check firmware version? - One (M9) Q&A, Help & Troubleshooting

So I managed to flash a rooted developer edition rom on my m9 and when I tried to run ota updates, I got an error saying that it couldn't finish because my phone's software has been modified. After some searching around (and admiditantly some arguing), found out that it's because my firmware doesn't match my android version. I'm still running android 5.0.2 and I don't THINK I messed with the firmware. So how do I check the firmware version and find either a rom (preferably as close to stock as possible) or a ruu that will work for the software/firmware versions that I'm using?

Please do a "fastboot getvar all" and post here.
Sent from my HTC One M9 using Tapatalk

With the phone in download or bootloader?

Donnie267 said:
With the phone in download or bootloader?
Click to expand...
Click to collapse
Download
Sent from my HTC One M9 using Tapatalk

lucyr03 said:
Download
Sent from my HTC One M9 using Tapatalk
Click to expand...
Click to collapse
There ya go

Download this RUU: https://androidfilehost.com/?fid=96039337900114053
Rename it to 0PJA100.zip
Put it in root of your card(fat32 formatted).
Boot in download(make sure you have sufficient battery) and follow instructions.
P.S: First backup your data, this procedure will erase all your data.
Sent from my HTC One M9 using Tapatalk

I thought ruu doesn't work from the sdcard

Donnie267 said:
I thought ruu doesn't work from the sdcard
Click to expand...
Click to collapse
It works and it's the simplest way in my opinion.
Tell me if it worked or what problem you encounter.
Sent from my HTC One M9 using Tapatalk

Oh. And I won't be able to get ota from AT&T because I'm on MetroPCS so I'll need a ruu for metro, tmo or developer

Donnie267 said:
Oh. And I won't be able to get ota from AT&T because I'm on MetroPCS so I'll need a ruu for metro, tmo or developer
Click to expand...
Click to collapse
If you have S-OFF it's simple to convert, I'll show you a little tutorial.
If you don't have S-OFF it's impossible and you'll be stuck with this firmware if you won't get an AT&T sim.
Sent from my HTC One M9 using Tapatalk

I don't have S-offor or the $25 for sunshine. Shouldn't there be a t-mobile, MetroPCS or developer rom or ruu that's compatible with the firmware I'm using?

I don't have S-offor or the $25 for sunshine. I used twrp to flash developer. Shouldn't there be a t-mobile, MetroPCS or developer rom or ruu that's compatible with the firmware I'm using?

Donnie267 said:
I don't have S-offor or the $25 for sunshine. Shouldn't there be a t-mobile, MetroPCS or developer rom or ruu that's compatible with the firmware I'm using?
Click to expand...
Click to collapse
You can only flash AT&T because of CID, every carrier have different CID and because that the different RUU will give you error.
Only with S-OFF you can change CID and MID and flash any GSM RUU.
So, you're stuck with 1.32.502.9 firmware until you get an AT&T sim to update it or s-off it.
With this firmware you can only flash custom roms with Android version 5.x and some 6.0.x but just few 6.0.x and maybe will be unstable.
Sent from my HTC One M9 using Tapatalk

Ah, okay. So basically, I have to go back to AT&T then use a series of ruu files to work my way to nougat then finally flash the custom rom?

Donnie267 said:
Ah, okay. So basically, I have to go back to AT&T then use a series of ruu files to work my way to nougat then finally flash the custom rom?
Click to expand...
Click to collapse
Or you can just flash this RUU, then update it from settings, it's more simple.
Sent from my HTC One M9 using Tapatalk

That's actually why I tried flashing a rom. AT&T won't let you get updates unless you're using their sim card for some ungodly reason.

Donnie267 said:
That's actually why I tried flashing a rom. AT&T won't let you get updates unless you're using their sim card for some ungodly reason.
Click to expand...
Click to collapse
I understand what you tried but it's impossible to jump firmware to 2.xx.502.xx or more with RUU, this can be done only with OTA on S-ON phones.
Sent from my HTC One M9 using Tapatalk

Is it possible to go from one ruu to the next until I get the phone to nougat though?

