{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am not responsible for anything that may happen to your phone as a result of installing custom roms and/or kernels. you do so at your own risk and take the responsibility upon yourself.
Part -A Configure Computer
1) Download and extract the Stock firmware, Setup tools & Drivers
2) Install ADB Drivers
3) Install Lenovo ZUK Z2 PLUS (2132) Drivers
4) Setup Tool all in one
5) Setup Mi Flash tool
Part -B Booting device in to EDL Mode
Note : Thank to @mauronofrio for his tool
1) Enable Android debugging (ADB) in developer options
2) Connect your device to PC
3) open Tool all in one
4) The tool detects your device and pop up a window on your z2 plus device
5) chick and click OK
6) Know go to Tool all in one > Advance Options
7) click Reboot EDL
8) Device will boot in to EDL Mode
Part -C Flashing stock Firmware
1) Open Mi Flash tool
2) Click on refresh to detect your Z2 plus as COM X ( Note : X represents device port numbers )
3) If you want to lock bootloader then select " clear all and lock " which was present on right bottom corner
4)Click on flash
Note : Never disconnect your device while MI tool was flashing
5) It take 300 sec to complete task after that hold power key for 15 sec to boot your device
Lenovo ZUK Z2 Plus ( 2132) Nougat
Indian firmware ( Note : all partitions fixed by me :good: )
Mi Flash tool ( Note : Recommended and Modified version by Me for deep partitions:fingers-crossed: )
Tool All In One ( Note : for Booting in to EDL, flashing TWRP , Unlock & lock bootloader )
adb-setup ( Note : Very important )
Other useful links ( If you want )
Drivers
PdaNet
Qualcomm_QHSUSB
ZUK_Z2132_drivers_V1.0.5
Tools
QPST
@ZUK ................................... for device
@zukfans.eu ..................... for source
@Francko76 .................... for source
@xiaomi .............................. for MI Flash tool
@mauronofrio ................. for Tool All In One
@Annabathina .................. for fixing deep partitions
@XDA ................... developers for helping me
@lenovo forum ........... developers
Lenovo ZUK Z2 Plus ................. Model 2132
XDA:DevDB Information
[Rom][7.0]Lenovo ZUK Z2 PLUS (2132) INDIAN firmware V2.5.104ST using MI Flash tool, ROM for the Lenovo ZUK Z2 (Plus)
Contributors
Annabathina
ROM OS Version: 7.x Nougat
Based On: Stock rom
Version Information
Status: Stable
Current Stable Version: 2.5.104ST
Stable Release Date: 2017-04-18
Created 2017-09-25
Last Updated 2017-09-25
Reserved
Reserved
RESERVED
Good to see you buddy.....loved your work in yu forums. Hope you will do same with thus device too.....looking forward
Sent from my Z2 Plus using Tapatalk
Anna in zuk z2 forum :silly::laugh:
Now this phone will rock
Dextron01 said:
Good to see you buddy.....loved your work in yu forums. Hope you will do same with thus device too.....looking forward
Click to expand...
Click to collapse
stop quoting op please...
Dextron01 said:
Good to see you buddy.....loved your work in yu forums. Hope you will do same with thus device too.....looking forward
Sent from my Z2 Plus using Tapatalk
Click to expand...
Click to collapse
Dont quote everything. Fvck!
El Psy Congroo
https://t.me/joinchat/ExDwekLF21qSDmOwudq3gg I suggest you to join here @Annabathina
Interesting! Will try it out.
Thanks a lot for sharing!
Update. Be careful when flashing! Selecting save user data still wipes the phone and locks the bootloader. I made a backup like a week ago so didn't lose important data.
Can I use QFIL to flash this?
El Psy Congroo
Magz Heaven said:
Can I use QFIL to flash this?
El Psy Congroo
Click to expand...
Click to collapse
of course you can but I did not tried on QFIL
it works excellent on Mi Flash tool including deep partitions , bootloader locking etc
daviduco said:
Is this stock indian? What modifications does it has?
Click to expand...
Click to collapse
Its just the Indian version without any chinese apps or bloatwares... Indian version lacks some features which are present in the Chinese version and has some bugs too
I have flash today the 7.0(as you given for downloading) firmware using mi flash tool the process was successful but after that I have tried to install AEX 4.6 but Volte was not working then I flashed the official 6.0 firmware using QFIL Volte we as enabled then I again tried to flash AEX but Volte was not working even I have turned on Volte in stock rom before flashing custom ROM
Any help?
kany1 said:
I have flash today the 7.0(as you given for downloading) firmware using mi flash tool the process was successful but after that I have tried to install AEX 4.6 but Volte was not working then I flashed the official 6.0 firmware using QFIL Volte we as enabled then I again tried to flash AEX but Volte was not working even I have turned on Volte in stock rom before flashing custom ROM
Any help?
Click to expand...
