Nokia Recovery Mode:
1. Turn off your device
2. Press Volume + and Power Button 15 seconds
BootLoader Mode:
1. Turn off your device
2. Remove wires and battery
3. Hold on Volume + Key while you connect USB
4. Device should be detected as Qualcomm CDMA Technologies MSM
At least Nokia recovery, allow us to do & restore weird backups.
Keep going folks and dont forget to hit Thanks button :victory:
For Android ADB type *#*#2273#*#*
Use Google WinUSB drivers.
pete_es said:
For Android ADB type *#*#2273#*#*
Use Google WinUSB drivers.
Click to expand...
Click to collapse
Thanks for the advice, i already read u a few days ago.
Thanks!
Well done guys, keep it going. I'm looking forward to the day we can have 4.4 on this one.
guys can you post all nokia x dial codes?
I use a costum rom "jellybean",cant enter to recovery
Kashamalaga said:
Nokia Recovery Mode:
1. Turn off your device
2. Press Volume + and Power Button 15 seconds
BootLoader Mode:
1. Turn off your device
2. Remove wires and battery
3. Hold on Volume + Key while you connect USB
4. Device should be detected as Qualcomm CDMA Technologies MSM
At least Nokia recovery, allow us to do & restore weird backups.
Keep going folks and dont forget to hit Thanks button :victory:
Click to expand...
Click to collapse
my pc dosent recognise my phone with costum rom and i cant enter to recovery mode
recovery mode not working
:crying::crying::crying:
but my nokia x is stucking on the nokia logo it's not getting into recovery mode ?
Found Solution/Workaround!
david sahithya said:
:crying::crying::crying:
but my nokia x is stucking on the nokia logo it's not getting into recovery mode ?
Click to expand...
Click to collapse
Guys i think i found a way to boot into recovery atleast!
use the same nokia X tools and try to flash "gapps", follow all the instructions to do so!
and then along the procedure it will try to boot into cwm recovery n finds that there is no recovery at all! and then "downloading boot.img comes up and it installs cwm recovery and boots into it ! voila!
this thread must be post as sticky cause this helps
Sir Nokia x mobile phone only connected emergency mode how to flash plz help
---------- Post added at 06:15 PM ---------- Previous post was at 05:52 PM ----------
pete_es said:
For Android ADB type *#*#2273#*#*
Use Google WinUSB drivers.
Click to expand...
Click to collapse
Hai sir I need one help I am used Nokia x phone and my phone is only pc connected in emergency contivity plz help sir
Hi guys plz tell I have flashed wrong Rom and stuck in Nokia x logo and unable to get enter into recovery mode
Hy guys i have a G E-975 with korean kit kat from leaked F180K unlocked with freegee and framaroot my phone works perfect boots to recovery normal open and close the same normal my problem is that it doesn't boot to download mode for no reason i installed all the drivers i read all the articles of xda tried many times unistall and reinstall try different computer exactly the same normal boot normal recovery no download mode......please help i want to downgrade to the official but if i can't i will stay to custom for ever.....
soniccm said:
Hy guys i have a G E-975 with korean kit kat from leaked F180K unlocked with freegee and framaroot my phone works perfect boots to recovery normal open and close the same normal my problem is that it doesn't boot to download mode for no reason i installed all the drivers i read all the articles of xda tried many times unistall and reinstall try different computer exactly the same normal boot normal recovery no download mode......please help i want to downgrade to the official but if i can't i will stay to custom for ever.....
Click to expand...
Click to collapse
Stupid question, but are you sure you are doing it right? To enter download mode, first turn the phone off. Then hold both volume buttons, and plug in the USB cable to your computer. Do NOT press the power button. Is this what you are doing?
Also, are you saying you rooted an F180 KitKat with Framaroot?!?! I find that very hard to believe, as it failed for me, and other people also confirmed that it didn't work...
kt-Froggy said:
Stupid question, but are you sure you are doing it right? To enter download mode, first turn the phone off. Then hold both volume buttons, and plug in the USB cable to your computer. Do NOT press the power button. Is this what you are doing?
