{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am not responsible for anything that may happen to your phone as a result of installing custom roms and/or kernels. you do so at your own risk and take the responsibility upon yourself.
Part -A Configure Computer
1) Download and extract the Stock firmware, Setup tools & Drivers
2) Install ADB Drivers
3) Install Lenovo ZUK Z2 PLUS (2132) Drivers
4) Setup Tool all in one
5) Setup Mi Flash tool
Part -B Booting device in to EDL Mode
Note : Thank to @mauronofrio for his tool
1) Enable Android debugging (ADB) in developer options
2) Connect your device to PC
3) open Tool all in one
4) The tool detects your device and pop up a window on your z2 plus device
5) chick and click OK
6) Know go to Tool all in one > Advance Options
7) click Reboot EDL
8) Device will boot in to EDL Mode
Part -C Flashing stock Firmware
1) Open Mi Flash tool
2) Click on refresh to detect your Z2 plus as COM X ( Note : X represents device port numbers )
3) If you want to lock bootloader then select " clear all and lock " which was present on right bottom corner
4)Click on flash
Note : Never disconnect your device while MI tool was flashing
5) It take 300 sec to complete task after that hold power key for 15 sec to boot your device
Lenovo ZUK Z2 Plus ( 2132) Marshmallow
Indian firmware ( Note : all partitions fixed by me :good: )
Mi Flash tool ( Note : Recommended and Modified version by Me for deep partitions:fingers-crossed: )
Tool All In One ( Note : for Booting in to EDL, flashing TWRP , Unlock & lock bootloader )
adb-setup ( Note : Very important )
Other useful links ( If you want )
Drivers
PdaNet
Qualcomm_QHSUSB
ZUK_Z2132_drivers_V1.0.5
Tools
QPST
@ZUK ................................... for device
@zukfans.eu ..................... for source
@Francko76 .................... for source
@xiaomi .............................. for MI Flash tool
@mauronofrio ................. for Tool All In One
@Annabathina .................. for fixing deep partitions
@XDA ................... developers for helping me
@lenovo forum ........... developers
Lenovo ZUK Z2 Plus ................. Model 2132
XDA:DevDB Information
[Rom][6.0.1]Lenovo ZUK Z2 PLUS (2132) INDIAN firmware V2.0.093ST using MI Flash tool, ROM for the Lenovo ZUK Z2 (Plus)
Contributors
Annabathina
ROM OS Version: 6.0.x Marshmallow
Based On: Stock rom
Version Information
Status: Stable
Current Stable Version: 2.0.093
Stable Release Date: 2016-08-11
Created 2017-09-25
Last Updated 2017-09-25
Reserved
Reserved
redserved
Which is better
Which stock rom 7.0 or 6.0 ...is best for battery...
Vimi12 said:
Which stock rom 7.0 or 6.0 ...is best for battery...
Click to expand...
Click to collapse
6.0.. less bugs too
If i flash this rom will my warranty be restored? Currently i am on aicp
harshmehta29 said:
If i flash this rom will my warranty be restored? Currently i am on aicp
Click to expand...
Click to collapse
Yes your device will be like when you purchased.
Help me
Does my phone get ota updates after flashing the rom??????
have you tried ...?
have you flashed this rom. and are able to get ota ?
---------- Post added at 12:28 PM ---------- Previous post was at 12:25 PM ----------
adil786ali63 said:
6.0.. less bugs too[/you got ota 7.0 after falshing this rom ??
Click to expand...
Click to collapse
cant get ota update
hi, i flashed as mention above but now the problem is that i cant get ota update to zui 2.0.133 and android 7.0
phone is bootloader unlocked and rooted, is there any other steps i need to do before flashing back to the original firmware ? or just go ahead and follow instruction on the OP ?
omki511 said:
hi, i flashed as mention above but now the problem is that i cant get ota update to zui 2.0.133 and android 7.0
Click to expand...
Click to collapse
same problem here, I am going to flash using qfil and will update here.
Lenovo z2 plus flashing
Please don't use Mi flash tool, it was not properly flashing.Use qfil for proper flashing.
---------- Post added at 09:30 AM ---------- Previous post was at 09:27 AM ----------
arun356y said:
same problem here, I am going to flash using qfil and will update here.
Click to expand...
Click to collapse
Flash stock room again with qfil and after that you will definitely get ota updates.
[email protected] said:
Please don't use Mi flash tool, it was not properly flashing.Use qfil for proper flashing.
---------- Post added at 09:30 AM ---------- Previous post was at 09:27 AM ----------
Flash stock room again with qfil and after that you will definitely get ota updates.
Click to expand...
Click to collapse
yeah I flashed 2.5 104 ST and now its working fine
I flash rom using QFIL but it still shows me "system has been root" in System Update app
I flash rom with "unlock" the bootloader as well as "relock" bootloader... but i can't able to update.
It's not working....
meetgajjar31 said:
I flash rom using QFIL but it still shows me "system has been root" in System Update app
I flash rom with "unlock" the bootloader as well as "relock" bootloader... but i can't able to update.
It's not working....
Click to expand...
Click to collapse
Can you help me in flashing through qfil??
---------- Post added at 12:45 PM ---------- Previous post was at 12:44 PM ----------
How to flash through qfil ??
Will i be able to get system update after flashing this if the bootloader is locked?
anyone using the zui 2.0 marshmallow build? What's the SOT.. I'm currently on Chinese zui 3.1, hoping to get back to Indian zui 2.0 because of double notification but the battery life of Chinese zui 3.1 is good as i easily get 7hr 30 to 8hr even with moderate to heavy usage
SteelBodyX said:
anyone using the zui 2.0 marshmallow build? What's the SOT.. I'm currently on Chinese zui 3.1, hoping to get back to Indian zui 2.0 because of double notification but the battery life of Chinese zui 3.1 is good as i easily get 7hr 30 to 8hr even with moderate to heavy usage
Click to expand...
Click to collapse
How do you get that much of SOT i barely got 5.30 hrs max sot
Related
Hey friends.
