glass screen replacement - LG V20 Accessories

Got this weird little chip at the bottom of the screen.. happened when the phone was in my pocket too..
I know its not much, but if screen replacement is cheap, i would do it. ANyone do it? or have a shop do theirs?
I know its not too bad, but when u making payments on the device, would be nice to have it still looking new.
I remember from my S4 days, it was advised to do the screen swap with the glue stuff..

Mine just cracked too luckily I'm insured​.
Sent from my LG-LS997 using Tapatalk

Related

Anyone had screen replaced?

Hi, has anyone had their screen replaced by HTC? I have some pretty deep scratches on mine and was wondering how much it would cost.
Thanks.:good:
I had mine replaced, but under warranty. I think it's somewhere around 150 quid.
Same here £150
Sent from my GT-I9300 using Tapatalk 2
I had changed mine. My touchscreen panel was broken because I dropped the phone accidentally. I also was suffering from "yellow stains" issue on screen.
And with unrooting/relocking and a good scenario I put the device under terms of guarantee :laugh:.
Took a whole month (to the spare lcd and touchscreen to be delivered and being repaired) but it was worth it! Phone is now good as new, and no yellow stains on lcd.
So just make up a good scenario, it may work for you.

Help Glass cracked. thinking about changing it

Ive never dropped a cellphone but today was that day. I had bought an invisible shield to put it on today when i got home. Right when i got home i put the phone in my pocket but it had it had hole. BAM. it dropped down my leg and hit the concrete face down. It shattered the digitizer but the lcd is intact. My question was, would i be able to buy a digitizer and change it without having to pay 180 for a new digitizer/lcd ? any help would be appreciated.
Sent from my SGH-T999 using xda app-developers app
I'm fairly sure I've read that the digitizer is fused with the screen.
Yeah there's no way going around it. They're glued together as one piece.
FFFFFFFUUUUUUUU dammit
Sent from my SGH-T999 using xda app-developers app
I spoke to some rep from samsung yesterday on my phone and they said it would be 179.99 to fix it. But my question is, do i have to include the lcd ? Because my lcd isnt broke and they sell the glass on ebay for 20 bucks. I would rather try and fix it myself and break it, THEN send it to samsung if i cant fix it instead of paying 180 bucks for just some glass since my lcd is not broken and have them rip me off because they will def reuse my lcd and win anyways.
kobe4rings said:
I spoke to some rep from samsung yesterday on my phone and they said it would be 179.99 to fix it. But my question is, do i have to include the lcd ? Because my lcd isnt broke and they sell the glass on ebay for 20 bucks. I would rather try and fix it myself and break it, THEN send it to samsung if i cant fix it instead of paying 180 bucks for just some glass since my lcd is not broken and have them rip me off because they will def reuse my lcd and win anyways.
Click to expand...
Click to collapse
It's been answered.. if you want to do it yourself you're going to end up breaking your LCD and need to buy the part or send it to Samsung anyways. There is no way around it.
There is a video on YouTube with somebody changing only the glass. Check on YouTube so you will have an idea about how to do it and if you will be able.
Sent from my GT-I9300 using Tapatalk 2
I dont believe they are "fused" together. from my history in repairing phones, there is just a small sliver of double sided tape holding the digitizer to the LCD screen. and all you need to do is use a plastic seperating tool to slowly seperate the two. Also, use a good hot hair dryer to help melt away the adhesive. good luck!
Go to a hardware store and pick up a heat gun. Take the phone completely apart, take out all the electronics. Heat the screen evenly and slowly start pulling the screen up little by little while hitting it with the heat gun.
Take your time and don't rush. It can be done but it's not easy and can damage the LCD.
Sent from my SGH-T999 using Tapatalk 2
If you do this HEAT the **** out of the LCD and digitizer. It will be very hard to separate the two. Please take pictures and tell us you're approach to help other S3 users.
I had a long ass post written but now it's gone. boo.
anyways. Here's something to consider as to why you can't separate it. If you believe there's a way to get around it then good luck.
http://www.youtube.com/watch?v=es8gezSdKv4&feature=youtu.be

[Q] here's a new one, broken lcd, glass perfect, digitizer 50%?

