Related
Many of the reviews I read/viewed of this phone back in early December pointed out the cheesy-ness of the cover and back.
One reviewer, phonedog I believe, suggested just tearing the cover off 1st thing because it's going to break anyway.
I haven't had any issue with the cover and think it looks pretty slick.
And I very much like the textured back- it's a big feature of this phone IMO.
I also like the texture and grip of the back-cover. I'd agree with any negative sayings that it's a pain in the arse to take the cover off and have to resort to prying it open from where the mic is, but other than that I think the cover is quite resilient to a bit of flexing and it snaps in/out of where it should easily.
To each his own.
I prefer this cover to either soapbox feel of sammy or iphone glass or plastic of moto. The usb cover was a stupid idea but I just deal with it. M
Sent from my LG-P930 using Tapatalk
When the rumors about this phone were whirling around and the first pictures came out, I almost decided not to buy it right then. Most pictures of the back that I see look very ugly, but in person, the back is great. It is very grippy and actually looks sharp IMO.
The USB cover can be bit annoying, but it really doesn't bother me that much.
The cover is actually pretty securely attached, and not likely to break off on accident. And I also think it was a stupid idea. But the back cover I love - I just wish the Nitro HD were popular enough to drive more accessory development - a gun metal grey brushed aluminum aftermarket replacement back would be awesome.
I like the texture on the back as it does make the phone easier to hold onto. But, I could do without the goofy cover for the micro-usb.
To be honest, I don't mind the usb cover. Better than having the port damaged/filled with pocket lint or something. I thought I was going to hate it. It only gets in the way whilst charging.
My Inspire didn't have a USB cover and I never damaged it, so I'm not a fan of the port cover. Or port positioning for that matter.
As far as the back is concerned. I don't like the feel of it, but it does have excellent grip and is very resistant to scratches and finger prints. It doesn't look so bad either. It looks much worse in pictures than in person.
I do have a problem with the design of the back cover though. Taking it off and on a few times, I've had the pucker factor every single time. It feels like it will break eventually. I hope it doesn't, but in the meanwhile, maybe someone will make an after market replacement before it happens. I haven't been taken the cover off as much now that I am carrying it on a daily basis.
I like the back cover... feels much better than Skyrocket. The USB cover is weird... I want to pull it off, but cant being myself to do it.
The back cover I guess is ok, I think it's durable, though it does feel like cheap plastic. Even with the texture on the back the sides are still smooth, so people saying about good grip, I'd like to see how you hold it that that texture matters ;p
The usb cover - it's useless (read as "retarded"). First off all, let's talk about the position of the plug, it's on top, which mean there will be no dock or anything related for this phone. Then this stupid cover, what does it protect it from? dust? gee how many phones anyone had with no such cover and has problem with dust? And it's not like this plug get used once a week, it's used at least twice a day!
I think the reason for the plug, is because many if not most people carrying the phone in the pocket and it lays there upside down, which means more chances something get jammed in that hole.
I really like the back cover, especially compared to the Skyrocket I had for a month.
The USB cover is actually quite useful for me. I work in a high dust environment so its quite handy.
Sent from my LG-P930 using XDA App
[email protected] said:
The back cover I guess is ok, I think it's durable, though it does feel like cheap plastic. Even with the texture on the back the sides are still smooth, so people saying about good grip, I'd like to see how you hold it that that texture matters ;p
Click to expand...
Click to collapse
while the sides aren't textured they aren't slick like the typical back, I find I do get more grip from the sides of this back than the glossy back sides. I also find myself gripping this device a couple of different ways that put some finger/palm areas in touch with the textured back.
for instance, just sliding my pointing finger up a bit on the back puts a lot of that finger in contact with the textured back.
walking down the street listening to tunes with the headset on I'll grab the device below the volume buttons and really wrap my hand around it, that puts a lot of my palm in contact with the back and really locks the phone down in my hand and still gives me room to tap the screen and change tracks, etc with my left pointing finger.
