[BOOTLOGOS][N/A REMOVED] reCoded's Moto G4 Plus Boot Logo Pack - Moto G4 Plus Themes, Apps, and Mods

reCoded's Moto G4 Plus Boot Logo Pack​
Hey Moto G4 Plus users! You may know the unlocked bootloader screen and it's quite annoying to see. Well, I created these boot logos and they hide the n/a text from the boot screen! Another thing is, these boot logos use the new "Powered by Android" logo at the bottom which all 2017 phones are starting to get.
How to install
Fastboot (.bin)
First, you need to boot into the bootloader. (Power off, hold power and volume down)
Plug the phone to your computer.
Put the boot logo file that you downloaded into your fastboot folder. (Example: BlackCircleMoto.bin)
Setup fastboot and type "fastboot devices" and make sure your phone shows up.
If your phone shows up then type "fastboot flash logo logo.bin" (Replace logo.bin with the boot logo file you downloaded. Example: BlackCircleMoto.bin)
If everything goes well, you can type "fastboot reboot"
Flashable (.zip)
Just flash it in the recovery. It's that easy!
Downloads
Download the pack: http://bit.ly/rCMotoBootLogos
You will find files with the same names as these located down below:
Android
BlackCircleMoto
MotoClassic
MotoWords
Google
Lineage
LineageWhite
NougatN
OreoO
They are in the same order as the attached pictures so you can figure out which ones are which.
If you like my work, hit the thanks button!

How did you remove the "N/A" message?

Bitzinho13 said:
How did you remove the "N/A" message?
Click to expand...
Click to collapse
I used a template which shows where the n/a coordinates are and covered it up with a white image.

These look great! But when I try flashing them,I get error 6. Any idea how to fix that?

Sraichvold said:
These look great! But when I try flashing them,I get error 6. Any idea how to fix that?
Click to expand...
Click to collapse
I'll look into that. For now, just flash them using fastboot.

reCoded said:
I used a template which shows where the n/a coordinates are and covered it up with a white image.
Click to expand...
Click to collapse
Can you please send me through PM this template?

Sraichvold said:
These look great! But when I try flashing them,I get error 6. Any idea how to fix that?
Click to expand...
Click to collapse
I fixed the flashable zips.

reCoded said:
I fixed the flashable zips.
Click to expand...
Click to collapse
Give us link for flashable zip of boot logos

ADITYA_KUMAR said:
Give us link for flashable zip of boot logos
Click to expand...
Click to collapse
There is a section that says "Downloads" and then there's a link to download the boot logos.

Changelog 9/16/2017
*Add Nougat N boot logo.

reCoded said:
Changelog 9/16/2017
*Add Nougat N boot logo.
Click to expand...
Click to collapse
In love with nougat N boot logo..can any one also make Andro O bootlogo similarly..that Will be great too!

Soham Biswas said:
In love with nougat N boot logo..can any one also make Andro O bootlogo similarly..that Will be great too!
Click to expand...
Click to collapse
I was planning on making that. I'll try to make one tomorrow.

Changelog 9/17/17
*Updated thread design
*Added Oreo O boot logo

reCoded said:
Changelog 9/17/17
*Updated thread design
*Added Oreo O boot logo
Click to expand...
Click to collapse
Uploaded it already!!! You are best man!

Would love one with the Moto logo and "powered by Lineage" underneath. Great work anyway EDIT: Actually decided to create one myself, and just in case someones wondering here's the link to it

Amazing! I did the Google.bin through fastboot on my Moto G4 Plus and it worked amazingly! Thanks a lot for this! Now my phone is a bit more fancy!
:fingers-crossed:

OP Thank You
OP
Thank you Very Much for the Boot Logo's.
They are Greatly appreciated and they are ones that work for me.
I like darker ones that do not drain my battery.
I have been digging a lot lately trying to figure out how to make my own.
I have a 2 pictures I think others would like too.
They are just pictures I found on the web that represent Freedom and Adventure to me, I have tried to get them to work but with no luck.
2 attached
Thank you again.
LP
Edit: I found my answer finally after days of searching, it was right in front of me.