Update 19 sept. 2016 Cyanogenmod 13 available http://forum.xda-developers.com/android/general/cyanogenmod-13-lenovo-k4-note-t3464788
*
Update:Lenovo k4 Note marshmallow twrp recovery
Check here http://forum.xda-developers.com/k4-note/development/lenovo-k4-note-marshmallow-twrp-root-t3368937 thanks to @ramisumi
Update: successful in installing custom recovery as well as unlocking bootloader
Heres the tutorial http://forum.xda-developers.com/android/general/k4-note-bootloader-unlock-twrp-t3346546#post66071541
Since the device has not its own forum till then I tried to join all the discussions for our Lenovo Vibe K4 Note at one platform.
Meanwhile i will start from its rooting process heres the tutorial for it
http://forum.xda-developers.com/android/help/root-lenovo-vibe-k4-note-t3313481 -oh yes credits for post goes to me but the method was found by Rootandroidz team-Thanks
Now while trying to root some friends may have done something to system folder
So i bring most needed thing -The Stock Rom heres it
http://forum.xda-developers.com/general/general/stock-rom-lenovo-k4-note-t3312345 -again thanks to @Shakib123 for valuable post and RootAndroidz for stock rom.
Ok now comes the valuable OTA updates heres it
http://forum.xda-developers.com/android/general/ota-captured-vibe-k4-note-t3310282 -thanks to @abhish3k9 and to me also for some updates.
You may also be interested in Installing SuperSU & Xposed- oh yes its possible. Heres it
http://forum.xda-developers.com/android/help/lenovo-k4-note-xposed-supersu-t3335732/ -Thanks to me for the post ,Rovo89 for Xposed, chainfire for flashfire
heres the discussion thread for k4 note recovery
http://forum.xda-developers.com/android/help/lenovo-vibe-k4-note-recovery-t3310722 -thanks to @shameet for creating valuable thread.
Discussions are on , join them.
This thread is to join all the discussions.
If you don't like twrp or flashfire method you can try installing xposed via this method
http://forum.xda-developers.com/android/general/how-to-install-xposed-framework-lenovo-t3363786 thanks to @Krishnas096
All credits and links goes to the original thread makers.
Press thanks button�� if helped.
UPDATE: official Marshmallow update for lenovo k4 note has started rolling out.
http://phonedl.ota.lenovomm.com/dls...OW_TO_A7010a48_S202_160316_ROW_WCB5490CE7.zip
UPDATE 2: Bootloader after marshmallow update can be unlocked fine
Heres it http://forum.xda-developers.com/gen...novo-k4-note-bootloader-t3343864#post66010147
Reserved 3
Reserved 2
Reserved 1
Thanks for your helpful information
Android m for Lenovo K4 note link :http://www.droidfull.com/2016/03/k4-note-update.html?m=1
Sent from my Lenovo A7010a48 using XDA Premium 4 mobile app
Is it official update ??
Vcsheel said:
Is it official update ??
Click to expand...
Click to collapse
Yes, source is from Lenovo. but not for India
Sent from my Lenovo A7010a48 using XDA Premium 4 mobile app
Yes friends its confirmed official marshmallow update has started rolling out. My friend's device has asked about new update available of about 1.4gb. But i am one update behind him so didn't got update . but i got the link from his mobile here it is
http://phonedl.ota.lenovomm.com/dls...OW_TO_A7010a48_S202_160316_ROW_WCB5490CE7.zip
Mirror https://userscloud.com/c13b2auv6tjw
check this out
I came across this link on fb, and this guy says he has flashed the above rom from that link,could some one verify on how it could be done for those who have rooted with kingroot.
Thanks in advance.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i have installed the MM update but got back to 5.1 i cant live without root lol
waiting till it can be rooted
crazylife said:
i have installed the MM update but got back to 5.1 i cant live without root lol
waiting till it can be rooted
Click to expand...
Click to collapse
Sorry bro but did you tried fastboot oem unlock -may be lenovo had allowed to unlock it(but chances are 0.1/100)
Did also kingroot not worked?
gursewak.10 said:
Sorry bro but did you tried fastboot oem unlock -may be lenovo had allowed to unlock it(but chances are 0.1/100)
Did also kingroot not worked?
Click to expand...
Click to collapse
Yes was trying kingroot but no succes
And dont want to unlock bootloader now maybe they can root mm without unlocking
Hope soon as they said
crazylife said:
i have installed the MM update but got back to 5.1 i cant live without root lol
waiting till it can be rooted
Click to expand...
Click to collapse
Did anyone find a way to flash MM update on a rooted 5.1 k4 note without flashing the stock rom again?
---------- Post added at 10:24 AM ---------- Previous post was at 10:12 AM ----------
priyank.g said:
Hello guys!
I flashed Marshmallow for the K4 note from http://www.techolite.com/35528/lenovo-k4-note-marshmallow-6-0-update-official.html and it works smoothly with some bugs here and there.
Okay so coming to the bootloader unlock part,
After flashing Marshmallow, which definitely works,
Enable Developer Options in the Setting by tapping on 'Build Number' under About Phone in settings in Device Information
Then go back
Now you'll see a new option called 'Developer Options'
Click on it
Check for 'Enable OEM Unlock'
then move the switch to 'ON'
Enable USB Debugging
Connect your device to the PC
then open command prompt
navigate to adb(You need adb and fastboot)
now under command prompt type 'adb reboot-bootloader'
now your phone will reboot to Fastboot Mode
Now in CMD type 'fastboot OEM Unlock'
then on your device,
Press the 'Volume UP button'
your device will be formatted and will reboot to fastboot again.
Press and hold the Power button and it will shut down and then press and hold again and your device will start
NOTE:-This Bootloader unlock must be performed by advanced users, Also the Marshmallow ROM can't be rooted using kingroot Thats the only downside.. But still..
I tested this 'RIGHT NOW' and just typed this thread in case a developer can now create ROMs and stuff.
This is my first 'Development Related thread' so if this isn't the right place to place it, please move it if necessary
Do press THANKS if this helped you in any way.
Click to expand...
Click to collapse
grusewak.10 add this thread link to your post, Thanks
http://forum.xda-developers.com/gen...novo-k4-note-bootloader-t3343864#post66010147
gursewak.10 said:
UPDATE: official Marshmallow update for lenovo k4 note has started rolling out.
http://phonedl.ota.lenovomm.com/dls...OW_TO_A7010a48_S202_160316_ROW_WCB5490CE7.zip
Mirror https://userscloud.com/c13b2auv6tjw
Click to expand...
