No more development from me.
XDA:DevDB Information
TWRP for the Hauwei P10 Lite, Tool/Utility for the Huawei P10 Lite
Contributors
Meticulus
Source Code: http://github.com/Meticulus
Version Information
Status: Testing
Created 2017-12-05
Last Updated 2018-01-18
Good work!!
You guys ready for custom ROMs?
This is my WAS-LX3 Running my Pure AOSP for HI6250 Devices! Installation is a bit tricky but I'll fix that up soon!
Great work!
Just tested it on my P10 lite(was-lx1c432), and it works.
Thanks for your work. I haven't tried it yet. I'm waiting for your custom Rom.
With Devcheck system info (search in playstore) I saw that my device is compatible.
Hi, I flashed it on my WAS-LX1C432 but it freezes at the screen where it asks about allowing modifications to the system partition. The build from the other thread works though, apart from decryption.
Cannot wait to get aosp good work!!
Ra2rd said:
Cannot wait to get aosp good work!!
Click to expand...
Click to collapse
Stock decryption not working here either
I have not found any easy way to get back to stock...
When i tried to flash the zip with the other TWRP build, i got error 7 : This build is for Washington, not for Warsaw.
So, i flashed the img with fastboot and it works.
Also after allowing modifications at first boot of TWRP, i don't get that msg anymore.
With the other build i had to allow it everytime i booted TWRP.
I have WAS-LX1AC432
waaagh313ph4n7 said:
Hi, I flashed it on my WAS-LX1C432 but it freezes at the screen where it asks about allowing modifications to the system partition. The build from the other thread works though, apart from decryption.
Click to expand...
Click to collapse
Touch unresponssive happened to also. I've just rebooted into recovery again. Solved.
This build works like a charm
Encryption of data will be always a problem on kirin devices ...
[email protected]@[email protected] said:
When i tried to flash the zip with the other TWRP build, i got error 7 : This build is for Washington, not for Warsaw.
So, i flashed the img with fastboot and it works.
Also after allowing modifications at first boot of TWRP, i don't get that msg anymore.
With the other build i had to allow it everytime i booted TWRP.
I have WAS-LX1AC432
Click to expand...
Click to collapse
Washington? Which device is Washington?... Other twrp is port from Washington?
WAS-TL10C01B220 cmcc/cn is work.
Tnx
Meticulus said:
Washington? Which device is Washington?... Other twrp is port from Washington?
Click to expand...
Click to collapse
I forgot to make a pic. That's what i remember. Maybe I saw or did something wrong.
Edit :
Found this with Google
https://www.frequencycheck.com/models/Az88E/huawei-p10-lite-dual-sim-lte-was-lx3-huawei-washington
[email protected]@[email protected] said:
I forgot to make a pic. That's what i remember. Maybe I saw or did something wrong.
Edit :
Found this with Google
https://www.frequencycheck.com/models/Az88E/huawei-p10-lite-dual-sim-lte-was-lx3-huawei-washington
Click to expand...
Click to collapse
Oh geez I didn't know about Washington. I thought all P10 Lite was Warsaw...:silly:
Meticulus said:
Oh geez I didn't know about Washington. I thought all P10 Lite was Warsaw...:silly:
Click to expand...
Click to collapse
Me too.
With your twrp build I tried to flash the recovery again. The zip file. And this time I didn't get any errors.
How's the progress on your rom?
I would be happy to test it.
[email protected]@[email protected] said:
Me too.
With your twrp build I tried to flash the recovery again. The zip file. And this time I didn't get any errors.
How's the progress on your rom?
I would be happy to test it.
Click to expand...
Click to collapse
The ROM is pretty good. I'm just concerned about ppl being able to go back to stock. Because the ROM is not a daily driver yet..,
Rear cam video capture not working.
Little laggies happen during ui animation.
Edit: If you are confident you can get back to stock if you need to pm me.
Any Other Testers?
If there is anyone else who is confident they can get back to stock via the 'dload' method and would like to test AOSP for the P10 Lite, pm me.
Worked for me. I needed to do a full wipe in TWRP first. ( i wiped data too, dunno if it was needed)
Flashed open gapps 7.1 pico.
There is no browser or file manager included in the rom.
So after setting up playstore, download a file manager if you need to access your ext sdcard.
Flashed supersu in twrp and have root too.
---------- Post added at 06:42 PM ---------- Previous post was at 06:15 PM ----------
Restored my apps and data with titanium Backup.
Working fine.
Maybe create a new topic for this ROM?
I made a TWRP backup. Selected everything except /cache.
With 3 button dload method i was able to go back to stock rom.
Unlocked bootloader again, flashed TWRP and then tried to restore the backup.
Got a 255 error. So i did a full wipe and formatted /data.
After this succesfully restored the backup and phone booted normally with everything intact.
So, internal storage is not encrypted in TWRP.
Rom is pretty smooth. Didn't encouter any issues. Except the known bugs.
Finger print is working, GPS too.
Didn't test NFC or dual sim.
Will use this rom and see how it goes.
edit :
Made a "tap and pay" payment in the supermarket. So NFC is working.
[email protected]@[email protected] said:
Worked for me. I needed to do a full wipe in TWRP first. ( i wiped data too, dunno if it was needed)
Flashed open gapps 7.1 pico.
There is no browser or file manager included in the rom.
So after setting up playstore, download a file manager if you need to access your ext sdcard.
Flashed supersu in twrp and have root too.
---------- Post added at 06:42 PM ---------- Previous post was at 06:15 PM ----------
Restored my apps and data with titanium Backup.
Working fine.
Maybe create a new topic for this ROM?
Click to expand...
