My black shark 3 only charges when connected to laptop. There is no pop up to connect it to laptop please help
I'm having the same problem. it used to be fine and then all the sudden, it doesn't connect to the pc anymore.
Good afternoon!
I am from Brazil and I have the same problem unfortunately and without a solution so far and I believe it is a physical defect ....
Before I suspected that the last security update of the month 12/2020 could have caused this but seeing this topic there are people with this problem since 09/2020, that is before the android security update ...
I follow the topic to see if someone gives a light because mine is the same way I connect on the PC with his original usb cable and the device just keeps charging and does not open the menu to select the data transfer mode and even if I go to "Developer options" and enter usb settings and leave selected data transfer, nothing happens unfortunately it just keeps charging and doesn’t connect with the computer.
I did tests with other usb cables and nothing and also tried to connect to a Macbook Air and the same thing the device only charges and nothing else.
Detail the OTG function of it works normally because I connected an OTG adapter with a pen drive and recognized it normally in the cell phone and became the only way to transfer his data to a pc using the otg adapter and a pen drive for this solution.
try closing google chrome on your laptop , then connecting your phone.
Lizzo said:
try closing google chrome on your laptop , then connecting your phone.
Click to expand...
Click to collapse
Good afternoon Lizzo !!
Boy, I thank you for the tip, but I've done it here and nothing ...
In fact I've tried I believe that everything ...
I have already restored the device and nothing to recognize on the PC.
I entered recovery connected to the pc and nothing to recognize.
I plugged in 2 different pcs and a notebook nothing.
I plugged in a 2011 Macbook air and nothing to recognize.
I plugged in normal USB 2.0 and 3.0 also nothing to recognize.
I called the multimedia in my car that mirrors the image of the cell phone and also nothing to recognize the cell phone.
Anyway it only charges when connected to any USB and the OTG function normally works because I connect a samsung adapter that I have and a pen drive and it recognizes normally ....
In other words, unfortunately a device of 400 USD that presents an idiotic defect like that of not connecting to the pc unfortunately ....
Even so I thank you for the tip and I'll keep an eye out to see if anyone else gives a tip.
Thank you all.
I have been thinking that I had the same problem, so I contacted the customer support and they told me to do this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello
Enable dev mode by click 5 times in setting-about your phone, and search usb configuration in the sear bar, find default usb configuration and choose file transfile.
I tried it and it didn't work, so I tried everything I could think of and connected the phone to an old windows computer (I was using apple computers) and it worked, it seems that Mac os doesn't detect the phone while windows ones do.
So if you guys are trying with Mac os, maybe you had the same problem.
Related
I'm new to Win7 (new workstation just a few days ago) and when I plug up my phone to charge or move files around, I'm prompted with this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Clearly, I don't want Windows mucking about with my phone, but I am curious why it thinks there is something wrong with it. The phone has been flawless since day one and I'm fairly certain there is nothing wrong with it.
Anyone have any thoughts?
It's just the filesystem for the SD card. Odds are you've unplugged the phone too many times from the USB cord while USB Mass Storage was turned on. Go ahead and let Windows 7 scan and fix the SD card, it'll just prevent any errors in the future.
drmacinyasha said:
It's just the filesystem for the SD card. Odds are you've unplugged the phone too many times from the USB cord while USB Mass Storage was turned on. Go ahead and let Windows 7 scan and fix the SD card, it'll just prevent any errors in the future.
Click to expand...
Click to collapse
Cool, thanks. I was afraid Bill Gates was out to get me.
i had the same thing happen the other day. You will also see that same message if you use USB keys long enough. no worries...let the scan run...it may take a bit.
Should users eject the SD card from inside Windows before disabling USB mass storage on the Evo? I don't know which is preferred, but I would imagine that ejecting in Windows is best.
Currently, I don't eject in Windows since I did it a couple of times on launch day and ended up corrupting my card.
I usually just change the setting on the phone back to "charge only" then unplug it. I suppose it wouldn't hurt to safely eject it from Windows after doing that, then finally unplug it.
I always thought you should eject from windows first, change back to charge only, and then unplug it. That's what I usually do anyway, ever since I first corrupted sd cards on my Hero.
well, this is rather embarrassing, I can't seem to find a way to use the phone as mass storage like I did with T989.
I just got it today brand new, already rooted via odin > cwm method.
When I plug in usb cord, I can only access it via MTP but it won't let me transfer large 700mb file.
