Develop Bugs

[ROM][STOCK][B010][M2 10.0 LTE] M2-A01L LTE Premium - Stock Lollipop ROM B010

Hi all,
this is the thread to provide you all with the latest Lollipop ROM for the Mediapad M2 10.0 LTE Premium (M2-A01L) device. You can download the ROM my AFH account. If anyone is running a ROM more recent than those mentioned here, please reply in this thread. Also, if you can mention the source from where you downloaded it, please also add that in your reply, and I will update this post accordingly and give you credit for finding it.
This post contains the followin informations:
ROM downloads for the Mediapad M2 10.0
Installation instructions for the ROMs

M2-A01L Marshmallow ROMs
M2-A01L 10.0 LTE Premium - B010:
HUAWEI_MediaPad M2 10.0_M2-A01L_Firmware_Android 5.1.1_EMUI 3.1_V100R001C100B010CUSTC100D001.zip
-

Installation Intructions
1. Flash Stock ROM
Download the current Stock ROM provided above
Unzip the archive and place /dload folder (including *.APP file inside) on you internal or external the SD card.
If you have TWRP installed, flash Stock Recovery:
Download the Stock Recovery from here
Power your device completely off
Connect it to your PC, using a microUSB-cable
Hold Vol- and power the device on
Your device should show the bootloader
Open a CMD on your PC and navigate to your fastboot/adb folder
Flash Stock recovery using the command
Code:
fastboot flash recovery Stock-Recovery-MediaPadM2-10.img
Flash Stock Rom:
Turn the device off and make sure it is detached from your PC
While phone is off press Vol+ + Vol- + Power keys and hold them as long, until you see the following screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The ROM starts flashing automatically and the device will reboot as soon as it has been finished
2. Re-flash TWRP Recovery
Download TWRP Recovery from here
Power your device completely off
Connect it to your PC, using a microUSB-cable
Hold Vol- and power the device on
Your device should show the bootloader
Open a CMD on your PC and navigate to your fastboot/adb folder
Flash Stock recovery using the command
Code:
fastboot flash recovery TWRP-3.1.0-Recovery-MediaPadM2-10.0-LISZT-A01L-A01W.img
3. Root using Magisk
Download latest Magisk from here, or here
Reboot to TWRP Recovery
Copy Magisk.zip onto internal or external SD card
Flash and be happy!
Hope this helps someone

hi all,
Is It a 6.x.x Marshmallow Official Rom?
Is It with new Emui?
Thanks

kakaroth1977 said:
hi all,
Is It a 6.x.x Marshmallow Official Rom?
Is It with new Emui?
Thanks
Click to expand...
Click to collapse
It's the latest ROM for the MediaPad M2 10 LTE. Still Lollipop though.
Sent from my htc_ocnuhl using XDA Labs

5m4r7ph0n36uru said:
It's the latest ROM for the MediaPad M2 10 LTE. Still Lollipop though.
Sent from my htc_ocnuhl using XDA Labs
Click to expand...
Click to collapse
you May change the title to "stock Lollipop"
I find the B011 Rom on a Russian site

kakaroth1977 said:
you May change the title to "stock Lollipop"
Click to expand...
Click to collapse
As there is no Marshmallow out or even at the horizon for the M2 10 this doesn't make any sense imho
Sent from my htc_pmeuhl using XDA Labs

5m4r7ph0n36uru said:
As there is no Marshmallow out or even at the horizon for the M2 10 this doesn't make any sense imho
Sent from my htc_pmeuhl using XDA Labs
Click to expand...
Click to collapse
yes you are right but you write in the title of the thread "Marshmallow"

kakaroth1977 said:
yes you are right but you write in the title of the thread "Marshmallow"
Click to expand...
Click to collapse
Damn sorry for that one. Didn't even notice it.
Corrected thanks for the heads-up!!
Sent from my htc_pmeuhl using XDA Labs

thanks to you for the rom

kakaroth1977 said:
thanks to you for the rom
Click to expand...
Click to collapse
You're welcome. Always happy to provide something useful to the XDA community if I can.
Sent from my htc_pmeuhl using XDA Labs

Not sure if this topic is the right section, but anyway after using the dload method on the linked firmware I both get an update error by the stock recovery and the tablet keeps on a boot loop at Huawei logo.
Any suggestion? I can fastboot-flash mostly anything

M2 801L - English UK Stock Lollipop Firmware
Does anyone have the M2 801L - English UK Stock Lollipop Firmware?