Also, are you saying you rooted an F180 KitKat with Framaroot?!?! I find that very hard to believe, as it failed for me, and other people also confirmed that it didn't work...
Click to expand...
Click to collapse
sorry dude if i was sure that i made ir right that would be a problem... I have try both with power and volumes +,- and without power deeply black screen nothing more less. My lg is not an F180 is an E975 rooted and cwm recovery with leaked kit kat from the korean F180 i wrote it in first post
Anybody knows how to boot my E 975 into download mode????
any solution i tried from internet didn't work...please help
today tried and hard reset it nothing happens only 2 sort vibrates and nothing more is a protection of the phone or i bricked it any help???
anybody????
The same thing happened to me .. The phone didn't show DOWNLOAD MODE. ... i still flashed the stock kdz by these steps
1.. switch off ur phone
2.. keep the up and down volume buttons pressed and insert the usb cable
3.. open Kdz updater ..
4 .. click read phone information. .and wait for a minute
5.. if it even shows a slight progress seen in the green bar , then you have a go..
Notes
:1.. if the kdz updater even hangs and stops responding while reading ur phone info.. and takes some time.. ur phone is connected in download mode even it shows the slightest progress in the progress bar ( green coloured)
2... if u cant switch off ur phone due to frequent restarts. . just keep the cable connected and the volume buttons pressed while it is restarting
[you can also see ur computer's device mgr for ur phone connection ]
then just flash the Kdz as you do..
I HAVE DONE IT MYSELF several times when my phone didn't show Download mode on the screen.. but cannot guarantee it'll work for you too.. I I'd recommend you to give it a try as it always worked fir me..
BEST IF LUCK
MasterFURQAN said:
The same thing happened to me .. The phone didn't show DOWNLOAD MODE. ... i still flashed the stock kdz by these steps
1.. switch off ur phone
2.. keep the up and down volume buttons pressed and insert the usb cable
3.. open Kdz updater ..
4 .. click read phone information. .and wait for a minute
5.. if it even shows a slight progress seen in the green bar , then you have a go..
Notes
:1.. if the kdz updater even hangs and stops responding while reading ur phone info.. and takes some time.. ur phone is connected in download mode even it shows the slightest progress in the progress bar ( green coloured)
2... if u cant switch off ur phone due to frequent restarts. . just keep the cable connected and the volume buttons pressed while it is restarting
[you can also see ur computer's device mgr for ur phone connection ]
then just flash the Kdz as you do..
I HAVE DONE IT MYSELF several times when my phone didn't show Download mode on the screen.. but cannot guarantee it'll work for you too.. I I'd recommend you to give it a try as it always worked fir me..
BEST IF LUCK
Click to expand...
Click to collapse
please tell me how u flash kdz my which method on which operating system bcoz ican enter into download mode but never got success in flashing kdz please elaborate whole procedure for me i am from india
I already elaborated. . jjust. follow the steps.. i also have the e975 indian..
just reply if you have problems with any steps
---------- Post added at 08:14 AM ---------- Previous post was at 08:10 AM ----------
worldone98 said:
please tell me how u flash kdz my which method on which operating system bcoz ican enter into download mode but never got success in flashing kdz please elaborate whole procedure for me i am from india
Click to expand...
Click to collapse
i have flashed it on Win 7 x86 and win 8.1 pro x64
---------- Post added at 08:19 AM ---------- Previous post was at 08:14 AM ----------
worldone98 said:
please tell me how u flash kdz my which method on which operating system bcoz ican enter into download mode but never got success in flashing kdz please elaborate whole procedure for me i am from india
Click to expand...
