Hi all,
this is the thread to provide you all with the latest Lollipop ROM for the Mediapad M2 10.0 LTE Premium (M2-A01L) device. You can download the ROM my AFH account. If anyone is running a ROM more recent than those mentioned here, please reply in this thread. Also, if you can mention the source from where you downloaded it, please also add that in your reply, and I will update this post accordingly and give you credit for finding it.
This post contains the followin informations:
ROM downloads for the Mediapad M2 10.0
Installation instructions for the ROMs
M2-A01L Marshmallow ROMs
M2-A01L 10.0 LTE Premium - B010:
HUAWEI_MediaPad M2 10.0_M2-A01L_Firmware_Android 5.1.1_EMUI 3.1_V100R001C100B010CUSTC100D001.zip
-
Installation Intructions
1. Flash Stock ROM
Download the current Stock ROM provided above
Unzip the archive and place /dload folder (including *.APP file inside) on you internal or external the SD card.
If you have TWRP installed, flash Stock Recovery:
Download the Stock Recovery from here
Power your device completely off
Connect it to your PC, using a microUSB-cable
Hold Vol- and power the device on
Your device should show the bootloader
Open a CMD on your PC and navigate to your fastboot/adb folder
Flash Stock recovery using the command
Code:
fastboot flash recovery Stock-Recovery-MediaPadM2-10.img
Flash Stock Rom:
Turn the device off and make sure it is detached from your PC
While phone is off press Vol+ + Vol- + Power keys and hold them as long, until you see the following screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The ROM starts flashing automatically and the device will reboot as soon as it has been finished
2. Re-flash TWRP Recovery
Download TWRP Recovery from here
Power your device completely off
Connect it to your PC, using a microUSB-cable
Hold Vol- and power the device on
Your device should show the bootloader
Open a CMD on your PC and navigate to your fastboot/adb folder
Flash Stock recovery using the command
Code:
fastboot flash recovery TWRP-3.1.0-Recovery-MediaPadM2-10.0-LISZT-A01L-A01W.img
3. Root using Magisk
Download latest Magisk from here, or here
Reboot to TWRP Recovery
Copy Magisk.zip onto internal or external SD card
Flash and be happy!
Hope this helps someone
hi all,
Is It a 6.x.x Marshmallow Official Rom?
Is It with new Emui?
Thanks
kakaroth1977 said:
hi all,
Is It a 6.x.x Marshmallow Official Rom?
Is It with new Emui?
Thanks
Click to expand...
Click to collapse
It's the latest ROM for the MediaPad M2 10 LTE. Still Lollipop though.
Sent from my htc_ocnuhl using XDA Labs
5m4r7ph0n36uru said:
It's the latest ROM for the MediaPad M2 10 LTE. Still Lollipop though.
Sent from my htc_ocnuhl using XDA Labs
Click to expand...
Click to collapse
you May change the title to "stock Lollipop"
I find the B011 Rom on a Russian site
kakaroth1977 said:
you May change the title to "stock Lollipop"
Click to expand...
Click to collapse
As there is no Marshmallow out or even at the horizon for the M2 10 this doesn't make any sense imho
Sent from my htc_pmeuhl using XDA Labs
5m4r7ph0n36uru said:
As there is no Marshmallow out or even at the horizon for the M2 10 this doesn't make any sense imho
Sent from my htc_pmeuhl using XDA Labs
Click to expand...
Click to collapse
yes you are right but you write in the title of the thread "Marshmallow"
kakaroth1977 said:
yes you are right but you write in the title of the thread "Marshmallow"
Click to expand...
Click to collapse
Damn sorry for that one. Didn't even notice it.
Corrected thanks for the heads-up!!
Sent from my htc_pmeuhl using XDA Labs
thanks to you for the rom
kakaroth1977 said:
thanks to you for the rom
Click to expand...
Click to collapse
You're welcome. Always happy to provide something useful to the XDA community if I can.
Sent from my htc_pmeuhl using XDA Labs
Not sure if this topic is the right section, but anyway after using the dload method on the linked firmware I both get an update error by the stock recovery and the tablet keeps on a boot loop at Huawei logo.
Any suggestion? I can fastboot-flash mostly anything
M2 801L - English UK Stock Lollipop Firmware
Does anyone have the M2 801L - English UK Stock Lollipop Firmware?
I'm stuck on boot loop. I used TWRP to flash boot.img, and now I got ERROE 10 NO SYSTEM.
I reflashed the stock recovery and tried to flash all the available UPDATE.APP on the internet but didn't get me anywhere.
since it's still under warranty, I'll drop it off.
irock_you said:
I'm stuck on boot loop. I used TWRP to flash boot.img, and now I got ERROE 10 NO SYSTEM.
I reflashed the stock recovery and tried to flash all the available UPDATE.APP on the internet but didn't get me anywhere.
since it's still under warranty, I'll drop it off.
Click to expand...
Click to collapse
Sorry for the late reply. But honestly trying the warranty repair would.habe been my choice as well. Did they help you on warranty if I may ask!?
Mine's away the second time now. First time the eMMC has been corrupted and wasn't working any longer, where they replaced the Mainboard and a new IMEI was given to it. This time the IMEI got erased and read 000000000000000. They received it on friday 2 pm, repaired it and sent it back via UPS the same day. Will arrive on monday. Done on warranty as well.
Never the less this'll be my last Huawei. To many defects within the warranty person and bad update policy.
Sent from my HTC U11 using XDA Labs
TWRP-3.1.0-Recovery-MediaPadM2-10.0-LISZT-A01L-A01W.img
d01h----mediapad m2 10
Thx change success!
5m4r7ph0n36uru said:
It's the latest ROM for the MediaPad M2 10 LTE. Still Lollipop though.
