READ ALL BEFORE ANYTHING!
ATTENTION
Code:
/*
I'm not (yet) a developer , I'm taking effort to put more choices of kernel for our great community.
This kernel is tweaked for best balance possible, if you want a feature quote me and i will see what i can do,
I will build this kernel when possible on my free time and because of it is a nightly and I will use this thread as a worklog too.
Thank you for using this kernel.
*/
Disclaimer
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Adapt, improve and evolve!
Info:
Guys I created this kernel to Moto G 2013 (Falcon/Peregrine) and Moto G 2014 (Titan/Thea) in other words MSM8226 Motorola SoC baseds to learn, adapt some "unstable and unsafe" things as well to give a new life to my device, the plan is to support all Android versions avaliable for our device, I plan to do a better kernel with time and help of the comunity. This kernel is a nightly I will do it when I have a freetime or LineageOS update their sources or I add new features, it aims to be a rich feature kernel and a "perfection balance" between battery life and performance, this can be a UNSTABLE kernel, my routine will be build,upload and test, so stay tuned! I am open to suggestions. This is a kernel that don't work out-of-the-box the objetive of this kernel is give power to the user.
This kernel DO NOT WORK WITH STOCK MOTOROLA/GOOGLE PLAY EDITION ROM or IDCRISIS or AOSPARADOX.
On post 1:
#1 - Features and installation instructions
#2 - Downloads and kernel Source
#3 - Buglist and to do's
On post 2:
#1 - Changelog
Features (By now and latest one):
Based on 3.4.113 LTS Linux kernel and latest LOS/AOSP/CM/Motorola sources
Kexec hardboot patch (MultiROM support)
Governors: Interactive,Ondemand,Performance,Userspace,Conservative,Powersave
Hotplugs: AutoSMP and Alucard Hotplug
Overclocks and Underclocks (Attention this can be dangerous to your device! you have been warned!):
Overclocked CPU (up to 1.6Ghz),Overclocked GPU (up to 600Mhz) Overclocked RAM and Overclocked Slimbus for better audio
Intellithermal v2 to protect our device from heating
Sound: High performance Headset,Low latency playback Support,24 bits Playback Support,Enabled additional Moto G Exclusive Audio Channels TPA-a6165a2
Screen: DT2W and S2W/S2S, KCAL
GPU:Simple GPU Algorithm and AdrenoIdler
Misc: Init.d support, Fsync on/off, ARCH_Power, Gentle Fair Sleepers, Toggle for some wakelocks, Stereo Call Recording Support, Reclaim RAM from loggers, Powersuspend, State Notifier .
For full features list check my github.
Compiled with Arch Linux up-to-date and UBER Toolchain 4.9 and optimize flags[/COLOR]
Bootlogos
PREVIEWS ONLY CHECK DOWNLOADS SECTION FOR LINKS
Created by me and the others two by @Mattwmaster58:
Silver
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Blue
Red
Downloads
(Folder on AFH) (Please DO NOT MIRROR, if one is down just post in the thread or pm me and i will repair!):
Cyanogenmod/AOSP for Falcon:
CM14.1 (UNIFIED WITH CM13 BY NOW) - CM14.1
CM12.1 - CM12.1
CM11 - NOT YET
Cyanogenmod/AOSP for Peregrine:
CM14.1 (UNIFIED WITH CM13 BY NOW) - CM14.1
CM12.1 - CM12.1
CM11 - NOT YET
Cyanogenmod/AOSP for Titan/Thean (Same defconfig):
CM14.1 (UNIFIED WITH CM13 BY NOW) - CM14.1
CM12.1 - CM12.1
CM11 - NOT YET
NOTE:ALWAYS CHECK LAST PAGES TO SEE WHAT IS GOING ON!!!
LSpeed Profiles (OLD! LSpeed envolved too fast!) - Balance
Bootlogos: ZER0 Byte Bootlogo
Old releases of ZER0 and ZER0 Byte (Reborn) Kernel : AFH
Mirror: Github mirror and how to download
How to install
If you're on other kernel please at least DIRTY FLASH you ROM, thanks.
The kernel:
By recovery:
Using TWRP (Please use the latest one)
1. Put the zip at /sdcard > Reboot to recovery > Install > Chose the kernel zip > Confirm to flash > (optional) Wipe caches > Reboot.
or
By app:
2. Flash it using Flashify or similar app from Playstore.
The kernel scripts backup your current boot.img so if you want to restore just use Flashify or TWRP.
The Bootlogo:
Using TWRP (Please use the latest one)
1. Reboot to recovery > Install > Chose the bootlogo zip > Confirm to flash > Reboot and enjoy.
2. Flash it using Flashify or similar app from Playstore.
3. Extract the zip and on mfastboot (or just fastboot) enter this command: fastboot flash logo logo.bin
Recommendations/Tweaking
Gov Tuner a mod to tune govs based on profiles for better battery life, better performance, or a balance., I have added a lot of sound patchs but A.R.I.S.E. will blow your mind! so if you want a better sound on your Moto G I suggest you A.R.I.S.E the best one in my opinion or just Viper+Dolby. And the best of the best tweaks app LSpeed just download and select a profile from main screen and fell it! or tune it by yourself!
To tweak use Kernel Adiutor from Playstore (or XDA Link), the Kernel Adiutor-Mod (fork with more experimental features) at XDA or Synapse You will need this zip and download Synapse app from Playstore.
Info about tweaking kernel The best guide to it!
Better RAM management for FALCON/PEREGRINE/TITAN/THEA thanks to @Pupet_Master
-Download "Kernel Auditor" from the "Play Store" and open it
-Once inside, Swipe from left to right to show the side menu.
-Tap on "Low Memory Killer"
-Change to these custom settings:
Code:
Foreground Applications: 29mb
Visible applications: 61mb
Secondary Server: 157mb
Hidden Applications 227mb
Content Providers: 87mb
Empty Applications 191mb
-Swipe from left to right again and tap at the option "Virtual Memory"
-Change those settings from there:
Code:
dirty_ratio: 20
dirty_background_ratio: 5
dirty_expire_centisecs: 100
dirty_writeback_centisecs: 300
min_free_kbytes: 4096
oom_kill_allocating_task: 1
overcommit_ratio: 100
swappiness: 100
vsf_cache_pressure: 53
laptop_mode: 0
extra_free_kbytes: 24576
Z-RAM Disksize: 470mb
-Swipe from left to right again and tap at the "Profile" section
-Click at the "+" button and save the current settings on a new profile
-Holdon the new profile and choose the option "apply on boot"[/QUOTE]
This kernel does not ships with a default config, so here it is how to config (an example) a profile for battery/balance/performance:
Battery
Code:
On CPU
CPU Gov - Interactive
Max freq. - 1190Mhz or 1094Mhz
Multicore power save - Aggressive
Alucard Hotplug - ON
On GPU
GPU max freq. - 450Mhz or 320Mhz (if dont play use 320Mhz)
GPU Gov - simple_ondemand or msm_adreno_tz with tweaked adreno idler
On I/O Scheduler
Scheduler - ROW or SIO
-
Balance
Code:
On CPU
CPU Gov - Interactive
Max freq. - 1190Mhz
Multicore power save - Enabled
AutoSMP - ON
On GPU
GPU max freq. - 450Mhz
GPU Gov - msm-adreno-tz
On I/O Scheduler
Scheduler - ROW or ZEN
-
Performance
Code:
On CPU
CPU Gov - Interactive
Max freq. - 1593Mhz
Multicore power save - Disabled
AutoSMP - ON
On GPU
GPU max freq. - 600Mhz
GPU Gov - msm-adreno-tz
On I/O Scheduler
Scheduler - ZEN
Note about some features
Display types WORKING with DT2W/S2S/S2W:
mdss_dsi_mot_inx_720p_video_v0 (TITAN/THEA)
mdss_dsi_mot_cmi_720p_video_v2 (FALCON/PEREGRINE)
Display types NOT WORKING with DT2W/S2S/S2W:
mdss_dsi_mot_jdi_720p_video_v1 (TITAN/THEA)
mdss_dsi_mot_jdi_720p_video_v0 (TITAN/THEA)
mdss_dsi_mot_lgd_720p_video_v0 (FALCON/PEREGRINE)
If you don't have a working DT2W/S2S/S2W or don't like it you can disable it and/or use AcDisplay app or Anbient Display of your ROM instead.
To check which display type you have by going into terminal and type:
su
cat /proc/cmdline
Bugs
None by now, if you encounter one please make a post in this thread with steps to reproduce and if possible a LOGCAT and DMESG. A simple how to help me debug.
To do
Undervolt and Userspace Voltage Controller
OC of 1.8Ghz
More Hotplugs
More Govs
More I/O's (SIOplus,FIFO)
Added all features to all variants
Vibrator Intensity Control
Ram Underclock
Sched & Mutex Tweaks
Stock and GPE variants
WQ_POWER_EFFICIENT
LZO Compression image (Fast boot)
DOLBY_DAP dependency fix
Frandom
Filesystems support:
NTFS Support / EXT 2/3/4 support / F2FS (Most roms only support it at /data)
Optimized ARM RWSEM algorithm
Silence some logs
NEON in kernel mode
Misc Crypt tweaks
LMK tweaks and adaptive
More Security Patchs
Yankactive (Cause reboot at the moment),Yankdemand,Smartmax,Lionhert,Impulse,DanceDance,Bioshock
I/O's: ROW,NOOP,Deadline,CFQ,FIOPS,BFQ,SIO,VR,ZEN
All avaliable TCPs congestions on Android
How to git and build
Setting up and building
Basics of GIT
- How to build my kernel:
Code:
export ARCH=arm
export SUBARCH=arm
export CROSS_COMPILE=/path/to/toolchain/bin/arm-eabi-
make mrproper (cleans config files)
make clean (cleans already builded files)
make falcon_defconfig (or you device_defconfig)
make menuconfig (if you want to tweak the config)
make (I use this too -o2 -j4 CONFIG_DEBUG_SECTION_MISMATCH=y CONFIG_NO_ERROR_ON_MISMATCH=y)
How to cherry pick commits
Basically to cherry pick a commit you have to have it source and branch, this is a simple how to do it
First of all you need to set your upstream since it is a fork of CM/LOS or STOCK source:
Code:
git remote add upstream linkingithub.git
For example
Code:
git remote add upstream https://github.com/CyanogenMod/android_kernel_motorola_msm8226.git
so if you want to cherry pick a commit from me
Code:
git remote add bryanbytez mysourcelink.git
and after that you need to have my source locally but stay calm this wont mess you source
Code:
git fetch -all
To merge upstream changes (From CM/LOS or Motorola)
Code:
git merge upstream/cm-13.0
This will merge upstream cm branch cm-13.0 in your source code.
