Related
On my HTC One V I unlock bootloader and rooted it successfully. It was working fine, but about 1-2 weeks later, when I was chatting with my friends on Messenger, it was starting to lag like hell until i couldn't do antyhing. I tried to turn it off and on with the power button. When I turned it on, firstly the logo "Quietly Brilliant" appeared and then...there was just a black screen. The phone was still turned on, but just with a black screen.. a slightly lighter black screen. I tried to turn it on and of. I can go to fast boot mode with Volume down+power button. I tried factory reset, but there was still the black screen. I send it to the manufacture, but they said, that the hardware is destroyed, because I've changed it. I think they mean I changed it with root and unlocking the bootloader...but I think that's not true? I don't think root or unlocking bootloader can change hardware. Yet I tried to unroot and relock the bootloader, but I can't do It if I can't connect my phone to my pc anymore. So my questions are:
1)How could I change the hardware?
2)How can I connect my phone to pc?
3)Is there a way to save my phone?
4)How does the manufacture know, that my phone is rooted when it can't be turned on, or connected to pc
5)Do they just lie about the hardware, so I must pay for it?
first of all, are you gsm or cdma? (do you have a sim?) If you can access bootloader, then you can fix your phone (99,9% of times). all you need to do is flash another rom with the correct kernel
mr_nooby said:
first of all, are you gsm or cdma? (do you have a sim?) If you can access bootloader, then you can fix your phone (99,9% of times). all you need to do is flash another rom with the correct kernel
Click to expand...
Click to collapse
Yes, I have s sim..so I have gsm i think? Right now, the manufacture is sending me back my phone. What is the bootloader exactly? Do you mean the combination of the keys volume down+power button?
If yes and I can acces to bootloader, how can I flash the rom with the correct kernel? Does it mean, my phone will be back to normal like it was at the start?
If I can't acces to bootloader, is there still a way to repair my phone?
btw I can't connect my phone to my pc...at least It didn't worked.
Don't worry, when you get back your phone tell me. If you can access your bootloader we will get your phone back to normal :thumbup:
mr_nooby said:
Don't worry, when you get back your phone tell me. If you can access your bootloader we will get your phone back to normal :thumbup:
Click to expand...
Click to collapse
Thank you very much!! How can I contact you when I get my phone back?
lddangsta said:
Thank you very much!! How can I contact you when I get my phone back?
Click to expand...
Click to collapse
first thing, when you get your phone back access the bootloader, hit fastboot and connect the phone to the pc (then after some seconds try vol up or down), it should say fastboot usb. tell me if it does (write it here)
mr_nooby said:
first thing, when you get your phone back access the bootloader, hit fastboot and connect the phone to the pc (then after some seconds try vol up or down), it should say fastboot usb. tell me if it does (write it here)
Click to expand...
Click to collapse
My phone is back. How can I access bootloader?
lddangsta said:
My phone is back. How can I access bootloader?
Click to expand...
Click to collapse
When starting your phone, hold the VOLUME DOWN BUTTON and Power buttons together
Seraz007 said:
When starting your phone, hold the VOLUME DOWN BUTTON and Power buttons together
Click to expand...
Click to collapse
When It's turned off, I hold the volume down button and power button together for 10 seconds. Then I let it go, but there's no bootloader mode. Before I sended it to the manufacture, I somehow did it, but I don't remember how.
lddangsta said:
When It's turned off, I hold the volume down button and power button together for 10 seconds. Then I let it go, but there's no bootloader mode. Before I sended it to the manufacture, I somehow did it, but I don't remember how.
Click to expand...
Click to collapse
Okay I got it. I couldn't access to bootloader because my phone was connected to my pc
mr_nooby said:
first thing, when you get your phone back access the bootloader, hit fastboot and connect the phone to the pc (then after some seconds try vol up or down), it should say fastboot usb. tell me if it does (write it here)
Click to expand...
Click to collapse
Yesm It said fastboot usb. What now?
mr_nooby said:
first thing, when you get your phone back access the bootloader, hit fastboot and connect the phone to the pc (then after some seconds try vol up or down), it should say fastboot usb. tell me if it does (write it here)
Click to expand...
Click to collapse
Yes, it said fastboot usb. What now?
Hey sorry I have to go to school now.. I'll write a little guide as soon as I come back, be patient. In order you have to unlock and root (if you haven't done it already), flash a recovery (I suggest twrp recovery, you can find it in android development or original android development-This also only if you don't have that already), factory reset from recovery, mount usb storage, copy rom to your phone, unmount, flash the rom, reboot into bootloader and flash the correct kernel found in the rom thread. This should work. I'll give you a hit when I get back tough.
mr_nooby said:
Hey sorry I have to go to school now.. I'll write a little guide as soon as I come back, be patient. In order you have to unlock and root (if you haven't done it already), flash a recovery (I suggest twrp recovery, you can find it in android development or original android development-This also only if you don't have that already), factory reset from recovery, mount usb storage, copy rom to your phone, unmount, flash the rom, reboot into bootloader and flash the correct kernel found in the rom thread. This should work. I'll give you a hit when I get back tough.
Click to expand...
Click to collapse
Its bootloader is unlocked and it's rooted. Now for the recovery i found this:
http://www.teamw.in/project/twrp2/119
They say I should download the newest recovery img, access bootloader, select fastboot, plug the device into computer and run the command:
fastboot flash recovery recoveryfilename.img into command prompt right?
