Can't connect to PC... - Xiaomi Mi Mix 2 Questions & Answers

Anyone else have to jump through some kind of hoops to connect to PC? I can't get my PC to see the Mix 2 at all, for file transfer or anything.

Did you install the drivers? I remember doing that when I first connected.

Also,when connecting your Mix 2 to your PC via USB Cable,check the notification/pull-down bar & look for the USB menu ,select Transfer Files or Transfer Photos (PTP).
It may take a few tries when 1st using the Mix 2 (or any new phone) but,afterwards,your PC should have no problem "seeing" your phone.

Good suggestions, I had checked already. Thing is, the PC doesn't see it at all so no way to assign a driver. In other words, there is no device in device manager without a driver. As for the USB options, tried bouncing that around and no change for any of the options with and without USB debug enabled.
My S8+ is seen fine, but it is like the Mix 2 isn't even plugged in from the PC side. I even reinstalled Android Studio a d tried all again to no avail.
Only thing I can think of is to try to USB cable that it came with but that is at home and I am at the office. Damn I hate when phones don't have SD slot, grrr.

SWBgHz said:
Good suggestions, I had checked already. Thing is, the PC doesn't see it at all so no way to assign a driver. In other words, there is no device in device manager without a driver. As for the USB options, tried bouncing that around and no change for any of the options with and without USB debug enabled.
My S8+ is seen fine, but it is like the Mix 2 isn't even plugged in from the PC side. I even reinstalled Android Studio a d tried all again to no avail.
Only thing I can think of is to try to USB cable that it came with but that is at home and I am at the office. Damn I hate when phones don't have SD slot, grrr.
Click to expand...
Click to collapse
Try installing Mi PC Suite,see if that helps:
http://pcsuite.mi.com/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Thanks, may try that though from what I am seeing it won't work as Windows can't see the phone even as unrecognized hardware so no application would be able to either. Will try factory cable first, I think.

Sure enough, works with different cable.

SWBgHz said:
Sure enough, works with different cable.
Click to expand...
Click to collapse
Great,keep us posted w/your results. :good:

Hello, anyone. I have the same issue... different cables tested and drivers installed. I only see : "mi mix 2" on the PC but I cannot access storage and it is not recognized by Mi Suite ....

Sorry to say, i have same problem, it is not driver issue, it is just the phone with usb cannot be recognized as a plugged in devices, but i can see charging....
sorry to come with old posts, but this really sucks, maybe the chipset in the mix 2 or mix 2(s) is malfunction.

i got a related problem. i cannot "see" my phone in the windows explorer. but i installed drivers and can eject my Mi Mix 2s. but in the xiami suite it states: no device connected

AudioJunk said:
i got a related problem. i cannot "see" my phone in the windows explorer. but i installed drivers and can eject my Mi Mix 2s. but in the xiami suite it states: no device connected
Click to expand...
Click to collapse
What about connecting it to another pc?
Search for tools to get rid of old drivers on PC's.

wim69 said:
What about connecting it to another pc?
Search for tools to get rid of old drivers on PC's.
Click to expand...
Click to collapse
i got it figured out... was weird since Windows recognized the model and everyhing

AudioJunk said:
i got it figured out... was weird since Windows recognized the model and everyhing
Click to expand...
Click to collapse
how did you figure it out. I am facing same problem as well. It does charge the phone but cant find in explorer

I'm actually having the same problem here, any solutions yet?

Hi. I have the same problem Please share if you found how to fix it.
I have Mi mix 2. after copy of large iso file, can't transfer files -- It gets stuck in the start of the copy and after I get error that device has disconnected.

Related

[Q] Why can't I install USB drivers?

