Develop Bugs

[HOWTO] Create a GoldCard - Bypassing the RUU/SPL CID check to Root/Downgrade

If you are stuck on a ROM you don't like (t-mobile/asian carrier etc.) you can use this howto to create a goldcard to bypass the CID checks so you can downgrade and root your Hero.
01. Download QMAT 5.06 here
It’s a demo version so will only run for 10 minutes.
02. Format your SD card to FAT32. Please keep in mind some brands of SD cards do not work.
03. Use adb to run this command: adb shell cat /sys/class/mmc_host/mmc1/mmc1:*/cid
04. Copy the SD card cid code displayed after the adb command.
05. Start Qmat and Click on Cyptoanalysis Tools > Crypto Toolbox.
06. Look at the bottom, there is a text box (beside the “Reverse String” button) enter the SD card cid code you got earlier.
Click on the “Reverse String” button, the result is reversed…
Example: 532600bd227d9c0347329407514d5402
07. Copy the reversed SD card cid code.
08. Go to QMAT goldcard site here to generate your goldcard (yes it says for G1 but works for our Hero too).
09. Enter your email. For the correct SD card cid code, you need to replace the first 2 characters to 00.
Example: From “532600bd227d9c0347329407514d5402” to “002600bd227d9c0347329407514d5402”
10. Click Continue and you will receive the goldcard.img in .zip format in your email.
11. Go to your email, download the zip file and save it to a directory and unzip it to goldcard.img
12. Download HxD Hex Editor from here
13. Install and launch HxD Hex Editor program. (make sure you use "Run as Administrator" under Vista and win 7)
14. Go to Extra tab > Open Disk. Under Physical disk, select Removable Disk (Must be your SD card), uncheck “Open as Readonly), click OK.
15. Go to Extra again, Open Disk Image, open up goldcard.img which you’ve saved/unzipped earlier.
Now, you should have two tabs, one is your removable disk, the other is goldcard.img. Press OK when prompted for “Sector Size” 512 (Hard disks/Floppy disks), click OK.
16. Click on goldcard.img tab. Go to Edit tab > Select All, edit tab again > copy.
17. Click on the “removable disk” tab. Select offset 00000000 till offset 00000170 (including the 00000170 line), click on Edit tab and then Paste Write.
18. Click on File > Save. now you can exit the program.
19. Reboot your phone with this SD Card (now GoldCard) inside
20. Use the Official HTC RUU to downgrade to 2.73.405.5 (which you can get here) from which you can fastboot boot and/or root your phone with flashrec.
Done.
Credits:
Original heads up by tangzq with link to this
That site used the XDA Sapphire goldcard howto here
And apparently myself and XDA as this builds on the HTC knowledge from the old days (here)
In any case, enjoy your new found freedom

Holy ****znit it works! Downgrading!!!!!

Hmm. I've followed the guide and successfully skipped the CID lock check of the device and flashed it to version 2.73.405.5 WWE. Problem is, I can't seem to get the device to boot into recovery mode after using flashrec (I did download and flash it just fine). the recovery mode (home + power) booted the device but it hangs at the boot screen where it says HERO. Any idea?
Edit: Ah. a little bit of the update. while the buttons do not work, i can use adb shell reboot recovery; however, after using flashrec, it still shows the old recovery screen ?
Edit2: confirmed, recovery flasher doesn't work now im using the SEA rom
I'll try the RUU_Hero_HTC_WWE_1.76.405.6_WWE_release_signed_NoD river.exe rom later

I had the same issue with Recovery Flasher I couldn't to boot into recovery. I was also unable to downgrade to the 1.7 roms due to a bootloader version error, arghhh. Anywho, managed to work my way round it, i'll explain below. I've got a T-Mobile G2 updated to the latest rom (so no root access).
I first followed the instructions on making a goldcard and then flashed the 2.73.405.5 WWE rom fine.
Now make sure you have the cm-hero-recovery.img (http://content.modaco.net/dropzone/modacopatchedrecovery-1.0.zip) on the root of your sdcard. Aswell as Instant Root (http://neilandtheresa.co.uk/Android/) now install Instant Root on the phone. It should pop up with a notification "instant root was sucessfully" or along those lines. (If you have a problem installing Instant Root make sure Settings>Applications>Unknown Sources is checked)
Instant root then allows for root access with adb shell using the following 2 commands:
1) adb shell
then
2) su
the icon should change from a $ to #.
Now flash the recovery image with the following command:
1) flash_image recovery /sdcard/cm-hero-recovery.img
This shouldn't take that long once completed it will go back the # prompt example below.
# flash_image recovery /sdcard/cm-hero-recovery.img (I typed this)
flash_image recovery /sdcard/cm-hero-recovery.img (this pops up)
# (this shows the flash completed)
Now pull out your usb cable and battery, turn on the phone with the battery in place while holding the home button and it should boot into the custom recovery .
Well, I hope this helps someone and I didn't just waste my time . Oh, thanks for posting the goldcard instructions.

it worked!!!
Thanks so much! I did the exact process before (see other thread) but I must have missed something. Following this process exactly is what did it. I am guessing something about the reboot and the RUU is where i went wrong before.
I can confirm this works on the 2.73.707.9 ROM

Yaaahaaaayyhaahhahahaahaayyyyyyyyyyyy!!! I feel so happy for all you guys who had this problem (although I myself did not!!)