Enter Settings and tap "Storage". There you should have a menu icon (the vertical triple blocks - on my tablet it's in the top/right - YMMV) which gives you a option called "USB computer connection". Tap it, change from "Media Device (MTP)" to "Mass Storage".
B.Jay said:
Enter Settings and tap "Storage". There you should have a menu icon (the vertical triple blocks - on my tablet it's in the top/right - YMMV) which gives you a option called "USB computer connection". Tap it, change from "Media Device (MTP)" to "Mass Storage".
Click to expand...
Click to collapse
Nope, I dont see any settings under settings-> storage
I get options when I hook up my phone to the pc..but it only has MTP and Camera...no mass storage
Sent from my SGH-T889 using xda app-developers app
lalab0y said:
I get options when I hook up my phone to the pc..but it only has MTP and Camera...no mass storage
Click to expand...
Click to collapse
In this case your SGN2 doesn't seem to support Mass Storage mode. It's there on my SGT10.1 running CM10.
For anyone with a similar problem, the white USB cable that comes with this phone (in some systems like mine) doesn't send data to computers - it only supplies power.
Many people have reported this and I just confirmed it on my system. I connected my NOte 2 to my system with 5 other usb cords and my system found the device. Every time I connected it with the Samsung white usb cable, the computer doesn't see the Note 2.
Either Samsung did something with this usb cable or they really are sending a lot of defective usb cables out.
Dawgneck said:
For anyone with a similar problem, the white USB cable that comes with this phone (in some systems like mine) doesn't send data to computers - it only supplies power.
Many people have reported this and I just confirmed it on my system. I connected my NOte 2 to my system with 5 other usb cords and my system found the device. Every time I connected it with the Samsung white usb cable, the computer doesn't see the Note 2.
Either Samsung did something with this usb cable or they really are sending a lot of defective usb cables out.
Click to expand...
Click to collapse
Thats not true i always use the white usb on my computer..... Its just hit or miss sometimes
I'm not able to mount it as a mass storage device either, my only options are "Media Device" or "Camera", neither of which show up as an actual drive on my windows machine. and i'm not using the white usb cord that came with it, i'm using my own cord that i've used for years, and with many other devices.
Dawgneck said:
For anyone with a similar problem, the white USB cable that comes with this phone (in some systems like mine) doesn't send data to computers - it only supplies power.
Many people have reported this and I just confirmed it on my system. I connected my NOte 2 to my system with 5 other usb cords and my system found the device. Every time I connected it with the Samsung white usb cable, the computer doesn't see the Note 2.
Either Samsung did something with this usb cable or they really are sending a lot of defective usb cables out.
Click to expand...
Click to collapse
What? No. This is not true ^^^^
Sent from my SGH-T889 using Tapatalk 2
Coming to think about it (totally forgot about it)...
Maybe give Easy UMS a try. I use it on my SGS3 for USB Mass-Storage Mode, and according to the thread it also seems to work on the Note 2.
Though, keep in mind:
This app will make the external (not the internal!) microSD card of your Samsung Galaxy S3 (International, US versions, International LTE) available as USB mass storage device.
Easy UMS WORKS!
B.Jay said:
Maybe give Easy UMS a try. I use it on my SGS3 for USB Mass-Storage Mode, and according to the thread it also seems to work on the Note 2.
Click to expand...
Click to collapse
I'm running Jedi-X V1 (wanted MultiView real bad, which works sweetly) on my T-Mobile GNote2 and Easy UMS worked GREAT.
It's usage is not extremely intuitive: Click the UMS button to make it run in mass storage mode, attach to computer, do your file transfer thing, SAFELY EJECT when done, wait a few seconds, then click "Mount SD" to get the card back for your android to use.
After using the phone I went to re-connect it to the computer, and found that a couple of apps were using the SD card, so I long-pressed home, clicked Task Manager (the pie graph at the bottom) and used the Clear Memory function to kill innactive apps, freeing the card up to be unmounted and UMSed,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note: YOU MUST BE ROOTED FOR THIS APP TO WORK. And it only shares the external SD card.
How do I get my 2013 Chevrolet Silverado to recognize that my phone is connected? When I change source it just tells me to connect a device after connecting one and the same even if it is connected before changing sources. I have Minco ROM 4.2.1 running Franco kernel 364. I turned off USB debugging in the phone's developer options and disabled the USB fast charge in the kernel settings. I even rebooted after disabling those.
I'm thinking the problem is due to the nexus not having an SD card confuses it but then again should any music being played on the phone be sent through to the truck's radio/speakers as well?