I'm stuck on boot loop. I used TWRP to flash boot.img, and now I got ERROE 10 NO SYSTEM.
I reflashed the stock recovery and tried to flash all the available UPDATE.APP on the internet but didn't get me anywhere.
since it's still under warranty, I'll drop it off.

irock_you said:
I'm stuck on boot loop. I used TWRP to flash boot.img, and now I got ERROE 10 NO SYSTEM.
I reflashed the stock recovery and tried to flash all the available UPDATE.APP on the internet but didn't get me anywhere.
since it's still under warranty, I'll drop it off.
Click to expand...
Click to collapse
Sorry for the late reply. But honestly trying the warranty repair would.habe been my choice as well. Did they help you on warranty if I may ask!?
Mine's away the second time now. First time the eMMC has been corrupted and wasn't working any longer, where they replaced the Mainboard and a new IMEI was given to it. This time the IMEI got erased and read 000000000000000. They received it on friday 2 pm, repaired it and sent it back via UPS the same day. Will arrive on monday. Done on warranty as well.
Never the less this'll be my last Huawei. To many defects within the warranty person and bad update policy.
Sent from my HTC U11 using XDA Labs

TWRP-3.1.0-Recovery-MediaPadM2-10.0-LISZT-A01L-A01W.img
d01h----mediapad m2 10
Thx change success!

5m4r7ph0n36uru said:
It's the latest ROM for the MediaPad M2 10 LTE. Still Lollipop though.
Sent from my htc_ocnuhl using XDA Labs
Click to expand...
Click to collapse
may i know is this EMUI 3.1 or later version ?

Is this later version than V100R001C100B209B005 ?

[Magisk] Root P20 [EML]

Since I promised ill patch ramdisk of P20 (versions) ill try live up to it my promise. Please do note that this is untested since currently I don't own nor any device of P20 line
Installation instructions.
Download the zip for your device and unpack it to your computer.
Boot your phone into bootloader (volume down and plug in cable)
Type: fastboot flash ramdisk yourpatchedboot.img
Reboot!? Proofit!?
Edit: if you have issues with Magisk and safetynet read
secXces_debaki said:
Like i wrote on p20 pro forum @LastStandingDroid you should include that here too..
After flashing the patched ramdisk they should install magisk over magisk manager again to pass safteynet and install modules.
Click to expand...
Click to collapse
Downloads:
EML-L29
https://mega.nz/#!gPBCCCyI!HOCiXH2Zrl84l01PT99U_ElMMuC_JukjgS47DZGkqPQ
Eml-l09?
https://mega.nz/#!dOoAnaIS!MMw2QFp_JNegVG0g95RrVm_AmqDpvtO-wGQX1LLkmYs
EML-TL00/AL00 8.1.0.106
https://mega.nz/#!hKQXgCKT!C2tObO92jyuYBvrVrPeOIfWHSkpVeUCtIgjfuhENaCo

EML-L29 working
EML-L09 untested
EML-AL00/TL-00 untested
Everyone should be pre rooted though
Sent from my DUK-L09 using Tapatalk

will test EML-TL00/AL00 8.1.0.106 tomorrow,thks~!

Thanks!
I'm going to test it on the p20.

Ladies and gentlemen soon a twrp will be hopefully released for P20 pro (tested) and should hopefully work on P20 which will have decryption support.
Don't believe me?
I'm talking to the developer who built it so stay tuned you'll eventually see it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my DUK-L09 using Tapatalk

quick question, does the bootloader have to be unlocked to flash magisk?

Samueldanny said:
quick question, does the bootloader have to be unlocked to flash magisk?
Click to expand...
Click to collapse
Yes

LastStandingDroid said:
Since I promised ill patch ramdisk of P20 (versions) ill try live up to it my promise. Please do note that this is untested since currently I don't own nor any device of P20 line
Installation instructions.
Download the zip for your device and unpack it to your computer.
Boot your phone into bootloader (volume down and plug in cable)
Type: fastboot flash ramdisk yourpatchedboot.img
Reboot!? Proofit!?
Click to expand...
Click to collapse
Hello!
First and foremost, massive thank you for your work.
Second: it, unfortunately, doesn't work for me on my EML-L29TWRP (or I just messed up something). I followed the flash trough Fastboot command, installed magisk manager app but there is no supersu available like on your screenshots I have unlocked my bootloader properly ( get all warnings how my phone cant be trusted).
I just need superSU to remove retail demo app but if necessary I'm willing to debug software.
Also, I have screen captures to show my issue but because I am a new user I cant share them.

