I'm pretty new at this. Was just given this phone, was going to do the update from HTC Sync, which I have since realized I shouldnt have done anyway, the phone got disconnected during the update and is now bricked. I can hold the volume button and power and get to the htc download mode. When I press reboot to bootloader, the boot to recovery mode it shows an exclamation point in an upside down triangle.
I've searched for hours trying to find a way to reflash the factory firmware and am not having any luck. If anyone could help I would greatly appreciate it.
Download the RUU and flash it
Thats my problem, where do I get it?
I'd really appreciate any help. I've got no phone right now, lol.
deernet said:
I'd really appreciate any help. I've got no phone right now, lol.
Click to expand...
Click to collapse
The RUU attached to this post should work beautifully for you.
https://forum.xda-developers.com/desire-526/general/verizon-htc-desire-526-boot-loader-root-t3587118
You can also read through that thread of mine to unlock your bootloader and root the phone.
Heres a direct link to the RUU.
http://www.mediafire.com/file/bd2u64...y4/0PM3IMG.zip
Unzip the download.
Copy the 0PM3IMG.zip that is inside to a SD Card.
Put the sdcard in the phone.
Boot the phonr into download mode.
Hit volume up key to flash the ruu.
You will most likely need to do it 2 times.
Possibly more. If the phone reboots without flashing everything do it again.
You will see when it flashes system files. If it flashes system it is good to go.
Reboot the phone.
Enjoy the Fresh Out of the Box phone.
Please hit the thanks button.
@deernet Did what @BigCountry907 shared help you fix your phone?
It was a copy of the factory RUU. Rom Update Utility.
HTC way of running an update from the sd
Most of the time you can find them.
BigCountry907 said:
The RUU attached to this post should work beautifully for you.
https://forum.xda-developers.com/desire-526/general/verizon-htc-desire-526-boot-loader-root-t3587118
You can also read through that thread of mine to unlock your bootloader and root the phone.
Heres a direct link to the RUU.
http://www.mediafire.com/file/bd2u64...y4/0PM3IMG.zip
Unzip the download.
Copy the 0PM3IMG.zip that is inside to a SD Card.
Put the sdcard in the phone.
Boot the phonr into download mode.
Hit volume up key to flash the ruu.
You will most likely need to do it 2 times.
Possibly more. If the phone reboots without flashing everything do it again.
You will see when it flashes system files. If it flashes system it is good to go.
Reboot the phone.
Enjoy the Fresh Out of the Box phone.
Please hit the thanks button.
Click to expand...
Click to collapse
I am having the same problem. I followed your directions exactly, but I receive a failed message. I've tried several times without success. Is there any thing else I can try?
badHTC526 said:
I am having the same problem. I followed your directions exactly, but I receive a failed message. I've tried several times without success. Is there any thing else I can try?
Click to expand...
Click to collapse
I successfully flashed a RUU on this device. I can walk you through it
Sent from my Desire 526 using XDA Labs
Figlet said:
I successfully flashed a RUU on this device. I can walk you through it
Sent from my Desire 526 using XDA Labs
Click to expand...
Click to collapse
I also received a failed message -2,19. Any help would be appreciated. Wondering if maybe the zip is just corrupted as I downloaded it with ADM?
Vyrrus2k9 said:
I also received a failed message -2,19. Any help would be appreciated. Wondering if maybe the zip is just corrupted as I downloaded it with ADM?
Click to expand...
Click to collapse
If I remember right, I booted to fastboot and typed 'fastboot oem RebootRuu' (without quotes) to get to the RUU flashing fastboot partition, then I flashed the smaller hboot ruu zip first, and the other large ruu 2nd.
I used the file downloaded by htc sync manager and cancelled the software update before it finished decompressing the archive.
I sold the one I was using but I have another at the house. I need to order a battery and screen for it and then I'll record a step by step of my method. Might be a week or so
(Sorry for the edits; I forgot the quote)
Thank you. Any help is greatly appreciated.
Well, I still haven't ordered anything for it. Taxes are coming back late, so I'm flat broke, but I haven't forgot about you. I remember it taking me a few tries to get the order just right, but once I figured it out the phone updated like butter. I had ended up soft-bricking it using the bootloader unlock method provided by @BigCountry907.
Have you gone back and tried it again? A lot of times I'll put a phone up in the box and come back to it and have it done in minutes if I just leave it alone for a while.