Misc help:
http://forum.xda-developers.com/showthread.php?t=2319018 (about boot.img, ramdisk and others)
https://stackoverflow.com/questions/2816715/branch-from-a-previous-commit-using-git (Unlike me you can just revert or create another branch based on the commit and not delete the whole source code )
https://stackoverflow.com/questions/4410091/github-import-upstream-branch-into-fork (Import a upstream branch on your fork)
And to revert a git: git revert sha1, example git revert eab5c8fef098548f0f00085196bbf40f41bf8ba1
Source/Credits
If you want to post this on your site or other forum it's okay just post a link to this thread too and the correct credits and if you can, pm me with link so i can see it too, thanks.
The GNU General Public License is a free, copyleft license for software and other kinds of works.
The GPL permits use, share, study and modify.
But this does not mean you should not give the deserved credit to the previous author.
So if you use my source code under GPL you must share with GPL too and quote me in the credits.
CM/LOS/AOSP Based Source
Stock/GPE Based Source
Thanks to:
GOD
The Real Dev's:
Motorola/Lenovo
LineageOS/CyanogenMod/AOSP/CAF Teams
A special thank you to @Kamin4ri to be answering questions from a noob
@hurtsky @pinkflozd @zakee94 @TeamMex (not a team ) @RenderBroken @alin.p @Flashhhh @Shivam Kuchhal @RolanDroid @attack11 @DC07 @frap129 @-decipher- @bedalus @MetalPhoenix45 @srisurya95 @para94 @chijure @Aayushya @neonkat and @faux123 for inspiration and commits (i guess that everyone that i pick a single commit is here... since i don't know yet to pick commits (picking commits automatically add the credits) a big thanks to all !)
@kwoktopus, for the tutorial how to build
And you the user!
If I forget someone please contact me and I will add here! [/FONT]
XDA:DevDB Information
[Kernel][GPL][K-N][Titan][UBER TC]ZER0 Byte Kernel[Nightlys][CM/AOSP], Kernel for the Moto G 2014
Contributors
BryanByteZ
Source Code: https://github.com/BryanByteZero/android_kernel_motorola_msm8226
Kernel Special Features: OC/UC/DT2W/S2W/S2S/Sound Patchs and a lot more, check it!
Version Information
Status: Nightly
Current Stable Version: R3
Stable Release Date: 2017-02-22
Current Beta Version: R4
Beta Release Date: 2017-04-29
Created 2017-04-30
Last Updated 2017-05-01
Changelogs for CM/LOS/AOSP K/L/M/N
Changelogs for CM/AOSP K/L/M/N:
For Falcon and Peregrine
19/11/2016
No more MPDecision and CM PowerHAL
DT2W and S2W/S2S
Optimization Flags
Overclock and Underclock
Alucard Hotplug
AutoSMP Hotplug
Faux Sound 3.5
KCAL v2
High performance and low latency audio headset
KEXEC Hardboot patch
04/02/2017
Up-to-date with LOS source and Linux (now it's 3.4.113 the LTS version)
Intelliplug, AutoSMP and Alucard Hotplugs
Intellithermal
MSM-Limiter (you will need KernelAdiutor-MOD to use this feature)
Toggles for some wakelocks
ARCH_power
Gentle fair sleepers
Stereo call recording support
Reclaim RAM from loggers
Dynamic management of dirty page writebacks, expire and cache pressure
Some GPU patchs
SIO,VR,ZEN and Tripndroid I/O's
Powersuspend, LCD notify and state notifier
Dynamic FSYNC
CPU, GPU and RAM overclock
Simple GPU algorithm and AdrenoIdler
Enhanced audio with Faux Sound and low latency drivers and high performance mode
KCAL
KEXEC Hardboot patch
DT2W/S2S/S2W
Make optimizations
Powered by UBER STOCK Toolchain 4
22/04/2017
LATEST SOURCES
CPU OC/UC
GPU OC/UC
CPU boost
KCAL
faux Sound
High perf headset mode
OC RAM and slimbus
Intellithermal
Simple GPU Algorithm and AdrenoIdler
State notifier and Powersuspend
Alucard and AutoSMP hotplugs
Stereo call recording
Custom I/O's
Stock GOVS
KEXEC Hardboot patch
wakelock blocks
Fsync on/off
Power efficient workqueue
29/4/2017
DT2W/S2S/S2W
Bugs:
None by now,if you encounter one please make a post in this thread with steps to reproduce and if possible a LOGCAT and DMESG.
Reserved
Reserved
DT2W doesn't work, my phone is compatibile as in older kernels it worked
Just installed it on Titan, Ressurrection Remix. 1.6 ghz !!!
Zenzfum000 said:
DT2W doesn't work, my phone is compatibile as in older kernels it worked
Click to expand...
Click to collapse
Did you enabled on KA? It give some error? Which kernel DT2W worked? Which is you display? check note section in OP, please. I used the same "formula" for falcon,peregrine and titan/thea but maybe this last need some special atention.
Thanks.
BryanByteZ said:
Did you enabled on KA? It give some error? Which kernel DT2W worked? Which is you display? check note section in OP, please. I used the same "formula" for falcon,peregrine and titan/thea but maybe this last need some special atention.
Thanks.
Click to expand...
Click to collapse
I've used ex kernel manager, i don't think the problem is on the software side. In marshmallow kernel dt2w worked, is not a fault of yours, i think is nougat
In devolution kernel is not working too
When i try to unlock screen i had a soft reboot
Zenzfum000 said:
I've used ex kernel manager, i don't think the problem is on the software side. In marshmallow kernel dt2w worked, is not a fault of yours, i think is nougat
In devolution kernel is not working too
When i try to unlock screen i had a soft reboot
Click to expand...
Click to collapse
Well sound like that is not supported, in MM you used evolution kernel? Can you grab the output of cat /proc/cmdline in terminal? Thanks!
Sent from my Xiaomi Redmi 4A using XDA Labs
BryanByteZ said:
Well sound like that is not supported, in MM you used evolution kernel? Can you grab the output of cat /proc/cmdline in terminal? Thanks!
Click to expand...
Click to collapse
I'm not a beginner, i know what i'm saying
Dt2w has problems on nougat kernels
Sent from my Moto G 2014 using XDA Labs
Zenzfum000 said:
I'm not a beginner, i know what i'm saying
Dt2w has problems on nougat kernels
Click to expand...
Click to collapse
I'm just asking because I don't own a Titan/Thea/Peregrine but since it have the same SoC same features should work in all.
BTW you can test in a MM?
Sent from my Xiaomi Redmi 4A using XDA Labs
BryanByteZ said:
I'm just asking because I don't own a Titan/Thea/Peregrine but since it have the same SoC same features should work in all.
BTW you can test in a MM?
Click to expand...
Click to collapse
Not now but i think it will don't work on mm too
Sent from my Moto G 2014 using XDA Labs
Zenzfum000 said:
Not now but i think it will don't work on mm too
Click to expand...
Click to collapse
So basically any kernel that have DT2W is not working on N right?
Can you grab me a dmsg and lastkmsg? Maybe I can debug it.
Thanks!
Sent from my Xiaomi Redmi 4A using XDA Labs
BryanByteZ said:
So basically any kernel that have DT2W is not working on N right?
Can you grab me a dmsg and lastkmsg? Maybe I can debug it.
Thanks!
Click to expand...
Click to collapse
Ok, i'll try
Sent from my Moto G 2014 using XDA Labs
Here you are the logs @BryanByteZ
Zenzfum000 said:
Here you are the logs @BryanByteZ
Click to expand...
Click to collapse
Can you say something about the general performance and stability? Does CPU overclocking work without overheating or other issues?
Sent from my Moto G 2014 using XDA Labs
Here You are thanks for working on titan too!
I'm on RR MM at the moment, when trying dt2w/s2w my phone reboots.
Wolfcity said:
Can you say something about the general performance and stability? Does CPU overclocking work without overheating or other issues?
Click to expand...
Click to collapse
General performance is great, i'm using interactive with alucard at maximum 1401mhz, never faced overheating issues :good:
Sent from my Moto G 2014 using XDA Labs
Does OC actually work?
Other developers have tried it before, and realized it was a placebo soon after.
Kernel working great!
But one thing, if I select Dt2w/S2w from kernel auditor.. After that, the device got reboot automatically & settings are changed itself to default settings n kernel auditor..
So pls, implement/improve/repair Dt2w features..
Sent from my Moto G 2014 using Tapatalk
I use Conservative governor, no heating problems.
DT2W crashes/reboots device. I would not bother with DT2W, it just drains battery.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
EXPERIENCE HALOGEN | EXPERIENCE AWESOMENESS
For Changelogs please see POST #2.
For FAQ please see POST #3.
DISCLAIMER :-
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will simply laugh at you.
*/
NOTE :-This kernel is ONLY meant for AOSP/CM ROMs.
This IS NOT MEANT for STOCK ROMs.
Upto R14 Kernel supports Lollipop.
From R15 onwards Kernel supports ONLY Marshmallow.
From R18 onwards Kernel supports Doze + Marshmallow.
From R30 onwards Kernel supports ONLY Nougat.
WHAT IS THIS KERNEL ?This kernel is built especially for these 3 things :- 1. Audio, 2. Performance, 3. Battery Life.
The main aim of halogen is to bring performance without compromising stability & battery. And that is what I intend to do. Go ahead and try this kernel, and it should make your device much better.
FEATURES :-(features of ONLY the latest version is mentioned)
Based on Linux Kernel 3.4.42
Updated with the latest CM14.1 sources
Built with UBER Toolchain GCC-4.9
Any Kernel 2 script used
Kexc Hardboot patched
Built with optimization flags for enhanced performance
GPU OC to 533 MHz & UC to 100 MHz
Disabled PowerHal log spam (thanks to @attack11)
Faux Sound Control v3.5
Headset in high performance profile
Slimbus overclocking for superior audio quality
Enabled CPU boost
Add Frandom
Power effecient work queues enabled by default
Reclaim RAM from loggers
Disable gentle_fair_sleepers for increased I/O
Enable advanced unaligned_access
Enable arch_power
Use power efficient workqueues for bam_dmux
Optimize square root algorithm
intelliactive, intellidemand, zzmoove cpu governors
intelliplug v4.0 cpu hotplug
enabled advanced tcp congestions
Ability to use your device as USB Keyboard / Mouse
Stereo call record support
psx2usb
KCAL v2 by Savoca
Dynamic FSync
Added optimized square root algorithm
Added optimized ARM_RWSEM algorithm
NEON kernel mode
Ex-FAT support
LONG TERM SUPPORT :-
This kernel will be supported for a long time with updates directly streamed from CM kernel sources i . e . as long as CM keeps publishing updates to its base, this kernel will also be updated.
DOWNLOADS :-(do not mirror my links)[ Latest Version ][ Older Versions ]
INSTALLATION INSTRUCTIONS :-
Reboot into recovery.
Make a nandroid BackUp.
Select Install zip from SD Card.
Select the Downloaded zip.
Then Reboot to System.