Click to collapse
I'll create new topic for this 2morrow...:highfive:
Related
translation with Google
[Basic information]
ROM Name: [HRT-Super_Lin] Huawei Mate8 full range EMUI5. 0_B580 Power smooth ROOT Lite
ROM Size: 932M
Adaptation version: Mate8 full range
Test models: Mate8 full series
Author : HRT-Super_Lin
[ROM details]
ROM based on official EMUI5. 0_B580 extract production, global odex merge
Add desktop 5X5 options, desktop long press slide, more settings, desktop layout, select
maintain the official complete style, optimize memory usage SuperSU rights management, For ROOT (Superuser)
To open the system update software, in the system / app / HwOUC. Bak Suffix for the apk
Zipalign optimization, reduce memory partition occupancy, add busybox, to facilitate the use of advanced users
delete address book Huawei customer service, to retain Huawei boot sound official Its weather components and system functional components
club.huawei.com
MT8-EMUI5.0-AL10_B580.zip
Mega Link comes later...
1. first must unlock the phone, and successfully brush into the Chinese TWRP Recovery, to ensure that the computer installed a good phone driver, download the recovery after decompression, the phone open USB debugging connected to the computer, double-click run. Bat start brushing, TWRP Recovery address Of TWRP):
MT8-EMUI5.0_TWRP.rar -> https://pan.baidu.com/s/1qXWrilm
2. Download ZIP format brush package, copied to the memory card, can be an external card can also be a built-in card, you can copy to the root directory, you can also copy to the subdirectory
3. Use the Recovery tool or in the shutdown state long press Volume 'button to enter the recovery interface. 4. After entering Recovery, click Clear Data to clear the data and return to the main interface. 5. Return to the main interface and select Install Brush Pack. The internal storage called: emmc, external storage called sdcard, click on the top of the UP A Level return to a directory) 'click Brush Pack' sliding brush into
6. Card brush is not necessary after the success of double-clear, otherwise it may lead to ROOT failure
ROM built several practical promotional software, if not, please use the re-file manager for unloading
statement: recently found someone steal my ROM to join the promotion without the test release, if found, please machine friends Report, please respect the author of labor results, forbidden based on the ROM for the second package, offenders must study
[ROM] Download
Huawei MATE8 entire network （NXT-AL10）：pan.baidu.com/s/1qXWrilm
Huawei MATE8 Telecom Edition （NXT-CL00）：pan.baidu.com/s/1c1FKBDI
Huawei MATE8 China Unicom （NXT-DL00）：pan.baidu.com/s/1pLRjMBp
Huawei MATE8 mobile version （NXT-TL00）：pan.baidu.com/s/1dFqWs85
hi
this new rom or this kang rom or what?
this for L29 or just for AL10?
i have L29 debranded to AL10 can i flash this rom over kangb577?
some info please about this rom
thanks
I have a L29C432 and am from C432B560 to Kang AL10 B580.
Hen Ry said:
I have a L29C432 and am from C432B560 to Kang AL10 B580.
Click to expand...
Click to collapse
is developer options working with you?
Can u load the link to Google or megalink for both twrp and b580 custom rom?
hamadazh said:
hi
this new rom or this kang rom or what?
this for L29 or just for AL10?
i have L29 debranded to AL10 can i flash this rom over kangb577?
some info please about this rom
thanks
Click to expand...
Click to collapse
I have L09C432B560 then I installed kangB577. I download the rom from the link and flash this rom over kangB577. This rom is similar to stock rom without gapp and with chinese apps. However the rom is rooted. There is no Kang settings in this rom.
https://mega.nz/#!IRc2Gb4Q!8NJyuJ3VC7wJpHM4EzvgYDwM9RJYeIzaOoZLM2nn8n0
Every thing went ok on L29C185 debrnded to DL00
Thanks great work.
Tried to flash this over a marshmallow rom by accident. Its stuck in "Booting Now" is there a way i can fix this? :/
BrownyDroid said:
Tried to flash this over a marshmallow rom by accident. Its stuck in "Booting Now" is there a way i can fix this? :/
Click to expand...
Click to collapse
You need to get into twrp, full wipe and restore or flash your previous rom.
[email protected] said:
You need to get into twrp, full wipe and restore or flash your previous rom.
Click to expand...
Click to collapse
I fixed it!
If anyone tries to flash from 6.0 to 7.0 and it wont boot, do what i did //
Use EMUI Recovery to grab the latest running version and let that install if you can, and then update it to EMUI 5.0 on AL10
Then install TWRP on 5.0 (I used 3.0.2.0) from this thread = https://forum.xda-developers.com/mate-8/general/twrp-3-0-2-0-mate-8-t3521215
After booting into TWRP on 7.0 the first thing i did was decrypt the data partition by going into Wipe -> Data -> Advanced and then changing it in the Change File System option from ext4 to ext2, and then back from 2 to 4.
It will take 20-30 mins to do going back to ext4, this is normal. then it is DONE
This allowed it to be wiped and decrypted for my AL10 model, otherwise you couldnt access the data partition properly. (And just wiping the data partition didnt work for some reason, not sure it just had errors.)
Then I flashed this rom and everything has gone smoothly since. Not a single worry at all in the world after that, no need to reflash any root privs or anything. Props to everyone for their software/firmwares respectively, I own none of this and am just saying how/what I did to get this working even after screwing it up.
If anyone accidentally flashes 7.0 over 6.0 and it wont boot, try this... ^^
EDIT - Changed, something I did didnt work the second time, fixed.
BrownyDroid said:
I fixed it!
