Develop Bugs

The image file is corrupt

Every time I try to run USL or update the ROM I get this error message after about 3-5%: The image file is corrupt. Can you help?

bring your device into bootloader mode , connect via as and try again!

ghiatti1 said:
Every time I try to run USL or update the ROM I get this error message after about 3-5%: The image file is corrupt. Can you help?
Click to expand...
Click to collapse
I sometimes get this if my firewall and antivirus is enabled

Antivirus and Firewall are disabled.
I tried to enter the bootloader mode by pressing the record key and reset, but the PDA just resets.

this is how you enter bootloader:
http://wiki.xda-developers.com/index.php?pagename=Artemis_Resets

Just wanted to let you know that I have managed to update the ROM. I cannot tell why but it worked the 10th time! Sorry I cannot give any siggestions to anyone with the same problem.

I got this error when trying to install newest Codon Rom on my device without cid-unlocking the device before. After I cid-unlocked the rom I did not get the "image corrupt" warning.
I did not try to reproduce it after I installing the rom, maybe you could give this a try.
regards,
Daniel

[Q] Is it bricked?

so today i was updating my wildfire s' RUU and for some reason, it stopped and gave me a "cannot connect" error.
Now my phone wont turn on... it wont even go into hboot. what do i do now?
EDIT: it gives off two vibrations when trying to turn on but does nothing else

estabien said:
so today i was updating my wildfire s' RUU and for some reason, it stopped and gave me a "cannot connect" error.
Now my phone wont turn on... it wont even go into hboot. what do i do now?
EDIT: it gives off two vibrations when trying to turn on but does nothing else
Click to expand...
Click to collapse
The vibrations mean that it is in Qualcomm diagnostics mode......there was a thread in this forum about this.

oh crap im not feeling vibrations anymore....
edit how do i get into download mode

estabien said:
so today i was updating my wildfire s' RUU and for some reason, it stopped and gave me a "cannot connect" error.
Now my phone wont turn on... it wont even go into hboot. what do i do now?
EDIT: it gives off two vibrations when trying to turn on but does nothing else
Click to expand...
Click to collapse
Maybe try this one...
eoghan2t7 said:
there a way to fix it by creating a goldcard and run the ruu now press ctrl+r and type %temp% once your temp folder loads do a search in the temp folder for rom.zip rename that to to cant remember ill edit this post in a minute with the name you now copy the renamed file to the root of your sdcard and boot the phone as if you were going into hboot leave the phone for half and hour to 45 minutes to be on the safe side you the pull the battery and put it in again now try and boot your phone that worked on my mates wfs lets hope it works for you.
edit: rename it to PG76DIAG.zip its case senseitive.
p.s. most of the custom roms here are for gsm handsents and NOT cdma.
Click to expand...
Click to collapse
its from :
http://forum.xda-developers.com/newreply.php?do=newreply&p=19797955

i think i can do it if i could just get into download mode...
none of the methods that i have found are working.
also, i did what the quoted text said and i got "no results match your query" what does it mean by run the ruu... i opened it and just minimized it.
edit: i guess i flashed the wrong ruu... it was probably vm uk, heh heh.

estabien said:
i think i can do it if i could just get into download mode...
none of the methods that i have found are working.
also, i did what the quoted text said and i got "no results match your query" what does it mean by run the ruu... i opened it and just minimized it.
edit: i guess i flashed the wrong ruu... it was probably vm uk, heh heh.
Click to expand...
Click to collapse
Run the HTC ROM Install
then open "Run"- if with Windows and type %TEMP%
that leads you to the temp dir and then search for a file rom.zip, rename it and put it in you card...

i did exactly that and it still shows no results...
should i redownload the rom and just get the file?

HTC One M9 stuck on phone decrypt screen - factory reset doesn't work.