Yes its right. Then you boot into recovery, and mount usb storage and with the pc copy a rom into the sd card, then unmount, from the recovery go to wipe - > factory reset, once it's done go to install and select the zip of the rom. When it's done, go back to the home page of recovery, and from there press reboot bootloader. Now do fastboot, and from the pc, put kernel in fastboot folder (the same place where you put your recovery to flash it), open cmd and type fastboot flash boot nameofkernel.img, wait for it to complete, reboot and enjoy!
mr_nooby said:
Yes its right. Then you boot into recovery, and mount usb storage and with the pc copy a rom into the sd card, then unmount, from the recovery go to wipe - > factory reset, once it's done go to install and select the zip of the rom. When it's done, go back to the home page of recovery, and from there press reboot bootloader. Now do fastboot, and from the pc, put kernel in fastboot folder (the same place where you put your recovery to flash it), open cmd and type fastboot flash boot nameofkernel.img, wait for it to complete, reboot and enjoy!
Click to expand...
Click to collapse
When I type "fastboot flash recovery recoveryfilename.img" into the command prompt..it tells me:'fastboot' is not recognized as an internal or external command, operable program or batch file
Have you downloaded the fastboot folder? And have you located it in cmd?
lddangsta said:
When I type "fastboot flash recovery recoveryfilename.img" into the command prompt..it tells me:'fastboot' is not recognized as an internal or external command, operable program or batch file
Click to expand...
Click to collapse
i think you'll be better off flashing recovery by the all in one toolkit
mr_nooby said:
Have you downloaded the fastboot folder? And have you located it in cmd?
Click to expand...
Click to collapse
I have a folder named Android an there's: adb.exe, AdbWinApi.dll, fastboot.exe, Unlock_code.bin
Do you mean this?
Yes, now create a folder on the desktop called fastboot and copy those files in that folder. Then in cmd type cd desktop (enter) cd fastboot (enter), put the recovery in that folder, connect the phone on fastboot usb and type the recovery command
Hi guys
After installing new version of Android 4.4 I've managed to install all gapps but now I can't do factory reset.The phone stuck into Huawei logo.Also I have same problem if I want to enter in recovery.
ulise73 said:
Hi guys
After installing new version of Android 4.4 I've managed to install all gapps but now I can't do factory reset.The phone stuck into Huawei logo.Also I have same problem if I want to enter in recovery.
Click to expand...
Click to collapse
You need to reflash stock recovery...
Use the recovery found in this file:
http://www.androidfilehost.com/?fid=23252070760973876
Extract from the zip and flash using fastboot commands.
jimbo77 said:
You need to reflash stock recovery...
Use the recovery found in this file:
http://www.androidfilehost.com/?fid=23252070760973876
Extract from the zip and flash using fastboot commands.
Click to expand...
Click to collapse
maybe I'm a noob and you can help:how can I do fastboot commands?Thanks again!
ulise73 said:
maybe I'm a noob and you can help:how can I do fastboot commands?Thanks again!
Click to expand...
Click to collapse
Sure...
Download this file and extract it anywhere your computer...
Right click anywhere inside the folder holding the shift key and click on "Open command window here", after this a cmd window will appear...
Connect your phone and type:
adb devices
if you see an output showing your phone type
adb reboot bootloader
the phone will boot to Huawei Logo, then type:
fastboot flash recovery recovery.img
after it completes the process type
fastboot reboot
and after that you'll be able to perform a factory reset...
jimbo77 said:
Sure...
Download this file and extract it anywhere your computer...
Right click anywhere inside the folder holding the shift key and click on "Open command window here", after this a cmd window will appear...
Connect your phone and type:
adb devices
if you see an output showing your phone type
adb reboot bootloader
the phone will boot to Huawei Logo, then type:
fastboot flash recovery recovery.img
after it completes the process type
fastboot reboot
and after that you'll be able to perform a factory reset...
Click to expand...
Click to collapse
hi,
i have the same problem, i tried your solution, but it didn't work
the huawei logo is on all the time, when i reset by pressing the on/off button several seconds, it start, en keeps restart. till the logo upears, en than it stops. not reconized trough usb, and not to turn off...
sorry for my bad english
Press the power button and volume up/down at the same time, for several seconds, you should enter stock recovery.
If you don't have the update.app in your dload folder remove the sdcard, insert it into a sd adaptor,put it on your pc/laptop and copy the update.app into dload folder.
ZuperStyler said:
Press the power button and volume up/down at the same time, for several seconds, you should enter stock recovery.
If you don't have the update.app in your dload folder remove the sdcard, insert it into a sd adaptor,put it on your pc/laptop and copy the update.app into dload folder.
Click to expand...
Click to collapse
tried it, but the pc doesn't reconize my phone, i can not execute adb commands. i tried it, but he keeps searching for devices.
en by pressing the 3 buttons, my phone turns off and on, and stops at the huawei ascend logo
and this screens keeps showing, till my battery is empty.
cowe said:
tried it, but the pc doesn't reconize my phone, i can not execute adb commands. i tried it, but he keeps searching for devices.
en by pressing the 3 buttons, my phone turns off and on, and stops at the huawei ascend logo
and this screens keeps showing, till my battery is empty.
Click to expand...
Click to collapse
Install the drivers, or open HiSuite, that should do it.
I tried to do that. cmd but it says:
adb server did not ack
unkown host service.
jimbo77 said:
Sure...
Download this file and extract it anywhere your computer...
Right click anywhere inside the folder holding the shift key and click on "Open command window here", after this a cmd window will appear...
Connect your phone and type:
adb devices
if you see an output showing your phone type
adb reboot bootloader
the phone will boot to Huawei Logo, then type:
fastboot flash recovery recovery.img
after it completes the process type
fastboot reboot
and after that you'll be able to perform a factory reset...
Click to expand...