LastStandingDroid said:
Ladies and gentlemen soon a twrp will be hopefully released for P20 pro (tested) and should hopefully work on P20 which will have decryption support.
Don't believe me?
I'm talking to the developer who built it so stay tuned you'll eventually see it
View attachment 4476320View attachment 4476321
Click to expand...
Click to collapse
This is a good news. We all wait for this famous twrp, so if it is almost operational it's really an excellent news.

Foglito said:
Hello!
First and foremost, massive thank you for your work.
Second: it, unfortunately, doesn't work for me on my EML-L29TWRP (or I just messed up something). I followed the flash trough Fastboot command, installed magisk manager app but there is no supersu available like on your screenshots I have unlocked my bootloader properly ( get all warnings how my phone cant be trusted).
I just need superSU to remove retail demo app but if necessary I'm willing to debug software.
Also, I have screen captures to show my issue but because I am a new user I cant share them.
Click to expand...
Click to collapse
Which file did you flash
If anyone needs help or has questions
You can join
https://t.me/joinchat/EzNJoUnSYrj_M7CnVvzNKg
I'll be more available at telegram than tapatalk/xda
Sent from my DUK-L09 using Tapatalk

fanfan7110 said:
This is a good news. We all wait for this famous twrp, so if it is almost operational it's really an excellent news.
Click to expand...
Click to collapse
Only downside for now is you can only decrypt if you have no password set. Though
Sent from my DUK-L09 using Tapatalk

LastStandingDroid said:
Only downside for now is you can only decrypt if you have no password set. Though
Click to expand...
Click to collapse
You might want to tell the builder to check the commit from TWRP for Pixel 2. February security patch causing that decryption problem when user have password set. But it has been fixed since march by DeesTroy.

Saftynet is being tripped.
I have L29

otonieru said:
You might want to tell the builder to check the commit from TWRP for Pixel 2. February security patch causing that decryption problem when user have password set. But it has been fixed since march by DeesTroy.
Click to expand...
Click to collapse
I've forwarded this thanks for the info [emoji16]
Sent from my DUK-L09 using Tapatalk

Samueldanny said:
Saftynet is being tripped.
I have L29
Click to expand...
Click to collapse
Interesting. This could be though due to demo unit possibly. Since it most likely isn't going to pass safetynet I can't tell
Sent from my DUK-L09 using Tapatalk

LastStandingDroid said:
Interesting. This could be though due to demo unit possibly. Since it most likely isn't going to pass safetynet I can't tell
Click to expand...
Click to collapse
I'm also unable to install modules.

Samueldanny said:
I'm also unable to install modules.
Click to expand...
Click to collapse
Please do join https://t.me/joinchat/EzNJoUnSYrj_M7CnVvzNKg for better assistance.
Tapatalk gives me tons of updates so can't keep track
Sent from my DUK-L09 using Tapatalk

LastStandingDroid said:
Only downside for now is you can only decrypt if you have no password set. Though
Sent from my DUK-L09 using Tapatalk
Click to expand...
Click to collapse
On a other side, it's not a big problem. It's simple to remove security password, install twrp and root, and then, put again the security with password.
That was what we had to do with the OnePlus 5T at the beginning of the first versions of TWRP.
we hope that a functional and downloadable version will be available soon
On the other hand if huawei could allow to download a ROM Stock, it would still be safer in case of bad flashing or brick phone. But can we hope that soon, not sure.