Edited to add data I found in recovery mode:
"HTC/htc_himauhl/htc_himauhl
6.0/MRA58K/buildteam10121728"
And there are a bunch of error messages ending in:
"E: failed to mount /cache (Invalid argument).. try emmc mount)
E: Can't find device node for mount point /cache"
Can anybody point me to a good resource explaining how I can attempt to apply an image from the sd card?
Or how to check if usb debugging is switched on?
Original post:
When I unplugged my HTC M9 this morning it was on a screen saying the phone is encrypted and prompts to enter the screen lock password. I enter what I think is the correct code (I've been using pattern unlock but put in the code i used to use) and it tells me its correct but the data is corrupted and it needs to do a factory reset.
There is no other option apart from accepting the factory reset.
When I accept the factory reset it just says 'rebooting...' and then never does (I waited an hour).
I've tried the obvious holding down volume up and power off.
I can get to the options screen to choose reboot, download mode, recovery etc. I tried reboot (obviously) but it only boots back to the decrypt screen. I also tried recovery mode and I got a picture of a phone with a red warning triangle containing an exclamation mark and nothing else happened. I tried pressing power and volume up and it just rebooted back to the decrypt screen.
It says it is:
***Software status: Official ***
*** LOCKED ***
*** S-ON ***
It's a carrier-free version, bought from Amazon UK. I haven't done anything to it (I used to root and flash custom roms but not for 2-3 years - I have a nearly 2-year old - so my knowledge is mostly forgotten and out of date).
I have no reason to think that usb debugging is on so I'm worried that there is nothing I can do.
Edit: Maybe I can install something from the sd card. I'm going to try that.
Any suggestions greatly appreciated.

srjones said:
Edited to add data I found in recovery mode:
"HTC/htc_himauhl/htc_himauhl
6.0/MRA58K/buildteam10121728"
And there are a bunch of error messages ending in:
"E: failed to mount /cache (Invalid argument).. try emmc mount)
E: Can't find device node for mount point /cache"
Can anybody point me to a good resource explaining how I can attempt to apply an image from the sd card?
Or how to check if usb debugging is switched on?
Original post:
When I unplugged my HTC M8 this morning it was on a screen saying the phone is encrypted and prompts to enter the screen lock password. I enter what I think is the correct code (I've been using pattern unlock but put in the code i used to use) and it tells me its correct but the data is corrupted and it needs to do a factory reset.
There is no other option apart from accepting the factory reset.
When I accept the factory reset it just says 'rebooting...' and then never does (I waited an hour).
I've tried the obvious holding down volume up and power off.
I can get to the options screen to choose reboot, download mode, recovery etc. I tried reboot (obviously) but it only boots back to the decrypt screen. I also tried recovery mode and I got a picture of a phone with a red warning triangle containing an exclamation mark and nothing else happened. I tried pressing power and volume up and it just rebooted back to the decrypt screen.
It says it is:
***Software status: Official ***
*** LOCKED ***
*** S-ON ***
It's a carrier-free version, bought from Amazon UK. I haven't done anything to it (I used to root and flash custom roms but not for 2-3 years - I have a nearly 2-year old - so my knowledge is mostly forgotten and out of date).
I have no reason to think that usb debugging is on so I'm worried that there is nothing I can do.
Edit: Maybe I can install something from the sd card. I'm going to try that.
Any suggestions greatly appreciated.
Click to expand...
Click to collapse
This is the M9 forum, so the advice we have here is for that device. Head over to the M8 forum for help specifically tailored to your phone.

