Hello mates, Here is
D5503_Customized IN_1281-0184_14.6.A.1.236_R3D Prerooted Flashable Zip for Sony Xperia Z1 Compact Locked Bootloader
Made by PRFCreator_v1.3
You need only rooted phone and TWRP
For Root Xperia Z1C : https://forum.xda-developers.com/xperia-z1/general/root-xperia-z1-lollipop-5-1-1-build-14-t3246373
Or you can any well known and safe method for rooting. I have use kingroot 4.5.2.apk, after root I installed Z1C-lockeddualrecovery2.8.26.
For Dual Recovery : https://forum.xda-developers.com/showthread.php?t=2647480
In this creation you will get Stock Sony Rom 5.1.1.{ rooted with SuperSu (2.46) and Z1C-lockeddualrecovery2.8.26 }
How to Install:
1. Download file
2. Copy this zip in your sd card or internal memory( In recovery you can change default storage )
3. Boot to recovery (Use TWRP)
4. Wipe data,Cache and Dalwik Cache
5. install flashable-prerooted-signed.zip
6. Reboot to System
I have flashed on Stock Sony 14.6.A.1.236 in my Xperia Z1 Compact and tested everything is working good. There isn’t any problem in this rom. After installation this rom we can remove System apps, Ringtones etc… which are we don’t use.
In this rom I didn’t added Xposed. So you can install later.I have installed xposed-v84-sdk22-arm after flash rom.
Download Link : https://drive.google.com/open?id=0B2DnyFUiK93lZW1ncXlLd19JSDg
MD5: 3137f4b552a991d8cb8936749b772528
Download Link for Prerooted Zip with Xposed and SU 2.79 : https://1drv.ms/u/s!AqRWEkw4JbcJhBZESlNAZ2S-H0gJ
MD5: a36e3db078d8f8c0b0cca46f675f3259
how to install
How to install including md5?
jmcatamora said:
How to install including md5?
Click to expand...
Click to collapse
How to Install:
1. Download file
2. Copy this zip in your sd card or internal memory( In recovery you can change default storage )
3. Boot to recovery (Use TWRP)
4. Wipe data,Cache and Dalwik Cache
5. install flashable-prerooted-signed.zip
6. Reboot to System
There is no need to including md5, it is for checking purpose is your downloaded file is corrupted or not.
thank you
Can you help me . How to install xpose .??plz show me the download file xposed-v84-sdk22-arm and the framework.
jmcatamora said:
Can you help me . How to install xpose .??plz show me the download file xposed-v84-sdk22-arm and the framework.
Click to expand...
Click to collapse
Thanks to rovo89 for xposed support .
This is the link for download xposed framework
http://dl-xda.xposed.info/framework/sdk22/arm/
Detailed instructions for installation go to this link
https://forum.xda-developers.com/showthread.php?t=3034811
Thanks a ton for this! Worked awesome!
Since I went from stock 5.0.2 -> 5.1.1 ... I tried not wiping data and it seems everything still works fine! My apps, settings and data are all there =) ... so far w/o bugs.
I installed cyberian 7.1 camera(primary reason for my attempt at the upgrade) ... and seems to be working 100% w/o issue =)
GenTarkin said:
Thanks a ton for this! Worked awesome!
Since I went from stock 5.0.2 -> 5.1.1 ... I tried not wiping data and it seems everything still works fine! My apps, settings and data are all there =) ... so far w/o bugs.
I installed cyberian 7.1 camera(primary reason for my attempt at the upgrade) ... and seems to be working 100% w/o issue =)
Click to expand...
Click to collapse
Happy to know it is working on without wiping data.
PARESH AHAR said:
Happy to know it is working on without wiping data.
Click to expand...
Click to collapse
An update, its still working amazingly bug free!!! (w/o data wipe)
Also, *I think* battery life has much improved ... but that may be because I wiped cache and also turned off Stamina mode after reading it sucks battery life rather than help it lol!
I did run into some battery level quirkiness within the first few days of install, but hoping it was just some learning curve the OS had to do w/ battery ... time will tell =)
I do have a question tho, just noticed you state the bootloader/recovery is "locked"? Does this overwrite my previous "unlocked" state and its relocked now? Or does an unlocked state persist? Thanks
GenTarkin said:
I do have a question tho, just noticed you state the bootloader/recovery is "locked"? Does this overwrite my previous "unlocked" state and its relocked now? Or does an unlocked state persist? Thanks
Click to expand...
Click to collapse
No,this doesn't overwrite your unlocked bootloader. your unlocked state is persist.You can check by dialing *#*#7378423#*#* /Service info/Configuration/Rooting status:
Sad update, seems my phone has fallen victim to the "LP upgrade & damaged battery" coincidence =( ... I know its not a fault of ur ROM. Phone works fine from 100% to 50% then a 50% it rapidly drops to 1% and shuts off =/
That being said, ordered a replacement battery kit + back door + NFC tag. Hopefully normal battery functionality will be restored after its replaced =)
Seems to be a widespread problem =/ Its weird because I had LP 5.0.2 on it previously.
Battery replacement went well, back to full expected usage time!
blank screen after sony logo what should i do i have an unlock bootloader TWRP 3.0.2 on FotaKernel
nhicko95 said:
blank screen after sony logo what should i do i have an unlock bootloader TWRP 3.0.2 on FotaKernel
Click to expand...
Click to collapse
Bro I have tried locked bootloader. But I think GenTarkin installed on unlocked bootloader successful. First you should flash stock.ftf and after go further as first post.