Leave your phone untouched for 2-3 minutes after first reboot to allow the kernel to spread it's wings.
RECOMMENDED APPS FOR KERNEL TWEAKING :-
Kernel Adiutor
Faux123 Kernel Enhancement Pro
I do not support any other apps.
CREDITS:-~~Google
~~Motorola for kernel sources
~~Flashhhh
~~hurtsky
~~Luk & Luca -for various fixes
~~Thecrazyskull, DC07 -for cherry-picks
~~Faux123
~~Savoca
~~YoshiShaPow
~~attack11
~~many more.......
Please don't start a war here if I forgot to mention someone. PM me and I will add him / her.
XDA:DevDB Information
HalogenKernel, Kernel for the Moto G 2014
Contributors
zakee94
Source Code: https://github.com/zakee94/halogen_kernel/
Kernel Special Features: Faux sound, Kexec, KCAL, Intelliplug
Version Information
Status: Stable
Current Stable Version: R31
Stable Release Date: 2017-01-07
Created 2015-06-11
Last Updated 2017-01-07
Changelog
CHANGELOG(simplified changelog, for full changelog please look at my GitHub commits.)
R31 --> 07/01/2017
Merged CM Updates
For older changelogs :-
R30 --> 30/10/2016
First Nougat release
For changes please see post #670
R29 --> 24/07/2016
Merged CM Updates
R28 --> 08/06/2016
Merged CM Updates
AROMA installer
Added tripndroid IO Scheduler
CPU optimizations
ARM tweaks and updates
R27 --> 12/05/2016
Merged CM Updates
R26 --> 10/04/2016
Merged CM Updates
R25 --> 16/03/2016
Merged CM Updates
R24 --> 18/02/2016
Reverted the following :-
CPU OC/UC - 1593/96 MHz
CPU UV
LMK tweaks + Agressive LMK mode
Following CPU govs --> lionheart, dancedance, bioshock, alucard
Following Hotplugs --> Mako, Auto-smp
Added the following -->
Merged CM Updates
Built with UBER Toolchain GCC-6.0
R23 --> 19/01/2016
Merged CM Updates
Overhauled boot script
R22 --> 11/01/2016
Rebased kernel on android 6.0.1_r10
Rebuilt kernel from scratch
Merged a lot of CM updates
Added futex updates
Cpu UV added (hardcoded values)
Added 2 new hotplugs :- Auto-smp & Mako
Removed Alucard Hotplug
Overhauled updater script
R21 --> 30/12/2015
Add CPU OC/UC - 1593/96 MHz
Adapt cpu_govs for CPU OC/UC
Merged CM Updates
R20 --> 29/12/2015
Merged CM Updates
R19 --> 23/12/2015
Added 3 new cpu_govs: Lionheart, DanceDance & Bioshock
Enabled CPU boost
Added optimized ARM RWSEM algorithm
ARM updates merged directly from CAF (See Git)
Mutex updates (See Git)
LMK updates (See Git)
Add agressive LMK
Build using -O3 & -graphite flags for enhanced performance
Cortex-A7 optimizations in Makefile
block: Disable add_random
Implemented LoUIS cache
Made bioshock as default gov. in boot script
Many other optimizations (smp, rcu, vfs, vfp, etc... See Git)
R18 --> 20/12/2015
Merged latest CM Updates (support for Doze)
R17 --> 17/12/2015
Merged latest CM Updates
Made interactive as default gov. in boot script
R16 --> 03/12/2015
Fixed FM Radio not working
Fixed Section Mismatches
Enabled pipe flag
R15 --> 27/11/2015
Build Kernel from scratch based on cm-13.0 kernel base
Compiled using Hyper-Linaro 5.1 Toolchain
Kernel version brought down to 3.4.42 temporarily
Revert SE Linux force permissive
Revert use Modulo sched & strict alias flags
Enabled Simple GPU Algorithm
R14 --> 11/10/2015
Merged latest updates
Updated kernel to v3.4.109
Updated bfq to v7r8
R13 --> 6/09/2015
Brought back the following :-
SE Linux tweaks
msm:kgsl tweaks
Enable unaligned_access
DOLBY dap dependency fix
Removed the following :-
Simple GPU Algorithm
New features :-
Update with latest CM sources
Implement Adreno Idler
R12 --> 26/08/2015
Removed the following :-
CPU UC to 96MHz
SE Linux tweaks
USB Fast Charge v2
Added optimized ARM_RWSEM algorithm
msm:kgsl & wcnss tweaks
Optimize square root algorithm
Enable unaligned_access
DOLBY dap dependency fix
Ultrasound & ASoC : qdspv2 tweaks
Changed the following :-
Update 'zzmoove' cpu_gov to v1_beta-8
Set 'zzmoove' as the default CPU Gov
R11 --> 22/08/2015
Merged latest CM updates
R10 --> 13/08/2015
Once again rebuilt the whole kernel !
Updated with latest CM sources
Possibly fix interactive deep-sleep issues
R9 --> 25/07/2015
Updated with the latest CM sources
Rebased and built whole kernel from SCRATCH
Removed useless tweaks
Updated cpu_hotplugs & cpu_govs
Optimized zzmoove profiles again
R8 --> 11/07/2015
Updated with the latest CM sources
Reverted RAM OC to 566MHz
Reverted some power hogging tweaks
Updated hotplugs :- intelliplug, msm-hotplug (neobuddy89 versions)
Added Bricked Hotplug
Optimized zzmoove profiles
R7 --> 30/06/2015
Disabled msm_limiter
zzmoove : add back zzopt & zzmod, zzopt unstable for now.
Introduce kernel cooker
Bug fixes
R6 --> 24/06/2015
Updated kernel version to 3.4.108
Enabled kernel_config_neon
zzmoove : remove profiles 'zzopt' & 'zzmod'
Add strict_aliasing & modulo_sched flags
Add msm:kgsl & wcnss tweaks (see GitHub)
Add MSM Frequency Limiter driver v3.6
Add Ultrasound & ASoC : qdspv2 tweaks (see GitHub)
RAM OC to 566 MHz
And many more I can't fit in here, so please checkout GitHub.
R5 --> 20/06/2015
Added USB Fast Charge v2
Enabled NEON mode
Added Ex-FAT support
SE Linux tweaks (see GitHub)
zzmoove : set default profile to 2
tune up some governors
Enable intelliplug by default
Random / entropy tweaks
R4 --> 17/06/2015
CPU UC to 96 MHz
GPU OC to 533 MHz & UC to 100 MHz
Disabled PowerHal log spam
Reclaim RAM from loggers, increasing default ram to 883 Mb
Disable gentle_fair_sleepers for increased I/O
Enable unaligned_access
Enable arch_power
Use power efficient workqueues for bam_dmux
Optimize square root algorithm
Many tick, clockevents & timer tweaks (see GitHub)
Lower swappiness from 60 --> 45
Added optimized ARM_RWSEM algorithm
Force SE Linux permissive
Added state notifier driver
Enabled quick wakeup
NOATIME and NODIRATIME as default
R3 --> 14/06/2015
CPU Govs removed :- wheatley, nightmare, HYPER, darkness, pegasusq, ondemandplus
Added simple GPU Algorithm
3 new CPU Hotplugs added :- intelliplug, alucard, msm-hotplug.
Power effecient Wqs enabled by default
Reclaim RAM from loggers
devfreq:Add conservative governor
devfreq tweaks (see GitHub)
Dynamic FSync added
Intellithermal v2 added
R2 --> 13/06/2015
New CPU Govs added :-
intelimm, intellidemand, intelliactive, smartmax, pegasusq, alucard, impulse, ondemandplus, wheatley, yankactive, nightmare, HYPER, darkness, zzmoove.
New TCP Congestions enabled :-
westwood, cubic, reno, hstcp, hybla, vegas, veno, scalable, lp, yeah, illinois, hctp, advanced, highspeed.
New I/O Schedulers added :-
fiops, vr, zen, sio, bfq, cfq, deadline, noop, tripndroid, fifo
Added KCAL v2 by Savoca
Optimized slub memory allocation
Increase torch power by 20 mA
Added stereo call recording support
psx2usb
Added NVIDEA Power effecient patches
Changed CFlags = Ofast
Optimize sfck compression
Many sched tweaks and optimizations (see GitHub)
R1 --> 12/06/2015
Initial Release
FAQ
FAQ
This kernel does not have X, Y or Z feature. Please add it !
No such requests shall be entertained.
For this device the closer to stock we are, the better it is. Hence no need for "fancy" useless features/tweaks. The main aim of halogen is to bring performance without compromising stability & battery. And that is what I intend to do.
AND if you really want this or that feature which is not there in halogen, please feel free to compile your own builds.
Oh no ! I encountered a BUG !
Upload the file named last_kmsg that located in /proc/last_kmsg. It contains kernel logs. Clearly state the bug / what you experienced along with your current kernel settings. Bug reports without logs will be ignored.
Recommneded settings ?
Halogen is pre-configured for best. For custom settings please google, do some research and you are encouraged to post your own settings in this forum. You can start here.
My battery drained overnight !! Look at these screenshots...
Not a halogen fault. The kernel does not “drain” battery. On Android devices, the kernel provides a mechanism for keeping the phone awake, called a wakelock. Processes running on the device (e.g. apps and services) can ask the kernel for a wakelock, and the kernel will oblige. So yes, the kernel is technically keeping the phone awake, but only because an app or service has asked it to. It is these apps and services that are misbehaving and causing drain, not the kernel. Doze mode, introduced in Android Marshmallow, is designed to limit the time that apps and services can wake up the device.
All thanks to @flar2 for his excellent post.
Wow,
What is better setting for this Kernel ?
legendsbr said:
Wow,
What is better setting for this Kernel ?
Click to expand...
Click to collapse
There is not much to set in this kernel at present. Leave it as it is. Tweak sound to your hearts desire !
What governors & I/O schedulers are already included? Just the "basic" AOSP kernel ones for now?
Yes...
But updates will come soon !!!
You simply did it! Thank you so much!
There is a long way to go but I hope you can add more stuff, not forgetting the DoupleTap to wake up the screen
Testing
NEW BUILD IS UP !!!
[ 12 June, 2015. Version --> R2 ]
New features added :-
** 14 new cpu govs added !!!(check changelog for their names) **
** New I/O schedulers added (added tripndroid) **
** New TCP Congestions added **
** Stereo call recording **
and MUCH, much more......................CHECK CHANGELOG.
Did you know ? :-
With the release of R2, Halogen Kernel becomes the ONLY kernel with maximum number of cpu govs !!! (among all kernels for stock/cm of titan/falcon).
This kernel has around 20 cpu govs !!!
NOTE :-
Try reading this guide by @gsstudios before selecting out among the many CPU Govs.
E _N_J_O_Y !!!
This kernel really works for battery life... Smooth and fast and also improves battery life. Appreciate you're work!
giannis_mathiou said:
This kernel really works for battery life... Smooth and fast and also improves battery life. Appreciate you're work!