Typo!
computerslayer said:
This is the M9 forum, so the advice we have here is for that device. Head over to the M8 forum for help specifically tailored to your phone.
Click to expand...
Click to collapse
Thanks, sorry, it is an M9. I initially thought it was an M8 and had to google the difference so I must have been thinking of that. Have edited the post now

srjones said:
Thanks, sorry, it is an M9. I initially thought it was an M8 and had to google the difference so I must have been thinking of that. Have edited the post now
Click to expand...
Click to collapse
In that case, check out the readme thread at the top of this forum. It has all you'll need to find the correct RUU and apply it properly.

computerslayer said:
In that case, check out the readme thread at the top of this forum. It has all you'll need to find the correct RUU and apply it properly.
Click to expand...
Click to collapse
Thanks for your reply, but are you sure? As I said in my post, the device is locked, S-ON and usb debugging is not switched on and I cant get into the phone to turn it on. The normal instructions seem to assume that I can turn usb debugging on.
Thanks again for your time

srjones said:
Thanks for your reply, but are you sure? As I said in my post, the device is locked, S-ON and usb debugging is not switched on and I cant get into the phone to turn it on. The normal instructions seem to assume that I can turn usb debugging on.
Thanks again for your time
Click to expand...
Click to collapse
I am sure ...and the readme thread explains this too. Take some time to read through it, especially the post about RUUs.
You mention not getting the phone to turn on....do you mean that it won't power on at all or that it won't boot? If it does turn on, what do you see?
[EDIT] Re-reading your original post, you say that you can get into download mode. If this is still the case, then you should be able to apply the appropriate RUU. Again, the readme thread has all you need to get that going[/EDIT]

Thank you, you've been incredibly patient. I'd got a bit discouraged at the scale of the problem. It makes it much easier to know that a fix should be possible at the end of the process.

srjones said:
Thank you, you've been incredibly patient. I'd got a bit discouraged at the scale of the problem. It makes it much easier to know that a fix should be possible at the end of the process.
Click to expand...
Click to collapse
The first time going through this kind of thing is always a bit intimidating. After going through it a few times it becomes familiar.
Read through the RUU section in the readme thread. As it'll describe, you'll need your OS version to determine your SKU which will lead you to the right RUU and so on. Post here if you've got questions along the way.

computerslayer said:
The first time going through this kind of thing is always a bit intimidating. After going through it a few times it becomes familiar.
Read through the RUU section in the readme thread. As it'll describe, you'll need your OS version to determine your SKU which will lead you to the right RUU and so on. Post here if you've got questions along the way.
Click to expand...
Click to collapse
Hi, I've been reading post #3 in the reader (all seems very straightforward, I feel foolish for not persisting in the first place). I still need to get a card reader to get a ruu onto the card from my pc but im trying to get the right ruu ready now.
In download mode I have a line that says OS-3.35.401.32
I think this means that I look in the SKU 401 section but then there isn't a file for my exact number, the closest ends in .12 rather than .32
Does this mean that I need to look in other places to get one that matches exactly?
Thanks again

srjones said:
Hi, I've been reading post #3 in the reader (all seems very straightforward, I feel foolish for not persisting in the first place). I still need to get a card reader to get a ruu onto the card from my pc but im trying to get the right ruu ready now.
In download mode I have a line that says OS-3.35.401.32
I think this means that I look in the SKU 401 section but then there isn't a file for my exact number, the closest ends in .12 rather than .32
Does this mean that I need to look in other places to get one that matches exactly?
Thanks again
Click to expand...
Click to collapse
Sounds like you've read it well! Don't be too hard on yourself - there is a lot to take in. From your OS version your SKU is indeed 401.
You're good to use the RUU 3.35.401.12 even though your current version ends in .32 (from the readme: "In other words the part marked with y of x.xx.xxx.yy is allowed to differ whereas x needs to be the same for your current firmware version and the RUU").

computerslayer said:
Sounds like you've read it well! Don't be too hard on yourself - there is a lot to take in. From your OS version your SKU is indeed 401.
You're good to use the RUU 3.35.401.12 even though your current version ends in .32 (from the readme: "In other words the part marked with y of x.xx.xxx.yy is allowed to differ whereas x needs to be the same for your current firmware version and the RUU").
Click to expand...
Click to collapse
Aah, thanks. Amazing what I can miss even after I think I've read it "thoroughly".

