I can't seem to find a way to use the phone as mass storage like I did with T989.
I just got it today brand new, already rooted via odin > cwm method.
When I plug in usb cord, I can only access it via MTP but it won't let me transfer large 700mb file.

Enter Settings and tap "Storage". There you should have a menu icon (the vertical triple blocks - on my tablet it's in the top/right - YMMV) which gives you a option called "USB computer connection". Tap it, change from "Media Device (MTP)" to "Mass Storage".

B.Jay said:
Enter Settings and tap "Storage". There you should have a menu icon (the vertical triple blocks - on my tablet it's in the top/right - YMMV) which gives you a option called "USB computer connection". Tap it, change from "Media Device (MTP)" to "Mass Storage".
Click to expand...
Click to collapse
Nope, I dont see any settings under settings-> storage
I get options when I hook up my phone to the pc..but it only has MTP and Camera...no mass storage
Sent from my SGH-T889 using xda app-developers app

lalab0y said:
I get options when I hook up my phone to the pc..but it only has MTP and Camera...no mass storage
Click to expand...
Click to collapse
In this case your SGN2 doesn't seem to support Mass Storage mode. It's there on my SGT10.1 running CM10.

For anyone with a similar problem, the white USB cable that comes with this phone (in some systems like mine) doesn't send data to computers - it only supplies power.
Many people have reported this and I just confirmed it on my system. I connected my NOte 2 to my system with 5 other usb cords and my system found the device. Every time I connected it with the Samsung white usb cable, the computer doesn't see the Note 2.
Either Samsung did something with this usb cable or they really are sending a lot of defective usb cables out.

Dawgneck said:
For anyone with a similar problem, the white USB cable that comes with this phone (in some systems like mine) doesn't send data to computers - it only supplies power.
Many people have reported this and I just confirmed it on my system. I connected my NOte 2 to my system with 5 other usb cords and my system found the device. Every time I connected it with the Samsung white usb cable, the computer doesn't see the Note 2.
Either Samsung did something with this usb cable or they really are sending a lot of defective usb cables out.
Click to expand...
Click to collapse
Thats not true i always use the white usb on my computer..... Its just hit or miss sometimes

I'm not able to mount it as a mass storage device either, my only options are "Media Device" or "Camera", neither of which show up as an actual drive on my windows machine. and i'm not using the white usb cord that came with it, i'm using my own cord that i've used for years, and with many other devices.

Dawgneck said:
For anyone with a similar problem, the white USB cable that comes with this phone (in some systems like mine) doesn't send data to computers - it only supplies power.
Many people have reported this and I just confirmed it on my system. I connected my NOte 2 to my system with 5 other usb cords and my system found the device. Every time I connected it with the Samsung white usb cable, the computer doesn't see the Note 2.
Either Samsung did something with this usb cable or they really are sending a lot of defective usb cables out.
Click to expand...
Click to collapse
What? No. This is not true ^^^^
Sent from my SGH-T889 using Tapatalk 2

Coming to think about it (totally forgot about it)...
Maybe give Easy UMS a try. I use it on my SGS3 for USB Mass-Storage Mode, and according to the thread it also seems to work on the Note 2.
Though, keep in mind:
This app will make the external (not the internal!) microSD card of your Samsung Galaxy S3 (International, US versions, International LTE) available as USB mass storage device.

Easy UMS WORKS!
B.Jay said:
Maybe give Easy UMS a try. I use it on my SGS3 for USB Mass-Storage Mode, and according to the thread it also seems to work on the Note 2.
Click to expand...
Click to collapse
I'm running Jedi-X V1 (wanted MultiView real bad, which works sweetly) on my T-Mobile GNote2 and Easy UMS worked GREAT.
It's usage is not extremely intuitive: Click the UMS button to make it run in mass storage mode, attach to computer, do your file transfer thing, SAFELY EJECT when done, wait a few seconds, then click "Mount SD" to get the card back for your android to use.
After using the phone I went to re-connect it to the computer, and found that a couple of apps were using the SD card, so I long-pressed home, clicked Task Manager (the pie graph at the bottom) and used the Clear Memory function to kill innactive apps, freeing the card up to be unmounted and UMSed,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note: YOU MUST BE ROOTED FOR THIS APP TO WORK. And it only shares the external SD card.