I kind of half gave up at 6:00 am yesrterday and i just woke up (1
:27pm) and followed the instructions here and BAM! got a working nandroid backup and a custom rom \o/!!! thanks to all of you!

so it's tested and proven for 2.73.707.9?great!

umm ... guys.. if u dont mind me asking...... why do we need it?
do we have hero versions which cant be rooted with any methods?

dying4004 said:
umm ... guys.. if u dont mind me asking...... why do we need it?
do we have hero versions which cant be rooted with any methods?
Click to expand...
Click to collapse
yup, we couldn't root certain asian carrier roms and t-mob rom and they couldnt downgrade so the where stuck, until now....

tianci86 said:
so it's tested and proven for 2.73.707.9?great!
Click to expand...
Click to collapse
CONFIRMED! it works on 2.73.707.9 , just got 2.73.405.5 , im so happy , thanks soo much guys your the best

My Hero..... lol
Thanks, I thought I would be owned by T-Mobile for ever after the ROM update
Now I'm back to the HTC default ROM (NOT T-Mobile G2 Touch!!!), cup of coffee time before Rooting flashing etc and remaining from now on faithful to Paul and the MoDaCo ROM

hey guys!
i have a question
im a owner of an tmobile g2 touch and want to have the new firmware of the htc hero can i use this hack to update to the newest firmware because at the moment it says if i want so update: error this rom is not for your device, and so on..
thx !
bye
sry for my english im from germany

gyounut said:
hey guys!
i have a question
im a owner of an tmobile g2 touch and want to have the new firmware of the htc hero can i use this hack to update to the newest firmware because at the moment it says if i want so update: error this rom is not for your device, and so on..
thx !
bye
sry for my english im from germany
Click to expand...
Click to collapse
ja das stimmt

thx jesterz
successfully update singapore hero 2.73.707 to 2.73.405, rooting in a while...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

d0s said:
I had the same issue with Recovery Flasher I couldn't to boot into recovery. I was also unable to downgrade to the 1.7 roms due to a bootloader version error, arghhh. Anywho, managed to work my way round it, i'll explain below. I've got a T-Mobile G2 updated to the latest rom (so no root access).
I first followed the instructions on making a goldcard and then flashed the 2.73.405.5 WWE rom fine.
Now make sure you have the cm-hero-recovery.img (http://content.modaco.net/dropzone/modacopatchedrecovery-1.0.zip) on the root of your sdcard. Aswell as Instant Root (http://neilandtheresa.co.uk/Android/) now install Instant Root on the phone. It should pop up with a notification "instant root was sucessfully" or along those lines. (If you have a problem installing Instant Root make sure Settings>Applications>Unknown Sources is checked)
Instant root then allows for root access with adb shell using the following 2 commands:
1) adb shell
then
2) su
the icon should change from a $ to #.
Now flash the recovery image with the following command:
1) flash_image recovery /sdcard/cm-hero-recovery.img
This shouldn't take that long once completed it will go back the # prompt example below.
# flash_image recovery /sdcard/cm-hero-recovery.img (I typed this)
flash_image recovery /sdcard/cm-hero-recovery.img (this pops up)
# (this shows the flash completed)
Now pull out your usb cable and battery, turn on the phone with the battery in place while holding the home button and it should boot into the custom recovery .
Well, I hope this helps someone and I didn't just waste my time . Oh, thanks for posting the goldcard instructions.
Click to expand...
Click to collapse
Did it last night and got it working, used the AMON Hero recovery image instead and partitioned my sd card without going through the manual adb solution.
Cheers

could this be adapted for the sprint hero?

Sprint Hero support request strongly seconded, i am desperate to get my CDMA Hero rooted.

have you guys tried using thesame method and got anywhere? I mean, from what I know is that you can't even boot in to recovery mode right? have you guys tries the adb method to boot into rec mode at least?

Aces!!!!
Worked on Indian 2.73.720 like a charm.
Thanks.

[ROOT / TWRP][D851 ONLY][OSX/Linux/Windows] Root/TWRP your TMO G3 with PurpleDrake!