Click to collapse
wowo did you really flash a 7.x ROM on top of 6.x stock?
fallen.kn said:
wowo did you really flash a 7.x ROM on top of 6.x stock?
Click to expand...
Click to collapse
Before flashing with mi flash tool I was using AEX 4.6 and then i tried this flashing and when i was having problem with Volte then I flashed the original firmware (marshmallow) using QFIL)Volte was working then I flash AEX 4.6 but then also Volte was not working. I don't know why that strange behavior was there with Volte because I have flashed tons of rom before and I know all the procedure that how to flash a custom rom. So i think there was some problem with the package which is provided for flagging with mi tool because the flashing was done using EDL method. But my Volte is again working fine because someone provide the solution on AEX 4.6 discussion.
When I click on Reboot EDL , my device just reboots to system. How does the EDL mode looks like? Is it like fastboot mode? Why is my device booting into system again. I followed all the steps provided, am i missing somthing
Phone isn't booting into edl mode... Instead of that phone is rebooting.
I had the same problem
kany1 said:
Before flashing with mi flash tool I was using AEX 4.6 and then i tried this flashing and when i was having problem with Volte then I flashed the original firmware (marshmallow) using QFIL)Volte was working then I flash AEX 4.6 but then also Volte was not working. I don't know why that strange behavior was there with Volte because I have flashed tons of rom before and I know all the procedure that how to flash a custom rom. So i think there was some problem with the package which is provided for flagging with mi tool because the flashing was done using EDL method. But my Volte is again working fine because someone provide the solution on AEX 4.6 discussion.
Click to expand...
Click to collapse
What was the solution? I had the same problem.
I think developers are sleeping... Nobody is giving solution.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi, finally we have a SlimROM for our ZUK Z2 :fingers-crossed:
@Fedor917 and others have decided to work assiduously on this fantastic zuk z2. From this great collaboration were born so many ROMs, this thread will talk about the SlimROM.
Installation Instructions:
Your bootlaoder must be unlocked ( Unlock guide Tool )
You must have a custom recovery installed ( TWRP Tool )
Download the lastest SlimROM
Download the GAPPS ( ARM64/6.0/Pico )
Put SlimROM and GAPPS on your phone
Reboot in TWRP
Wipe Data, Cache and Dalvik Cache
Flash SlimROM and GAPPS
Reboot
Download:
SlimROM by fedor917
GAPPS
Kown Issues:
Nothing :victory:
XDA:DevDB Information
[6.0.1][Z2] Unofficial SlimRom by fedor917, ROM for the Lenovo Zuk Z2
Contributors
mauronofrio, fedor917, davidevinavil
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Version Information
Status: Nightly
Created 2016-11-21
Last Updated 2016-11-22
Hello @mauronofrio
But... Your ROMs (CM 14.1, PAC-MAN, Bliss, RR and this- SlimROM) are compatible with version Z2 or Z2_plus?
Because in the Thread write "Z2" while in the folder AndroidFileHost present only the ROM for "Z2 Plus"
I'm confused... Thanks!
z2 and z2 plus are the same phone
@Fedor917 @mauronofrio, can we re-enable long tap please? it's more useful than long press of the fingerprint/home button
separately, does slim rom support substratum/layers or use CMTE? would be great to have a z2 rom that supports substratum, since CMTE app themer engine is still quite buggy ...
pickandrew said:
Hello @mauronofrio
But... Your ROMs (CM 14.1, PAC-MAN, Bliss, RR and this- SlimROM) are compatible with version Z2 or Z2_plus?
Because in the Thread write "Z2" while in the folder AndroidFileHost present only the ROM for "Z2 Plus"
I'm confused... Thanks!
Click to expand...
Click to collapse
pickandrew said:
Hello @mauronofrio
But... Your ROMs (CM 14.1, PAC-MAN, Bliss, RR and this- SlimROM) are compatible with version Z2 or Z2_plus?
Because in the Thread write "Z2" while in the folder AndroidFileHost present only the ROM for "Z2 Plus"
I'm confused... Thanks!
Click to expand...
Click to collapse
Z2 and Z2plus are the same phone
just flash it.. great ROM..
nice performance and battery life.. no bugs so far..
can i flash latest xposed to this ROM?
really miss the ZUI Quick Setting from bottom sliding panel..
is there a way to replicate that?
thanks.
Hi, When I gonna Download it, I read It Z2 Plus, is for Z2 or for Z2 Plus? Thanks for answer.
serninator said:
Hi, When I gonna Download it, I read It Z2 Plus, is for Z2 or for Z2 Plus? Thanks for answer.
Click to expand...
Click to collapse
Zuk z2 and zuk z2 plus is the same phone
hi, My friend use this ROM found the problem:
opened and closed to mobile data after three mobile data can't open it, must phone restart to open the mobile data.