Donnie267 said:
Is it possible to go from one ruu to the next until I get the phone to nougat though?
Click to expand...
Click to collapse
No, you cannot update it to 2.xx.502.xx or more with RUU, just OTA, Flippy explained you why in the other thread(different encryption between 1.... 2... 3... and 4... firmwares).
So the only way to update your firmware is to flash the RUU I give you(don't flash twrp, root,etc), get an AT&T sim and update it from settings until you reach nougat.
I don't explain it one more time... I think I explained the same thing in different ways 3-4 times....
Sent from my HTC One M9 using Tapatalk

Excuse me. I was thinking/hoping software provided by HTC themselves would be able to upgrade the firmware along with the OS instead of forcing everyone to be stuck with the only option for software upgrades from a carrier that we don't even want/use. It only makes sense that if it can be done on samsung phones, which I've rooted and flashed several times, it could also be done on HTC. So it looks like the only way to get nougat is to suck AT&T's ****. Thanks.

Related

[Q] Is there anyway to bring the M8 on T-mobile back to stock ?

I have rooted and flashed a custom recovery on my HTC One M8, only to find out that firewater s-off doesn't work on my phone. Now there is a tampered notification on Hboot and I cannot get OTA updates. Is there a RUU zip or stock ROM RUU .exe for the T-Mobile version of it ? Please help me !?
How do you root and add custom recovery?
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Cj did you try a few more times? After flashing a custom ROM?
Sent from my XT1049 using Tapatalk
Do you mean did I try to do S-off using a custom ROM ? No I did not try that. I honesty didn't want to deviate to much away from stock.
EeyoreSyndrome said:
Cj did you try a few more times? After flashing a custom ROM?
Sent from my XT1049 using Tapatalk
Click to expand...
Click to collapse
cjegan2008 said:
Do you mean did I try to do S-off using a custom ROM ? No I did not try that. I honesty didn't want to deviate to much away from stock.
Click to expand...
Click to collapse
HTC has not released an RUU for the HTC One M8 yet so you have to wait. that's why I'm still stock not even root or custom recovery. Always have a way to go back to complete stock before making any mods if you are not sure.
epsiblivion said:
HTC has not released an RUU for the HTC One M8 yet so you have to wait. that's why I'm still stock not even root or custom recovery. Always have a way to go back to complete stock before making any mods if you are not sure.
Click to expand...
Click to collapse
Technically you can just install the custom recovery, then Nandroid your current Rom IMG after that and back it up to the external SD card or Cloud Storage if you wanna go back to "stock/rooted" Before you play with any Roms.
Tho yes I understand your view. I was rooted on 4.4.2 on my bootloader locked Republic Wireless Moto X and it had a force close settings issue...
Needless to say I accidentally wiped my system and was stuck having to RSD Lite back to 4.4.2 stock unrooted because of that, thus loosing root forever (as they patched the exploit in 4.4.2 and the new bootloader doesn't allow for downgrading back to 4.2.
RUU here:
http://forum.xda-developers.com/showpost.php?p=51836232&postcount=1
Thank you ! I flashed back to stock, everything's swell now...I wish I could get S-off though because I really want the Hardmon/Kardon hack for my M8.....:| idk???maybe someday....
SmiLey497 said:
RUU here:
http://forum.xda-developers.com/showpost.php?p=51836232&postcount=1
Click to expand...
Click to collapse
cjegan2008 said:
Thank you ! I flashed back to stock, everything's swell now...I wish I could get S-off though because I really want the Hardmon/Kardon hack for my M8.....:| idk???maybe someday....
Click to expand...
Click to collapse
Are you sure you need S-OFF for HK? I thought I read here someone was able to use the S-ON download from the HK thread and it worked.
Can the RUU be run even if you convert to GPE or is there more to the process?
Can you find that thread ? Because S-Off doesn't work on my phone at all.
FreydNot said:
Are you sure you need S-OFF for HK? I thought I read here someone was able to use the S-ON download from the HK thread and it worked.
Click to expand...
Click to collapse
cjegan2008 said:
Can you find that thread ? Because S-Off doesn't work on my phone at all.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2737498
Fully Working Harman / Kardon "conversion" for all HTC ONE M8 variants! - May 05
It's better off you are S off, but you can still attempt it. The thing is if you need to update the drivers, it is strongly recommended to be S off. For 25 dollars, I used sunshine and was able to get s off. Depends on how bad you want it, I suppose.
The thing is, I have a T-Mobile M8 and my device will not allow me at all to S-off. I tried firewater with no dice. So I'm willing to pay a bit to get S-Off.
AmeriKan47 said:
http://forum.xda-developers.com/showthread.php?t=2737498
Fully Working Harman / Kardon "conversion" for all HTC ONE M8 variants! - May 05
It's better off you are S off, but you can still attempt it. The thing is if you need to update the drivers, it is strongly recommended to be S off. For 25 dollars, I used sunshine and was able to get s off. Depends on how bad you want it, I suppose.
Click to expand...
Click to collapse
I have a Tmo too. I just used sunshine the other day and I am happy. It worked where the others wouldn't.
How do you use sunshine ?
AmeriKan47 said:
I have a Tmo too. I just used sunshine the other day and I am happy. It worked where the others wouldn't.
Click to expand...
Click to collapse
cjegan2008 said:
How do you use sunshine ?
Click to expand...
Click to collapse
Here's a good writeup. Basically DL the apk and go from there.
http://www.androidpolice.com/2014/0...k-on-any-rooted-htc-one-m8-or-similar-device/
Does anyoen know if there is a T-mobile RUU .zip for the M8 ? That has everything stock ? I just converted the Verizon M8 to T-mobile but I do not have the T-mobile stock RUU to flash my device using ADB....
cjegan2008 said:
Does anyoen know if there is a T-mobile RUU .zip for the M8 ? That has everything stock ? I just converted the Verizon M8 to T-mobile but I do not have the T-mobile stock RUU to flash my device using ADB....
Click to expand...
Click to collapse
This is the ROM zip from the Tmo 1.57.531.7 RUU
https://www.androidfilehost.com/?fid=23501681358537777
Sent from my HTC One using Tapatalk
Relock and flash the ruu
Sent from my HTC One_M8 using XDA Free mobile app
Thank you for the ROM image, however, when I flash this zip, this is what it says on CMD:
C:\Users\Administrator>fastboot flash zip "C:\Users\Administrator\Downloads\rom
(1).zip"
target reported max download size of 1830612992 bytes
sending 'zip' (1482813 KB)...
OKAY [ 58.061s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 112.768s
What am i supposed to do now ?
PunishedSnake said:
Relock and flash the ruu
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse

dumb firmware question

Sorry, I should know but I can't find the answer searching.
US unlocked unit on ATT, S-ON, running Viper 1.1.0. My baseband is 1.0.U......3_45.00_F
Build 1.30
Is there updated firmware I should flash or is this the most current? Not getting the baseband/build difference. Have rooted for years and run custom roms but am not a techie. Thanks in advance.
tomplatz said:
Sorry, I should know but I can't find the answer searching.
US unlocked unit on ATT, S-ON, running Viper 1.1.0. My baseband is 1.0.U......3_45.00_F
Build 1.30
Is there updated firmware I should flash or is this the most current? Not getting the baseband/build difference. Have rooted for years and run custom roms but am not a techie. Thanks in advance.
Click to expand...
Click to collapse
There is never a dumb question we all need help and have questions so no worries mate
This is the latest version out for US unlocked HTC10
http://www.htc.com/us/support/htc-10/news/
or
http://www.htc.com/us/support/rom-downloads.html
Current is 1.53.617.5
Thank you. Looks like if i flash this i'll be back at stock and then can just reinstall viper.
Thanks!
Sent from my HTC 10 using XDA-Developers mobile app
tomplatz said:
Thank you. Looks like if i flash this i'll be back at stock and then can just reinstall viper.
Thanks!
Sent from my HTC 10 using XDA-Developers mobile app
Click to expand...
Click to collapse
Or get S-OFF, and simply take out the "firmware.zip" file out of the RUU, there is no reason for wiping or going back to stock, then via sd card you can flash the firmware in Download/Fastboot mode, or you can use a Computer to do it.
I highly suggest you get S-OFF now before HTC possibly patches it like they have many many times before, if so it could be a while before an update is available to make Sunshine work again, they are the best at getting around to it though, but HTC has blocked them before on older devices.
Besides S-ON is horrible and causes issues, like for example without a custom kernel or a kernel patch in some cases you can't install Viper4android driver, or Adaway won't work, issues like that, S-ON blocks certain writes to succeed on /System, basically S-ON=Half A** Root. :laugh:
I must be doing something wrong. I am now S-OFF via Sunshine. Downloaded the firmware package and flashed. Seemed to work, I had 1.53 in bootloader. Created a bit of havoc and had to reinstall ViperRom a few times to get the phone working again. Now showing 1.30 in About tab again.
Anyone?
Because there rom is based on 1.30
Sent from my HTC 2PS6200 using XDA-Developers mobile app
so is there a way to make venomrom work on 1.53?
Thanks in advance
tomplatz said:
so is there a way to make venomrom work on 1.53?
Thanks in advance
Click to expand...
Click to collapse
You're confusing the ROM build with your firmware. The system about info will not tell you your firmware. It shows 1.30.* because that's the ROM build.
Boot into downloader mode and it'll show your firmware as being 1.53.617.5
You will not get best performance out of a Euro build, it's missing the carrier provision information for US carriers.
Sent from my HTC 10 using Tapatalk
tomplatz said:
so is there a way to make venomrom work on 1.53?
Thanks in advance
Click to expand...
Click to collapse
I am on US Unlocked and 1.53.617.5 firmware using Viper 10 1.2 on T-Mobile. It works great! I notice nothing different about my signal or interface with my carrier. I have VoLTE and WiFi Calling working and working well. Also, I have read that people have working VoLTE for AT&T in the Viper10 thread.
You could also use BadBoyz which is based on the US Unlocked 1.53.617.5.