Dirty flash I love you dirty flash blahblahblah
Thanks for this, just what I needed without the hasle as Gen said I just flashed over the rom I was using (mx 8.5), wiped dalvik and that other thing but kept data and now my phones overheating has stopped, installed xposed and my tweaks reinstalled themselves... Because of the dirty flash some of the apps needed updating but apart from that its ask good... Nice one
Update Zip
Zip is updated with Xposed and SU 2.79
Download Link : https://1drv.ms/u/s!AqRWEkw4JbcJhBZESlNAZ2S-H0gJ
Is there an Arabic language?
azoga said:
Is there an Arabic language?
Click to expand...
Click to collapse
Stock languages
There is a problem with Facebook and Messenger app (normal, not lite versions). When my girlfriend is trying to run these apps the screen just is just blinking (black&white) every 0,5 of sec. and nothing else is happening. Reinstalling those apps does not solve the problem.
watchoutbehindyou said:
There is a problem with Facebook and Messenger app (normal, not lite versions). When my girlfriend is trying to run these apps the screen just is just blinking (black&white) every 0,5 of sec. and nothing else is happening. Reinstalling those apps does not solve the problem.
Click to expand...
Click to collapse
You need to install an older version of facebook.
14.3.b.0.310
Can i flash this rom from stock rom 14.3.b.0.310?
Related
here is the MIUI 2.9.28 for Acro S from this site: http://www.miui.com/thread-738033-1-1.html
ROM is fine,it had SD Card Mounter v2.01 for Acro S inside ROM is multilingual
ROM is for locked/unlocked bootloader
changelog: http://miuiandroid.com/community/threads/miui-rom-2-9-28-changelog.18280/
Download MIUI 2.9.28 LT26w: http://www.mediafire.com/?ccd70j4qj836hb0 :good:
Google Apps: http://goo.im/devs/miui/gapps/MIUI.us_gapps_120724_Signed.zip
INSTALL:
-put ROM file into SD card / internal card
-flash CWM recovery (if you don`t have)
-do a full wipe data/cache/dalvik
-install zip from SD card
-reboot
so far everything is working fine, battery life is good, 9% after 8 hours sleep/very light use
Nice share mate... Hows the rom so far? Planning to flash this soon..
successfully updated from MIUI 2.9.21 to MIUI 2.9.28. (locked bootloader)
guyderam said:
Nice share mate... Hows the rom so far? Planning to flash this soon..
Click to expand...
Click to collapse
ROM is very good good battery life in standby. But i have one problem with "Permission Manager" eg if some app need root access first time Permission Manager crash, but if i go to Permission Manager and allow that apps to root access (make rule) then everything is OK, that's is annoying only with new app requesting root permission first time, after create rule there is no problem I don`t know if only my have that problem :silly:
veimus said:
ROM is very good good battery life in standby. But i have one problem with "Permission Manager" eg if some app need root access first time Permission Manager crash, but if i go to Permission Manager and allow that apps to root access (make rule) then everything is OK, that's is annoying only with new app requesting root permission first time, after create rule there is no problem I don`t know if only my have that problem :silly:
Click to expand...
Click to collapse
You can try SuperSu instead of the permission manager and it will work ok after that. Ohh and by the way shouldn't this post be moved to Acro thread ?
thanks for tip
P.S. If i don`t create this ROM it`s can`t go to Development section for Acro S, that`s why is here more info you find here: LINK
Flashed this yest. Works fine with locked bootloader.
The only problem is few apps are in chinese.. And even the clock widget has chinese font on it.. Any way to make it fully english?
And i noticed that my free ram is always low... Its always orange... Not much apps running at the background. Any idea?
And how do i flash GAPPS?
I install the zip from CMW but nothing at all..
for full English try select English(UK) language even if is selected in the phone settings and reboot phone.
For me google app works fine
Ok... If i want to flash GAPPS now.... Do i need to wipe data/cache/dalvik?
Sorry but wat are the apps in the GAPPS package?
How do i get Google Now on miui?
How do I install cwm on locked bootloader?
Sent from my LT26w using xda premium
good work
guyderam said:
Ok... If i want to flash GAPPS now.... Do i need to wipe data/cache/dalvik?
Sorry but wat are the apps in the GAPPS package?
How do i get Google Now on miui?
Click to expand...
Click to collapse
no need to wipe data/cache/dalvik, Inside GAPPS is Google Search, Googla Play Store, Gmail, Google Talk, not sure about Google Maps ( available in Google Play Store)
Where you store GAPPS.zip file? in internal SD or external ? Some of CWM Recovery showing only internal SD
jayman1986 said:
How do I install cwm on locked bootloader?
Sent from my LT26w using xda premium
Click to expand...
Click to collapse
Try this solution: http://forum.xda-developers.com/showthread.php?t=1858738
How's the ram management on this rom?
Mine always has less than 200mb free.
Good thing is there are rarely any lag.
And how do I replace with the actualy ics keyboard?
This doesn't have the swipe function.
Have you tried the latest Version yet? 2.10.19? Can use with locked bootloader?
cant get into CWM
hi, anyone get this problem with booting into cwm? i installed it with recoverx and got it running twice by rebooting the acro s and tapping the screen several time at the startup. but since then i cant get it running no matter how many times i rebooted the acro s over and over. anyone any idea?
jayman1986 said:
How do I install cwm on locked bootloader?
Sent from my LT26w using xda premium
Click to expand...