Hi..
Im not sure if anyone else is feeling what I'm feeling, but I'm literally scared to put this phone down on a hard surface... I feel that back camera lense will get scratched quite easily...
At the moment my phone is balancing on a pair of socks...
Somewhat agree - I mean, my Desire was the same, I think I'm just conscious of the fact that this is a gorgeous device and I don't want to mark it in any way.
I have an Oakley sunglasses bag that I rest it on when face up, but mostly I just put it face down. I mean, you can attack the screen with keys and it won't scratch, so I figure face down is the safest. Plus the back of the phone looks so amazing!
Thats a good point.
Looking forward to when Casemate release their cases for this phone. Hopefully that will have some sort of protection for the lense
A day after I received mine, I'd already managed to put a small yet noticeable scratch across the camera's glass surface and its metal rim. That's despite the fact that I don't place it on hard surfaces nor pocket it without the use of the official pouch. Though I'm thinking it might be a factory defect, it can't be stressed enough how vulnerable that particular area of the device is.
Have a scratch on the metal rim also, very small but yeah on a brandnew device..
Sent from my HTC One X using xda
stanny2k said:
Im not sure if anyone else is feeling what I'm feeling, but I'm literally scared to put this phone down on a hard surface... I feel that back camera lense will get scratched quite easily...
At the moment my phone is balancing on a pair of socks...
Click to expand...
Click to collapse
I'm exactly the same. It's a bit frustrating to think they put all that effort into giving us the Gorilla glass 2 on the screen, extra strong plastic on the case and an easily damaged camera lens that protrudes from the back. Go figure.
It wouldn't have been quite as bad if they'd recessed the glass lens so that it's less likely to come into contact with any surfaces.
I hope those socks are clean!
Also have a scratch on mine, just by the rim. Didnt think anything of it before getting the phone but it is badly thought out imo. I would have rather the phone be a little thicker and the lense/glass better protected than it is. Ah well...
Sent from my HTC One X using xda premium
leaston said:
It wouldn't have been quite as bad if they'd recessed the glass lens so that it's less likely to come into contact with any surfaces.
Click to expand...
Click to collapse
I'm pretty sure I read somewhere that it is slightly recessed - by looking at pictures I don't know if it is recessed enough to properly prevent scratches, though.
Look here: http://forum.xda-developers.com/showthread.php?t=1577895&page=3
Discussion about how to protect your camera lens.
I applied a cut-out of the original HTC screen protector on the lens and can't see any reduction of image quality ... Hopefully it protects the lens ...
SamWhite said:
I'm pretty sure I read somewhere that it is slightly recessed - by looking at pictures I don't know if it is recessed enough to properly prevent scratches, though.
Click to expand...
Click to collapse
It is recessed? Crikey, I can't see or even feel it. The surfaces most likely to scratch it are probably rough enough to reach the glass despite the microscopic recess
I bought a White Frosted Gel case. If I put the phone on a flat surface the lens is protected by the case. That is if you want a case
using an adhesive 16mm rooundpad
On the cam of the 1S the lens is slightly recessed. Unfortunately not on the 1X.
I put an anti sliding, anti vibrating pad for soundspeakers on top of of it. Sticks during daily use like a charm and is removed and put back for filming in seconds.
Yeah, really simple but effective
Edit: No way I am hiding this beast in a pouch. It shall shine and chime. The pouches are for my daughters
Hmm it is actually fractionally recessed, like a fraction of a mm. But not enough that if there was a bit of grit on the table, it wouldn't catch it. Also the plastic lens surround (silver finish), is not the same quality as the polycarbonate. So yes, it screams "scratch me" which is a bit silly considering the rest of the phone. You would actually be better to put it face down than face up on a table, but then you can't see the screen! Doh!