Sent from my htc_ocnuhl using XDA Labs
Click to expand...
Click to collapse
may i know is this EMUI 3.1 or later version ?
Is this later version than V100R001C100B209B005 ?
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NOTICE: Go here for my newer tool here http://forum.xda-developers.com/showthread.php?p=52973530
ABOUTThis is a very simple CMD UI to install the TWRP (Jellybean and Kitkat) for the P6, as well as to revert back to stock recovery. There is also option to unlock bootloader, but I'm not very sure that it works.
Hope this makes flashing TWRP/Stock recoveries easier!
This is my first time making something for xda. I would be excited to hear any feedback or suggestions.
FEATURES
TWRP Installing for Jellybean, Kitkat B506, and OMNI ROM.
Reverting to stock recovery for Jellybean and Kitkat B506.
Entering into recovery.
Unlocking device (untested)
REQUIREMENTS
Unlocked Bootloader (You can use this tool or install B506)
KITKAT B506 Based ROM
OMNI Based ROM
JELLYBEAN Based ROM
DRIVERS FOR HUAWEI P6-U06 or P6-U00
DOWLOADS
TWRP Installer V1.1.3b
TWRP Installer V1.1.3a
TWRP Installer V1.1.2
TWRP Installer V1.1.0
TWRP Installer V1.0.1
TWRP Installer V1.0.0
INSTRUCTIONSHere are the steps:
1. Download file here. http://goo.gl/6nONyf
2. Extract the rar to desktop.
3. Run "TWRP_Installer.exe". I don't believe you need admin settings.
4. And just follow instructions on the screen from there.
WHAT IF MY PHONE WON'T BOOT?Do not worry! Just follow the instructions below!
However, you will have to enter into fastboot mode manually before you use the tool. This is how:
1. Plug in your phone to a computer.
2. Press down power and volume(-) for 10 seconds, and wait for your device to turn off. Do not let go.
3. After you see Huawei logo for 2 seconds, release the power button.
4. After 5 seconds, release the volume (-) button.
5. This will enter into fastboot mode, and then you can continue to use the tool. From there, you would either:
a) Install Stock Kitkat/Jellybean Recovery, b) TWRP Kitkat/Jellybean
6. Enter recovery mode. If you choose stock recovery, download an UPDATE.APP and install the OS likewise. If you choose TWRP, download a custom rom, and install the OS likewise.
CREDITS @surdu, @TeamWin, @tauio111 .
Here is the OP of TWRP. Make sure you thank surdu for his hard work.
http://forum.xda-developers.com/showthread.php?t=2709353
Here is the OP for bootloader unlock. Make sure to thank tauio111.
http://forum.xda-developers.com/showthread.php?p=50741449
Here is the old work that I had posted. This gave me the thought to make the CMD installer.
http://forum.xda-developers.com/showpost.php?p=49986799&postcount=10
And don't forget to thank me of course:laugh:
If you repost my work, make sure to give credits to me.
SCREENSHOTS
CHANGELOG2014-Apr-07 - V 1.0.0
Initial Release
2014-Apr-09 - V 1.0.1
Added Support For Jellybean
Added Bootloader Unlock
Added Boot.img Restore
2014-Apr-12 - V 1.1.0
Removed issue for external dll dependency
Removed .bat file dependency to avoid accidental executing
Move recovery.img, boot.img, adb.exe, fastboot.exe into another folder, easier to find TWRP_Installer.
2014-Apr-14 - V 1.1.2
Updated to newest surdu's 2.7.0.0 TWRP
Included boot.img OMNI and B506 for TWRP internal storage support
Fixed a bug issue with option 5 and 6
2014-Apr-24 - V 1.1.3a
Fixed an issue with option 1
2014-May-5 - V 1.1.3b
Added support to Windows XP
XDA:DevDB Information
CMD TWRP Installer, Tool/Utility for the Huawei Ascend P6
Contributors
bokchoi2020, surdu, tauio111
Version Information
Status: No Longer Updated
Created 2014-07-04
Last Updated 2014-07-04
thx
Curcio said:
thx
Click to expand...
Click to collapse
No problem! If I have time, next update I may include choice to install Jellybean Twrp and Jellybean stock!
OK, Update released!
To 1.0.1! More details in the OP thread!
My Phone is Stuck!
Please help,
My phone is stuck after i accidentally installed the OMNI boot image from this tool on the stock Kitkat B506. The problem is that "TWRP_Installer_1.0.1.exe" was not working, asking for some missing .dll. Then i just double clicked on "omni_boot_kitkat.bat" and without waiting for my input or confirmation, it went ahead and did something. Now i am stuck on the android logo. I don't have TWRP also. Please help me to bring the system back to normal.
-Majrul
majrul said:
Please help,
My phone is stuck after i accidentally installed the OMNI boot image from this tool on the stock Kitkat B506. The problem is that "TWRP_Installer_1.0.1.exe" was not working, asking for some missing .dll. Then i just double clicked on "omni_boot_kitkat.bat" and without waiting for my input or confirmation, it went ahead and did something. Now i am stuck on the android logo. I don't have TWRP also. Please help me to bring the system back to normal.
-Majrul
Click to expand...
Click to collapse
Click the stock_boot_kitkat.bat to revert to stock boot.img.
Or just do
fastboot flash boot boot.img
I will look into the issue with the dll library being missing.
Sent from my P6-U06 using xda app-developers app
bokchoi2020 said:
Click the stock_boot_kitkat.bat to revert to stock boot.img.
Or just do
fastboot flash boot boot.img
I will look into the issue with the dll library being missing.
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
I am unable to, because i am getting this error everytime:
error: device unauthorized. Please check the confirmation dialog on your device.
