Develop Bugs

Samsung Galaxy Note 2 7100N Network problem

I buy my new phone about month ago,i had 4.3 JB firmware,and then i update to 4.4.2,then i seen a problem i can't call someone,i can't use mobile internet,i can't receive a messages or a calls,i tried to downgrade again to 4.3,same problem,i tried to insert other sim card,i tried everything and nothing works,my Wi-Fi works but not Sim-Card,It says "Not Registered on Network"

bump

bump please help

Does the phone show the correct imei? Could the phone be blacklisted? Model in download mode is n7100? How did you update to 4.4.2?

Download and install MobileOdin, copy stock 4.3 on your device then install ROM from device.

tin2404 said:
Download and install MobileOdin, copy stock 4.3 on your device then install ROM from device.
Click to expand...
Click to collapse
Uradio sam to,idalje isti problem

audit13 said:
Does the phone show the correct imei? Could the phone be blacklisted? Model in download mode is n7100? How did you update to 4.4.2?
Click to expand...
Click to collapse
I know nothing about IMEI,i update it with Odin.

If the phone does not have the correct imei #, it will not connect to a carrier network.

check your IMEI by typing in the dialing screen *#06# and see if its start at 0499 or its on Null/Invalid
i had a similar problem which i updated from 4.1.2 to 4.2.2
the IMEI was correct but it still was stuck on emergency call only
i found this modem file which helped me.
i tried flashing all kind of roms with this modem but it was pointless..
until i tried flashing that Omega v4.2.2 rom and then flashed the modem again
and it actually worked..no clue how did it work on the Omega and not for the others but oh well..
now im on CyanogenMod 5.1.1 and the phone is fully working.
If you planning on doing something like that (messing with your phone rom and such..) dont forget to make a FULL backup.

kapac7a said:
I buy my new phone about month ago,i had 4.3 JB firmware,and then i update to 4.4.2,then i seen a problem i can't call someone,i can't use mobile internet,i can't receive a messages or a calls,i tried to downgrade again to 4.3,same problem,i tried to insert other sim card,i tried everything and nothing works,my Wi-Fi works but not Sim-Card,It says "Not Registered on Network"
Click to expand...
Click to collapse
I had similar problem and worked fine..download 4.3 or 4.4.2 from Sammobile stock XEO Poland or XEF France ROM. They have modem we in Croatia use. Problem is not in ROM then in your modem or your device is locked on one carier but you have wrong different carier SIM.
Or just look here for modems then flash it with Odin but over computer.In ODIN check "nand erase all".
Of course you need to wipe everything ,flash ROM then flash modem separatly but it MUST BE XEO or XEF modem !

No SIM card recognised after several "modifications" A320FL

Model : A320FL
Alright. I'll try to be as straightforward as possible.
I used to be on Marshmallow, unmodified, stock XEF (Orange) firmware.
Back in September I switched to a PHE (spain) 7.0 firmware because I needed Nougat and it wasn't available for me.
It worked perfectly, no region problem or anything as I had selected Re-Partition in Odin.
Here comes the problem.
Yesterday I decided I wanted to get Lineage OS. What I didn't see is that it was running under 8.1...
I got tired of this version of Android very quickly so I decided to go back to my spanish, 7.0 firmware.
EXCEPT I was getting the sw. rev. check device 2 binary 1 error, which I found out by Googling is some sort of lock that prevents you from downgrading...
So I tried flashing all (AP, CP, CSC) EXCEPT the BL. Surprisingly, it worked.
Except...
Now my phone doesn't recognise my SIM card anymore. I've rebooted it, taken the SIM out, wiped cache, FACTORY RESET... Everything.
What can I do?! Would downloading a FRENCH (XEF) firmware make it work? Please! I need a working data plan...

You have to flash BL else radio wont work .

shiwan said:
Model : A320FL
Alright. I'll try to be as straightforward as possible.
I used to be on Marshmallow, unmodified, stock XEF (Orange) firmware.
Back in September I switched to a PHE (spain) 7.0 firmware because I needed Nougat and it wasn't available for me.
It worked perfectly, no region problem or anything as I had selected Re-Partition in Odin.
Here comes the problem.
Yesterday I decided I wanted to get Lineage OS. What I didn't see is that it was running under 8.1...
I got tired of this version of Android very quickly so I decided to go back to my spanish, 7.0 firmware.
EXCEPT I was getting the sw. rev. check device 2 binary 1 error, which I found out by Googling is some sort of lock that prevents you from downgrading...
So I tried flashing all (AP, CP, CSC) EXCEPT the BL. Surprisingly, it worked.
Except...
Now my phone doesn't recognise my SIM card anymore. I've rebooted it, taken the SIM out, wiped cache, FACTORY RESET... Everything.
What can I do?! Would downloading a FRENCH (XEF) firmware make it work? Please! I need a working data plan...
Click to expand...
Click to collapse
It's available so just flash it.
https://updato.com/firmware-archive-select-model?record=3AAA073D05EB11E89F15FA163EE8F90B