If anyone tries to flash from 6.0 to 7.0 and it wont boot, do what i did //
Use EMUI Recovery to grab the latest running version and let that install if you can, and then update it to EMUI 5.0 on AL10
Then install TWRP on 5.0 (I used 3.0.2.0) from this thread = https://forum.xda-developers.com/mate-8/general/twrp-3-0-2-0-mate-8-t3521215
After booting into TWRP on 7.0 the first thing i did was decrypt the data partition by going into Wipe -> Data -> Advanced and then changing it in the Change File System option from 4 to 1, and then back from 1 to 4.
This allowed it to be wiped and decrypted for my AL10 model, otherwise you couldnt access the data partition properly. (And just wiping the data partition didnt work for some reason, not sure it just had errors.)
Then I flashed this rom and everything has gone smoothly since. Not a single worry at all in the world after that, no need to reflash any root privs or anything. Props to everyone for their software/firmwares respectively, I own none of this and am just saying how/what I did to get this working even after screwing it up.
If anyone accidentally flashes 7.0 over 6.0 and it wont boot, try this... ^^
Click to expand...
Click to collapse
Sorry but i don't understund, in whipe>data>change file system i have ext2, ext3, ext4, fat, exfat, f2fs. What i do? Thanks.
Inviato dal mio SM-N920F utilizzando Tapatalk
Some apps crash while navigating inside. Best example: Google Play Store, after clicking "read more" when showing app details. Other example: In Signal Messenger when entering a conversation.
I flashed Open Gapps Pico version.
Any suggestions?
[email protected] said:
You need to get into twrp, full wipe and restore or flash your previous rom.
Click to expand...
Click to collapse
entonjackson said:
Some apps crash while navigating inside. Best example: Google Play Store, after clicking "read more" when showing app details. Other example: In Signal Messenger when entering a conversation.
I flashed Open Gapps Pico version.
Any suggestions?
Click to expand...
Click to collapse
I never flashed Gapps, i went into HiApp and installed the play store through there and then updated it, worked perfectly.
After i reinstalled the rom because of some errors with the camera i was getting i ended up having some problems with google play services but I just downloaded the latest online and installed it, been smooth since.
AND i can confirm, im not getting and "read more" crashes or Messenger crashes whatsoever. Sorry to hear about your problem! If it keeps happening try backing up data, reflashing the rom or flash stock first then reflash it and try installing google play store through HiApp.
I have a NXT-DL00 with a custom rom , rooted,TWRP etc... can I install your NXT-AL10 version?
batman74 said:
Sorry but i don't understund, in whipe>data>change file system i have ext2, ext3, ext4, fat, exfat, f2fs. What i do? Thanks.
Inviato dal mio SM-N920F utilizzando Tapatalk
Click to expand...
Click to collapse
Sorry! Updated.
I went and changed it from ext4 to ext2 which took only less than 1 min, and then from ext2 to ext4 which took about half an hour.
Then it worked!
(Sorry for the confusion)
---------- Post added at 09:31 AM ---------- Previous post was at 09:28 AM ----------
stratanic said:
I have a NXT-DL00 with a custom rom , rooted,TWRP etc... can I install your NXT-AL10 version?
Click to expand...
Click to collapse
If you try anyways, make sure you make a backup of your current rom before flashing and tell us what you did/results.
If its on a 6.0 rom you can follow the mini guide I had written, get yourself into EMUI 5.0 before you flash it. either by the official updater if you can by Restoring through the EMUI recovery back to stock and updating, or flashing an EMUI 5 rom and getting 3.0.2-0 twrp on there first.
Update : Been running this rom on EMUI 5.0 since release and it is super stable and amazing to run.
Been the best rom ive had on my Mate 8, definitely deserves some more attention. My battery life is about 15-25% better than emui 4.x and the phone doesnt have wakelock and app sleep problems for me at all compared to previous roms ive used.
We just need this rom with Kang VIP and it would be 110% sweet!
Waiting for a release of Xposed to come out so i can test and report back.
ive seen some users installing this rom over the latest kangvip, that way one has best of both worlds
Sent from my Huawei Mate 8 NXT-AL10
jbmc83 said:
ive seen some users installing this rom over the latest kangvip, that way one has best of both worlds
Sent from my Huawei Mate 8 NXT-AL10
Click to expand...
Click to collapse
Hi jbmc....how to do? You mean flash kang and then dirty flash HRT? How will have both functionalities?
Also, in OP it is not clear what to wipe and what not to...
"Card brush is not necessary after the success of double-clear, otherwise it may lead to ROOT failure"....what this means exactly?
There is a new hrt b584 version available , I saw it available on the Chinese website but don't have baidu
TWRp-3.0.2-for Honor3c(H30-U10) by Syed Hassan
Download Links:
https://www.androidfilehost.com/?fid=817550096634748025
Material Themed Twrp 3.0.2-H30-U10
https://www.androidfilehost.com/?fid=673368273298933336
My Friend awesomely Themed Twrp Thanks @draculla444
Click to expand...
Click to collapse
Installation Instructions
Got To Old Twrp Recovery and flash that zip and reboot:
Dine!
Click to expand...
Click to collapse
Dont Forget to hit Thanks Button if you Like and Support My work
XDA:DevDB Information
TWRP-3.0.2-For -H30-U10-by-Syed Hassan, ROM for the Honor 3C
Contributors
hassanjavaid8181, hassanjavaid8181
ROM OS Version: 2.3.x Gingerbread
Version Information
Status: Testing
Created 2017-02-21
Last Updated 2017-02-22
ScreenShots:
going to try this! thanks dude, finally we had higher version XD
Thats Awesome Work Hassan Bro Keep it your good work Honor 3c user are feeling awesome because of you
Material Themed Twrp Link Added:
And Thanks Guys For Appreciation..
it works, using it to backup current rom but TWRP 3.0.2 create another folder , so previos backup doesn't show. moving to new folder will make TWRP 3.0.2 can read the old backup
TWRP 3.0.2 create /TWRP/BACKUPS/000000000000 (do not count how much 0 )
old twrp create /TWRP/BACKUPS/H30-U10
how to restore ? already mount all , or leaving the system uncheck but it only restore boot partition
I'm using material one
aries77 said:
it works, using it to backup current rom but TWRP 3.0.2 create another folder , so previos backup doesn't show. moving to new folder will make TWRP 3.0.2 can read the old backup
TWRP 3.0.2 create /TWRP/BACKUPS/000000000000 (do not count how much 0 )
old twrp create /TWRP/BACKUPS/H30-U10
how to restore ? already mount all , or leaving the system uncheck but it only restore boot partition
I'm using material one
Click to expand...