Click to collapse
im having the same problem my phone still stuck at logo for a week now please help I updated to b125 .I have pressed power buttons vol up nd down it just restarts and stuck at logo downloaded the "Stock_boot&recovery_B118" opend command but when I type "adb devices " it says adb is not recognized as a internal or external operable program or ,batch file
I have opend the cmd while hi suite is open but nothing seems to be working for me .also I have put update in dload folder in sdcard but its not reading that .
Very gratefull for any solutions I haven't tryd pliz ....also @jimbo77 wanted to ask is there a a stock boot and recovery for B125 not the one I have
iscaac said:
im having the same problem my phone still stuck at logo for a week now please help I updated to b125 .I have pressed power buttons vol up nd down it just restarts and stuck at logo downloaded the "Stock_boot&recovery_B118" opend command but when I type "adb devices " it says adb is not recognized as a internal or external operable program or ,batch file
I have opend the cmd while hi suite is open but nothing seems to be working for me .also I have put update in dload folder in sdcard but its not reading that .
Very gratefull for any solutions I haven't tryd pliz ....also @jimbo77 wanted to ask is there a a stock boot and recovery for B125 not the one I have
Click to expand...
Click to collapse
If you phone stuck at boot adb will not work. Type fastboot devices. It will show ???? Device found. Then type fastboot comands to install recovery or boot.
Sent from my P6-U06 using xda app-developers app
husen4u said:
If you phone stuck at boot adb will not work. Type fastboot devices. It will show ???? Device found. Then type fastboot comands to install recovery or boot.
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
is there something im doing wrong here HELP PLEASE
iscaac said:
is there something im doing wrong here HELP PLEASE
Click to expand...
Click to collapse
Yep. You are doing it wrong...
In the zip file you downloaded there are two files:
1.- boot.img
2.- recovery.img
Now you need to follow this guide to flash them to your phone:
http://forum.xda-developers.com/showthread.php?t=2636231
Since your phone is not booting instead of following the adb commands you need to push both volume - and Power Buttons at the same time while you plug the usb cable to enter fastboot mode.
Once in fastboot mode follow the guide (from step 4 onwards) to flash the kernel (boot.img) and stock recovery (recovery.img)
Once you have flashed both, put any ROM in the dload folder of your external SDCARD. and then reboot the phone using the 3 button combo (Volume + , VOlume - and Power Button) Note that the phone needs to be unplugged from the computer...
jimbo77 said:
Yep. You are doing it wrong...
In the zip file you downloaded there are two files:
1.- boot.img
2.- recovery.img
Now you need to follow this guide to flash them to your phone:
http://forum.xda-developers.com/showthread.php?t=2636231
Since your phone is not booting instead of following the adb commands you need to push both volume - and Power Buttons at the same time while you plug the usb cable to enter fastboot mode.
Once in fastboot mode follow the guide (from step 4 onwards) to flash the kernel (boot.img) and stock recovery (recovery.img)
Once you have flashed both, put any ROM in the dload folder of your external SDCARD. and then reboot the phone using the 3 button combo (Volume + , VOlume - and Power Button) Note that the phone needs to be unplugged from the computer...
Click to expand...
Click to collapse
I still get same error message when I try to flash kernel and recovery
=> Install the Universal Android USB Driver from the link below:
http://adbdriver.com/upload/AdbDriverInstaller.exe
=> Download and install ADB and Fast Boot from thebelow link.
http://fs1.d-h.st/download/00103/KIP/adb-setup-1.2.exe
=> Extract the Stock ROM using the Tool "Huawei Update Extractor" in the computer.
=>"HuaweiUpdateExtractor download link:
http://dl.xda-developers.com/attachdl/a0f6b6cc9f19468bb6c24278361a3044/532549ec/2/6/3/0/2/4/2/HuaweiUpdateExtractor_0.9.7.9_Setup.zip
=> Copy and paste the Stock/TWRP Recovery and BOOT.img in the "ADB and Fast Boot" folder.
=> Connect the HAM to the computer using the supplied USB cable.
=> Press and hold the Power and Volume Down button.
=> HAM will be recognized as ABD device.
=> Leave the Power and Volume Down button.
=> Double click to open the installed "ADB and Fast Boot" from the Desktop or open the computer prompt to access the "ADB and Fast Boot" folder.
=> In the ADB and Fast Boot prompt:
=> Type: fastboot reboot-bootloader.
=> Type: fastboot flash BOOT BOOT.img
=> Type fastboot flash RECOVERY RECOVERY.img
Fastboot will flash the image and give you a success/failure notification. If successful, you're all set.
Finally, press and hold the Power button. HAM will boot now
fastboot: that's the executable tool
flash: that's the function we want the fastboot tool to perform
recovery: this is the name of the partition we want to flash into. since we are flashing a recovery image, it needs to go to the recovery partition.
recovery.img: this is the name of the actual file to flash. Your file name may be different. Just make sure it matches the actual file name.
i can't download Huawei Update Extractor
Azharla08 said:
=> Install the Universal Android USB Driver from the link below:
http://adbdriver.com/upload/AdbDriverInstaller.exe
=> Download and install ADB and Fast Boot from thebelow link.
http://fs1.d-h.st/download/00103/KIP/adb-setup-1.2.exe
=> Extract the Stock ROM using the Tool "Huawei Update Extractor" in the computer.
=>"HuaweiUpdateExtractor download link:
http://dl.xda-developers.com/attachdl/07eee0ca707d998e0074fe7066df2e1b/5324e778/2/6/3/0/2/4/2/HuaweiUpdateExtractor_0.9.7.9_Setup.zip
=> Copy and paste the Stock/TWRP Recovery and BOOT.img in the "ADB and Fast Boot" folder.
=> Connect the HAM to the computer using the supplied USB cable.
=> Press and hold the Power and Volume Down button.