Click to expand...
Click to collapse
Thanks for review...
More updates will come soon !
This kernel mainly focuses on audio and battery life.
zakee94 said:
Thanks for review...
More updates will come soon !
This kernel mainly focuses on audio and battery life.
Click to expand...
Click to collapse
Thank you so much for the updates!
Can you make a post with the recommended settings for battery life and the best performance possible?
TiGuy82 said:
Thank you so much for the updates!
Can you make a post with the recommended settings for battery life and the best performance possible?
Click to expand...
Click to collapse
Of course I will....
zakee94 said:
Of course I will....
Click to expand...
Click to collapse
there is something terribly wrong... at boot maximum cpu frequency is set to 384MHz, this give terribly long boot time, stuttery bootanimation and longer time for apps optimization after a rom update
EDIT: temporarily solved with an init.d script, here it is if someone has the same problem https://www.dropbox.com/s/qmcdlljjj0klzaf/cpufreq.zip?dl=0
ktulu84 said:
there is something terribly wrong... at boot maximum cpu frequency is set to 384MHz, this give terribly long boot time, stuttery bootanimation and longer time for apps optimization after a rom update
Click to expand...
Click to collapse
Even I had been facing the bug...BUT I fixed it out and the BUG IS NO MORE !!!
I will be soon releasing the update ! The problem was with some improperly adapted CPU governors which limited the max cpu freq to 384 at boot. I have removed them and now the cpu clocks @ 11190 during boot.
I appreciate your work with the script. Its good, and I hope you will keep supporting my kernel in the future.
@ktulu84
Available RAM is less than stock CM12.1 kernel - ~900 MB vs ~860 MB. Pretty sure you're already aware of it, but thought I'd highlight it anyway just in case.
Sent from my Moto G 2014 using Tapatalk
Is the kernel stable? i'm using cm12.1 for daily use and some of the kernels i've tried always gave me the problem where the logcat is spammed with something liek "failed to acquire lock" everytime i touched the screen, can someone report?
xeraphael said:
Available RAM is less than stock CM12.1 kernel - ~900 MB vs ~860 MB. Pretty sure you're already aware of it, but thought I'd highlight it anyway just in case.
Sent from my Moto G 2014 using Tapatalk
Click to expand...
Click to collapse
Yes I m aware... It will be improved in future versions.
However it does not matter much, Linux handles memory in a different way and will release appropriate ram when required. What really matters is whether you are getting a smooth experience or not.
xeraphael said:
Available RAM is less than stock CM12.1 kernel - ~900 MB vs ~860 MB. Pretty sure you're already aware of it, but thought I'd highlight it anyway just in case.
Click to expand...
Click to collapse
Yes, there are changes in that. As the OP said, it depends on the kernel. Since our device has 1024MB RAM, the remaining RAM gets allocated to Graphics, audio processing, etc. If you are familiar with it, its very similar to Intel & AMD's allocation of RAM to Graphic memory in computers.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
God's Kernel-True God Of Kernels
ABOUT God's Kernel:
AudioGod said:
God's Kernel is a open source kernel designed to unleash the power of Redmi 1S. The Aim of This project is to give a most stable ,power-full,ultra-fast kernel with Max Battery Life which is required for every Redmi 1S user.
Click to expand...
Click to collapse
DISCLAIMER:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Kernel currently supports
all KK LP MM CM AOSP and MIUI based roms
CHANGELOGS
DOWNLOAD LINKS:
GK_ARMANI_13052016_2047.zip - 6.67 MB
GK_ARMANI_MIUI_13052016_2102.zip - 7.38 MB
Older builds
INSTALLATION STEPS:
Minimum Requirements To Install God's Kernel:
Recommended Custom Recovery TWRP and a Rooted Device
Installation Procedure:
Boot Into Recovery Mode
Dirty flash the rom you are using (if needed gapps too)
Flash provide Kernel Zip
Flash UKM zip http://forum.xda-developers.com/redmi-1s/development/zip-synapse-universal-kernel-manager-r1-t3282133
Wipe Cache and Dalvik
Reboot To System
Follow Us on :
Google+
https://plus.google.com/communities/105868185017241678214
Huge Thanx to my tester :
@doylefermi
@vjraj (i still hate you for the R3 leak)
@deadpool01
@Megamite
@vedantkamlaskar
@TheStrix
n last but not the least @@Biplov Biswas
XDA:DevDB Information
[KERNEL][MM/LP/KK/MIUI][CM/AOSP][13-05-2016] God's Kernel R9, Kernel for the Xiaomi Redmi 1S
Contributors
Tarun93, fefifofum,rebelos,luffy.d, onano,Kra1o5 and all the other co devs
Source Code: https://github.com/tarunkapadia93/gk_armani/
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R9
Stable Release Date: 2016-05-13
Created 2015-10-03
Last Updated 2016-05-13
Change log:
God's Kernel-R1
Built with UBERTC 6.0 and other tweaks.
Alucard Hotplug
USB Fast Charging
Franco's Custom thermal
Faux Sound
KCAL with the latest update
Fsync Disable
DT2W
Kexec[Multi Rom Support] latest update
CPU OC to 1.7Ghz
Selinux Permanently Permissive
General Optimization & Tweaks
God's Kernel-R2
rebased on LNX.LA.3.5.2.2.2-00510-8x26.0 (Xiaomi's Official Kikat kernel)
alucard updated
powersuspend hooks fixed
added sio i/o
add intellidemand intellimm intelliactive
USB force fast charge limit raised from 1000 mA to 1500 mA
NEON optimized kernel
exFAT support
LP and KK WiFi prima drivers updated to LA.BF.1.1.1_rb1.26 from prima: update to LA.BF.1.1.1_rb21
added MIUI support
DT2W and S2W+S2S removed for this release
God's Kernel-R3
huge cleanup n patching
zzmove smartmax elementalx yankactive alucard impulse
MM compatible
interactive governor updated
i/o scheds tuned
switched from alucard to bricked hotplug
replaced franco's thermal solution to simple thermals by sultanxda
selinux will be permissive on boot but can we changed
KSM added back
removed the **** old mulitcore powersavings which never worked right xD
God's Kernel-R4
Based on the latest msm8226 Caf tags thanx to @fefifoum
added a few governors (nightmare, darkness)
added new I/O scheds (FIFO SIOPLUS TRIPDROID)
tuned all the governors n i/o for better performance n smoothness
alucard_hotplug added back and removed bricked
LMK tune up
VFS tune up
allow userspace config of simple_ondemand
Native D2W
Adreno idler
KCAL updates
freezer patches
bam_dmux patches
seccomp patches
sched patches
God's Kernel-R5
Kexec removed (its not working ATM for any armani kernel)
Thermals tuned
Flicker fix
Splash add
Unbalanced IRQ on boot fixed
Zram updates
Governors tuned
GK logo added thanx to @ramashish Mishra for providing me with the logo and the banner
God's Kernel-R6
using the latest caf tags LA.BF.1.1.3-00910-8x26.0
synced with armani-dev's latest changes
Backport Adaptive LMK from Linux 3.10
Kexec added back
features exposed to user
-gentle fair sleepers
-arch power
-fsync
-software crc
removed MC powersaver again(i never really liked it xD)
Power efficient work-queues added back
added few more wakelock fixes
a few governors added xD
added a bricked msm_hotplug intelli plug
alucard synced and merged with the last sources from alucard24
Random32 updates
Zram updates
Powersuspend removed updated to State Notifier
DT2W removed for this release
VM reclaim
High performance sound
KSM
adreno idler disabled by default (enable if you wanna save some battery)
-Ofast graphite -ffast-math and karit optimization
lots of more stuff
God's Kernel-R7
-used the latest caf tag LA.BF.1.1.3-01010-8x26.0
-GPU OC fixed
-Simple Algo for nsn_aderno_tz (disable idler if you wanna enable this)
-switched back kk touch drivers
-MIUI hardware key fixes
-Hotplug
-alucard hotplug
-msm_hotplug (enabled by default)
-Governors
-alucard
-darkness
-elementalX
-HYPER
-impulse
-nightmare
-smartmax
-yankactive
-zzmoove
-new thermal solution
-XZ compression
-huge interactive updates to match up with the latest codes
-ondemand clean up
-F2FS updated from mainline Linux 4.4
DT2W added back
fast charge clean up n simpler implementation
fixed charging issues from faced in R6
major clean ups in kernel :victory:
God's Kernel-R8
- merged the latest LA.BF.1.1.3-01210-8x26.0 caf tag
- clean up n added builtin synapse and UKM access (no more flashing UKM )
- removed interactive updates for now
- updated the governors
-thermals retuned
- lots of minor tweaks and tune ups
- f2fs fix ups
God-R9
-merged the latest LA.BF.1.1.3-01510-8x26.0 caf tag
-retuned thermals and LMK
-interactive patches updated
GET LOGS IF YOU WANNA COMPLAIN ABOUT SOMETHING OR ELSE I AINT LISTENING TO ANY THING YOU SAY
here is a thread to understand how to get them
http://forum.xda-developers.com/showthread.php?t=2185929
Another kernel :laugh: awesome!
Waiting for download links gonna try it.
Thanks man..waiting for the link to test
i am really waiting for the kernel which will unleash the power of redmi 1s like 1.8ghz oc+650mhz gpu.
thanks for your hard work. thanks for you appreciation.
really looking forward for the kernel.......... thanks alot @Tarun93 your works have been tremendous......
Small query will it be compatible with miui 7???.
slst said:
really looking forward for the kernel.......... thanks alot @Tarun93 your works have been tremendous......
Small query will it be compatible with miui 7???.
Click to expand...
Click to collapse
working on that part mate
Tarun93 said:
working on that part mate
Click to expand...
Click to collapse
one request tarun pls dont limit the charging current.its very annoying to wait for 3hrs+ to charge mobile full.if you can increase then go for it higher than 1amp
Does it support f2fs, or i have to re-format data?
Tapatalk-kal küldve az én HM 1SW-el
*brings out the grapite sheets* we need to cnc a cool case
pls use latest optimization to give more ram and less ram usage to be used by system..
another custom kernel for our little beast.
does it compatible with miui?
or only cynogen based only.
thanks
delang said:
another custom kernel for our little beast.
does it compatible with miui?
or only cynogen based only.
thanks
Click to expand...
Click to collapse
build2 will be miui supported
Great work pal. Can't wait for links to be up.
Sent from my HM 1SW using Tapatalk
@Tarun93 what app u recomend to control this kernel?
A small review about the kernel..
The kernel is performing very good considering the initial release.
Using this kernel with latest temasek ROM.
Performance is good and no lags for normal use.
Multitasking performance is also good with few hiccups here and there.
Gaming performance is good.Able to play asphalt 8 at high settings with minor or no lags at stock clock speeds.
Battery performance ..... Yet to check...will update after 2-3 cycles
The only problem is that I'm unable to set max frequency to 1689 MHz through kernel auditor app.