Click to collapse
yes it makes another folder unlike old twrp,,i restore backup from old twrp and it was working fine
just make backup with this twrp of just boot or nvram partition when it done
connect your phone with pc got to backup folder you just made delete that file
copy your old backup to that folder
select partition which you want to restore done:good:
Touch issue
Installed this recovery but it causes touch problem in recovery.
Any solution?
Tested this latest version. Everything OK, except it can't flash ”boot.img" file like TWRP 2.8.6.0 does.
it causes touch problem
twrp error
in my honor 3c twrp reading internal memory 0mb so unable to flash anything
have tried cwm recovery,wiping data cache etc nothing worked
what should i do now?:crying::crying:
tifa0202 said:
in my honor 3c twrp reading internal memory 0mb so unable to flash anything
have tried cwm recovery,wiping data cache etc nothing worked
what should i do now?:crying::crying:
Click to expand...
Click to collapse
Is it mounted before you try?
tifa0202 said:
in my honor 3c twrp reading internal memory 0mb so unable to flash anything
have tried cwm recovery,wiping data cache etc nothing worked
what should i do now?:crying::crying:
Click to expand...
Click to collapse
Can u factory reset with stock recovery?
gopinaidu77 said:
Can u factory reset with stock recovery?
Click to expand...
Click to collapse
Yes it's possible.
adriansticoid said:
Yes it's possible.
Click to expand...
Click to collapse
Lets see
How did you Get TWRP on your phone, i saw the list and it is not supported
hassanjavaid8181 said:
ScreenShots:
Click to expand...
Click to collapse
Hey brother I am completely new to this whole thing and just wanted to know how to get TWRP on the Honor 3c as i saw the compatibility list and it was not there, thanks in advance man
---------- Post added at 07:28 PM ---------- Previous post was at 07:21 PM ----------
Xedra1 said:
Hey brother I am completely new to this whole thing and just wanted to know how to get TWRP on the Honor 3c as i saw the compatibility list and it was not there, thanks in advance man
Click to expand...
Click to collapse
I am very new to this and dont know anything , any help will be much appreciated
Xedra1 said:
Hey brother I am completely new to this whole thing and just wanted to know how to get TWRP on the Honor 3c as i saw the compatibility list and it was not there, thanks in advance man
---------- Post added at 07:28 PM ---------- Previous post was at 07:21 PM ----------
I am very new to this and dont know anything , any help will be much appreciated
Click to expand...
Click to collapse
What do you mean it's not there?
tifa0202 said:
in my honor 3c twrp reading internal memory 0mb so unable to flash anything
have tried cwm recovery,wiping data cache etc nothing worked
what should i do now?:crying::crying:
Click to expand...
Click to collapse
newupdate is available try that one.
Xedra1 said:
Hey brother I am completely new to this whole thing and just wanted to know how to get TWRP on the Honor 3c as i saw the compatibility list and it was not there, thanks in advance man
---------- Post added at 07:28 PM ---------- Previous post was at 07:21 PM ----------
I am very new to this and dont know anything , any help will be much appreciated
Click to expand...
Click to collapse
Which list?
which twrp is better tis one or 2.8.6?
I recently flashed Resurrection Remix standard Nougat Edition with the latest version of open gapps, nothing else. I then proceeded to make a backup with TWRP as IMO its always good to have a backup at this fresh working condition. This is the issue going into TWRP and choosing backup and swiping to start the backup i get the error "unable to mount storage" and the backup fails.
I am able to access files via MTP with windows but for some reason TWRP isn't working.
I am afraid to do anything at the moment as without a means to backup or restore via backup i'm afraid of bricking my device. Since i've owned my 1+3 I've always just stayed stock with magisk but i thought hey why not have fun right so I decided to check out Resurrection Remix and I it but I don't like not being able to create backups or really even use TWRP. My first thought would to Re-Flash TWRP but as i said without some more knowledge I don't want to try anything.
Thank you in advance for reading my post and thank you a thousand times if you can help me out. If you need information or any sort of logs please ask.
lebeatnik said:
I recently flashed Resurrection Remix standard Nougat Edition with the latest version of open gapps, nothing else. I then proceeded to make a backup with TWRP as IMO its always good to have a backup at this fresh working condition. This is the issue going into TWRP and choosing backup and swiping to start the backup i get the error "unable to mount storage" and the backup fails.
I am able to access files via MTP with windows but for some reason TWRP isn't working.
I am afraid to do anything at the moment as without a means to backup or restore via backup i'm afraid of bricking my device. Since i've owned my 1+3 I've always just stayed stock with magisk but i thought hey why not have fun right so I decided to check out Resurrection Remix and I it but I don't like not being able to create backups or really even use TWRP. My first thought would to Re-Flash TWRP but as i said without some more knowledge I don't want to try anything.
Thank you in advance for reading my post and thank you a thousand times if you can help me out. If you need information or any sort of logs please ask.
Click to expand...
Click to collapse
I am tired of repeating this.
I think that you are on the official version of TWRP which is good if your ROM is OOS. But when shifting to custom ROMs, it is a good idea to flash eng.stk's TWRP.