=> HAM will be recognized as ABD device.
=> Leave the Power and Volume Down button.
=> Double click to open the installed "ADB and Fast Boot" from the Desktop or open the computer prompt to access the "ADB and Fast Boot" folder.
=> In the ADB and Fast Boot prompt:
=> Type: fastboot reboot-bootloader.
=> Type: fastboot flash BOOT BOOT.img
=> Type fastboot flash RECOVERY RECOVERY.img
Fastboot will flash the image and give you a success/failure notification. If successful, you're all set.
Finally, press and hold the Power button. HAM will boot now
fastboot: that's the executable tool
flash: that's the function we want the fastboot tool to perform
recovery: this is the name of the partition we want to flash into. since we are flashing a recovery image, it needs to go to the recovery partition.
recovery.img: this is the name of the actual file to flash. Your file name may be different. Just make sure it matches the actual file name.
Click to expand...
Click to collapse
i can't download Huawei Update Extractor,there is something wrong with the link?
enlove said:
i can't download huawei update extractor,there is something wrong with the link?
Click to expand...
Click to collapse
link updated
Azharla08 said:
link updated
Click to expand...
Click to collapse
i can't download also
enlove said:
i can't download also
Click to expand...
Click to collapse
Get it from here
http://forum.xda-developers.com/showthread.php?t=2433454
svvv said:
Get it from here
http://forum.xda-developers.com/showthread.php?t=2433454
Click to expand...
Click to collapse
thinks!
can i use this to huawei y320-u10
because i tried to go to recovery mode and it pops out to android laying down and saying no command
kllnn8 said:
can i use this to huawei y320-u10
because i tried to go to recovery mode and it pops out to android laying down and saying no command
Click to expand...
Click to collapse
Yes you can do it provided if you have update.app file for your mobile and boot.img/recovery.img extracted from your update.app
where can i find update.app for huawei y320-u10?
Huawei ascend mate -
I rooted the device few days back and i also intastalled few fonts and was working like charm, i wanted to change the font and downloaded new font, apply -- restart--- disaster.... gone.. Now my PHONE is not starting up .. it stays awake in start up screen.. i tried Hard RESET .. but there were no files in cache as well recovery ..when i try to charge the update.app into sd in recovery mode, the phone don't see the file inside...plz help me.
No help for me? Please, i'm desperate.....
cloche said:
No help for me? Please, i'm desperate.....
Click to expand...
Click to collapse
Jus try this rom http://forum.xda-developers.com/showthread.php?t=2688699
Its b923 emui 2.0 beta version
Install as per the steps provided in the link
Make sure you put ur phone in Bootloader mode(Power + Vol down) before executing the .bat file.
Once installed and booted to OS copy the update.app file to dload folder in ur external sdcard goto settings and update using local mode that should install automatically.
But I cannot make the phone in USB debugging if it's stuck........and another thing.......I don't have the bootloader unlocker....
cloche said:
But I cannot make the phone in USB debugging if it's stuck........and another thing.......I don't have the bootloader unlocker....
Click to expand...
Click to collapse
Just put the mobile in bootloader mode and run the bat file. No need to enable debugging mode.
ignore first three installation steps in the above link...u start from step 4
no need to have unlocked bootloader
Many many Thanks for your help,
but I can not enter in bootloader mode, if i press vol down and power the phone remains with the written "Huawei Ascend".....instead i have no problem to enter in recovery with vol up + down + power.......i do not understand why.....
cloche said:
Many many Thanks for your help,
but I can not enter in bootloader mode, if i press vol down and power the phone remains with the written "Huawei Ascend".....instead i have no problem to enter in recovery with vol up + down + power.......i do not understand why.....
Click to expand...
Click to collapse
Press and hold the Power button and then press and hold the volume UP button to enter into fast recovery mode.
Then, download and extract the file Bootloader unlock from the link "http://goo.im/devs/joestone/Mate/MT1_BL_unlock.EXE" and Flash the files in fastboot.
Doesnt' work for me...
Out an errore message, Can not find the unlock.bat file...
cloche said:
Many many Thanks for your help,
but I can not enter in bootloader mode, if i press vol down and power the phone remains with the written "Huawei Ascend".....instead i have no problem to enter in recovery with vol up + down + power.......i do not understand why.....
Click to expand...
Click to collapse
first u have to connect the USB cable then switch off the mobile, now press the power button along with the volume down button the screen should say Huawei Ascend and will stay in that screen. Make sure all the drivers are installed only then it will get detected in ur PC check the Device manager in ur PC for android device if its there then ur mobile is detected. After all these steps execute the batch file.
MY FRIEND!!!!!!!!!!!!!!
The phone it's running now!!!!!!!!!
But actually i have a 4.2.2. chinese rom.........how i made to put the stock firm???
Thanks in advance, your are the best!!!!!!
cloche said:
MY FRIEND!!!!!!!!!!!!!!
The phone it's running now!!!!!!!!!
But actually i have a 4.2.2. chinese rom.........how i made to put the stock firm???
Thanks in advance, your are the best!!!!!!
Click to expand...
Click to collapse
Thats great...
Jus copy the update.app file to dload folder in ur external sdcard goto settings->about and update using local mode that should install automatically.
A few months ago I decided to try and root my Nexus 7 (2013) tablet. At this time I simply cannot remember what process I used but all I know is that everytime I try to power it on the system start screen comes on where it asks what country you're in and so forth. But I also get the following Pop Up Error message "Unfortunately, Google Keyboard Has Stopped" and an "OK" button. When I click on OK the error message simply pops back up in a never ending loop. It stops at the SELECT WI-FI screen and won't let me input the access code because of the Pop Up Error message.
