OP3 Touch Screen Issue. - OnePlus 3 Questions & Answers

Hi, im currently on jamal's custom rom oreo. Also using blu spark kernel. This morning, suddenly my phone's touch started acting up. Now, when I type using the keyboard, different keys gets pressed. Then it'll disappear then appear again. Is this a hardware problem? Or I could clean flash a new rom?

jfodra said:
Hi, im currently on jamal's custom rom oreo. Also using blu spark kernel. This morning, suddenly my phone's touch started acting up. Now, when I type using the keyboard, different keys gets pressed. Then it'll disappear then appear again. Is this a hardware problem? Or I could clean flash a new rom?
Click to expand...
Click to collapse
Flash full stock stable build (4.5.1) and if it still happens contact OnePlus

jfodra said:
Hi, im currently on jamal's custom rom oreo. Also using blu spark kernel. This morning, suddenly my phone's touch started acting up. Now, when I type using the keyboard, different keys gets pressed. Then it'll disappear then appear again. Is this a hardware problem? Or I could clean flash a new rom?
Click to expand...
Click to collapse
Do you have any screen protector?

I had same problem many times with my older phones ! "Ghost touch", this is very annoying.
In most of cases the best solution was to change charger or clean flash the phone.

xGOGI said:
Do you have any screen protector?
Click to expand...
Click to collapse
No, I don't have any. :/

Bryandu13 said:
I had same problem many times with my older phones ! "Ghost touch", this is very annoying.
In most of cases the best solution was to change charger or clean flash the phone.
Click to expand...
Click to collapse
I'll try clean flashing if that would solve anything. Thanks

I tried clean flashing, but it still has the occassional "ghost touch". Is this a hardware problem? I hope it isn't. It also freaks out when I'm in twrp.

Are u using ur phone while charging?

Related

Touch panel trouble

Noticed something strange for the first time , screen is laggy and not responsive while charging the phone , I think it maybe is the kernel as its the first time to notice this , It happened after flashing franco-r6 kernel and iam using insert coin 6.3.1 Rom
Is this normal ?
Sent from my HTC One X using XDA
You flashed a ROM, You're not stock therefore you need to consult the dev of that Rom about the issue.
To be fair, I had this issue on stock.. so it probably isn't a problem with the ROM
Nit3m4re said:
To be fair, I had this issue on stock.. so it probably isn't a problem with the ROM
Click to expand...
Click to collapse
Is it still present ? What did u do about it ?
Sent from my HTC One X using XDA
Nit3m4re said:
To be fair, I had this issue on stock.. so it probably isn't a problem with the ROM
Click to expand...
Click to collapse
Yep I get this issue at times as well. Especially when I've left it to charge for a while and try to perform a pattern unlock. Happens about twice a week or so. Screen returns to normal after 10 seconds or so. Weird.
+1 this happens on stock roms all the time. it's intermittent, and often can be temporarily fixed by switching the screen off then on again.
I'm about to send my phone in for repair because of this problem. I actually have a dead patch on the screen which is intermittent. If I go to Developer Options > Pointer Location, and then trace my finger around the screen, I can see the patch where it's not picking up the input. Also sometimes the phone behaves erratically and can become completely unresponsive and flicks back and forth between home screens. Turning the screen off and then on again fixes it temporarily.