reCoded said:
reCoded's Moto G4 Plus Boot Logo Pack
Hey Moto G4 Plus users! You may know the unlocked bootloader screen and it's quite annoying to see. Well, I created these boot logos and they hide the n/a text from the boot screen! Another thing is, these boot logos use the new "Powered by Android" logo at the bottom which all 2017 phones are starting to get.
How to install
Fastboot (.bin)
First, you need to boot into the bootloader. (Power off, hold power and volume down)
Plug the phone to your computer.
Put the boot logo file that you downloaded into your fastboot folder. (Example: BlackCircleMoto.bin)
Setup fastboot and type "fastboot devices" and make sure your phone shows up.
If your phone shows up then type "fastboot flash logo logo.bin" (Replace logo.bin with the boot logo file you downloaded. Example: BlackCircleMoto.bin)
If everything goes well, you can type "fastboot reboot"
Flashable (.zip)
Just flash it in the recovery. It's that easy!
Downloads
Download the pack:http://bit.ly/rCMotoBootLogos
You will find files with the same names as these located down below:
Android
BlackCircleMoto
MotoClassic
MotoWords
Google
Lineage
LineageWhite
NougatN
OreoO
They are in the same order as the attached pictures so you can figure out which ones are which.
If you like my work, hit the thanks button!
Click to expand...
Click to collapse
Dude, these are the most incredible bootlogos I found around here! Would it be possible for you to create a version of them for Moto G4 Play (Harpia)? Please!!

Feliph-Cr said:
Dude, these are the most incredible bootlogos I found around here! Would it be possible for you to create a version of them for Moto G4 Play (Harpia)? Please!!
Click to expand...
Click to collapse
I don't have that device so I can't extract the logo.bin file.

working with adb
thanks alot man

Related

[UPDATED][N/A REMOVED][LOGO]Customized Logo + Remove Unlocked Bootloader message

You can remove the unlocked bootloader message as well as make some good stuff with a new logo.
Prerequisites :
Unlocked Bootloader
Adb and Fastboot
Some Faith
Steps(ADB/Fastboot Method)
Download the required attachement and unzip it
Copy the logo.bin found inside to the adb root folder
Open terminal in the folder
Enter fastboot mode in phone and plugin the device
Enter fastboot flash logo logo.bin in terminal
Enter fastboot reboot
UPDATED:
V1.Initial Release
Attachement 1
Simple logo with powered by android on it.
Attachement 2
Logo with powered by cyanogenmod on it.
V2. Changelog:
N/A REMOVED
If you have any new ideas to be put in logo. Please tell me....
There's no attachment on the post
Sent from my Moto G (4) using Tapatalk
Fixed...
I tried both both in twrp an got error 6
Sent from my Moto G (4) using XDA-Developers mobile app
Deleted
hazmatkid said:
I tried both both in twrp an got error 6
Sent from my Moto G (4) using XDA-Developers mobile app
Click to expand...
Click to collapse
some fix is to be done on script. meanwhile use adb method. I ve updated the thread.
Thanks for making the custom logos and this thread in particular.
But I'm pretty convinced that changing the logo on xt1644 doesn't do anything other than leave the "N/A" text on a black screen.
Actually nevermind, I was trying to flash the .zip not the .bin like in previous places I've read to do this
How did you made this?
I've tried it before with the same method, but that didn't work!.
This is....
Just want to make my own screens.
The adb method worked great! Thank you. That screen bothered the hell out of me for some reason.
Thanks so much for doing this! One thing I noticed is that there is still the n/a visible when I boot the phone. Is this just me?
ax.xu said:
Thanks so much for doing this! One thing I noticed is that there is still the n/a visible when I boot the phone. Is this just me?
Click to expand...
Click to collapse
Not just you, I can still see it as well.
Anyone got the logo with the warning? I know it may sound weird... but N/A overlaid on the logo bothers me even more than the warning did. Didn't think it would of course, so my bad
Thread updated. N/A Removed.
could you provide us more custom logos? or tutorial of making it?
Could you make it with a black background, eyes burn at night
Thanks for this. But, is there also a way to eliminate the 5 seconds wait during boot due to unlocked bootloader?
I tried this. But still NA is not going. Is there any other alternative??
askreddy2 said:
I tried this. But still NA is not going. Is there any other alternative??
Click to expand...
Click to collapse
try v2
@rahulsnair
You only move the "Moto" a little to the top, didn't you? ^^
So the NA is still there but no longer visible.
Bender1987 said:
@rahulsnair
You only move the "Moto" a little to the top, didn't you? ^^
So the NA is still there but no longer visible.
Click to expand...
Click to collapse
yep. for now.