RavPower WD01 WIFI Hub With Wireless Bridge Mode

I ordered the RavPower WD01 battery-powered wireless hub with wireless bridge mode when it went on sale for 50% off on Amazon (it's still on sale and here's the link, if you're interested - http://www.amazon.com/RAVPower%C2%AE-RP-WD01-Wireless-WiFi-Disk-Li-Polymer/dp/B00AQUMZRA/ref=sr_1_1?ie=UTF8&qid=1362256659&sr=8-1&keywords=ravpower+wd01 ). I wanted the ability to use portable media that I already have with my note and had been contemplating purchasing this unit due to the awkward placement of the proprietary power port that you need to plug OTG cables into. The Ravpower hub solves this issue since it's wireless.
The vendor processed and shipped my order promptly; unfortunately, a snow storm in the Midwestern US delayed the shipping company by several days. I've now had the unit for several days and can only say one word, WOW. This device exceeds my expectations. It's well worth the investment and can be used not only with Android and IOS devices, but with PCs as well.
The WD01 Is a compact device that's slightly smaller than a deck of cards. It's shipped well-protected in a sturdy box with foam enclosures that surround and it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
In addition to the WD01, the box contains a USB charging cable to charge the internal 3000 MAH battery and brief instructions. The battery on my unit was partially charged when I received it so I was able to set it up immediately. The WD01 has a slot for an SD card and a full-sizes USB port that can support flash drives and external hard drives (up to 2T).
The photo I've linked shows a flash drive and an SD card installed, but I have plugged my 2T hard drive and some smaller capacity hard drives into the unit and it could read all of them.
There is a free app that you can download and intall to setup the WD01, but as other reviewers have noted, you don't need it. What you need to do once you power on the device is wait for the WDO1's internal router to complete its power up, which can take a minute or so. Once the blue WIFI indicator light for the router stops blinking go to your note's WIFI settings and you should see a new network beginning with WIFI, click on connect. When prompted for a password, input the default, which is: 11111111. (That's eight 1s.) You can now use your Internet browser to set up your WD01 and I would recommend this method since you can configure more of the features than you can with the app. I also recommend using Dolphin HD or Firefox over the stock browser. Once your note has connected to the WD01 pull up your browser and input the default iP address of the WD01, which is 10.10.10.54 . You'll see the main login page.
The user name, which cannot be changed, is admin. The defaut password empty so just hit enter. This will launch a wizard that will take you through all the settings and allow you to set your own passwords for the device as well as change the default IP address for browser access to settings. You also set up the WD01's wireless bridge mode through the wizard. This feature will allow the WD01 to connect to your router so you can access the Internet via your router while connected to it. A word of warning, however, your mileage may vary with this feature depending on you router. Some routers now support WDS with strong WPA2 encryption, many don't. My router doesn't support WDS so I tested briefly putting my router into bridge repeater mode, but I also had to reduce my encryption down to WEP (with attendant speed reductions). It worked, but I quickly reverted my router back to its previous settings with WPA2 encryption. The wireless bridge feature isn't critical to me. However, when I next upgrade my router I'll make sure it supports WDS with WPA2 encryption. If you set up the wireless bridge mode, you can also configure dynamic dns on the WD01.
Once the wizard has taken you through all the settings, you'll see the main WD01 browser screen.
This allows easy navigation to make changes again to network settings.
You can even search attached media by name.
If you have a file manager that supports SMB, like ES File Explorer, you can use it to view and open files once connected to the WD01.
All files I tested, including audio books, MP3 and MP4 formats opened quickly and played flawlessly.
If you so desire, you can download the free AIRSTOR app to setup the device, but if you don't like bloatware, I recommend against it. The WD01 runs for about 5 hours on its internal battery. Up to 5 devices can connect to it at a time. The range on mine is about 25 feet before the signal gets too weak. I highly recommend this device. It's well worth the money.