"Insert a disc, USB, or Aux stereo device" is what my truck tells me when I switch to the source that should allow the stereo to recognize my phone. I've tried different cables and after researching all weekend I think the problem is this crappy Media Transfer Protocol since the Nexus doesn't have a standalone SD card. But I still can't find a solution. Does anyone know of an app, MOD, or kernel that can fix my issue?
I understand your pain. However, I'm not sure the GNex can push audio through the USB port. Not sure if other headsets do this, never really attempted to, but the only cheap solution for you right now is to use an auxiliary cable or if you're willing to spend the money, an OEM car dock. I have one and it works fantastically, charges and plays audio through pogo pins.
If your device is a nexus there's nothing you can do because you don't have mass storage mode available. In that case, the nexus only can connect in MTP mode (media transfer protocol), and probably your truck's media player does not recognize that protocol. I have an Alpine and only supports mass storage mode, in case helps you.
You can, howerer, use a male-male 3.5mm jack and connect from the phone to the truck input, like if you were on headphones but directly to your car or truck.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
That's what I thought :/ I was hoping there was a way to partition the drive and use a kernel that enables ums mode so I could do this. I'd rather not have two cables connected and have to control through my phone instead of the stereo/steering wheel
If you want UMS on devices that don't have it, you can use DriveDroid from market (there's both free and paid). With it, create a blank file that will be used as "partition". Then you can connect your phone to your computer and put there the songs you want. Then do the same in the car. For example, in my Nexus 7 I've created a 2 GB file which serve for that purpose (takes a while when is big).
http://forum.xda-developers.com/showpost.php?p=39203658&postcount=21
I just received it today went through the initial setup and restarted it, I am now getting the Connecting to Google...message for 1 hour. I have tired using LAN and Wireless resetting several times and no success.
Now the bad news is, no way to get into fastboot on this device using the hold the power button down, since the new version doesn't have a micro-usb port nor a power button.
docangle said:
I just received it today went through the initial setup and restarted it, I am now getting the Connecting to Google...message for 1 hour. I have tired using LAN and Wireless resetting several times and no success.
Now the bad news is, no way to get into fastboot on this device using the hold the power button down, since the new version doesn't have a micro-usb port nor a power button.
Click to expand...
Click to collapse
to get into fastboot you have to use the usb port farthest away from hdmi port. with usb 3 male to male cable.
brandonb21 said:
to get into fastboot you have to use the usb port farthest away from hdmi port. with usb 3 male to male cable.
Click to expand...
Click to collapse
I have a USB-A to USB-C Cable. I tried it in both ports, but still can't figure out how to get into fastboot without a power button. When I connect to PC, I am not prompted for drivers.
docangle said:
I have a USB-A to USB-C Cable. I tried it in both ports, but still can't figure out how to get into fastboot without a power button. When I connect to PC, I am not prompted for drivers.
Click to expand...
Click to collapse
did you enable USB transfer on the shield, if not, its under storage in settings menu.
brandonb21 said:
did you enable USB transfer on the shield, if not, its under storage in settings menu.
Click to expand...
Click to collapse
as i stated above, l haven't been able to get past the Connecting to Google message, which is the reason i am trying to reset the unit via bootmenu/fastboot.
I purchased two units and the other one is working fine, but the remote is no longer fast scrolling after it did a firmware update(another words when i try to scroll through my apps list on the main screen I have to keep pressing the right part of the remote repeatedly instead of holding it down. it also highlights the current position in green, it didn't do this before the update.
I get it today.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Do you have another Android Phablet? Yeah I guess someone had to throw it out there. 'Cause it sounds to me like its (i.e. the Shield), is waiting on some 2FA from a Phablet, PC, Note/Net-book to port your otherwise current Google Account over to the Shield.
So barring the rest of it. Do you even have a Google Account? Again I can only assume that some People have a more fruity lifestyle than others. So please don't take to much offence at this.
'Cause on just on the off chance that you don't.... This will almost certainly be your problem. I can't really, say that I have fully as such exhausted every option in that setup mode. As it was clearly, setup to be paired though a Phablet. Which I have, and am using to post this very Message. So it's a bit of a non starter, for me.
Ichijoe said:
Do you have another Android Phablet? Yeah I guess someone had to throw it out there. 'Cause it sounds to me like its (i.e. the Shield), is waiting on some 2FA from a Phablet, PC, Note/Net-book to port your otherwise current Google Account over to the Shield.
So barring the rest of it. Do you even have a Google Account? Again I can only assume that some People have a more fruity lifestyle than others. So please don't take to much offence at this.