Does anyone have any idea how to completely wipe the system and bring it back to stock or just to the point I can do "anything"?
Thank you in advance for your assistance!
Boot into fastboot by holding volume down and power while the tablet is off. Scroll through the options with volume keys. When you see the option recovery mode at the top of the screen, press power. This will boot you into recovery. From there, there will be several option. One of which should be a hard reset. navigate using the volume keys. You should be OK from here.
sent from my nex7
Thank you for your reply but unfortunately this doesn't work. It puts me right back to where I always end up and still get the Error Message stated above.
I've been working on this for a few hours now and nothing! It basically says I don't have a Keyboard installed after I do anything. If I Factory reset it I get the same Error Message about no keyboard.
Any ideas? PLEASE HELP!
That is really weird. Do you have a custom recovery installed? Custom ROM? Does the computer find it? because flashing a stock image may be the way to go from here.
sent from my nex7
mugzylol said:
That is really weird. Do you have a custom recovery installed? Custom ROM? Does the computer find it? because flashing a stock image may be the way to go from here.
sent from my nex7
Click to expand...
Click to collapse
Thank you for your reply. I greatly appreciate you taking the time. I am at wits end at this point and simply need it to run again. Can you talk me through loading whatever to get it back to new? I'll take anything at this point. Everything is backed up so I have nothing to lose. How can I load the original image? (non rooted)
Thank you!
I AM NOT RESPONSIBLE FOR ANYTHING IF IT GOES WRONG (it should not go wrong though)
First you will need an image. Search for a stock 2013 nexus 7 image. Than you will need to download google USB drivers :
http://developer.android.com/sdk/win-usb.html
Than install them by opening the device manager program which is installed by default on any windows computer. Plug your tablet in, right click it in device manager and press update driver software and browse for the driver you downloaded. Than install it.
Now that that is done download the android SDK.
http://developer.android.com/sdk/index.html
Extract just the SDK folder (the other parts are not needed) and enter it once extracted. Click on the platform tools folder, hold shift and right click. Click on
"open new command window here"
Now put your tablet into fastboot mode. Type
"fastboot devices" in the command window. If there is something that shows up this means that your tablet is recognized.
Now type "fastboot OEM unlock" in the command window. Select yes on your tablet with volume keys and click power on your tablet. Than it will run through the unlock bootloader practice. This will erase all content on the tablet. It may take a bit.
Once that is done, put your image in the tablets internal storage.
Now download the latest twrp for your device.
http://teamw.in/project/twrp2/193
Press download latest .img
Now, put your twrp image in the platform tools folder and name it something easy to type. Now, in the command window type:
Fastboot boot (name of your twrp here).IMG
This will boot into twrp. It will not install it.
Now, in twrp press install and browse for your image (must be a .zip file) and flash it. If all goes well than reboot your system. If there is a problem try another image.
You do not need to unlock bootloader or install drivers again. Just boot back in to twrp and flash another image (if it goes wrong)
Stuck
mugzylol said:
I AM NOT RESPONSIBLE FOR ANYTHING IF IT GOES WRONG (it should not go wrong though)
First you will need an image. Search for a stock 2013 nexus 7 image. Than you will need to download google USB drivers :
http://developer.android.com/sdk/win-usb.html
Than install them by opening the device manager program which is installed by default on any windows computer. Plug your tablet in, right click it in device manager and press update driver software and browse for the driver you downloaded. Than install it.
Now that that is done download the android SDK.
http://developer.android.com/sdk/index.html
Extract just the SDK folder (the other parts are not needed) and enter it once extracted. Click on the platform tools folder, hold shift and right click. Click on
"open new command window here"
Now put your tablet into fastboot mode. Type
"fastboot devices" in the command window. If there is something that shows up this means that your tablet is recognized.
Now type "fastboot OEM unlock" in the command window. Select yes on your tablet with volume keys and click power on your tablet. Than it will run through the unlock bootloader practice. This will erase all content on the tablet. It may take a bit.
Once that is done, put your image in the tablets internal storage.
Now download the latest twrp for your device.
http://teamw.in/project/twrp2/193
Press download latest .img
Now, put your twrp image in the platform tools folder and name it something easy to type. Now, in the command window type:
Fastboot boot (name of your twrp here).IMG
This will boot into twrp. It will not install it.
Now, in twrp press install and browse for your image (must be a .zip file) and flash it. If all goes well than reboot your system. If there is a problem try another image.
You do not need to unlock bootloader or install drivers again. Just boot back in to twrp and flash another image (if it goes wrong)
Click to expand...
Click to collapse
OK, a couple of things;
1. I'm using a MacBook Pro. Does this make any difference? (It says I don't have to download any drivers using a Mac but other than that is there any differences?)
2. I'm stuck at ..... Extract just the SDK folder (the other parts are not needed) and enter it once extracted. Click on the platform tools folder, hold shift and right click. Click on "open new command window here". Now put your tablet into fastboot mode. Type "fastboot devices" in the command window. If there is something that shows up this means that your tablet is recognized.
Everything I do doesn't work. When I hold down Shift and Right-Click on the Platform Tools Folder I do not see "open new command window here". Is this the "platform-tools folder under the SDK folder?
Do you have any windows computers because this will not work without one
sent from my nex7
---------- Post added at 08:27 AM ---------- Previous post was at 08:25 AM ----------
This is because Mac computers do not execute batch scripts and the fastboot commands are made to execute through a command prompt rather than a Linux terminal
sent from my nex7
I honestly made this way too complicated. Just run through setup without using the keyboard. Find an unprotected network (like McDonald's) that works and find a way to get your hands on an apk of any keyboard and install it. I'm not quite sure how you can get a download link to a keyboard with no account (yet) and no keyboard but there must be a way. Its a simple issue that causes so many problems. So in a nutshell, if you can find a way to install an apk of any keyboard, your good
sent from my nex7
Success is disgusted by some people, and will not share any files for free in the future.