Howdy all!
What's this? Read on, dear reader, to discover the magic that is PurpleDrake.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is this?
This is a utility to easily root your LG G3 (specific models only). It's a fairly foolproof script that includes all the dependencies you'll need for getting your phone rooted easily.
This is the FULL version. This means that it will automatically root, and ask you if you want TWRP installed and a custom boot that doesn't trip the root checker!
Click to expand...
Click to collapse
Who made this?
This root is a collaboration between myself (IOMonster), jcase, and autoprime.
Special thanks also to beaups for some initial guidance looking at the vulnerable application.
Thanks to @Shelnutt2 for the security-disabled boot.img
Thanks to @Dees-Troy for the TWRP image!
Click to expand...
Click to collapse
Is my phone compatible?
The new LG G3 models each are slightly different with regards to rooting and unlocking.
To see a matrix of which LG G3 phones are compatible with this root, please see this Google Docs spreadsheet that we've compiled.
When you run this program, your phone will reboot and run a test to see if it's compatible. If the application succeeds, it'll let you know that it's able to permaroot you. If not, it'll fail gracefully and reboot you back to normal Android without having changed anything.
Please note that this version is currently only compatible with the T-Mobile D851 version of the LG G3. For other phones, we suggest you look for the LITE version of PurpleDrake.
Click to expand...
Click to collapse
How do I use this?
WE NOW SUPPORT WINDOWS! YAY ME
To start, for either platform you'll need to scroll down to the download section and get the file.
Ensure that your phone is in ADB mode (PTP Mode for everyone but Verizon. Verizon users need to be in "Internet"/"Ethernet" mode)
Linux Instructions (in a terminal!)
Extract the file you downloaded...
tar xvf ~/Downloads/PurpleDrake-TMO_VERSION.tar.gz
Mark the application as executable, and run it!
cd PurpleDrake-TMO
chmod +x purpledrake_linux.sh
./purpledrake_linux.sh
OSX Instructions (just a bit easier)
Extract the file you downloaded
Double-click on "purpledrake_osx"
Windows Instructions
Extract the file you downloaded
Double-click on "purpledrake_windows"
The application will guide you through all the steps you need.
You will still need to install SuperSU from the market after installing PurpleDrake. This pack does not include one.
If you choose to install the custom boot.img, your phone's root checker will not be tripped and your phone will show as UNROOTED.
After, be sure to check @autoprime's post for how to disable OTA upgrades! here : http://forum.xda-developers.com/showpost.php?p=54254111&postcount=2
Click to expand...
Click to collapse
But, what if I don't want to run your script to root?
Well then, I'd be a little hurt, but you can still do everything the script does manually.
Download the package, and extract it. Open a terminal in the main folder of the archive and run these commands:
Code:
adb reboot --bnr_recovery
adb push ./assets/start_restore /temp/start_restore
adb push ./assets/permaroot.bin /temp/start_restore
adb reboot
That will perma-root you, however there's no protection from doing something stupid or the phone being incompatible. Please be careful!
Click to expand...
Click to collapse
Where do I get this?
WINDOWS/OSX/LINUX VERSION OUT NOW!
- Fixed Windows support
- Fixed OSX ADB issues not detecting phone first try
- Fixed race conditions leading to errors permarooting
- Added 64-bit Linux ADB
Code:
[url]http://downloads.codefi.re/thecubed/lg_g3/purpledrake/PurpleDrake-TMO_R03.tar.gz[/url]
Old version here... (OSX/Linux only)
Code:
[url]http://downloads.codefi.re/thecubed/lg_g3/purpledrake/PurpleDrake-TMO_R01.tar.gz[/url]
Please DO NOT mirror or re-upload the PurpleDrake software to your own site, or any other file host.
If you need drivers for Windows (thanks @autoprime for having these handy!):
Verizon Drivers: http://downloads.codefi.re/autoprime/LG/LG_G3/LG VZW_United_WHQL_v2.14.1.exe
Everyone Else: http://downloads.codefi.re/autoprim...leDriver_S50MAN311AP22_ML_WHQL_Ver_3.11.3.exe
Click to expand...
Click to collapse
Help, it doesn't work!
Post here, let us know what happened and we'll try to help you. DO NOT private message us on XDA or on IRC asking for help. We will not assist privately.
Most questions if not answered here can be answered on #lg-g3 on IRC in Freenode.
Click to expand...
Click to collapse
Thanks so much! How can I show my appreciation?
Since this was a collaboration project, proceeds that are made from this root will be split between amongst us so we can purchase a Sprint test phone to root (as it's currently not rooted).
If you'd like to donate to us, click the "Donate to me" button on the left sidebar under my name, and be sure to enter a comment to let us know that you're donating towards the PurpleDrake project.
Thanks again!
Click to expand...
Click to collapse