And there is nothing on the screen except an android logo. I am unable to do anything!
majrul said:
I am unable to, because i am getting this error everytime:
error: device unauthorized. Please check the confirmation dialog on your device.
And there is nothing on the screen except an android logo. I am unable to do anything!
Click to expand...
Click to collapse
Shoot.... but how is that possible?
When you install the omni boot.img, it requires usb debugging enabled, with RSA fingerprint from the computer to be whitelisted.
It installed, so clearly you had the RSA fingerprint whitelisted...
But now when you try to install the stock boot.img now it blacklisted the RSA fingerprint...
Ok, you can give this a shot but I'm not sure if it will work.
1. Get an SD card, put the B506 update on it.
2. Reboot into recovery with power and (+)(-) buttons.
3. Then reinstall the B506 update.
The update should replace the boot.img.
If it still doesn't work, do a factory reset/ partition wipe from the recovery.
I'm sorry for the inconvenience that this may have caused you.
I will look deeply into this issue.
Can u explain more? I don't get it
Sent from my GT-S7562 using xda app-developers app
Thy Boss said:
Can u explain more? I don't get it
Sent from my GT-S7562 using xda app-developers app
Click to expand...
Click to collapse
Basically my exe didn't start on his computer because I didn't compile the program with a static library. I'm going to fix that.
Then he went ahead and tried running one of my scripts, which installed the OMNI kernel. But he was using B506 stock, which then made his device not boot due to different ramdisk config.
I then suggest that he reflash the stock boot.img which I included in another batch file, but then the OMNI kernel asks for permissions for USB debugging.
His phone doesn't boot in the Android UI so he can't access the confirmation box that allows debuging.
He doesn't have TWRP, so he can't flash recovery boot.img that way either.
So now the only solution is to reinstall the ROM via UPDATE.APP.
Sent from my P6-U06 using xda app-developers app
bokchoi2020 said:
Basically my exe didn't start on his computer because I didn't compile the program with a static library. I'm going to fix that.
Then he went ahead and tried running one of my scripts, which installed the OMNI kernel. But he was using B506 stock, which then made his device not boot due to different ramdisk config.
I then suggest that he reflash the stock boot.img which I included in another batch file, but then the OMNI kernel asks for permissions for USB debugging.
His phone doesn't boot in the Android UI so he can't access the confirmation box that allows debuging.
He doesn't have TWRP, so he can't flash recovery boot.img that way either.
So now the only solution is to reinstall the ROM via UPDATE.APP.
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
Followed the steps, got the phone working back again, but unfortunately lost all the phone memory data like call logs and sms. I will request you to please modify this program so that it doesn't installs anything without user confirmation.
I was sincerely looking for such a tool. I thank you for your effort, i am sure you will take care of the changes immediately.
majrul said:
Followed the steps, got the phone working back again, but unfortunately lost all the phone memory data like call logs and sms. I will request you to please modify this program so that it doesn't installs anything without user confirmation.
I was sincerely looking for such a tool. I thank you for your effort, i am sure you will take care of the changes immediately.
Click to expand...
Click to collapse
Yes, thanks for your understanding. For next release I will try to integrate the bat files into the exe so no more accidental installation by the end user will occur. Maybe have a confirmation before the install.
majrul said:
Followed the steps, got the phone working back again, but unfortunately lost all the phone memory data like call logs and sms. I will request you to please modify this program so that it doesn't installs anything without user confirmation.
I was sincerely looking for such a tool. I thank you for your effort, i am sure you will take care of the changes immediately.
Click to expand...
Click to collapse
Ok, Update will be soon.
Changes include .exe working without external dll support, and no more bat files.
bokchoi2020 said:
Ok, Update will be soon.
Changes include .exe working without external dll support, and no more bat files.
Click to expand...
Click to collapse
That's great. Really appreciate your efforts. I am waiting to downloading it again..
Ok, I just updated it to 1.10! If there are any issues, please tell me!
Changes include removing the .bat files and making the .exe non-dependant on external .dll libraries.
The images are put into a sources folder to make using the tool more easier for end user.
bokchoi2020 said:
Ok, I just updated it to 1.10! If there are any issues, please tell me!
Changes include removing the .bat files and making the .exe non-dependant on external .dll libraries.
The images are put into a sources folder to make using the tool more easier for end user.
Click to expand...
Click to collapse
Yes twrp.exe work good. Not any error this time.
bokchoi2020 said:
Ok, I just updated it to 1.10! If there are any issues, please tell me!
Changes include removing the .bat files and making the .exe non-dependant on external .dll libraries.
The images are put into a sources folder to make using the tool more easier for end user.
Click to expand...
Click to collapse
Wow. Works perfect! Thanks a lot once again for such a nice tool!
Super travail
Un grand merci pour ce bon boulot , sa marche nickel , continu comme sa : O: O: O
olhamike said:
Un grand merci pour ce bon boulot , sa marche nickel , continu comme sa : O: O: O
Click to expand...
Click to collapse
Pas de probleme!
Desole si mon francais n'est pas bon.
Sent from my P6-U06 using xda app-developers app
Works fine for me and solved my problems.
Absolutely an useful application, thanks alot bro
Hey friends.
Update 19 sept. 2016 Cyanogenmod 13 available http://forum.xda-developers.com/android/general/cyanogenmod-13-lenovo-k4-note-t3464788
*
Update:Lenovo k4 Note marshmallow twrp recovery
Check here http://forum.xda-developers.com/k4-note/development/lenovo-k4-note-marshmallow-twrp-root-t3368937 thanks to @ramisumi
Update: successful in installing custom recovery as well as unlocking bootloader
Heres the tutorial http://forum.xda-developers.com/android/general/k4-note-bootloader-unlock-twrp-t3346546#post66071541
Since the device has not its own forum till then I tried to join all the discussions for our Lenovo Vibe K4 Note at one platform.