Success!!!
This is awesome! Thanks much. I don't understand what you mean by "Factory setting must be restored after booting" though. Do you mean you need to go into Recovery mode and wipe the data?
Here's some instructions I put together that would have helped save me a lot of time. Please correct anything I missed:
After you have downloaded the zip file, here are the step-by-step instructions:
1. Extract the zipped folder wherever you want on your PC.
2. Open a CMD window.
3. cd /d <whatever path it is to the "\ASUS_ROG2_ZS660KL_QPST_Firmware\images" folder> e.g., "cd /d D:\RogPhoneII\ASUS_ROG2_ZS660KL_QPST_Firmware\images"
4. Make sure your PC is connected to the side port of your phone and the phone is in fastboot mode (Volume UP button + Power button).
5. Check and make sure your PC is connected properly by entering "fastboot devices" in the command window. You should see the ID of your device.
6. Then enter "fastboot oem enter-dload" in the command window. This will put the phone in emergency download mode (EDL). My phone went all black.
7. Open "\ASUS_ROG2_ZS660KL_QPST_Firmware\MiFlash2018-5-28-0" folder. Launch "XiaoMiFlash.exe".
8. Click "refresh". You should see a device in the list.
9. Click "select" and navigate to the "\ASUS_ROG2_ZS660KL_QPST_Firmware\images" folder.
10. Click "flash". Wait until it says "success".
11. After it's done, you'll hold down the UP button, Down button, and Power button on the phone at the same time until it shuts down.
12. Hold Up button and Power button at same to boot into fastboot mode again. Select Recovery mode by using the Up/Down buttons on the phone. Press the Power button to select.
13. Select "wipe data" from the drop down list. Go down the list of "no" until you get to the "yes" and press the Power button.
14. Select "reboot now".
15. Done.
greywookiee said:
This is awesome! Thanks much. I don't understand what you mean by "Factory setting must be restored after booting" though. Do you mean you need to go into Recovery mode and wipe the data?
Here's some instructions I put together that would have helped save me a lot of time. Please correct anything I missed:
After you have downloaded the zip file, here are the step-by-step instructions:
1. Extract the zipped folder wherever you want on your PC.
2. Open a CMD window.
3. cd /d <whatever path it is to the "\ASUS_ROG2_ZS660KL_QPST_Firmware\images" folder> e.g., "cd /d D:\RogPhoneII\ASUS_ROG2_ZS660KL_QPST_Firmware\images"
4. Make sure your PC is connected to the side port of your phone and the phone is in fastboot mode (Volume UP button + Power button).
5. Check and make sure your PC is connected properly by entering "fastboot devices" in the command window. You should see the ID of your device.
6. Then enter "fastboot oem enter-dload" in the command window. This will put the phone in emergency download mode (EDL). My phone went all black.
7. Open "\ASUS_ROG2_ZS660KL_QPST_Firmware\MiFlash2018-5-28-0" folder. Launch "XiaoMiFlash.exe".
8. Click "refresh". You should see a device in the list.
9. Click "select" and navigate to the "\ASUS_ROG2_ZS660KL_QPST_Firmware\images" folder.
10. Click "flash". Wait until it says "success".
11. After it's done, you'll hold down the UP button, Down button, and Power button on the phone at the same time until it shuts down.
12. Hold Up button and Power button at same to boot into fastboot mode again. Select Recovery mode by using the Up/Down buttons on the phone. Press the Power button to select.
13. Select "wipe data" from the drop down list. Go down the list of "no" until you get to the "yes" and press the Power button.
14. Select "reboot now".
15. Done.
Click to expand...
Click to collapse
Hi is the ASUS_ROG2_ZS660KL_QPST_Firmware\images
Folder in the zip you posted? Where do I find it?
PJay83 said:
Hi is the ASUS_ROG2_ZS660KL_QPST_Firmware\images
Folder in the zip you posted? Where do I find it?
Click to expand...
Click to collapse
The first entry of this thread.
Is the official firmware WW or CN?
I'm just thinking this is probably an easier way for CN guys to get WW if the QPST fw is WW
cheetah2k said:
Is the official firmware WW or CN?
I'm just thinking this is probably an easier way for CN guys to get WW if the QPST fw is WW
Click to expand...
Click to collapse
ww
greywookiee said:
This is awesome! Thanks much. I don't understand what you mean by "Factory setting must be restored after booting" though. Do you mean you need to go into Recovery mode and wipe the data?
Here's some instructions I put together that would have helped save me a lot of time. Please correct anything I missed:
After you have downloaded the zip file, here are the step-by-step instructions:
1. Extract the zipped folder wherever you want on your PC.
2. Open a CMD window.
3. cd /d <whatever path it is to the "\ASUS_ROG2_ZS660KL_QPST_Firmware\images" folder> e.g., "cd /d D:\RogPhoneII\ASUS_ROG2_ZS660KL_QPST_Firmware\images"
4. Make sure your PC is connected to the side port of your phone and the phone is in fastboot mode (Volume UP button + Power button).
5. Check and make sure your PC is connected properly by entering "fastboot devices" in the command window. You should see the ID of your device.
6. Then enter "fastboot oem enter-dload" in the command window. This will put the phone in emergency download mode (EDL). My phone went all black.