Click to collapse
follow these steps.. :if you have less than 1 gb kdz file
1) Download the latest KDZ from LG's server for your phone via
the app below (kudos to the creator)
http://www.mediafire.com/?cgeb6o5osy2yl9c
2) Make sure you have LG United Drivers already installed,
otherwise download from below
http://www.mediafire.com/?82nt1aeh04aqa3m
3) Download LG KDZ Updater
http://www.mediafire.com/?sj5y073xal03ntw
4) Download the manual adb wipe batch file
http://www.mediafire.com/?ru7erfxsz7p7s3p
5) Put your Optimus G into Download Mode by switching it off,
attaching the usb cable to the phone, holding both the up and
down volume buttons at the same time and lastly inserting the
usb cable into the computer; wait for the drivers to finish
loading if doing it for the first time.
6) Unzip the downloaded updater zip file and run KDZ_FW_
UPD.exe. Use the settings below
Type: 3GQCT
Phone Mode: CS_Emergency
KDZ file: navigate to the folder which you have saved the
downloaded KDZ from the step (1)
Click Launch Software Update and wait for the flash process to
finish
7) Your phone will restart itself when IParam = 90 is displayed
and proceed slower until you see IParam=1 again (which
signals the end of flash, you can safely exit the program then
and remove the cable from the phone). If phone boots up
normally, congrats, skip the steps below and proceed to use the
phone as per normal.
However, this most probably will not be the case for newer
Optimus-es, as the data partition somehow wasn't wiped even
when KDZ-ed, remaining 'dirty', thus causing bootloop or
security infringement.
8) If the phone is stuck at the booting up LG/Telco logo, you
will need to manually wipe the data partition.
9) Force the phone off by holding the power button for appx
15secs.
10) Put the phone into recovery mode by holding the volume up
and home button concurrently, then press the power button. Let
go of all the buttons after you see the LG logo on screen for the
2nd time and the screen goes blank thereafter (backlight may
still be on). The phone will kind of reboot and then enters
recovery mode. Repeat the process if you did not get it the first
time.
11) With the phone in Recovery Mode, connect it to the
computer, wait for the drivers to load (if doing it for the first
time), unzip the wipe batch file downloaded earlier from step (4)
, double click on wipe.bat to execute the wipe command.
12) Your phone will auto reboot when wiped and (hopefully)
boot as per normal.
Hope with this simple guide fellow members will feel safer when
rooting or removing non essential LG wares from their Optimus
---------- Post added at 08:24 AM ---------- Previous post was at 08:19 AM ----------
worldone98 said:
please tell me how u flash kdz my which method on which operating system bcoz ican enter into download mode but never got success in flashing kdz please elaborate whole procedure for me i am from india
Click to expand...
Click to collapse
if you have greater thsn 1 gb kdz file
REQUIREMENTS:
MUST HAVE LG DRIVERS
MSXML
.NET FRAMEWORK INSTALLED
1.DOWNLOAD THE ROM/KDZ
2.DOWNLOAD LATEST LG MOBILE SUPPORT TOOL
http://csmg.lgmobile.com:9002/client...2CAppSetup.exe
INSTALL IT WHEN DONE. CLOSE AND END PROCESS ON
TASKMANGER.
3.DOWNLOAD LG R&D TOOL
http://storagecow.eu/index.php?dir=X.../Programs/
4.GO TO DOWNLOAD MODE POW+BOTH VOL BUTTON
PRESSED+CONNECT USB
6) Extract FlashTool and run UpTestEX.exe
7) In R&D Test Tool window,
Select Type = 3GQCT (top left hand side)
PhoneMode = DIAG (top right hand side)
Select kdz file = click to select your LG stock rom *.kdz
Click "Normal web upgrade test" (bottom right hand side)
Then another window will pop up, click "Upgrade Start" button
wait a few seconds, another window "Select Country &
Language" pop up,
=> Country=Republic of Korea
=> Language=English
you can click ok to proceed
8) All Done and wait for finish!
---------- Post added at 08:34 AM ---------- Previous post was at 08:24 AM ----------
worldone98 said:
please tell me how u flash kdz my which method on which operating system bcoz ican enter into download mode but never got success in flashing kdz please elaborate whole procedure for me i am from india
Click to expand...