I want to move this rom to chinese zuk z2 bbs，in china ，not every one can see this page，because of gfw ，Can I get your permission?
VOLTE Support ?
I am unable to enable volte support ! Would be great to have your help , if supported on the Rom
Jiahao Lin said:
hi, My friend use this ROM found the problem:
opened and closed to mobile data after three mobile data can't open it, must phone restart to open the mobile data.
Click to expand...
Click to collapse
The following commit tries to fix this problem:
https://github.com/SlimRoms/device_oneplus_oneplus3/commit/5d692e32436fa0617c32318238fbfa8e926ae7a1
After ROM compile, data still doesn't come back after wifi disconnect but comes on after turning airplane mode on & off. Only benefit is that you don't have to restart your device to get data on. But problem is not 100% fixed.
Note: any Dev with a complete fix for this, let me know. this is my daily driver.
UPDATED SLIM6 ROM
ROM OS Version: android_r81_6.0.x Marshmallow - 2017 October security patches
ROM Kernel: Linux 3.18.31 - 2017 October security patches (+Other tweaks)
ROM Name: Slim-z2-6.0.1.build.2.1-UNOFFICIAL-20171029-2124.zip
Additional features:
Sony ClearAudio+ sound enhancement tested using Spotify.
Other Audio playback fixes by @GeniusisHere
Google Services pe-installed - custom minimal
Google Live Wallpapers from pixel 2
Minimal SystemUI theme tweaks
Close to stock Google yet Slim!
Any issues?
Sometimes data doesn't comeback after wifi disconnection, enable & disconnect airplane mode to use data.
Otherwise, everything works. STABLE
Download ROM: LINK REMOVE DUE TO WI-FI NOT WORKING
NOTE: im not responsible for any dead phones & if anyone requires odexed version let me know.
also after flashing ROM, give the device some time or expect some heat. Not sure if i need a separate thread for this.
Johniscool said:
UPDATED SLIM6 ROM
ROM OS Version: android_r81_6.0.x Marshmallow - 2017 October security patches
ROM Kernel: Linux 3.18.31 - 2017 October security patches (+Other tweaks)
ROM Name: Slim-z2-6.0.1.build.2.1-UNOFFICIAL-20171029-2124.zip
Additional features:
Sony ClearAudio+ sound enhancement tested using Spotify.
Other Audio playback fixes by @GeniusisHere
Google Services pe-installed - custom minimal
Google Live Wallpapers from pixel 2
Minimal SystemUI theme tweaks
Close to stock Google yet Slim!
Any issues?
Sometimes data doesn't comeback after wifi disconnection, enable & disconnect airplane mode to use data.
Otherwise, everything works. STABLE
Download ROM: LINK
NOTE: im not responsible for any dead phones & if anyone requires odexed version let me know.
also after flashing ROM, give the device some time or expect some heat. Not sure if i need a separate thread for this.
Click to expand...
Click to collapse
thanks, any tips on how to flash from nougat? I would be curious to try marshmallow!
nicky69100 said:
thanks, any tips on how to flash from nougat? I would be curious to try marshmallow!
Click to expand...
Click to collapse
hm never used anything above marshmallow for this device. Just assumed anything above MM will be unstable. Just use latest twrp - wipe system/cache/data. clean flash, all should work I guess.
I've just tried it and data is not working whether connection type I am using, but I had to go back on Cr droid:/
nicky69100 said:
I've just tried it and data is not working whether connection type I am using, but I had to go back on Cr droid:/
Click to expand...
Click to collapse
did u downgrade to marshmellow first?
oh btw read update messages listed issues
fallen.kn said:
did u downgrade to marshmellow first?
oh btw read update messages listed issues
Click to expand...
Click to collapse
I've tried the air plane workaround but it didn't work out.
No I didn't downgrade but it is a good suggestion, so I should flash a twrp zui version
first the flash slim rom? knid of a pain in the ass if I don't keep the rom as a daily driver.
Any more detailed feedback on this rom?
nicky69100 said:
I've tried the air plane workaround but it didn't work out.
No I didn't downgrade but it is a good suggestion, so I should flash a twrp zui version
first the flash slim rom? knid of a pain in the ass if I don't keep the rom as a daily driver.
Any more detailed feedback on this rom?
Click to expand...
Click to collapse
Its also recommend to upgrade to stock nougat first instead of flashing a nougat rom directly due to firmeware related things like baseband etc. so..
nicky69100 said:
I've tried the air plane workaround but it didn't work out.
No I didn't downgrade but it is a good suggestion, so I should flash a twrp zui version
first the flash slim rom? knid of a pain in the ass if I don't keep the rom as a daily driver.
Any more detailed feedback on this rom?
Click to expand...
Click to collapse
Have you managed to flash the rom with data working? Only issue I had in the past was Wi-Fi not working, fixed long ago. I'm guessing this issue has something to do with flashing rom from a Nougat base/rom (different drivers etc). In past devices i had to flash modem/bootloader for MM to get stuff working with MM Custom Roms. Not sure about about this device, never upgraded beyond MM.