7. Open "\ASUS_ROG2_ZS660KL_QPST_Firmware\MiFlash2018-5-28-0" folder. Launch "XiaoMiFlash.exe".
8. Click "refresh". You should see a device in the list.
9. Click "select" and navigate to the "\ASUS_ROG2_ZS660KL_QPST_Firmware\images" folder.
10. Click "flash". Wait until it says "success".
11. After it's done, you'll hold down the UP button, Down button, and Power button on the phone at the same time until it shuts down.
12. Hold Up button and Power button at same to boot into fastboot mode again. Select Recovery mode by using the Up/Down buttons on the phone. Press the Power button to select.
13. Select "wipe data" from the drop down list. Go down the list of "no" until you get to the "yes" and press the Power button.
14. Select "reboot now".
15. Done.
Click to expand...
Click to collapse
Yes
cheetah2k said:
Is the official firmware WW or CN?
I'm just thinking this is probably an easier way for CN guys to get WW if the QPST fw is WW
Click to expand...
Click to collapse
I think you're right.
---------- Post added at 07:56 AM ---------- Previous post was at 07:53 AM ----------
greywookiee said:
I think you're right.
Click to expand...
Click to collapse
Though, you still want to be able to do updates and stuff without needing someone to break all the files out into separate images. This was a huge life saver thanks to John.
Please help me. I have widevine security L3 instead of L1 (also at relock bootloader). Here is what happen to me:
1. Unlock the bootloader and get persist.img, but wrong size of package then i have lost the serial number (C4ATAS000000). The size of persist file is 16mb instead of 32mb by default.
2. Try to get another persist.img from another device, then use Ultra editor to find and change back to my real Serial Number. And it worked.
3. Figure out widevine security is always stay at L3, whenever bootloader is re-locked. Also Asus unlock bootloader apk from asus homepage is not working, it said "error network".
4. Do flash raw from all version, also factory reset...etc but no luck.
.............................................
Do you know what is really happened when we flash wrong persist.img and flash another persist (which is already change Serial number back to real one)?
Mistake
If your phone can only enter EDL mode (9008 mode)
this firmware is glad to help you. It can be flashed in through
the QPST tool, or it can be flashed in through the Xiaomi miflash tool.
To use the QPST tool, you must change the EMMC to UFS. No matter which tool you use,
you must restore the factory settings after the phone is turned on, otherwise the storage
of the phone will recognize the error! !! !!
Factory settings must be restored after booting! !! !!
The firmware is made through the official package UL-ASUS_I001_1-ASUS-16.0631.1910.35-1.1.207-user.zip
without any modification, Suitable for repairing phones that can only enter edl mode(9008 mode).
File Downlaod link:https://drive.google.com/open?id=1Pk...Sf6cDq7SuJiBBu
Click to expand...
Click to collapse
godmode post! thank you sir! Fixed my bricked rog 2
johnny886 said:
If your phone can only enter EDL mode (9008 mode)
this firmware is glad to help you. It can be flashed in through
the QPST tool, or it can be flashed in through the Xiaomi miflash tool.
To use the QPST tool, you must change the EMMC to UFS. No matter which tool you use,
you must restore the factory settings after the phone is turned on, otherwise the storage
of the phone will recognize the error! !! !!
Factory settings must be restored after booting! !! !!
The firmware is made through the official package UL-ASUS_I001_1-ASUS-16.0631.1910.35-1.1.207-user.zip
without any modification, Suitable for repairing phones that can only enter edl mode(9008 mode).
File Downlaod link:https://drive.google.com/open?id=1Pkt2k82JtK66DzJn3tSf6cDq7SuJiBBu
Click to expand...
Click to collapse
How do I change To use the QPST tool, you must change the EMMC to UFS. No matter which tool you use.
ltth said:
How do I change To use the QPST tool, you must change the EMMC to UFS. No matter which tool you use.
Click to expand...
Click to collapse
Thanks!
ltth said:
Thanks!
Click to expand...
Click to collapse
Hi, I've managed to unbrick my ROG Phone II Tencent Edition 8/128 with a locked bootloader having "slot _a" error. Provided that you can do fastboot.
My equipment for flashing, for sure you already have ADB installed in your computer, my computer is an x64 Intel Windows 10 laptop, I used USB 2.0 not USB 3.0
Credit to @johnny886 for the sharing the tool,
"If your phone can only enter EDL mode (9008 mode)
this firmware is glad to help you. It can be flashed in through
the QPST tool, or it can be flashed in through the Xiaomi miflash tool.
To use the QPST tool, you must change the EMMC to UFS. No matter which tool you use, -(I personally :did" not change anything, I just downloaded the file and followed grewookie's instruction below )
you must restore the factory settings after the phone is turned on, otherwise the storage
of the phone will recognize the error! !! !!
Factory settings must be restored after booting! !! !!
The firmware is made through the official package UL-ASUS_I001_1-ASUS-16.0631.1910.35-1.1.207-user.zip
without any modification, Suitable for repairing phones that can only enter edl mode(9008 mode).
File Downlaod link: https://drive.google.com/open?id=1Pk...Sf6cDq7SuJiBBu"
Credits to @greywookiee for the super clear instruction:
"Here's some instructions I put together that would have helped save me a lot of time. Please correct anything I missed:
After you have downloaded the zip file, here are the step-by-step instructions:
1. Extract the zipped folder wherever you want on your PC.
2. Open a CMD window.
3. cd /d <whatever path it is to the "\ASUS_ROG2_ZS660KL_QPST_Firmware\images" folder> e.g., "cd /d D:\RogPhoneII\ASUS_ROG2_ZS660KL_QPST_Firmware\imag es"
4. Make sure your PC is connected to the side port of your phone and the phone is in fastboot mode (Volume UP button + Power button).
5. Check and make sure your PC is connected properly by entering "fastboot devices" in the command window. You should see the ID of your device.