Will download zip file again and try it again. You never know. Can't hurt!
Any direction as to how to flash my phone if it keeps failing with my previously stated errors? I think it has a virus and it is acting possessed and generally driving me crazy. Thanks in advance!
mediafire link is dead
Thank work now :good:
Mediafire Link is Dead again
Anybody having this 0PM3IMG.zip file somewhere?
Related
I downloaded the executable, ran it and I get the following error:
USB Connection Error (Something like that)
The phone reboots and just says htc. The executable is waiting for boot loader and times out after a minute or so.
I unplug the usb after the executable errors out and it instantly goes to a boot loader screen with ruu. I cannot run anything and have no choice but to battery pull.
According to the RUU thread, one person mentioned having to complete part 2 of rooting so i did that. I still cannot return this thing to stock!!!
I need to send it back to sprint, but I gotta get it back to stock first.
How the crap do I get this back to stock!
I'd reply in the RUU thread, but it looks like the last guy who posted never got a response...hopefully this thread will get me an answer.
adb reboot into recovery using "adb reboot recovery" then enable USB and run the RUU
dreamliner330 said:
I downloaded the executable, ran it and I get the following error:
USB Connection Error (Something like that)
The phone reboots and just says htc. The executable is waiting for boot loader and times out after a minute or so.
I unplug the usb after the executable errors out and it instantly goes to a boot loader screen with ruu. I cannot run anything and have no choice but to battery pull.
According to the RUU thread, one person mentioned having to complete part 2 of rooting so i did that. I still cannot return this thing to stock!!!
I need to send it back to sprint, but I gotta get it back to stock first.
How the crap do I get this back to stock!
I'd reply in the RUU thread, but it looks like the last guy who posted never got a response...hopefully this thread will get me an answer.
Click to expand...
Click to collapse
I ran in to the same issue just now. I couldn't fix it, but here is how to do essentially the same thing.
Follow this guide to extract the RUU
Rename the rom.zip file you extract to PC36IMG.zip and put it on the root of your SD card
Reboot into the bootloader, it will load the file and ask if you wanna install it, you should do so
It'll finish and ask if it should reboot, choose yes and boot into a stock phone.
Its a driver issue, at least it was for me, the google drivers don't work for the htc ruu application. You need the htc drivers install for the phone to be recognized by the rom updater. Hope that helps.
i had that issue too, for me it was the drivers. i then used my work computer and it allowed me to use the RUU
I always had to run a ruu from fastboot in order for it to work
YMMV, but I had to run the oldest RUU first when I was at 1.47 level, and then re-run 1.47 RUU for it to work. Otherwise, bootloader would never get pickup up.
I always had to restart the RUU after I got the error first. Run it again after it times out, when your phone is sitting at the HTC screen and it will work.
Just install the latest HTC Sync and you're set. That will fix your issue. Install HTC Sync and run the RUU afterwards.
Geniusdog254 said:
I ran in to the same issue just now. I couldn't fix it, but here is how to do essentially the same thing.
Follow guide to extract the RUU
Rename the rom.zip file you extract to PC36IMG.zip and put it on the root of your SD card
Reboot into the bootloader, it will load the file and ask if you wanna install it, you should do so
It'll finish and ask if it should reboot, choose yes and boot into a stock phone.
Click to expand...
Click to collapse
Perfect! Exactly what I was looking for. I was able to load that ROM. I think it's still rooted though, I can get to the menu by pressing volume down/power.
Any ideas?
ideas on what?
Your being vague.
I like turtles.
Sent from my PC36100 using XDA App
dreamliner330 said:
Perfect! Exactly what I was looking for. I was able to load that ROM. I think it's still rooted though, I can get to the menu by pressing volume down/power.
Any ideas?
Click to expand...
Click to collapse
Any ideas if my phone is still rooted, or what I need to do to get it back 100% to the way I got it from Sprint.
You can always got into that recovery when holding down vol and pwr. If you go to recovery you should only see a triangle and an exclamation. That means you are not rooted.
Sent from my PC36100 using XDA App
dreamliner330 said:
Any ideas if my phone is still rooted, or what I need to do to get it back 100% to the way I got it from Sprint.
Click to expand...
Click to collapse
At this time there isn't a way to get your Evo 100% back to stock. Why do you quote yourself?
^I quoted myself because mattrb thought I was being vague, and I didn't want anyone to be confused, so I emphasized my previous post which was clear enough, I thought....and I was right!