It is stuck at 1401 MHz.
I request @Tarun93 to look into the issue.
Keep up the gud work!!
Oops double post
UltimateBlade said:
@Tarun93 what app u recomend to control this kernel?
A small review about the kernel..
The kernel is performing very good considering the initial release.
Using this kernel with latest temasek ROM.
Performance is good and no lags for normal use.
Multitasking performance is also good with few hiccups here and there.
Gaming performance is good.Able to play asphalt 8 at high settings with minor or no lags at stock clock speeds.
Battery performance ..... Yet to check...will update after 2-3 cycles
The only problem is that I'm unable to set max frequency to 1689 MHz through kernel auditor app.
It is stuck at 1401 MHz.
I request @Tarun93 to look into the issue.
Keep up the gud work!!
Click to expand...
Click to collapse
Firstly thnx for the stats n review
For multitasking I will recommend u tune the low memory killer to aggressive or very aggressive
Use kernel auditor for all the tweaking and for people who like to tweak a step further I recommend aero kernel control but u have to add the things manually by adding the sysfs path in the misc tab
As for the freq that's a know bug in kernel auditor that sometime there is a freq glitch and if u mean it was showing the 1689 step n u set it yet it was going back to 1401 the. Pls just calm it's normal as the thermal solution is doing it's work
*EDIT*
a request to.all the users pls do not set DT2W On boot via any app it will give u a non responsive screen on boot up I will fix it in the second build with the addition. To the miui support :thumbup:
Sent from my HM 1SW using XDA mobile app
Tarun93 said:
Firstly thnx for the stats n review
For multitasking I will recommend u tune the low memory killer to aggressive or very aggressive
Use kernel auditor for all the tweaking and for people who like to tweak a step further I recommend aero kernel control but u have to add the things manually by adding the sysfs path in the misc tab
As for the freq that's a know bug in kernel auditor that sometime there is a freq glitch and if u mean it was showing the 1689 step n u set it yet it was going back to 1401 the. Pls just calm it's normal as the thermal solution is doing it's work
*EDIT*
a request to.all the users pls do not set DT2W On boot via any app it will give u a non responsive screen on boot up I will fix it in the second build with the addition. To the miui support :thumbup:
Sent from my HM 1SW using XDA mobile app
Click to expand...
Click to collapse
Thanks dude!!! I was about to report the d2w bug.And one more thing ,the phone is getting very hot while charging in switch off mode.And can u please suggest screen color cal values for more amoled like color production.
UltimateBlade said:
Thanks dude!!! I was about to report the d2w bug.And one more thing ,the phone is getting very hot while charging in switch off mode.And can u please suggest screen color cal values for more amoled like color production.
Click to expand...
Click to collapse
Which rom ???
and for me 240 245 255 works decent brightness n contrast at 130
[Mi5][KERNEL][HMP/MIUI][Linux 3.18.31] Floppy Kernel [RC1.3][13/01/18]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Floppy is kernel for all custom rom based on LineageOS 14.1, 15.1 and Miui , support the Xiaomi Mi5
Code:
#include <disclaimer.h>
* Your warranty is now void. *
* No guaranteed this'll explode your device, be careful, follow the instructions ! *
*don't point at me if your alarm dies after flashing this kernel ! *
Based on Linux Kernel 3.18.31
Based on LineageOS Kernel
GCC Linaro 7.2.1, UBERTC 8.0, SaberMod 7.0 and Google 4.9
Governors: Impulse, Despair, Zzmove, Darkness, Blu_active, ElementalX, Interactive, Conservative, Ondemand, Powersave, Lionheart, Userspace, Bioshock, Alucard, Hyper, Wheatley, Nightmare, Dancedance, Adaptive, Pegasusq, Chill, Cafactive and Performance.
I/O Schedulers: Noop, Deadline, Cfq, Fiops, Bfq, Zen, Sio, Sioplus, Maple and Tripndroid.
Compiled with -Os
Full Linaro Optimizations ON
Optimized Parameters from L Speed @Paget96
Standard MSM8996 Frequency CPU | GPU for all variants - credits : whyorean
Overclock CPU Big core at 2265Mhz and Little core at 1728Mhz
Google Snappy Algorithm
ARM RWSEM Algorithm
Charge Control module - credits : xNombre
Wireless adapter (LIB80211, RTL8180, RTL8187, MAC80211, EEPROM: LEGACY, MAX6875, 93CX6, 93XX46)
Spectrum support
Kexec HardBoot support
Wireguard
Kernel Samepage Merging (KSM)
Dynamic File Sync and Asynchronous FIle Sync - credits : andip71 | Francisco Franco
Passing SafetyNet
[*] Frandom - Entropy Generator
USB OTG NTFS r/w Support
SYSInterface Gentle Fair Sleepers
[*] Some CFLAGS optimizations
Performance enhancements
OC Slimbus frequencies to provide better sound quality
Lazyplug - credits : arter97 | frap129
Backlight Dimmer
Arch Power saving - credits : kirananto | Cl3Kener
Adreno Idler- credits : arter97 | yarpiin
[*] Intelli-Thermal v3.0 - credits : faux123
Sound Control - credits : flar2 | me
Support f2fs, exfat, ntfs filesystem
Quick WakeUp Driver and power suspend 1.7 - credits : Paul Reioux | Jean-Pierre Rasquin | Francisco Franco
Support cpu boost, cpu input boost and fingerprint boost
MDSS color control (Kcal v2) - credits : flar2 | andip71
Sysfs interface to Enable/Disable CRC - credits : whyorean
[*] Sysfs interface CPU Vdd levels
Boeffla wl blocker v1.1.0: sensor_ind, msm_hsic_host, wlan_rx, wlan_ctrl, wlan, ipa, qcom rx and more - credits : Francisco Franco | andip71
Vibration Control Intensity
TCP Congestion Algorithms: Westwood (default), Reno, Bic, Highspeed, Hybla, HTCP, Vegas, Scalable, Lp, Yeah and Illinois.
And much more!
First time:
Reboot to recovery
Flash FloppyKernel.zip
Flash magisk (optional to get root)
Wipe cache e dalvik cache
Reboot
Update the kernel:
Reboot to recovery
Flash FloppyKernel.zip
Wipe cache e dalvik cache
Reboot
Coming from another kernel:
Reboot to recovery
Flash your ROM
Flash FloppyKernel.zip
Flash magisk (optional to get root)
Wipe cache e dalvik cache
Reboot
Floppykernel
FloppyKernel's Autonomous Builds
FloppyTeam
FloppyReleases
Donate here, if you like my work!!!
LineageOS
Mi5Devs
@GreekDragon
XDA:DevDB Information
FloppyKernel, Kernel for the Xiaomi Mi 5
Contributors
Jonas Cardoso, InsideMuz
Source Code: https://github.com/JonasCardoso/android_kernel_xiaomi_msm8996
Kernel Special Features: A magical support, I am all day here, reading the publications of the posts, ready to help in any doubt (unless you have not read the OP that contains the information that you need).
Version Information
Status: Stable
Current Stable Version: RC1.3
Stable Release Date: 2018-01-13
Created 2017-11-29
Last Updated 2018-08-20
RC1 - 28/11/2017
Changes from source "LineageOS/android_kernel_xiaomi_msm8996"
kernel: support for GCC 5, 6 and 7
cpufreq: added new governor
block: added new iosched
filesystem: add NTFS r/w support
power : power_suspend 1.7 - credits : Paul Reioux | Jean-Pierre Rasquin
sched: Add SysInterface for GENTLE_FAIR_SLEEPERS
int_sqrt: Improve 3x faster integer sqrt
sync: Dynamic Sync Control 2.0
fs: Async I/O latency to a ssd greatly increased, 34% gain (Creds: kl…
include: Set 1024KB as Max Read ahead - more performance now
thermal : intelli-Thermal v3.0
ASoC: wcd9335: Sound control
msm8996: all variants same clock
staging: Google Snappy
Power : Add Quick WakeUp Driver
cmdline: Safetynet
fs: add exfat support
cpufreq: show cpu voltages via sysfs 009a6c0
cpufreq: Add CPU Input Boost Driver : SultanXDA
cpufreq: cpu-boost: Optimizations
fs: Dynamic Sync Control 2.0 and MDSS color control
drivers: Slimbus Overclock
gemini: Enable All TCP Congestion Algorithms
OC : Standard MSM8996 Frequency CPU | GPU
devfreq : Add Adreno Idler
cpufreq: add fingerprintboost and lazyplug
drivers: intelli-Thermal v3.0
version: floppykernel RC1
RC1.1 - 10/12/2017
SoundControl: fixed speaker \o/
ramdisk: add tweaks on init.floppy.rc
char: disabled frandom
gemini: enabled ksm
gcc: support gcc 7.x and 8.0 (Linaro and UBERTC)
zip-creator: add spectrum support
drivers: misc: implement usb fast charge mode
version: floppykernel RC1.1 62e569c
zip-creator: delete zip build 8ae3d63
RC1.2 - 27/12/2017
android: binder
ALSA: compress: Add DSD format support for ALSA
ALSA: compress: Add APTX format support in ALSA
firmware: Update synaptic
firmware: Update fte8716
spectrum: don't change clock cpu
kernel: added support to lithium
kernel: added support to natrium
kernel: added support to scorpio
msm8996: Overclocking frequencies
msm: qdsp6v2: Allow 320K AAC encoding
Add Kexec HardBoot Support
Revert "drivers: intelli-Thermal v3.0"
Merge tag 'LA.UM.5.5.r1-06400-8x96.0' into HEAD
drivers: staging: Update qcacld-2.0 driver
version: floppykernel rc1.2
build.sh: update device.prop
defconfig: CPU and GPU more battery-friendly
wakeup: More Wakelocks
RC1.3 - 13/01/2018
zip-creator: update AnyKernel2
build.sh: update device.prop
defconfig: CPU and GPU more battery-friendly
zip-creator: update AnyKernel Setup
wakeup: More Wakelocks
msm: mdss: kcal: Add KCAL support for post processing control [v2] 6b40a22
zram: LZ4 after LZ0
block: Add Maple I/O Scheduler
zip-creator: Patch to remove dm-verity
gcc8: fix warnings
defconfig: Wireless Adapter
net/wireguard: add wireguard importer
zip-creator: device check
dtbTool: now dtbTool will be built
travis: GitHub Release
zip-creator: update patchs
boeffla_wl_blocker: update to wakelock blocker driver v1.1.0 3efdcbf
defconfig: enable lazyplug a9785fe
defconfig: enable adreno idler a5d0558
cpufreq : Add Chill CPU Governor - credits : Joe Maples (@frap129) 6d26826
cpufreq: Add CAF-Active Governer - credits : Jean-Pierre Rasquin 4ba764b
version: floppykernel rc1.3 34479b6
travis: deploy in lineage-14.1 branch e5f4308
Frequently asked questions
Q: Will this conflict with any mod I'm using?