so my loving, caring. soon-to-be wife, dropped her new note 2 off her lap onto our garage floor. she has a otterbox defender case and when we picked it up the glass was not cracked but the screen has a hairline crack running from the left middle along the side to the bottom. when we tried to turn it on, the screen turned on but the crack in the lcd was now obvious and the digitizer didnt work for the bottom half of the screen. now i realize that i probably have to replace the whole screen assembly but is the a person on here that can direct me to a local repair person in san diego or maybe a site where i can order it online for under $200?
i know its a long shot and the misses can still use the s pen to use the screen but we ended up leaving it off as over time i noticed the screen getting more and more pixelated from the crack line.
tl;dr front glass is perfect, managed to break lcd and digitizer, am i really boned?
Thats pretty amazing, you can aks sammy how much it will cost you if they repair it, but I dont think it will be under 200
Sent from my GT-N7100 using xda app-developers app
You're very unlucky..How did it crack with an Otterbox ??Bad karma..However i fell sorry for you and your note 2..Contact Sammy and see what can you do..You can try to replace it yourself but you'll lost the warranty..
so turns out the phone still had warranty and i dont need a receipt! (traded our old iphone 4s's for two note 2's plus $200 cash on craigslist) called samsung and told them that the phone all of a sudden had cracks under the glass and was very "hot" from charging, they are replacing it no questions asked! thanks anyways guys, il be sure to buy my wife a clutch for her phablet
Nice .! Move ...n thanx for idea.... :thumbup:
Sent from my GT-N7100 using xda premium

Replacing just the glass

I shattered my screen a few weeks ago and had great results replacing just the glass, not the digitizer, however I have a small problem. I didn't realize the adhesive was still on the LCD, I kind of ruined it along the left side of my phone, it doesn't stick properly, kind of looks like a bad screen protector. I have to keep pushing it down to get rid of the haze. What I'm wondering is, can I remove the adhesive all together and just replace the sticker bit along the border of the glass, so there's no adhesive between the glass and LCD without it affecting the performance of the touch screen? It works great as is, the haze is just annoying me.
Any help would be greatly appreciated, I'd hate to do it and lose the ability to use my phone
Sent from my Samsung Galaxy Note II using Xparent Purple Tapatalk 2
May i ask how you replaced the glass, and where you bought it? Shattered mine couple of days ago...
Ghetto_Cowgirl said:
I shattered my screen a few weeks ago and had great results replacing just the glass, not the digitizer, however I have a small problem. I didn't realize the adhesive was still on the LCD, I kind of ruined it along the left side of my phone, it doesn't stick properly, kind of looks like a bad screen protector. I have to keep pushing it down to get rid of the haze. What I'm wondering is, can I remove the adhesive all together and just replace the sticker bit along the border of the glass, so there's no adhesive between the glass and LCD without it affecting the performance of the touch screen? It works great as is, the haze is just annoying me.
Any help would be greatly appreciated, I'd hate to do it and lose the ability to use my phone
Sent from my Samsung Galaxy Note II using Xparent Purple Tapatalk 2
Click to expand...
Click to collapse
My English is not my native language, but considering the word adhesive, you must referring to the double side tape part that holds the digitizer and the glass together.
Assuming that, from my own experience it is a no-go. If you are experiencing sticking parts (ie. it's not properly glued) I am afraid you might have to replace the whole adhesive.
I had the same issue on my Desire HD and about 1 month after replacement, same as you kept pushing it to take the haze away, the inevitable happened. A tiny opening not being able to see with the naked eye, left enough room for dust to enter under the glass. One month later, there was so much dust in it that I had to buy a new full screen.
However, months later, I tried some old trick for future experiments You can eventually take a paint dryer, and try to heat up the lose part then applying some light pressure onit. This process should make the glue on the adhesive very soft and with a bit of luck it might stick on the glass.
I'd say perhaps 60-70 degrees. Don't worry, even 100 degrees won't break your screen unless u're heating it up for more than 10 minutes or so
GL
Fantastic, I'll give heat a try to get it to stick. Unfortunately I can't find the double sided tape anywhere otherwise I'd replace it. I'm in Australia so shipping is pretty expensive from most places outside of the country. I really appreciate the reply
I bought the glass alone off eBay, I believe it was around $30. To replace it took a lot of patience, a hairdryer on low for 15 mins to heat the glue up, finding a spot to slowly pry the glass away from the LCD. As I said, a lot of patience and a lot of mess since my screen was badly cracked and kept breaking off. Was worth it to save $300 though. Figured I could do it for $30 myself and if it broke I'd have had to of paid for both either way
Sent from my Samsung Galaxy Note II using Xparent Purple Tapatalk 2
It seems you already build enough experience with heating up the device. I hope it does the trick for you. On the other hand the adhesive itself shouldn't be much of a problem. They are not made by Samsung itself and if it's not working and still refuse to buy a new glass, I'd just go to a repair shop as I did here in the Netherlands and ask the repair guy to order it. It shouldn't cost more than a few bucks. On top of that just google "note 2 screen adhesive" and look at some amazon/ebay hits, just take that picture/info to the repair guy as a reference to know what to order
matzone said:
It seems you already build enough experience with heating up the device. I hope it does the trick for you. On the other hand the adhesive itself shouldn't be much of a problem. They are not made by Samsung itself and if it's not working and still refuse to buy a new glass, I'd just go to a repair shop as I did here in the Netherlands and ask the repair guy to order it. It shouldn't cost more than a few bucks. On top of that just google "note 2 screen adhesive" and look at some amazon/ebay hits, just take that picture/info to the repair guy as a reference to know what to order
Click to expand...
Click to collapse
Im from the netherlands too, which shops do you recommend? I bought my phone at coolblue, but I dont want to lose my phone for 2 weeks with repair..
Sent from my GT-N7100 using xda app-developers app
Ghetto_Cowgirl said:
I shattered my screen a few weeks ago and had great results replacing just the glass, not the digitizer, however I have a small problem. I didn't realize the adhesive was still on the LCD, I kind of ruined it along the left side of my phone, it doesn't stick properly, kind of looks like a bad screen protector. I have to keep pushing it down to get rid of the haze. What I'm wondering is, can I remove the adhesive all together and just replace the sticker bit along the border of the glass, so there's no adhesive between the glass and LCD without it affecting the performance of the touch screen? It works great as is, the haze is just annoying me.
Any help would be greatly appreciated, I'd hate to do it and lose the ability to use my phone
Sent from my Samsung Galaxy Note II using Xparent Purple Tapatalk 2
Click to expand...
Click to collapse
Check out the link in my signature. You'll find what you're looking for with regards to the adhesive.
Sent from my GT-N7100 using xda premium