Thanks guys for all the help. In the end, I used the copied the RUU ROM to the SDCARD, named it PC36IMG and restarted the phone holding volume down...the rest was automatic.
hey dreamliner did u use the 1.47 ruu or the 1.32? I am in need of the same thing but I cant get the 1.47 to run...
would this work renaming the zip and copying it to the mSD card?
http://www.sdx-downloads.com/sdx/evo/stock/OTA_Supersonic_1.47.651.1-1.32.651.6_release.zip
I cant get the RUU to extract using process manager, and only once have I gotten the 1.47 RUU to boot the device into bootloader and tried again with the phone on the HTC black screen, unplugged, re plugged and thenran it again and it was giving me the 170 usb error again.
Geniusdog254 said:
I ran in to the same issue just now. I couldn't fix it, but here is how to do essentially the same thing.
Follow guide to extract the RUU
Rename the rom.zip file you extract to PC36IMG.zip and put it on the root of your SD card
Reboot into the bootloader, it will load the file and ask if you wanna install it, you should do so
It'll finish and ask if it should reboot, choose yes and boot into a stock phone.
Click to expand...
Click to collapse
Is there a thank you button or rep on this forum, because you just saved me from the same problem. I give you a BIG HEARTY THANKS!!!!
bcnice20 said:
I always had to run a ruu from fastboot in order for it to work
Click to expand...
Click to collapse
This is the easy solution, worked for me. No need to make things more complicated by extracting the rom.zip.
As bcnice said just run the RUU and when your phone is showing the HTC logo and you get the USB error just rerun the RUU.
I rooted then unrooted my phone. Or else I thought I unrooted it and the first time I tried to boot back up it did nothing. I tried popping the batt out and that didn't work. Can't boot to "boot up" menu by hitting power and volume down either.
Thoughts?
What was the process you took to unroot it? That will help us figure out what may have went wrong.
root problem
I downloaded
PB31IMG.zip
I copied the zip file to my SD card and booted with power and down volume. Selected update then when it was supposed to restart it did nothing.
OH F*** did you check the md5
Sent from my ADR6300 using XDA App
jackson55 said:
I downloaded
PB31IMG.zip
I copied the zip file to my SD card and booted with power and down volume. Selected update then when it was supposed to restart it did nothing.
Click to expand...
Click to collapse
Where did you get it from? Im willing to bet you have an SLCD and you downgraded to 2.1
I'm sorry I don't know what MD5 is. I'm a novice at this. I can't put the website on the blog here until after the 8th post I believe to prevent spam.
jackson55 said:
I'm sorry I don't know what MD5 is. I'm a novice at this. I can't put the website on the blog here until after the 8th post I believe to prevent spam.
Click to expand...
Click to collapse
Type it out then. Or atleast give us a general idea. Keyword? Name minus the .com
Help me help you kiddo.
Still won't let me put in the link but it was from a megashares site. I did read a bit about SLCD bricking. Yikes.
http://d01.megashares.com/index.php?d01=CHoQD3B
hey buddy don't panic Doug and the guys over at WWW.incredibleforum.com have a slcd brick solution.
Sent from my ADR6300 using XDA App
???
What is the site that led you to this DL link??
I can tell you thats exactly what you did. You can run the RUU or flash the correct PB31IMG through hboot blindly
Correct PB31IMG: http://dougpiston.com/files/RUU/bui...and-2.15.00.07.28-hboot-0.92.0000_PB31IMG.zip
RUU: http://dougpiston.com/files/RUU/RUU...4k_NV_1.70_PRL58006_release_152016_signed.exe
You'll need to install HTC sync to run the RUU.
doug piston said:
I can tell you thats exactly what you did. You can run the RUU or flash the correct PB31IMG through hboot blindly
Disregard my post the man chimed in himself LOL. Good looking out Doug.
Correct PB31IMG: http://dougpiston.com/files/RUU/bui...and-2.15.00.07.28-hboot-0.92.0000_PB31IMG.zip
RUU: http://dougpiston.com/files/RUU/RUU...4k_NV_1.70_PRL58006_release_152016_signed.exe
You'll need to install HTC sync to run the RUU.
Click to expand...
Click to collapse
Sent from my ADR6300 using XDA App
That would be awesome. When you get a moment if you could provide the link that would be great. In the meantime, I'll charge my bb pearl when I get home. No joke...that's my backup phone.