computerslayer said:
The first time going through this kind of thing is always a bit intimidating. After going through it a few times it becomes familiar.
Read through the RUU section in the readme thread. As it'll describe, you'll need your OS version to determine your SKU which will lead you to the right RUU and so on. Post here if you've got questions along the way.
Click to expand...
Click to collapse
Hi, I'm following the Instructions for the SD card method from post #3 of the readme. I've just done step 5: "You will be asked whether you want to flash the file. Confirm with the volume up button"
The phone is now vibrating regularly every (approx) 3 seconds and flashing a silver HTC logo on the screen. I'm pretty sure this isn't normal. This isn't normal, right?
It's been doing it for several minutes.
Do you have any suggestions? Maybe leave it for a good long while and then try holding down power and volume up?

srjones said:
Hi, I'm following the Instructions for the SD card method from post #3 of the readme. I've just done step 5: "You will be asked whether you want to flash the file. Confirm with the volume up button"
The phone is now vibrating regularly every (approx) 3 seconds and flashing a silver HTC logo on the screen. I'm pretty sure this isn't normal. This isn't normal, right?
It's been doing it for several minutes.
Do you have any suggestions? Maybe leave it for a good long while and then try holding down power and volume up?
Click to expand...
Click to collapse
It doesn't seem normal, I must admit. I think I'd let it go for about 30 minutes to see if it is rebooting as part of the RUU installation. After that, I'd force it to power off and re-try the attempt - though I might re-download the RUU matching my SKU and use that instead. It could be that your download got corrupted.
There is a way to check the MD5 sum of your download to confirm the integrity of your file. I haven't done that in a while, but I recall that there are plenty of tools easily available (Google will help you here).

computerslayer said:
It doesn't seem normal, I must admit. I think I'd let it go for about 30 minutes to see if it is rebooting as part of the RUU installation. After that, I'd force it to power off and re-try the attempt - though I might re-download the RUU matching my SKU and use that instead. It could be that your download got corrupted.
There is a way to check the MD5 sum of your download to confirm the integrity of your file. I haven't done that in a while, but I recall that there are plenty of tools easily available (Google will help you here).
Click to expand...
Click to collapse
Thanks, the MD5 sum is fine (managed to take in that bit of the read me).
I tried to use the ruu again just to be sure but there's no difference.
I think it's not able to apply the ruu at all. It takes no time at all before it does the buzzing/ flashing thing and when i force a restart I still have the exact same error message in recovery mode. Like maybe it started by trying to wipe the cache, couldn't find it, tried to format and mount again, but couldn't find the device node (not totally sure there) and then gave up.
I used to use Linux a long time ago (was never an expert) and if I saw this sort of thing with a pc, I'd be repartitioning the hard drive while googling the price of a new one. I just don't know enough about Android (i know nothing about Android) to work it out though.
I took a photo of the error message using another phone, is it worth trying to post it? I don't know how to do that and will have to spend time finding out which is why I'm asking rather than just posting out.

srjones said:
Thanks, the MD5 sum is fine (managed to take in that bit of the read me).
I tried to use the ruu again just to be sure but there's no difference.
I think it's not able to apply the ruu at all. It takes no time at all before it does the buzzing/ flashing thing and when i force a restart I still have the exact same error message in recovery mode. Like maybe it started by trying to wipe the cache, couldn't find it, tried to format and mount again, but couldn't find the device node (not totally sure there) and then gave up.
I used to use Linux a long time ago (was never an expert) and if I saw this sort of thing with a pc, I'd be repartitioning the hard drive while googling the price of a new one. I just don't know enough about Android (i know nothing about Android) to work it out though.
I took a photo of the error message using another phone, is it worth trying to post it? I don't know how to do that and will have to spend time finding out which is why I'm asking rather than just posting out.
Click to expand...
Click to collapse
It's certainly better than nothing - and I'm interested to hear more about an error message. I haven't applied a RUU in a while, but I don't recall the phone ever booting into recovery.