Click to collapse
Sir can you please list the bugs if any present in marshmallow update..
kiran2508 said:
Did anyone find a way to flash MM update on a rooted 5.1 k4 note without flashing the stock rom again?
---------- Post added at 10:24 AM ---------- Previous post was at 10:12 AM ----------
grusewak.10 add this thread link to your post, Thanks
http://forum.xda-developers.com/gen...novo-k4-note-bootloader-t3343864#post66010147
Click to expand...
Click to collapse
Yeah sure
But could you share its screenshot or a pic by other phone
Just do this
Connect your bootloader unlocked phone to pc
Usb debugging on
In cmd type adb rebbot bootloader
Now in fastboot mode type
fastboot getvar all
Now provide pic of the result of this command.
I recommend adding a text of your name on pic so to avoid other's claim but don't place any text to hide any info other than IMEI.
Good news friends unlocked boot loader in lollipop ROM and installed twrp recovery and it worked.
Sadly phone after 3-4 boots got stucked in bootloop and had to reflash stock ROM.
So I think the days are very near for our phone with custom recovery installed.
The countdown has started friends.
gursewak.10 said:
Good news friends unlocked boot loader in lollipop ROM and installed twrp recovery and it worked.
Sadly phone after 3-4 boots got stucked in bootloop and had to reflash stock ROM.
So I think the days are very near for our phone with custom recovery installed.
The countdown has started friends.
Click to expand...
Click to collapse
How did you do that in lollipop rom?
Sent from my Lenovo A7010a48 using XDA Premium 4 mobile app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi,
Here is PAC MM 6 for the Lenovo Vibe K5 and K5 Plus
It's in a very alpha/experimetal state for now !
It's now in a quite Stable state for now ! Enjoy it
For now the build has been tested and developped on the A6020a40 variant.
It has been tested and validated on other variants by the community:
A6020a40
A6020l36
A6020l37
A6020a46 (2GB RAM)
A6020a46 (3GB RAM)
K32C36 (Lemon 3)
Requirements:
My TWRP 3.0.2.0 build: Recovery TWRP 3.0.2.0 for Lenovo Vibe K5
How to install:
From stock
Copy the ROM zip on your phone
Reboot in TWRP Recovery mode
Backup your phone!
Format/Wipe system, cache, dalvik, data
Flash/Install ROM
Flash Install Gapps (OpenGapps ARM MM Mini or smaller is recommanded) [ since 2016-08-01 build, Gapps ARM64 is compatible ]
Reboot
Upgrade from previous build
Copy the ROM zip on your phone
Reboot in TWRP Recovery mode
Format/Wipe only cache, dalvik
Flash/Install ROM (don't flash gapps! or it will not boot)
Reboot
Builds Downloads:
http://moto.shreps.fr
XDA:DevDB Information
[ROM][OFFICIAL][6.0.1][A6020] PAC-ROM 6 MM - Lenovo Vibe K5, K5 Plus, ROM for all devices (see above for details)
Contributors
Shreps, scritch007
Source Code: https://github.com/boulzordev/android_device_lenovo_A6020
ROM OS Version: 6.0.x Marshmallow
ROM Firmware Required: TWRP 3 Recovery
Based On: PAC-Man ROM
Version Information
Status: Stable
Created 2016-06-30
Last Updated 2016-11-15
Status
Working:
Screen/Graphics/Touch
RIL
Data/LTE
LED
HapticFeedback
Vibration
WiFi
Camera
MTP
Bluetooth
WiFi hotspot
Builtin ROOT (to enable in Developer Options)
Accelerometer
GPS
Audio
Media decoding
Charger/Power managment
CPU Core handling
Sensors
Encryption
Handle all variant and set custom properties (LCD Density is the priority)
Single SIM detection
Video Recording
Brightness steps
Almost working/buggy:
LED Colors
Hardware H264 acceleration (affect also streaming video playback)
Not working/Issues:
Kernel doesn't handle Download Mode key combo boot, but Download mode is available with
Code:
adb reboot edl
Reserved
@ Non European users, please test the ROM on your variant (A6020a46, A6020l36, l37)
and report back to us with a maximum of informations:
- logcat, dmsg, pstore logs
- which build you tried
- how to reproduce bugs
It have built-in root?
@romulocarlos Can you test it on your K5 plus? I'm currently having super slow internet.
---------- Post added at 11:25 AM ---------- Previous post was at 11:22 AM ----------
Shreps said:
Hi,
Here is PAC MM 6 for the Lenovo Vibe K5
It's in a very alpha/experimetal state for now !
For now the build has been tested only on the A6020a40 variant.
Requirements:
My TWRP 3.0.20 build: Recovery TWRP 3.0.2.0 for Lenovo Vibe K5
How to install:
From stock
Copy the ROM zip on your phone
Reboot in TWRP Recovery mode
Backup your phone!
Format/Wipe system, cache, dalvik, data
Flash/Install ROM
Flash Install Gapps
Reboot
Upgrade from previous build
Copy the ROM zip on your phone
Reboot in TWRP Recovery mode
Format/Wipe only cache, dalvik
Flash/Install ROM (don't flash gapps! or it will not boot)
Reboot
Unoffical Experimental builds Downloads:
http://moto.shreps.fr
XDA:DevDB Information
[ROM][UNOFFICIAL][6.0.1][A6020] PAC-ROM 6 MM - Lenovo Vibe K5, ROM for all devices (see above for details)
Contributors
Shreps, scritch007
Source Code: https://github.com/boulzordev/android_device_lenovo_A6020
ROM OS Version: 6.0.x Marshmallow
ROM Firmware Required: TWRP 3 Recovery
Based On: PAC-Man ROM
Version Information
Status: Testing
Created 2016-06-30
Last Updated 2016-06-30
Click to expand...
Click to collapse
Any screenshots, sir?
---------- Post added at 11:25 AM ---------- Previous post was at 11:25 AM ----------
Shreps said:
Hi,
Here is PAC MM 6 for the Lenovo Vibe K5
It's in a very alpha/experimetal state for now !
For now the build has been tested only on the A6020a40 variant.