Click to collapse
IMPIRTANT NOTE: DO NOT USE USB 3.0 PORT FOR THIS.. use only usb 2.0 port with a good usb cable as provided with the phone
when i hit update button the app crash for both solutions....
I don't understand my phone works fine but i can't boot to download mode or recovery from the start (with button press) i can boot recovery only with rom manager please somebody which is the combinations for LG E975 for download mode and for recovery because i mess my mind with all this models?????
flash other bootloader in recovery! (z30d mako bootloader but look at updater script and when needed, delete first lines with device info ****...)
2nd Sky said:
flash other bootloader in recovery! (z30d mako bootloader but look at updater script and when needed, delete first lines with device info ****...)
Click to expand...
Click to collapse
hey budy i'm a noob i don't understand what should be needed to delete and replace with what and where is this script make it clearer if that is possible (i don't want to brick my G just want to go back to stock)
ps. so easy to go to custom so hard to go back to stock
I was installing mui rom but after install recovery and update to mui rom my lg stuck on logo and error secure boot error ,
And now set is not connecting in download mode this fault was already in mobile ,
Not connecting in download mode but in service mode and mtp and lg software mode usb works ok but no response in download mode
I have kdz file and all requried tool but connectivity problem ,
Not i need solution how can i recover my lg it's on logo now wipe hardreset already done
Also i done full erase and reflash with 512mb dump file with riff box but still on logo and also in charging no image found but charging work fine
Now i need solution for fix connectivity in download mode ,
Or need good dump file file riff box
Or any other solution if available .
may be a drivers problem.you can change a driver
Tried Every Thing bro
,
When it Comes on logo then usb detected and install drivers but in download mode no response ,
also tries with 2 pc and changed many cables .
Can you go to the recovery mode?
Try flashing efs backup.
My problem is Solved thanks of All Friends
Akhtar Ali Jatt said:
My problem is Solved thanks of All Friends
Click to expand...
Click to collapse
bro i have same probelem also please help
---------- Post added at 12:54 PM ---------- Previous post was at 12:48 PM ----------
Akhtar Ali Jatt said:
I was installing mui rom but after install recovery and update to mui rom my lg stuck on logo and error secure boot error ,
And now set is not connecting in download mode this fault was already in mobile ,
Not connecting in download mode but in service mode and mtp and lg software mode usb works ok but no response in download mode
I have kdz file and all requried tool but connectivity problem ,
Not i need solution how can i recover my lg it's on logo now wipe hardreset already done
Also i done full erase and reflash with 512mb dump file with riff box but still on logo and also in charging no image found but charging work fine
Now i need solution for fix connectivity in download mode ,
Or need good dump file file riff box
Or any other solution if available .
Click to expand...
Click to collapse
I have L.G F180L in same type of condition. how can i recover my phone in working state plz help
ghr143 said:
bro i have same probelem also please help
---------- Post added at 12:54 PM ---------- Previous post was at 12:48 PM ----------
I have L.G F180L in same type of condition. how can i recover my phone in working state plz help
Click to expand...
Click to collapse
i Had Done With 2 Tricks First leave Phone Without Battery For 2 Days Then Connect Battery And Don't press power button go directly in download mode by pressing volume up & Down And Insert Usb cable ,
Second Method is That Frequently Insert And Remove usb cable it Will Detect In Device manager But you should not remove usb cable when it detect so open device manager and watch carefully and insert and Remove usb cable,
Good Luck
I recently tried to flash a .kdz file on my g pro (e988) ,accidentally i removed my phone from pc while it was in download mode then removed battery also,so after that i reconnected to pc but no download mode no recovery mode,no fastboot no adb,no LG logo atleast,soft buttons led lights for 2-3 seconds and off.
https://www.youtube.com/watch?v=Np9LRCN2Hrg
Download mode press volume up+down together than plug usb. Use CSE flash on LG Flash Tool.
wesly.btm said:
Download mode press volume up+down together than plug usb. Use CSE flash on LG Flash Tool.