'Cause on just on the off chance that you don't.... This will almost certainly be your problem. I can't really, say that I have fully as such exhausted every option in that setup mode. As it was clearly, setup to be paired though a Phablet. Which I have, and am using to post this very Message. So it's a bit of a non starter, for me.
Click to expand...
Click to collapse
I did use my Nexus 6P to set up the Nvidia Shield. It completed, told me I had a firmware update at which point I clicked the install and restart button. Update installed and restarted again, at which point I got the Connecting to Google.. message.
I just managed to fix it! I decided to change the language (since that was one of the few things I could do.) It gave me a weird message, and proceeded with the startup. I have to figure out how to change the language back to English, but once I did it is working normal.
Hello,
is there a method that i could connect my usb-c over ethernet adapter to my pc from the phone allowing it to share internet from it?
I know the option ethernet over thetering was implemented in stock Android 11 rom but why was it removed from realme UI i don't understand (correct me if i'm wrong)
The order it's Phone Tethering --> Usb-c to ethernet adapter --> Windows System
And will this function be implemented in realmeUI 3.0? because that option remained also in OneUI 4.0 (samsung).
Hope for an answer.
Regards.
- EarlyGamer45
EarlyGamer45 said:
Hello,
is there a method that i could connect my usb-c over ethernet adapter to my pc from the phone allowing it to share internet from it?
I know the option ethernet over thetering was implemented in stock Android 11 rom but why was it removed from realme UI i don't understand (correct me if i'm wrong)
The order it's Phone Tethering --> Usb-c to ethernet adapter --> Windows System
And will this function be implemented in realmeUI 3.0? because that option remained also in OneUI 4.0 (samsung).
Hope for an answer.
Regards.
- EarlyGamer45
Click to expand...
Click to collapse
its not removed you can find it under usb tethering
Where?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
EarlyGamer45 said:
Where?
View attachment 5561055
Click to expand...
Click to collapse
there ^^;
Hello,
I mean ethernet tethering option, it's like sharing internet access via ethernet adapter. I know that option it's on Samsung and Android stock devices.
EarlyGamer45 said:
Hello,
I mean ethernet tethering option, it's like sharing internet access via ethernet adapter. I know that option it's on Samsung and Android stock devices.
Click to expand...
Click to collapse
thats it its the same option im tethering from my phone to my adapter for my kids ^^;
but you need to use the cable
Ok I already tried that.
I connected the adapter to my phone into my pc then the adapter turns on in OTG but the usb tethering doesn't light up.
EarlyGamer45 said:
Ok I already tried that.
I connected the adapter to my phone into my pc then the adapter turns on in OTG but the usb tethering doesn't light up.
Click to expand...
Click to collapse
you cant use it if you chose transfer file you must chose charge only to use it ^^ like this ^^
I know but when I plug the adapter in power mode the usb tethering option isn't lighted up. Otg is required to at least power on the adapter.. I don't know
EarlyGamer45 said:
I know but when I plug the adapter in power mode the usb tethering option isn't lighted up. Otg is required to at least power on the adapter.. I don't know
Click to expand...
Click to collapse
maybe you need another cable to work other then the one that your using i used the cable that came with the phone and it works with me
maybe you don't understand, i wanted to connect my phone with RJ45 adapter to my pc not use an usb to connect my pc via tethering https://www.google.com/search?q=rj4...&biw=1920&bih=904&dpr=1#imgrc=SVBP8DUya15ZzMi
i could try using the rj45 adapter connected to the pc and then using a usb dongle to connect the normal cable to ethernet, i only wanted to use wired hotspot without charging the battery because keeping it forever at 100% it's not that good.
EarlyGamer45 said:
maybe you don't understand, i wanted to connect my phone with RJ45 adapter to my pc not use an usb to connect my pc via tethering https://www.google.com/search?q=rj4...&biw=1920&bih=904&dpr=1#imgrc=SVBP8DUya15ZzMi
i could try using the rj45 adapter connected to the pc and then using a usb dongle to connect the normal cable to ethernet, i only wanted to use wired hotspot without charging the battery because keeping it forever at 100% it's not that good.
Click to expand...
Click to collapse
i dont think you can do it this way ^^;
bruh it's strange that only ColorOS removed this option...
so i can close the discussion now.
the screen is from stock android 11
EarlyGamer45 said:
bruh it's strange that only ColorOS removed this option...
so i can close the discussion now.
the screen is from stock android 11
Click to expand...
Click to collapse
yeap