Click to collapse
Please how i can install that ?
because i try but not booting
i am currently at CM10 hei1125 ROM Jellybean 4.1.2
does this work on .55 with locked BL ?
how to boot cwm after install the miui ?
can't get cmw by tapping the "sony" logo after flash miui
Thks
Thanks a lot
By far the best forum is 4pda. A big thanks to forum member acbka aka asyan4ik
1. Eloquent
2. Phandroid
3. HTC Mania
4. Droid Sans
5. Android Hilfe
6. Frandroid
7. 4pda.ru MATE
Shendu and also for the P6
MIUI
LEWA OS
News
Unlock Codes
uppon2 said:
By far the best forum is Eloquent. Keep an eye on these 2 users 'fte9k' and 'kangvip' - I did try one of the roms out but it was all Chinese. I kept getting a constant system force close at the startup procedure sent in to bootloop. Be very careful when trying the non english roms! I do not want to hear anybody blaming me for a bricked phone.
1. Eloquent
2. Phandroid
3. HTC Mania
4. Droid Sans
5. Android Hilfe
6. Frandroid
7. MIUI
8. Unlock Codes
9. News
Click to expand...
Click to collapse
You can add a Russian forum 4pda.ru MATE
acbka said:
You can add a Russian forum 4pda.ru MATE
Click to expand...
Click to collapse
Added
I am about to try LEWA OS. I have always wanted to give this a shot but it was never available on any of my devices. I will report back
*EDIT* Look below for details
uppon2 said:
I am about to try LEWA OS. I have always wanted to give this a shot but it was never available on any of my devices. I will report back
*EDIT* I have changed my mind. I have taken a long time to setup my phone to be the way it is now and don't want to risk having to flash stock firmware again in order to fix a soft bricked phone, not that it usually worries me, it's just annoying trying to get everything perfect again (I don't rely on nandroid backups as even they aren't perfect_
Click to expand...
Click to collapse
you are wrong, backup through twrp 2.6.3.3 works perfectly! Before Recover to do
wipe - advanced wipe
-Wipe dalvik cache
-System
-Cache
-Custom Storage
-Date
restore you buckup -
reboot -
i restore stock b907 / pac man rom / my port fly ui (cm 10.1 joe.stone)
:good:
acbka said:
you are wrong, backup through twrp 2.6.3.3 works perfectly! Before Recover to do
wipe - advanced wipe
-Wipe dalvik cache
-System
-Cache
-Custom Storage
-Date
restore you buckup -
reboot -
i restore stock b907 / pac man rom / my port fly ui (cm 10.1 joe.stone)
:good:
Click to expand...
Click to collapse
I have been doing this for many years. I have goten to points of soft bricking where recovery is impossible to get in to and where I needed to enter download/bootloader modes. The only way to restore a nandroid is if I have backed it up to my computer beforehand, flashed a firmware in download/bootloader mode then re-root/unlock and flash a recovery again, transfer the nandroid to my device and hope the data has not been corrupted during the process between phone and computer. I have actually needed to do this several times and more than once the nandroid was not restorable.
MIUI V5
http://rom.miui.com/en/download/view/id/359370#top
I ended up flashing LEWA OS. Very fast and everything seems to be working fine for me. GPS is working better for me now than on stock, camera and HDR mode are great, speed is good. Wifi and Data is working flawlessly. Beautiful lockscreen and UI. All of the theming options seem to be working as well (for those familiar with MIUI etc.) The rom has a lot of visual tweaking and you can even kill the current running app by long pressing the back button *note* it does work, you just need to hold it for longer. You can also swipe in between the notifications and the switches tabs anywhere on the screen
The first time I flashed this it would not pass the boot animation. I ended up flashing B907 again and then running the bootloader unlock again (regardless of if I needed to or not) and then flashed the rom again. Step 1. Copy the LEWA rom zip and Gapps to your phone, then reboot in to recovery. 2. In TWRP; do an advanced wipe "cache, dalv, system, data" and then go to install and find the rom and install it. 3. reboot and make sure the rom loads all the way (do not bother setting up google account yet), once this happens reboot in to recovery again by holding power button and selecting reboot>recovery (inside of the rom this option is available), once you are there please install Gapps with TWRP, then reboot and enjoy.
Screenshots
Lockscreen Screenshots
Video showing off the rom (all of these features work on HAM)
uppon2 said:
I ended up flashing LEWA OS. Very fast and everything seems to be working fine for me, the only issue so far is I can not scroll left or right to select lockscreen shortcuts, I can only slide it down to unlock. Camera and HDR mode are great, speed is good. Wifi and Data is working flawlessly. Beautiful lockscreen and UI. All of the theming options seem to be working as well (for those familiar with MIUI etc.)
The first time I flashed this it would not pass the boot animation. I ended up flashing B907 again and then running the bootloader unlock again (regardless of if I needed to or not) and then flashed LEWA rom by extracted the files to a new folder and then running the Flash_All.bat from inside the folder. After the files have finished all I did was reboot and it worked this time.
Click to expand...
Click to collapse
Hi, You can put some screenshots of the ROM??
thanks.
elroysk said:
http://rom.miui.com/en/download/view/id/359370#top
Click to expand...
Click to collapse
Because of P6?
This ROM is 100% compatible with Mate?
I have not tried.
ErSergi said:
Hi, You can put some screenshots of the ROM??
thanks.
Click to expand...
Click to collapse
Here are some screen shots. (The navigation keys are like that by choice, remember I am using the Australian model so I only have 1gb of ram )
Some of the lockscreen which is actually live (I am using the BigBang theme)
elroysk said:
http://rom.miui.com/en/download/view/id/359370#top
Click to expand...
Click to collapse
hasbrone said:
Because of P6?
This ROM is 100% compatible with Mate?
Click to expand...
Click to collapse
If you look in the first post of my thread, you will see that MIUI is already listed but from a different download area and from a different author. If you scroll down you will actually find the file for Ascend Mate. I will tell you now though, the file name is the same as the P6 so I am assuming it is the same or they have used the P6 file and tweaked it. I am going to look at both files and give it a shot at running them today.