Hi, I am just wondering why I can't install USB drivers for my phone. I have tried everything that I could find but I still can't make my PC "see" my phone. I tried HTC Sync and that didn't work either.
Does anybody know why this is happening? Is there some driver issue that I am not aware of? Thanks in advance.
What does your PC say when you plug the phone in via USB?
What does your phone do when you plug it in? (You should see options like in the pic below.)
If you have Windows 7, after plugging in your phone - try Windows Update.
If the phone does nothing when you plug it in - have your tried another USB socket?
You could try installing android-sdk_r10-windows.zip
There is a USB package that comes with it which might help but it probably won't. (You shouldn't need any other part or package that comes with it though.)
Edit: Does your PC see other USB devices?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What does your PC say when you plug the phone in via USB? It always attempts to install the USB drivers but it always fail to find one.
What does your phone do when you plug it in? (You should see options like in the pic below.)Yes it does show those options and I always choose "disk drive"
If you have Windows 7, after plugging in your phone - try Windows Update.Already did. Nothing comes up.
If the phone does nothing when you plug it in - have your tried another USB socket? Yes I have, it always try to do the same thing. I remove the USB Drivers from Device Managers but I always end up with the same failed process.
You could try installing android-sdk_r10-windows.zip I already have but nothing happens.
Edit: Does your PC see other USB devices? Yes it does. All my devices are using USB connectors (keyboard, mouse, usb hub, etc.)
I am not considering my phone as a faulty one as I tried to connect it to my Mac and it functions as a disk drive although it disconnects itself on the first minute of it being connected, must be because of some app or something, then functions normally. I hope I can fix this soon because I need to root.
reyaga7 said:
What does your PC say when you plug the phone in via USB? It always attempts to install the USB drivers but it always fail to find one.
What does your phone do when you plug it in? (You should see options like in the pic below.)Yes it does show those options and I always choose "disk drive"
If you have Windows 7, after plugging in your phone - try Windows Update.Already did. Nothing comes up.
If the phone does nothing when you plug it in - have your tried another USB socket? Yes I have, it always try to do the same thing. I remove the USB Drivers from Device Managers but I always end up with the same failed process.
You could try installing android-sdk_r10-windows.zip I already have but nothing happens.
Edit: Does your PC see other USB devices? Yes it does. All my devices are using USB connectors (keyboard, mouse, usb hub, etc.)
I am not considering my phone as a faulty one as I tried to connect it to my Mac and it functions as a disk drive although it disconnects itself on the first minute of it being connected, must be because of some app or something, then functions normally. I hope I can fix this soon because I need to root.
Click to expand...
Click to collapse
Did you solve this problem? I have the same one.
A bad USB connection can cause these problems, use USB one if on a laptop or one in the back of a desktop model.
Sent from my Inspire 4G using xda premium
Try to use the other USB cable or origin USB cable.
Try one more thing. Change a new SD card
Is it second hand phone ? If yes, no comment and too many possibility.
USB Drivers
reyaga7 said:
Hi, I am just wondering why I can't install USB drivers for my phone. I have tried everything that I could find but I still can't make my PC "see" my phone. I tried HTC Sync and that didn't work either.
Does anybody know why this is happening? Is there some driver issue that I am not aware of? Thanks in advance.
Click to expand...
Click to collapse
Hi, I too am having this problem, just got a DHD but when plugged into pc charges but no promt for anything else like all other htc devices. Tried different htc sync suite versions and singular drivers, changed sd cards and cables but still nothing. Any ideas welcome.
Thanks
It depend of the ROM you have (the picture is for a sense rom).
On some you can choose an action to be always performed, so it never prompt.
Go in your settings.
And... clean the phone usb connector. Pockets are sometime dusty
Blow in the connector and try again. Easiest problems are sometime the ones we forget.
which rom do u use?
If you're running Windows 7 64bit, try deleting all driver files via Device Manager, then booting into Windows with the "Disable driver digital signature enforcement" option, then plug in your phone and try to install drivers.
Sorry for slow response.
Im running stock everything to my knowledge, and on xp, tried cleaning usb port, still nothing. Haven't tried different comp, will now...
Edit, tried Vista, nothing. Dunno what to do next.
Sent from my Desire HD using xda premium
Even in charging mode your phone should be detected. Most likely your cable is only for charging or it is damaged. Could also be your phone's micro usb port is damaged. If you are getting nothing on 2 computers it has to be one or the other.
What mode do you have your phone in when you try to connect? In Disk Drive mode your sd card should be detected as a removeable hard drive. And the drivers for this are included in all windows OS. No need to install any drivers for this mode.
Also many have issues with HTC Sync. Try installing MyPhoneExplorer. You can get it from The Market. And it will give you a link in the more information part to install the needed desktop software for your computer. Works well and has many features.

Quick ?