FAQ:
Q: I'm running the Windows .bat as administrator and it's closing/not working.
A: There is no need to run the .bat as admin. Just double-click and run.
Q: I get the "Windows cannot find '.\assets\windows\bin\mintty.exe'." error.. watdo?
A: Try just double-clicking on the .bat instead of running as admin.
Also make sure the script is extracted properly first before running.
Q: I [used Flashify and] am stuck in fastboot.. how can I get out?
A: Be cautious using Flashify as it seems it's not working right.. or people are hitting the wrong buttons with it.
HERE are the stock TMO D851 partitions.
Use fastboot to flash recovery(TWRP or stock) and stock boot. This will install TWRP and fix booting into rom.
If on Windows you will need fastboot drivers. Use Google to find fastboot binaries and drivers.
Code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot reboot
The commands to flash TWRP manually instead of using flashify is below.
Place TWRP on the root of your internal /sdcard/ using MTP, downloading it directly to phone or using ADB push.
Code:
adb push name_of_file.img /sdcard/
adb shell
su
dd if=/sdcard/name_of_file.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
Disable OTA:
Open LG Hidden Menu (3845#*851#) --> WLAN Test --> OTA Setting --> OFF
*Replace "851" with your devices model number, 850, 852, 855 etc...
The first D851 update has been released (10M). Bootloader remained unlocked. It would appear future OTAs will be safe to take AS LONG AS YOUR PHONE IS NOT MODIFIED! If you have flashed TWRP or installed xposed or modified /system then you need to restore any changes made or flash stock firmware (tot/kdz) before taking OTA.
If using a non-tmobile g3 I would be hesitant about taking OTA updates. An OTA may update the boot stack to block Bump!
EFS Backup:
Code:
[FONT="Arial Narrow"][B]Backup EFS after jailbreaking your G3. EFS is split into 2 partitions modemst1 and modemst2.
img files will be on root of internal sdcard. Save the .img files somewhere else besides the sdcard... email, cloud, etc..[/B]
DO NOT FLASH OTHER PEOPLES EFS OR FLASH YOUR OWN BACKUPS ONTO ANOTHER PHONE.
THIS WILL BREAK EFS ON THE PHONE YOU ARE FLASHING TO. EFS BACKUPS ARE FOR THE PHONE THEY CAME FROM ONLY.
I have made a new thread on EFS backup and restore which can be found [URL="http://forum.xda-developers.com/lg-g3/development/efs-lg-g3-efs-backup-restore-t2907329"]HERE[/URL].
[/HIDE]
[B][SIZE="5"]Restoring Stock / Remove root flag:[/SIZE][/B]
[HIDE]
Download the tmo .tot file and use lg flash to restore it to stock. itll format everything on internal sdcard so backup anything u may need off it.
T-Mobile firmware can be found [URL="http://downloads.codefi.re/wolfgart/LG_G3/D851"]here[/URL]. Thanks to [user=608699]@wolfgart[/user] for the files and [user=1157052]@thecubed[/user] for codefire hosting.
*Step by step picture guide - [url]http://imgur.com/W83hMPE[/url]
install the drivers.
put phone into Download Mode (power off. unplug USB. pull battery. put battery back in. press/hold Volume Up then plug in USB cable.)
In Windows Device Manager set the phones serial COM port to #41. (*see picture guide for help)
Install [URL="http://downloads.codefi.re/autoprime/LG/LG_G3/Setup_LGFlashTool_1.8.6.527.zip"][B]LG Flash[/B][/URL]. In "C:\LG\LG Flash" folder delete megalock dll. Replace with .dll below.
new megalock dll - [url]http://bit.ly/1cQADXm[/url] (this site includes a "download manager.. UNCHECK THE BOX before downloading dll file.)
Run LG Flash in the "C:\LG\LG Flash" folder. Select korean factory if asked.
When LG Flash opens you will see a box to select firmware and dll.
Select [URL="http://downloads.codefi.re/autoprime/LG/LG_G3/LGUP_8974.dll"][B]LG Flash .dll[/B][/URL]
Select (.tot)
Hit OK (*see picture guide for help)
Hit yellow start button. If you get Milkyway error click ok. LG Flash will then run a crc check on the tot file. Takes a bit.
After crc check finishes unplug the phone. plug phone back in. it should now be seen in LG Flash and start flashing.
Phone will reboot when finished. You may end up on a screen with s "2"... let it sit there for a minute or two.
If stuck on "2" try unplugging the usb cable from the phone.. wait 10 seconds.. then plug the usb cable back in. now wait 30 seconds and hopefully it changes to a "3"
Once the phone says "3" you can unplug the USB.. remove the battery and plug back in.. boot back up... you are now 100% stock.
[/HIDE]
[B][SIZE="5"]PurpleDrake YouTube Videos:[/SIZE][/B]
[HIDE]
[url]https://www.youtube.com/watch?v=wJtz51KgxjM[/url]
[/HIDE]

And where is the bootloader unlock talked about at the bounty thread or was it just a hoax?
Gesendet von meinem LG-D855

Tectas said:
And where is the bootloader unlock talked about at the bounty thread or was it just a hoax?
Gesendet von meinem LG-D855
Click to expand...
Click to collapse
Hoax? What?
This pack is ONLY for the T-Mobile G3 which has an unlocked bootloader out of the box.
D855 support is NOT included in here. There will be a separate thread when we have an unlock for the bootloaders of the rest of the G3 family.

Tectas said:
And where is the bootloader unlock talked about at the bounty thread or was it just a hoax?
Gesendet von meinem LG-D855
Click to expand...
Click to collapse
There is no boot loader unlock..where ever you read this is misinformed...the T-Mobile variant ships boot loader unlocked, it is the only one so far to be shipping unlocked.

Sweet

thecubed said:
Hoax? What?
This pack is ONLY for the T-Mobile G3 which has an unlocked bootloader out of the box.
D855 support is NOT included in here. There will be a separate thread when we have an unlock for the bootloaders of the rest of the G3 family.
Click to expand...
Click to collapse
I'm aware of that and sry it wasn't meant offensive or to put this one down, autoprime, did imply at the bounty thread, that you as well managed to unlock the bootloader, at least at the beginning, that's what I'm referring to, sry that i said it the wrong way, was a bit disappointed, which for sure isn't your fault or the one of this tool, it's still great progress you made.
Gesendet von meinem LG-D855

I wish the international G3 D855 will be unlocked too
Sent from my LG-D855 using XDA Premium 4 mobile app

Great glad to see this released thank to all that is involved
LGG3 and beyond

All my family is sleep in the room with my Mac will be running asap bright and early. Thank you for your hardwork

Thecubed, autoprime, shelnutt2, jcase, and whoever else....thanks for this. Truly appreciated! Can't wait for Windows support. :Cheers:
Sent from my LG-D851 using XDA Premium 4 mobile app

Plans to support recovery for D855 in the near future?
Need to know to sell or not the G3 ?

What the hell software compatible with a mac that's a 1st whoop whoop well done guys and thanks for the hard work

Yeah great time to be a Mac owner

I have a feeling this treads about to turn in to a "when will this version be supported" topic :/
LGG3 and beyond

Success!
1. THANK YOU!
2. It didn't work the first time around, temproot worked but permaroot did not. Maybe it had to do with the fact that I was reading this forum while it was waiting for my input... I can't see how that would have made a difference but whatever. [[ Edit: It worked the second time running, I just followed the instructions immediately - no problems. /Edit ]]
3. Just a reminder for Linux users ... you have to add udev rules as described here: http://developer.android.com/tools/device.html ... and when you are done with that, also run:
$ sudo service udev restart; sudo killall -9 adb
4. My G3 would only connect to my laptop (Ubuntu 14.04) when it was in PTP mode. MTP or Charge Only did _NOT_ work... Only PTP.
5. THANK YOU AGAIN! You devs rock!
Frank.