For those with the white phone, you could consider HTC HC C700 clip on back cover. It is basically translucent so you can still see the back through it, but it stupidly doesn't have the cut-out holes for the forthcoming docks. For that you will need HTC HC C740 clip on covers which don't have a see-through version! *sigh*
Have a look at the pouches thread in the accessories,I got a nice HTC side flip case phone still feels great in hand but the.plastic back is just enough so you can put it down and the lense does not touch the surface
Sent from my HTC One X using xda premium
Hey Guys and Girls,
I just got my Galaxy S III a month ago and I am developing a problem I can't seem to figure out. On the edges of the phone, where the glass meets the blue plastic I am getting a build up of dirt. I keep my hands very clean as I am super OCD about my devices. With that being said, I am getting dirt and "grime" build up in the sides. Sometimes it's hard to notice but it becomes clearer as more days go on. I have contacted Samsung and they were unwilling to decide what it was without seeing it. I contacted my carrier who sent me a replacement after ten or more calls. The new device seems to suffer the same fate. I am wondering if anyone else is having this problem or knows how to get rid of it. I tried to clean it with an air canister with no luck and plenty of sharp objects. None which would do a great job, the only thing that came close was a toothbrush and that was difficult to say the least. Is this a known problem or am I getting more defective devices. Thanks for your input.
P.S- I know the photo isn't great and I will take more to show the effects. It is most noticeable in the corners, the sides, and around the speaker and home button.
Appreciate the help!
I don't have any issues and I have the white one, so it should be more obvious.
Sent from my SAMSUNG-SGH-I747 using xda premium
I had some lint build up in mine before I got a case (free zoogue deal) that covers the gap. I just used the corner of a folded piece of paper to clean it out a few times. Personally, I consider that gap to be a design flaw, particularly considering that the gap is not uniform on all sides...
annulation said:
I had some lint build up in mine before I got a case (free zoogue deal) that covers the gap. I just used the corner of a folded piece of paper to clean it out a few times. Personally, I consider that gap to be a design flaw, particularly considering that the gap is not uniform on all sides...
Click to expand...
Click to collapse
I will try the paper trick, pretty much the only thing I didn't use. I find the gap to be a flaw as well considering that over time it is only bound to get worse. I have found that some spots are wider than others. Not sure why they would create a design like this but glad to see I am not the only one. I thought I was being OCD for awhile.
chaoticfury said:
I will try the paper trick, pretty much the only thing I didn't use. I find the gap to be a flaw as well considering that over time it is only bound to get worse. I have found that some spots are wider than others. Not sure why they would create a design like this but glad to see I am not the only one. I thought I was being OCD for awhile.
Click to expand...
Click to collapse
The gap isn't a design flaw: it's actually the seam between the front and back of the phone, and it's where you slip a spudger (flat plastic knife) in order to pry it apart (after rear screws are removed) for repair.
Just put a case on it -- any case will do -- and then it's virtually a non-issue. If you don't want to use case then just live with having to clean out the gunk build-up every couple months.
(And, frankly, it's kinda lame that you *****ed about this "problem" over 10 phonecalls and then they finally gave you a replacement phone to make you go away and stop costing them money)
Before I had a case I didn't have this issue. The gap isn't very noticeable. I have a Diztronic TPU case now ($10 Amazon) and it has a small lip which covers that gap. Maybe you have dirty pockets or a batch of phones that just had a slightly larger gap.
zmore said:
The gap isn't a design flaw: it's actually the seam between the front and back of the phone, and it's where you slip a spudger (flat plastic knife) in order to pry it apart (after rear screws are removed) for repair.
Just put a case on it -- any case will do -- and then it's virtually a non-issue. If you don't want to use case then just live with having to clean out the gunk build-up every couple months.
(And, frankly, it's kinda lame that you *****ed about this "problem" over 10 phonecalls and then they finally gave you a replacement phone to make you go away and stop costing them money)
Click to expand...
