Develop Bugs

cant find any solution with 'media scanning"

hi2all
before post this thread i cheked all xda but anyone method did not help me
my problem is "scanning media files"
one day when i serfing inet my E975 has been rebooted
after load i got a first time boot start message
all data lost and phone ask me to set all setting from beginning
now i see alltime 'scanning media files'
I have tried the following: steps:
made hard resets - no effect
flashed using KDZ updater (E97510C_00, E97510a_00 E97510f_00) - no effect
used LGtool (selected recovery..inserted my IMEI and load) - no effect
and followed this http://forum.xda-developers.com/show....php?t=2010624
but problem haven't solved
always media scanning
cant try any ways like fleshing kernel, becose need fastboot mode
cant unlock fastboot, cos cant make root... anyone way to install root not work, cos no access to phone storage
someone told me i can try to do root with adb shell... but cant find how i can use this in my sutuation
I would be very thanksfull any help
i rly dont know what should i do next....

In the past I have a problem with media scanner message, always running in the background, although I had no problems about rebooting or soft-resets, it was only a message running in the background always. The way I solve it was to go into "almacenador de medios" (dont know in english, maybe something like "media store") in app manager, and then force stop, clean data and clean cache, reboot and after a first past again, all went ok. I suppose you continue with the message after reseting maybe because cache or dalvik cache is not clean.
Hope that help.
pr0_eMoTIoN said:
hi2all
before post this thread i cheked all xda but anyone method did not help me
my problem is "scanning media files"
one day when i serfing inet my E975 has been rebooted
after load i got a first time boot start message
all data lost and phone ask me to set all setting from beginning
now i see alltime 'scanning media files'
I have tried the following: steps:
made hard resets - no effect
flashed using KDZ updater (E97510C_00, E97510a_00 E97510f_00) - no effect
used LGtool (selected recovery..inserted my IMEI and load) - no effect
and followed this http://forum.xda-developers.com/show....php?t=2010624
but problem haven't solved
always media scanning
cant try any ways like fleshing kernel, becose need fastboot mode
cant unlock fastboot, cos cant make root... anyone way to install root not work, cos no access to phone storage
someone told me i can try to do root with adb shell... but cant find how i can use this in my sutuation
I would be very thanksfull any help
i rly dont know what should i do next....
Click to expand...
Click to collapse

have you tried the lg pc suite?go to lg's site and download it and the connect your phone to pc in "pc suite" mode.then from there you can do an update or press the "emergency firmware recovery" under device menu.This will propably recover your phone.

MafiaGR said:
have you tried the lg pc suite?go to lg's site and download it and the connect your phone to pc in "pc suite" mode.then from there you can do an update or press the "emergency firmware recovery" under device menu.This will propably recover your phone.
Click to expand...
Click to collapse
already tried this
but problem havnt solved after "emergency firmware recover"

anyone knows how i can made root without access rights to sd card?
ways like "frameroot.apk" and via bat file "currentroot.bat" - not worked (all those methods need access to sd card)
or maybe there are any commands on ADB to reset or fix sd card?
i'm rly sad with my problem....

what is the model of your phone and ROM?
did You try go back to stock rom with LGMobile Support Tool?
I have same problem but it occurs when I flash to E97510D ROM (my phone is F180K):
http://forum.xda-developers.com/showthread.php?t=2246867
when I want to fix it, I make emergency firmware recovery in LGMobile Support Tool (and factory reset after this).

Maybe your motherboard is giving up

no... every time I go back to stock ROM, its working fine

bihslk said:
Maybe your motherboard is giving up
Click to expand...
Click to collapse
i think this is rly...
cos i have tried already all ways...