Try formatting data in TWRP recovery. It will wipe your internal memory though. This fixes the issue on the 10.

computerslayer said:
It's certainly better than nothing - and I'm interested to hear more about an error message. I haven't applied a RUU in a while, but I don't recall the phone ever booting into recovery.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Ok, it doesn't boot into recovery mode straight away, it just dies a bootloop. I then hold down various buttons to get to the boot loader. Hopefully I've added the picture correctly.
Edit: I can't see the photo. I don't know why it's not working. It is here https://imgur.com/gallery/vkP5Z
Did I do something stupid? Is imgur not the right thing to use?

side_flip15 said:
Try formatting data in TWRP recovery. It will wipe your internal memory though. This fixes the issue on the 10.
Click to expand...
Click to collapse
Thanks, I'm not sure what 'Formatting data in TWRP recovery' means. Posts #4 and #5 of the readme mention TWRP. Do i need to download one of the linked backups and use it to restore?

srjones said:
Thanks, I'm not sure what 'Formatting data in TWRP recovery' means. Posts #4 and #5 of the readme mention TWRP. Do i need to download one of the linked backups and use it to restore?
Click to expand...
Click to collapse
Let's back up a step - do you have TWRP installed? Unless you received the phone from someone who installed it themselves, you'd have to have done this yourself (by unlocking the bootloader & flashing TWRP via ADB) - so if you don't know, you probably don't.
If you did receive the phone from someone else and want to check:
boot into download mode (PWR-VOLDWN)
use the volume keys to highlight 'boot into bootloader' and the power key to select that option once it is highlighted
use the volume keys to highlight 'boot into recovery' & the power key to select that option once it's highlighted
If you have TWRP installed, you'll see the blue TWRP logo and name. Otherwise you'll be loaded into the stock Android recovery. You can back out by using the volume keys to navigate and the power button to select the option to get out.

computerslayer said:
Let's back up a step - do you have TWRP installed? Unless you received the phone from someone who installed it themselves, you'd have to have done this yourself (by unlocking the bootloader & flashing TWRP via ADB) - so if you don't know, you probably don't.
If you did receive the phone from someone else and want to check:
boot into download mode (PWR-VOLDWN)
use the volume keys to highlight 'boot into bootloader' and the power key to select that option once it is highlighted
use the volume keys to highlight 'boot into recovery' & the power key to select that option once it's highlighted
If you have TWRP installed, you'll see the blue TWRP logo and name. Otherwise you'll be loaded into the stock Android recovery. You can back out by using the volume keys to navigate and the power button to select the option to get out.
Click to expand...
Click to collapse
Ah, right, no, nothing non-standard installed. So that's not an option. Thanks

HTC 10 hard bricked

Hello everyone!
I have htc 10 hard bricked. i plug the phone to my pc and "QUSB__BULK". How can i do???
Thaks to all!!

Andoniar78 said:
Hello everyone!
I have htc 10 hard bricked. i plug the phone to my pc and "QUSB__BULK". How can i do???
Thaks to all!!
Click to expand...
Click to collapse
this may be of use?
http://www.droidsavvy.com/unbrick-qualcomm-mobiles/

Thank you for your help andybones.
I can´t do the first method because i can´t see the partitions of my phone. I had donwloaded miniton partition wizard but don´t see partitions and with hdd raw copy tool same. Don´t see partitions so i only can do the second method but i had this error:
Process Index:0
Programmer Path:C:\Users\Ando\Desktop\HTC 10\8675_W00\8675_W00\prog_emmc_firehose_8936.mbn
Image Search Path:C:\Users\Ando\Desktop\HTC 10\8675_W00\8675_W00
Please select the XML file
Patch file number is not match with raw pargram file, abort selection
Start Download
Program Path:C:\Users\Ando\Desktop\HTC 10\8675_W00\8675_W00\prog_emmc_firehose_8936.mbn
COM Port number:3
Sahara Connecting ...
Sahara Version:2
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
en QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
en QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download
THANK YOU AGAIN FOR ALL!