Click to collapse
You are entitled to your opinion about how lame or not lame it was for me to call, but the truth of the matter is I have owned a multitude of phones in my lifetime, none which had a problem like this at all. I am not sure if you are in Canada, but a three year term for a phone that constantly needs maintenance for removing dust does not seem like a premium device in my book. Not to mention the fact that if it finds it's way under the screen as you suggest, then it would only cause future problems, outside of the one year warranty, rendering me with an inoperable phone. So I can't say I agree with your analysis of my calls. Not to mention it costs them a negligible amount to speak with me on the phone.
Most of the cases I have found only cover the rear of the device and do not cover the lip. I would hate to cover up my super phone in a five dollar POS case just for the sake of keeping dust out of a device that should have been designed to not have that happen to begin with.
chaoticfury said:
You are entitled to your opinion about how lame or not lame it was for me to call, but the truth of the matter is I have owned a multitude of phones in my lifetime, none which had a problem like this at all. I am not sure if you are in Canada, but a three year term for a phone that constantly needs maintenance for removing dust does not seem like a premium device in my book. Not to mention the fact that if it finds it's way under the screen as you suggest, then it would only cause future problems, outside of the one year warranty, rendering me with an inoperable phone. So I can't say I agree with your analysis of my calls. Not to mention it costs them a negligible amount to speak with me on the phone.
Click to expand...
Click to collapse
It can't get behind the screen because it's one piece, so don't worry about that.
Most of the cases I have found only cover the rear of the device and do not cover the lip. I would hate to cover up my super phone in a five dollar POS case just for the sake of keeping dust out of a device that should have been designed to not have that happen to begin with.
Click to expand...
Click to collapse
Yeah, many of the hard polycarb cases -- like Samsung's mesh case, or the popular Rock Quicksand -- that offer little edge protection don't cover the the entire lip because they can't. All TPU and hybrid cases do, though.
chaoticfury said:
Most of the cases I have found only cover the rear of the device and do not cover the lip. I would hate to cover up my super phone in a five dollar POS case just for the sake of keeping dust out of a device that should have been designed to not have that happen to begin with.
Click to expand...
Click to collapse
Most TPU cases have a lip which wraps around the front. It's not a hard plastic case that tries to snap into place. I have the Diztronic case and the lip is definitely there and it definitely covers the gap you're referring to. I had a TPU case for my GSII and it's the same basic design. If you don't want a case then you'll have to put up with the dirt in the crevices or get a different phone.
AngelsNecropolis said:
Most TPU cases have a lip which wraps around the front. It's not a hard plastic case that tries to snap into place. I have the Diztronic case and the lip is definitely there and it definitely covers the gap you're referring to. I had a TPU case for my GSII and it's the same basic design. If you don't want a case then you'll have to put up with the dirt in the crevices or get a different phone.
Click to expand...
Click to collapse
Thanks Angels,
I will have a look at the cases as you suggest and try to find one that I like. I would hate to give up this phone as I very much enjoy it and don't see any other phones that interest me at the present moment.
chaoticfury said:
Thanks Angels,
I will have a look at the cases as you suggest and try to find one that I like. I would hate to give up this phone as I very much enjoy it and don't see any other phones that interest me at the present moment.
Click to expand...
Click to collapse
Np. I use this case. http://www.amazon.com/Diztronic-Fle...54&sr=8-7&keywords=diztronic+galaxy+s+III+tpu The matte feel is nice and it comes with a screen protector which I applied and it's good quality as well. It doesn't attract as much finger prints as other screen protectors I've used and it's very clear.
Off Topic:
But... even with a TPU case you'll have to be careful of drops. Gorilla Glass isn't as strong as it's touted to be against sudden impacts (watch iPhone5 vs Samsung Galaxy S III drop test). My GSII got a small scratch prior to applying a protector and just today a coworker dropped her GSII on concrete and the TPU case didn't stop the screen from severely cracking. It will protect from a lot of surface scratches though. My mom just got her first smart phone (a Pantech) and dropped it and it slid across the floor. I hadn't gotten her screen protector yet and her screen has some small scratches and nicks.
I guess my point is even if it reduces the aesthetics get a case, a screen protector, and be careful still.