[Guide]Unlocking Android Protection Code Without Reset Or Root

THIS METHOD WILL NOT WORK IN NEWER VERSIONS OF ANDROID
Click to expand...
Click to collapse
1.Please note that by using this method you can unlock phone without losing any data.
2.This must not be used for any illegal purpose.
3.I do not hold any responsibility of any phones bricked using this method(though it is tested)
.
.
Requirements
Links
1.Download Android Multi Tools- Click Here
2.Universal Adb Drivers - Click Here
Click to expand...
Click to collapse
.
.
Now lets begin
1.First unpack the tool.
2.Then install the adb driver.
3.Turn on your phone and connect it to pc via data cable.
4.Now press 1 to check if your device is connected properly.
5.Now if you have pin,password or face-lock please press 2.
6.If you have pattern lock then press 3.
7.Device will reboot and it will be unlocked.
8.If it still shows pattern,pin or password enter window simply simply give any to unlock.
Click to expand...
Click to collapse
.
.
Other action that can be done by this program are below
.
Choice detail
1.check device for check connection of device to pc.
4.reset gmail for reset gmail login after try many time wrong unlock
5.wipe data for reset all data to factory setting.
6.reboot for reboot device to normal mode or exit from adb shell.
7.check device on fastboot mode for check connection of device to on fastboot mode.
8.wipe data / cache on fastboot mode for erase user datat and cache on fastboot mode to resolve freeze,stuk on boot logo or slow down device. That is often found in the cpu spreadtrum sc6280/sc8810.
9.exit fastboot mode for reboot your pc or exit fastboot.
0.go to command promt for entering dos promt.you can use command in this soft folder and can return to the main program by type exit
s.software info for info cpu inside,firmware version and etc.
H.hardware info for determine the ic number of gsensor,touch screen,camera,wifi and more
Click to expand...
Click to collapse
.
.
.
thanks for reading this post
Written By
Pranto Roy
XDA
Click to expand...
Click to collapse

Links
1.download android multi tools- http://d-h.st/rCh
2. universal adb drivers - http://adbdriver.com/upload/AdbDriverInstaller.exe

prantoroy said:
Links
1.download android multi tools-
2. universal adb drivers -
Click to expand...
Click to collapse
thanks
my younger bro face this problem yesterday and today i got ans
will try and update

Jpjayesh said:
thanks
my younger bro face this problem yesterday and today i got ans
will try and update
Click to expand...
Click to collapse
Sure Please Update

Thnks
Sent from my HTC One X using xda app-developers app

chrisb906 said:
Thnks
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
hmm. . . gud
share it!!

Unfortunately, I was not at my work machine.
Pranto Roy said:
1.Please note that by using this method you can unlock phone without losing any data.
2.This must not be used for any illegal purpose.
3.I do not hold any responsibility of any phones bricked using this method(though it is tested)
.
.
.
.
.
.
.
.
.
Click to expand...
Click to collapse
Hello to everyone!
This description is very good, but unfortunately I can not help of mind. The Freetab 2099 tablet is set, the OSD, I forgot, offered through the recovery gmail account, but the machine is not connected to the Internet, and it can not be solved. The Windows XP felimeri the machine, but only shows an empty folder adb driver installation, and Total Commander, however does not see downloaded from the manufacturer's website drivers installed, but not working this solution, a multitool can not find device. Maybe a factory reset would solve the matter but has not yet been described find or install a new rom that is. Img extension of the manufacturer's side, but I do not know bekepcsolni debug mode on the machine, it does not allow the zárképrnyőről to move on.
If anyone knows a solution to my problem, thanks in advance.
Hello, Valer

Tiszaba said:
Hello to everyone!
This description is very good, but unfortunately I can not help of mind. The Freetab 2099 tablet is set, the OSD, I forgot, offered through the recovery gmail account, but the machine is not connected to the Internet, and it can not be solved. The Windows XP felimeri the machine, but only shows an empty folder adb driver installation, and Total Commander, however does not see downloaded from the manufacturer's website drivers installed, but not working this solution, a multitool can not find device. Maybe a factory reset would solve the matter but has not yet been described find or install a new rom that is. Img extension of the manufacturer's side, but I do not know bekepcsolni debug mode on the machine, it does not allow the zárképrnyőről to move on.
If anyone knows a solution to my problem, thanks in advance.
Hello, Valer
Click to expand...
Click to collapse
Seriously Man.
Didn't Understood A Word.
Give Details and Only Ask The Main Question

Pranto Roy said:
Seriously Man.
Didn't Understood A Word.
Give Details and Only Ask The Main Question
Click to expand...
Click to collapse
The "Freetab 2099" table host forgot the password and can not login. The Android Multi Tools does not recognize your computer, Windows can only see empty folders. How to factory reset the computer to do?