This is the file provided under the Huawei Ascend Mate
uppon2 said:
If you look in the first post of my thread, you will see that MIUI is already listed but from a different download area and from a different author. If you scroll down you will actually find the file for Ascend Mate. I will tell you now though, the file name is the same as the P6 so I am assuming it is the same or they have used the P6 file and tweaked it. I am going to look at both files and give it a shot at running them today.
This is the file provided under the Huawei Ascend Mate
Click to expand...
Click to collapse
I already installed this rom and it looks neat..
before you install make sure u replace the boot.img with ascend mates boot.img file. the one in the zip file is for P6.
Hi uppon2 , Hd video playback youtube in this ROM? works?
You can put the link in the forum, where you downloaded this ROM Lewa Os.
thanks!
I downloaded d zip...how to flash it
Sent from my HUAWEI MT1-U06
ErSergi said:
Hi uppon2 , Hd video playback youtube in this ROM? works?
You can put the link in the forum, where you downloaded this ROM Lewa Os.
thanks!
Click to expand...
Click to collapse
HD Playback is working fine for me with Youtube. You can get the file from the first post or follow my instructions below
shaun100689 said:
I downloaded d zip...how to flash it
Sent from my HUAWEI MT1-U06
Click to expand...
Click to collapse
I have already given instructions on how to flash the file and I will post them again.
The first time I flashed this it would not pass the boot animation. I ended up flashing B907 again and then running the bootloader unlock again (regardless of if I needed to or not) and then flashed LEWA rom by extracting the files to a new folder and then running the Flash_All.bat from inside the folder. After the files have finished all I did was reboot and it worked this time. I then installed Gapps after being certain that the rom would load
So is it necessity to unlock boot loader...?
Sent from my HUAWEI MT1-U06
Uppon2 , https://disk.yandex.com/public/?hash=UG0GbIYB6yTozqYOQtxz5U5g0Bf7ymAIfTr3ZqQyjg8=
I downloaded this ROM and no. bat file in order to install ...
as installed?
this link is correct, because I see this. bat file to install??
I think these instructions are not in this rom?????
The first time I flashed this it would not pass the boot animation. I ended up flashing B907 again and then running the bootloader unlock again (regardless of if I needed to or not) and then flashed LEWA rom by extracting the files to a new folder and then running the Flash_All.bat from inside the folder. After the files have finished all I did was reboot and it worked this time. I then installed Gapps after being certain that the rom would load
This was tough to get as LG locked down all known exploits with the ZVI release. It took some hardware hacking to pull a clean unmodified system and kernel. Here is a flashable zip:
http://jacobstoner.com/LS980ZVI.zip
This includes a bootstack with an older bootloader and TWRP 2.8.7.3. The ZVI kernel has been bumped to work with the older bootloader. Otherwise this is completely unmodified and unrooted so if you want root then flash SuperSU after flashing this.
http://download.chainfire.eu/supersu
Thanks for sharing, i am on cyanogenmod 11, can i install it with hybrid bootstack and blestagator's bumped twrp?
It will replace your bootstack and update twrp, but it will work fine.
Thanks, man! I wait for it so long! Because I'm still on ZVG because ZVI was unrootable. So all what I need is just clean flash room in recovery and install supersu app? Without any unlockers? Downloading now, making backups and give a try!
astherion said:
Thanks, man! I wait for it so long! Because I'm still on ZVG because ZVI was unrootable. So all what I need is just clean flash room in recovery and install supersu app? Without any unlockers? Downloading now, making backups and give a try!
Click to expand...
Click to collapse
Yes, just flash in recovery and flash the supersu zip from the link above. You can dirty flash over ZVG, it will overwrite the whole system partition anyway.
Confirmed! If works! Just made clean installation 20 minutes ago & flash supersu.zip through recovery. Superuser works fine. So now I've try restore zvg & flash over it. Because I use lots of exposed modules & dorimanx kernel, titanium backup, lucky patcher, freedom etc. For this sw root is critical... Thanks a lot for latest ZVI + root! Later I link to your thread for peoples from russian 4PDA LG G2 thread. Lots of people will be happy!
ROM working well for me too. Thanks!
Not ever try to flash on installed rom! You'll receive a lots of lags after! Make app backup & flash "clean" install through recovery. I found also 1 issue in recovery: then screen goes off after you turn it on you see only blue-grey-black-white stripes with tiny squares. It happens not always but sometimes.
P.S. Previously I also used bumped 2.8.7.3 TWRP and has no problems. Also I use xposed, so when I flash ZVI on ZVG & restore apps backup has lots of lags like force close systemUI, deleted unworking software etc. So - clean install! After that - restore backup, but only user apps, not system like xposed apps, home g4 launcher, dialer etc.!
Rom
Its working fine ... but i am facing network lock issue...Kindly help
To nomansabir: what means network lock? Simlock? Or you can't switch cdma/lte?
astherion said:
To nomansabir: what means network lock? Simlock? Or you can't switch cdma/lte?
Click to expand...
Click to collapse
Dear i am facing sim lock problem.... Its showing Invalid sim card message...
SIM-unlock
Nomansabir: you need made sim-unlock again.
Download Wirking+Hotspot.zip. You must be rooted 1st. Install adbdinsecure2.00.apk, open it, accept root privileges, use checkbox "enable insecure adb" - exit apk. Connect g2 to pc, open simunlock.exe with admin rights, phone must reboot itself after correct installation. Voila: you phone is now sim-free!!!
P.S. You can delete adbdinsecure.apk after
astherion said:
Nomansabir: you need made sim-unlock again.