A: As long as it doesn't have any entropy related stuff, its okay. Since the kernel already comes with an inbuilt entropy generator, it will conflict with the ones from mod, causing a poor, stuttered performance!
Q: Deep Sleep isnt working for me, Google Services causing wake-locks, what to do?
A: Go to settings, Privacy, Privacy Guard, All apps, long press Google Services, and deny/disable wake-locks! (Thanks to @Paget96 for the solution)
Q: Which version should I flash?
A: Flash kernel with toolchain that you prefer.
Q: What is the difference between the UBERTC, Linaro, SaberMod and Google toolchain? Which one is the best?
A: It's a good read on the toolchain UBERTC you are wanting to know more about it, this for Linaro, this for SaberMod and this for Google.
Q: What is the difference between the HMP and Miui kernel?
A: Miui folder is for miui roms -> xiaomi.eu, MiuiBR and other derivatives from miui official. HMP folder is for aosp rom and derivatives -> Aosp, Lineage and other derivatives from aosp
Q: Is your kernel secure?
A: You MAY face some issues, but it's safe! My cell phone has not exploded yet.
Q: WiFi doesnt work for me.
A: Reflash ROM and Kernel.
Q: All variants of the Xiaomi Mi5 have the same CPU and GPU clock?
A: Yeeh.
Q: I have problems with the sound control of the speaker and microphone
A: Yeeh, I have too, bugs today, bugs tomorrow, bugs forever.
Q: What application can I use to configure the kernel?
A: Use Spectrum, and if you have enough knowledge of what to modify or do in the application use together Kernel Adiutor.
Q: Can I use the kernel source in my ROM?
A: If you want to use my kernel in your ROM, just put my name in the credit, just like I did.
Q: Does your kernel support writing to the NTFS file system?
A: Yeeh, you can use flash drives and HD with NTFS via OTG.
Q: My cpu clock is locked in 1190Mhz with any governor.
A: Just disable the thermal control in the kernel temperature settings.
Q: I have problems with your kernel.
A: Take a logcat and kmesg, this website and this video should help you
Q: Why does my magisk and root disappear after installing your kernel?
A: The kernel script makes changes that directly interfere with both, reinstall the magisk that it will function normally, follow this installation line always: FloppyKernel -> Magisk -> Reboot system.
Q: Does your kernel support Miui ROM?
A: Yes, support was added in "RC1.1".
Q: What is the "Battery" profile in the spectrum?
A: Based on Project Zhana & X.A.N.A was made for trying to be as efficient as possible without compromising the performance. Thanks to the discovery on Voltages used by our SD820 I could make a profile that utilizes more the BIG cluster. My first attempt was to move ALL the load to the BIG cluster, it was against anything that I have learned about little. BIG CPU but I tried, it turned really good at first, low usage was just amazing... But on more usage things didn't go that good. So what I did it was to give a twist to things, but not such twist. It kind of works like Nameless and Shotgun, Mostafa Wael and I worked the same idea. #LITTLE cluster will be running on low-mid frequencies but delivers full performance when is needed. # BIG Cluster will help LITTLE ease Load, but in a great way than before. Things can be done faster and more efficient giving us profit in form of battery. It should run smooth on all scenarios, but you guys tell me. You can easily get around 7~9 hours SOT for 24 hours even more If you don't play game. This will, of course, may vary, but it will definitely be better.
Q: What is the "Balanced" profile in the spectrum?
A: Based on GhostPepper was made to uses a quantized, frequency-aligned parametric curve to influence low core clock rates while providing extremely smooth transitions from each clock rate and exceptional battery life. Really well-defined clock speed escalation for a good battery and performance.
Q: What is the "Performance" profile in the spectrum?
A: Based on FusionP this profile brings a more "agressive" way to scale frequencies. It will scale frequencies sooner(regarding load values from cpu) and will use more the big cluster to provide more performance doing the tasks on hands. Battery should not take a big hit but using heavy demanding tasks you can expect a higher drain.
Q: What is the "Gaming" profile in the spectrum?
A: Based on Burnout PR5, this profile's main goal is to provide absolute maximum performance when needed, but lies low quite well. You see, some times I see the CPU hitting some of the high freqs of 1190 while making something as simple as watching YouTube or playing some spotify tracks needlessly, and sometimes I feel it is a bit slower than it should be in things like brute multitasking. Most profiles do aim at bringing a mid-ground to rest on. But with the sensible words of one of my favourite idols Jeremy Clarkson, he says 'Power solves everything' and right he is. By eliminating the mid freqs of the Little cluster and efficiently using some specific frequency steps, you get some power savings by staying on lower freqs as much as possible, and even on brutal tasks you get the job done faster as well, since the CPU will give you all the power to finish the job as fast as it can, and hit back to idle faster.
Q: I want more information about your spectrum profiles.
A: Read this thread.
Q: I want more information about governors, I/O Scheduler, Hotplug, TCP Algorithms and other things.
A: Read this thread.
Thx to @musabcel
Antutu Benchmark
Geekbench
It seems a very nice kernel, big up for the dev, Im hoping that this kernel will be updated for Oreo?
Francesco0301 said:
It seems a very nice kernel, big up for the dev, Im hoping that this kernel will be updated for Oreo
Click to expand...
Click to collapse
I'm just waiting for the Oreo ROMs become more stable
Im following you from your L7 development times. And i have l7 and mi5. Now im using jdc oreo but i will install LOS for try your work. I hope you will continue your work for oreo.
Wich is better, Linaro Or UBERTC?
What's the difference between linaro and ubertc?
hi.. I'm was installed Linero version for my Mi5pro. i have questions.
- why my model phone goes to Samsung Galaxy Note 7.
- my magisk root gone, after intalled these kernel version.
Thanks.
roomraditz said:
hi.. I'm was installed Linero version for my Mi5pro. i have questions.
- why my model phone goes to Samsung Galaxy Note 7.
- my magisk root gone, after intalled these kernel version.
Thanks.
Click to expand...
Click to collapse
First question: idk, my model phone is normal, Mi5, try install boot.img and after kernel, are you using any modifications ?
Second question: normal, after install kernel magisk gone, you have to install again, because in the installation it is lost
Good to see new kernel ?? will flash and try
miui support ?
Linaro or UBERTC?
I use the version with Linaro and I am very satisfied, I recommend that you test both versions and see which one is best for you
gunnered14 said:
miui support ?
Click to expand...
Click to collapse
No, dont try flash this, is only for aosp, LOS and its variants
Jonas Cardoso said:
First question: idk, my model phone is normal, Mi5, try install boot.img and after kernel, are you using any modifications ?
Second question: normal, after install kernel magisk gone, you have to install again, because in the installation it is lost
Click to expand...
Click to collapse
thank you, that problem solved. and can you explain difference Liberio and Ubertcc.. ?.
thank you so much for this kernel. Smooth and good battery
hope you keep dev this kernel
roomraditz said:
thank you, that problem solved. and can you explain difference Liberio and Ubertcc.. ?.
Click to expand...
Click to collapse
Here
i'm use u'r kernel since this thread open.
I use ubertc version, it's very smooth.. but sometimes my device freeze, but no problem at all coz the true culprit is magisk magic charging module..
but just now im trying linaro build.. i hope no problem like ubertc build..
Im suggesting fast charging module bro like dragonxia 3.8 OC..
Don't work with Miui rom ?
Envoyé de mon MI 5 en utilisant Tapatalk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Floppy is kernel for all custom rom based on LineageOS 14.1, 15.1 and Miui , support the Xiaomi Mi Note 2
Code:
#include <disclaimer.h>
* Your warranty is now void. *
* No guaranteed this'll explode your device, be careful, follow the instructions ! *
*don't point at me if your alarm dies after flashing this kernel ! *
Based on Linux Kernel 3.18.31
Based on LineageOS Kernel
GCC Linaro 7.2.1, UBERTC 8.0, SaberMod 7.0 and Google 4.9
Governors: Impulse, Despair, Zzmove, Darkness, Blu_active, ElementalX, Interactive, Conservative, Ondemand, Powersave, Lionheart, Userspace, Bioshock, Alucard, Hyper, Wheatley, Nightmare, Dancedance, Adaptive, Pegasusq, Chill, Cafactive and Performance.
I/O Schedulers: Noop, Deadline, Cfq, Fiops, Bfq, Zen, Sio, Sioplus, Maple and Tripndroid.
Compiled with -Os
Full Linaro Optimizations ON
Optimized Parameters from L Speed @Paget96
Google Snappy Algorithm
ARM RWSEM Algorithm
Charge Control module - credits : xNombre
Wireless adapter (LIB80211, RTL8180, RTL8187, MAC80211, EEPROM: LEGACY, MAX6875, 93CX6, 93XX46)
Spectrum support
Kexec HardBoot support
Wireguard
Kernel Samepage Merging (KSM)
Dynamic File Sync and Asynchronous FIle Sync - credits : andip71 | Francisco Franco
Passing SafetyNet
[*] Frandom - Entropy Generator
USB OTG NTFS r/w Support
SYSInterface Gentle Fair Sleepers
[*] Some CFLAGS optimizations
Performance enhancements
OC Slimbus frequencies to provide better sound quality
Lazyplug - credits : arter97 | frap129
Backlight Dimmer
Arch Power saving - credits : kirananto | Cl3Kener
Adreno Idler- credits : arter97 | yarpiin
[*] Intelli-Thermal v3.0 - credits : faux123
Support f2fs, exfat, ntfs filesystem
Quick WakeUp Driver and power suspend 1.7 - credits : Paul Reioux | Jean-Pierre Rasquin | Francisco Franco
Support cpu boost, cpu input boost and fingerprint boost
MDSS color control (Kcal v2) - credits : flar2 | andip71
Sysfs interface to Enable/Disable CRC - credits : whyorean
[*] Sysfs interface CPU Vdd levels
Boeffla wl blocker v1.1.0: sensor_ind, msm_hsic_host, wlan_rx, wlan_ctrl, wlan, ipa, qcom rx and more - credits : Francisco Franco | andip71
Vibration Control Intensity
TCP Congestion Algorithms: Westwood (default), Reno, Bic, Highspeed, Hybla, HTCP, Vegas, Scalable, Lp, Yeah and Illinois.
And much more!
First time:
Reboot to recovery
Flash FloppyKernel.zip
Flash magisk (optional to get root)
Wipe cache e dalvik cache
Reboot
Update the kernel:
Reboot to recovery
Flash FloppyKernel.zip
Wipe cache e dalvik cache
Reboot
Coming from another kernel:
Reboot to recovery
Flash your ROM
Flash FloppyKernel.zip
Flash magisk (optional to get root)
Wipe cache e dalvik cache
Reboot
Floppykernel
FloppyKernel's Autonomous Builds
FloppyTeam
FloppyReleases
Donate here, if you like my work!!!