I forgot the mention that I formated my sd card to FAT32 prior to moving the unroot zip file there.
I googled "HTC Incredible unroot" and it was a few links down.
Ok,
I got the RUU file and I do have HTC Sync on my computer. I'm assuming I need to reformat my SD card prior to doing anything else? After that I'm lost as to the step by step.
RUU_Incredible_C_Froyo_VERIZON_WWE_3.26.605.1_Radio_2.15.00.07.28_2k4k_NV_1.70_PRL58006_release_152016_signed.exe
^^with the RUU it's pretty much this
1. have more than 30% battery
2. DO NOT UNPLUG AFTER IT HAS STARTED
3. run the RUU and follow the instructions
4. hopefully have a working Incredible instead of an Incredible Paperweight
( I did the same thing as you with my first Inc so I know )
EDIT: I see no need to format the SD card again, the phone can use it just fine on FAT32
Download and install HTC sync on to your pc. Then plug in phone to PC and run the RUU
All,
Boom! It works. I'm very grateful for your help. I ran the RUU, which went for about 5-10 min. I hit the power button and it works. Genius.
I tried to update my EVO radio this mornig. Now everytime I turn on my phone, it gets stuck in the boot animation. When I reboot to recovery, I get hboot, but when I choose recovery, it gets stuck on white HTC screen. I tried fastboot but after three re-installs of SDK, it still give me a this application fails to start because AdbWinApi.dll was not found. PLEASE SOMEONE HELP!!!!!
captainphoenixx said:
I tried to update my EVO radio this mornig. Now everytime I turn on my phone, it gets stuck in the boot animation. When I reboot to recovery, I get hboot, but when I choose recovery, it gets stuck on white HTC screen. I tried fastboot but after three re-installs of SDK, it still give me a this application fails to start because AdbWinApi.dll was not found. PLEASE SOMEONE HELP!!!!!
Click to expand...
Click to collapse
Have you tried using an RUU?
How do I load it to my device?
captainphoenixx said:
How do I load it to my device?
Click to expand...
Click to collapse
You don't load it to your device. Plug phone in with usb to computer. Launch RUU.exe and see if RUU finds the phone. If it does, then follow onscreen instructions.. Make sure phone is powered on when you launch RUU otherwise it will not recognize... Phone can be on white screen and still possibly be recognized depending on exactly what the problem is... If it is recognized follow onscreen instructions and at the end your phone will work again.
leenypost said:
You don't load it to your device. Plug phone in with usb to computer. Launch RUU.exe and see if RUU finds the phone. If it does, then follow onscreen instructions.. Make sure phone is powered on when you launch RUU otherwise it will not recognize... Phone can be on white screen and still possibly be recognized depending on exactly what the problem is... If it is recognized follow onscreen instructions and at the end your phone will work again.
Click to expand...
Click to collapse
If this method doesn't work you need to figure out how to get adb to work again.
Can you get to bootloader? When powered down hold volume down and power button at the same time...if so you can use the 3.30 pc36img posted somewhere in here or I have a copy with Amon recovery....if your rooted.
I Have Amon recovery, but after the update, it still gets stuck, and yes i can get to bootloader, just cant recover or flash
captainphoenixx said:
I Have Amon recovery, but after the update, it still gets stuck, and yes i can get to bootloader, just cant recover or flash
Click to expand...
Click to collapse
If you can get to bootloader an RUU should work for you. Give it a shot.
Here's a link to the thread. RUU link is in first post. Download it and follow the instructions I gave you earlier.
http://forum.xda-developers.com/showthread.php?t=874091
This is the newest RUU though that you flashed the radio from.. Once you get it working you will have to wait on a Root method that works to re-root the phone. Shouldn't be long. You can try an earlier RUU if you want but you'll have to find that in the Rom Sticky Post.
All you gottado is.put the pc36img on the root of your card and the bootloader will read it for you. Just let it run....
Sent from my PC36100 using XDA App
lawnguy said:
All you gottado is.put the pc36img on the root of your card and the bootloader will read it for you. Just let it run....
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Yep, that should work too. I forgot about that as I frequently just RUU'd and then re-rooted, LOL... Good call.
Get a pc36img.zip, place it on the SD card (not in a folder) and start up bootloader. The rest will be taken care of automatically.