S9 Message Your current software version isn't supported. Visit a service centre

Hi first post, please be gentle
I've got an s9 which is on EE UK, I flashed the phone with stock firmware, I did run into a couple of issues where when flashing the phone it got stuck on odm.img so I had to start again but using CSC and not home CSC so I lost everything
When the phone rebooted, it started up in German, so as I had my sim card in, it restarted in English
I'm using the following
G960FXXU2CSA2/G960FOXM2CSA2/G960FXXS2BRK3
Service provider SW SAOMC_SM-G960F_OXM_DBT_PP_0009
DBT/XEU/EVR
When I check for updates I get the following
Your current software version isn't supported. Visit a service centre
Can anyone help on how to put this right, I want to stay on stock firmware, not EE firmware
Thanks in advance

Good morning, I have a problem with my S9 model G9600 which came from the factory with the firmware of Hong Kong, however I tried to change the firmware for the one in Colombia because some voice services of the operators only work with the software of the country. But when trying to flash the part of CSC I mark the error and obviously the installation fails as in a kind of A brick because the logo of Galaxy S9 does not pass and is only solved by reinstalling the firmware with which it came from the factory; I have already made sure that the binary is the same, however I can not find a solution. I attach photos of the error.

dancevision said:
Hi first post, please be gentle
I've got an s9 which is on EE UK, I flashed the phone with stock firmware, I did run into a couple of issues where when flashing the phone it got stuck on odm.img so I had to start again but using CSC and not home CSC so I lost everything
When the phone rebooted, it started up in German, so as I had my sim card in, it restarted in English
I'm using the following
G960FXXU2CSA2/G960FOXM2CSA2/G960FXXS2BRK3
Service provider SW SAOMC_SM-G960F_OXM_DBT_PP_0009
DBT/XEU/EVR
When I check for updates I get the following
Your current software version isn't supported. Visit a service centre
Can anyone help on how to put this right, I want to stay on stock firmware, not EE firmware
Thanks in advance
Click to expand...
Click to collapse
You need to flash the XEU firmware, you have the German DBT firmware running right now

same issue, i have a hungarian telenor phone which suppoesed to be (PAN) , i flashed XEH which is hungarian, but it said software version not supported visit a support center , so i flashed the PAN 9.0 version and it still says this

Did you find any solution for this?

Bizzhub said:
Did you find any solution for this?
Click to expand...
Click to collapse
are you having an identical issue? i ask that because resolutions are very specific. Flashing firmware from www.sammobile.com/firmwares is very commonly the fix for a great many issues, but id hate to have you go thru the trouble of doing so if its not necessary

I tried flashing using odin but didnt work. btw, im using SM-965U and currently residing in Thailand. I dont know if this is the reason why I cant update at all.

S9 message
I am in the U.S. and am getting the message that software isn't supported also. Is there any resolution to this problem?

In case it helps, I was having this same issue with my unlocked Galaxy Note 10+. I found this thread after searching. I had gotten into this situation by flashing CP/AP/BL from TMO firmware without also flashing TMO's CSC or USERDATA. I avoided CSC/USERDATA (I was using the home CSC) because I wanted to avoid wiping the phone.
When I finally gave up and flashed CSC and USERDATA, everything was back to normal.

hueboy said:
I am in the U.S. and am getting the message that software isn't supported also. Is there any resolution to this problem?
Click to expand...
Click to collapse
have you tried flashing the stock firmware via Odin?
ThugEsquire said:
In case it helps, I was having this same issue with my unlocked Galaxy Note 10+. I found this thread after searching. I had gotten into this situation by flashing CP/AP/BL from TMO firmware without also flashing TMO's CSC or USERDATA. I avoided CSC/USERDATA (I was using the home CSC) because I wanted to avoid wiping the phone.
When I finally gave up and flashed CSC and USERDATA, everything was back to normal.
Click to expand...
Click to collapse
thats usually the fix. Glad you got it working
Bizzhub said:
I tried flashing using odin but didnt work. btw, im using SM-965U and currently residing in Thailand. I dont know if this is the reason why I cant update at all.
Click to expand...
Click to collapse
what is the issue after you flash in Odin?