Tiszaba said:
The "Freetab 2099" table host forgot the password and can not login. The Android Multi Tools does not recognize your computer, Windows can only see empty folders. How to factory reset the computer to do?
Click to expand...
Click to collapse
If The Computer Doesn't Recognize It Install Drivers.
Without Identifying Its Not Possible.

Pranto Roy said:
If The Computer Doesn't Recognize It Install Drivers.
Without Identifying Its Not Possible.
Click to expand...
Click to collapse
Hello!
The Adb Driver Installer does not recognize the machine, so I installed the manufacturer's website for official drivers. Only one folder is empty, or whatever it may be copied, "The device is not responding or is not connected."

Tiszaba said:
Hello!
The Adb Driver Installer does not recognize the machine, so I installed the manufacturer's website for official drivers. Only one folder is empty, or whatever it may be copied, "The device is not responding or is not connected."
Click to expand...
Click to collapse
I'll Get The Drivers

ts, i tried to used the tool the the .exe recognize my device it shows the serial number but when i tried to unlock using otion 2 or 3 it doesn't work i got skk mobile a1 device it has somewhat like ios GUI

ghepier said:
ts, i tried to used the tool the the .exe recognize my device it shows the serial number but when i tried to unlock using otion 2 or 3 it doesn't work i got skk mobile a1 device it has somewhat like ios GUI
Click to expand...
Click to collapse
If It Recognized Ur Device It Will Work
And Please Add Details
Eg. What Error Message etc.

Hi there, i have tried to use the following software but it doesnt work
so basically I have a samsung G3 i9300T and I know the pattern code but i still want to try out.
firstly when i ran the Multi-tool, it doesn't recongized my phone. So i realized i have to turn on USB debugging in order to let the software to detect my phone.
So i have turned the usb debug mode on and it finally picks up my phone.
Press 1 and it has my serial number, good, good. Then I go to option 3 as you mentioned in order to unlock pattern lock.
It reboots, and the pattern lock is still sitting on screen. So i tried to swipe anywhere on the pattern lock but it doesnt allow me to go further unless i input the right code.
Now i am wondering what could went wrong?

Fossil_Sioux said:
Hi there, i have tried to use the following software but it doesnt work
so basically I have a samsung G3 i9300T and I know the pattern code but i still want to try out.
firstly when i ran the Multi-tool, it doesn't recongized my phone. So i realized i have to turn on USB debugging in order to let the software to detect my phone.
So i have turned the usb debug mode on and it finally picks up my phone.
Press 1 and it has my serial number, good, good. Then I go to option 3 as you mentioned in order to unlock pattern lock.
It reboots, and the pattern lock is still sitting on screen. So i tried to swipe anywhere on the pattern lock but it doesnt allow me to go further unless i input the right code.
Now i am wondering what could went wrong?
Click to expand...
Click to collapse
That Is The Exact Process
I'll test it On S3

Didn't work on Motorola XT901
Thanks for supplying such a tool, unfortunately I tried it and had the same result has Fossil_Sioux on a Motorola XT901. Phone is recognized and when I select option 2 it reboots, but the lock screen is still displayed. I enter in any random pin and it just prompts me to try again. Any suggestions?

thanks
thanks for your time in posting this information because i find it very helpful

Nice
Nice thread...thnx man.

Devill007 said:
Nice thread...thnx man.
Click to expand...
Click to collapse
Thanks

[HELP] Cannot connect to PC using usb cable.