Like i wrote on p20 pro forum @LastStandingDroid you should include that here too..
After flashing the patched ramdisk they should install magisk over magisk manager again to pass safteynet and install modules.

secXces_debaki said:
Like i wrote on p20 pro forum @LastStandingDroid you should include that here too..
After flashing the patched ramdisk they should install magisk over magisk manager again to pass safteynet and install modules.
Click to expand...
Click to collapse
Oh yah didn't knew that was needed until a hour ago or two. Have had little time busy spending time with family.
Sent from my DUK-L09 using Tapatalk

Which is the Best Rom for Pixel 3 Xl

Which is the best Kernel you have used on Pixel 3 Xl

Have you looked in the ROM section? There is currently only one available.

airmaxx23 said:
Have you looked in the ROM section? There is currently only one available.
Click to expand...
Click to collapse
I messed up I wanted to say Kernel

Maty360414 said:
I messed up I wanted to say Kernel
Click to expand...
Click to collapse
Gotcha. :good:

"best" is very subjective so try some and see how they work for you.
Sent from my [device_name] using XDA-Developers Legacy app

Maty360414 said:
I messed up I wanted to say Kernel
Click to expand...
Click to collapse
That's for you to decide, it's really down to preference. What's good for one person might not be for another. This question is pretty much the same as "whats the best phone", it just depends. But, I'm using the Proton kernel v7 and I'm happy with it. Battery life and performance are good.

Mine is DU
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Pixel 3 XL using Tapatalk

Saw it dropped yesterday, and plan to flash.
Did you follow the steps in the pinned post, or modify it somewhat?
superchilpil said:
Mine is DU View attachment 4660559
Sent from my Pixel 3 XL using Tapatalk
Click to expand...
Click to collapse
Sent from my Pixel 3 XL, #WhiteUIsMustDie, #EndDarkAppOppression

micmars said:
Saw it dropped yesterday, and plan to flash.
Did you follow the steps in the pinned post, or modify it somewhat?
Sent from my Pixel 3 XL, #WhiteUIsMustDie, #EndDarkAppOppression
Click to expand...
Click to collapse
I "followed" the instructions, but I just did it out of habit. I found the rom before I found their instructions and where it was actually posted.
A few days before it dropped I tried building it but kept running into build environment issues, but I did notice its targeted towards the December update so make sure you update first.
Sent from my Pixel 3 XL using Tapatalk

superchilpil said:
Mine is DU View attachment 4660559
Sent from my Pixel 3 XL using Tapatalk
Click to expand...
Click to collapse
Are you talking about Dirty Unicorn ?. Where can i find it , dont see it in the Roms section .

jawonder said:
Are you talking about Dirty Unicorn ?. Where can i find it , dont see it in the Roms section .
Click to expand...
Click to collapse
It's not on XDA, gotta search around for it.
Sent from my Pixel 3 XL using Tapatalk

superchilpil said:
It's not on XDA, gotta search around for it.
Sent from my Pixel 3 XL using Tapatalk
Click to expand...
Click to collapse
So you just factory rest and flash Rom and TWRP zip and it boot up fine and working ?.

So i flash and it keeps rebooting back to TWRP Recovery from the GU Boot Animation . Wonder if it's because i was on the December update ?. Any had success flashing from December update ?.

I'm also curious as to what makes each Kernel different. I can't really tell what each Kernel does, for example:
Freak07 said:
Graphic related features:
- KCAL to control the display
- Adreno Boost
- Enabled NAP power saving state of Adreno 630
Click to expand...
Click to collapse
This is from Kirisakura.
It sounds good, but I don't know how it would affect my phone.
Five or so Kernels are out for Pixel 3 XL. How do I know which is "best for me?"
So I ask, what do you look for in a Kernel / How should I choose a Kernel?

ZzEzZ said:
I'm also curious as to what makes each Kernel different. I can't really tell what each Kernel does, for example:
This is from Kirisakura.
It sounds good, but I don't know how it would affect my phone.
Five or so Kernels are out for Pixel 3 XL. How do I know which is "best for me?"
So I ask, what do you look for in a Kernel / How should I choose a Kernel?
Click to expand...
Click to collapse
IMHO, unless you want to mess around with clock speeds and stuff, stock kernel is just fine.
Sent from my [device_name] using XDA-Developers Legacy app

jawonder said:
So you just factory rest and flash Rom and TWRP zip and it boot up fine and working ?.
Click to expand...
Click to collapse
jawonder said:
So i flash and it keeps rebooting back to TWRP Recovery from the GU Boot Animation . Wonder if it's because i was on the December update ?. Any had success flashing from December update ?.
Click to expand...
Click to collapse
I made sure to update to the December update. Well at least the vendor, radio, and BL. The build is targeted towards the December update.
I factory reset, flashed the rom followed by twrp, booted up and set everything up then after it was done then I flashed magisk.
So what I would say is make sure everything is up to date (BL, vendor, and Radio) then make sure that your zip isn't corrupt
If all of the above is good then f reset in twrp, then wipe system. Flash the rom and twrp. Profit?
Sent from my Pixel 3 XL using Tapatalk