logo.bin file to fastboot for unlocked bl

attached logo.bin file i midified to replace the unlocked bootloader warning
as the boot process looks for id which we do not have so it shows "n/a"
that i just covered in white arrow
motologo link:
https://forum.xda-developers.com/2015-moto-g/themes-apps/mod-change-splash-screen-various-t3182994
Nice!
Thanks, NICE, what is the format, size of the image ?
png file
1440X2560 24bit
reiteravi said:
png file
1440X2560 24bit
Click to expand...
Click to collapse
nice, could you maybe make one with a dark picture? i found some in other threads but they don't work unfortunately
Sent from my MOTO Z (XT1650-03) with Tapatalk
problem is the "n/a" us in white so u will see it if the picture us dark
so u need a white area to mask it
if i could find a way to disable this field
any picture would do
any way i will try to make a dark on sans that area
there u r
looks like this
reiteravi said:
there u r
Click to expand...
Click to collapse
thanks, works great
Sent from my MOTO Z (XT1650-03) with Tapatalk
Sorry to insist, I tried to rename the image as png, open with 7zip, all fail, how you created the image, Photshop also report unknown format
used MotoLogo.v1.1
i'm not able to find motologo anywhere. could you please provide us a link?
http://forum.xda-developers.com/showpost.php?p=69532317&postcount=250
thought i posted here as well
shortly from this thread:
http://forum.xda-developers.com/2015-moto-g/themes-apps/mod-change-splash-screen-various-t3182994
reiteravi said:
attached logo.bin file i midified to replace the unlocked bootloader warning
as the boot process looks for id which we do not have so it shows "n/a"
that i just covered in white arrow
Click to expand...
Click to collapse
Than for the logo. It works fine and the stock black warning screen was really ugly!
Only one thing... I like a lot the arrow solution BUT.... may I ask for a better Z?
It's too left positioned in my opinion and really a not so nice font used for it... what do you think about a solution with a Z partially superimposed on Moto logo on the right bottom of it?
This way even the arrow would be more "integrated" in my opinion (and both will disappear in seconds during boot)! :fingers-crossed:
Let me know your opinion on this...
it's easy:
use winlogo and edit orange.png in the projects\logo\modified\images folder
then flash it
reiteravi said:
it's easy:
use winlogo and edit orange.png in the projects\logo\modified\images folder
then flash it
Click to expand...
Click to collapse
:fingers-crossed:
And winlogo can be found...?
Any risk to brick?
http://forum.xda-developers.com/2015-moto-g/themes-apps/mod-change-splash-screen-various-t3182994
as posted 3 messages above yours....
risk ? just as any fastboot.
reiteravi said:
http://forum.xda-developers.com/2015-moto-g/themes-apps/mod-change-splash-screen-various-t3182994
as posted 3 messages above yours....
risk ? just as any fastboot.
Click to expand...
Click to collapse
Yes, I'm asking because with boot animation sometimes we can have booting issues if it isn't ok... and I'm worried of this since it goes before all booting and I don't want to brick the phone for a... Z!
than just save logo.bin from stock so u can always go back
reiteravi said:
than just save logo.bin from stock so u can always go back
Click to expand...
Click to collapse
I'm not sure this is enough... Logo.bin is used even before entering fastload mode if I don't go wrong...