Download Wirking+Hotspot.zip. You must be rooted 1st. Install adbdinsecure2.00.apk, open it, accept root privileges, use checkbox "enable insecure adb" - exit apk. Connect g2 to pc, open simunlock.exe with admin rights, phone must reboot itself after correct installation. Voila: you phone is now sim-free!!!
P.S. You can delete adbdinsecure.apk after
Click to expand...
Click to collapse
Thnx astherion .... its working fine now.....
jacob019 said:
This was tough to get as LG locked down all known exploits with the ZVI release. It took some hardware hacking to pull a clean unmodified system and kernel. Here is a flashable zip:
http://jacobstoner.com/LS980ZVI.zip
This includes a bootstack with an older bootloader and TWRP 2.8.7.3. The ZVI kernel has been bumped to work with the older bootloader. Otherwise this is completely unmodified and unrooted so if you want root then flash SuperSU after flashing this.
http://download.chainfire.eu/supersu
Click to expand...
Click to collapse
that's wonderful, @jacob019, thanks for sharing this highly waited zip of the ZVI, as far as i am on cloudy G2 3.3 with my LS980 for a long time and have not experienced the stock firmware after ZVG.
I have two questions in my mind if you could please clear them.
1. Is there any problem in the ZVI like most of the LG updates have not been without bugs or lagging ?
2. Can i flash this zip directly from my already installed TWRP without going back to stock ZVG or ZVE? (I have Cloudy G2 3.3 installed with blastgator's boot stack/baseband) {Cloudy G2 v3.3 is indeed a perfect ROM for my LS980 till now}
Thanks again for the great job you have done
talvigi said:
1. Is there any problem in the ZVI like most of the LG updates have not been without bugs or lagging ?
2. Can i flash this zip directly from my already installed TWRP without going back to stock ZVG or ZVE? (I have Cloudy G2 3.3 installed with blastgator's boot stack/baseband) {Cloudy G2 v3.3 is indeed a perfect ROM for my LS980 till now}
Click to expand...
Click to collapse
1. I've been using it for a couple weeks, seems quite stable but I'm a light user.
2. Yes, you can flash it directly from your already installed TWRP. No need for any other preparation.
jacob019 said:
1. I've been using it for a couple weeks, seems quite stable but I'm a light user.
2. Yes, you can flash it directly from your already installed TWRP. No need for any other preparation.
Click to expand...
Click to collapse
Thanks @jacob019 for your time and again for your great job.
I will try it as soon as the download of the zip file will be completed.
And i also must try the SIM unlock as you mentioned above because i live out of US and am using GSM network not CDMA, so i think to do that i need some preparations.
I hope there are thousands in this line to need ZVI and the SIM unlock. Hail Jacob.
What is the flashing procedure by the way? is it same as we flash custom ROM (wipe system, devlock, cache and data) or just wipe dev lock and cache and flash the zip file
Just reboot to tarp recovery, choose wipe - advanced - check all except "sdcard" - wipe and just flash zip. Also better to flash supersuper.zip if you need root. Reboot - profit!
For me it works flawlessly, slight more battery drain, but solved by dorimanx kernel, xposed & greenify app. I didn't see the even mentioned lags in this Rom. Working for me the same as ZVG & also rootable!
astherion said:
Nomansabir: you need made sim-unlock again.
Download Wirking+Hotspot.zip. You must be rooted 1st. Install adbdinsecure2.00.apk, open it, accept root privileges, use checkbox "enable insecure adb" - exit apk. Connect g2 to pc, open simunlock.exe with admin rights, phone must reboot itself after correct installation. Voila: you phone is now sim-free!!!
P.S. You can delete adbdinsecure.apk after
Click to expand...
Click to collapse
@astherion, Thanks for the SIM Unlock files, by the way rooted is OK but but what is "after correct installation" is it what the software in PC does with the mobile or something else? And developer options have to enabled or otherwise?
Edited: Thank you very much guys specially @jacob019 and @astherion, you guys rock the party. The stock Lollipop is flashed perfectly and SIM Unlock was the most simple step i have every seen in the LG world, But astherion you should have mentioned the USB debugging option as it needs to be enabled before running the simunlock.exe from the PC, and an other thing i can see Hands free activation disturbs after every reboot (i have just rebooted twice and it cameup both times) and battery level also going very fast don't know why but, this can be a major issue which may force some people like me to go back to Cloudy. My battery was at 75% and 4 hours 12 minutes remaining and after i rebooted to recovery and wiped devlock cache and data, still battery says 69 % 3 hours 3 minutes remaining. This is dangerous, the battery graph is showing like a forward slash is on the graph panel, I will attach pics.
Indeed this all made me a fan of you guys,
So I am on ZVH, rooted with TWRP installed. Can I just flash the zip files?
When doing a clean install, are you just totting back to an earlier release(ZVE or G), rooting and installing TWRP and then this zip files?
tekweezle said:
So I am on ZVH, rooted with TWRP installed. Can I just flash the zip files?
When doing a clean install, are you just totting back to an earlier release(ZVE or G), rooting and installing TWRP and then this zip files?
Click to expand...
Click to collapse
Yes, you can just flash the zip file; should be no need to wipe data if you're coming from ZVG. Also there is no need to tot back to an earlier release unless you are already on ZVI because wiping data and installing this zip will produce just as clean of an install.
@talvigi, battery is okay for me; but I'm used to stock. I'm not sure about disabling activation because I'm using it on Sprint. I'm sure you can find info on how to improve both of those issues, but there isn't anything to be done here since this is an unmodified stock rom.