How can you hardbrick HTC 10? im asking so I know what I should not do lol

Was my error.
I was trying to put an original rom because in Spain there is still no ruu for my free version. Find a tutorial to change cid and mid with a ruu for that mid. I made the change from cid and mid, I inserted the "ZIP" inside the SD reboot the phone and gave error. I found a ruu.exe, I ran it, gave another error. I rebooted and already DEAD!

Andoniar78 said:
Was my error.
I was trying to put an original rom because in Spain there is still no ruu for my free version. Find a tutorial to change cid and mid with a ruu for that mid. I made the change from cid and mid, I inserted the "ZIP" inside the SD reboot the phone and gave error. I found a ruu.exe, I ran it, gave another error. I rebooted and already DEAD!
Click to expand...
Click to collapse
Wrong device ruu?
Sent from my HTC 10 using XDA Labs

Yess DeeZZ_NuuZZ.
Because i put other cid and mib and download other ruu Because I did not realize it was htc one. So i can´t turn on my phone and i can´t do nothing....

Andoniar78 said:
Yess DeeZZ_NuuZZ.
Because i put other cid and mib and download other ruu Because I did not realize it was htc one. So i can´t turn on my phone and i can´t do nothing....
Click to expand...
Click to collapse
You've changed CID with sunshine ?
What kind of CID had you try ? Because I wanted to made that on my custom rom in order to have Super CID (11111111) and install the stock HTC's Ruu from EU

sanguine14 said:
You've changed CID with sunshine ?
What kind of CID had you try ? Because I wanted to made that on my custom rom in order to have Super CID (11111111) and install the stock HTC's Ruu from EU
Click to expand...
Click to collapse
Just change your phone to the below:
CID: HTC__001
MID: 2PS620000
That's the WWE one.
Edit: oh and grab the ruu for that.
Sent from my HTC 10 using Tapatalk

hello sanguine14, i had installed by CMD. the cid is good, i think is eeuu cid for put android N but mid is not ok.
Toyny, my phone WAS DIED. Black screen and do not respond. Volumen down + power NOTHING and when i plug de cable "QUSB__BULK". is died!!!!

Andoniar78 said:
Thank you for your help andybones.
I can´t do the first method because i can´t see the partitions of my phone. I had donwloaded miniton partition wizard but don´t see partitions and with hdd raw copy tool same. Don´t see partitions so i only can do the second method but i had this error:
Process Index:0
Programmer Path:C:\Users\Ando\Desktop\HTC 10\8675_W00\8675_W00\prog_emmc_firehose_8936.mbn
Image Search Path:C:\Users\Ando\Desktop\HTC 10\8675_W00\8675_W00
Please select the XML file
Patch file number is not match with raw pargram file, abort selection
Start Download
Program Path:C:\Users\Ando\Desktop\HTC 10\8675_W00\8675_W00\prog_emmc_firehose_8936.mbn
COM Port number:3
Sahara Connecting ...
Sahara Version:2
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
en QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
en QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download
THANK YOU AGAIN FOR ALL!
Click to expand...
Click to collapse
https://forum.xda-developers.com/htc-10/how-to/htc-10-partition-table-t3374048 partition table for WWE phone. don't know if there is anywhere a table for sprint etc because they are different

Hello, thanks for you help but i dont know where can i put this. In linux terminal? because in cmd of windows not recognize comands. when i put in linux "No such file or directory"

Andoniar78 said:
Hello, thanks for you help but i dont know where can i put this. In linux terminal? because in cmd of windows not recognize comands. when i put in linux "No such file or directory"
Click to expand...
Click to collapse
what do you try now?

i´m trying to do this tutorial but isn´t posible!! phone to technical services...
THANK YOU FOR ALL!!!