[NT] Stock Logo without Warning - N/A removed (hidden)

Hello,
Since I've always received good advice and help here I'd like to give something back.
I've made a boot logo file for myself which doesn't show the warning that the device is unlocked AND I even hid the annoying "N/A".
It will first show my custom black & white Motorola logo instead of the warning and will then boot normally with the red & blue boot animation.
To apply one of the logos extract them somewhere, boot into the bootloader and execute
Code:
fastboot flash logo logo.bin
Don't flash it from a recovery or FlashFire etc.
Chris
P.S.: I also included the original logo file in case you change you mind.
Nice!
Perfect .....
Thanks
All you did was make the background white to hide the message, which flashallthetime did a while back. Is there any way to find out where the white N/A text is read from so we can remove it that way?
If you don't mind a white bootlogo, this works great.
xxBrun0xx said:
All you did was make the background white to hide the message, which flashallthetime did a while back. Is there any way to find out where the white N/A text is read from so we can remove it that way?
If you don't mind a white bootlogo, this works great.
Click to expand...
Click to collapse
You cannot get rid of the N/A unless you are able to rewrite the bootloader while keeping it signed. As soon as you tamper with it the device won't boot. Nobody was able to do this for the newer Motorola devices.
xxBrun0xx said:
All you did was make the background white to hide the message, which flashallthetime did a while back. Is there any way to find out where the white N/A text is read from so we can remove it that way?
If you don't mind a white bootlogo, this works great.
Click to expand...
Click to collapse
You are right, but not entirely. I also had to make the logo a little larger or else the N/A would've been exactly on the circle.
But yeah, it wasn't much work that I did. I just wanted to share something I created, to give the community something back, so that I don't only leech information from it.
Chris
KurrKurr said:
You are right, but not entirely. I also had to make the logo a little larger or else the N/A would've been exactly on the circle.
But yeah, it wasn't much work that I did. I just wanted to share something I created, to give the community something back, so that I don't only leech information from it.
Chris
Click to expand...
Click to collapse
Thanks again ...What you have done is great ... Serves the purpose....That's all we need ..
Is it ?:good:
the original bootlogo nougat contains N/A?
Thank you! Works as intended! No N / A Warning anymore.
KurrKurr said:
Hello,
Since I've always received good advice and help here I'd like to give something back.
I've made a boot logo file for myself which doesn't show the warning that the device is unlocked AND I even hid the annoying "N/A".
It will first show my custom black & white Motorola logo instead of the warning and will then boot normally with the red & blue boot animation.
To apply one of the logos extract them somewhere, boot into the bootloader and execute
Code:
fastboot flash logo logo.bin
Don't flash it from a recovery or FlashFire etc.
Chris
P.S.: I also included the original logo file in case you change you mind.
Click to expand...
Click to collapse
hello you could do with the original color of the zplay bike very thanks
regards
Works
100%!

Logo fix for G5+ (logo.bin)