Requirements:
My TWRP 3.0.20 build: Recovery TWRP 3.0.2.0 for Lenovo Vibe K5
How to install:
From stock
Copy the ROM zip on your phone
Reboot in TWRP Recovery mode
Backup your phone!
Format/Wipe system, cache, dalvik, data
Flash/Install ROM
Flash Install Gapps
Reboot
Upgrade from previous build
Copy the ROM zip on your phone
Reboot in TWRP Recovery mode
Format/Wipe only cache, dalvik
Flash/Install ROM (don't flash gapps! or it will not boot)
Reboot
Unoffical Experimental builds Downloads:
http://moto.shreps.fr
XDA:DevDB Information
[ROM][UNOFFICIAL][6.0.1][A6020] PAC-ROM 6 MM - Lenovo Vibe K5, ROM for all devices (see above for details)
Contributors
Shreps, scritch007
Source Code: https://github.com/boulzordev/android_device_lenovo_A6020
ROM OS Version: 6.0.x Marshmallow
ROM Firmware Required: TWRP 3 Recovery
Based On: PAC-Man ROM
Version Information
Status: Testing
Created 2016-06-30
Last Updated 2016-06-30
Click to expand...
Click to collapse
Thanks for this, btw ?
@bittooshubham
I can't test it for now. I just received my phone from warranty, and testing the battery performance. And this ROM is for A40, my phone is L36. When I used A40 on my L36 I was receiving a lot of force close regarding framework and/or system.ui and/or settings, and others...
Have you checked your internet or 4g settings?
sullivan781 said:
It have built-in root?
Click to expand...
Click to collapse
Yes
bittooshubham said:
Any screenshots, sir?
Thanks for this, btw
Click to expand...
Click to collapse
On the screenshot tabs
romulocarlos said:
@bittooshubham
I can't test it for now. I just received my phone from warranty, and testing the battery performance. And this ROM is for A40, my phone is L36. When I used A40 on my L36 I was receiving a lot of force close regarding framework and/or system.ui and/or settings, and others...
Have you checked your internet or 4g settings?
Click to expand...
Click to collapse
We will try to make it "universal" on all A6020 variants with @scritch007
But we need you to test and report and post logs for this
Shreps said:
We will try to make it "universal" on all A6020 variants with @scritch007
But we need you to test and report and post logs for this
Click to expand...
Click to collapse
Any chance of losing IMEI after flashing? How can I backup IMEI?
bittooshubham said:
Any chance of losing IMEI after flashing? How can I backup IMEI?
Click to expand...
Click to collapse
I don't think so, because you will flash a ROM and not a Firmware. So only system and boot are modified.
Shreps said:
I don't think so, because you will flash a ROM and not a Firmware. So only system and boot are modified.
Click to expand...
Click to collapse
If I get bootloop or soft brick it. Can i restore back using backup of Stock ROM taken through your TWRP?
bittooshubham said:
If I get bootloop or soft brick it. Can i restore back using backup of Stock ROM taken through your TWRP?
Click to expand...
Click to collapse
Backup your stock ROM...
bittooshubham said:
If I get bootloop or soft brick it. Can i restore back using backup of Stock ROM taken through your TWRP?
Click to expand...
Click to collapse
The VERY FIRST THING you must do is a FULL BACKUP with TWRP. Whit this backup you can restore your phone if you get bootloop. And if you softbrick your phone, you can restore it with the ORIGINAL ROM of your phone with QFIL, and then restore your full backup you made first.
So, find original ROM of your phone and keep it in a safe place, make a backup and... let's go!
@ Shreps I think it's necessary to say that arm64 gapps is incompatible.
---------- Post added at 02:28 PM ---------- Previous post was at 01:45 PM ----------
[/COLOR @Shreps I just installed on l36 and works fine (in terms of what is working), but the corners of my screen are blinking red.
sullivan781 said:
@ Shreps I think it's necessary to say that arm64 gapps is incompatible.
---------- Post added at 02:28 PM ---------- Previous post was at 01:45 PM ----------
[/COLOR @Shreps I just installed on l36 and works fine (in terms of what is working), but the corners of my screen are blinking red.
Click to expand...
Click to collapse
Thx for your feedback!
About Red Border screen, it's normal, the ROM is built in debug mode until everything is fixed
Do you have RIL/phone/Data/LTE on your variant ?
It's working on K32C36(Chinese version of K5 Plus) only thing I notice now is Gello is FC
and the default DPI is...320? It seems that the system recognize this device as tablet?
jwchen119 said:
It's working on K32C36(Chinese version of K5 Plus) only thing I notice now is Gello is FC
and the default DPI is...320? It seems that the system recognize this device as tablet?
Click to expand...
Click to collapse
Nice
About Gello, you need make a user installation of the APK (use File Explorer, and install /system/app/Gello/Gello.apk) to make it works.
or install and use Chrome
About the DPI, 320 is the right density for the A6020a40 variant (I have) because of it's 1280x720 resolution.
Your variant might have a bigger resolution, you can try to change the Density in Settings/Display/LCD Density and use a bigger one.
Or set 480 in your build.prop
We will check if we can set the right density depending of the variant.
And what about RIL/Data/LTE? Working on your variant too ?
@Shreps I just found a bug! When I lock my screen, it turns black instead of turn off. And another thing: I can't access download mode anymore, so I can't restore the stock rom for now using QFIL, only by TWRP Backup.
EDIT:
Brightness control doen't work too.
jwchen119 said:
It's working on K32C36(Chinese version of K5 Plus) only thing I notice now is Gello is FC
and the default DPI is...320? It seems that the system recognize this device as tablet?
Click to expand...
Click to collapse
This is the kind of things we'll need to know in order to try to make it work best on all devices.
We can introduce a specific init.c that will set variables depending on the device.
In order to do so, send us the result of a adb shell getprop once the rom is fully booted. We'll try to find some specific information to use.
---------- Post added at 04:08 PM ---------- Previous post was at 04:05 PM ----------
sullivan781 said:
@Shreps I just found a bug! When I lock my screen, it turns black instead of turn off. And another thing: I can't access download mode anymore, so I can't restore the stock rom for now using QFIL, only by TWRP Backup.
Click to expand...