I ordered that case like you suggested but it has yet to arrive. The replacement phone I got from my carrier is having even worse problems than my first one. I was even more careful with this than the others. Not really sure what to do. I am intrigued by the fact that I see nobody who has a white GS3 post problems about it. I wonder if the blue is the only one with these kind of issues.
I've got a blue one and don't have that problem
Galaxy SIII via XDA premium
This thread on tight fitting cases might be helpful.
I have. White phone no such issues I also noticed the white button sticks out a bit more.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
I had a blue one and had the same problem. The dust was noticeable around the edge and around the speaker. I ended up exchanging it because the home button died. All they had in stock was white so I took it. I have to say, the white one has much less of a seam and there is no noticeable dust build up!
Sent from my SGH-I747M using Tapatalk 2
cboone said:
I had a blue one and had the same problem. The dust was noticeable around the edge and around the speaker. I ended up exchanging it because the home button died. All they had in stock was white so I took it. I have to say, the white one has much less of a seam and there is no noticeable dust build up!
Sent from my SGH-I747M using Tapatalk 2
Click to expand...
Click to collapse
Going to see if I can get a white. I prefer blue but I hate this problem.
Mine collects dust too and I use a Rock case. I'd clean it if I could, but I can't seem to fit paper or anything in to push it out either. It's hardly visible, not putting too much thought in to it.
I had this case on the HTC 8X in grey and it was easily one of the best cases I've ever had on any phone. The thinness, feel and texture was great.
As a first case for the HTC One I decided to buy this one but in black instead of grey to match with the light aluminum. It's a great case, it feels great, adds grip and the matte color is awesome. The grip and feeling on the back is superb. However, for that matte look, the black case texture/material is a little different than the one I had on the grey for the 8X.
It attracts finger prints and sweat or grease of your fingers. If it wasn't for this, this case would be perfect, at least for me.
If you don't live on a humid place or don't have have problems with finger prints, get this case by all means. Where I live it's almost 80%-95% humid all year so even if I don't have sweaty hands, it's inevitable that they get moist.
To sum up, it's a wonderful case, despite the problem with the smudges on the back. For that detail alone, it won't be for anyone as it would need to be cleaned two or three times a day to avoid the greasy/moist look on the back.
I do plan to get one in grey as the one I had on the 8X had an even better texture and feel and it didn't attract stains or finger prints at all. AT ALL. It was also a much of a darker grey that it showed on the pictures and I liked it even more when I got it.
For scratch protection, minimum bulk and great look and feel, this is a very good case.
View attachment 2097786 View attachment 2097787 View attachment 2097788 View attachment 2097789 View attachment 2097790
PS: I have a MEIFENG (Bear Motion) in grey and a black Nillkin case on the way. I will post about them when they get here.
WOW that looks amazing. never heard of this brand case i am going to have to pick one up. thanks for your review!!
My problem with the case is the open top and bottom.
djq said:
WOW that looks amazing. never heard of this brand case i am going to have to pick one up. thanks for your review!!
Click to expand...
Click to collapse
You are welcome. Incipio is a known brand but not in all countries, they make cases for almost every smartphone.
OGhoul said:
My problem with the case is the open top and bottom.
Click to expand...
Click to collapse
I like the open top and bottom because it adds to the lightweight of the case and allows the natural aluminum color to be displayed prominently. The accessibility of the USB port and the power button is great because there is nothing around them.
This kind of case is only for scratch protection but that's the kind I'm always looking for.
I've also recently purchased this case in black. I LOVE the look of this case and one of the main features I like is that it still manages to maintain the ultra slim look and feel of the HTC One. This case really does fit well and doesn't detract from the stellar good looks of the phone.
One thing I do look for in these slim cases is that if the top edge of the case is slightly raised above the glass. That's a positive for me as I do not use screen protectors. With the top edge of the case raised just a hair it makes it easier to put my phone face down without worrying about scratching the glass. The Incipio Feather does have this very slight edge thankfully.