The official TWRP will not work with custom ROMs.
The official TWRP will not work with custom ROMs.
???!!!
I'm with official twrp 3.1.1.2 , flashing custom ROMs and using them , till today, no problem. I think his data encrypted so twrp not showing storage.
I am on the official version of TWRP I have not read anywhere about that issue, so if I flash eng.stk's TWRP it should work? Sorry your tired of repeating it but it's not on the ROMs thread so idk where I would have gotten that info, but thanks
drmuruga said:
The official TWRP will not work with custom ROMs.
???!!!
I'm with official twrp 3.1.1.2 , flashing custom ROMs and using them , till today, no problem. I think his data encrypted so twrp not showing storage.
Click to expand...
Click to collapse
May be I shouldn't have been that categorical, but for many, the issue is there. Glad that it works for you.
---------- Post added at 05:27 PM ---------- Previous post was at 05:25 PM ----------
lebeatnik said:
I am on the official version of TWRP I have not read anywhere about that issue, so if I flash eng.stk's TWRP it should work? Sorry your tired of repeating it but it's not on the ROMs thread so idk where I would have gotten that info, but thanks
Click to expand...
Click to collapse
Why don't you try? You are not going to lose anything.
Also take into account the post above yours regarding encryption.
It worked, for some reason official TWRP would not unlock after I entered the encryption code, blue spark TWRP works, thanks, this is probably what I would have tried but it's nice to have gotten some info on the issue before I went flashing things Willie nillie
After you flash your files in TWRP, then select reboot, and reboot back into TWRP
I just found out today that actually lg v30 can support miui 10 by using treble.
If anyone interested please take a look at how to flash treble and vendor partition by @SGCMarkus thumb up for him
This thread is created for people who are not sure what is treble supported.
You can find ton of diffrent port rom.
Follow his guide
https://forum.xda-developers.com/lg-v30/how-to/guide-how-to-repartition-vendor-how-to-t3789787
Attach screen shot is prove I flash it to my lg v30 and working well with lte yes wifi yes Bluetooth yes everything.
After you done repartition go to this link you can find tons of rom there
https://forum.xda-developers.com/project-treble/trebleenabled-device-development
Edit : the info at my screenshot write snapdragon 6++ is just for display but I'm still running 835
@Saxithon comments ? has anything changed meanwhile ?
What is still broken ?
zacharias.maladroit said:
@Saxithon comments ? has anything changed meanwhile ?
What is still broken ?
Click to expand...
Click to collapse
As what I notice only when sliding the brightness the screen flicker and read mode/night mode is unuseable
darkidz555 said:
As what I notice only when sliding the brightness the screen flicker and read mode/night mode is unuseable
Click to expand...
Click to collapse
So it's still there, thx for that,
there supposedly there were also issues with sound and other bits I can't currently remember,
thus asking Saxithon who wrote about that before
miui10
good find man im running its nice.
They got some fix about brightness slider and sound crackling in their telegram group and they posted h2os rom as well join their telegram group and they currently port Samsung TouchWiz from note 8.
Have a look
darkidz555 said:
I just found out today that actually lg v30 can support miui 10 by using treble.
If anyone interested please take a look at how to flash treble and vendor partition by @SGCMarkus thumb up for him
This thread is created for people who are not sure what is treble supported.
You can find ton of diffrent port rom.
Follow his guide
https://forum.xda-developers.com/lg-v30/how-to/guide-how-to-repartition-vendor-how-to-t3789787
Attach screen shot is prove I flash it to my lg v30 and working well with lte yes wifi yes Bluetooth yes everything.
After you done repartition go to this link you can find tons of rom there
https://forum.xda-developers.com/project-treble/trebleenabled-device-development
Edit : the info at my screenshot write snapdragon 6++ is just for display but I'm still running 835
Click to expand...
Click to collapse
I'm trying this tonight.. I finally was able to create a working vendor partition with a flashable zip.. The guide refuse to work for me.. I tried everything from every page in the repartition thread.. I kept getting error 7 failed to mount system.. I'll share to people struggling with the PC method.. The zip can add or remove vendor partition from twrp.. It ask if you want to use system or data partition to create vendor.. And you can make it 512mb or 800mb.. I used data partition to create and 800mb just in case and it worked.. System failed to mount and install anything, every time from the repartition thread .. Or if I chose to repartition System in twrp zip, system failed to mount installing anything.. Thanks for sharing.. I appreciate you and others hard work.. I'm experimenting with easier methods of going from stock to GSI without PC..
lowkeyst4tus said:
I'm trying this tonight.. I finally was able to create a working vendor partition with a flashable zip.. The guide refuse to work for me.. I tried everything from every page in the repartition thread.. I kept getting error 7 failed to mount system.. I'll share to people struggling with the PC method.. The zip can add or remove vendor partition from twrp.. It ask if you want to use system or data partition to create vendor.. And you can make it 512mb or 800mb.. I used data partition to create and 800mb just in case and it worked.. System failed to mount and install anything, every time from the repartition thread .. Or if I chose to repartition System in twrp zip, system failed to mount installing anything.. Thanks for sharing.. I appreciate you and others hard work.. I'm experimenting with easier methods of going from stock to GSI without PC..
Click to expand...
Click to collapse
I had the same issues. Ended up having to lgup back to stock and root. Do you mind sharing where you found script or did yoi create it?
Who-Lep said:
I had the same issues. Ended up having to lgup back to stock and root. Do you mind sharing where you found script or did yoi create it?
Click to expand...