[Q] Continous Vibration

Hello people!
I am a new member with XDA Developers
Anyways, I would like to ask if any of you face this problem where at any random time the phone would start vibrating continously until you shut down the phone and is there a fix for this?
l_daruwala said:
Hello people!
I am a new member with XDA Developers
Anyways, I would like to ask if any of you face this problem where at any random time the phone would start vibrating continously until you shut down the phone and is there a fix for this?
Click to expand...
Click to collapse
Hello and welcome the the XDA Forum!
I've found at time that the app "Whatsapp" when I get a message, My phone will constantly vibrate until the screen goes off for 5-10 seconds then it's fine until I turn the screen / unlock the phone, I think it's a common problem as I remember someone else had this issue.
Jamie
jamidodger1 said:
Hello and welcome the the XDA Forum!
I've found at time that the app "Whatsapp" when I get a message, My phone will constantly vibrate until the screen goes off for 5-10 seconds then it's fine until I turn the screen / unlock the phone, I think it's a common problem as I remember someone else had this issue.
Jamie
Click to expand...
Click to collapse
Yes i also found that too, but sometimes I encounter the problem with SMS too. Never encountered this problem with my previous phones, the GALAXY Ace (GT-S5830) and the GALAXY 3 (GT-I5801)
l_daruwala said:
Yes i also found that too, but sometimes I encounter the problem with SMS too. Never encountered this problem with my previous phones, the GALAXY Ace (GT-S5830) and the GALAXY 3 (GT-I5801)
Click to expand...
Click to collapse
It hasn't done it for SMS for me but yeah it never did it on my previous phone either ZTE Blade
When my profile switch app change profile and take phone to silent mode sometimes makes my W too...
The only solution reboot...
Looks like this affects all GALAXY W's
l_daruwala said:
Looks like this affects all GALAXY W's
Click to expand...
Click to collapse
Yes, and it happens always the best time... meetings, driving...etc.
never happen to me
but if it happened, I'll flash a new fresh ROM and see if it solves the problem
Happens to mine, seems like it was only when Whatsapp and something else had a notification at the same time.
soulbkd said:
never happen to me
but if it happened, I'll flash a new fresh ROM and see if it solves the problem
Click to expand...
Click to collapse
I had many ROMs like: Stock, Kezra, F.A.W Special. I get vibration in each case.
mayerkemp said:
I had many ROMs like: Stock, Kezra, F.A.W Special. I get vibration in each case.
Click to expand...
Click to collapse
that's weird, mine never experience it
I have tried stock, Bagux's, Blacknote, Kezra, and deodexed rom.
maybe something to do with HW version?
mine is rev 0.6 (via *#2222#)
soulbkd said:
that's weird, mine never experience it
I have tried stock, Bagux's, Blacknote, Kezra, and deodexed rom.
maybe something to do with HW version?
mine is rev 0.6 (via *#2222#)
Click to expand...
Click to collapse
Unfortunately mine too. No more idea.
Damn, mine is also REV 0.6 as well.
Still same problem
Mine also rev 0.6
Tried Rebel Rom, Bagux, Bionic Cow 2 v 7, stock DXLM3, stock XXLM8 , all still has the same random vibration.
And the vibration won't stop until you reboot.
Probably hardware related?
This happens to me since the first day I got this phone...
Honestly, it's annoying me !
Cause the only way to Stop it, is a reboot..
Sometimes it starts to vibrate in school, and as Im using a TPU SoftCase it's even more uncomfortable...
I thaught I was the only one, but seems like it affects all Wonders..
No matter which Rom I use, everytime the same Problem
A random time.
mayerkemp said:
I had many ROMs like: Stock, Kezra, F.A.W Special. I get vibration in each case.
Click to expand...
Click to collapse
same problem

[problem] CM11 Black screen ISSUE {c1905}

Hello everyone. I've just installed few CM11-based roms (MIUI and AOKP) and noticed a strange thing. When I am just locking my phone and trying to unlock it after a while, screen doen's wake up. It just stays black and there is no reaction for power button. I have to reboot my phone by removing battery so that is really annoying. Stock was working fine, i hadn't notice anything like that. Anyone know the solution?
Mardrom said:
Hello everyone. I've just installed few CM11-based roms (MIUI and AOKP) and noticed a strange thing. When I am just locking my phone and trying to unlock it after a while, screen doen's wake up. It just stays black and there is no reaction for power button. I have to reboot my phone by removing battery so that is really annoying. Stock was working fine, i hadn't notice anything like that. Anyone know the solution?
Click to expand...
Click to collapse
Violently press the button over and over. It worked for me.
Sent from my awfully named device.
RedLedLight said:
Violently press the button over and over. It worked for me.
Sent from my awfully named device.
Click to expand...
Click to collapse
I found another solution i think. I just set up minimal CPU freq. over 400mhz and it's working fine. At least under the charger. You have to press it every single time or once and it's working fine then?
E: Without charger the same issue. Not solved.
I have the same problem and I think it has something to do with the proximity sensor.
Sounds interesting. Why do you think so?
Btw. I don't know why but I am happy that I am not alone with this problem.
Because:
Proximity Wake-Up support – prevent accidental wake-up of device by checking to see if proximity sensor is blocked (eg. Device is in a bag or pocket).
Click to expand...
Click to collapse
I think, here is some XPM bug. Just my thought
lookynator said:
Because:
I think, here is some XPM bug. Just my thought
Click to expand...
Click to collapse
What do you think about checking older version of miui then? I mean v4 or something...
Mardrom said:
What do you think about checking older version of miui then? I mean v4 or something...
Click to expand...
Click to collapse
I've never tried.
lookynator said:
I have the same problem and I think it has something to do with the proximity sensor.
Click to expand...
Click to collapse
Hello, I have the same issue on SGS3 with CM11 M11 (M10 too). Have U found some solution for that ?
Dik