The only downside so far is that I've had to return my first case due to cracks. The two top corners of the case started to show stress cracks for some reason. In fairness they could have already been there as the first case I bought was already opened at the store and could have been a previous return. I didn't really check it that closely. It could have also been from me being a little aggressive taking the phone out of the case once to show somebody how slim it was. It fits really well so I may have forced it a little too hard.
The store did replace the case as it was previously opened and I checked the new one pretty carefully so no issues so far with the replacement. I'll post back here if any cracks appear again. Just in case you get one, be careful removing or installing the case and you should be fine. If you want the ultimate in good looks, decent grip and scratch protection then you won't go far wrong with this one. If you're one of those folks that likes the big armoured cases then this one isn't for you and nothing to see here.
This case will give you some basic protection while still maintaining the look and feel of the phone. And admit it, the look and feel of the HTC One is at least half or more of the reason you bought this awesome phone in the first place! Cheers!
ajua said:
You are welcome. Incipio is a known brand but not in all countries, they make cases for almost every smartphone.
Click to expand...
Click to collapse
thats why i love this forum i learn something i may have never found out about
joudbren said:
I've also recently purchased this case in black. I LOVE the look of this case and one of the main features I like is that it still manages to maintain the ultra slim look and feel of the HTC One. This case really does fit well and doesn't detract from the stellar good looks of the phone.
One thing I do look for in these slim cases is that if the top edge of the case is slightly raised above the glass. That's a positive for me as I do not use screen protectors. With the top edge of the case raised just a hair it makes it easier to put my phone face down without worrying about scratching the glass. The Incipio Feather does have this very slight edge thankfully.
The only downside so far is that I've had to return my first case due to cracks. The two top corners of the case started to show stress cracks for some reason. In fairness they could have already been there as the first case I bought was already opened at the store and could have been a previous return. I didn't really check it that closely. It could have also been from me being a little aggressive taking the phone out of the case once to show somebody how slim it was. It fits really well so I may have forced it a little too hard.
The store did replace the case as it was previously opened and I checked the new one pretty carefully so no issues so far with the replacement. I'll post back here if any cracks appear again. Just in case you get one, be careful removing or installing the case and you should be fine. If you want the ultimate in good looks, decent grip and scratch protection then you won't go far wrong with this one. If you're one of those folks that likes the big armoured cases then this one isn't for you and nothing to see here.
This case will give you some basic protection while still maintaining the look and feel of the phone. And admit it, the look and feel of the HTC One is at least half or more of the reason you bought this awesome phone in the first place! Cheers!
Click to expand...
Click to collapse
I'm very careful with my phones and cases. I hope yours was only a detail you didn't see when you bought it.
How are you doing with the finger smudges on the back of this case? It's better than I initially thought but I still have to clean it often.
djq said:
thats why i love this forum i learn something i may have never found out about
Click to expand...
Click to collapse
Everyone is learning something on this forum all the time
Just something i've noticed since i bought this case. Both the small strips on the sides have cracked. The case is awesome and i really don't care but be for-warned if you are picky.
Tuppidsay said:
Just something i've noticed since i bought this case. Both the small strips on the sides have cracked. The case is awesome and i really don't care but be for-warned if you are picky.
Click to expand...
Click to collapse
You can contact Incipio about this. The case comes with a one year warranty and I'm sure they'd be willing to cover that and replace it.:good:
I've bought a few cases for the One and this is definitely my favorite, all the rest I enjoyed but missed the slim line feel. The incipio is the best of both worlds.
Sent from my HTC_PN071 using Tapatalk 4 Beta
Just ordered one of these.
I'm seeing a lot of reviews on Amazon with the lighter colored ones hazing up flash pictures. Seems to be a common thing with close cutouts for the LED. Black cases are going to be the best to avoid flash interference.
Got mine and yes it's definitely one of the most minmalist cases I've ever used. Be careful with this one as it doesn't afford much in the way of drop protection but you already knew that...