[Q] Is My Digitizer Broken or do I have main board issues?

I have an LS970 and I recently dropped it pretty hard onto a desk. The bottom quarter of the screen stopped working after the drop along with the capacitive touch buttons at the bottom. I was able to deal with this but today when I sat on the couch my phone fell again and a crack went down the middle of the digitizer. Now only some areas work and I am not able to unlock it. Before I buy a new digitizer and lcd I want to know if it could have also been main board issues that made the bottom part of the screen not work since no cracks appeared after dropping it on a desk. Thanks
I am about 99% sure its ya digitizer/LCD ... The main bored is tucked well in the middle of the phone ....I have pictures up on the sim card mod thread if u wanna c ...
Sent from my LG-LS970 using Tapatalk 4
Alright thanks. I'll go ahead and order a new lcd/digitizer tonight. I hate how they're combined as my lcd is fine but I'd rather fix it than buy another phone.
Thanks again.
bigfdaddy2 said:
I am about 99% sure its ya digitizer/LCD ... The main bored is tucked well in the middle of the phone ....I have pictures up on the sim card mod thread if u wanna c ...
Sent from my LG-LS970 using Tapatalk 4
Click to expand...
Click to collapse
It's the digitizer. I have a wonderful wife whom I love very much who has broken her screen three times. Each time that the screen broke, the digitizer went with it. It has to do with the fact that there is essentially no separation between the two on our phones, so drops that damage the screen almost always damage the digitizer.
Xiutehcuhtli said:
It's the digitizer. I have a wonderful wife whom I love very much who has broken her screen three times. Each time that the screen broke, the digitizer went with it. It has to do with the fact that there is essentially no separation between the two on our phones, so drops that damage the screen almost always damage the digitizer.
Click to expand...
Click to collapse
I just picked up a broken LG Optimus G off craigslist and toward the bottom of the screen it has a hairline crack. Also the capacitive buttons do not work either....my problem sounds exactly like the OP.
Can anyone suggest a good place to buy a cheap digitizer/glass/ LCD?? I'm lookin on ebay and they seem to be about $80
Thanks,
Kevin
I've been looking around ebay too and they're all about 80 for the cheapest. I checked out a few phone repair websites and prices are much higher there. If you find anything cheaper let me know. I plan on buying it soon.
EDIT: The best I found on ebay was 78 was from the US and 69 from China. I know they are all from china but it's just a shipping time thing.
Nurmi_CEO said:
I just picked up a broken LG Optimus G off craigslist and toward the bottom of the screen it has a hairline crack. Also the capacitive buttons do not work either....my problem sounds exactly like the OP.
Can anyone suggest a good place to buy a cheap digitizer/glass/ LCD?? I'm lookin on ebay and they seem to be about $80
Thanks,
Kevin
Click to expand...
Click to collapse
Based on the dialogue I had when my wife's screen broke not only with the insurance carrier but also a repair shop, replacing the screen or digitizer on this phone is always going to be very expensive because both parts almost always have to be replaced together. $80 sounds very inexpensive to me based on those conversations.
Xiutehcuhtli said:
Based on the dialogue I had when my wife's screen broke not only with the insurance carrier but also a repair shop, replacing the screen or digitizer on this phone is always going to be very expensive because both parts almost always have to be replaced together. $80 sounds very inexpensive to me based on those conversations.
Click to expand...
Click to collapse
U can separate them but their is a special jig that has to be used ....
Sent from my LG-LS970 using Tapatalk 4

Categories

Resources