Click to collapse
Should be fixed in the latest version. https://github.com/boulzordev/andro...mmit/258f330987c412c3076dc99c3075ff0e3ce8daef
I don't know about that download mode.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About:
The system design is more distinct, fascinating, and focused on content. Flyme 6 provides a fun browsing experience with delicate and agile animation. The new Intelligent Thinking Engine "One Mind" will automatically pick up user habits and provide solutions based on different scenarios, aiming to create a smart mobile phone with light and smooth user experience.
More About Flyme 6
Flashing Tutorial:
Backup Your Phone!!!!!
OEM Unlocked.
TWRP 3.0.x.x or above recommended.
Make sure your device has already been running on an Android 6.0.1 ROM.
Wipe Data/Cache.
Flash the zip file downloaded.
The first boot may take 15-20 minutes.
Download Links:
Download Link
GMS Installer For Flyme
Acknowledgments:
Flyme Open Source Project
XDA:DevDB Information
Flyme6, ROM for the Sony Xperia Z4
Contributors
M-Rom, flyme
ROM OS Version: 6.0.x Marshmallow
Based On: 6.0.1 32.2.A.5.11
Version Information
Status: Beta
Created 2017-08-08
Last Updated 2017-08-08
Good job bro
I downloaded from bbs.gfan.com last week and tested
So smooth and stable
Just problem, i can't Downgrade to 5.11
For this, im wiped data/system/cash/delvik
After that, flashed stock kernel and next time flashed this rom
Rom booted
---------- Post added at 12:39 PM ---------- Previous post was at 12:37 PM ----------
I wish, Lower battery consumption in next update
M-Rom said:


About:
The system design is more distinct, fascinating, and focused on content. Flyme 6 provides a fun browsing experience with delicate and agile animation. The new Intelligent Thinking Engine "One Mind" will automatically pick up user habits and provide solutions based on different scenarios, aiming to create a smart mobile phone with light and smooth user experience.
More About Flyme 6
Flashing Tutorial:
Backup Your Phone!!!!!
OEM Unlocked.
TWRP 3.0.x.x or above recommended.
Make sure your device has already been running on an Android 6.0.1 ROM.
Wipe Data/Cache.
Flash the zip file downloaded.
The first boot may take 15-20 minutes.
Download Links:
Download Link
XDA:DevDB Information
Flyme6, ROM for the Sony Xperia Z4
Contributors
M-Rom, flyme
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Beta
Created 2017-08-08
Last Updated 2017-08-08
Click to expand...
Click to collapse
Is there any Rom for e6553 for case to test
I have questions
This rom diffrent with flyme os on the bbs forum?
Can i flash custom kernels on this rom?
---------- Post added at 02:23 PM ---------- Previous post was at 02:17 PM ----------
Don't need to dual sim tapch?
UriahNazarian said:
I have questions
This rom diffrent with flyme os on the bbs forum?
Can i flash custom kernels on this rom?
---------- Post added at 02:23 PM ---------- Previous post was at 02:17 PM ----------
Don't need to dual sim tapch?
Click to expand...
Click to collapse
Same, deleted pirated software.
No, I'm sorry.
ramonet666 said:
Is there any Rom for e6553 for case to test
Click to expand...
Click to collapse
I'll upload the patch.
M-Rom said:
Same, deleted pirated software.
No, I'm sorry.
Click to expand...
Click to collapse
Ok
Don't matter
hi, everything working on this one? this is one of my favorite ROM since Nexus, hope there's a Nougat version would loved to try. Thanks for this
Locked bootloader
I have a locked bootloader? Can I install this rom or it is only for unlocked bootloaders?
Can I root it after installation? How will be the process to root it?
Thanks
Flashed over stock 5.11 rim. Got stucked on flyme logo.
installed on NOUGAT firmware dual sim, works like a charm...step that I took was-flash the firmware first using TWRP 3.1.1, reboot again to recovery first install will say fail, flash it again then it will go through installing supersu and boot image, then flash GAPPS 6.0.1 pico 64arm, reboot to recovery again, then last flash the PATCH for DUAL sim(if not flash, not data on lte). let it boot, it boots around 15 to 20 mins, it bootloops I think 3 times just let it set and it will boot.
---------- Post added at 12:55 AM ---------- Previous post was at 12:53 AM ----------
As the OP mentioned, unlocked bootloader is necessary, can't flash any custom ROM without unlocking bootloader, on ANY PHONES.......
imna357 said:
installed on NOUGAT firmware dual sim, works like a charm...step that I took was-flash the firmware first using TWRP 3.1.1, reboot again to recovery first install will say fail, flash it again then it will go through installing supersu and boot image, then flash GAPPS 6.0.1 pico 64arm, reboot to recovery again, then last flash the PATCH for DUAL sim(if not flash, not data on lte). let it boot, it boots around 15 to 20 mins, it bootloops I think 3 times just let it set and it will boot.
---------- Post added at 12:55 AM ---------- Previous post was at 12:53 AM ----------
As the OP mentioned, unlocked bootloader is necessary, can't flash any custom ROM without unlocking bootloader, on ANY PHONES.......
Click to expand...
Click to collapse
And for single SIM is there any option that let me test this ROM
ramonet666 said:
And for single SIM is there any option that let me test this ROM
Click to expand...
Click to collapse
I saw a patch in that MEGA-folder for Single Sim. Downloading myself
ramonet666 said:
And for single SIM is there any option that let me test this ROM
Click to expand...
Click to collapse
just try, make sure you got NANDROID BACKUP on your sdcard, just in case. I even installed the PARANOID ANDROID for single sim and it works Only thing my second sim is not being recognized, only the main SIM but it worked ok, not much tweaks because it was last years ROM
imna357 said:
just try, make sure you got NANDROID BACKUP on your sdcard, just in case. I even installed the PARANOID ANDROID for single sim and it works Only thing my second sim is not being recognized, only the main SIM but it worked ok, not much tweaks because it was last years ROM
Click to expand...
Click to collapse
Just tested yesterday everything works fine for e6553 the only problem was the chinees app
Just flash SUPERSU then install uninstaller or titanium backup at the APP store, remove chinese app, don't remove the theme and security
some screenshots?
for single sim?
i had lineage os, installed 311 twrp, reboot, installer flyme.... nothing.. error 7..... why this msg?