superchilpil said:
I made sure to update to the December update. Well at least the vendor, radio, and BL. The build is targeted towards the December update.
I factory reset, flashed the rom followed by twrp, booted up and set everything up then after it was done then I flashed magisk.
So what I would say is make sure everything is up to date (BL, vendor, and Radio) then make sure that your zip isn't corrupt
If all of the above is good then f reset in twrp, then wipe system. Flash the rom and twrp. Profit?
Sent from my Pixel 3 XL using Tapatalk
Click to expand...
Click to collapse
I was on the latest December update . I Factory Reset Flashed the Rom them flashed TWRP 3.2.3.2 zip. I rebooted and got to the DU boot Animation froze then reboot back to TWRP . What version of TWRP did you use ?. Also i downloaded the DU zip many times and checked the MD5 with different MD5 checker and the MD5 doesn’t match, i get the same MD5 with all the app that i used and it doesn’t match the one generated from the DU download area .
Also do have the December update Bootloader and Radio on both A bad B slots ?.

Yeah it has to be on both slots. Whenever you flash firmware it should to be to both slots always.
Sent from my Pixel 3 XL using Tapatalk

superchilpil said:
Yeah it has to be on both slots. Whenever you flash firmware it should to be to both slots always.
Sent from my Pixel 3 XL using Tapatalk
Click to expand...
Click to collapse
Is there a command that can be used to ensure firmware is flashed to both slots ?.
Edit: Got DU working. I was flashing TWRP 3.2.2.1 zip over 3.2.3.2 image don't know if made any difference but the only thing i changed was to flash TWRP 3.2.3.2 zip after flashing DU and it booted fine

I chose DU because I didn't need to go back to a month old operating system to get it to install.
Booted to TWRP and did a factory reset. Installed DU zip and rebooted. Set up user and let it settle.
Rebooted to TWRP and installed Kirisakura kernel 1.8.5, and Magisk 18.0.
Rebooted to system and all is well.
Nice ROM, and the kernel is absolutely the best.
JMO!

[ROM] XIAOMI.EU ROMS - Stable and Weekly released

XIAOMI.EU started uploading xiaomi.eu ROMs For Mi Mix 3
Stable Release from here https://xiaomi.eu/community/threads/miui-10-0-10-1-stable-release.47170/
Weekly Builds from here https://xiaomi.eu/community/forums/miui-rom-releases.103/
TWRP Recovery as per xiaomi.eu is https://androidfilehost.com/?fid=11410963190603869442
also its uploaded inside the shared links above
Installation procedure - 2nd post
Enjoy

Just few hours i got my bootloader unlocked. i did the installation and everything is working fine except one thing which is the magisk , the 18.0 version couldn't be installed. i keep 17.1 , Full screen is fine and no issue. the twrp is done and no more going to stock recovery.
my installation was :
1. unlocking bootloader
2. installation of twrp via fastboot.
3. reboot while pressing the volume up to reach recovery.
4. switch recovery language to english
6. format data from wipe.
7. reboot to recovery from reboot menu of twrp.
8. copying the rom file 8.12.7 to the internal storage
9. installing the rom.
10.reboot.
after finishing wizards and configure google account reboot again and install the magisk 17.1
Enjoy

Please give us complete guide to install, from unlock to final installation

I believe in we should have unlocked bootloader, then using fastboot to flash the twrp recovery -i had November 24 build-
Factory reset via twrp and installation of this build.
Myself i need around 3days to get my bootloader unlocked and install it. Maybe newer build will be available.

Work like a charm[emoji41]
And Google assistant on the AI press Button !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Envoyé de mon MIX 3 en utilisant Tapatalk

croisade said:
Work like a charm[emoji41]
And Google assistant on the AI press Button !View attachment 4661926
Envoyé de mon MIX 3 en utilisant Tapatalk
Click to expand...
Click to collapse
Happy to hear this.. awaiting my bootloader unlocking....:good:

Do not wipe the system partition before flashing the ROM. And you should come from a MIUI ROM.
I installed it via the following steps:
- Flash fastboot factory dev ROM 8.11.8 from here: http://www.miui.com/shuaji-393.html (flash_all.sh)
- Validate that the Device boots
- Flash TWRP Recovery "recovery-TWRP-3.2.3-1205-XIAOMI_MIX3-CN-wzsx150.img"
- Reboot and hold volume up until you get into the Recovery menu. Mostly the device will reboot 2 times here.
- Download and push the xiaomi.eu ROM to the device via "adb push xiaomi.eu_multi_MIMix3_8.11.30_v10-9.zip /sdcard/xiaomi.eu_multi_MIMix3_8.11.30_v10-9.zip"
- Flash the zip and reboot
- Enjoy

croisade said:
Work like a charm[emoji41]
And Google assistant on the AI press Button !
Envoyé de mon MIX 3 en utilisant Tapatalk
Click to expand...
Click to collapse
Had u problem with fingerprint or pattern?

PeppeCNN said:
Had u problem with fingerprint or pattern?
Click to expand...
Click to collapse
Works fine

andikicker said:
Do not wipe the system partition before flashing the ROM. And you should come from a MIUI ROM.
I installed it via the following steps:
- Flash fastboot factory dev ROM 8.11.8 from here: http://www.miui.com/shuaji-393.html (flash_all.sh)
- Validate that the Device boots
- Flash TWRP Recovery "recovery-TWRP-3.2.3-1205-XIAOMI_MIX3-CN-wzsx150.img"
- Reboot and hold volume up until you get into the Recovery menu. Mostly the device will reboot 2 times here.
- Download and push the xiaomi.eu ROM to the device via "adb push xiaomi.eu_multi_MIMix3_8.11.30_v10-9.zip /sdcard/xiaomi.eu_multi_MIMix3_8.11.30_v10-9.zip"
- Flash the zip and reboot
- Enjoy
Click to expand...
Click to collapse
With or without unlocking the bootloader?

Iluminatus23 said:
With or without unlocking the bootloader?
Click to expand...
Click to collapse
unlocked bootloader

i can confirm this works i would wipe data before installing as i causes issues with camera not being able to locate storage to save

Magisk 18 doesnt work, 17.3 is working, SafetyNet check - Success
Adaway - Copying of hosts file failed. Fixed, i am not sure is it because of Magisk/Settings/Systemless hosts, or restart cpl of time. But now its working.
Bluetooth cant find my Amazfit watch.
MGC 6.1.021 MI8 V1d - works perfectly
Those are bugs I am facing after install.

OK Google word is working? Even with screen off?

I get this error
D:\Download\MiMIX3\perseus_images_8.11.8>fastboot getvar product 2>&1 | findstr /r /c:"^product: *perseus" || echo Missmatching image and device
how can i do? it's the first time. image of perseus is correct

mastercut said:
I get this error
D:\Download\MiMIX3\perseus_images_8.11.8>fastboot getvar product 2>&1 | findstr /r /c:"^product: *perseus" || echo Missmatching image and device
how can i do? it's the first time. image of perseus is correct
Click to expand...
Click to collapse
What you trying to do? Install TWRP?

Mackay53 said:
What you trying to do? Install TWRP?
Click to expand...
Click to collapse
No Iwas flashing the fastboot rom 8.11.8
now i'm on stable 10.0.12.0

mastercut said:
No Iwas flashing the fastboot rom 8.11.8
now i'm on stable 10.0.12.0
Click to expand...
Click to collapse
You shouldn't need to flash that, worked fine for me not being on 8.11.8.
Boot TWRP
Wipe data/dalvik
Install EU zip
Factory reset
Reboot

Mackay53 said:
You shouldn't need to flash that, worked fine for me not being on 8.11.8.
Boot TWRP
Wipe data/dalvik
Install EU zip
Factory reset
Reboot
Click to expand...
Click to collapse
cannot boot in recovery

Mackay53 said:
You shouldn't need to flash that, worked fine for me not being on 8.11.8.
Boot TWRP
Wipe data/dalvik
Install EU zip
Factory reset
Reboot
Click to expand...
Click to collapse
what are the diferences to the China rom? Can someone paste few screenshots

TWRP

Any news about twrp? i could also test if someone develop it

Here we go....
Here is your to do list:
- Unlock bootloader
- Gain root access using either Magisk or SuperSu
- Install busybox
- extract boot.img and recovery.img
- Use this guide to try to port twrp yourself : https://forum.xda-developers.com/android/general/guide-porting-twrp-source-t3843473
My phone is 2 days old so i can't unlock bootloader yet.
Best Regards

mylove90 said:
Here we go....
Here is your to do list:
- Unlock bootloader
- Gain root access using either Magisk or SuperSu
- Install busybox
- extract boot.img and recovery.img
- Use this guide to try to port twrp yourself : https://forum.xda-developers.com/android/general/guide-porting-twrp-source-t3843473
My phone is 2 days old so i can't unlock bootloader yet.
Best Regards
Click to expand...
Click to collapse
I'm not so sure is so easy on lasts xiaomi devices...