Andoniar78 said:
i´m trying to do this tutorial but isn´t posible!! phone to technical services...
THANK YOU FOR ALL!!!
Click to expand...
Click to collapse
repair will most likely cost as much as nearly new second Hand xD because they will Change Motherboard I think, but write here if you know more

Phone hard bricked
Cro Cop said:
How can you hardbrick HTC 10? im asking so I know what I should not do lol
Click to expand...
Click to collapse
I dont get it I flashed a "signed firmware" to my HTC 10 S-on mind you and now it wont even turn on or give my qload or anything its completely dead? Is there anything I can do at all? I have tried holding down power and volume keys but nothing at all. every once in a while I may see an amber light for a split second but when I first plug in but nothing after that no Qload HS no beeps no light and no life in the phone of any kind.

Nickw1978 said:
I dont get it I flashed a "signed firmware" to my HTC 10 S-on mind you and now it wont even turn on or give my qload or anything its completely dead? Is there anything I can do at all? I have tried holding down power and volume keys but nothing at all. every once in a while I may see an amber light for a split second but when I first plug in but nothing after that no Qload HS no beeps no light and no life in the phone of any kind.
Click to expand...
Click to collapse
Your post lacks ALL the important details.
What firmware and rom version whas/is it running
What firmware EXACTLY did you flash
Do you have a carrier locked HTC10, do you have a sprint version......
Just telling us you flashed "a" firmware isn't going to cut it.
Cheers

Phone hard bricked
Mr Hofs said:
Your post lacks ALL the important details.
What firmware and rom version whas/is it running
What firmware EXACTLY did you flash
Do you have a carrier locked HTC10, do you have a sprint version......
Just telling us you flashed "a" firmware isn't going to cut it.
Cheers
Click to expand...
Click to collapse
The HTC 10 was running T-mobile but Carrier unlocked, it was S-on but bootloader or HTC dev unlocked/rooted and it had the latest OTA, firmware ETC. I used the "HTC version tool" to change the main version to 1.81.531.1, I found this firmware 2PS6IMG_1.81.531.1_firmware(Signed).zip on a thread of XDA by member named BeHold_this. I downloaded and flashed this rom in RUU mode The phone did the whole fail 90 like normal but instead of restarting RUU mode to where I am suppose to flash it a second time, it went black and never came back. Now when I plug it in to the PC, I get the amber light to flash once maybe twice but thats it I cant get even QLOAD9008 or anything en device manager it doesn't even do that? I have bricked HTCs before and gotten "Qload_HS Download 9008" and "QLOAD_BALK" I had an HTC one M7 that was stuck in "QLOAD_HS_DEBUGGING" and that one I used the "HTC Debricking project" to fix it and that phone still works to this day. but this is different. I have tried holding down every button configuration like power, Vol-up and PWR, VOL-DWN and PWR, Both VOL KEYS AND PWR and nothing not even QLOAD. IS there any magic trick to even make this thing come up in QLOAD_HS mode? Please let me know thank you.

Did pretty much the same with my U 11.
Did you solve or did you end up taking it to service?

One M9 encrypted and no recovery mode

HTC One M9
Android 6
Bootloader Locked
S=On
USB debugging disable
today I found my phone stock on decryption screen! I did not enable encryption mode. now my phone says: your phone is encrypted. to decrypt your phone, enter your Screen lock password.
it does not matter what number I enter! every number I enter, it says: Decryption unsuccessful. the password you entered is correct, but unfortunately, your data is corrupt. to resume using your phone, you need to perform a factory reset. When you set up your phone after the reset, you'll have an opportunity to restore any data that was backed up to your Google Account.
But nothing happened when I press the "reset phone" button. I waited 4 hours but it remains on a window named "Factory data reset, Rebooting..." but it can not proceed to reboot.
when I power off and go to bootloader, I can not go to recovery mode. on recovery mode, there is only a triangle with a red exclamation mark.
I download a stock ROM so I can flash it to my phone from download mode, but at the beginning of flashing process it comes with this error
12 RU_ZIP_ERROR
please help me