If anyone tested this update & everything works let me know. If there's still issues, I'll remove the links.
Testing right now
Everything seems to be fine, flash with darkmoon kelner 4.1
Except Wifi/data but after turning on airplane mode and turning of, data works
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am not responsible for anything that may happen to your phone as a result of installing custom roms and/or kernels. you do so at your own risk and take the responsibility upon yourself.
Part -A Configure Computer
1) Download and extract the Stock firmware, Setup tools & Drivers
2) Install ADB Drivers
3) Install Lenovo ZUK Z2 PLUS (2132) Drivers
4) Setup Tool all in one
5) Setup Mi Flash tool
Part -B Booting device in to EDL Mode
Note : Thank to @mauronofrio for his tool
1) Enable Android debugging (ADB) in developer options
2) Connect your device to PC
3) open Tool all in one
4) The tool detects your device and pop up a window on your z2 plus device
5) chick and click OK
6) Know go to Tool all in one > Advance Options
7) click Reboot EDL
8) Device will boot in to EDL Mode
Part -C Flashing stock Firmware
1) Open Mi Flash tool
2) Click on refresh to detect your Z2 plus as COM X ( Note : X represents device port numbers )
3) If you want to lock bootloader then select " clear all and lock " which was present on right bottom corner
4)Click on flash
Note : Never disconnect your device while MI tool was flashing
5) It take 300 sec to complete task after that hold power key for 15 sec to boot your device
Lenovo ZUK Z2 Plus ( 2132) Marshmallow
Indian firmware ( Note : all partitions fixed by me :good: )
Mi Flash tool ( Note : Recommended and Modified version by Me for deep partitions:fingers-crossed: )
Tool All In One ( Note : for Booting in to EDL, flashing TWRP , Unlock & lock bootloader )
adb-setup ( Note : Very important )
Other useful links ( If you want )
Drivers
PdaNet
Qualcomm_QHSUSB
ZUK_Z2132_drivers_V1.0.5
Tools
QPST
@ZUK ................................... for device
@zukfans.eu ..................... for source
@Francko76 .................... for source
@xiaomi .............................. for MI Flash tool
@mauronofrio ................. for Tool All In One
@Annabathina .................. for fixing deep partitions
@XDA ................... developers for helping me
@lenovo forum ........... developers
Lenovo ZUK Z2 Plus ................. Model 2132
XDA:DevDB Information
[Rom][6.0.1]Lenovo ZUK Z2 PLUS (2132) INDIAN firmware V2.0.093ST using MI Flash tool, ROM for the Lenovo ZUK Z2 (Plus)
Contributors
Annabathina
ROM OS Version: 6.0.x Marshmallow
Based On: Stock rom
Version Information
Status: Stable
Current Stable Version: 2.0.093
Stable Release Date: 2016-08-11
Created 2017-09-25
Last Updated 2017-09-25
Reserved
Reserved
redserved
Which is better
Which stock rom 7.0 or 6.0 ...is best for battery...
Vimi12 said:
Which stock rom 7.0 or 6.0 ...is best for battery...
Click to expand...
Click to collapse
6.0.. less bugs too
If i flash this rom will my warranty be restored? Currently i am on aicp
harshmehta29 said:
If i flash this rom will my warranty be restored? Currently i am on aicp
Click to expand...
Click to collapse
Yes your device will be like when you purchased.
Help me
Does my phone get ota updates after flashing the rom??????
have you tried ...?
have you flashed this rom. and are able to get ota ?
---------- Post added at 12:28 PM ---------- Previous post was at 12:25 PM ----------
adil786ali63 said:
6.0.. less bugs too[/you got ota 7.0 after falshing this rom ??
Click to expand...
Click to collapse
cant get ota update
hi, i flashed as mention above but now the problem is that i cant get ota update to zui 2.0.133 and android 7.0
phone is bootloader unlocked and rooted, is there any other steps i need to do before flashing back to the original firmware ? or just go ahead and follow instruction on the OP ?
omki511 said:
hi, i flashed as mention above but now the problem is that i cant get ota update to zui 2.0.133 and android 7.0
Click to expand...
Click to collapse
same problem here, I am going to flash using qfil and will update here.
Lenovo z2 plus flashing
Please don't use Mi flash tool, it was not properly flashing.Use qfil for proper flashing.
---------- Post added at 09:30 AM ---------- Previous post was at 09:27 AM ----------
arun356y said:
same problem here, I am going to flash using qfil and will update here.
Click to expand...
Click to collapse
Flash stock room again with qfil and after that you will definitely get ota updates.
[email protected] said:
Please don't use Mi flash tool, it was not properly flashing.Use qfil for proper flashing.