LineageOS
Mi5Devs
@GreekDragon
XDA:DevDB Information
Floppy Kernel, Kernel for the Xiaomi Mi Note 2
Contributors
Jonas Cardoso, InsideMuz
Source Code: https://github.com/JonasCardoso/android_kernel_xiaomi_msm8996
Kernel Special Features: A magical support, I am all day here, reading the publications of the posts, ready to help in any doubt (unless you have not read the OP that contains the information that you need).
Version Information
Status: Stable
Current Stable Version: RC1.3
Stable Release Date: 2018-01-13
Created 2018-01-08
Last Updated 2018-08-20
RC1 - 28/11/2017
Changes from source "LineageOS/android_kernel_xiaomi_msm8996"
kernel: support for GCC 5, 6 and 7
cpufreq: added new governor
block: added new iosched
filesystem: add NTFS r/w support
power : power_suspend 1.7 - credits : Paul Reioux | Jean-Pierre Rasquin
sched: Add SysInterface for GENTLE_FAIR_SLEEPERS
int_sqrt: Improve 3x faster integer sqrt
sync: Dynamic Sync Control 2.0
fs: Async I/O latency to a ssd greatly increased, 34% gain (Creds: kl…
include: Set 1024KB as Max Read ahead - more performance now
thermal : intelli-Thermal v3.0
ASoC: wcd9335: Sound control
msm8996: all variants same clock
staging: Google Snappy
Power : Add Quick WakeUp Driver
cmdline: Safetynet
fs: add exfat support
cpufreq: show cpu voltages via sysfs 009a6c0
cpufreq: Add CPU Input Boost Driver : SultanXDA
cpufreq: cpu-boost: Optimizations
fs: Dynamic Sync Control 2.0 and MDSS color control
drivers: Slimbus Overclock
gemini: Enable All TCP Congestion Algorithms
OC : Standard MSM8996 Frequency CPU | GPU
devfreq : Add Adreno Idler
cpufreq: add fingerprintboost and lazyplug
drivers: intelli-Thermal v3.0
version: floppykernel RC1
RC1.1 - 10/12/2017
SoundControl: fixed speaker \o/
ramdisk: add tweaks on init.floppy.rc
char: disabled frandom
gemini: enabled ksm
gcc: support gcc 7.x and 8.0 (Linaro and UBERTC)
zip-creator: add spectrum support
drivers: misc: implement usb fast charge mode
version: floppykernel RC1.1 62e569c
zip-creator: delete zip build 8ae3d63
RC1.2 - 27/12/2017
android: binder
ALSA: compress: Add DSD format support for ALSA
ALSA: compress: Add APTX format support in ALSA
firmware: Update synaptic
firmware: Update fte8716
spectrum: don't change clock cpu
kernel: added support to lithium
kernel: added support to natrium
kernel: added support to scorpio
msm8996: Overclocking frequencies
msm: qdsp6v2: Allow 320K AAC encoding
Add Kexec HardBoot Support
Revert "drivers: intelli-Thermal v3.0"
Merge tag 'LA.UM.5.5.r1-06400-8x96.0' into HEAD
drivers: staging: Update qcacld-2.0 driver
version: floppykernel rc1.2
build.sh: update device.prop
defconfig: CPU and GPU more battery-friendly
wakeup: More Wakelocks
RC1.3 - 13/01/2018
zip-creator: update AnyKernel2
build.sh: update device.prop
defconfig: CPU and GPU more battery-friendly
zip-creator: update AnyKernel Setup
wakeup: More Wakelocks
msm: mdss: kcal: Add KCAL support for post processing control [v2] 6b40a22
zram: LZ4 after LZ0
block: Add Maple I/O Scheduler
zip-creator: Patch to remove dm-verity
gcc8: fix warnings
defconfig: Wireless Adapter
net/wireguard: add wireguard importer
zip-creator: device check
dtbTool: now dtbTool will be built
travis: GitHub Release
zip-creator: update patchs
boeffla_wl_blocker: update to wakelock blocker driver v1.1.0 3efdcbf
defconfig: enable lazyplug a9785fe
defconfig: enable adreno idler a5d0558
cpufreq : Add Chill CPU Governor - credits : Joe Maples (@frap129) 6d26826
cpufreq: Add CAF-Active Governer - credits : Jean-Pierre Rasquin 4ba764b
version: floppykernel rc1.3 34479b6
travis: deploy in lineage-14.1 branch e5f4308
Frequently asked questions
Q: Will this conflict with any mod I'm using?
A: As long as it doesn't have any entropy related stuff, its okay. Since the kernel already comes with an inbuilt entropy generator, it will conflict with the ones from mod, causing a poor, stuttered performance!
Q: Deep Sleep isnt working for me, Google Services causing wake-locks, what to do?
A: Go to settings, Privacy, Privacy Guard, All apps, long press Google Services, and deny/disable wake-locks! (Thanks to @Paget96 for the solution)
Q: Which version should I flash?
A: Flash kernel with toolchain that you prefer.
Q: What is the difference between the UBERTC, Linaro, SaberMod and Google toolchain? Which one is the best?
A: It's a good read on the toolchain UBERTC you are wanting to know more about it, this for Linaro, this for SaberMod and this for Google.
Q: What is the difference between the HMP and Miui kernel?
A: Miui folder is for miui roms -> xiaomi.eu, MiuiBR and other derivatives from miui official. HMP folder is for aosp rom and derivatives -> Aosp, Lineage and other derivatives from aosp
Q: Is your kernel secure?
A: You MAY face some issues, but it's safe! My cell phone has not exploded yet.
Q: WiFi doesnt work for me.
A: Reflash ROM and Kernel.
Q: What application can I use to configure the kernel?
A: Use Spectrum, and if you have enough knowledge of what to modify or do in the application use together Kernel Adiutor.
Q: Can I use the kernel source in my ROM?
A: If you want to use my kernel in your ROM, just put my name in the credit, just like I did.
Q: Does your kernel support writing to the NTFS file system?
A: Yeeh, you can use flash drives and HD with NTFS via OTG.
Q: My cpu clock is locked with any governor.
A: Just disable the thermal control in the kernel temperature settings.
Q: I have problems with your kernel.
A: Take a logcat and kmesg, this website and this video should help you
Q: Why does my magisk and root disappear after installing your kernel?
A: The kernel script makes changes that directly interfere with both, reinstall the magisk that it will function normally, follow this installation line always: FloppyKernel -> Magisk -> Reboot system.
Q: Does your kernel support Miui ROM?
A: Yes, support was added in "RC1.2".
Q: Why did your kernel go straight to "RC1.2"?
A: Because it is based on the FloppyKernel for MI5, which is already in RC1.2.
Q: What is the "Battery" profile in the spectrum?
A: Based on Project Zhana & X.A.N.A was made for trying to be as efficient as possible without compromising the performance. Thanks to the discovery on Voltages used by our SD820 I could make a profile that utilizes more the BIG cluster. My first attempt was to move ALL the load to the BIG cluster, it was against anything that I have learned about little. BIG CPU but I tried, it turned really good at first, low usage was just amazing... But on more usage things didn't go that good. So what I did it was to give a twist to things, but not such twist. It kind of works like Nameless and Shotgun, Mostafa Wael and I worked the same idea. #LITTLE cluster will be running on low-mid frequencies but delivers full performance when is needed. # BIG Cluster will help LITTLE ease Load, but in a great way than before. Things can be done faster and more efficient giving us profit in form of battery. It should run smooth on all scenarios, but you guys tell me. You can easily get around 7~9 hours SOT for 24 hours even more If you don't play game. This will, of course, may vary, but it will definitely be better.
Q: What is the "Balanced" profile in the spectrum?
A: Based on GhostPepper was made to uses a quantized, frequency-aligned parametric curve to influence low core clock rates while providing extremely smooth transitions from each clock rate and exceptional battery life. Really well-defined clock speed escalation for a good battery and performance.
Q: What is the "Performance" profile in the spectrum?
A: Based on FusionP this profile brings a more "agressive" way to scale frequencies. It will scale frequencies sooner(regarding load values from cpu) and will use more the big cluster to provide more performance doing the tasks on hands. Battery should not take a big hit but using heavy demanding tasks you can expect a higher drain.
Q: What is the "Gaming" profile in the spectrum?
A: Based on Burnout PR5, this profile's main goal is to provide absolute maximum performance when needed, but lies low quite well. You see, some times I see the CPU hitting some of the high freqs of 1190 while making something as simple as watching YouTube or playing some spotify tracks needlessly, and sometimes I feel it is a bit slower than it should be in things like brute multitasking. Most profiles do aim at bringing a mid-ground to rest on. But with the sensible words of one of my favourite idols Jeremy Clarkson, he says 'Power solves everything' and right he is. By eliminating the mid freqs of the Little cluster and efficiently using some specific frequency steps, you get some power savings by staying on lower freqs as much as possible, and even on brutal tasks you get the job done faster as well, since the CPU will give you all the power to finish the job as fast as it can, and hit back to idle faster.
Q: I want more information about your spectrum profiles.
A: Read this thread.
Q: I want more information about governors, I/O Scheduler, Hotplug, TCP Algorithms and other things.
A: Read this thread.
Hi! I tried the new version of the kernel on mi-globe 7.12.21 rom with twrp 3.2.1 .
I think i am doing something wrong as it does not boot, even if i install the latest magisk v15.
It gets to the boot image and then it shuts down the phone.
Then i reinstall mi-globe rom that comes with the stock kernel and it is fine.
alexmanu1 said:
Hi! I tried the new version of the kernel on mi-globe 7.12.21 rom with twrp 3.2.1 .
I think i am doing something wrong as it does not boot, even if i install the latest magisk v15.
It gets to the boot image and then it shuts down the phone.
Then i reinstall mi-globe rom that comes with the stock kernel and it is fine.
Click to expand...
Click to collapse
Try with version 7.11.19
Jonas Cardoso said:
Try with version 7.11.19
Click to expand...
Click to collapse
Pretty strange. It was from the mi-globe rom . I installed xiaomi.eu's version 7.12.21 and it's working. Testing it and i'll come back with feedback if needed.
none of the versions dont work on miuipro , would be nice if it worked,.. thanks
nofx161 said:
none of the versions dont work on miuipro , would be nice if it worked,.. thanks
Click to expand...
Click to collapse
Can you get log?
Jonas Cardoso said:
Can you get log?
Click to expand...
Click to collapse
Doesn't even start the rom..
@Jonas Cardoso I've a question, could you compile WiFi monitor mode with your kernel? Its a tool which let's you capture wifi packages, and enables to use tools like pcap for android.
Thanks in advance.
UnknowenDev said:
@Jonas Cardoso I've a question, could you compile WiFi monitor mode with your kernel? Its a tool which let's you capture wifi packages, and enables to use tools like pcap for android.
Thanks in advance.
Click to expand...
Click to collapse
Do you have the necessary changes for this? I do not know this feature
Thanks for the custom kernel!