Meanwhile i will start from its rooting process heres the tutorial for it
http://forum.xda-developers.com/android/help/root-lenovo-vibe-k4-note-t3313481 -oh yes credits for post goes to me but the method was found by Rootandroidz team-Thanks
Now while trying to root some friends may have done something to system folder
So i bring most needed thing -The Stock Rom heres it
http://forum.xda-developers.com/general/general/stock-rom-lenovo-k4-note-t3312345 -again thanks to @Shakib123 for valuable post and RootAndroidz for stock rom.
Ok now comes the valuable OTA updates heres it
http://forum.xda-developers.com/android/general/ota-captured-vibe-k4-note-t3310282 -thanks to @abhish3k9 and to me also for some updates.
You may also be interested in Installing SuperSU & Xposed- oh yes its possible. Heres it
http://forum.xda-developers.com/android/help/lenovo-k4-note-xposed-supersu-t3335732/ -Thanks to me for the post ,Rovo89 for Xposed, chainfire for flashfire
heres the discussion thread for k4 note recovery
http://forum.xda-developers.com/android/help/lenovo-vibe-k4-note-recovery-t3310722 -thanks to @shameet for creating valuable thread.
Discussions are on , join them.
This thread is to join all the discussions.
If you don't like twrp or flashfire method you can try installing xposed via this method
http://forum.xda-developers.com/android/general/how-to-install-xposed-framework-lenovo-t3363786 thanks to @Krishnas096
All credits and links goes to the original thread makers.
Press thanks button�� if helped.
UPDATE: official Marshmallow update for lenovo k4 note has started rolling out.
http://phonedl.ota.lenovomm.com/dls...OW_TO_A7010a48_S202_160316_ROW_WCB5490CE7.zip
UPDATE 2: Bootloader after marshmallow update can be unlocked fine
Heres it http://forum.xda-developers.com/gen...novo-k4-note-bootloader-t3343864#post66010147
Reserved 3
Reserved 2
Reserved 1
Thanks for your helpful information
Android m for Lenovo K4 note link :http://www.droidfull.com/2016/03/k4-note-update.html?m=1
Sent from my Lenovo A7010a48 using XDA Premium 4 mobile app
Is it official update ??
Vcsheel said:
Is it official update ??
Click to expand...
Click to collapse
Yes, source is from Lenovo. but not for India
Sent from my Lenovo A7010a48 using XDA Premium 4 mobile app
Yes friends its confirmed official marshmallow update has started rolling out. My friend's device has asked about new update available of about 1.4gb. But i am one update behind him so didn't got update . but i got the link from his mobile here it is
http://phonedl.ota.lenovomm.com/dls...OW_TO_A7010a48_S202_160316_ROW_WCB5490CE7.zip
Mirror https://userscloud.com/c13b2auv6tjw
check this out
I came across this link on fb, and this guy says he has flashed the above rom from that link,could some one verify on how it could be done for those who have rooted with kingroot.
Thanks in advance.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i have installed the MM update but got back to 5.1 i cant live without root lol
waiting till it can be rooted
crazylife said:
i have installed the MM update but got back to 5.1 i cant live without root lol
waiting till it can be rooted
Click to expand...
Click to collapse
Sorry bro but did you tried fastboot oem unlock -may be lenovo had allowed to unlock it(but chances are 0.1/100)
Did also kingroot not worked?
gursewak.10 said:
Sorry bro but did you tried fastboot oem unlock -may be lenovo had allowed to unlock it(but chances are 0.1/100)
Did also kingroot not worked?
Click to expand...
Click to collapse
Yes was trying kingroot but no succes
And dont want to unlock bootloader now maybe they can root mm without unlocking
Hope soon as they said
crazylife said:
i have installed the MM update but got back to 5.1 i cant live without root lol
waiting till it can be rooted
Click to expand...
Click to collapse
Did anyone find a way to flash MM update on a rooted 5.1 k4 note without flashing the stock rom again?
---------- Post added at 10:24 AM ---------- Previous post was at 10:12 AM ----------
priyank.g said:
Hello guys!
I flashed Marshmallow for the K4 note from http://www.techolite.com/35528/lenovo-k4-note-marshmallow-6-0-update-official.html and it works smoothly with some bugs here and there.
Okay so coming to the bootloader unlock part,
After flashing Marshmallow, which definitely works,
Enable Developer Options in the Setting by tapping on 'Build Number' under About Phone in settings in Device Information
Then go back
Now you'll see a new option called 'Developer Options'
Click on it
Check for 'Enable OEM Unlock'
then move the switch to 'ON'
Enable USB Debugging
Connect your device to the PC
then open command prompt
navigate to adb(You need adb and fastboot)
now under command prompt type 'adb reboot-bootloader'
now your phone will reboot to Fastboot Mode
Now in CMD type 'fastboot OEM Unlock'
then on your device,
Press the 'Volume UP button'
your device will be formatted and will reboot to fastboot again.
Press and hold the Power button and it will shut down and then press and hold again and your device will start
NOTE:-This Bootloader unlock must be performed by advanced users, Also the Marshmallow ROM can't be rooted using kingroot Thats the only downside.. But still..
I tested this 'RIGHT NOW' and just typed this thread in case a developer can now create ROMs and stuff.
This is my first 'Development Related thread' so if this isn't the right place to place it, please move it if necessary
Do press THANKS if this helped you in any way.
Click to expand...