Hello,
I have Lumia 930 with W10M ....yesterday,i deployed "root app" and "CustomPFD" .xaps to my device...to get Interop Unlock and Full FS Access,but i think i do something what i shouldnt do...
My probles is: when i connect my device to PC using same USB cable as yesterday an any other day....it just pop up messenge about slow charger,normalny its pop up if i wanna use cable to move items and stuff from/to my device...but now i just cannot connect my L930 to PC....it just charges my phone...can u guys please tell me how to solve this problem??

It happened to me yesterday. The issue is activating full MTP access. It doesen't work properly. It has a slim chance for your pc to detect the system files. I recommend you use customPDF registry editor to revert the changes (search this forum). Or factory reset will do, but it will be a hassle setting up your phone all over again.

soad26 said:
It happened to me yesterday. The issue is activating full MTP access. It doesen't work properly. It has a slim chance for your pc to detect the system files. I recommend you use customPDF registry editor to revert the changes (search this forum). Or factory reset will do, but it will be a hassle setting up your phone all over again.
Click to expand...
Click to collapse
I searched....and tryed that "enable and disable" method in CustomPFD...i seriously dont wanna factory reset my phone...ohhh....that so bad
EDIT: Oh.nothing works....i think i need to do factory reset...when its done ill post next EDIT if it works

You have to do it manually. I found this. This is the exact process i did with cPDF.
navigate this path :
HKLM\Software\Microsoft\MTP
edit Data Store value to c:\Data\Users\Public and hit Write button .
that's it
Unplug/replug your phon until the system detects it.

soad26 said:
You have to do it manually. I found this. This is the exact process i did with cPDF.
navigate this path :
HKLM\Software\Microsoft\MTP
edit Data Store value to c:\Data\Users\Public and hit Write button .
that's it
Unplug/replug your phon until the system detects it.
Click to expand...
Click to collapse
A did this already but it didnt worked...is already has "c:\Data\Users\Public " value....

Sharp852 said:
A did this already but it didnt worked...is already has "c:\Data\Users\Public " value....
Click to expand...
Click to collapse
Did you restart? And press write like 10x. Unplug your phone, wait. If it did not work, just unplug/replug until your pc detects it.

soad26 said:
Did you restart? And press write like 10x. Unplug your phone, wait. If it did not work, just unplug/replug until your pc detects it.
Click to expand...
Click to collapse
I did factory reset...now it works like a charm...but while formatting,i rimebered that i forgot to backup my photos.... ...so i dont have my photos now....

Ouch... I feel you brother. Just do interop unlock, i dont find full mtp access that really useful.

soad26 said:
Ouch... I feel you brother. Just do interop unlock, i dont find full mtp access that really useful.[/QUOTE
Okay,at least i have some of photos on Onedrive form WP8 .....at least something....okay...so i dont need Full MTP access really.....so just interop unlock from "root tool"...and what to choose? just Interop,Interop+Capability or Win10 Capabilities? and...ive seen on 1 threat what there is option to bring on 5 Quick Access tiles...how to do that??
Click to expand...
Click to collapse

same on Lumia 535
Sharp852 said:
Hello,
I have Lumia 930 with W10M ....yesterday,i deployed "root app" and "CustomPFD" .xaps to my device...to get Interop Unlock and Full FS Access,but i think i do something what i shouldnt do...
My probles is: when i connect my device to PC using same USB cable as yesterday an any other day....it just pop up messenge about slow charger,normalny its pop up if i wanna use cable to move items and stuff from/to my device...but now i just cannot connect my L930 to PC....it just charges my phone...can u guys please tell me how to solve this problem??
Click to expand...
Click to collapse
same problem

Having this issue on my Lumia 830. I did the registry changes (tried combo of upper/lowercase for the registry key) and nothing worked.
Eventually, after trying boot mode (the ! window) I am locked out of all my jailbreak apps. I suspect the boot loader (holding the volume key down until the ! screen loads) locked my capabilities.
Oh well. Windows Recovery Tool says there's new Firmware for the 830 (much newer than what's on my phone). Yet another full restore is in the works for me. Hope anyone reading this doesn't make the same mistake I did!