Is it overclocked?
Control with kernel auditor, or can you suggest a better app?
Knz7777 said:
Thanks for the custom kernel!
Is it overclocked?
Control with kernel auditor, or can you suggest a better app?
Click to expand...
Click to collapse
Yeeh, is with OC in CPU, can you get a screen the table clocks with kernel adiutor for me?
Use spectrum for configure kernel, have four profiles and kernel adiutor if necessary
Jonas Cardoso said:
Yeeh, is with OC in CPU, can you get a screen the table clocks with kernel adiutor for me?
Use spectrum for configure kernel, have four profiles and kernel adiutor if necessary
Click to expand...
Click to collapse
Im currently waiting for the device, when it will be in my hands, i will do it. Im planning to use miui.pro with your kernel.
---------- Post added at 02:36 PM ---------- Previous post was at 02:32 PM ----------
And i tried to read about different types of compiling, still i cant understand what to download) ubertc, linaro?) Is there any difference for thr enduser?
Jonas Cardoso said:
Do you have the necessary changes for this? I do not know this feature
Click to expand...
Click to collapse
Here you go: https://null-byte.wonderhowto.com/h...android-device-with-wireless-adapter-0162943/
UnknowenDev said:
Here you go: https://null-byte.wonderhowto.com/h...android-device-with-wireless-adapter-0162943/
Click to expand...
Click to collapse
build with this feature
Knz7777 said:
Im currently waiting for the device, when it will be in my hands, i will do it. Im planning to use miui.pro with your kernel.
---------- Post added at 02:36 PM ---------- Previous post was at 02:32 PM ----------
And i tried to read about different types of compiling, still i cant understand what to download) ubertc, linaro?) Is there any difference for thr enduser?
Click to expand...
Click to collapse
miui pro dont work with my kernel
Jonas Cardoso said:
build with this feature
Click to expand...
Click to collapse
Thank you very much, I'm usually to lazy to rebuild a kernel by myself and since I love your kernel I asked you.
Thank you! ?
UnknowenDev said:
Thank you very much, I'm usually to lazy to rebuild a kernel by myself and since I love your kernel I asked you.
Thank you!
Click to expand...
Click to collapse
I await feedback if the feature worked
Jonas Cardoso said:
miui pro dont work with my kernel
Click to expand...
Click to collapse
Will you fix it?
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
Features
I/O Schedulers (these were actually added in upstream kernel source)
BFQ
CFQ
DEADLINE
FIOPS
NOOP
ROW [DEFAULT]
ZEN
CPU hotplugs: intelli_plug (ENABLED BY DEFAULT)
CPU thermal control: intellithermal (ENABLED BY DEFAULT)
Governors
conservative
elementalX
intelliactive
interactive
ondemand
powersave
performance
zzmoove [DEFAULT, profile: 3 (ybatext)]
CPU
Support for Multi-Core Power Saving, reduce CPU usage (available in CPU tab of Kernel Adiutor).
Reduced CPU Average-Load drastically (Less CPU-Load=Cool Device=More Battery-Life).
Support userspace CPU voltage controlling
GPU
Support for Adreno Idler algorithm, reduce high GPU frequencies usage for better battery performance
Support for Simple GPU Algorithm
Memory
Support for Adaptive Low Memory Killer (ALMK) (kill any process that cause thrashing scenario)
Support for Kernel Samepage Merging (KSM).
Support for zRAM compression algorithm (updated to upstream Linux 4.8)
Support for LZ4HC (LZ4 high-compression rate) compression algorithm for zRAM
Other tweaks and optimizations
Init.d support
Support Faux Sound Control (use Faux Sound app to set audio gain profiles)
Optimized Integer SQRT. for upto 3x faster operation.
OVERCLOCKED CPU to 2,5GHz
Westwood TCP congestion algorithm (small boost on network speed)
Hacked swappiness up to 200 by using hacks from Samsung kernel sources (default swappiness is 130)
SELinux Permissive (for V4A and etc...)
Disabled some battery-hogging WAKELOCKS
Support zswap for better memory compression
XDA:DevDB Information
RZ Kernel for Sony Xperia Z1 (honami), Kernel for the Sony Xperia Z1
Contributors
remilia15, SuperLamic
Source Code: https://github.com/remilia15/android_kernel_sony_msm8974
Kernel Special Features:
Version Information
Status: Testing
Created 2018-04-04
Last Updated 2018-09-14
Download link: Drive
CHANGELOG
v1.0: Initial release
v1.5: Post #11
v2.0: Post #17
v2.5:
Post #48
Support for stock 14.6.A.1.368: Post #52
v3.0: Post #97
v4.0 [FINAL]: Post #147
Small notes
The kernel is tested on C6902/C6903/C6906 model. Not sure about other Z1 variants (don't confuse with Z1c). Testers are welcome
As written in the thread name, make sure you're on ROMs mentioned in the thread name. Please report if other ROMs work with this kernel
The kernel is based on @SuperLamic's msm8974 kernel source, and other features were cherry-picked from other sources as well. Original credits goes to them
For dt2w, tap 2 fingers at once on your touchscreen (as mentioned in Modified-kernel thread)
Reserved for future usage
Twrp included ?
Any plans for oreo version?
Is it possible to disable dt2w?
I remember way back it was usually done by modifying a file like
echo "1" > /sys/android_touch/ *some dt2w file*
iga64828 said:
Twrp included ?
Click to expand...
Click to collapse
Well, you have to install it separately through FlashTool
pokepokepoke said:
Any plans for oreo version?
Click to expand...
Click to collapse
Maybe, after Oreo gone stable
SUPERUSER said:
Is it possible to disable dt2w?
I remember way back it was usually done by modifying a file like
echo "1" > /sys/android_touch/ *some dt2w file*
Click to expand...
Click to collapse
You can disable it from Kernel Adiutor -> Wake -> DoubleTap2Wake
Or sysfs way:
Code:
echo 0 > /sys/class/input/input1/wakeup_gesture
Sent from my Xperia Z1 using XDA Labs
nice set of features,,,, gonna give it a test
remilia15 said:
The kernel is tested on C6902/C6903 model. Not sure about other Z1 variants (don't confuse with Z1c). Testers are welcome
As written in the thread name, make sure you're on LineageOS 14.1. I haven't tested other N ROMs yet. Please report if other ROMs work with this kernel
The kernel is based on @SuperLamic's msm8974 kernel source, and other features were cherry-picked from other sources. Original credits goes to them
For dt2w, tap 2 fingers at once on your touchscreen (as mentioned in Modified-kernel thread)
Click to expand...
Click to collapse
Bootloops on RR Nougat 7.1.2 (yeah yeah yeah, read the disclaimer on support for other ROMS, just curious to test this kernel). Strange but offline charging works as expected and even booting into TWRP works. But while in TWRP I notice the device temperature begins to rise rapidly, causing it to reboot,,,,,hope this works in future releases. Device: C6902
RZ v1.5 is up! Changes
Implemented power efficient workqueues (thanks to franciscofranco)
Disabled DT2W by default
Enabled multi-core power saving by default
Reverted GPU OC, obviously because it doesn't do anything
Built with UBERTC 4.9
Disabled battery-hogging wakelocks (thanks to franciscofranco)
Enabled intelli_plug and intellithermal by default (you'll need to disable mpdecision from Kernel Adiutor so intelli_plug will work properly)
RZ v1.5 is available on my Drive folder. Please checkout OP for download link!
Cheers,
Confirmed working with latest Carbon N ?
Sent from my Xperia Z1 using XDA Labs
Good work on my c6903 LOS 14.1 SuperLamic.
Nice work. It's working fine on my C6906 running LOS 14.1 from SuperLamic with Magisk installed and working fine too. My phone was charging too slow but now it's fixed.
Hello, remilia15.
Thank you for your work.
This kernel is flash like update.zip in trwp recovery?
Seand1796 said:
Hello, remilia15.
Thank you for your work.
This kernel is flash like update.zip in trwp recovery?
Click to expand...
Click to collapse
Yes, the kernel is packed inside a flashable ZIP, so just flash it through TWRP
RZ v2.0 is up! Changes
Added support for userspace voltage controller (available in Kernel Adiutor)
Added support for Adreno Idler (reduce high GPU frequencies usage due to msm-adreno-tz overhead), and Simple GPU algorithm
Added governors: zzmoove [DEFAULT], elementalX
Disabled mpdecision and thermanager by default (through my own ramdisk implementation, may support other ROMs for sure, as confirmed with Carbon N and LOS N)
Added support for zswap (ported from Samsung msm8974 kernel source)
Added IO schedulers: zen, fiops (default is still ROW)
Added 100MHz GPU step (should reduce battery consumption on light usage)
Added support for Dynamic Fsync (disabled by default), powersuspend driver (default: HYBRID mode)
Reduced CPU standby voltage
Fixed dt2w deep sleep state (it should function properly now)
RZ v2.0 is available on my Drive folder. Please checkout OP for download link!
remilia15 said:
RZ v2.0 is up! Changes
Added support for userspace voltage controller (available in Kernel Adiutor)
Added support for Adreno Idler (reduce high GPU frequencies usage due to msm-adreno-tz overhead), and Simple GPU algorithm
Added governors: zzmoove [DEFAULT], elementalX
Disabled mpdecision and thermanager by default (through my own ramdisk implementation, may support other ROMs for sure, as confirmed with Carbon N and LOS N)
Added support for zswap (ported from Samsung msm8974 kernel source)
Added IO schedulers: zen, fiops (default is still ROW)
Added 100MHz GPU step (should reduce battery consumption on light usage)
Added support for Dynamic Fsync (disabled by default), powersuspend driver (default: HYBRID mode)
Reduced CPU standby voltage
Fixed dt2w deep sleep state (it should function properly now)
RZ v2.0 is available on my Drive folder. Please checkout OP for download link!
Click to expand...
Click to collapse
Hi
thanks for your works buddy
can u make kernel for other roms like RR too?
u can use anykernel :fingers-crossed:
Luncer said:
Hi
thanks for your works buddy
can u make kernel for other roms like RR too?
u can use anykernel :fingers-crossed:
Click to expand...
Click to collapse
I'm using the very first version of AnyKernel with very minimal patching commands
Somehow it's pretty hard for me to adapt to a newer AK version so I decided to write my own noob-friendly ramdisk patching script instead (compatible with all Z1 AOSP boot.img)
My kernel boots currently on LOS N and Carbon N. For RR, idk why it bootloops. Probably need some other kernel commits maybe?
Sent from my Xperia Z1 using XDA Labs
Runs nice..but I needed to flash the stock kernel from superlamic lineage os and then flash this kernel because the phone went in to a bootloop on the sony logo.
Just a reminder to what to do when your next update is coming
edit: no its magisk thats acting up.. wont't boot when installing this after flashing the kernel
Phone is booting with magisk on stock kernel so something is not right.
I don't have more time atm for this so im gonna let it be