MM to N firmware advice

Hi guys.
Finally decided to jump to N firmware.
Followed the guide on how to do it as I was on Viper.
Now I have uprooted, back to stock recovery and on stock MM 1.80.401.3 and have tried to update using the OTA Update file and stock recovery but it won't work. Keeps failing, complaining about strange file structure or something.
Any tips?
Roshi69 said:
Hi guys.
Finally decided to jump to N firmware.
Followed the guide on how to do it as I was on Viper.
Now I have uprooted, back to stock recovery and on stock MM 1.80.401.3 and have tried to update using the OTA Update file and stock recovery but it won't work. Keeps failing, complaining about strange file structure or something.
Any tips?
Click to expand...
Click to collapse
There is a WWE RUU, just flash this?
Ensure you backup all your data when flashing it though...it will wipe everything, including your internal sdcard.
The much easier way would be to S-oFF and flash the nowipe firmware in fastboot.
j to the 4n said:
There is a WWE RUU, just flash this?
Ensure you backup all your data when flashing it though...it will wipe everything, including your internal sdcard.
The much easier way would be to S-oFF and flash the nowipe firmware in fastboot.
Click to expand...
Click to collapse
I just got my S-Off last weekend but have not done anything with it so far. What is nowipe firmware?
lexridge said:
I just got my S-Off last weekend but have not done anything with it so far. What is nowipe firmware?
Click to expand...
Click to collapse
A firmware package that doesn't wipe your phone's data when you flash it, as opposed to something like an ruu that typically wipes your phone when you glass it.
https://forum.xda-developers.com/htc-10/how-to/2016-05-27-fastboot-flashing-firmware-t3387520
lexridge said:
I just got my S-Off last weekend but have not done anything with it so far. What is nowipe firmware?
Click to expand...
Click to collapse
As I see you are on Sprint though, this is not the right thread for you...seems you are on Android N anyway already.
Tarima said:
A firmware package that doesn't wipe your phone's data when you flash it, as opposed to something like an ruu that typically wipes your phone when you glass it.
https://forum.xda-developers.com/htc-10/how-to/2016-05-27-fastboot-flashing-firmware-t3387520
Click to expand...
Click to collapse
Thank you for your replies. I am only curious because I am fairly new to this phone, and I do travel abroad. I just want to make sure I know everything about it when I finally SuperCID to 1111111 and flash GSM firmware. I just don't want any surprises when I do that. So I watch all the HTC 10 forums, whether or not Sprint. I own this phone. It is not a lease or under contract. I am free to do whatever I want to do with it, I think.
---------- Post added at 01:09 AM ---------- Previous post was at 01:04 AM ----------
Tarima said:
A firmware package that doesn't wipe your phone's data when you flash it, as opposed to something like an ruu that typically wipes your phone when you glass it.
https://forum.xda-developers.com/htc-10/how-to/2016-05-27-fastboot-flashing-firmware-t3387520
Click to expand...
Click to collapse
Very informative link. Thank you. I won't be using the "Batch Tool" as I only run Linux since 1995 and never Windows, which this seems to be written for. Not a problem, as I might be able to compile it for Linux.
Has anyone got a link to the proper RUU I need? I can't seem to get the right one.
I'm back to completely stock everything MM firmware.
I've tried a few of the RUU. EXE files but always get the wrong one lol.
HTC 10 unlocked from the united kingdom and used on EE.
Currently on MM 1.80.401.3
Sent from my HTC 10 using Tapatalk
Roshi69 said:
Has anyone got a link to the proper RUU I need? I can't seem to get the right one.
I'm back to completely stock everything MM firmware.
I've tried a few of the RUU. EXE files but always get the wrong one lol.
HTC 10 unlocked from the united kingdom and used on EE.
Currently on MM 1.80.401.3
Sent from my HTC 10 using Tapatalk
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=673368273298942448
j to the 4n said:
https://www.androidfilehost.com/?fid=673368273298942448
Click to expand...
Click to collapse
That software you linked is failing with the error code:
"158:image error. Get the correct ROM Update Utility and try again"
Any ideas? Im running windows 10 if it helps, Also tried to run it in compatibility mode (Windows 7)
lexridge said:
Thank you for your replies. I am only curious because I am fairly new to this phone, and I do travel abroad. I just want to make sure I know everything about it when I finally SuperCID to 1111111 and flash GSM firmware. I just don't want any surprises when I do that. So I watch all the HTC 10 forums, whether or not Sprint. I own this phone. It is not a lease or under contract. I am free to do whatever I want to do with it, I think.
---------- Post added at 01:09 AM ---------- Previous post was at 01:04 AM ----------
Very informative link. Thank you. I won't be using the "Batch Tool" as I only run Linux since 1995 and never Windows, which this seems to be written for. Not a problem, as I might be able to compile it for Linux.
Click to expand...
Click to collapse
If you have a Sprint device you can't flash GSM firmware, you can only flash Sprint firmware. Sorry.
EDIT: I take that back. Apparently with the 10 you can convert from Sprint https://forum.xda-developers.com/showpost.php?p=71195268&postcount=5
xunholyx said:
If you have a Sprint device you can't flash GSM firmware, you can only flash Sprint firmware. Sorry.
EDIT: I take that back. Apparently with the 10 you can convert from Sprint https://forum.xda-developers.com/showpost.php?p=71195268&postcount=5
Click to expand...
Click to collapse
I don't have a sprint device.
I think it's unlocked (using an EE sim in it).
In the UK
Sent from my HTC 10 using Tapatalk
Roshi69 said:
I don't have a sprint device.
I think it's unlocked (using an EE sim in it).
In the UK
Sent from my HTC 10 using Tapatalk
Click to expand...
Click to collapse
I was replying to the person I quoted
xunholyx said:
If you have a Sprint device you can't flash GSM firmware, you can only flash Sprint firmware. Sorry.
EDIT: I take that back. Apparently with the 10 you can convert from Sprint https://forum.xda-developers.com/showpost.php?p=71195268&postcount=5
Click to expand...
Click to collapse
Yes indeed. I have been following that thread (and a few others) quite closely.
.
Anyway I can even get the original OTA to work again or is it broke forever?
Really want to get onto stock Number firmware ?
Sent from my HTC 10 using Tapatalk