Hi,
I created a patched version of the logo.bin for remove the "unlock message".
I use the tool "Moto Boot Logo Maker" and the original logo.bin from stock.
You can download from here:
http://www.sendspace.com/file/im0jk9
http://drive.google.com/file/d/0B-idWfPYugGvREJaR3B0UFIxUkU/view?usp=sharing
As regular, you can flash from bootloader mode using:
Code:
fastboot.exe flash logo logo-g5-fix.bin
If you like to apply from TWRP (fastboot not needed) then download this ZIP:
http://drive.google.com/file/d/0B4BcNVrbrBOzZko3VjhmRWtrVms/view?usp=drivesdk
(made by user atrac17)
I created this version as I feel the one around here is a G4 logo.bin. This uses the original logo.bin from G5.
Can you upload this on another site? Sendspace is blocked in India :/
You can get it from my Google Drive here:
https://drive.google.com/file/d/0B-idWfPYugGvREJaR3B0UFIxUkU/view?usp=sharing
OP, feel free to add it to the post
This is a great idea but it doesn't get rid of the N/A overlay... See my post here.
atrac17 said:
This is a great idea but it doesn't get rid of the N/A overlay... See my post here.
Click to expand...
Click to collapse
Not possible to fix. This overlay is printed by the bootloader that can't be rewrited. We only can replace the background image.
manos78 said:
Not possible to fix. This overlay is printed by the bootloader that can't be rewrited. We only can replace the background image.
Click to expand...
Click to collapse
Yep, I know that it can't be changed. It's at the bottom of the link I posted. I was saying it's a good idea, if you can deal with the NA overlay then the boot logo's fine. I made a flashable zip for TWRP here if you want to link it to the OP.
atrac17 said:
I made a flashable zip for TWRP here if you want to link it to the OP.
Click to expand...
Click to collapse
Done! :highfive:
Thanks. I took that and changed the logo with one the same size using the tool, saved it as flashable zip and get error 6. Error flashbooting bin too. Any idea what I'm doing wrong? [note: image is not my work]
Edit: Got it working by editing the original logo.bin
manos78 said:
Not possible to fix. This overlay is printed by the bootloader that can't be rewrited. We only can replace the background image.
Click to expand...
Click to collapse
What do you mean not possible? I got rid of it
Thank you both for the zip file and fastboot method. The boot logo looks fine with the N/A still there. It's barely noticeable. Now if I can find the Moto boot animation to match I'll be set.
I found a YouTube video of a guy from India doing it. He used the same logo, but it was a white background so you don't see the NA
zeft64 said:
What do you mean not possible? I got rid of it
Click to expand...
Click to collapse
How you rid of it, do you have the file?
ferxx17 said:
How you rid of it, do you have the file?
Click to expand...
Click to collapse
I think I do hold on I'll look for it
Here are a couple with no N/A (white letters hide it).
zeft64 said:
I think I do hold on I'll look for it
Click to expand...
Click to collapse
You removed the NA overlay from the bootloader? Please provide your method.
Awesome :good:
atrac17 said:
You removed the NA overlay from the bootloader? Please provide your method.
Click to expand...
Click to collapse
Hi,
He is doing a very simple workaround: as the overlay is printed with white letters, the logo image has blank pixels in the zone where the bootloader prints the message. Then, the print out has no effect.
manos78 said:
Hi,
He is doing a very simple workaround: as the overlay is printed with white letters, the logo image has blank pixels in the zone where the bootloader prints the message. Then, the print out has no effect.
Click to expand...
Click to collapse
Okay, so he's not removing the overlay from the bootloader. Might be a language barrier because it's misleading.
Thanks for you work, any chance of a stock logo.bin with a dark background?
JohnSmith8786 said:
Thanks for you work, any chance of a stock logo.bin with a dark background?
Click to expand...
Click to collapse
Is this what you wanted? The N/A will show on this.

Possible to edit/replace boot logo.bin after unlocking bootloader?