Click to collapse
grusewak.10 add this thread link to your post, Thanks
http://forum.xda-developers.com/gen...novo-k4-note-bootloader-t3343864#post66010147
gursewak.10 said:
UPDATE: official Marshmallow update for lenovo k4 note has started rolling out.
http://phonedl.ota.lenovomm.com/dls...OW_TO_A7010a48_S202_160316_ROW_WCB5490CE7.zip
Mirror https://userscloud.com/c13b2auv6tjw
Click to expand...
Click to collapse
Sir can you please list the bugs if any present in marshmallow update..
kiran2508 said:
Did anyone find a way to flash MM update on a rooted 5.1 k4 note without flashing the stock rom again?
---------- Post added at 10:24 AM ---------- Previous post was at 10:12 AM ----------
grusewak.10 add this thread link to your post, Thanks
http://forum.xda-developers.com/gen...novo-k4-note-bootloader-t3343864#post66010147
Click to expand...
Click to collapse
Yeah sure
But could you share its screenshot or a pic by other phone
Just do this
Connect your bootloader unlocked phone to pc
Usb debugging on
In cmd type adb rebbot bootloader
Now in fastboot mode type
fastboot getvar all
Now provide pic of the result of this command.
I recommend adding a text of your name on pic so to avoid other's claim but don't place any text to hide any info other than IMEI.
Good news friends unlocked boot loader in lollipop ROM and installed twrp recovery and it worked.
Sadly phone after 3-4 boots got stucked in bootloop and had to reflash stock ROM.
So I think the days are very near for our phone with custom recovery installed.
The countdown has started friends.
gursewak.10 said:
Good news friends unlocked boot loader in lollipop ROM and installed twrp recovery and it worked.
Sadly phone after 3-4 boots got stucked in bootloop and had to reflash stock ROM.
So I think the days are very near for our phone with custom recovery installed.
The countdown has started friends.
Click to expand...
Click to collapse
How did you do that in lollipop rom?
Sent from my Lenovo A7010a48 using XDA Premium 4 mobile app
...in Japan for now.
Source:
http://prtimes.jp/main/html/rd/p/000000166.000002531.html
http://tabletmonkeys.com/android-6-0-update-rolls-out-to-huawei-mediapad-m2-8-0-from-november-7/
SeBoLeX said:
...in Japan for now.
Source:
http://prtimes.jp/main/html/rd/p/000000166.000002531.html
http://tabletmonkeys.com/android-6-0-update-rolls-out-to-huawei-mediapad-m2-8-0-from-november-7/
Click to expand...
Click to collapse
Thanks, nice and good info
Nice! Looking forward to seeing it here.
Hello,
Is it ok to update via the update function on the device, even the mediapad has unlocked bootloader and twrp?
Are there any precautions?
Thanks
Sent from my HUAWEI M2-801L using XDA-Developers mobile app
Demianis said:
Hello,
Is it ok to update via the update function on the device, even the mediapad has unlocked bootloader and twrp?
Are there any precautions?
Thanks
Click to expand...
Click to collapse
An OTA update always ships with a new firmware as well. I'm running, and ran, a lot of devices, using TWRP. This I'm really sure that it still is admit always has been: TWRP won't be able to flash the firmware part. Sometimes the ROM update part can be flashed using TWRP, but in general a stock recovery and stock untouched system image unneeded to update through the build in update functionality.
Sent from my htc_pmeuhl using XDA Labs
5m4r7ph0n36uru said:
An OTA update always ships with a new firmware as well. I'm running, and ran, a lot of devices, using TWRP. This I'm really sure that it still is admit always has been: TWRP won't be able to flash the firmware part. Sometimes the ROM update part can be flashed using TWRP, but in general a stock recovery and stock untouched system image unneeded to update through the build in update functionality.
Sent from my htc_pmeuhl using XDA Labs
Click to expand...
Click to collapse
Thanks a lot for the helpful information.
So i'll find a way to prepare myself ?
It's actually the first time in 5 years, that I end up with a device where there's no custom rom available.
Sent from my HUAWEI M2-801L using XDA-Developers mobile app
SeBoLeX said:
...in Japan for now.
Source:
http://prtimes.jp/main/html/rd/p/000000166.000002531.html
http://tabletmonkeys.com/android-6-0-update-rolls-out-to-huawei-mediapad-m2-8-0-from-november-7/
Click to expand...
Click to collapse
Thanks this update:good:, finally its comming..
anyone found a downloadable image of the firmware yet? It's two weeks since official release now, but i can't find the image anywhere.
I've been looking like a crazy person also...
http://consumer.huawei.com/jp/support/downloads/index.htm
Japanese site.
http://m.huawei.com/enmobile/consumer/support/downloads/index.htm
English site.
Maybe if we find a Japanese 5.1.1 firmware, flash it and manually search for update it might work . Can't find one though... :/
Nothing found so far, I have looked for the image too but nothing...hope to find it, or we get the OTA update soon.
One guy in a german forum posted, that he got the update yesterday. So we are maybe not far away.
http://www.android-hilfe.de/thema/android-6-0-update-huawei-mediapad-m2-8-0.802720/
Demianis said:
One guy in a german forum posted, that he got the update yesterday. So we are maybe not far away.
http://www.android-hilfe.de/thema/android-6-0-update-huawei-mediapad-m2-8-0.802720/
Click to expand...
Click to collapse
as he wrote that he had the korean b019 installed before, this sadly gives no clue about the release in other regions. :\
So the options are being patient and hope that the rollout will continue soon. Oooor....just put the korean version on my tab (which hopefully has english language sets anyways), fetch the update and up it to my GDrive. Oh the struggle....
Ah... So Korean or Japanese...