Alekim91 said:
i had lineage os, installed 311 twrp, reboot, installer flyme.... nothing.. error 7..... why this msg?
Click to expand...
Click to collapse
You should flashing 5.11 stock kernel
After that wipe system/data/cache/delvik
Flashing rom now
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am not responsible for anything that may happen to your phone as a result of installing custom roms and/or kernels. you do so at your own risk and take the responsibility upon yourself.
Part -A Configure Computer
1) Download and extract the Stock firmware, Setup tools & Drivers
2) Install ADB Drivers
3) Install Lenovo ZUK Z2 PLUS (2132) Drivers
4) Setup Tool all in one
5) Setup Mi Flash tool
Part -B Booting device in to EDL Mode
Note : Thank to @mauronofrio for his tool
1) Enable Android debugging (ADB) in developer options
2) Connect your device to PC
3) open Tool all in one
4) The tool detects your device and pop up a window on your z2 plus device
5) chick and click OK
6) Know go to Tool all in one > Advance Options
7) click Reboot EDL
8) Device will boot in to EDL Mode
Part -C Flashing stock Firmware
1) Open Mi Flash tool
2) Click on refresh to detect your Z2 plus as COM X ( Note : X represents device port numbers )
3) If you want to lock bootloader then select " clear all and lock " which was present on right bottom corner
4)Click on flash
Note : Never disconnect your device while MI tool was flashing
5) It take 300 sec to complete task after that hold power key for 15 sec to boot your device
Lenovo ZUK Z2 Plus ( 2132) Nougat
Indian firmware ( Note : all partitions fixed by me :good: )
Mi Flash tool ( Note : Recommended and Modified version by Me for deep partitions:fingers-crossed: )
Tool All In One ( Note : for Booting in to EDL, flashing TWRP , Unlock & lock bootloader )
adb-setup ( Note : Very important )
Other useful links ( If you want )
Drivers
PdaNet
Qualcomm_QHSUSB
ZUK_Z2132_drivers_V1.0.5
Tools
QPST
@ZUK ................................... for device
@zukfans.eu ..................... for source
@Francko76 .................... for source
@xiaomi .............................. for MI Flash tool
@mauronofrio ................. for Tool All In One
@Annabathina .................. for fixing deep partitions
@XDA ................... developers for helping me
@lenovo forum ........... developers
Lenovo ZUK Z2 Plus ................. Model 2132
XDA:DevDB Information
[Rom][7.0]Lenovo ZUK Z2 PLUS (2132) INDIAN firmware V2.5.104ST using MI Flash tool, ROM for the Lenovo ZUK Z2 (Plus)
Contributors
Annabathina
ROM OS Version: 7.x Nougat
Based On: Stock rom
Version Information
Status: Stable
Current Stable Version: 2.5.104ST
Stable Release Date: 2017-04-18
Created 2017-09-25
Last Updated 2017-09-25
Reserved
Reserved
RESERVED
Good to see you buddy.....loved your work in yu forums. Hope you will do same with thus device too.....looking forward
Sent from my Z2 Plus using Tapatalk
Anna in zuk z2 forum :silly::laugh:
Now this phone will rock
Dextron01 said:
Good to see you buddy.....loved your work in yu forums. Hope you will do same with thus device too.....looking forward
Click to expand...
Click to collapse
stop quoting op please...
Dextron01 said:
Good to see you buddy.....loved your work in yu forums. Hope you will do same with thus device too.....looking forward
Sent from my Z2 Plus using Tapatalk
Click to expand...
Click to collapse
Dont quote everything. Fvck!
El Psy Congroo
https://t.me/joinchat/ExDwekLF21qSDmOwudq3gg I suggest you to join here @Annabathina
Interesting! Will try it out.
Thanks a lot for sharing!
Update. Be careful when flashing! Selecting save user data still wipes the phone and locks the bootloader. I made a backup like a week ago so didn't lose important data.
Can I use QFIL to flash this?
El Psy Congroo
Magz Heaven said:
Can I use QFIL to flash this?
El Psy Congroo
Click to expand...
Click to collapse
of course you can but I did not tried on QFIL
it works excellent on Mi Flash tool including deep partitions , bootloader locking etc
daviduco said:
Is this stock indian? What modifications does it has?
Click to expand...
Click to collapse
Its just the Indian version without any chinese apps or bloatwares... Indian version lacks some features which are present in the Chinese version and has some bugs too
I have flash today the 7.0(as you given for downloading) firmware using mi flash tool the process was successful but after that I have tried to install AEX 4.6 but Volte was not working then I flashed the official 6.0 firmware using QFIL Volte we as enabled then I again tried to flash AEX but Volte was not working even I have turned on Volte in stock rom before flashing custom ROM
Any help?
kany1 said:
I have flash today the 7.0(as you given for downloading) firmware using mi flash tool the process was successful but after that I have tried to install AEX 4.6 but Volte was not working then I flashed the official 6.0 firmware using QFIL Volte we as enabled then I again tried to flash AEX but Volte was not working even I have turned on Volte in stock rom before flashing custom ROM
Any help?
Click to expand...
Click to collapse
wowo did you really flash a 7.x ROM on top of 6.x stock?
fallen.kn said:
wowo did you really flash a 7.x ROM on top of 6.x stock?
Click to expand...
Click to collapse
Before flashing with mi flash tool I was using AEX 4.6 and then i tried this flashing and when i was having problem with Volte then I flashed the original firmware (marshmallow) using QFIL)Volte was working then I flash AEX 4.6 but then also Volte was not working. I don't know why that strange behavior was there with Volte because I have flashed tons of rom before and I know all the procedure that how to flash a custom rom. So i think there was some problem with the package which is provided for flagging with mi tool because the flashing was done using EDL method. But my Volte is again working fine because someone provide the solution on AEX 4.6 discussion.
When I click on Reboot EDL , my device just reboots to system. How does the EDL mode looks like? Is it like fastboot mode? Why is my device booting into system again. I followed all the steps provided, am i missing somthing
Phone isn't booting into edl mode... Instead of that phone is rebooting.