FYI - It is on sale at Newegg.com for $40 from a third party. I think a number of similar units will come on the market shortly. However, I picked up one of these.
PS If you need warranty service, newegg is insisting on having the original box.
http://www.newegg.com/Product/Product.aspx?Item=9SIA1HD0HM8076

For anyone who wants to look at the full user manual, here's a link. http://www.ravpower.com/downloads#RP-WD01 My unit shipped with updated firmare, but this page has a link to the new firmware version. This product readily serves a replacement for OTG cables.

mke1973 said:
For anyone who wants to look at the full user manual, here's a link. http://www.ravpower.com/downloads#RP-WD01 My unit shipped with updated firmare, but this page has a link to the new firmware version. This product readily serves a replacement for OTG cables.
Click to expand...
Click to collapse
Thanks for the link! Waiting for mine.

Anyone found a UK seller for the rav power?
Thanks
Sent from my GT-N7000 using xda app-developers app

kharmafish said:
Anyone found a UK seller for the rav power?
Thanks
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
You if you email the guys at their website, they can arrange shipping to you. I got mine in australia in about 8 working days.
Here is a connectivity review I did :
http://forum.xda-developers.com/showthread.php?p=41751832#post41751832

Miracast not working on Nougat

I have enable Miracast on build.prop, for it to appear on the cast menu, it adds the option, I am able to find my TV, but when I connect to it, I receive a Force Close on the settings app, and the TV appears as black, or an static image of my phone homescreen, opening the settings app again would force close another time.. Is there any workaround for it?

I can confirm this. Miracast is not working on 7.0 (NPD90G).

UP

Really?

Thanks for the heads up. I had to root my 5X just to enable it (to change build.prop). And haven't allowed any updates since. I'd love to try Nougat, but not if it just cripples things I use.
I also had to root to enable apps to be able to access USB flash drives. Anyone know if Google resolved this in Nougat?

erik777 said:
Thanks for the heads up. I had to root my 5X just to enable it (to change build.prop). And haven't allowed any updates since. I'd love to try Nougat, but not if it just cripples things I use.
I also had to root to enable apps to be able to access USB flash drives. Anyone know if Google resolved this in Nougat?
Click to expand...
Click to collapse
My EStrong File Explorer can access a USB flash drive (thumb type) without root on N. I haven't tried any other apps, though. However, otg, for that app, has always been available so that may not help with your issue.
Sent from my Nexus 9 using Tapatalk

confirm
I have Nougat installed and I try to connect to my microsoft wireless display adapter v2. I find it in the cast menu, but if I hit connect, the display adapter says connecting on the TV, but it is never successful.
Though I have to mention, that my adapter is pretty new and I never tried with Android 6, maybe it didn't work there either.
Greetings,
liebero
P.S: Did anyone successfully connect the microsoft wireless display adapter v2 with Android 6? Then I try switching back.

I'm on Android 7.0 NBD90W and the persist.debug.wfd.enable=1 fix doesn't work anymore. I've tried it on 2 LG smart TVs already.

I can confirm that Miracast to Microsoft display adaptor works on marshmallow. I have upgraded to nougat and it didn't work so I downgraded to marshmallow and plan to stay on marshmallow till I get a new phone. Probably going to go with a windows phone or an unlocked LG/Samsung. Seems Google no longer cares to offer Miracast so I'm hoping some of the other phone manufactures will include it.

Yes Mirracast is not working on Nougart but does work on Marshmellow

I can confirm that Miracast DOES NOT work on Nougat. This is so frustrating. I had to downgrade to Marshmallow Miracast is flawless on M. I have tried every ROM under the sun with the same results. Miracast FAILS to display with Nexus 6 and Nougat.

mblender1969 said:
I can confirm that Miracast DOES NOT work on Nougat. This is so frustrating. I had to downgrade to Marshmallow Miracast is flawless on M. I have tried every ROM under the sun with the same results. Miracast FAILS to display with Nexus 6 and Nougat.
Click to expand...
Click to collapse
I had to buy a Chromecast because of this "bug" on Nougat, btw now I'm going to go back to Marshmallow on my 6P, since my 5X already died in a bootloop.