I live in Myanmar and the internet here is so crappy terrible.. Won't be able to download the big files anytime soon.. Would love to test it. :/
But think of how happy you would make us all by being able to upload it to gdrive
i won't find the time today, but i think i might play around a bit with those foreign Firmware installations tomorrow and see how far i get. I really love this piece of hardware, but 5.1.1 is just way outdated and i strongly hope that 6.0 also boosts the overall speed a bit.
Oooooh I hope that they have added multi users and the Screen Pinning feature, which is a Lollipop feature, that they for some reason also have removed.
hmm....i am bit shy to install the downloaded asian rom since i got the Wifi only version (m2-801w) of the tab and all b019-roms i can find are for the LTE version (801l). Anyone knows a download location for 801w b019?
[edit] nevermind, found it on needrom. Just downloading...
So here we are: https://drive.google.com/open?id=0B765h62rQ81INUp0WHVvUFh5VzA
Steps i took, coming from a rooted 5.1.1 (version CUST<something>D003 i think)
- download 5.1.1 Asia release B019 from needrom (M2-801w-V100R001C233B019.zip)
- extract all img files with Huawei Extractor to a dedicated folder
- uninstall superSU
- fastboot to bootloader
- fastboot flash system, recovery and boot img from the extracted file
- reboot
- launch Update Tool
- be scared by some weird asian Update Notes
- install anyway
- success
after installation, the system language is still set to german (as it was on my tab before), so there seems to be no need to work through korean menus for setting the localization back.
You can surely skip those steps above and put the update.zip directly into your /dload folder or on the external sd card, but remember that you need a stock rom for it to work. If you tempered /system or had some custom recovery, you should fastboot flash the extracted img files directly.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Damm, i have M2-801L 5.1.1 stock rom and nothing update :crying:
toxic_garden said:
So here we are: https://drive.google.com/open?id=0B765h62rQ81INUp0WHVvUFh5VzA
Steps i took, coming from a rooted 5.1.1 (version CUST<something>D003 i think)
- download 5.1.1 Asia release B019 from needrom (M2-801w-V100R001C233B019.zip)
- extract all img files with Huawei Extractor to a dedicated folder
- uninstall superSU
- fastboot to bootloader
- fastboot flash system, recovery and boot img from the extracted file
- reboot
- launch Update Tool
- be scared by some weird asian Update Notes
- install anyway
- success
after installation, the system language is still set to german (as it was on my tab before), so there seems to be no need to work through korean menus for setting the localization back.
You can surely skip those steps above and put the update.zip directly into your /dload folder or on the external sd card, but remember that you need a stock rom for it to work. If you tempered /system or had some custom recovery, you should fastboot flash the extracted img files directly.
Click to expand...
Click to collapse
MAN you rock!!! Great job!!!
Shame its not 801L but great job! thanks for sharing
toxic_garden said:
So here we are: https://drive.google.com/open?id=0B765h62rQ81INUp0WHVvUFh5VzA
Steps i took, coming from a rooted 5.1.1 (version CUST<something>D003 i think)
- download 5.1.1 Asia release B019 from needrom (M2-801w-V100R001C233B019.zip)
- extract all img files with Huawei Extractor to a dedicated folder
- uninstall superSU
- fastboot to bootloader
- fastboot flash system, recovery and boot img from the extracted file
- reboot
- launch Update Tool
- be scared by some weird asian Update Notes
- install anyway
- success
after installation, the system language is still set to german (as it was on my tab before), so there seems to be no need to work through korean menus for setting the localization back.
You can surely skip those steps above and put the update.zip directly into your /dload folder or on the external sd card, but remember that you need a stock rom for it to work. If you tempered /system or had some custom recovery, you should fastboot flash the extracted img files directly.
Click to expand...
Click to collapse
So just download the zip and local update ? Im on stock 801-w no modifications
Guys there are too many threads on this topic but nothing makes everything clear.
So please share your thoughts here.
Present scenario
I'm on the Indian ROM ZUI 2.0.093
I just got the handset with this ROM installed.
When I check for updates this is what I get.
Screenshot attached
Please tell me if flashing this CN ROM will get me OTA and warranty services.
Z2131_CN_OPEN_USER_Q01002.1_M_ZUI_1.9.044_ST_160523_qpst.rar
Qn: after I flash the this CN ROM,
1.How will I get Google services.
2. Should I continue to use this CN Rom and do OTA with VPN enabled or
Flash any specific Indian ROM in any specific method to get the services.
I think the seller has unlocked the bootloader.
But there is no custom recovery installed and there is no SuperSU and not sure if the bootloader is locked or unlocked.
(I'll check on this and will update the scenario)
Please help
Also please provide links to flashing guide (CN Rom) qpst qfil if possible.
Thanks in advance.
Sent from my ZUK Z2132 using Tapatalk
Updater screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my ZUK Z2132 using Tapatalk
rameeskr said:
Updater screenshot
Sent from my ZUK Z2132 using Tapatalk
Click to expand...
Click to collapse
- Flash Chinese stock ROM 1.9.044 using QFIL
- Flash Indian Stock ROM 2.0.093
- Install FlyVPN in your phone after booting the previously insatlled Indian ROM.
- Connect to any China server using FlyVPN
- Open updater app and you'll see an update to Version 2.0.133, hit update and let the phone update.
- AFter update, connect to Chinese server through FlyVPN again, and open the updater app again.
- You should see an update to Version 2.5.104 this time, hit update and let the phone download and install the update.
rockingpiyush13 said:
- Flash Chinese stock ROM 1.9.044 using QFIL
- Flash Indian Stock ROM 2.0.093
- Install FlyVPN in your phone after booting the previously insatlled Indian ROM.
- Connect to any China server using FlyVPN
- Open updater app and you'll see an update to Version 2.0.133, hit update and let the phone update.