6. Then enter "fastboot oem enter-dload" in the command window. This will put the phone in emergency download mode (EDL). My phone went all black.
7. Open "\ASUS_ROG2_ZS660KL_QPST_Firmware\MiFlash2018-5-28-0" folder. Launch "XiaoMiFlash.exe".
8. Click "refresh". You should see a device in the list.
9. Click "select" and navigate to the "\ASUS_ROG2_ZS660KL_QPST_Firmware\images" folder.
10. Click "flash". Wait until it says "success".
11. After it's done, you'll hold down the UP button, Down button, and Power button on the phone at the same time until it shuts down.
12. Hold Up button and Power button at same to boot into fastboot mode again. Select Recovery mode by using the Up/Down buttons on the phone. Press the Power button to select.
13. Select "wipe data" from the drop down list. Go down the list of "no" until you get to the "yes" and press the Power button.
14. Select "reboot now".
15. Done."
followed the steps until number 8 after i clicked refresh the MI app stopped responding (not responding).. dont know what im doing wrong..
tuannghia1985 said:
Please help me. I have widevine security L3 instead of L1 (also at relock bootloader). Here is what happen to me:
1. Unlock the bootloader and get persist.img, but wrong size of package then i have lost the serial number (C4ATAS000000). The size of persist file is 16mb instead of 32mb by default.
2. Try to get another persist.img from another device, then use Ultra editor to find and change back to my real Serial Number. And it worked.
3. Figure out widevine security is always stay at L3, whenever bootloader is re-locked. Also Asus unlock bootloader apk from asus homepage is not working, it said "error network".
4. Do flash raw from all version, also factory reset...etc but no luck.
.............................................
Do you know what is really happened when we flash wrong persist.img and flash another persist (which is already change Serial number back to real one)?
Click to expand...
Click to collapse
请问要怎么得到另一个设备的persist.img，然后怎么编辑sn，最后要怎么写入手机？有具体的步骤 吗
Mod Traduction :
May I ask how to get the persist.img of another device, then how to edit the sn, and finally how to write it to the phone? Are there specific steps?
Click to expand...
Click to collapse
葫芦娃搞奥特曼 said:
请问要怎么得到另一个设备的persist.img，然后怎么编辑sn，最后要怎么写入手机？有具体的步骤 吗
Click to expand...
Click to collapse
Get another user persist.img (with correct 32.768 kb)
Using HEX editor or Ultra Edit to find SSN, ISN and IMEI in persist.img
Return to fastboot - then 9008 mode, use bat to write back to your phone and you will have back Asus unlock bootloader apk (working), have Serial number back.
For question: "How could i find real SSN, ISN and real IMEI?"
Please use command "fastboot oem device-info" in fastboot mode, it will show your real information.
Br,
greywookiee said:
This is awesome! Thanks much. I don't understand what you mean by "Factory setting must be restored after booting" though. Do you mean you need to go into Recovery mode and wipe the data?
Here's some instructions I put together that would have helped save me a lot of time. Please correct anything I missed:
After you have downloaded the zip file, here are the step-by-step instructions:
1. Extract the zipped folder wherever you want on your PC.
2. Open a CMD window.
3. cd /d <whatever path it is to the "\ASUS_ROG2_ZS660KL_QPST_Firmware\images" folder> e.g., "cd /d D:\RogPhoneII\ASUS_ROG2_ZS660KL_QPST_Firmware\images"
4. Make sure your PC is connected to the side port of your phone and the phone is in fastboot mode (Volume UP button + Power button).
5. Check and make sure your PC is connected properly by entering "fastboot devices" in the command window. You should see the ID of your device.
6. Then enter "fastboot oem enter-dload" in the command window. This will put the phone in emergency download mode (EDL). My phone went all black.
7. Open "\ASUS_ROG2_ZS660KL_QPST_Firmware\MiFlash2018-5-28-0" folder. Launch "XiaoMiFlash.exe".
8. Click "refresh". You should see a device in the list.
9. Click "select" and navigate to the "\ASUS_ROG2_ZS660KL_QPST_Firmware\images" folder.
10. Click "flash". Wait until it says "success".
11. After it's done, you'll hold down the UP button, Down button, and Power button on the phone at the same time until it shuts down.
12. Hold Up button and Power button at same to boot into fastboot mode again. Select Recovery mode by using the Up/Down buttons on the phone. Press the Power button to select.
13. Select "wipe data" from the drop down list. Go down the list of "no" until you get to the "yes" and press the Power button.
14. Select "reboot now".
15. Done.
Click to expand...
Click to collapse
johnny886 said:
If your phone can only enter EDL mode (9008 mode)
this firmware is glad to help you. It can be flashed in through
the QPST tool, or it can be flashed in through the Xiaomi miflash tool.
To use the QPST tool, you must change the EMMC to UFS. No matter which tool you use,
you must restore the factory settings after the phone is turned on, otherwise the storage
of the phone will recognize the error! !! !!
Factory settings must be restored after booting! !! !!
The firmware is made through the official package UL-ASUS_I001_1-ASUS-16.0631.1910.35-1.1.207-user.zip
without any modification, Suitable for repairing phones that can only enter edl mode(9008 mode).
File Downlaod link:https://drive.google.com/open?id=1Pkt2k82JtK66DzJn3tSf6cDq7SuJiBBu
Click to expand...
Click to collapse
Just 2 doubts:
1. Will I get OTA update after doing this?
2. I am on A10 Beta 6. will It be successful to roll back to this firmware?
Hi in Mi Flash when i refresh and select flash it gives me an error object reference not set to an instance of an object please help me
Help
Gives me Sarahah error on QPST and also gives a flash error on MI flash