Here is my stock based B207 rom, Simply Google. This is great for those of you who have a hard time getting the Google Apps to work and want some extra mods and features. You must have an unlocked bootloader and TWRP installed. This rom is tested on the M2-803L. Flashing it on other versions (801L, 802L) should work but you're flashing it at your own risk. All Google Apps you can download from the Play Store have been removed from the rom. I also heavily debloated it and removed a lot of Huawei apps. Please don't ask me to add anything in as I want to keep this rom slim. Open up Tablet Manager, hit the settings icon and uncheck Smart Tune-up if Permissions Manager force closes when you open it. Please hit the Thanks button if you like the ROM.
Features & Mods:
-AdAway
-Cust Mods
-Dark M2 Theme
-Deodexed
-GBoard
-Google Play Store, Google Contacts Sync
-Heavily Debloated
-Insecure boot.img
-Marshmallow Boot Animation
-Nova Launcher
-Region Mods
-SuperSU Preinstalled
Instructions:
1. OTA or Dload to B2xx first before flashing. The ROM will not boot if you're still on anything lower than B2xx
2. Download ROM and put it on the phone's internal storage or SDCard
3. Boot into TWRP recovery.
4. Performing a factory reset using TWRP is recommended.
5. Flash the ROM
6. Reboot System
7. Profit!
Bugs:
-You tell me
Simply Google B207:
https://www.androidfilehost.com/?fid=817550096634797575
Many thanks! What a nice surprise. This seems to be the first custom rom for the m8.
Appears that it is for the 802l. Would it also work for the 801l?
At the moment I have 5.1 reverted to stock. BL unlocked.
Demianis said:
Many thanks! What a nice surprise. This seems to be the first custom rom for the m8.
Appears that it is for the 802l. Would it also work for the 801l?
At the moment I have 5.1 reverted to stock. BL unlocked.
Click to expand...
Click to collapse
It should work on both versions provided you update to stock B2xx first. After someone updates to B2xx on their 802L I need them to send me two things.
1) Their cust folder so I can integrate it into the rom.
2) Their system/emui folder. There should be a folder called oversea in there which I need to integrate into the rom.
Sorry, I don't have the b215 yet. There was no update to 6.0 till now and i can't find even a newer version for the 801l then the one attached.
Demianis said:
Sorry, I don't have the b215 yet. There was no update to 6.0 till now and i can't find even a newer version for the 801l then the one attached.
Click to expand...
Click to collapse
The B215 update posted in one of these threads is for the 801L because when I flashed it I had no cellular data option at all.
Just tried to install the b019. But again it's a incompatible version. I guess it's because it's for the m2 803l.
Anyway, thanks for your help. I'll have to wait until until the official update hits my tab.
I tried with hisuite, but i have already the latest version available.
Hi. Thanks for the rom. I have 802l - b006 with unlock bootloader. Can I use your rom without updating to b219? I dont have any ota update that I can installl
Thanks
Sent from my HUAWEI M2-802L using XDA-Developers mobile app
budif said:
Hi. Thanks for the rom. I have 802l - b006 with unlock bootloader. Can I use your rom without updating to b219? I dont have any ota update that I can installl
Thanks
Sent from my HUAWEI M2-802L using XDA-Developers mobile app
Click to expand...
Click to collapse
No, things like wifi won't work unless you upgrade to B211 first. Hold off on flashing until I sort out the root issue. Systemless root causes freezes. I'm working on porting the kernel from the X2 so I can use regular root which will fix the freezing issues.
New build up. Fixed root causes freezing in apps.
Do you know where to get the b011? The b006 is the latest rom that I can find for my m2.
Sent from my HUAWEI M2-802L using XDA-Developers mobile app
budif said:
Do you know where to get the b011? The b006 is the latest rom that I can find for my m2.
Sent from my HUAWEI M2-802L using XDA-Developers mobile app
Click to expand...
Click to collapse
You're gonna have to wait until you get the OTA to B215. Then you can flash this rom.
Installed this last night after updating to B207 from the other thread. Works perfectly, thanks!!
how can i remove 3g above my signal? my data is turned off and it still shows
New update. Fixed Multi-Screen not working. Rebased the rom to the International B207 version. Deodexed and added more mods.
ajsmsg78 said:
New update. Fixed Multi-Screen not working. Rebased the rom to the International B207 version. Deodexed and added more mods.
Click to expand...
Click to collapse
Currently I'm using your rom with xposed included.
Is the update also for this version available?
Lots of thanks for your work!
Demianis said:
Currently I'm using your rom with xposed included.
Is the update also for this version available?
Lots of thanks for your work!
Click to expand...
Click to collapse
I didn't integrate xposed this time because I figured if someone wanted it they can install it separately. You can grab it here:
https://drive.google.com/folderview?id=0B5I_q70mNuR4OWRaejdUdE1fcjA
ajsmsg78 said:
I didn't integrate xposed this time because I figured if someone wanted it they can install it separately. You can grab it here:
https://drive.google.com/folderview?id=0B5I_q70mNuR4OWRaejdUdE1fcjA
Click to expand...
Click to collapse
Ok, many thanks for the links. I will uninstall xposed, then dirty flash and after the first boot install xposed again.
my 801w was detected during installation as 802l. Don't know if this is what's causing the trouble, but after installing via TWRP, coming from some b2xx official ROM, i'm stuck at the Huawei Bootscreen for about 10 minutes now. I know that the first start could take a lot of time, but this seems a bit unusual to me. I'll keep it watching for another 15-20 minutes and see if it boots up fine or is frozen in any way.