I cant seem to get odin 3 to work on my xp computer(service pack 2) Tried it on my friends computer (window 7) and worked like a charm!(on stock samsung usb cord) Here the crazy part, It recognizes the phone when its on. But in download mode it wont do anything and my computer pops up a message saying usb device is malfunction and cant find the drivers at all. Steps i down to try to fix
reinstall drivers
try to install drivers in download mode phone connected- somehow it finds files that didnt install the first time.
Different usb cables- stock, htc evo, blackberry, and generic brand
Even plugged up to back of motherboard no difference
Going on what i searched and read up on this forum and internet searches etc..
i was thinking maybe its my eset nod 32 virus system???
Seems like my epic experience isnt going good as i hope. Had an evo for almost a year. Then sold evo got epic(epic is brand new) rooted on di18 and running baked snack 1.6 with custom kernal for now. But seems like everybody on 2.2 so i need to figure out how to get this working???? Any help would be nice!!!!
Anybody I know I'm not the only one with this problem?
Yea been running into that problem, I think odin just don't like some computers. I've tried to find a fix before, but I have 1 computer that runs odin fine, so I gave up tryn to fix the others..
Sent from my SPH-D700 using XDA App
Well that sucks. I know there gotta be something to get it to work? Maybe I should try upgrading windows to pro 3??
Update- uninstall nod 32 still no go? Going to try upgrading to pro 3
Try a different file in Odin .... are you trying with only the EB13 file ??
computer wont recognize phone in download with odin. But it will when phone is on and usb debugging is on
you are starting odin first then plugging the phone in while in download mode?
yes message pops up at bottom of screen saying device is unknown or malfunction. Its like the computer acts like their aren't any usb drivers installed.
but when I turn on phone, plug it into computer odin sees it. Com4 or com5. Adb interface is on and computer can see as removable disk?
903tex said:
yes message pops up at bottom of screen saying device is unknown or malfunction. Its like the computer acts like their aren't any usb drivers installed.
but when I turn on phone, plug it into computer odin sees it. Com4 or com5. Adb interface is on and computer can see as removable disk?
Click to expand...
Click to collapse
This might seem like a trivial answer, but have you tried rebooting your computer?
Then, as stated early, re-open ODIN, put your phone in download mode, then plug in the phone?
yea even tried pdanet and that didn't work. Restarted and tried nothing. I guess its that time for a new computer
@iSaint
This is just creepy
But strangely hypnotic
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Went out got a compaq window 7 modem for a good price, and it works like a charm!! Now its time to flash this phone!!!!

tab 3 10.1 gt-p5210 only charging when is turned off and data not working

Hi, i have a tab 3 gt-p5210 of my girlfriend that has this weird problem, if i plug it when its turned on it wont charge or connect to a computer, its only charging when its turned off, and i cant connect it to my pc neither in normal or download mode, it says windows has detected an error with the device and couldnt recongnized...
i thought it was a usb problem and i replaced it(its a cable and its easy and cheap) but the problem its still there... i think it might be a software problem, but i cant change the firmware in any way because i cant connect it to kies or odin, anyone had this problem? i dont know what else to do
sorry for my english
Have you tried a factory reset (backup any apps, photos, music, etc first).
OKAstro said:
Have you tried a factory reset (backup any apps, photos, music, etc first).
Click to expand...
Click to collapse
yeap, but it didnt worked
franco005 said:
Hi, i have a tab 3 gt-p5210 of my girlfriend that has this weird problem, if i plug it when its turned on it wont charge or connect to a computer, its only charging when its turned off, and i cant connect it to my pc neither in normal or download mode, it says windows has detected an error with the device and couldnt recongnized...
i thought it was a usb problem and i replaced it(its a cable and its easy and cheap) but the problem its still there... i think it might be a software problem, but i cant change the firmware in any way because i cant connect it to kies or odin, anyone had this problem? i dont know what else to do
sorry for my english
Click to expand...
Click to collapse
try a battery pull (you will need to remove cover & disconnect the battery on this model)
IronRoo said:
try a battery pull (you will need to remove cover & disconnect the battery on this model)
Click to expand...
Click to collapse
I did that when i replaced the usb cable, but still didnt worked
If you can copy files to the SD or Ext SD, then you might try rooting it. Then you could try a different ROM. I rooted mine following this thread but you would need to use Odin.
There are some threads in the General section about rooting without Odin...you might check those.
And you might uninstall/reinstall Samsung drivers on your PC to see if you can get a connection after that. You might have a bad USB port (not the cable, but the part in your Tab)
OKAstro said:
If you can copy files to the SD or Ext SD, then you might try rooting it. Then you could try a different ROM. I rooted mine following this thread but you would need to use Odin.
There are some threads in the General section about rooting without Odin...you might check those.
And you might uninstall/reinstall Samsung drivers on your PC to see if you can get a connection after that. You might have a bad USB port (not the cable, but the part in your Tab)
Click to expand...
Click to collapse
i couldnt find a root system without odin on this device (P5210) :/ the samsung drivers are ok since i have a s4 and it connects fine, and i replaced all usb port and cable, its the same part
(this one
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
)
it seems like a system bug, its weird but download and recovery mode are not working fine, it says no command, error, things like that, i dont know how that could happened cause the tab was fully stock, i dont know what else can i do, at least i can use it