The lip over the screen is a bit shorter than I'd like, still need to be wary of setting it down screen down just in case.
However for those that prefer the naked feel but don't want to be paranoid of scratching the back when sitting on a table, you will like this!
Be wary the plastic cutout piece along the top where the volume rockers and usb charging port are quite thin and can break if stressed too hard when putting the case on and especially taking it off, just take you time and be gentle.
The black finish does show finger grease but is easily cleaned. The incipio dual is the same way. At least it doesn't scratch super easy like some of the smooth and glossy backs.
No case is perfect, that's why I have a drawer full of different cases!
I like the minimalist look, but does anyone know of any similar type 'snap on' cases that has a bigger lip over the corners/edges so that the screen is more protected?
My friend has this case in grey, and hers started peeling/chipping on the back after a few months of use. She contacted Incipio and they'll be sending her a new case which is good...
I picked up a case for my HTC One at best buy. It looks 100% identical except for the logo on the back of the case. Very nice case.
icepixie said:
I like the minimalist look, but does anyone know of any similar type 'snap on' cases that has a bigger lip over the corners/edges so that the screen is more protected?
My friend has this case in grey, and hers started peeling/chipping on the back after a few months of use. She contacted Incipio and they'll be sending her a new case which is good...
Click to expand...
Click to collapse
There is the Poetic Palette and Nillkin Hard Case/Shell. I can't say about the front lip for the screen as I don't own them but you can search for pictures and see if it is more prominent than the lip on the feather.
Looks nice and very slim!! :laugh:
Where can I find power bank wireless charger?
Where can I find power bank wireless charger?
I want to get one.How Can i get it
Are there any case haterz on this forum, who run their phones without any kind of cases / back stickers etc ?
Could you post some photos, facts, knowledge how well the phone stands everyday usage ?
I have been using case since day one, but i just can't stand it anymore. Did I buy alluminium phone to put it in rubber case or stick plastic sheet of foil on it to lose the feeling of alluminium ? No !
I drop my phone very rarely, actually i have never droppped it (knock knock), only time it hit ground it was clumsy bird's (jokin clumsy friend's hands) fault. My only concern is lens protector. On one side its nicely hidden in the rim, but at the other lens cover is protruding just a very litle bit. I am attaching picture to illustrate it a bit. It is side look.
There's a "hole" in the phone body, so the lens should be all hidden / drown and there should be 1 milimeter gap, when i place phone on table. On one side there is, on other lens is in line with body.
Grey - phone
White - gap for lens cover
Black - lens cover
Mods, please do not delete this topic - this has already happened in past (moved to accesories thread), but it get lost very easily, i try to debate with users without accesories.
Thanks
i did for apprx 4 months when i first bought the device, now i'm using crystal clear case to not to hide devices body.
i bought a case after i saw scratches on camera lens, luckly camera lens got replaced after service for red tint.
also shiny exposed alumium around the device got scratched and deformed a bit.
I also am not a fan of big bulky cases. One of the main reasons I bought this phone is because it is so damn beautiful (compared to most other phones). I've always joked about how iPhone fans typically rave about how "sleek" and "thin" their phones are, yet they walk around with them wearing the equivalent of a down-filled parka that is anything but "sleek".
I did compromise a bit, just because I want to keep my phone looking nice. I found the Cimo clear case. It is very thin, and very clear. It has just enough of a "lip" around the edge so that the screen of the phone won't contact the ground when it is lying down (or dropped on its face). The soft rubbery cushioning should also protect against dings on the corners and back, as well as prevent scratches. All without sacrificing the beauty of the phone. I paid $10 on Amazon for it.
NEH,
I did not buy a unibody aluminium finish phone to hide it behind chinese plastic covers. Thats not my style. I have pretty much the same type of use like yours. The only thing that has happened with me is that the beats audio red sticker at the behind bottom plate is now fading off. Nothing else. Just keep keys/card holder and coins in other pocket. I dont think you need a plastic cover.