root verizon with latest updates

I purchased the m9 on Ebay and made the mistake of downloading the latest updates from big red, anyway to root this device at this point?
geno7 said:
I purchased the m9 on Ebay and made the mistake of downloading the latest updates from big red, anyway to root this device at this point?
Click to expand...
Click to collapse
I assume you mean, you want to unlock the bootloader and gain S-Off?
there's no harm in trying the easiest option
http://theroot.ninja/download.html
if it is going to succeed it will tell you before you have to pay.
Thanks for your response. Unfortunately it didn't work. Any way to flash the phone back to an older version of the software, an ruu without being s-off?
Sent from my HTC6535LVW using Tapatalk
geno7 said:
Thanks for your response. Unfortunately it didn't work. Any way to flash the phone back to an older version of the software, an ruu without being s-off?
Sent from my HTC6535LVW using Tapatalk
Click to expand...
Click to collapse
well, the older firmware and ruu files are here
https://forum.xda-developers.com/ve...t/6-0-verizon-htc-one-m9-marshmallow-t3316279
I'm pretty sure you could completely go back to 3.37.605.7
firmware in post 2: https://forum.xda-developers.com/showpost.php?p=65358020&postcount=2
RUU in post 4 : https://forum.xda-developers.com/showpost.php?p=65358513&postcount=4
I'm pretty sure you could completely go back to 3.37.605.7
edit : the link to .7 seems to be broken, however the .13 is working
edit 2 : I have a saved 3.37.605.7 RUU file if you find that .13 doesn't work
I followed the instructions in this thread (about a week ago) and it worked like a dream.
https://forum.xda-developers.com/ve...t-unlock-s-verizon-m9-mm-3-37-605-13-t3457717
Victory!!! Unlocked and s-off. Thank you so much for the help.

VoLTE support on hTc one m8!

I'm using the Indian variant of hTc one m8 with latest build of Lineage os (root enabled). I have tried enabling volte by *#*#4636#*#* method but it don't let me enable the volte there (its not highlighted). Is there any firmware or any other method to enable VoLTE in my device.
stylophoenix said:
I'm using the Indian variant of hTc one m8 with latest build of Lineage os (root enabled). I have tried enabling volte by *#*#4636#*#* method but it don't let me enable the volte there (its not highlighted). Is there any firmware or any other method to enable VoLTE in my device.
Click to expand...
Click to collapse
Flash the AT&T RUU. That's the only way I know that works.
Sent from my ZTE A2017U using Tapatalk
n1234d said:
Flash the AT&T RUU. That's the only way I know that works.
Click to expand...
Click to collapse
AT&T's ruu's gonna work in phone? I'm rooted and with lineage OS. My phone isn't gonna be bricked?
stylophoenix said:
AT&T's ruu's gonna work in phone? I'm rooted and with lineage OS. My phone isn't gonna be bricked?
Click to expand...
Click to collapse
You need to be s-off and change your MID to the AT&T MID and CID to AT&T or superCID. Then you can flash the RUU, and you should be in business.
Sent from my ZTE A2017U using Tapatalk
n1234d said:
You need to be s-off and change your MID to the AT&T MID and CID to AT&T or superCID. Then you can flash the RUU, and you should be in business.
Sent from my ZTE A2017U using Tapatalk
Click to expand...
Click to collapse
Actually all that is needed with the M8 is superCID to flash the RUU, although changing the MID might be needed for VoLTE. I'm not sure about that part since I'm not from India
xunholyx said:
Actually all that is needed with the M8 is superCID to flash the RUU, although changing the MID might be needed for VoLTE. I'm not sure about that part since I'm not from India
Click to expand...
Click to collapse
I tried flashing the RUU with superCID, but it didn't work. Also, couldn't change the mid in the RUU because it's encrypted so ended up having to change the mid on the phone.
Sent from my ZTE A2017U using Tapatalk

Categories

Resources