One M9 encrypted and no recovery mode

HTC One M9
Android 6
Bootloader Locked
S=On
USB debugging disable
today I found my phone stock on decryption screen! I did not enable encryption mode. now my phone says: your phone is encrypted. to decrypt your phone, enter your Screen lock password.
it does not matter what number I enter! every number I enter, it says: Decryption unsuccessful. the password you entered is correct, but unfortunately, your data is corrupt. to resume using your phone, you need to perform a factory reset. When you set up your phone after the reset, you'll have an opportunity to restore any data that was backed up to your Google Account.
But nothing happened when I press the "reset phone" button. I waited 4 hours but it remains on a window named "Factory data reset, Rebooting..." but it can not proceed to reboot.
when I power off and go to bootloader, I can not go to recovery mode. on recovery mode, there is only a triangle with a red exclamation mark.
I download a stock ROM so I can flash it to my phone from download mode, but at the beginning of flashing process it comes with this error
12 RU_ZIP_ERROR
please help me

sjmahmoudi said:
HTC One M9
Android 6
Bootloader Locked
S=On
USB debugging disable
today I found my phone stock on decryption screen! I did not enable encryption mode. now my phone says: your phone is encrypted. to decrypt your phone, enter your Screen lock password.
it does not matter what number I enter! every number I enter, it says: Decryption unsuccessful. the password you entered is correct, but unfortunately, your data is corrupt. to resume using your phone, you need to perform a factory reset. When you set up your phone after the reset, you'll have an opportunity to restore any data that was backed up to your Google Account.
But nothing happened when I press the "reset phone" button. I waited 4 hours but it remains on a window named "Factory data reset, Rebooting..." but it can not proceed to reboot.
when I power off and go to bootloader, I can not go to recovery mode. on recovery mode, there is only a triangle with a red exclamation mark.
I download a stock ROM so I can flash it to my phone from download mode, but at the beginning of flashing process it comes with this error
12 RU_ZIP_ERROR
please help me
Click to expand...
Click to collapse
This problem has been posted from time to time by other users - it often indicates a corrupt chip in the motherboard.
Depending on your SKU and whether or not there really is a hardware issue or not, it may be possible to apply a RUU, which would effectively restore your phone to factory state (though it will wipe your internal memory).
Please post your OS version, which will help us determine your phone's SKU.

If you put the phone in download mode and plug it into a pc then run fastboot.exe with the cli command 'fastboot getvar all' you will get a lot of important information.
If you are absolutely sure your phone has never been modified and it shows on the fastboot output "status modified" then you can assume your phone has hardbricked from a faulty nand. Only HTC can fix it in the case.
Beamed in by telepathy.

computerslayer said:
this problem has been posted from time to time by other users - it often indicates a corrupt chip in the motherboard.
Depending on your sku and whether or not there really is a hardware issue or not, it may be possible to apply a ruu, which would effectively restore your phone to factory state (though it will wipe your internal memory).
Please post your os version, which will help us determine your phone's sku.
Click to expand...
Click to collapse
os: 3.35.401.32

shivadow said:
If you put the phone in download mode and plug it into a pc then run fastboot.exe with the cli command 'fastboot getvar all' you will get a lot of important information.
If you are absolutely sure your phone has never been modified and it shows on the fastboot output "status modified" then you can assume your phone has hardbricked from a faulty nand. Only HTC can fix it in the case.
Beamed in by telepathy.
Click to expand...
Click to collapse
I rooted this phone when I first bought it. but 4 months ago I unroot it so I could update it's android to marshmallow. after unrooting, i receive the android update and everything was as normal as a fresh unrooted phone.
I was able to go to download mode when first my phone faced this problem. but now the download mode is not available
it says: failed to boot to download mode
press volume up or down to back to menu
this build is for
development purposes only
do not distribute outside of HTC
without HTC's written permission.
Failure to comply may
lead to legal action.