---------- Post added at 09:30 AM ---------- Previous post was at 09:27 AM ----------
Flash stock room again with qfil and after that you will definitely get ota updates.
Click to expand...
Click to collapse
yeah I flashed 2.5 104 ST and now its working fine
I flash rom using QFIL but it still shows me "system has been root" in System Update app
I flash rom with "unlock" the bootloader as well as "relock" bootloader... but i can't able to update.
It's not working....
meetgajjar31 said:
I flash rom using QFIL but it still shows me "system has been root" in System Update app
I flash rom with "unlock" the bootloader as well as "relock" bootloader... but i can't able to update.
It's not working....
Click to expand...
Click to collapse
Can you help me in flashing through qfil??
---------- Post added at 12:45 PM ---------- Previous post was at 12:44 PM ----------
How to flash through qfil ??
Will i be able to get system update after flashing this if the bootloader is locked?
anyone using the zui 2.0 marshmallow build? What's the SOT.. I'm currently on Chinese zui 3.1, hoping to get back to Indian zui 2.0 because of double notification but the battery life of Chinese zui 3.1 is good as i easily get 7hr 30 to 8hr even with moderate to heavy usage
SteelBodyX said:
anyone using the zui 2.0 marshmallow build? What's the SOT.. I'm currently on Chinese zui 3.1, hoping to get back to Indian zui 2.0 because of double notification but the battery life of Chinese zui 3.1 is good as i easily get 7hr 30 to 8hr even with moderate to heavy usage
Click to expand...
Click to collapse
How do you get that much of SOT i barely got 5.30 hrs max sot
Galaxy Tab S4 Port for Mi Pad 4/Plus!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features:
Stock latest Galaxy Tab S4 Firmware
Stock kernel for best stability
Debloated
Deknoxed
Automated Flasher
Samsung Tablet DeX works!
Daily Board works!
Galaxy Apps work!
All Samsung features!
And more!
What works:
Almost everything, check bugs!
What doesn't work / Bugs:
RIL (For now we're using Galaxy Tab S4 WiFi as base for better stability)
Settings have extra options (CSC stuff)
Brightness only works up to 30-40% so use my widget to use all brightness levels!
Use Automate app from Play Store and import this flow as a widget and put it on Your homescreen!
Brightness Widget
Note: SetupWizard might give You a soft reboot. Just wait 5 seconds and continue with SetupWizard. After that everything will be stable.
How to Install:
Make sure You're on MIUI 10 Oreo China Dev
Note: Backup Your nudes before flashing the rom! It will wipe Your internal storage.
Windows Users:
Extract the zip somewhere.
Reboot to fastboot and plug Your phone in.
Double tap on flasher_windows.bat (Don't run it as admin)
Wait till it finishes flashing.
Boot TWRP
Mount Vendor
Flash GalaxyTabS4VendorPatcher.zip
Now Flash DMVerity Disabler.
Done! Enjoy Your rom!
Linux Users:
Extract the zip somewhere.
Reboot to fastboot and plug Your phone in.
Open terminal in folder with rom files.
Use:
chmod 777 flasher_linux.sh
./flasher_linux.sh
Wait till it finishes flashing.
Boot TWRP
Mount Vendor
Flash GalaxyTabS4VendorPatcher.zip
Now Flash DMVerity Disabler.
Done!
Check screenshots in attached images!
Download:
Galaxy Tab S4 Port for Mi Pad 4/Plus
Warning! DO NOT flash Samsung OTA's! They may brick Your device! If You end up flashing one anyway, just use EDL mode or fastboot to go back to stock firmware.
Note: I'm pretty busy with OP6 roms so I'll update this one whenever I have time
If You have any other problems, just ask here on XDA or for the fastest support PM me or ask someone in my group on Telegram
Join my group!
If You want to motivate me to work more, buy me a coffee!
https://www.paypal.me/protodevnano
Credits:
HUGE AND MASSIVE THANKS to Guzram! Without him this ROM wouldn't exist. ..::Donate::..
erfanoabdi for vendor patcher idea.
dyneteve for knox spam fix!
fxsheep for his sgsi guide and vendor patcher stuff.
Make sure to tap thanks on all fxsheep and dyneteve posts! I couldn't find donation links!
Xiaomi for creating Mi Pad 4 Plus! It's a great tablet! I love it! :laugh:
My friend Dylan for always supporting me
If I forgot anyone, just PM me on Telegram!