Same as the guy above didn't work the first time but worked perfect the second! OSX here.

@ OP
http://forum.xda-developers.com/lg-g3/general/s-carrier-specific-g3-threads-t2818549

I keep getting no such file or directory, going to re download drivers and see

@thecuba not telling you what to do but maybe put this on T-Mobile thread as well http://forum.xda-developers.com/tmobile-lg-g3/development
Hope you don't take it the wrong way

[TOOL] Lx Multi Tool v1.3.2 [WIN/LIN/MAC][Unlock/Recovery/Stock/Kernel/More]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It has LINUX/UNIX and MAC support!
​
Due to the fact that there is another tool for Android called Android Multi Tools, I decided to rename this one to Lx Multi Tool, future releases will go under this name.
Features: ​Fastboot
- Unlock/Lock Bootloader
- Flash Recovery Menu (you can choose and add recoveries) - TWRP 2.8.7.1 Included
- Flash any partition (Flashing submenu)
- Flash full Stock images (you can choose and add images)
- Erase partitions (you can choose which of the partitions)
- Reboot (you can choose again...)
Adb
- Sideload .zip files (you can choose and add .zip files) - SuperSU v2.65 (Systemless!) included
- Backup (you can choose the name and place for your backup)
- Restore (you can choose your backup)
- Version (it just shows the version of your adb binaries) - platform-tools 23.1 included
- Logs (DMESG and Logcat)
- Screenshots (you can directly take screenshots to your PC with no Root)
- Reboot (lots of choices)
Others
- Refresh and delete files/folders from menus (Right click or key F5 and Del)
- Open tool folders from the menus (to add your own kernel/stock image/recovery/sideload zip files)
- Tab key support for easier keyboard navigation
- Tool-tips for all buttons
- Check for updates
- Link to xda-thread (here)
​
Download links: ​Windows x86|x64 - Linux x64 - MAC x64
All released versions can be found here.
​
[ROOT] Use SuperSU 2.62 or higher from here systemless for 6.0.1 and above.​
Known bugs/limitations: ​ - For partition Flashing, it is recommended(mandatory?) to do a reboot-bootloader if you want to flash multiple partitions one after the other. (according to the Google flashing scripts) (Implemented in 1.2.1)
- For return to stock, the tool will be stuck after your phone successfully boots, you need to reboot to fastboot again in order to flash the Radio and finish the full return to stock. (Fixed in 1.2.0)​
Changelog: ​
Check the changelog for each release here.
​
Tutorials/FAQ: ​
Q: How do I get in bootloader/fastboot mode?
Turn off the phone and turn it on by using Volume down + Power key.
Q: How do I check for updates in your tool?
Follow the instructions in the screen below.
Q: Where can I find the device driver to install it for windows?
Click here, download the driver and run the setup.
Q: How do I root my stock phone?
- Unlock bootloader.
- Flash recovery.
- Use SuperSU 2.62 systemless or higher from here.
(Usually the latest version upon tool release is included in the Sideload folder of the tool, you can either sideload it or copy it to recovery and flash it manually)
Q: I get an error "Cannot open file" on MAC, what should I do?
Open the terminal, go to your application path and paste this command:
Code:
chmod +x LxMultiTool.app/contents/macos/*
Q: What do I need to do in order to be in Fastboot or in ADB mode.
Fastboot mode will be detected only while being in bootloader.
ADB mode will be detected from Recovery (custom) and actual ROM with USB debugging active.
Refresh button needs to be used in order to check for what mode you are in.
Q: Are there any other software that I need to install in order to run this tool?
On Windows and MAC everything is bundled, so nothing needs to be installed, just run.
On Linux you need to install from your package manager libQt5Core, libQt5Widgets, libQt5Gui, libQt5Network.
If it's not enough, use ldd LxMultiTool in terminal to find out what you're missing from your environment.
Q: I have an yellow/orange/red text screen during boot, what's that?
When you unlock you usually get the Orange screen and it's normal, but if you really want to know what's this about, give a reading to this.
Q: Hey, my device is not detected, why?
On windows, you need to manually install the USB drivers, they are not included and probably they won't be included in this tool.
Also, make sure you click the connection Refresh button after connecting the device to your PC.
Q: What do i need to do in order to install a custom ROM?
1. Unlock Bootloader.
2. Flash a custom recovery of your choice.
3. Flash an insecure kernel (boot).