- AFter update, connect to Chinese server through FlyVPN again, and open the updater app again.
- You should see an update to Version 2.5.104 this time, hit update and let the phone download and install the update.
Click to expand...
Click to collapse
Thanks mate.
Can you please give link to download the indian stock rom 2.0.093.
Thanks
Sent from my ZUK Z2132 using Tapatalk
rameeskr said:
Thanks mate.
Can you please give link to download the indian stock rom 2.0.093.
Thanks
Sent from my ZUK Z2132 using Tapatalk
Click to expand...
Click to collapse
ZUI_2.0.093_ST
There you go!
Got it.
And is successful flash done.
I'm receiving OTA through china VPN though very slow .
But the Nougat OTA 2.5.104ST is failing (3 times).
I think I'll stick with marshmallow for a while since the 2.0.133 build is just fine
Sent from my ZUK Z2132 using Tapatalk
rameeskr said:
Got it.
And is successful flash done.
I'm receiving OTA through china VPN though very slow .
But the Nougat OTA 2.5.104ST is failing (3 times).
I think I'll stick with marshmallow for a while since the 2.0.133 build is just fine
Sent from my ZUK Z2132 using Tapatalk
Click to expand...
Click to collapse
so u got same stock n regained warranty back??
romanpatel said:
so u got same stock n regained warranty back??
Click to expand...
Click to collapse
Yes, same question in my mind for @rameeskr
I just got this phone and before rooting wanted to be sure.
mGforCe said:
Yes, same question in my mind for @rameeskr
I just got this phone and before rooting wanted to be sure.
Click to expand...
Click to collapse
I got the warranty back. You're safe to root. Cheers
sammessi10 said:
I got the warranty back. You're safe to root. Cheers
Click to expand...
Click to collapse
one last query,
Can you pls tell us how did you know that you got warranty back?
abhimanyu.singh said:
one last query,
Can you pls tell us how did you know that you got warranty back?
Click to expand...
Click to collapse
After you unlock your bootloader, the phone shows a message on boot stating that you unlocked your bootloader. This shows that your warranty is void. After flashing stock ROM through QPST, you no longer get this message. You get your warranty back.
How to root and flash through QPST
jiteshsr said:
flash through QPST
Click to expand...
Click to collapse
Search in "Guides" section.
jiteshsr said:
How to root
Click to expand...
Click to collapse
Via TWRP. Search in "Guides" too.
Thanks
Getting its easy way
Flash any zui version like 2.0.93 with mi-flash or qpst .
Then go to update app and clear it's data ( turn on mobile data or wifi ) .you will receive update notification in notifications .
Update it .
Again after updating clear the updater app's data .
You will get ota fine .
sammessi10 said:
After you unlock your bootloader, the phone shows a message on boot stating that you unlocked your bootloader. This shows that your warranty is void. After flashing stock ROM through QPST, you no longer get this message. You get your warranty back.
Click to expand...
Click to collapse
Take a look at below post, it says otherwise:
https://forums.lenovo.com/t5/Moto-G...locking-Bootloader-void-warranty/td-p/3546705
ams73 said:
Take a look at below post, it says otherwise:
https://forums.lenovo.com/t5/Moto-G...locking-Bootloader-void-warranty/td-p/3546705
Click to expand...
Click to collapse
ZUK isn't Moto. Read the mail that you get when you requested the bootloader unlock image
sammessi10 said:
ZUK isn't Moto. Read the mail that you get when you requested the bootloader unlock image
Click to expand...
Click to collapse
ZUK, Lenovo, Moto all belong to Lenovo now and the unlocking process is the same for all of them.
If what you're claiming is correct then that's a great news.
ams73 said:
ZUK, Lenovo, Moto all belong to Lenovo now and the unlocking process is the same for all of them.
If what you're claiming is correct then that's a great news.
Click to expand...
Click to collapse
Oppo, Vivo and OP all are owned by the same company.. they do have difference..
sammessi10 said:
Oppo, Vivo and OP all are owned by the same company.. they do have difference..
Click to expand...
Click to collapse
Sure, please refer to the screen shot below, if the 2nd command output is all "false" after reverting to stock, only then probably warranty can be reclaimed. (of course unless they maintain a registry of unlock_bootloader images issued phones). :good:
[SOLVED] How to apply OTA update with TWRP & Magisk root? Apply latest Factory image
I have Xiaomi Mi Mix 2 with TWRP & latest Magisk 14.0 and Magisk Manager 5.4.3. Running MIUI 9.1 Global Stable 9.1.1.0. It is working great! I was just notified of an OTA update 9.1.2.0 from Xiaomi. How do I apply it without losing data & root? Thanks!
Edit - [SOLVED] see this post https://forum.xda-developers.com/showpost.php?p=74706923&postcount=8
Same question here, I am on Global beta 7.11.6 and want to Update to 7.12.1 but Update doesnt work because twrp is installed as recovery?
Normally for an OTA to be installed it needs the stock recovery otherwise it will fail during checks. So you would have to flash stock recovery and then you could take or flash OTA then you would have to re-root and flash TWRP
Sent from my [device_name] using XDA-Developers Legacy app
jr313 said:
Normally for an OTA to be installed it needs the stock recovery otherwise it will fail during checks. So you would have to flash stock recovery and then you could take or flash OTA then you would have to re-root and flash TWRP
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
OK. Thanks. So best would be to wait until factory image of 9.1.2.0 is available and flash it over the top of current via TWRP?
I'm remembering a tool from when I had Nexus 5 called FlashFire. Wonder if that would work?
colorado_al said:
OK. Thanks. So best would be to wait until factory image of 9.1.2.0 is available and flash it over the top of current via TWRP?