XDA:DevDB Information
[ROM][PORT][8.1.0] Galaxy Tab S4 Port for Mi Pad 4/Plus, ROM for the Xiaomi Mi Pad 4
Contributors
ProtoDeVNan0
Source Code: https://github.com/MiCode/Xiaomi_Kernel_OpenSource/tree/clover-o-oss
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
ROM Firmware Required: MIUI 10 Oreo
Based On: SEx 9.5
Version Information
Status: Stable
Created 2019-01-20
Last Updated 2019-01-20
Downloading.......
pad 4 plus . bluetooth sound not working ...Thank you
I flash the EU stable rom. and flash This rom and reboot my Mi PAD 4.. boot is succes. now i setup my device.. My device is offed.. and back to bootanimation. and i try setup again. and my device is offed. back to bootanimation too..
ok. Boot now boot Is succes. but Wifi Is not work. Sound. and features is very good at working. threads ScreenShots wifi is working very well. but install this rom. is not work
Sorry guys. I forgot to mention that You need latest China Dev firmware. I've been using it with China Dev for entire day and it runs really well. So try to flash China Dev first. Also I was extremely tired while writing the guide so check it out again. Forgot about one step. Sorry! (24 hours without sleep). You have to flash dm verity disabler (it should have fbe disabler built it) after flashing vendor patch. And then everything will be perfect
Thank you!
ProtoDeVNan0 said:
Sorry guys. I forgot to mention that You need latest China Dev firmware. I've been using it with China Dev for entire day and it runs really well. So try to flash China Dev first. Also I was extremely tired while writing the guide so check it out again. Forgot about one step. Sorry! (24 hours without sleep). You have to flash dm verity disabler (it should have fbe disabler built it) after flashing vendor patch. And then everything will be perfect
Click to expand...
Click to collapse
I secced boot and using now. wifi ,galaxy apps,and etc are working
During setting, my device sometimes reboot, bur now that issue is disappeared.
I find bug, if i use earphone or bluetooth earphone the sound still can be heared through speaker.
except that i don't find other bugs.
Everything is now working perfect. but one issue in this rom. if i use earphone with this rom. rom is not Recognition the earphone. So sound is not on the earphone. bluetooth earphone is not wroking too. its need fix.
Using this on regular WiFi Mi Pad 4 (not plus) and everything works flawlessly but not face recognition, I think that might have something to do with the Tab S4 having an iris scanner.
SwipeIT said:
Everything is now working perfect. but one issue in this rom. if i use earphone with this rom. rom is not Recognition the earphone. So sound is not on the earphone. bluetooth earphone is not wroking too. its need fix.
Click to expand...
Click to collapse
And You support Lte For this rom next update? Many LTE users Want Use this rom.
If anyone wants the camera you can use this module to get Mi A2 camera:
https://www.google.com/amp/s/forum....odule-xiaomi-mi-a1-stock-camera-t3810432/amp/
I was on MIUI 10 China dev but now I'm on Lineage OS 16.0. Should I flash back to MIUI 10 before I flash your ROM? Thanks.
wednesyao said:
I was on MIUI 10 China dev but now I'm on Lineage OS 16.0. Should I flash back to MIUI 10 before I flash your ROM? Thanks.
Click to expand...
Click to collapse
You should fastboot flash China dev 9.1.17 before installing this rom.
Has anyone tried out if Linux on DeX is working on this rom?
On the normal Mi Pad 4 (non plus) the icons look weird on dex, any chance you could fix it?
ibooth2004 said:
On the normal Mi Pad 4 (non plus) the icons look weird on dex, any chance you could fix it?
Click to expand...
Click to collapse
Turn on Dex, go Settings > Developer option > Minimum width > 838
ibooth2004 said:
On the normal Mi Pad 4 (non plus) the icons look weird on dex, any chance you could fix it?
Click to expand...
Click to collapse
how to turn on dex experience?
piway said:
how to turn on dex experience?
Click to expand...
Click to collapse
Enable it in quick settings.
Wow you did such amazing work. And please port for mi pad 4 lte too. I fall in love with your rom
Thank Guy because this rom I wanna buy the tablet, I like the deX / Desktop mode on smaller device :good:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello XDA User
Below you can download the most heavily customized and tweaked version of MIUI 10, the Masik custom Android ROM for Whyred. This build is based on Android 9.0 Pie.
The best part, you can still enjoy all the awesomeness of MIUI 10. Masik has nearly all the design and user interface of the official MIUI 10 ROM. However, this custom one has many perks you can enjoy.
Moreover, the stock MIUI camera app can now use full manual control. Its users can also make use of its intelligent mode and noise elimination mode.
and more....
Code:
Code:
# Flash it at your own Risk!
# Your warranty is now VOID!
# We are not responsible for any damage to your equipment, loss of warranty or any kind
of damage caused by incorrect work of the rom(like your alarm clock not working)!
For heavy kernel users warning: The "tap2wake" feature is still experimental! By using it you agree with the fact that this can cause Touchscreen freezes or other unpredictable effects. Continue at your own risk.
instalation
Make sure your device bootloader is unlocked
install latest TWRP for Mi 8 Equlues with ADB Fastboot
make a factory reset
install the Rom Zip with TWRP
install Magisk v19.2
Reboot and enjoy.