I had the same problem
kany1 said:
Before flashing with mi flash tool I was using AEX 4.6 and then i tried this flashing and when i was having problem with Volte then I flashed the original firmware (marshmallow) using QFIL)Volte was working then I flash AEX 4.6 but then also Volte was not working. I don't know why that strange behavior was there with Volte because I have flashed tons of rom before and I know all the procedure that how to flash a custom rom. So i think there was some problem with the package which is provided for flagging with mi tool because the flashing was done using EDL method. But my Volte is again working fine because someone provide the solution on AEX 4.6 discussion.
Click to expand...
Click to collapse
What was the solution? I had the same problem.
I think developers are sleeping... Nobody is giving solution.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
[B][FONT="Tahoma"][COLOR="Black"]/*
* I Do not Become Responsible For The Bad Installation
* Now Your Warranty Is Mine, Before Flashing Investigate
* You Decide to Make All These Modifications to Your Device
* Under Your Own Risk, If You Spoil Your Device, I Will Laugh At You
*/[/COLOR][/FONT][/B]
KingOfMezi
Hello, today I present the official firmware of Huawei P10 Lite, completely flasheable for any recovery of Twrp to solve any problem you have,instability in the phone, bug, brick, etc,Or to return to stock from a custom ROM or by the simple echo of updating the latest updates of our Huawei P10 Lite.Latinoamerica And Europe Asia Pacific, ATT Mexico, Italy TIM, China, etc.
Click to expand...
Click to collapse
REQUIREMENTS:
-Bootloader Unlocked
-Activate USB Debugging
-Activate Unknown Applications
-Activate OEM Unlock
Huawei P10 Lite-Recovery Twrp EMUI 8.0.0
-Decompress File:
We turn Off The Phone And Enter The Fastboot Mode,We Open The Cmd Window And Write These Codes:
https://mega.nz/#!2VZGXawC!2-9yPFh3reghkGcfSl3nRIJhHGkP8fqDsgUG66ewjkk
Code:
[B][FONT="Tahoma"][COLOR="Black"] fastboot flash recovery_ramdisk RECOVERY-V2.img[/COLOR][/FONT][/B]
INSTALLATION:
We Copy The Firmware And Data_Full To The SD Card
We Turn Off The Phone,And Enter Recovery Twrp
Go Wipe
We mark
-Davilk /Art Cache,Cache,Data,Internal Storage,System
-Only Mark What I Mention
-And We Make The Wipes, Already Finished, We Back Everything.
-Flash The Firmware (Delay Around 4 to 5 Minutes)
-Flash Update_Data_Full (1 to 2 Minutes Delay)
-When Finish, We Give In Reboot System...
We turn Off The Phone And Enter The Fastboot Mode:
-Decompress File:
Kernel-Ramdisk.zip
We Open update.bat Press Enter
-Automatically Install Ramdisk+Recovery Stock And Kernel
-When Finish, We Give In Reboot System...
Reboot To Stock Recovery By Vol+ And Power Button
Do a Factory Reset And Reboot System We do Initial Configuration
Initial Start And Enjoy....
The THANKS button encourages me to keep working for free. You decide if it's worth pressingDownload:
Firmware For Versions Of Europe Free Versions (Dual Sim)
-Huawei P10 Lite-WAS-LX1 8.0.0.321(C432log) https://mega.nz/#!GRwk0R6b!PrhJ_UyWgvMzVinfDpSArCVHz0Bs8hSSywkECtWWklg
-Update_Data_Full_LX1(C432B321log) https://mega.nz/#!nEYhzbwR!KVQe7y8yi-vQzt4GZvSHi_JfXUi9ccZOeFz9kbpXsKA
-Kernel-Ramdisk(C432B321log) https://mega.nz/#!yGw1hQyL!NAHjs6KFC74TfFvSNtLhNK-4FBelmbFMO1IFXBSqyxI
Firmware For Versions Of Europe Free Versions (Dual Sim)
-Huawei P10 Lite-WAS-LX1 8.0.0.368(C432log) https://mega.nz/#!nWxkBYjA!kxLMbLSS9jxKiQ_QgiYD84sRMAfzi_Nf-hB-rbDfsw4
-Update_Data_Full_LX1(C432B368log) https://mega.nz/#!iKw2SYhZ!53bwt4xsnBBi3h3lD-MGj4C6Rj1OKXUKUP11WfruWrc
-Kernel-Ramdisk(C432B368log) https://mega.nz/#!XCo01I5K!31b5Za_oT5iSUy-KmTDAmagCftp-VBBqgla29-ADSfk
Telegram Group:
Here Will Support for All Hi6250 Devices:
Huawei Mate 10 Lite,Huawei P10 Lite,Honor 6X,Honor 7X,Honor 8 Lite
Honor 5C,Huawei P9 Lite 2017 And 2016 https://t.me/joinchat/HH00UkNvNQYbZDjlDcrhHw
XDA:DevDB Information
Huawei P10 Lite
Contributors
KingOfMezi
Chisetdel31260
Neondragon1909
-KangVIP Framework & Team HRT
-Team Win Recovery Project For P10 Lite
ROM OS Version: Android 8.0.0 Oreo
ROM Kernel: Linux 4.4.23+
ROM Firmware Required: EMUI 8.0.0
Version Information
Status: Stable
Current Stable Version: 2018-04-12
Stable Release Date: 2018-04-12
Created: 2018-04-14
Last Updated: 2018-04-14
ChangeLog:
New added recovery for Oreo emui 8.0.0 p10 lite version V2 (2018-04-17)
- https://mega.nz/#!2VZGXawC!2-9yPFh3reghkGcfSl3nRIJhHGkP8fqDsgUG66ewjkk
-Added sections for installation and backup everything works
-system, product, version, cust, vendor, boot, kernel
- The partition data are not backed up.
-Thanks to Team MT
__________________________________________________ _________________________
ChangeLog:
-Huawei P10 Lite WAS-LX1C432B321 (2018-04-12)
-This Serves To Return To a Custom Rom Or Generic Aosp,Lineage Os 15,Rom Stock EMUI 8.0.0
-This Is My First Version That I Make Flash Firmware For P10 Lite EMUI 8.0.0
-So Once You Know How Is Its Structure,Things Will Change,And It Will Be Easier
-To Flash Android 8.0.0,In Any Twrp,Without So Many Codes Via Fastboot.