sjmahmoudi said:
HTC One M9
Android 6
Bootloader Locked
S=On
USB debugging disable
today I found my phone stock on decryption screen! I did not enable encryption mode. now my phone says: your phone is encrypted. to decrypt your phone, enter your Screen lock password.
it does not matter what number I enter! every number I enter, it says: Decryption unsuccessful. the password you entered is correct, but unfortunately, your data is corrupt. to resume using your phone, you need to perform a factory reset. When you set up your phone after the reset, you'll have an opportunity to restore any data that was backed up to your Google Account.
But nothing happened when I press the "reset phone" button. I waited 4 hours but it remains on a window named "Factory data reset, Rebooting..." but it can not proceed to reboot.
when I power off and go to bootloader, I can not go to recovery mode. on recovery mode, there is only a triangle with a red exclamation mark.
I download a stock ROM so I can flash it to my phone from download mode, but at the beginning of flashing process it comes with this error
12 RU_ZIP_ERROR
please help me
Click to expand...
Click to collapse
This problem has been posted from time to time by other users - it often indicates a corrupt chip in the motherboard.
Depending on your SKU and whether or not there really is a hardware issue or not, it may be possible to apply a RUU, which would effectively restore your phone to factory state (though it will wipe your internal memory).
Please post your OS version, which will help us determine your phone's SKU.

If you put the phone in download mode and plug it into a pc then run fastboot.exe with the cli command 'fastboot getvar all' you will get a lot of important information.
If you are absolutely sure your phone has never been modified and it shows on the fastboot output "status modified" then you can assume your phone has hardbricked from a faulty nand. Only HTC can fix it in the case.
Beamed in by telepathy.

computerslayer said:
this problem has been posted from time to time by other users - it often indicates a corrupt chip in the motherboard.
Depending on your sku and whether or not there really is a hardware issue or not, it may be possible to apply a ruu, which would effectively restore your phone to factory state (though it will wipe your internal memory).
Please post your os version, which will help us determine your phone's sku.
Click to expand...
Click to collapse
os: 3.35.401.32

shivadow said:
If you put the phone in download mode and plug it into a pc then run fastboot.exe with the cli command 'fastboot getvar all' you will get a lot of important information.
If you are absolutely sure your phone has never been modified and it shows on the fastboot output "status modified" then you can assume your phone has hardbricked from a faulty nand. Only HTC can fix it in the case.
Beamed in by telepathy.
Click to expand...
Click to collapse
I rooted this phone when I first bought it. but 4 months ago I unroot it so I could update it's android to marshmallow. after unrooting, i receive the android update and everything was as normal as a fresh unrooted phone.
I was able to go to download mode when first my phone faced this problem. but now the download mode is not available
it says: failed to boot to download mode
press volume up or down to back to menu
this build is for
development purposes only
do not distribute outside of HTC
without HTC's written permission.
Failure to comply may
lead to legal action.

computerslayer said:
This problem has been posted from time to time by other users - it often indicates a corrupt chip in the motherboard.
Depending on your SKU and whether or not there really is a hardware issue or not, it may be possible to apply an RUU, which would effectively restore your phone to factory state (though it will wipe your internal memory).
Please post your OS version, which will help us determine your phone's SKU.
Click to expand...
Click to collapse
I took my m9 to HTC service center. he said that main chip must be replaced. after replacing the chip, he said that I need a dump.bin file and I do not have it. now after 3 months, my dear m9 is still on the service center . I search all over the net for the dump.bin file but there is nothing at all.
I do not even know what the hell is the dump.bin file. he said that your phone can boot but it will not have antenna without relevant dump file. I'm confused please help me
my phone model ID: 0PJA100

Did you give your phone to an official HTC service center? HTC should have the needed file so the fact that you should provide it to the service center confuses me a bit.
It's impossible to get that file (from a working phone) without a JTAG device and I doubt that many M9 owners have one since they're quite expensive. Sorry for the bad news.