[Update] so it was stuck in a loop for sure. I tried flashing a clean b2xx from another thread, which booted fine, and dirty flashing your ROM over, but same behaviour. What actually DID work is flashing the boot.img from stock over your ROM, so keeping the other partitions from Simply Google Installation. At least it's booting up now, showing the proper Android Nougat loading screen. Let's see how it works out...
toxic_garden said:
my 801w was detected during installation as 802l. Don't know if this is what's causing the trouble, but after installing via TWRP, coming from some b2xx official ROM, i'm stuck at the Huawei Bootscreen for about 10 minutes now. I know that the first start could take a lot of time, but this seems a bit unusual to me. I'll keep it watching for another 15-20 minutes and see if it boots up fine or is frozen in any way.
[Update] so it was stuck in a loop for sure. I tried flashing a clean b2xx from another thread, which booted fine, and dirty flashing your ROM over, but same behaviour. What actually DID work is flashing the boot.img from stock over your ROM, so keeping the other partitions from Simply Google Installation. At least it's booting up now, showing the proper Android Nougat loading screen. Let's see how it works out...
Click to expand...
Click to collapse
I need the /cust folder from the 801w so I can add it to the rom so it shows up correctly.
ajsmsg78 said:
I need the /cust folder from the 801w so I can add it to the rom so it shows up correctly.
Click to expand...
Click to collapse
Hello
same for me, i have a W, and i'm stuck on logo menu.
I have backup my tablet in trwp before, can you send me your email ???
Thank you.
(PS: is it complicated to deoxed the huawei rom ?) Ty
translation with Google
[Basic information]
ROM Name: [HRT-Super_Lin] Huawei Mate8 full range EMUI5. 0_B580 Power smooth ROOT Lite
ROM Size: 932M
Adaptation version: Mate8 full range
Test models: Mate8 full series
Author : HRT-Super_Lin
[ROM details]
ROM based on official EMUI5. 0_B580 extract production, global odex merge
Add desktop 5X5 options, desktop long press slide, more settings, desktop layout, select
maintain the official complete style, optimize memory usage SuperSU rights management, For ROOT (Superuser)
To open the system update software, in the system / app / HwOUC. Bak Suffix for the apk
Zipalign optimization, reduce memory partition occupancy, add busybox, to facilitate the use of advanced users
delete address book Huawei customer service, to retain Huawei boot sound official Its weather components and system functional components
club.huawei.com
MT8-EMUI5.0-AL10_B580.zip
Mega Link comes later...
1. first must unlock the phone, and successfully brush into the Chinese TWRP Recovery, to ensure that the computer installed a good phone driver, download the recovery after decompression, the phone open USB debugging connected to the computer, double-click run. Bat start brushing, TWRP Recovery address Of TWRP):
MT8-EMUI5.0_TWRP.rar -> https://pan.baidu.com/s/1qXWrilm
2. Download ZIP format brush package, copied to the memory card, can be an external card can also be a built-in card, you can copy to the root directory, you can also copy to the subdirectory
3. Use the Recovery tool or in the shutdown state long press Volume 'button to enter the recovery interface. 4. After entering Recovery, click Clear Data to clear the data and return to the main interface. 5. Return to the main interface and select Install Brush Pack. The internal storage called: emmc, external storage called sdcard, click on the top of the UP A Level return to a directory) 'click Brush Pack' sliding brush into
6. Card brush is not necessary after the success of double-clear, otherwise it may lead to ROOT failure
ROM built several practical promotional software, if not, please use the re-file manager for unloading
statement: recently found someone steal my ROM to join the promotion without the test release, if found, please machine friends Report, please respect the author of labor results, forbidden based on the ROM for the second package, offenders must study
[ROM] Download
Huawei MATE8 entire network （NXT-AL10）：pan.baidu.com/s/1qXWrilm
Huawei MATE8 Telecom Edition （NXT-CL00）：pan.baidu.com/s/1c1FKBDI
Huawei MATE8 China Unicom （NXT-DL00）：pan.baidu.com/s/1pLRjMBp
Huawei MATE8 mobile version （NXT-TL00）：pan.baidu.com/s/1dFqWs85
hi
this new rom or this kang rom or what?
this for L29 or just for AL10?
i have L29 debranded to AL10 can i flash this rom over kangb577?
some info please about this rom
thanks
I have a L29C432 and am from C432B560 to Kang AL10 B580.
Hen Ry said:
I have a L29C432 and am from C432B560 to Kang AL10 B580.
Click to expand...
Click to collapse
is developer options working with you?
Can u load the link to Google or megalink for both twrp and b580 custom rom?
hamadazh said:
hi
this new rom or this kang rom or what?
this for L29 or just for AL10?
i have L29 debranded to AL10 can i flash this rom over kangb577?
some info please about this rom
thanks
Click to expand...
Click to collapse
I have L09C432B560 then I installed kangB577. I download the rom from the link and flash this rom over kangB577. This rom is similar to stock rom without gapp and with chinese apps. However the rom is rooted. There is no Kang settings in this rom.
https://mega.nz/#!IRc2Gb4Q!8NJyuJ3VC7wJpHM4EzvgYDwM9RJYeIzaOoZLM2nn8n0
Every thing went ok on L29C185 debrnded to DL00
Thanks great work.
Tried to flash this over a marshmallow rom by accident. Its stuck in "Booting Now" is there a way i can fix this? :/
BrownyDroid said:
Tried to flash this over a marshmallow rom by accident. Its stuck in "Booting Now" is there a way i can fix this? :/
Click to expand...
Click to collapse
You need to get into twrp, full wipe and restore or flash your previous rom.
[email protected] said:
You need to get into twrp, full wipe and restore or flash your previous rom.
Click to expand...
Click to collapse
I fixed it!