Click to collapse
Yes I'll share link.. I didn't create it.. I message the creator to get us a version that strictly repartition data.. I lost count how many times I started over trying to get a working vendor partition.. It's universal also.. Arm and arm64 only.. Read instructions before flashing.. https://forum.xda-developers.com/axon-7/development/tool-party-v0-1-vendor-partition-t3831517
good news. I wait for someone good to cook the Rom for good. maybe flash with twrp
lowkeyst4tus said:
Yes I'll share link.. I didn't create it.. I message the creator to get us a version that strictly repartition data.. I lost count how many times I started over trying to get a working vendor partition.. It's universal also.. Arm and arm64 only.. Read instructions before flashing.. https://forum.xda-developers.com/axon-7/development/tool-party-v0-1-vendor-partition-t3831517
Click to expand...
Click to collapse
Cool, thank you!
Edit: did you need to install the treble twrp?
Who-Lep said:
Cool, thank you!
Edit: did you need to install the treble twrp?
Click to expand...
Click to collapse
No.. Not to install.. But to use and format vendor you do.. I flashed a treble ROM last nite and it flashed perfectly.. The issue I had was with all the options it needs to be in front or behind system or vendor partition.. It ask you where to put it.. I got a 3rd option picking the wrong location for vendor.. Don't pick it! Use hardware keys to start over.. Even though it will mount and flash.. Twrp need it to be in front or behind system or data partition to boot.. It kept booting back to recovery for me.. Then when I try flashing party to remove vendor, I got a message that since vendor in the wrong location twrp can't reverse the process.. The only way to reverse it is with kdz or manually restoring gpt with repartition thread restore method.. I used that method to manually create the gpt backup..
lowkeyst4tus said:
No.. Not to install.. But to use and format vendor you do.. I flashed a treble ROM last nite and it flashed perfectly.. The issue I had was with all the options it needs to be in front or behind system or vendor partition.. It ask you where to put it.. I got a 3rd option picking the wrong location for vendor.. Don't pick it! Use hardware keys to start over.. Even though it will mount and flash.. Twrp need it to be in front or behind system or data partition to boot.. It kept booting back to recovery for me.. Then when I try flashing party to remove vendor, I got a message that since vendor in the wrong location twrp can't reverse the process.. The only way to reverse it is with kdz or manually restoring gpt with repartition thread restore method.. I used that method to manually create the gpt backup..
Click to expand...
Click to collapse
Thanks again, I will try tonight and said you used data partition?
Who-Lep said:
Thanks again, I will try tonight and said you used data partition?
Click to expand...
Click to collapse
Correct.. I made it 800mb.. It will ask if you want 512mb or 800mb..
---------- Post added at 10:32 PM ---------- Previous post was at 09:53 PM ----------
Who-Lep said:
Thanks again, I will try tonight and said you used data partition?
Click to expand...
Click to collapse
Make sure to flash compatible treble ROM before GSI.. I dont want to find out what happens if I flash GSI without treble ROM.. I've had several softbricks with other stuff..
lowkeyst4tus said:
Correct.. I made it 800mb.. It will ask if you want 512mb or 800mb..
---------- Post added at 10:32 PM ---------- Previous post was at 09:53 PM ----------
Make sure to flash compatible treble ROM before GSI.. I dont want to find out what happens if I flash GSI without treble ROM.. I've had several softbricks with other stuff..
Click to expand...
Click to collapse
Same here, thanks for the heads up. I think the only available treble rom would be the Los 15.1.
I'm looking to install Miui. Did you get the rom from the link that you posted?
What camera app are you using?
Installed a gsi rom on Ls998 (LG V30+) converted to us998, created vendor partion, flashed treble twrp, flashed trebelized Los 15.1. went over to the GSI rom section of link provided on first page, chose the rom I wanted (Pixel dust pie), extracted the .Img from xz, flashed the .Img successfully and booted, got a couple UI crashes and rebooted, it wouldn't boot after that, tried several times to boot into GSI but it just hung at the boot animation. Is this normal? (I've since then went into twrp and flashed trebelized Los again)
Before I want to say big thank you to Nankun for porting miui 11 for v30 and also another big thank you to Xiao Vic for maintenance and sharing the rom.
Also thanks to Hendavi for testing on the T-Mobile h932 to figure a way to make this time work on it
Warning: I am not responsible for any damage cause. Read instructions carefully before. I am not the creator of this rom, neither the maintainer. I am just sharing for our passion.
IMPORTANT: VENDOR PARTITION NEEDED BEFORE FLASHING!
Make sure you have VENDOR PARTITION on your device before flashing the rom or else you will get boot loop or brick. You can check the forum for how to enable vendor partition or treble on your device.
Don't flash gapps or else it will break setup. If you want Google applications, use the old method of installing gapps on miui by searching and downloading gapps installer apk file from xiaomi forum or anywhere else to get play store, contact sync and other Google services.
If you are facing bootloaps or brick after installation even when you have vendor partition, just reboot to twrp and make factory reset and reboot again.
It won't boot if you're on stock oreo, since the rom needs pie files to work properly. Make sure you're coming from stock pie rom or have once update to stock pie before installing any AOSP rom as current rom. If you're coming from AOSP pie or Android 10, make back up and flash rom after vendor partition is created.
The rom will boot on all v30 series except for Canada H933 only. If you have this H933 version, you need to convert to US998 before trying r else you will get hard brick.
Those on T-Mobile H932 should do these things. First you will need to boot the miui 10 first, by downloading the miui 10 backup zip file from the main download link and download the file miui 8.22 file and unzip it. After unzipping, place the file in the backup folder under twrp folder in the SD, then restore in twrp recovery and reboot. After rebooting, you can enjoy the miui 10 which works fully for T-Mobile h932 or if you want to update to miui 11, just download the second backup file from the link with T-Mobile H932 only, and follow the same process to restore the files then reboot. But please make sure you still have the vendor partition first before trying any of this.