[Q] Touchscreen problem

Hi everyone,
TL;DR: I have an issue with the touchscreen of my Find 7 qhd (x9076), while on any other ROM than stock it my touchscreen glitches or something.
After installing a custom Rom, like PA, Dirty unicorns, CM, Nameless or any other available for this device (I believe I've tried all of them). The device works just like it should, nothing wrong with the touchscreen. But after like half a day, it starts to 'glitch'. Sensitivity is very low, when I press here it detects a press somewhere else.
I've got a temporary solution which is wiping the cache in recovery, then it works for a short period of time, but then it starts gliching again..
On stock rom the issue doesn't exists, but I realy do want to use a custom one.
Is anyone experiencing the same issue? Or maybe someone who has a solution?
Thanks in advance!
P.s every install is a full wipe, tried multiple recoveries, non-unified
I've read that the touchscreen fixes implemented by Oppo only work on ColorOS even though ROM makers have already implemented the fixes into the Roms. I'm not sure why, though
farenteria said:
I've read that the touchscreen fixes implemented by Oppo only work on ColorOS even though ROM makers have already implemented the fixes into the Roms. I'm not sure why, though
Click to expand...
Click to collapse
Hmm that's unfortunate, but it seems to me that I am one of a few people having trouble with this? Why don't other x9076 users have this problem?
B-vb said:
Hmm that's unfortunate, but it seems to me that I am one of a few people having trouble with this? Why don't other x9076 users have this problem?
Click to expand...
Click to collapse
Not sure. I personally have never had that problem
I want to bump this thread, i have this problem aswell and still it isnt fixed. anyone has a idea what to do about it ?
B-vb said:
Hi everyone,
TL;DR: I have an issue with the touchscreen of my Find 7 qhd (x9076), while on any other ROM than stock it my touchscreen glitches or something.
After installing a custom Rom, like PA, Dirty unicorns, CM, Nameless or any other available for this device (I believe I've tried all of them). The device works just like it should, nothing wrong with the touchscreen. But after like half a day, it starts to 'glitch'. Sensitivity is very low, when I press here it detects a press somewhere else.
I've got a temporary solution which is wiping the cache in recovery, then it works for a short period of time, but then it starts gliching again..
On stock rom the issue doesn't exists, but I realy do want to use a custom one.
Is anyone experiencing the same issue? Or maybe someone who has a solution?
Thanks in advance!
P.s every install is a full wipe, tried multiple recoveries, non-unified
Click to expand...
Click to collapse
Try to flash back stock recovery then flash COS 1.20 in systembase, then upgrade to COS 1.25, Then upgrade to 2.0 or above. Then flash custom recovery and rom again. This is the step you will not have problem in custom Rom. I am 100% sure.
Sent from my X9070 using XDA Free mobile app
I have the same problem, and I'm running Stock OS.
v2.1.4i Beta
This is how I bought the phone, interesting that it reads Beta...
I've updated to the latest firmware and still having touch screen sensitivity issues.
Someone has got too have some advise.... Oppoooooo.....
TouchScreen Auto Test - FAIL
I did the TouchScreen Auto Test and showed FAIL. Has anyone else shown this error?
Hi, I am having exactly same touch screen problem with custom roms, have tried both Omni and crDroid.
Is there a solution for this? I didn't have this problem in COS before.
What's the auto test?
I‘m on COS 2.1.5I and sensitivity works ok so far. I did have auto brightness problems but xposed and gravitybox has helped me adjust a lot of that out. Now it doesn‘t over dim in low light.
Auto test in COS is ok, I only had this problem in custom Roms, COS worked smoothly,so I reckon it's could be driver issue in custom Rom, maybe there are new fix for some panels are not included in custom Rom.
I never had any problems with touchscreen on find 7 until now. I have been extremely satisfied with this device until now. I have the find 7 9076.
There is a lengthy discussion of this touchscreen problem on the oppo forums.
My opinion is, it has nothing to do with the rom or firmware. It is a physical problem caused by heat. Once overheated, the digitizer gets somehow damaged.
I left my phone on a table in direct sunlight for hours while working on my lawnmower. I noticed it got very hot to touch. Ever since then my touchscreen has problems where there were no problems for 2 years prior. Dead spots, phantom touches and behaves sluggish in certain spots. Upper screen in portrait.
I tried wiping and reinstalling. Nothing works to fix this.
I even tried sealing it in a ziplock bag and freezing it. This actually works but its only temporary. The digitizer got damaged from heat. There is no "software" fix.
The only solution I can see is to physically replace the digitizer. This is a difficult thing to do but can be done.
I am considering replacing replacing the entire screen along with the digitizer as this is much easier but the problem is getting the high res replacement. Most after market screens are not equal to oppo's. The cost of OEM is too high.
Shame because this problem makes me now shy away from oppo devices.
Okay,
I opened up the phone.
Set to try and pry off/seperate the digitizer and replace with new one.
Decided to try something first.
Unplugged the digitizer and held power button (to release any stored up energy in the phone). Resnapped in digitizer cable to connector.
Reassembled the phone.
Put battery back in. Rebooted.
Sure enough, its all working. The full touchscreen is working with no dead spots or glitches.
For how long? Who knows?
Keeping this thing out of the heat.