No more usb access on windows 10

Hi all,
I have a Oneplus 3 with the last update (OxygenOS 5.0.4) and I can't access to my files with an USB cable.
I try on 3 computers with differents cables, and the OTG parameter on ON but nothing works.
Drivers are normally ok.
Do you have a solution?
Best regards,
Jckbrtn
jckbrtn said:
Do you have a solution?
Click to expand...
Click to collapse
Try to turn on usb debugging in developer options
mar.ur said:
Try to turn on usb debugging in developer options
Click to expand...
Click to collapse
Hi,
Thanks but it doesn't work and I never need to do that before.
I don't understand why it doesn't work anymore.
I hadn't try nothing new on my phone.
I think I will try to reset it...
Best regards,
Jckbrtn
@jckbrtn is there connecting with pc in recovery mode ? I mean adb commands
mar.ur said:
@jckbrtn is there connecting with pc in recovery mode ? I mean adb commands
Click to expand...
Click to collapse
I just try to connect my Oneplus with USB cable like I always use to do.
ADB drivers are installed on my PC and I only have the original recovery.
I never try to root this smartphone.
With a OneplusX on LineageOS, no problem. See screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Looking at your photo, have your tried to tap the second option...?
150208 said:
Looking at your photo, have your tried to tap the second option...?
Click to expand...
Click to collapse
Picture is for my OneplusX. It works for the OneplusX on the same computer but not for the Oneplus 3.
I don't have this menu in notification.
jckbrtn said:
Picture is for my OneplusX. It works for the OneplusX on the same computer but not for the Oneplus 3.
I don't have this menu in notification.
Click to expand...
Click to collapse
Oh i see
Try developer options, if i remember it right, i believe there is a setting about USB access in OOS.
Other than that i don't know except factory reset, re-install the PC, or bad usb port (in either of phone/pc).
I have this issue once, but it because my bad usb port on my PC motherboard.
jckbrtn said:
Picture is for my OneplusX. It works for the OneplusX on the same computer but not for the Oneplus 3.
I don't have this menu in notification.
Click to expand...
Click to collapse
Go through and remove the drivers for all the one plus device then connect the 3. The drivers for the two are corrupting each other. It is a known issue with the drivers for this device. I have to reinstall the drivers on every connect and disconnect from USB.
zelendel said:
Go through and remove the drivers for all the one plus device then connect the 3. The drivers for the two are corrupting each other. It is a known issue with the drivers for this device. I have to reinstall the drivers on every connect and disconnect from USB.
Click to expand...
Click to collapse
I only have drivers for the 3. For th OneplusX with the usb, no problem.
Drivers removed but it doesn't works. I think I'll try a reset of my device in a few days to see...
I try on 3 windows computers with differents cables (also the Oneplus one), drivers, no drivers... don't know....
jckbrtn said:
I only have drivers for the 3. For th OneplusX with the usb, no problem.
Drivers removed but it doesn't works. I think I'll try a reset of my device in a few days to see...
I try on 3 windows computers with differents cables (also the Oneplus one), drivers, no drivers... don't know....
Click to expand...
Click to collapse
With the one plus devices you can never tell. It could be anything from software to hardware. Next time you connect pull a log cat this might help.
So I try a factory reset: don't work
I downgrade to oxygen 5.0.3 and 5.0.1: don't work
I try on an other laptop where I never plug my oneplus or install drivers/adb: don't work
I also try with different cables (original from oneplus include): don' work
With otg option on, usb debugging on, ... or without, don't work!
And best is I can't install LineageOS as I have no access on my PC
zelendel said:
With the one plus devices you can never tell. It could be anything from software to hardware. Next time you connect pull a log cat this might help.
Click to expand...
Click to collapse
Yes, I think it's hardware. USB-C don't work with OTG adapter (USB-C to USB and USB key).
Log cat? How to?
I just bought an used 3T and have the same problem. I have tried every possible software solution I guess I have to try to replace USB port but if it doesn't help I don't know what I'll do...
I had the same issue but a fix I found to work was when my Oneplus 3 was plugged into my computer, the dropdown notification that says "Android System" - USB charging this device can be changed to transfer files and after that option is picked, my phone is detected by my computer. Maybe this will help some of you
stingerbs said:
I had the same issue but a fix I found to work was when my Oneplus 3 was plugged into my computer, the dropdown notification that says "Android System" - USB charging this device can be changed to transfer files and after that option is picked, my phone is detected by my computer. Maybe this will help some of you
Click to expand...
Click to collapse
Problem is I don't have this menu anymore since my usbc port is not working
stingerbs said:
I had the same issue but a fix I found to work was when my Oneplus 3 was plugged into my computer, the dropdown notification that says "Android System" - USB charging this device can be changed to transfer files and after that option is picked, my phone is detected by my computer. Maybe this will help some of you
Click to expand...
Click to collapse
I'm waiting for a response of the oneplus support. My smartphone is still under warranty so I asked for a RMA.
I had to make a video of me connecting the phone to my computer to show the issue.
I also made a video with an other usbc smartphone to show that all is working.
jckbrtn said:
I'm waiting for a response of the oneplus support. My smartphone is still under warranty so I asked for a RMA.
I had to make a video of me connecting the phone to my computer to show the issue.
I also made a video with an other usbc smartphone to show that all is working.
Click to expand...
Click to collapse
So after 2 weeks of mail contact, my smartphone was sent from Belgium to Poland monday.
I received my repaired smartphone on wednesday.
Technical support very good! Mail support very complicated...