INSTRUCTIONS
1. Download the rom and places it on your device sd.
2. Reboot to twrp and make back up of your current rom if incase anything, then you restore back.
3. Wipe system, data, vendor, caches then go back to flash rom zip.
4. Reboot to system then enjoy.
Bugs.
HiFi dac don't work. And NFC also don't work. Also double touch to wake don't work for now.
Aside portrait mode of xiaomi camera don't work and it will break the cam app.
Aside these everything works smoothly and stable.
Download Rom
https://jxjjxy-my.sharepoint.com/:f...9LkEhTgcSMfWYBaX3nttEhBOviTHnuQ5jZog?e=ADbORQ
T-Mobile H932 only( just unzip and restore as backup file)
https://drive.google.com/file/d/19pIBMb2W6HJ9PFcj31UVkrEXsFM-CP_C/view?usp=drive_open
Gapps installer
https://mega.nz/#!L89jQCYA!B1N4akqsDN4w4QIKYtaKWKVC8rjLDx25f0vPTZY_9fE
Vendor Partition zip file.
https://mega.nz/#!G9lQWSjL!m1U4b4DA2nXEa7VEQyG_peZfJiPd11vTl0hoFqnINFo
Use this file for creating vendor Partition by flash in twrp.
Make backup first before flashing.
Flash zip, go to wipe and advance, select resize partition, then select vendor, choose where you want to create the vendor partition from( system recommend, and also the size should be 512 and above)
After creating the vendor partition, reboot recovery and format system, vendor and caches. Now you can flash rom.
Good afternoon and thank you for sharing this with us. I have two questions for you. I followed your instructions and regarding to wiping vendor, my phone doesn't allow it to be wiped. Also when I tried to install the rom, I was receiving no os installed when trying to reboot my phone. I redownloaded the rom and and transferred to zip card in hoping that will make a difference in install. Is there a way to bypass vendor wipe or is that needed? Thank you again for adding Miui and many thanks for the porting. I have loved MIUI as long as I had android.
mcarden2006 said:
Good afternoon and thank you for sharing this with us. I have two questions for you. I followed your instructions and regarding to wiping vendor, my phone doesn't allow it to be wiped. Also when I tried to install the rom, I was receiving no os installed when trying to reboot my phone. I redownloaded the rom and and transferred to zip card in hoping that will make a difference in install. Is there a way to bypass vendor wipe or is that needed? Thank you again for adding Miui and many thanks for the porting. I have loved MIUI as long as I had android.
Click to expand...
Click to collapse
You can't wipe vendor because you don't have the partition. Download the partition file from the below link and flash via twrp. After that, go to wipe, Advance, resize partition, the select vendor and then create a vendor part. You can either create it from the data partition or system partition but I recommend system. The size should be from 512 above not below. After creating the partition, go back to wipe and then wipe system, vendor and caches, then you can now flash the rom.
File link below ?
https://mega.nz/#!G9lQWSjL!m1U4b4DA2nXEa7VEQyG_peZfJiPd11vTl0hoFqnINFo
Any screenshots? Original lg camera works? Based on aosp or stock?
lic3ns3d said:
Any screenshots? Original lg camera works? Based on aosp or stock?
Click to expand...
Click to collapse
I haven't try lg camera but Gcam works perfectly well.
lic3ns3d said:
Any screenshots? Original lg camera works? Based on aosp or stock?
Click to expand...
Click to collapse
It's a ported rom but it contains stock pie blobs
Awesome. I will try it now.
Got some good news, more good news, great news, and some bad news. The good news is with the zip file provided it installed perfectly. The more good news is the setup was easy. The great news is the camera worked perfectly portrait and landscape. The bad news is trying to figure out how to change everything to English. One thing I discovered is do not install gapps stock with the ROM. It will crash it or it did with me. Awesome port and thank you.
mcarden2006 said:
Got some good news, more good news, great news, and some bad news. The good news is with the zip file provided it installed perfectly. The more good news is the setup was easy. The great news is the camera worked perfectly portrait and landscape. The bad news is trying to figure out how to change everything to English. One thing I discovered is do not install gapps stock with the ROM. It will crash it or it did with me. Awesome port and thank you.
Click to expand...
Click to collapse
Why are you flashing gapps? I don't see anything in the instructions about doing that.
Sent from my LG-US998 using Tapatalk
Very very nice, hope will be future update
---------- Post added at 07:23 AM ---------- Previous post was at 07:22 AM ----------
Btw what firmware? Pie or oreo?
kenbo111 said:
Why are you flashing gapps? I don't see anything in the instructions about doing that.
Sent from my LG-US998 using Tapatalk
Click to expand...
Click to collapse
I tried to flash gapps to get google working for syncing purposes and install some of my favorite apps. I tried the local miui app store to download the playstore but the server is extremely slow in my area. About 2 hours and the rom was still downloading the updates prior to installing the selected apps. The rom itself is extremely smooth and running the way MIUI is expected to run without a glitch. I am just wondering if the miui store is downloading using my cellular data instead of my 400M internet.
Start point Stock Oreo Or Stock Pie ¡????
Amosika said:
You can't wipe vendor because you don't have the partition. Download the partition file from the below link and flash via twrp. After that, go to wipe, Advance, resize partition, the select vendor and then create a vendor part. You can either create it from the data partition or system partition but I recommend system. The size should be from 512 above not below. After creating the partition, go back to wipe and then wipe system, vendor and caches, then you can now flash the rom.
File link below
https://mega.nz/#!G9lQWSjL!m1U4b4DA2nXEa7VEQyG_peZfJiPd11vTl0hoFqnINFo[/QUOTE
Start point Stock Oreo Or Stock Pie ¡????