[Q] Touch screen erratic after installing wrong pxz2

Hi. I installed the wrong version of PureXperiaZ2 rom, then after that, the touch screen became erratic. There are some points that work whenever I touch it, and on other parts, its reversed. I installed back the custom rom, then the right PXZ2 rom, but still, the touch screen is erratic. Is there any way to solve this problem? Thank you in advance.
When u use the stock rom was it okay?
ceasar47 said:
When u use the stock rom was it okay?
Click to expand...
Click to collapse
No sir. When i reverted back to stock rom, the touch screen was still unresponsive or erratic.
paliiits said:
No sir. When i reverted back to stock rom, the touch screen was still unresponsive or erratic.
Click to expand...
Click to collapse
Then it is your hardware provlem..... Consult u r service centre
ceasar47 said:
Then it is your hardware provlem..... Consult u r service centre
Click to expand...
Click to collapse
aw. the phone was never dropped. it just happened after installing the rom and rebooting. but i guess, i'll have to bring it to a technician. thanks for your replies anyway
paliiits said:
aw. the phone was never dropped. it just happened after installing the rom and rebooting. but i guess, i'll have to bring it to a technician. thanks for your replies anyway
Click to expand...
Click to collapse
Without dropping this can be happed for many other influences like got pressure in your pocket, etc....
Anyway go for sc.....
ssabaww said:
Hi. I installed the wrong version of PureXperiaZ2 rom, then after that, the touch screen became erratic. There are some points that work whenever I touch it, and on other parts, its reversed. I installed back the custom rom, then the right PXZ2 rom, but still, the touch screen is erratic. Is there any way to solve this problem? Thank you in advance.
Click to expand...
Click to collapse
i m having the same problem i booted with a wrong recovery.img
the service center says 6500 for replacing the touch screen
dont know willhave to put a duplicate one
a little different than what you expect!
if the Service centre guy finds it a touch issue then it is a hardware issue
as the recovery image is just for changing software or ROMS it can rarely affect a device touch .and it might be possible that you may not find a duplicate touch for the device !
I found dulpicate one after searching a lot they are changing it for 1500!!
Thanks for the reply
Sent from my GT-S6802 using XDA Free mobile app

Categories

Resources