Routing a J1 Ace "Recovery is not Seandroid Enforcing" - Samsung Galaxy J Questions & Answers

Hi there!
I've tried to root a Galaxy J1 Ace for my son with Android 5.1.1... unsuccessfully I may add.
I did everything by the book: Installed the last TWRP through Odin, but when I try to go into Recovery Mode, the phone just stays with the Samsung Galaxy J1 Ace logo and a message above in green: "Recovery is not Seandroid Enforcing" and I can't get into Recovery Mode to apply SuperSU.
I've been looking in the forum and other sites and the only thing I've been able to find so far is to make a clean install of the original ROM, which is no guarantee that after trying to install TWRP again I will not face the same problem.
Is there a way to solve this problem.
Thanks in advance!

Related

[Q] Samsung Galaxy Tab 3 8.0 stuck in recovery mode

Hi guys,
This is my first thread. After I rooted my Samsung Galaxy Tab 3 8.0 with Kingo Root and downloaded ChainFire3D , I wanted to install the CF3D driver. So I did that, but during the installation I didn't know that the device was rebooting, so I did a factory reset. And now my Samsung Galaxy Tab 3 8.0 is stuck in recovery mode. So can anyone help me please? I don't know what to do further.
Hi. The fastest way is to reflash your firmware with Odin/reinstall custom rom using recovery (in case you have CWM or similar).

[Q] "No Command" - Root Menu

I have a Samsung Galaxy Tab 3 Neo/Lite SM T-111 and whenever i try to root my device or flash a custom recovery( manually or with odin), after the restart the message "no command" gets displayed and i am directed to the stock recovery screen. I tried to flash the automatic root through odin but still the same result. Can someone suggest something ?
PS - My device is not soft bricked, all functions work properly except for recovery.
Specifications :
Android v 4.2.2
Kernal - Stock (3.4.5 - 2751957 [email protected] #2 )
Hi there,
I'm sorry but I can't find anything relevant to your question/device.
Please wait until mods will move this thread to the device specific forum for more relevant answers.
Stand by

unable to access recovery mode please help

need support on s4 mini duos
i have GT-I9192 i am not able to install recovery mode and i am not able to enter recovery mode, when i try it comes all over the screen red blue green dots. and if i try to start it shows Samsung s4 mini duos GT-I9192 and again restarts continuously. I am able to go to samsung download mode from there i can install recovery and stock rom but it has not changed anything. please help me i dont know what to do. this problem came when i plugged in for battery charge this problem started. sorr for bad english
thanks
amar
krshna.mom147 said:
need support on s4 mini duos
i have GT-I9192 i am not able to install recovery mode and i am not able to enter recovery mode, when i try it comes all over the screen red blue green dots. and if i try to start it shows Samsung s4 mini duos GT-I9192 and again restarts continuously. I am able to go to samsung download mode from there i can install recovery and stock rom but it has not changed anything. please help me i dont know what to do. this problem came when i plugged in for battery charge this problem started. sorr for bad english
thanks
amar
Click to expand...
Click to collapse
You need to give more info if you want someone with i9192 to help. Eg which recovery, which kernal, which ROM, are you using ODIN etc.
What you were running before you tried this flash.
Red, blue green "dots" are probably the Jelly Beans that show when you go to the settings menu like here
http://www.howtogeek.com/121197/4-h...gingerbread-to-jelly-bean/?PageSpeed=noscript
But I am not familiar with this phone as my wife's never had 4.1 installed......
You should be able to cure boot loop by install Jelly Bean via Odin (or later ROM) ...... though if problem arose when you plugged in USB maybe there is a fault with that or USB connector.

My Galaxy Tab 3 P5210 doesn't start !!!

Hi, this is my second post so sorry if this doesn't the place and sorry for my English.
I want ask you for help because my Galaxy Tab 3 P5210 doesn't pass the logo. When I connect the charger, doesn't appear the battery icon , only appears samsung galaxy tab 3 's logo and when I turn on it, the logo is frozen.
I tried unbrick with Odin, with all versions, more than 20 different firmwares, flashing customs recovery ...but nothing. Odin, flash all *.tar.md5 without problem, but when my tablet reboot, appears samsung galaxy tab 3 's logo again. I can't get the system arrives. Neither arrives to recovery ....
I don't know that I can do more. Helpp pleaseee !!!:crying:
I've got the same problem, but no one ever replies!
Flash custom recovery and format all folders and Odin back with stock ROM
Sent from my SM-T211 using Tapatalk

Saving a KNOX-tripped Samsung S4 Mini, stuck at Samsung logo, via non-stock-rom?

My Samsung Galaxy S4 Mini (i9195) went into coma "by itself" (when only charging) one year ago. Since then it is stuck at the white Samsung logo.
KIES can´t get any contact with the phone at all.
When I use Odin to install stock firmware it got stuck on ”aboot.mbn”, and after a minute or two: ”FAIL”. After that the phone doesn´t boot to logo, just says that loading firmware failed, try again, until I load the "pit-file" and the phone boots to Samsung logo again...
Also tried this trick...
[RECOVERY][ROOT] Samsung Galaxy S4 Mini LTE (GT-I9195)
WARNING! ONLY USE THIS ON THE GT-I9195 MODEL! Hello all S4 Mini owners! I'm happy to finally release ClockworkMod recovery and an insecure kernel for the GT-I9195. With these two installed on your device, obtaining root is easy. Attached to...
forum.xda-developers.com
...but it got stuck at "recovery.img", and then "FAIL". but after that experiment (and a new pitfile-loading) the Recovery mode only shows "recovery booting" and "Set Warranty Bit: recovery" but no menu and nothing more happens. I can still use the menu for downloading via Odin. Text in upper left corner:
Odin Mode
Product name: GT-I9195
Current binary: Custom
System status: Official
KNOX Kernel lock: 0x0
KNOX Warranty void: 0x1
CSB-Config-LSB: 0x30
Bootloader AP SWREV: 2
Write protection: Enable
KNOX seems ”tripped” so I guess it´s no longer possible to flash any stock rom:
The flash memory could have died, but even if the phone is nearly nine years old, it is not used much, and I can write at least some bytes to the flash memory.
Is it possible to save a KNOX-tripped phone which gets stuck at Samsung logo via some non-stock-rom? And if so; How?

Categories

Resources