If I was at home id send you one with Amon Ra its saved me a bunch if you don't get it tonight I can send it to you tomorrow ... I will keep checking this thread
Sent from my PC36100 using XDA App
I tried one of the rooting processes today and it didn't work. Now when I turn my Evo on it goes no further than the white HTC screen that you get when you turn it on. When I try to run the RUU it gets a connection error and won't go through. Can someone please help?
Robes1 said:
I tried one of the rooting processes today and it didn't work. Now when I turn my Evo on it goes no further than the white HTC screen that you get when you turn it on. When I try to run the RUU it gets a connection error and won't go through. Can someone please help?
Click to expand...
Click to collapse
If you pull the battery can you get to the bootloader screen? (hold volume down and power button when turning on)
You should be able to do what Greenfieldan suggests. It is possible to work through this issue, so don't fear but it make take a few tries.
Greenfieldan said:
If you pull the battery can you get to the bootloader screen? (hold volume down and power button when turning on)
Click to expand...
Click to collapse
once I get to this screen how do I get the RUU to connect to the phone? I've tried it several times from this screen and nothing is working.
Robes1 said:
once I get to this screen how do I get the RUU to connect to the phone? I've tried it several times from this screen and nothing is working.
Click to expand...
Click to collapse
Thread stalking is fun, I see which thread you are reading, but you may have to reset you phone.
Do you either:
Have a recovery installed (if you aren't sure, then you may not)
have a PCIMG36 on the root of your sdcard, (if you aren't sure then you may not)
Robes1 said:
once I get to this screen how do I get the RUU to connect to the phone? I've tried it several times from this screen and nothing is working.
Click to expand...
Click to collapse
Go in to fastboot and you should see something toward the top that says "FASTBOOT USB", once there run the RUU
SnoopDawg said:
Thread stalking is fun, I see which thread you are reading, but you may have to reset you phone.
Do you either:
Have a recovery installed (if you aren't sure, then you may not)
have a PCIMG36 on the root of your sdcard, (if you aren't sure then you may not)
Click to expand...
Click to collapse
I have a pc36img file on the root of my sd card. It says that it can't open it when i select flash zip from sd card.
Just download the actual ruu from http://forum.xda-developers.com/showthread.php?t=884060. It will be one of the .exe files same version of you had on the phone will prolly work best. Then do what xhausx said and run the ruu file once there. Thanks xhausx btw cause i was confused too.
aclearersky said:
Just download the actual ruu from http://forum.xda-developers.com/showthread.php?t=884060. It will be one of the .exe files same version of you had on the phone will prolly work best. Then do what xhausx said and run the ruu file once there. Thanks xhausx btw cause i was confused too.
Click to expand...
Click to collapse
or download an unrooted version of your software in pc36img.zip format and boot into the bootloader and it will restore your phone to stock if you cant run any ruu
Need Help
I know this is an old thread, but I'm working on an old phone. Hopefully some of you guys are still following this.
My father has an EVO 3D that showed up one day stuck on the white HTC screen. The only remedy was to pull the battery. I thought it would be no big deal to just go into the boot menu and either try and run recovery, or at worst do a factory reset. Both of these options failed. I even made a few attempts at trying from the SD card with a ROM or two. So I downloaded the RUU direct from HTC thinking that would finally take care of the problem. But after connecting up in FASTBOOT mode and running the RUU, it eventually fails when the update gets to the point that it's supposed to restart the phone in bootloader mode. Because at that point the phone just restarts to the white HTC logo again, and the software times out telling me that it can't connect to the device. Any help here other than passing me a trash can Thanks in advance!
Let me just start off by saying poop.
I've been reading up on these forums quite a lot, equipping myself with enough knowledge to get going on using this phone to its potential.
After the anticipation of getting my DHD, I went about rooting it. I used this guide: http://forum.xda-developers.com/showthread.php?t=841076.
Everything went fine without much trouble. I completed all the steps in rooting it and gaing SU access. Also installed the Clockwork Recovery mod without a hiccup. I went on to install the Android Revolution ROM and going through the guide I used a tool called: 'Easy Wipe Upgrade.'
After installing this zip, the phone reboot and it just refuses to budge. Stuck on the HTC splash screen.
I've held down the bottom volume button with power and it gets me into HBOOT. I've tried a variety of option such as factory resets and nothing seems to be working.
My luck and phones. Just have a very expensive brick now sitting on my desk. Ah
I'd appreciate any help I can get please. Thanks.
I managed to resolve it!