4. Flash custom ROM with no problems via recovery.
All those things are found and can be done via this tool.
Q: Hi, i just downloaded this tool, how do i use it?
First, extract the folder somewhere.
After that, run LxMultiTool.exe on windows by double clicking it, LxMultiTool on linux and the same on mac.
Q: Do I need android-sdk installed or something else?
No! This tool uses it's own supplied binaries for adb and fastboot, if you have android-sdk installed it will be ignored anyways.
This tool is fully portable and stand-alone.
Q: I get an error while trying to unlock the bootloader -> FAILED(remote: oem unlock is not allowed), what now?
Starting with Android 5.0, you need to enable Bootloader Unlocking from the developer settings, in order to do that, follow these steps:
- Enable Developer options
- Enable USB Debugging
- Look for the ‘OEM Unlock’ Option and toggle it.
Q: How do I use the return to stock feature?
First download the latest package from here, then extract the contents (there is an archive in the archive) untill you get the a folder like angler-mda89d
that contains the images, that folder needs to be copied in the /Data/StockPackages folder in order to be visible.
Easier steps -> Get your device in bootloader -> Start the tool -> Hit refresh -> go to Stock -> hit open folder -> copy the extracted folder with the name angler-xxxxxx in there, hit F5 or Right-click + Refresh -> you should see the folder in there like in the following screenshot. Thanks @ursa08 for the screenie.
Q: How do I enable Developer options?
- Launch the Settings
- Scroll Down and Tap on About Phone(or About Device)
- Locate the Build Number Section
- Tap on the Build Number Option 7 Times
- Go Back to the Main Settings Page
- Scroll Down and Tap on Developer Options
Q: Hi, i just bought a phone what should i do now?
Well, you firstly need to unlock your bootloader...
Q: What is logcat?
Well, you can pretty much use google for that answer, but to put it short, is that thingy that tells you what is happening behind the scenes of your phone.
It is usually used for debugging and entertaiment(?).
When you report an error/bug to somebody, it will be a blessing to provide a logcat (logfile)!
Q: What is a Custom Recovery and why do i need one?
A custom recovery is that thingy that let's you flash .zip files, use your logic and you wil get it why you need one.
Q:There are others guides/tutorials out there, should i check them instead of this?
If you manage to get things done using this one, no, otherwise yes, note that some could be outdated...
Q:What is sideload and how do I use it?
Sideload is a function from adb that let's you flash a zip file while in recovery directly from your PC.
Please note that you need to be in sideload mode on your recovery before doing this.
To enter sideload mode, in TWRP go to Advanced -> ADB Sideload -> Swipe to sideload​
Sources: ​The official and original repository can be found here.​
Bug reports/Feature requests: ​If you have any bug, or you consider a feature to be a must-have, please use the issue functionality on github for more traceability here.​
Licensing: ​Please note that this tool is open source and released under GPL v3 licence which can be read here.
Make sure you understand at least the short version of the license that's provided in the tool before using it or before contributing/forking and other related stuff.​
Tech and stuff: ​Some additional marketing for stuff used in this tool
Qt - An awesome cross-platform IDE
Vmware - For letting me test this tool on all platforms (Linux and MAC).
Icons8 - A nice platform for good-looking FREE icons. (Big thanks!)
UnixUtils - For the sed utility for Windows.
AndroidFileHost - For the awesome file-management platform for developers.​
Donations: ​Even though this tool is provided free of charge, full open-source, donations are very welcome to support the future development of this tool and to buy me a beer while coding future improvements on it.
This section will also include the hall of fame for donors, as well as on the github repository.
Special thanks for donations:
- @john7760
​
Disclaimer:​I will not be responsible for smashed screens, bricked phones or any other things that you can accuse me of, i've done this tool to help people, use it at your own risk and consider giving a THANKS if you use it and like it.​Please consider leaving some feedback, what to improve, what could be done better, what annoys you, it really helps me improve the tool.
Also, to avoid useless threads on general, Q&A or useless posts, please read the FAQ section upside, it's like a Mini-Guide!