I received my Mi A2 Lite yesterday (yay!). I have unlocked the bootloader and have rooted. I opted not to install TWRP since backups can't be restored. The only issue I have is with the unlocked bootloader...when I boot up I get the warning message that the system has been unlocked. Is it possible to edit the logo.bin with a different image so I (we) don't need to see that anymore? I am coming from a long use of several Moto phones where I could easily create a new logo.bin with a custom picture to hide the unlocked bootloader warning. I used a program called Moto Boot Logo Maker. It appears to be catered to the Moto line but may work with the Xiaomi. If anyone can provide the stock logo.bin I can try editing it. Or at least tell me how to extract the logo.bin from my phone. I tried extracting it with Terminal Emulator but it failed saying the location didn't exist. So what I need to find is the location.
Thanks!
inside stock rom there's a file called splash.img, that i think is the bootimage, but i'm not sure the warning can be removed, i think only the bootimage could be modified.
Also take care of what you are doing because flashing splash may brick your phone in a way that only edl mode can fix.
Let me know if you find a way
I found this for the Xiaomi Mi A1. I replaced image #5 with the same Android One image that starts off the boot animation. I then resized all the images to 1080x2280 to match our device, and had to compress image #2 smaller for the program to run...but it completed without errors and gave me a splash image! I am hesitant to flash it though - the path for most devices appears to be:
/dev/block/bootdevice/by-name/splash
The path for splash image I found is:
/dev/block/platform/soc/7824900.sdhci/by-name/splash
I have included the resulting splash image for anyone brave enough to try. It is NOT flashable. It will have to be done manually through adb or Terminal Emulator.
I haven't been brave enough to flash my "new" splash.img yet. I have extracted the stock splash.img from the stock firmware download and am hoping/trying to find a way to extract/view the files/pictures on it before proceeding. I haven't had any luck using winiamge or other similar programs. Anyone have an idea to open/view the splash.img?
Success...kind of. I flashed the splash.img I posted in post #3. I no longer get the warning to lock the bootloader. Instead it boots up with a dark screen and a small linux penguin...which is really weird because I don't know where that image even came from. I used a white background that said Android One. It's better than the warning image though.
mn1968 said:
Success...kind of. I flashed the splash.img I posted in post #3. I no longer get the warning to lock the bootloader. Instead it boots up with a dark screen and a small linux penguin...which is really weird because I don't know where that image even came from. I used a white background that said Android One. It's better than the warning image though.
Click to expand...
Click to collapse
Lol success!?
mn1968 said:
Success...kind of. I flashed the splash.img I posted in post #3. I no longer get the warning to lock the bootloader. Instead it boots up with a dark screen and a small linux penguin...which is really weird because I don't know where that image even came from. I used a white background that said Android One. It's better than the warning image though.
Click to expand...
Click to collapse
I have already seen that, it happens when spash image is wrong(i think on all qualcomm devices).
ncar123 said:
Lol success!?
Click to expand...
Click to collapse
I said "Kind of"
mac12m99 said:
I have already seen that, it happens when spash image is wrong(i think on all qualcomm devices).
Click to expand...
Click to collapse
Wrong how? What would be needed to make it right?
I have replaced many logo.bin on Moto phones (qualcomm variants). It is easier though with Moto though since there is tool designed specifically for editing Moto logos. The tool I used from the Mi A1 may need to be tailored for the Mi A2 Lite but that is beyond my capability.
Does anyone know any more about how to do this? I found that when I flashed the splash.img from post #3, aside from booting with a black screen with the Linux penguin, it also messes up the image on the fastboot screen (which is nothing special as it is). That being said, fastboot still functions with ADB, just the image on the phone is messed up. I wound up reflashing the stock spash.img and am dealing with the unlocked bootloader message.
mn1968 said:
Does anyone know any more about how to do this? I found that when I flashed the splash.img from post #3, aside from booting with a black screen with the Linux penguin, it also messes up the image on the fastboot screen (which is nothing special as it is). That being said, fastboot still functions with ADB, just the image on the phone is messed up. I wound up reflashing the stock spash.img and am dealing with the unlocked bootloader message.
Click to expand...
Click to collapse
Did you manage to get any further on this? I'm considering to flash your image and get the Linux pinguin, it's better than the warning screen.
Embeeweezer said:
Did you manage to get any further on this? I'm considering to flash your image and get the Linux pinguin, it's better than the warning screen.
Click to expand...
Click to collapse
No. I kind of gave up on this. Maybe one day I'll try again.
mn1968 said:
No. I kind of gave up on this. Maybe one day I'll try again.
Click to expand...
Click to collapse
Yeah, its very annoying. I dont like that super bright white boot animation screen. I would just prefer and easily color invert :good:
I found this on Motorola One forum, it should work with A2 Lite. I didn't test it tho, I don't have unlocked bootloader.
I am using splash.img from
https://translate.googleusercontent...JrhgOvxxsyFr7imjXOCYKUEm6Y9lTRw#entry83388689
Flashed via fastboot, works on Oreo as well.
locovibe said:
I found this on Motorola One forum, it should work with A2 Lite. I didn't test it tho, I don't have unlocked bootloader.
Click to expand...
Click to collapse
I am 99.9% certain that won't work. Moto phones use a logo.bin. The Xiaomi uses a splash.img. FInding a program to edit the splash.img is the problem.
Chrono Leggionaire said:
I am using splash.img from
https://translate.googleusercontent...JrhgOvxxsyFr7imjXOCYKUEm6Y9lTRw#entry83388689[/url]
Flashed via fastboot, works on Oreo as well.
Click to expand...
Click to collapse
Your link goes to a 400 error.
Sorry, it should be fixed now.
Check post #83
Chrono Leggionaire said:
I am using splash.img from
https://translate.googleusercontent...JrhgOvxxsyFr7imjXOCYKUEm6Y9lTRw#entry83388689
Flashed via fastboot, works on Oreo as well.
Click to expand...
Click to collapse
Could you upload it here please ?
Can't download (4PDA 404 error)
No problem, credits to search0123 from 4pda.ru
deleted

Categories

Resources