Click to expand...
Click to collapse
i do it but i have nothing and when i connect my phone to pc my device manger show my phone qhsusb_dload
Have you installed all driver?
wesly.btm said:
Have you installed all driver?
Click to expand...
Click to collapse
yes i did bro
try this link it may works. http://tech2mech.com/how-to-flash-kdz-lg-f240-f180-f160-lg-g-pro/
i try this method my problems Fix.
wesly.btm said:
try this link it may works. http://tech2mech.com/how-to-flash-kdz-lg-f240-f180-f160-lg-g-pro/
i try this method my problems Fix.
Click to expand...
Click to collapse
thanks bro 4 ur help but i true it but it stop in %4 and get error
qhsusb_dload means you´re in qualcomm mode, and also means that you´ve killed phone boot. from what I know, only medusa and riff boxes can fix it.
Hello and sorry for my bad English.
Congratulations for the good forum, it very much helped me with the info ... thanks
Brought me Phone with broken glass Lenovo p1, p1a42, Euro version think. I do not know what they doing with the phone, think it was OTA update issue....
I found many problems in this phone, when it is ON the display works, touch too, but I got Message:Encryption Unsuccessful ... reset does not work, I try in stock recovery remove the wipe,data, there is no success. After that another mode (vol-, power) there again did wipe, nothing again. Phone power on and again got Message: Encryption Unsuccessful ... I know with an Closed-eyes what to do with p780, but P1 is new to me.
Trying to install the new firmware from sdcard as changing his name as Update.zip firmware, but no success ... got error message, I think he did not see the sd card, only internal, But I do not see it too ...cannot put on it update.zip
Another problem is that the PC does not see the phone ... I have 3 pc, 2 win7x64, and 1 xp on it, no one saw the phone, and there is no sound for the new device. I have all the drivers for Qualcom, but the device does not respond. Device manager don't show me phone or new port. So i got power up from Pc or charger, but nothing else. Got logo from Lenovo at start, then almost start to android and again got this Encryption Unsuccessful...bla-bla.
My question: if I have problems with recovery ... can i put on the SD card, like update.zip file and install? Like the old p780? It is possible to get problem from broken main board or chip? Or just i don't get proper drivers? Thanks for help
Have you read through this thread http://forum.xda-developers.com/vibe-p1/development/qpst-flashing-vibeui-3-1-s272-rom-t3386650
Also try a different Usb cable ,the driver I used is the second one mentioned.
sesos said:
Hello and sorry for my bad English.
Congratulations for the good forum, it very much helped me with the info ... thanks
Brought me Phone with broken glass Lenovo p1, p1a42, Euro version think. I do not know what they doing with the phone, think it was OTA update issue....
I found many problems in this phone, when it is ON the display works, touch too, but I got Message:Encryption Unsuccessful ... reset does not work, I try in stock recovery remove the wipe,data, there is no success. After that another mode (vol-, power) there again did wipe, nothing again. Phone power on and again got Message: Encryption Unsuccessful ... I know with an Closed-eyes what to do with p780, but P1 is new to me.
Trying to install the new firmware from sdcard as changing his name as Update.zip firmware, but no success ... got error message, I think he did not see the sd card, only internal, But I do not see it too ...cannot put on it update.zip
Another problem is that the PC does not see the phone ... I have 3 pc, 2 win7x64, and 1 xp on it, no one saw the phone, and there is no sound for the new device. I have all the drivers for Qualcom, but the device does not respond. Device manager don't show me phone or new port. So i got power up from Pc or charger, but nothing else. Got logo from Lenovo at start, then almost start to android and again got this Encryption Unsuccessful...bla-bla.
My question: if I have problems with recovery ... can i put on the SD card, like update.zip file and install? Like the old p780? It is possible to get problem from broken main board or chip? Or just i don't get proper drivers? Thanks for help
Click to expand...