Google Pixel 3XL - file transfer problem

I am unable to see the files on my Google Pixel 3XL when I connect it to my Windows 7 Pro computer.
When I connect the phone, the computer makes a sound (as expected). When I change the ‘Use USB for’ setting to ‘File transfer’, the computer makes two sounds (again, as expected). However, after making this change, my phone does not appear in Windows Explorer.
When I change the ‘Use USB for’ setting to ‘PTP’, the computer makes two sounds (again, as expected) and the phone does appear in Windows Explorer, but the only two folders made available are DCIM and Pictures.
I went to Control Panel->Device Manager and saw a Google Nexus ADB Interface device. I tried ‘Update Driver Software’, but was informed that I have the most recent version.
This problem occur both when the adb server is running and not running. It also occur both when USB debugging is enabled and disabled.
The problem is not the cable or the USB port – they are the ones I used to root the phone. And no, the rooting is not an issue as the problem existed prior to my rooting the phone. I found this thread, https://forum.xda-developers.com/pixel-3-xl/how-to/pixel-3-xl-usb-connections-file-t3864057, and tried as suggested, but that did not resolve the problem. (In fact, changing the setting had no effect – after rebooting, when I connected the device to my computer, it defaulted to charging.)
I tried this on two USB2 ports and one USB3 port – no change in behavior.
Any suggestions for addressing this problem?
Try deleting the driver and let it install again.
I should have figured that out. Thanks - that worked.
Sorry to jump aboard, but I have the exact same problem. Was able to unlock bootloader and root, but can only transfer files in PTP mode. I can then transfer them on the phone to the correct place, but this is obviously a poor excuse for a workaround. Deleting and reinstalling drivers did nothing.
Any other thoughts?
Deleting and reinstalling worked for me...
I just attached my phone to the computer, selected 'File Transfer', and then open Device Manager. The applicable driver is the Android Sync Composite ADB Interface for which I show a version number 13.0.1202.0 with a date of 2 Dec 2013.
bgg1 said:
Sorry to jump aboard, but I have the exact same problem. Was able to unlock bootloader and root, but can only transfer files in PTP mode. I can then transfer them on the phone to the correct place, but this is obviously a poor excuse for a workaround. Deleting and reinstalling drivers did nothing.
Any other thoughts?
Click to expand...
Click to collapse
Delete or remove the device from the Device Manager, restart your computer and plug it in again.
airmaxx23 said:
Delete or remove the device from the Device Manager, restart your computer and plug it in again.
Click to expand...
Click to collapse
The device is only listed (as a camera icon under other devices) when it's plugged in. As soon as I remove it it's no longer listed under device manager. Should I do this while it's connected?
bgg1 said:
The device is only listed (as a camera icon under other devices) when it's plugged in. As soon as I remove it it's no longer listed under device manager. Should I do this while it's connected?
Click to expand...
Click to collapse
Yes.
No luck for 3XL on Q beta 2
Hey all,
I'm having the same issue on my Win10 PCs. I've uninstalled the driver in device manager (Listed as Pixel 3) and have tried both PTP and File Transfer. I'm going to guess that it's due to something in the 2nd Android Q Beta but I can't be sure. I've attempted to use both the android file manager and SanDisk Memory Zone to move the files off but neither work as well.
Attached is a picture of how my PCs see the files. They are not view-able nor are they transferable.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Categories

Resources