Just FYI. Mounted the USB (Which was hidden fairly deeply) I guess you don't look when you panic? I then dropped on the ROM and installed it and boot up took a while but voila, it worked!
Well done, I would go mental if I bricked my phone. That's why I am still just reading up rather than trying things.
Sent from my Desire HD using XDA App
in the exact same situation as you where Could you go into abit more detail how you resolved this? currently have no phone cheers
whats wrong with your phone mate
Just so you know, as long as you have access to the bootloader (can be stock bootloader with S-ON, doesn't matter), 99% of the time you can 'unbrick' your phone by installing a stock RUU (PD98IMG.zip method) which returns your phone to complete stock.
If you install the wrong RUU while ENG HBOOT S-OFF then you can potentially fudge up your phone for good (unless you have Radio S-OFF, then you are fine - just install the correct RUU).
So don't worry, because there is nearly always a way to go back to how your phone was before you started hacking it.
prank1 said:
Just so you know, as long as you have access to the bootloader (can be stock bootloader with S-ON, doesn't matter), 99% of the time you can 'unbrick' your phone by installing a stock RUU (PD98IMG.zip method) which returns your phone to complete stock.
If you install the wrong RUU while ENG HBOOT S-OFF then you can potentially fudge up your phone for good (unless you have Radio S-OFF, then you are fine - just install the correct RUU).
So don't worry, because there is nearly always a way to go back to how your phone was before you started hacking it.
Click to expand...
Click to collapse
Here is a link to the pd98img.zip method if anyone wants it for reference.
thanks for the replies got it fixed as explained above cheers
DarkShadowAy said:
I managed to resolve it!
Just FYI. Mounted the USB (Which was hidden fairly deeply) I guess you don't look when you panic? I then dropped on the ROM and installed it and boot up took a while but voila, it worked!
Click to expand...
Click to collapse
My DHD is not starting up after i have applied s-off tool and the orange led light is on without pluggin in , by mounting USB can cure my problem ??
PLEASE HELP !!
dr.m0x said:
Here is a link to the pd98img.zip method if anyone wants it for reference.
Click to expand...
Click to collapse
hey guys, hope u could help me out.. i tried this RD1945's method.. got an ruu file, renamed the ruu file, then i put it on my micro sd card using a reader, then i plug it back in my phone, run hboot, the hboot parsed the zip file which i renamed according to the steps.. after it parsed it brought me back to the fastboot, recovery, restore factory defaults menu, etc... which i then chose fastboot then reboot... it reboots but im still stuck at the htc white splash screen for some time now.. what am i doin wrong? does it take long to start? sorry im a noob can someone explain to me how its done properly?
agonize said:
hey guys, hope u could help me out.. i tried this RD1945's method.. got an ruu file, renamed the ruu file, then i put it on my micro sd card using a reader, then i plug it back in my phone, run hboot, the hboot parsed the zip file which i renamed according to the steps.. after it parsed it brought me back to the fastboot, recovery, restore factory defaults menu, etc... which i then chose fastboot then reboot... it reboots but im still stuck at the htc white splash screen for some time now.. what am i doin wrong? does it take long to start? sorry im a noob can someone explain to me how its done properly?
Click to expand...
Click to collapse
You are not supposed to rename the RUU file, rather you run the RUU file and then afterwards locate the ROM.zip file located in your temp folder. This ROM.zip file is meant to be renamed PD98IMG.zip, NOT the RUU file.
ok that was stupid of me.. ok will try to give it a go..
sorry if this sounds stupid to you again.. but, i just wana be sure.. its my first smartphone..
anyway, i run the ruu file on my pc, yeah? so then when i run it, it asks me to connect my dhd using the usb cable.. so i did... but it couldnt detect my phone.. thus, it couldnt continue it's setup.. ;-( thank you for helping out..
Make sure you install HTC Sync, it should also install all the DHD USB drivers needed.
hey, do you have any step by step guide on doing this? im afraid il do something wrong again and just risk messing up the phone even more..
i have htc sync and the htc drivers on my laptop but when i connect the usb plug to my phone and try to run the ruu.. it still gives me the prompt of no connection from the pc and android phone.. :-| what am i doing wrong? sorry...
thanks in advance for the any help!
i managed to get to the update part.. but now it prompts a 131 error message.. :-( help?
http://forum.xda-developers.com/showthread.php?t=841890
Did u have a Look here...this shows the method and its very self explanatory