I tried to make a backup but it kept on giving an error; oups something went wrong, could not open *path to backup*.
I thought it may be a permission issue, so checked the app had full permissions and granted it admin access too, still didn't work sadly. This is all using Windows 10 x64.

Dodgexander said:
I tried to make a backup but it kept on giving an error; oups something went wrong, could not open *path to backup*.
I thought it may be a permission issue, so checked the app had full permissions and granted it admin access too, still didn't work sadly. This is all using Windows 10 x64.
Click to expand...
Click to collapse
It's a bug of the platform tools used in the package, the latest version of platform-tools should work. I will try to update it today.
Edit: Fixed in 1.3.1

New update with some fixes that should have been implemented a long time ago...
- Fixed Sideload flashing
- Enabled Recovery rebooting
- Fixed open folder for Stock menu

[Bootloader Unlock] [TWRP] [A7010a48] [Noob]

Overview​
Many people asked me on telegram how they can unlock their bootloader and flash TWRP, as obvious I helped them but then again few people asked me... I was wondering telling entire steps again and again will waste a lot of time so I decided why not on xda-developers?
So here it is presenting a "Noob way to unlock boot-loader, flash recovery" :laugh:
Disclaimer​
]Of course there is a risk of doing anything so I won't take any responsibly of fixing it !! Please do some research if you are not aware of anything. Warranty will be voilà so you won't be able to claim any service repairs for free. Please proceed at your own risk :angel: However, if you follow everything carefully you won't be able to stick into anything.
Click to expand...
Click to collapse
Downloads​1. ADB Driver 1
2. ADB Driver 2
3. Windows 10 Updater
4. ADB Toolkit
5. TWRP ​​
Installations​Now it's not hard but still like a manual, I have added this. To install the drivers first and most important is to update Windows to its latest release. Extract .rar/.zip files downloaded from the above download section and go to the ADB Driver 1 & 2 folder and look if there is an executable file like .exe/.bat if yes then run it as admin and all set if there isn't then you may see a setup information well simple look for a file ends with .inf extension. If you find such a file then simply open device manager and click on your PC name for e.g my PC name is MINIX and then click on action tab select add hardware legacy --> Next --> Search and install automatically --> Next --> Show all --> Next --> Have Disk --> Browse and then go to the folder where the .inf/setup information file is located click on it --> Next and then it may pop up something like driver signature verification failed for it just move HERE All set ! But I would suggest to do a windows update check again for proper installing of drivers and then restart.
Process​Now it's not rocket science! Let's begin!
* Update your phone to latest firmware S232 (Necessary)
* Open ADB Folder
* Copy Downloaded TWRP to ADB folder
* Rename TWRP image to recovery.img
* Move to your mobile turn on USB debugging and OEM unlocking (These options are there in developer option)
* Connect USB (Will pop up some prompt, allow for this pc if still not then revoke USB permission and check back! )
* Run .bat file called as unlock_recovery.bat
----------(Your Phone will reboot into fast boot mode and will start Unlocking process just hit volume up key on your phone when you see a prompt written in small letters)---------
* Now open the cmd/PowerShell in ADB folder itself for that hold shift key and right click will see a prompt with PowerShell/cmd click on that if still confused the go-to address bar and type cmd there. That's its!
* Type the commands one by one has listed :
Code:
fastboot devices
fast boot flash recovery
Now its important that you reboot into recovery for the first time just after recovery flash or else you will need to do entire process again … Now to boot into recovery you will have to hold power key & both volume keys at a time until you see Lenovo logo, then release the power key and volume keys. After the TWRP logo, it will take some time! So wait, but if not boot into recovery do all the process again !
Cheers :good: you have successfully installed TWRP now ! If still not then don't worry drop a replay below so that we can assist you I don't want to make money from this so no donations but still if you want to appreciate my work just hit the small button of :good: That's more than enough for me

Q/A​
Q.1 My TWRP is removed after I booted back into the system, now what can I do?
A.1 Well, This is a normal thing caused due to a backup made by system of stock recover and you will have to delete it in order to fully use TWRP for that process is simple to download Aroma File Manager Flash this zip into TWRP recovery and you will see a file manager locate to system folder and in that look for a file called as recovery-from-boot.p and delete this file only /-
Q.2 My device is rebooting into TWRP only, what to do?
A.2 Now answer is not that simple you will have to download the stock ROM and flash it via SP Flash Tool that's the only option. We are looking into the issue and will find the resolution ASAP.
For more Q/A just drop a comment below and we will try to solve it! And if the issue is common we will add it to this post

We know how important it is for you to get your issue fixed but there are certain rules you will have to follow, please read them so we can assist you further!
1. Don't use bad words
2. There is a pattern you will have to follow so that we can fix it or else it may get neglected
ROM: XYZ
Root Status: N/A
Recovery Version: XYZ
Issue: XYZ (Please use a short and effective description of your problem, Don't make it too long also before you post make sure it's not there in Q/A post.)
Click to expand...
Click to collapse
For more better rectification you can add a screenshot of your issue/error.
For additional help you can reach us at :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Telegram Group​

Hello folks, for redwolf recovery process remains the same, thread
But yea, the name of recovery is redwolf.img whereas for twrp its something else so just use this code
Code:
fastboot flash recovery redwolf.img

@reserved

link is broken

Hello everyone I need a favor from a person who has unlocked bootloader can you help
---------- Post added at 04:21 AM ---------- Previous post was at 04:19 AM ----------
I need some files from you pls please please please please

How To Guide Simple Guide How To Root

Alright so a lot of people seem to have issues with rooting their device and creating a lot of spam on this forum because they don't know how to read.
This guide is for Windows PCs and will be for the people who don't want to read complicated guides.
What you Need:
A Device that has an unlocked Bootloader
The Factory Image of the ROM you are using or updating to Download Here
The Latest STABLE Magisk Download Here, if you are opting for a Beta/Canary then have fun.
7-zip or similar file extractor
ADB and Fastboot, I use Minimal ADB and Fastboot but this Script Here will download the latest version and add it to your PATH.
Way to Transfer Files to Phone (USB Cable?)
Steps:
Update to the Latest ROM. This can be done via Sideloading (personal preference) or OTA
Confirm you are on the same version as the factory image. Current is SP2A.220305.013 aka March 2022 Update
Extract the Zip File to a Folder. Current filename is raven-sp2a.220305.013.a3-factory-87b3bf0a.zip
Go in to the folder and extract the Image ZIP into a Folder. Current Name is image-raven-sp21.220305.003.zip
Find the Boot.img and transfer it to your device.
Install the Magisk Manager APK on the Device
Open Magisk and press Install.
Select "Select and Patch a File" and select the Boot.img you transferred to your device.
Magisk will patch the file and place the new .img file in your downloads. The filename will look like "magisk_patched-24300_abcde.img".
Transfer the patched file from your Downloads folder to your PC.
Reboot your phone to Fastboot mode Youtube Tutorial
Locate the patched .img file and press SHIFT+RightClick, click the option "Copy as Path"
On your PC open Command Prompt. If you dont know how to do this, you shouldn't be rooting your device.
In command prompt type "fastboot flash boot" and then paste the location of your patched .img file.
The whole command should look like "fastboot flash boot "C:\Users\Admin\Downloads\magisk_patched-24300_abcde.img"
Reboot the phone with the command "fastboot reboot"
Once the device is booted up, go to Magisk and see if you are rooted.
If there is enough demand, I can provide photos to help.
If I messed up along the way, let me know and I can change the guide.

Saved

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I can't find my Downlaods folder. Idk what that is.