PeppeCNN said:
I'm not so sure is so easy on lasts xiaomi devices...
Click to expand...
Click to collapse
it's easy, same for me, my device is 5 day old

FreakSh000w said:
it's easy, same for me, my device is 5 day old
Click to expand...
Click to collapse
so u can do it?

PeppeCNN said:
I'm not so sure is so easy on lasts xiaomi devices...
Click to expand...
Click to collapse
Upload your boot.img and recovery.img and let's try to do it all together

Me too I'm waiting to unlock my bootloader then I will work with u guys

PeppeCNN said:
Any news about twrp? i could also test if someone develop it
Click to expand...
Click to collapse
We have 2 chinese-english TWRP
http://www.miui.com/thread-23286553-1-1.html
http://www.miui.com/thread-23429227-1-1.html
I've installed first. And after successful installation, WIFI no longer works.
Now I am reflashing MIUI...and I will try second recovery.

@PeppeCNN
Okay. I have to tell you. This is WORKING TWRP.
It contains English and Chinese only.
Download link: https://mega.nz/#!TpojlSIA!ymMSB9wBHiza9kSAzqO-8idkuv5mRsvMXQ5rno4Z-so
Redmi 7 special edition TWRP Chinese and English modified optimization version
build date: 2019.4.20
modell: red rice 7, redmi 7
developer: wzsx150
team name: LR.Team
Quote from the Chinese website:
pre-brush into the third-party rec, must unlock the phone! ! Again, the brush machine is risky, please be cautious!
1. This rec supports data partition automatic decryption , encrypted data can be used normally under rec. The official system defaults to encrypting data partitions.
2. This rec supports the official full-page card swipe, but it may cover twrp; when upgrading automatically, you can remove the checkbox of the setting > auto-restart option for easy operation.
3. The bootloader must be unlocked to be able to brush into a third-party rec.
4. Built-in advanced > root system / clear root function.
5. Built-in advanced > remove dm checksum and cancel the forced encryption function, through certain operations, you can remove the official data forced encryption (understand people naturally understand how to operate, because avb2.0 exists, this function may not be normal).
6. Prevent the functions covered by the official rec: root system, signature boot, remove dm check, cancel forced encryption, etc. (some functions may cause the system to fail to enter, carefully operate).
刷入第三方rec前，必须解锁手机！！再次提醒，刷机有风险，操作请谨慎！
1.本rec支持data分区自动解密，加密的data不用格式化也能在rec下正常使用。官方系统默认是加密data分区。
2.本rec支持刷入官方原版全量卡刷包，但可能会覆盖twrp；自动升级时，可以去掉设置>自动重启选项的勾选，方便操作。
3.必须解锁bootloader才能刷入第三方rec。
4.内置高级>root系统/清除root功能。
5.内置高级>去除dm校验和取消强制加密功能，通过一定操作，可以去掉官方的data强制加密（懂的人自然懂怎么操作，因为avb2.0的存在，该功能可能不正常）。
6.防止被官方rec覆盖的功能：root系统、签名boot、去除dm校验、取消强制加密等（部分功能可能导致进不去系统，慎重操作）