If anyone tries to flash from 6.0 to 7.0 and it wont boot, do what i did //
Use EMUI Recovery to grab the latest running version and let that install if you can, and then update it to EMUI 5.0 on AL10
Then install TWRP on 5.0 (I used 3.0.2.0) from this thread = https://forum.xda-developers.com/mate-8/general/twrp-3-0-2-0-mate-8-t3521215
After booting into TWRP on 7.0 the first thing i did was decrypt the data partition by going into Wipe -> Data -> Advanced and then changing it in the Change File System option from ext4 to ext2, and then back from 2 to 4.
It will take 20-30 mins to do going back to ext4, this is normal. then it is DONE
This allowed it to be wiped and decrypted for my AL10 model, otherwise you couldnt access the data partition properly. (And just wiping the data partition didnt work for some reason, not sure it just had errors.)
Then I flashed this rom and everything has gone smoothly since. Not a single worry at all in the world after that, no need to reflash any root privs or anything. Props to everyone for their software/firmwares respectively, I own none of this and am just saying how/what I did to get this working even after screwing it up.
If anyone accidentally flashes 7.0 over 6.0 and it wont boot, try this... ^^
EDIT - Changed, something I did didnt work the second time, fixed.
BrownyDroid said:
I fixed it!
If anyone tries to flash from 6.0 to 7.0 and it wont boot, do what i did //
Use EMUI Recovery to grab the latest running version and let that install if you can, and then update it to EMUI 5.0 on AL10
Then install TWRP on 5.0 (I used 3.0.2.0) from this thread = https://forum.xda-developers.com/mate-8/general/twrp-3-0-2-0-mate-8-t3521215
After booting into TWRP on 7.0 the first thing i did was decrypt the data partition by going into Wipe -> Data -> Advanced and then changing it in the Change File System option from 4 to 1, and then back from 1 to 4.
This allowed it to be wiped and decrypted for my AL10 model, otherwise you couldnt access the data partition properly. (And just wiping the data partition didnt work for some reason, not sure it just had errors.)
Then I flashed this rom and everything has gone smoothly since. Not a single worry at all in the world after that, no need to reflash any root privs or anything. Props to everyone for their software/firmwares respectively, I own none of this and am just saying how/what I did to get this working even after screwing it up.
If anyone accidentally flashes 7.0 over 6.0 and it wont boot, try this... ^^
Click to expand...
Click to collapse
Sorry but i don't understund, in whipe>data>change file system i have ext2, ext3, ext4, fat, exfat, f2fs. What i do? Thanks.
Inviato dal mio SM-N920F utilizzando Tapatalk
Some apps crash while navigating inside. Best example: Google Play Store, after clicking "read more" when showing app details. Other example: In Signal Messenger when entering a conversation.
I flashed Open Gapps Pico version.
Any suggestions?
[email protected] said:
You need to get into twrp, full wipe and restore or flash your previous rom.
Click to expand...
Click to collapse
entonjackson said:
Some apps crash while navigating inside. Best example: Google Play Store, after clicking "read more" when showing app details. Other example: In Signal Messenger when entering a conversation.
I flashed Open Gapps Pico version.
Any suggestions?
Click to expand...
Click to collapse
I never flashed Gapps, i went into HiApp and installed the play store through there and then updated it, worked perfectly.
After i reinstalled the rom because of some errors with the camera i was getting i ended up having some problems with google play services but I just downloaded the latest online and installed it, been smooth since.
AND i can confirm, im not getting and "read more" crashes or Messenger crashes whatsoever. Sorry to hear about your problem! If it keeps happening try backing up data, reflashing the rom or flash stock first then reflash it and try installing google play store through HiApp.
I have a NXT-DL00 with a custom rom , rooted,TWRP etc... can I install your NXT-AL10 version?
batman74 said:
Sorry but i don't understund, in whipe>data>change file system i have ext2, ext3, ext4, fat, exfat, f2fs. What i do? Thanks.
Inviato dal mio SM-N920F utilizzando Tapatalk
Click to expand...
Click to collapse
Sorry! Updated.
I went and changed it from ext4 to ext2 which took only less than 1 min, and then from ext2 to ext4 which took about half an hour.
Then it worked!
(Sorry for the confusion)
---------- Post added at 09:31 AM ---------- Previous post was at 09:28 AM ----------
stratanic said:
I have a NXT-DL00 with a custom rom , rooted,TWRP etc... can I install your NXT-AL10 version?
Click to expand...
Click to collapse
If you try anyways, make sure you make a backup of your current rom before flashing and tell us what you did/results.
If its on a 6.0 rom you can follow the mini guide I had written, get yourself into EMUI 5.0 before you flash it. either by the official updater if you can by Restoring through the EMUI recovery back to stock and updating, or flashing an EMUI 5 rom and getting 3.0.2-0 twrp on there first.
Update : Been running this rom on EMUI 5.0 since release and it is super stable and amazing to run.
Been the best rom ive had on my Mate 8, definitely deserves some more attention. My battery life is about 15-25% better than emui 4.x and the phone doesnt have wakelock and app sleep problems for me at all compared to previous roms ive used.
We just need this rom with Kang VIP and it would be 110% sweet!
Waiting for a release of Xposed to come out so i can test and report back.
ive seen some users installing this rom over the latest kangvip, that way one has best of both worlds
Sent from my Huawei Mate 8 NXT-AL10
jbmc83 said:
ive seen some users installing this rom over the latest kangvip, that way one has best of both worlds
Sent from my Huawei Mate 8 NXT-AL10
Click to expand...
Click to collapse
Hi jbmc....how to do? You mean flash kang and then dirty flash HRT? How will have both functionalities?
Also, in OP it is not clear what to wipe and what not to...
"Card brush is not necessary after the success of double-clear, otherwise it may lead to ROOT failure"....what this means exactly?
There is a new hrt b584 version available , I saw it available on the Chinese website but don't have baidu