Download SectionMega
TWRP Recovery
by Miuiitalya
XDAevDB Information
MasikX Miui 10 ROM, ROM is only for Mi8 pro Equlues
Contributors
#Masik Team, #OST
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Latest Firmware
Based On: Latest MIUI 10.3.2.2 MDB Masik X
Version Information
Status: Stable
Created
Last Updated 2019-05-11
For me
and this one
not in spanish....
Good to see some stock rom development for the mi 8 pro! My handset is currently on 10.3.3 Global, do I just need to do a factory reset in TWRP for this to work fully or do I need to flash back to the stock 10.3.2.2 first?
ste2610 said:
Good to see some stock rom development for the mi 8 pro! My handset is currently on 10.3.3 Global, do I just need to do a factory reset in TWRP for this to work fully or do I need to flash back to the stock 10.3.2.2 first?
Click to expand...
Click to collapse
no need to flash back
just make a backup and do a full wipe then flash the rom.
this rom have more features than global rom
im using it as daily drive, bo bug no crash... any!
Hey, thanks for the rom! Question: I have a Mi 8 Explorer Edition, which as far as I know is exactly the same as the Pro. Do you think this ROM will work on this device if I change the device name so it 'looks like' the Pro?
Teio said:
Hey, thanks for the rom! Question: I have a Mi 8 Explorer Edition, which as far as I know is exactly the same as the Pro. Do you think this ROM will work on this device if I change the device name so it 'looks like' the Pro?
Click to expand...
Click to collapse
as far as i know your ((3d face id)) gone!
just can use the fingerprint scanner.
if you have no problem. you can flash it.
im not test it, but saw somewhere that flash mi8 pro build on Mi 8 explorer!
flash and report it to me bro :highfive:
Is it new ROM?
Download link from MEGA is the same as on official site Masik, but there is Masik X 4.1 by 21.04.19
What's the antutu score with this rom?
Thanks
EnterTHEvoiD said:
What's the antutu score with this rom?
Thanks
Click to expand...
Click to collapse
310,000
eerastov said:
Is it new ROM?
Download link from MEGA is the same as on official site Masik, but there is Masik X 4.1 by 21.04.19
Click to expand...
Click to collapse
no bro, it's same, just a thread for conversation! :highfive:
shimsho said:
310,000
Click to expand...
Click to collapse
Impressive stuff. :good:
Thanks
I will try it in a minute
Hi, I get to the mi logo and I'm in a loop, is it something to do with the latest firmware having the vendor prebuilded and if so how do I get around this? I know the havok os rom for the mi 8 provides a force encryption zip for roms after 07/06/19 otherwise they will get a mi logo loop. Any help would be greatly appreciated!
Nevermind, just had to wipe data to remove encryption!
confused.
need tutorial full with picture. because its my first. please.
zidankirana said:
need tutorial full with picture. because its my first. please.
Click to expand...
Click to collapse
Oops!
Is there anyone willing to donate me such device so that I can bringup Lineage OS and make it official?
After I flash this room.. I'm having issue with Google play.. it won't let me install with WiFi... Unless I have to use data charges... How to fix this.. I already turn the app download preference to using any network...
Does this rom can use lte b3+b7
I bricked my POCO F3 Global while converting it into Redmi K40 after BL unlocking - I have tried everything - did whatever it takes to bring it back to life - but for me, nothing works.
I need experts advice, I would really appreciate if you could do something to fix this phone. (After trying whatever it takes, I came to a conclusion, while flashing it via Mi-Flash-Tool it says that it requires an Xiaomi Authorized Account to flash it to life, and it is hard to have one, probably)
Any help would be appreciated.
Thank you for your time.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AndroidsKings said:
I have bricked my POCO F3 Global while converting it into Redmi K40 after BL unlocking - I have tried everything - did whatever it takes to bring it back to life - but for me, nothing works.
I need experts advice, I would really appreciate if you could do something to fix this phone. ( but I have noticed a thing when flashing it via Mi-Flash Tool it requires a authorized account to flash it to life, and it is hard to have one, because of scammers out there.
View attachment 5305857
Click to expand...
Click to collapse
What exact steps did resulted into this? Is bootloader not accessible? I also have global version of POCO F3 and I also did the same to convert to Chinese version from global version, but flash tools gave me multiple errors. And didn't let me Flash the ROM.
But soon when I rebooted the phone it got stuck in Fastboot screen. Later on I flashed TWRP Recovery and Flashed CrDroid which booted up the phone, But due to some bugs and personal preferences I switched to Xiaomi.eu 12.5 stable.
What rom did you had before bricking your device?
malick186 said:
What exact steps did resulted into this? Is bootloader not accessible? I also have global version of POCO F3 and I also did the same to convert to Chinese version from global version, but flash tools gave me multiple errors. And didn't let me Flash the ROM.