Gytole said:
View attachment 5574243
I can't find my Downlaods folder. Idk what that is.
Click to expand...
Click to collapse
Fixed lol

vassosman said:
Alright so a lot of people seem to have issues with rooting their device and creating a lot of spam on this forum because they don't know how to read.
This guide is for Windows PCs and will be for the people who don't want to read complicated guides.
What you Need:
A Device that has an unlocked Bootloader
The Factory Image of the ROM you are using or updating to Download Here
The Latest STABLE Magisk Download Here, if you are opting for a Beta/Canary then have fun.
7-zip or similar file extractor
ADB and Fastboot, I use Minimal ADB and Fastboot but this Script Here will download the latest version and add it to your PATH.
Way to Transfer Files to Phone (USB Cable?)
Steps:
Update to the Latest ROM. This can be done via Sideloading (personal preference) or OTA
Confirm you are on the same version as the factory image. Current is SP2A.220305.013 aka March 2022 Update
Extract the Zip File to a Folder. Current filename is raven-sp2a.220305.013.a3-factory-87b3bf0a.zip
Go in to the folder and extract the Image ZIP into a Folder. Current Name is image-raven-sp21.220305.003.zip
Find the Boot.img and transfer it to your device.
Install the Magisk Manager APK on the Device
Open Magisk and press Install.
Select "Select and Patch a File" and select the Boot.img you transferred to your device.
Magisk will patch the file and place the new .img file in your downloads. The filename will look like "magisk_patched-24300_abcde.img".
Transfer the patched file from your Downloads folder to your PC.
Reboot your phone to Fastboot mode Youtube Tutorial
Locate the patched .img file and press SHIFT+RightClick, click the option "Copy as Path"
On your PC open Command Prompt. If you dont know how to do this, you shouldn't be rooting your device.
In command prompt type "fastboot flash boot" and then paste the location of your patched .img file.
The whole command should look like "fastboot flash boot "C:\Users\Admin\Downloads\magisk_patched-24300_abcde.img"
Reboot the phone with the command "adb reboot"
Once the device is booted up, go to Magisk and see if you are rooted.
If there is enough demand, I can provide photos to help.
If I messed up along the way, let me know and I can change the guide.
Click to expand...
Click to collapse
It should be fastboot reboot

fil3s said:
It should be fastboot reboot
Click to expand...
Click to collapse
Good call, I was writing this on the fly and wasn't actually doing it as I was writing the guide.

fil3s said:
It should be fastboot reboot
Click to expand...
Click to collapse
Rather than saying they don't know how to read", it might be that they don't understand the "meta-language" of any given discussion or explanation!

EdBurger l said:
Rather than saying they don't know how to read", it might be that they don't understand the "meta-language" of any given discussion or explanation!
Click to expand...
Click to collapse
Goodo bruh.

vassosman said:
Saved
Click to expand...
Click to collapse
Do you really think this guide is too hard to follow? It's thoughtful that you typed out the steps but is it really less confusing or difficult?
[GUIDE] Pixel 6 Pro "raven": Unlock Bootloader, Update, Root, Pass SafetyNet
⚠️⚠️⚠️ WARNING! IF YOU ARE UPDATING TO ANDROID 13 FOR THE FIRST TIME, READ THIS FIRST!⚠️⚠️⚠️ If you are looking for my guide on a different Pixel, find it here: Pixel 3 Pixel 3XL Pixel 3a Pixel 3aXL Pixel 4 Pixel 4XL Pixel 4a Pixel 4a (5G)...
forum.xda-developers.com

Is the whole vbmeta / boot verification thing no longer necessary?
I tuned out from all the root stuff because I only unlocked in the beginning and didn't want to wipe.

.

dmarden said:
Is the whole vbmeta / boot verification thing no longer necessary?
I tuned out from all the root stuff because I only unlocked in the beginning and didn't want to wipe.
Click to expand...
Click to collapse
They are not required to change if you plan on running Magisk 24.3. I did not change anything when I updated my P6P (bought in Feb) and rooted it.

dmarden said:
Is the whole vbmeta / boot verification thing no longer necessary?
I tuned out from all the root stuff because I only unlocked in the beginning and didn't want to wipe.
Click to expand...
Click to collapse
not needed anymore with latest magisk

That's great news, I've been missing it.

I am going to do this on S3B1.220218.006 (QPR3 Beta 1.1). Fingers crossed!

Worked perfectly, the only thing I might add is a link to the Google USB Drivers (since they must've updated). I had them installed originally (to have unlocked my device in the first place) but needed to update them.
Get the Google USB Driver | Android Studio | Android Developers
The Google USB Driver is required to perform adb debugging on Windows with Google devices.
developer.android.com
Thanks a ton! I would've never noticed that the wipe step was no longer needed.

I recognize I am replying a lot, haha... sorry about that.
Presumably the update method for this should work exactly like past Pixel devices, yeah?
For me, this method was as follows:
1. Download the full image and edit the script to remove the "-w"
2. Install the modified image
3. Boot up once
4. Then basically follow the original procedure from this thread again
I know on OnePlus devices I was always able to uninstall Magisk root via the Magisk app, take the OTA, then reinstall Magist root via the Magisk app before rebooting, but that never seemed to work on Pixel devices (at least for me).

Just to share...
I decided to give the Magisk restore images, OTA, install again before reboot method a try and it worked perfectly going from QPR 1.1 to 2.

Thank you for this post. I would like to root my phone. I am a noob and it’s a little intimidating. If you would add pictures, I for one, would really appreciate that. Thanks again!