computerslayer said:
This problem has been posted from time to time by other users - it often indicates a corrupt chip in the motherboard.
Depending on your SKU and whether or not there really is a hardware issue or not, it may be possible to apply an RUU, which would effectively restore your phone to factory state (though it will wipe your internal memory).
Please post your OS version, which will help us determine your phone's SKU.
Click to expand...
Click to collapse
I took my m9 to HTC service center. he said that main chip must be replaced. after replacing the chip, he said that I need a dump.bin file and I do not have it. now after 3 months, my dear m9 is still on the service center . I search all over the net for the dump.bin file but there is nothing at all.
I do not even know what the hell is the dump.bin file. he said that your phone can boot but it will not have antenna without relevant dump file. I'm confused please help me
my phone model ID: 0PJA100

Did you give your phone to an official HTC service center? HTC should have the needed file so the fact that you should provide it to the service center confuses me a bit.
It's impossible to get that file (from a working phone) without a JTAG device and I doubt that many M9 owners have one since they're quite expensive. Sorry for the bad news.

Question Nokia g11 Plus, pincode locked screen.

So, I'm ashamed to admit but when setting up the phone for the first time, I set a pin password that I don't remember, I didn't even log into my google account so now the phone just asks for a pin.
Things I've tried:
1: Flash StockROM = I searched the whole internet and the only thing I found was an OTA update
2: Hard Reset from Recovery = The recovery mode in this phone has only 3 poor options, turn off, restart and fastboot
Well gentlemen? brain storm.

HeartOnBlaze said:
So, I'm ashamed to admit but when setting up the phone for the first time, I set a pin password that I don't remember, I didn't even log into my google account so now the phone just asks for a pin.
Things I've tried:
1: Flash StockROM = I searched the whole internet and the only thing I found was an OTA update
2: Hard Reset from Recovery = The recovery mode in this phone has only 3 poor options, turn off, restart and fastboot
Well gentlemen? brain storm.
Click to expand...
Click to collapse
Use Fastboot to reset the phone using TFM tool.

mvikrant97 said:
Use Fastboot to reset the phone using TFM tool.
Click to expand...
Click to collapse
Which option?
I remind you that no google account is connected to the phone, only a pin code

HeartOnBlaze said:
Which option?
I remind you that no google account is connected to the phone, only a pin code
Click to expand...
Click to collapse
You will have to try with each option.

I have the same problem, but I can't find a source for the TFM Tool.
Could you help?

wuschelpopuscheldododoasf said:
I have the same problem, but I can't find a source for the TFM Tool.
Could you help?
Click to expand...
Click to collapse
Here is the link to download it
TFT Unlock Tool For FRP Reset and Flashing for your Qualcomm and Mediatek Devices. Download now!
TFT Unlock Tool For FRP and Flashing your Nokia G10 and G20 devices. DOWNLOAD TOOL - GOOGLE DRIVE LINK 1. Extract the zip file and double click to begin installation. 2. Please enter the password in all caps as TFT and installation will begin...
forum.xda-developers.com

Thanks a lot. I already tried that software, but it doesn't recognize my Nokia G11 Plus, although it's in "fastbootd"
or "recovery" mode. There is no option to factory reset the device

wuschelpopuscheldododoasf said:
Thanks a lot. I already tried that software, but it doesn't recognize my Nokia G11 Plus, although it's in "fastbootd"
or "recovery" mode. There is no option to factory reset the device
Click to expand...
Click to collapse
Please PM me on XDA

wuschelpopuscheldododoasf said:
Thanks a lot. I already tried that software, but it doesn't recognize my Nokia G11 Plus, although it's in "fastbootd"
or "recovery" mode. There is no option to factory reset the device
Click to expand...
Click to collapse
The only reliable way is to either send to Nokia Care or avail some remote service. These random tools aren't going to assist you in resetting the devices.