Different region firmware please read

I bought a A50 from ebay it was a SM-A505F/DS unlocked etc its a 4GB 128GB model
now i downloaded the xeu firmware for the UK and flashed via oden and everything flashed and it worked but when I try to check for updates it says processing failed when checking for updates
IT DOES NOT EVEN REGISTER TO THE UPDATE SERVER.
I TRIED WITH THE VODAFONE UK FIRMWARE O2 FIRMWARE BTU FIRMWARE AND XEU FIRMWARE ALL HAVE THE SAME ISSUE
this phone is an XSG model the firmware i used was from the SM-A505FN phone
why does everything work but updates anyone know how to resolve this.

Well if it does not work then you should keep your eye on the samsung's official galaxy a50 development page, and if update is available download the firmware and flash it with odin... Dont worry none of your data will be gone.. and btw if your bootloader is unlocked you wont get updates..

cooldude20000 said:
I bought a A50 from ebay it was a SM-A505F/DS unlocked etc its a 4GB 128GB model
now i downloaded the xeu firmware for the UK and flashed via oden and everything flashed and it worked but when I try to check for updates it says processing failed when checking for updates
IT DOES NOT EVEN REGISTER TO THE UPDATE SERVER.
I TRIED WITH THE VODAFONE UK FIRMWARE O2 FIRMWARE BTU FIRMWARE AND XEU FIRMWARE ALL HAVE THE SAME ISSUE
this phone is an XSG model the firmware i used was from the SM-A505FN phone
why does everything work but updates anyone know how to resolve this.
Click to expand...
Click to collapse
How do you expect it to work by flashing the wrong firmware? You’re flashing a NFC model firmware on a Non-NFC model. Download the desired region firmware for A505F, Remove your sim and flash the firm via Odin.

SM-G960N Unbranded firmware.

Hello to everybody,
I have a Galaxy S9, model SM-G960N and finally the Korean Update to Android 10 arrived, downloaded it from SamMobile (The unbranded version KOO) Flashed it without problems and the phone works as intended. Only it doesn't have KOO as CSC, it has SKC, which has bloatware and it isn't the one I flashed. What gives? Why does it do that, are there any workarounds? Here's what I've tried until now:
Downloaded, and flash numerous times, no result, I don't live in Korea, I don't have a Korean SIM, phone still reports SKC.
Flashing with or without sim card inserted gives the same result.
Can't flash any other CSC, other than Korean ones, Odin spits out an error and it does not even start the flashing process.
Mix and matching different CSC with different firmware's obviously not successful.
Any idea if something can be done about this?
Thank you in advance.

You need to root it and change CSC with phone info app to KOO

numpea said:
You need to root it and change CSC with phone info app to KOO
Click to expand...
Click to collapse
I guess that's the only remaining way, but do you know why it picks SKC instead of KOO, even if the firmware that I'm downloading is KOO.

Korean CSC is a multiCSC even if you download KOO firmware you phone will use SKC that's included in the CSC so there is no different korean csc there's only one that includes the 4 csc codes

i have rooted device but i need multilanguage. ho i can debrand or add orginal languages?

tejanaqkilica said:
Hello to everybody,
I have a Galaxy S9, model SM-G960N and finally the Korean Update to Android 10 arrived, downloaded it from SamMobile (The unbranded version KOO) Flashed it without problems and the phone works as intended. Only it doesn't have KOO as CSC, it has SKC, which has bloatware and it isn't the one I flashed. What gives? Why does it do that, are there any workarounds? Here's what I've tried until now:
Downloaded, and flash numerous times, no result, I don't live in Korea, I don't have a Korean SIM, phone still reports SKC.
Flashing with or without sim card inserted gives the same result.
Can't flash any other CSC, other than Korean ones, Odin spits out an error and it does not even start the flashing process.
Mix and matching different CSC with different firmware's obviously not successful.
Any idea if something can be done about this?
Thank you in advance.
Click to expand...
Click to collapse
i've to face the same thing mine is KTC but it shows SKC. idk what to do after did that always my device is getting overheat