-Kernel Disabled Some Codes To Be Able To Boot
-Ramdisk Disabled Some Codes to be able to Boot
-Added Support Init.d
-Added Oreo Recovery Stock For Any Model P10 Lite WAS-LXX
-Added Recovery Twrp For Oreo Beta P10 Lite https://mega.nz/#!uZxHiLbI!KH1_PLQWi1Q6FxCLTLu9_0fponYiFVZ3XwpsE2gMSMs
-Implemented The Update_Data_Full and The Update_Data_Public (Fully Complete Data Partition)
I guess file is still being uploaded.
So this will help us to recover stock ROM after installing treble roms and custom oreo roms right? I guess everything is oreo based, including partitions?
Anyway, thanks for the great job, good luck!
test
Hi, great god. P10 lite oreo 8.0, my device p9 lite VNS-DL00 replaced Oeminfo for P10Lite WAS-LX1AC432 and brushed into 7.0 firmware B182, phone bugs> sim card no service and no sound thinking through FF simulation agent ota update 8.0 download done but Verify illegal firmware. . So can't update perhaps it is verified by imei. Hope you can help.：笑：：d
LHFGS said:
Hi, great god. P10 lite oreo 8.0, my device p9 lite VNS-DL00 replaced Oeminfo for P10Lite WAS-LX1AC432 and brushed into 7.0 firmware B182, phone bugs> sim card no service and no sound thinking through FF simulation agent ota update 8.0 download done but Verify illegal firmware. . So can't update perhaps it is verified by imei. Hope you can help.：笑：：d
Click to expand...
Click to collapse
Hi, use HWOTA to update, check for thread in this forum.
test
Almost forgot that the phone did not have any sound
---------- Post added at 06:41 PM ---------- Previous post was at 06:35 PM ----------
Jaizu said:
Hi, use HWOTA to update, check for thread in this forum.
Click to expand...
Click to collapse
OK？Yeah, I will rest, or use HWOTA will succeed. Thanks.Please give a link.
---------- Post added at 06:42 PM ---------- Previous post was at 06:41 PM ----------
Jaizu said:
Hi, use HWOTA to update, check for thread in this forum.
Click to expand...
Click to collapse
OK？Yeah, I will rest, or use HWOTA will succeed. Thanks.Please give a link.
Thank you for the work you've done.
I have a problem...
TWRP working... i flash files but my phone is always on this screen...
Any solution? Bootloader working & unlocked.
hi6250 fro Twrp oero8.0
Just saw the landlord's firmware, I first test the landlord's good stuff oero custom hi6250. Do not change oem brush to try it. Thank you for the firmware provided by the landlord.
---------- Post added at 07:10 PM ---------- Previous post was at 06:59 PM ----------
VZ Power said:
Thank you for the work you've done.
I have a problem...
and my phone is always on this screen...
Any solution? Bootloader working & unlocked.
Click to expand...
Click to collapse
Xda Forum has such a post discussion, you can search, no power hold down the sound button to insert the USB data cable vibration press the power button must be quickly, try several different buttons, the key is still no electricity test. I hope your phone is okay. Good luck.
VZ Power said:
Thank you for the work you've done.
I have a problem...
and my phone is always on this screen...
Any solution? Bootloader working & unlocked.
Click to expand...
Click to collapse
You flashed this on emui 8 or on emui 5?
Alexxxx1 said:
You flashed this on emui 8 or on emui 5?
Click to expand...
Click to collapse
I have EMUI 8 but i flash a bad files and i have this error!
VZ Power said:
I have EMUI 8 but i flash a bad files and i have this error!
Click to expand...
Click to collapse
Use this Chinese recovery, let me know how it went
http://www.mediafire.com/file/icpfjhw9eysjlao/FIGO321.img
code:
fastboot flash recovery_ramdisk FIGO321.img
KingOfMezi said:
Use this Chinese recovery, let me know how it went
Click to expand...
Click to collapse
I flashed this recovery and i go follow steps...
We mark
-Davilk / Art Cache
-Cache
-Data
-Internal Storage
-System
-Only Mark What I Mention
-And We Make The Wipes, Already Finished, We Back Everything.
-Flashes The Firmware (Delay Around 4 to 5 Minutes)
-Flash Update_Data_Full (1 to 2 Minutes Delay)
-When Finish, We Give In Reboot System...
Click to expand...
Click to collapse
But i cant boot... Error recovery image, bla bla...
VZ Power said:
Thank you for the work you've done.
I have a problem...
TWRP working... i flash files but my phone is always on this screen...
Any solution? Bootloader working & unlocked.
Click to expand...
Click to collapse
flash other twrp. it worked for me
HYPER98889 said:
flash other twrp. it worked for me
Click to expand...
Click to collapse
I already use two recovery... TWRP (in this thread) and TWRP chinese... but i have the same result... ERROR... :/
VZ Power said:
I flashed this recovery and i go follow steps...
But i cant boot... Error recovery image, bla bla...
Click to expand...
Click to collapse
1: Decompress file https://mega.nz/#!fRZUgAyS!LbIs8ntFFgRVplgcs0pQo_1Ou1vncF5rKygVKec3um8
2:reboot to fastboot again:
3:and flash stock recovery:
Code:
Code:
fastboot flash recovery_ramdisk recovery_ramdisk.img
4: Reboot to stock recovery by vol+ and power button.
5:.Do a factory reset and Reboot system.
6:enjoy
KingOfMezi said:
1: Decompress file https://mega.nz/#!fRZUgAyS!LbIs8ntFFgRVplgcs0pQo_1Ou1vncF5rKygVKec3um8
2:reboot to fastboot again:
3:and flash stock recovery:
Code:
Code:
fastboot flash recovery_ramdisk recovery_ramdisk.img
4: Reboot to stock recovery by vol+ and power button.
5:.Do a factory reset and Reboot system.
6:enjoy
Click to expand...
Click to collapse
Working!!! I love you men!!!
VZ Power said:
I have EMUI 8 but i flash a bad files and i have this error!
Click to expand...
Click to collapse
Factory reset in stock recovery it will solve that thing. or factory reset in oreo twrp maybe working.
VZ Power said:
Working!!! I love you men!!!
Click to expand...
Click to collapse
:good: :good: :good:
Any method for root?
VZ Power said:
Any method for root?
Click to expand...
Click to collapse
magisk Root