Click to collapse
Shut down the phone and press volume up and until it connect to the pc
Hi, merry Christmas jAww, just 2 answers... I know how to update drivers and reinstall android roms... For now, nothing helped. No luck with many cable, pc, drivers. No luck with 15 sec vol + , Nothing with Test mode in Windows 7 , phone is not recognize, just when i plug in, got vibration and battery stats % charges.
Trying some update.zip from stock recovery , nothing... fail at 24% or best was 49% and loop at this percents. Why i cant go further? Some is blocked or ... ?
When i go to recovery VOL - there is SD UPDATE, but when i try from there to update, got this message "dev: external sdcard data encypted" If im not wrong , this is internal sd storage, not external , right? This message is show some problem in phone or is normal alert? Maybe soon i will send it to some shop service... Thanks.
sesos said:
Hi, merry Christmas jAww, just 2 answers... I know how to update drivers and reinstall android roms... For now, nothing helped. No luck with many cable, pc, drivers. No luck with 15 sec vol + , Nothing with Test mode in Windows 7 , phone is not recognize, just when i plug in, got vibration and battery stats % charges.
Trying some update.zip from stock recovery , nothing... fail at 24% or best was 49% and loop at this percents. Why i cant go further? Some is blocked or ... ?
When i go to recovery VOL - there is SD UPDATE, but when i try from there to update, got this message "dev: external sdcard data encypted" If im not wrong , this is internal sd storage, not external , right? This message is show some problem in phone or is normal alert? Maybe soon i will send it to some shop service... Thanks.
Click to expand...
Click to collapse
if u connect to the pc do u see something in device manager?
No, already writing issue. Not recognizing, no com port, nothing beep for new device in device.
Starchm said:
if u connect to the pc do u see something in device manager?
Click to expand...
Click to collapse
I have almost same problem
Difference is I can connect to Pc but device manager says Qualcomm HS-USB Diagnostics 9006
when I try to run QFIL
QFIL says "Failed to Switch to Emergency Download mode"
Any suggestions?
erdemdengel said:
I have almost same problem
Difference is I can connect to Pc but device manager says Qualcomm HS-USB Diagnostics 9006
when I try to run QFIL
QFIL says "Failed to Switch to Emergency Download mode"
Any suggestions?
Click to expand...
Click to collapse
Get mini partition wizard and connect to the pc then delete all partition from device
Starchm said:
Get mini partition wizard and connect to the pc then delete all partition from device
Click to expand...
Click to collapse
Yes I did
I still get Qualcomm HS-USB Diagnostics 9006
Should I create a new partition?
---------- Post added at 08:18 PM ---------- Previous post was at 08:10 PM ----------
Upsss now phone is completely gone
No response
erdemdengel said:
Yes I did
I still get Qualcomm HS-USB Diagnostics 9006
Should I create a new partition?
---------- Post added at 08:18 PM ---------- Previous post was at 08:10 PM ----------
Upsss now phone is completely gone
No response
Click to expand...
Click to collapse
Yes u need
---------- Post added at 09:26 PM ---------- Previous post was at 09:18 PM ----------
erdemdengel said:
Yes I did
I still get Qualcomm HS-USB Diagnostics 9006
Should I create a new partition?
---------- Post added at 08:18 PM ---------- Previous post was at 08:10 PM ----------
Upsss now phone is completely gone
No response
Click to expand...
Click to collapse
Yes u need as primary , ext4 and dont give NAME
Starchm said:
Yes u need
---------- Post added at 09:26 PM ---------- Previous post was at 09:18 PM ----------
Yes u need as primary , ext4 and dont give NAME
Click to expand...
Click to collapse
After deletion I lost my phone
device manager says unknown device
erdemdengel said:
After deletion I lost my phone
device manager says unknown device
Click to expand...
Click to collapse
Anything? blue light or smt?
Starchm said:
Yes u need
---------- Post added at 09:26 PM ---------- Previous post was at 09:18 PM ----------
Yes u need as primary , ext4 and dont give NAME
Click to expand...