JulianJenner said:
@PeppeCNN
Okay. I have to tell you. This is WORKING TWRP.
It contains English and Chinese only.
Download link: https://mega.nz/#!TpojlSIA!ymMSB9wBHiza9kSAzqO-8idkuv5mRsvMXQ5rno4Z-so
Redmi 7 special edition TWRP Chinese and English modified optimization version
build date: 2019.4.20
modell: red rice 7, redmi 7
developer: wzsx150
team name: LR.Team
Quote from the Chinese website:
pre-brush into the third-party rec, must unlock the phone! ! Again, the brush machine is risky, please be cautious!
1. This rec supports data partition automatic decryption , encrypted data can be used normally under rec. The official system defaults to encrypting data partitions.
2. This rec supports the official full-page card swipe, but it may cover twrp; when upgrading automatically, you can remove the checkbox of the setting > auto-restart option for easy operation.
3. The bootloader must be unlocked to be able to brush into a third-party rec.
4. Built-in advanced > root system / clear root function.
5. Built-in advanced > remove dm checksum and cancel the forced encryption function, through certain operations, you can remove the official data forced encryption (understand people naturally understand how to operate, because avb2.0 exists, this function may not be normal).
6. Prevent the functions covered by the official rec: root system, signature boot, remove dm check, cancel forced encryption, etc. (some functions may cause the system to fail to enter, carefully operate).
刷入第三方rec前，必须解锁手机！！再次提醒，刷机有风险，操作请谨慎！
1.本rec支持data分区自动解密，加密的data不用格式化也能在rec下正常使用。官方系统默认是加密data分区。
2.本rec支持刷入官方原版全量卡刷包，但可能会覆盖twrp；自动升级时，可以去掉设置>自动重启选项的勾选，方便操作。
3.必须解锁bootloader才能刷入第三方rec。
4.内置高级>root系统/清除root功能。
5.内置高级>去除dm校验和取消强制加密功能，通过一定操作，可以去掉官方的data强制加密（懂的人自然懂怎么操作，因为avb2.0的存在，该功能可能不正常）。
6.防止被官方rec覆盖的功能：root系统、签名boot、去除dm校验、取消强制加密等（部分功能可能导致进不去系统，慎重操作）
Click to expand...
Click to collapse
I flashed, thanks.
Now we need ROMs, I tried the miui from miui.it but stuck.
Waiting for eu
Inviato dal mio MI PAD 4 utilizzando Tapatalk

After ROM flash, you need a dmverityforceencrypt.zip !!!
https://mega.nz/#!6xpgQazL!RZALbnhhR8xEiri_7ljivVBZd2RhZYbQSmWd-tTgwtc
After zip, my phone booted normally.
小米MIX标准版4GB128GB银色MIUI10中国开发者9.4.24.

JulianJenner said:
After ROM flash, you need a dmverityforceencrypt.zip !!!
https://mega.nz/#!6xpgQazL!RZALbnhhR8xEiri_7ljivVBZd2RhZYbQSmWd-tTgwtc
After zip, my phone booted normally.
小米MIX标准版4GB128GB银色MIUI10中国开发者9.4.24.
Click to expand...
Click to collapse
Which rom?
Inviato dal mio MI PAD 4 utilizzando Tapatalk

Can I flash the recovery without unlocking the bootloader?

aoamabrok said:
Can I flash the recovery without unlocking the bootloader?
Click to expand...
Click to collapse
No, u need to unlock before
Inviato dal mio MI PAD 4 utilizzando Tapatalk

PeppeCNN said:
Which rom?
Inviato dal mio MI PAD 4 utilizzando Tapatalk
Click to expand...
Click to collapse
Every MIUI ROMs need this zip...for normal booting.
小米MIX标准版4GB128GB银色MIUI10中国开发者9.4.24.

JulianJenner said:
Every MIUI ROMs need this zip...for normal booting.
小米MIX标准版4GB128GB银色MIUI10中国开发者9.4.24.
Click to expand...
Click to collapse
Custom miui (like eu for example) have it already inside rom zip usually
Inviato dal mio MIX 3 utilizzando Tapatalk

Yes. I thought official miui roms.
EU is a custom rom. Not official.
小米MIX标准版4GB128GB银色MIUI10中国开发者9.4.24.

JulianJenner said:
Yes. I thought official miui roms.
EU is a custom rom. Not official.
小米MIX标准版4GB128GB银色MIUI10中国开发者9.4.24.
Click to expand...
Click to collapse
Is only EEA, neither global as official roms to can use in Europe, I flashed EEA, but is not smoth, haven't themes app n don't let use tgz themes...ofc worked, but I didn't like so much
Inviato dal mio MI PAD 4 utilizzando Tapatalk

I've installed too EEA (before standard Global too).
Setted up to Suisse region.
And I have Themes.
Strange...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
小米MIX标准版4GB128GB银色MIUI10中国开发者9.4.24.

im trying to flash GSI and Treble, both result in a bootloop. Any solution?