I'm remembering a tool from when I had Nexus 5 called FlashFire. Wonder if that would work?
Click to expand...
Click to collapse
Yeah you could do that or wait for one of the developer to update their factory rom to flash over top. I just checked out the flash fire app and it gave a warning about Xiaomi devices not tested to use caution if you want to try
Sent from my [device_name] using XDA-Developers Legacy app
jr313 said:
Yeah you could do that or wait for one of the developer to update their factory rom to flash over top. I just checked out the flash fire app and it gave a warning about Xiaomi devices not tested to use caution if you want to try
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
Looks like global ROM is available here:
http://en.miui.com/download-334.html
Version: V9.1.2.0.NDEMIEI (MIUI9)
Has anyone a stock recovery for me please?
OK. I found this and it worked great!
https://dhananjaytech.com/flash-sto...evice-using-twrp-recovery-or-fastboot-method/
Thanks to Chinmay Dhumal for the tutorial which you can see here:
https://youtu.be/oUUzxYHV_ac
DL the latest stock ROM from here:
http://en.miui.com/download-334.html
DL lazyflasher-no-verity-opt-encrypt.zip by clicking on the download arrow on the top right here:
https://drive.google.com/file/d/0ByWEieei-0nyMTR4R0dxWk9BTms/view
DL Magisk from here:
http://magiskmanager.com/Magisk/Magisk-v14.0.zip
Copy all 3 to your storage on your phone.
Boot into TWRP by powering off your phone and then holding volume up and power until MI splashscreen appears
Then navigate to Wipe and click Advanced wipe.
Check Cache and Davlik/ART Cache and wipe them
Then back out to the main TWRP screen and choose Install
Then flash the new ROM that you downloaded from Xiaomi MIUI page
Then flash Magisk (Or SuperSU if that is what you use)
Then flash lazyflasher-no-verity-opt-encrypt.zip
Then reboot to system
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
In new update notification page, from top right ... I choose download update, the next morning it automatically reboot into twrp and wait my password for decryption , then the new update was applied.
Sent from my Mi MIX 2 using Tapatalk 2
capcase said:
In new update notification page, from top right ... I choose download update, the next morning it automatically reboot into twrp and wait my password for decryption , then the new update was applied
Click to expand...
Click to collapse
Did you keep root? And now your device says 9.1.2.0?
9.1.2, it seems I lost root
Sent from my Mi MIX 2 using Tapatalk 2
capcase said:
9.1.2, it seems I lost root
Sent from my Mi MIX 2 using Tapatalk 2
Click to expand...
Click to collapse
Very interesting.
I'm surprised that the OTA installed on a rooted device with TWRP recovery. That will usually not work.
Thanks!
capcase said:
In new update notification page, from top right ... I choose download update, the next morning it automatically reboot into twrp and wait my password for decryption , then the new update was applied.
Sent from my Mi MIX 2 using Tapatalk 2
Click to expand...
Click to collapse
and what is the password? is the Xiaomi account one?
brainvision said:
and what is the password? is the Xiaomi account one?
Click to expand...
Click to collapse
Whatever you use to login to your phone
colorado_al said:
Whatever you use to login to your phone
Click to expand...
Click to collapse
Mmm.. so the one of the Xiaomi account?
Inviato dal mio Mi MIX 2 utilizzando Tapatalk
brainvision said:
Mmm.. so the one of the Xiaomi account?
Inviato dal mio Mi MIX 2 utilizzando Tapatalk
Click to expand...
Click to collapse
No, the password used to unlock your phone after one normal boot, so of course not one schema.
If you have Schema, you must change Schema system by password system...
El Philou said:
No, the password used to unlock your phone after one normal boot, so of course not one schema.
If you have Schema, you must change Schema system by password system...
Click to expand...
Click to collapse
Thanks for your reply. Now I know it was obvious but if you consider that this is my first Xiaomi device you'll understand my question.
Would you please link me something relevant about how to start modding in mix 2 that is not in OP right now? It would really help me.. I know it's possible to find many guides by googling but you know, something suggested by an expert user is always better than the first one found online
Thanks a lot! [emoji106]
Inviato dal mio Mi MIX 2 utilizzando Tapatalk
colorado_al said:
OK. I found this and it worked great!
https://dhananjaytech.com/flash-sto...evice-using-twrp-recovery-or-fastboot-method/
Thanks to Chinmay Dhumal for the tutorial which you can see here:
https://youtu.be/oUUzxYHV_ac
DL the latest stock ROM from here:
http://en.miui.com/download-334.html
DL lazyflasher-no-verity-opt-encrypt.zip by clicking on the download arrow on the top right here:
https://drive.google.com/file/d/0ByWEieei-0nyMTR4R0dxWk9BTms/view
DL Magisk from here:
http://******************/Magisk/Magisk-v14.0.zip
Copy all 3 to your storage on your phone.
Boot into TWRP by powering off your phone and then holding volume up and power until MI splashscreen appears
Then navigate to Wipe and click Advanced wipe.
Check Cache and Davlik/ART Cache and wipe them
Then back out to the main TWRP screen and choose Install
Then flash the new ROM that you downloaded from Xiaomi MIUI page
Then flash Magisk (Or SuperSU if that is what you use)
Then flash lazyflasher-no-verity-opt-encrypt.zip
Then reboot to system
Click to expand...
Click to collapse
New Magisk is here for latest ver:
magiskmanager(dot)com
HI,
I have a redmi5+ rooted. I use luckypatcher (i applied some patchs to some apps) and i have installed once BusyBox (didn't do anything in special).
I want to know if it is secure to flash the full update?
PS: how do I confirm if the system files and vendor are ok to proceed?
Thanks
Thanks for this guide.