Click to collapse
MiniTool Partition Wizard cant see my phone anymore
---------- Post added at 08:42 PM ---------- Previous post was at 08:41 PM ----------
Starchm said:
Anything? blue light or smt?
Click to expand...
Click to collapse
Nothing, I pressed power button ~30 sec then device manager says Care Suite Emergency Connectivity
erdemdengel said:
MiniTool Partition Wizard cant see my phone anymore
---------- Post added at 08:42 PM ---------- Previous post was at 08:41 PM ----------
Nothing, I pressed power button ~30 sec then device manager says Care Suite Emergency Connectivity
Click to expand...
Click to collapse
U can try to reinstall your qualcomm drivers.
Starchm said:
U can try to reinstall your qualcomm drivers.
Click to expand...
Click to collapse
Installed but no blue light
no vibrate
how can I connect to pc?
erdemdengel said:
Installed but no blue light
no vibrate
how can I connect to pc?
Click to expand...
Click to collapse
try to press 3 button for 20 sec and after that, then press again for 20 sec and then volume up and then connect, i dont remember it good sorry
Got some update for my problem...still not solved. After new clean wind0ws installation , already my phone is recognize from pc. qualcomm 9008 .
Got some problem for MTP USB recognizing, but sometime is correct. So here is what i got like problems:
When power on, still got "encryption unsuccessful" reset not working, Wipe data , cashe, system, not working, no results after delete all of them. After restart still "encryption unsuccessful"
Got power when charging battery from adapter, and from PC... its ok . Already when im plug in cable to PC in phone got choices to prefer from 3 options: charging only, media devices MTP or Camera. Got choise to USB debugging. Several times try to install many roms, without success, In S152_160126_ROW with QFIL, always got error at 85% with this error : Download Fail:FireHose Fail FireHose Fail . Blue bar not showing, dont know if this is issue...Think my boot-loader is not open. I try to open it, but got error from cmd command. Have Question: If my emmc storage is fried, how to test it? With Lenovo assistant show only 250mb or something like that. Dont see 32gb. Trying to flash "Advanced flash unlocked bootloader & recovery" from M0b theme, but still got error Download Fail:FireHose Fail FireHose Fail. Tonight again will read and testing...
sesos said:
Got some update for my problem...still not solved. After new clean wind0ws installation , already my phone is recognize from pc. qualcomm 9008 .
Got some problem for MTP USB recognizing, but sometime is correct. So here is what i got like problems:
When power on, still got "encryption unsuccessful" reset not working, Wipe data , cashe, system, not working, no results after delete all of them. After restart still "encryption unsuccessful"
Got power when charging battery from adapter, and from PC... its ok . Already when im plug in cable to PC in phone got choices to prefer from 3 options: charging only, media devices MTP or Camera. Got choise to USB debugging. Several times try to install many roms, without success, In S152_160126_ROW with QFIL, always got error at 85% with this error : Download Fail:FireHose Fail FireHose Fail . Blue bar not showing, dont know if this is issue...Think my boot-loader is not open. I try to open it, but got error from cmd command. Have Question: If my emmc storage is fried, how to test it? With Lenovo assistant show only 250mb or something like that. Dont see 32gb. Trying to flash "Advanced flash unlocked bootloader & recovery" from M0b theme, but still got error Download Fail:FireHose Fail FireHose Fail. Tonight again will read and testing...
Click to expand...
Click to collapse
Let me ask, 1. you dont enable oem unlock in dev options ?
2. make a photo from device manager if your phone is connected, is it 9008 or 9006?
Hi, 1. I'm cannot go further when i'm in encryption unsuccessful" Just stuck there. cannot log in to normal android screen and settings.
2. phone is recognized like 9008. tonight i will put some pics.
This is sshots from my p1. Already think my internal storage is damaged...hope I'm wrong. Will try with another flash utility, but don't know for results. Why I got this msg from Qfil program. Download fail,HOSEfail,fail...Anyone know why?