What is the TWRP Recommendad for flash this rom ?
---------- Post added at 05:21 AM ---------- Previous post was at 05:04 AM ----------
Amosika said:
It's a ported rom but it contains stock pie blobs
Click to expand...
Click to collapse
I´m stuck in Mi logo
---------- Post added at 05:21 AM ---------- Previous post was at 05:21 AM ----------
Amosika said:
It's a ported rom but it contains stock pie blobs
Click to expand...
Click to collapse
I´m stuck in Mi logo
Click to expand...
Click to collapse
Imam mustofa said:
Very very nice, hope will be future update
---------- Post added at 07:23 AM ---------- Previous post was at 07:22 AM ----------
Btw what firmware? Pie or oreo?
Click to expand...
Click to collapse
its pie, and there are updates but not weekly
Yeriorlando said:
Amosika said:
You can't wipe vendor because you don't have the partition. Download the partition file from the below link and flash via twrp. After that, go to wipe, Advance, resize partition, the select vendor and then create a vendor part. You can either create it from the data partition or system partition but I recommend system. The size should be from 512 above not below. After creating the partition, go back to wipe and then wipe system, vendor and caches, then you can now flash the rom.
File link below
https://mega.nz/#!G9lQWSjL!m1U4b4DA2nXEa7VEQyG_peZfJiPd11vTl0hoFqnINFo[/QUOTE
Start point Stock Oreo Or Stock Pie ¡????
What is the TWRP Recommendad for flash this rom ?
---------- Post added at 05:21 AM ---------- Previous post was at 05:04 AM ----------
I´m stuck in Mi logo
---------- Post added at 05:21 AM ---------- Previous post was at 05:21 AM ----------
I´m stuck in Mi logo
Click to expand...
Click to collapse
did you create the vendor to enable treble on your phone? if not the enable vendor on your phone else it wont boot
Click to expand...
Click to collapse
Yeriorlando said:
Amosika said:
You can't wipe vendor because you don't have the partition. Download the partition file from the below link and flash via twrp. After that, go to wipe, Advance, resize partition, the select vendor and then create a vendor part. You can either create it from the data partition or system partition but I recommend system. The size should be from 512 above not below. After creating the partition, go back to wipe and then wipe system, vendor and caches, then you can now flash the rom.
File link below
https://mega.nz/#!G9lQWSjL!m1U4b4DA2nXEa7VEQyG_peZfJiPd11vTl0hoFqnINFo[/QUOTE
Start point Stock Oreo Or Stock Pie ¡????
What is the TWRP Recommendad for flash this rom ?
---------- Post added at 05:21 AM ---------- Previous post was at 05:04 AM ----------
I´m stuck in Mi logo
---------- Post added at 05:21 AM ---------- Previous post was at 05:21 AM ----------
I´m stuck in Mi logo
Click to expand...
Click to collapse
you must be on stock pie, if stuck go back to twrp and do factory reset then boot again
Click to expand...
Click to collapse
If you in pie and not having vendor partition, well you need flash oreo twrp(v3.2.x.x) then go ahead for vendor installation, link = https://mega.nz/#!G9lQWSjL!m1U4b4DA2nXEa7VEQyG_peZfJiPd11vTl0hoFqnINFo
And than flash pie twrp(v3.3.x.x) reboot recovery and go ahead for Miui Rom
Btw DT2WA doesn't work, also Chinese bloatware js here, very smoth rom
Imam mustofa said:
If you in pie and not having vendor partition, well you need flash oreo twrp(v3.2.x.x) then go ahead for vendor installation, link = https://mega.nz/#!G9lQWSjL!m1U4b4DA2nXEa7VEQyG_peZfJiPd11vTl0hoFqnINFo
And than flash pie twrp(v3.3.x.x) reboot recovery and go ahead for Miui Rom
Btw DT2WA doesn't work, also Chinese bloatware js here, very smoth rom
Click to expand...
Click to collapse
He will fix DT2WA in the next update and also add always on, he said it drivers issue and he forgot to fix that. Also he is planning on porting global version for global users so let's stay tuned. I will share the next update when it is ready.
Amosika said:
He will fix DT2WA in the next update and also add always on, he said it drivers issue and he forgot to fix that. Also he is planning on porting global version for global users so let's stay tuned. I will share the next update when it is ready.
Click to expand...
Click to collapse
Also there's no gapps or play store
Imam mustofa said:
Also there's no gapps or play store
Click to expand...
Click to collapse
You have to use the old method of installing gapps on the miui Chinese rom. Use miui gapps installer apk which you can Google for it. It's works and you will get all your contacts and things back from Google play store.
Yeriorlando said:
Amosika said:
You can't wipe vendor because you don't have the partition. Download the partition file from the below link and flash via twrp. After that, go to wipe, Advance, resize partition, the select vendor and then create a vendor part. You can either create it from the data partition or system partition but I recommend system. The size should be from 512 above not below. After creating the partition, go back to wipe and then wipe system, vendor and caches, then you can now flash the rom.
File link below
https://mega.nz/#!G9lQWSjL!m1U4b4DA2nXEa7VEQyG_peZfJiPd11vTl0hoFqnINFo[/QUOTE
Start point Stock Oreo Or Stock Pie ¡????
What is the TWRP Recommendad for flash this rom ?
---------- Post added at 05:21 AM ---------- Previous post was at 05:04 AM ----------
I´m stuck in Mi logo
---------- Post added at 05:21 AM ---------- Previous post was at 05:21 AM ----------
I´m stuck in Mi logo
Click to expand...
Click to collapse
I was able to get mine fixed by format data, then wipe everything, and reboot recovery before installing miui 11. Everything works beautifully.
Click to expand...
Click to collapse