But soon when I rebooted the phone it got stuck in Fastboot screen. Later on I flashed TWRP Recovery and Flashed CrDroid which booted up the phone, But due to some bugs and personal preferences I switched to Xiaomi.eu 12.5 stable.
Click to expand...
Click to collapse
I am having a black screen, and nothing but just my PC can detect it but in Qualcomm HS-USB QDLoader 9008 mode, I was flashing it as I have told, it was on Fastboot Screen but after giving it a restart, it didn't show any sign of light, and now my life is in darkness, but after a research I have found out that I am lost somewhere is EDL mode which is not easily flashable without a Mi Authorized Account as shown in the attached picture.
hexisg said:
What rom did you had before bricking your device?
Click to expand...
Click to collapse
I was on ( miui_ALIOTHGlobal_V12.0.3.0.RKHMIXM ) and I was flashing it/converting it into Redmi K40 12.5.20 after unlocking the bootloader.
AndroidsKings said:
I was on ( miui_ALIOTHGlobal_V12.0.3.0.RKHMIXM ) and I was flashing it/converting it into Redmi K40 12.5.20 after unlocking the bootloader.
Click to expand...
Click to collapse
Did u choose the clean all and lock option ?
AndroidsKings said:
I was on ( miui_ALIOTHGlobal_V12.0.3.0.RKHMIXM ) and I was flashing it/converting it into Redmi K40 12.5.20 after unlocking the bootloader.
Click to expand...
Click to collapse
Hold volume - and power for 15sec. If fastboot pop-up, Flash the original rom and select clean all
I wonder how you managed to do that because i was on stock EEA variant and i unlocked bootloader and flashed xiaomi EU 12.5.2 without issues.
If you cannot acces bootloader your only chance is EDL authorized account , which you have to pay someone who has one.
X0PIRAT3 said:
Did u choose the clean all and lock option ?
Click to expand...
Click to collapse
Yup did that.
X0PIRAT3 said:
Hold volume - and power for 15sec. If fastboot pop-up, Flash the original rom and select clean all
Click to expand...
Click to collapse
Not workking !
hexisg said:
I wonder how you managed to do that because i was on stock EEA variant and i unlocked bootloader and flashed xiaomi EU 12.5.2 without issues.
If you cannot acces bootloader your only chance is EDL authorized account , which you have to pay someone who has one.
Click to expand...
Click to collapse
I think you are right, an EDL authorised account must be needed.
you can use qfil and an approperiate flashable rom,not sure where you can get the qfil rom from but qfil itself is easily downloadable.
edit:actually with qfil you can flash the boot partition only and then you should be able to have a working fastboot again.i think.
metalspider said:
you can use qfil and an approperiate flashable rom,not sure where you can get the qfil rom from but qfil itself is easily downloadable.
edit:actually with qfil you can flash the boot partition only and then you should be able to have a working fastboot again.i think.
Click to expand...
Click to collapse
I am gonna try it tonight. Thank you, I'll report you back.
Now i undersand what you did: you used mi flash to flash stock redmi k40 12.5.2 rom on a stock unlocked Poco F3 Global and you had lock option thicked.That obviously did the trick by bricking your device.You did not searched for the right info on what you need to do.
metalspider said:
you can use qfil and an approperiate flashable rom,not sure where you can get the qfil rom from but qfil itself is easily downloadable.
edit:actually with qfil you can flash the boot partition only and then you should be able to have a working fastboot again.i think.
Click to expand...
Click to collapse
Tried this, but failed !
AndroidsKings said:
Tried this, but failed !
Click to expand...
Click to collapse
theres full EDL roms here:
Download Poco F3 Flash File Firmware EDL ROM
Download Poco F3 Firmware Flash File Stock ROM, here we share latest firmware for Poco F3 with flash tool & usb driver
romprovider.com
I see in mi flash tool the rom you try to flash is the global one not the china rom
metalspider said:
theres full EDL roms here:
Download Poco F3 Flash File Firmware EDL ROM
Download Poco F3 Firmware Flash File Stock ROM, here we share latest firmware for Poco F3 with flash tool & usb driver
romprovider.com
Click to expand...
Click to collapse
Thank you, I am having an error.
hexisg said:
Now i undersand what you did: you used mi flash to flash stock redmi k40 12.5.2 rom on a stock unlocked Poco F3 Global and you had lock option thicked.That obviously did the trick by bricking your device.You did not searched for the right info on what you need to do.
Click to expand...
Click to collapse
You might be right, I did something like that. I'll take care of this next time, mistakes teach a lot.
AndroidsKings said:
Thank you, I am having an error. View attachment 5306329
Click to expand...
Click to collapse
Not really sure but what happen is that something in that path (that's trying to access is wrong). Next time click on details (so we can see the call stack). Try to run it as administrator and extract the mi flash to a "shorter" path: "C:/Miflash"
At this point I think you want to try anything so...