Hey there,
is this an Nexus 5X problem only? I'm using a OnePlus 3T with Android 7.0 and had also trouble connecting to my Microsoft Wireless Display Adapter plugged into my car radio. It always tried to connect while showing "Connecting..." but then just stopped. Somehow I managed to establish the connection, the problem is I don't know how.
I tried multiple things:
- Connecting from while Airplane Mode ist active
- Connecting while being connected via Bluetooth
- Switching to 2,4GHz WiFi only
None of those settings seemed to work so I switched them all back.
The day it finally worked I did the following:
- I was in the car with a friend who helped me out with trying to connect the device. About 30 connection tries after with multiple different settings (see above) were unsuccessful.
- I've been at his place about 2 hours, doing nothing special on the phone.
- When I got in the car afterwards, my OnePlus 3T could not find the wireless display adapter.
- After I stopped the engine (which does NOT turn off/reset the adapter) the phone could find the Miracast stick and the connection worked.
The last time the connection was successful before this point (I had to reset my device for rooting purposes) the connection always worked, after it was established the first time.

Yes, confirmed. Miracast is not working on Nougat. On Marshmallow it's working just fine.

Confirm, miracast wont work on Android 7. But also got weird acting. Its casting itself to neighbors TVs without me turning cast on. That is loose of privacy And security, i also seen the content What my neighbors whatching on theirs YouTube TV. How to fix issue, do anyone face same problem?

Its working on LineageOS, but yes doesn't work on nougart

Fixed mine just now. In addition to the previous build prop fix, remove the pound from sdm.debug.downscale_external=1

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my HTC using XDA-Developers Legacy app

target173 said:
Fixed mine just now. In addition to the previous build prop fix, remove the pound from sdm.debug.downscale_external=1
Click to expand...
Click to collapse
I don't have this line commented... I added it but it doesn't work anyway.

zor0nel said:
I don't have this line commented... I added it but it doesn't work anyway.
Click to expand...
Click to collapse
Same result for me. Works fine on lineage. I'm preferring stock lollipop with some nice launcher, wallpapers and modes to enhance performance. Everything just works

Can't connect my black shark 3 to laptop

My black shark 3 only charges when connected to laptop. There is no pop up to connect it to laptop please help

I'm having the same problem. it used to be fine and then all the sudden, it doesn't connect to the pc anymore.

Good afternoon!
I am from Brazil and I have the same problem unfortunately and without a solution so far and I believe it is a physical defect ....
Before I suspected that the last security update of the month 12/2020 could have caused this but seeing this topic there are people with this problem since 09/2020, that is before the android security update ...
I follow the topic to see if someone gives a light because mine is the same way I connect on the PC with his original usb cable and the device just keeps charging and does not open the menu to select the data transfer mode and even if I go to "Developer options" and enter usb settings and leave selected data transfer, nothing happens unfortunately it just keeps charging and doesn’t connect with the computer.
I did tests with other usb cables and nothing and also tried to connect to a Macbook Air and the same thing the device only charges and nothing else.
Detail the OTG function of it works normally because I connected an OTG adapter with a pen drive and recognized it normally in the cell phone and became the only way to transfer his data to a pc using the otg adapter and a pen drive for this solution.

try closing google chrome on your laptop , then connecting your phone.

Lizzo said:
try closing google chrome on your laptop , then connecting your phone.
Click to expand...
Click to collapse
Good afternoon Lizzo !!
Boy, I thank you for the tip, but I've done it here and nothing ...
In fact I've tried I believe that everything ...
I have already restored the device and nothing to recognize on the PC.
I entered recovery connected to the pc and nothing to recognize.
I plugged in 2 different pcs and a notebook nothing.
I plugged in a 2011 Macbook air and nothing to recognize.
I plugged in normal USB 2.0 and 3.0 also nothing to recognize.
I called the multimedia in my car that mirrors the image of the cell phone and also nothing to recognize the cell phone.
Anyway it only charges when connected to any USB and the OTG function normally works because I connect a samsung adapter that I have and a pen drive and it recognizes normally ....
In other words, unfortunately a device of 400 USD that presents an idiotic defect like that of not connecting to the pc unfortunately ....
Even so I thank you for the tip and I'll keep an eye out to see if anyone else gives a tip.
Thank you all.

I have been thinking that I had the same problem, so I contacted the customer support and they told me to do this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello
Enable dev mode by click 5 times in setting-about your phone, and search usb configuration in the sear bar, find default usb configuration and choose file transfile.
I tried it and it didn't work, so I tried everything I could think of and connected the phone to an old windows computer (I was using apple computers) and it worked, it seems that Mac os doesn't detect the phone while windows ones do.
So if you guys are trying with Mac os, maybe you had the same problem.