When I had my One I used the HTC hard shell - minimal design but clear so you could still see the phone. Best case I had IMO
http://shop.emea.htc.com/uk/p_htc_store_product.aspx?i=251537
Whether you can still get it is another question
I've been using this case works well still shows the phones great looks and protect it all around.
HTC One
Guys, thanks for all the replies.
But this thread is strictly about naked devices - no cases at all !
well ii put a case on it.... next time its still usable years down the road
Mine has had nothing on it except a transparent skin on the back since i bought it last May. Still looks great...
Yeah I've been running mines nekkid since I got it last April, just couldn't bring myself to spend money to cover such a good looking device. Other than some wear marks around the shiny beveled edge, there's no obvious signs of age.
I'm not rough on it, but I don't baby it either. I have dropped it a few times(on purpose, just to show people how durable it is), and run my knife across the screen and back, but no damage.
Sent from space...
jaqual said:
Yeah I've been running mines nekkid since I got it last April, just couldn't bring myself to spend money to cover such a good looking device. Other than some wear marks around the shiny beveled edge, there's no obvious signs of age.
I'm not rough on it, but I don't baby it either. I have dropped it a few times(on purpose, just to show people how durable it is), and run my knife across the screen and back, but no damage.
Sent from space...
Click to expand...
Click to collapse
And what about lens cover ? Is yout lens completely hidden, or do you have it like me ? Hidden on one side, flush with body on the other.
Do you use any kind of pouch or something ?
never ever use a case defeats point of having such a wonderful design,have a leather pouch when not in us and just treat it like a baby when in use 6 months on still pristine not a mark
Sent from my Transformer TF101 using XDA Premium 4 mobile app
remusator said:
And what about lens cover ? Is yout lens completely hidden, or do you have it like me ? Hidden on one side, flush with body on the other.
Do you use any kind of pouch or something ?
Click to expand...
Click to collapse
My lens cover is slightly recessed, so no, not like you, but haven't had any damage to it. No pouch or anything, just keep it in my pocket with my change.
Sent from space...
No case.
I am careful when I lay it down on certain surfaces.
And I try *very* hard never to let it slip out of my hands and fall.
No damage due to general wear. I dented the back slightly and roughed up one corner slightly.
Totally worth it. Love the feel and thinness of the phone.
[1] said:
Mine has had nothing on it except a transparent skin on the back since i bought it last May. Still looks great...
Click to expand...
Click to collapse
this is how i use mine. transparent cover over the back which i only put on because the aluminum is actually very slippery for me and the clear skin provides better grip so i dont drop it. clear cover over the screen and im good to go. few small areas around the front bevel where the blue has worn away but other than that its prefect. i never use a case, defeats the purpose of having a thin phone.
I Have been using it without cover, but in December it has fallen on the road so i ordered some cheap one from the e-bay.
So now, i am using it with cover, but i lost that great metal feeling of the phone.
Here is an example with and without cover
http://i.cubeupload.com/KydqLb.jpg
I don't use a case at all makes it easier to use the volume and power button
Sent from my Verizon HTC One using Tapatalk
I use no covers, just matte screen protector (I like the way my display looks with it). Bought it in June 2013. It fell on the floor several times, it got only one scratch on the top (on the lright corner), but it still looks amazing! As it's always in my pocket, lately the "beats audio" logo on the back is going away slowly... but i use nothing to protect it
NxNW said:
No case.
I am careful when I lay it down on certain surfaces.
And I try *very* hard never to let it slip out of my hands and fall.
No damage due to general wear. I dented the back slightly and roughed up one corner slightly.
Totally worth it. Love the feel and thinness of the phone.
Click to expand...
Click to collapse
+1. Dont know how long I would keep the phone. But while I have it might as well enjoy the quality feel of it.
My HTC One is about two weeks old. I love it so much, I can't bring myself to cover this baby up.
Also, I am paying for a warranty, so if anything happens to it I'll get a new one, or maybe the M8 if they run out =D