I am not having XA1 Plus anymore. This kernel is development discontinued. Sorry for that.
Hello Xperia lovers , Today i am going to present you Xperia XA1 Plus Stock kernel with more usefull features . Since Xperia xa1 plus is not added into XDA yet, Project device is selected temporarily. Will move it later when form Moderators will add this device.
No need to tell about what is kernel and what it do . because almost everyone know these days about kernel and its working process.
So with this kernel you will get twrp 3.2.1 (Latest build) which i have moded to work with MTP devices.
More ever in some devices Data in encrypted automatically. Forcefully data encryption is disabled in this kernel.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Just simply turn on your device, wait for viberation and white led. then press Vol+ OR Vol- button to enter recovery mood Both will work.
This is intial release of this kernel, will update it with more features time by time.
wait for next release with more useful mods and features
To flash this kernel simply install Fastboot and ADB drivers and use flashtool in fastboot mood OR
install ADB and Fastboot drivers,
Then put boot.img in adb and fastboot home path and Or switch off your device and press Vol+ button and attach usb cable
Code:
Fastboot flash boot boot.img
Fastboot reboot
Warning :
Code:
This kernel needs unlocked bootloader
Your Warrenty is void.
i am not responsible if something goes wrong with flashing.
Attaching Stock Boot.img also in case if anyone want to move to stock kernel again.
Many Thanks to developers who inspired us and created tools to work smoothly.
XDA:DevDB Information
[TWRP]+KERNEL+ROOT-Xperia XA1 Plus with advanced features, Kernel for the Sony Xperia XA1
Contributors
Ab.Shaheen
Kernel Special Features: Added TWRP 3.2.1 (Go Through Vol+ OR Vol- on boot) , Disabled Force Encryption of data, Fully Supported Xperia XA1 Plus .117 Stock ROM. (Not Tested With Other ROMs), Disabled Force encryption of userdata,
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2018-01-04
Created 2018-01-04
Last Updated 2018-10-09
Reserved
version 1
~Initial Release
~Based on XA1 PLUS Nougat (.117)
~Disabled force encryption
~Added latest version of TWRP (3.1.2)
~Added SELINUX status in settings > about > SELinux Status
Version 2
~Based on XA1 PLUS Nougat (.131)
~Initrd support added
~Disabled DM Verity.
~Set selinux to permissive
Version 3
~Based on latest Oreo update (.116 & .129)
~Disabled Force encryption (New method)
~Disabled DM-Verity (New Method)
~Updates twrp recovery to new and stable version.
~Battery life is extremely good. using since last week.
~Added some other tweeks.
~init.d still under process. (But you can use magisk module for init.d)
Version 4
~All Points from Version 3
~And new added features.
~If your data is already encrypted, you can decrypt your data from settings,
~Reworked magisk installer. ( Patch boot.img from magisk App by keep selecting preserve "force encryption" and "DM Verity options" Otherwise it may stuck at boot animation. )
Version 5
~Based on Oxa1 plus OREO (.138)
~reworked selinux to permissive
~reworked init.d support
~more stable and working "adb authorization prompt" and "developer options"
just install latest magisk zip to get root access.
Version 6
Updated kernel for 101 firmware.
Download Links
To Download For Nougat and Oreo : Click Here To Download.
root
good joob!! i have xa1 plus. Can modify the CPU gobernor with this kernel?
It's for latest firmware only? .117 one?
Does it support MAGISK or only SuperSU?
What about DRM fix/patch?
Sorry for so many questions, but probably some other user would ask them anyway
ch3mn3y said:
It's for latest firmware only? .117 one?
Does it support MAGISK or only SuperSU?
What about DRM fix/patch?
Sorry for so many questions, but probably some other user would ask them anyway
Click to expand...
Click to collapse
Yes , it support systemless magisk and supersu. I did'not checked with the other versions, may be supporting them or may be not.
DRM patch will be also in next releases of this kernel..
Can anybody provide TA partition backup to look into DRM patch?
Can someone help me? Root XA1 + G3416, Android 7.0 .117
root for 3426 dual is possible? thanks everyone
i had unlocked bootloder successiful, after i had installed this
https://forum.xda-developers.com/devdb/project/dl/?id=27994
phone restart normal.... not in twrp...
how can i install twrp and then install superuser for root....
thanks you...
Alekim91 said:
root for 3426 dual is possible? thanks everyone
i had unlocked bootloder successiful, after i had installed this
https://forum.xda-developers.com/devdb/project/dl/?id=27994
phone restart normal.... not in twrp...
how can i install twrp and then install superuser for root....
thanks you...
Click to expand...
Click to collapse
I have not tested it on 3426. but it should work on that, just download Here It should work, but if not working then please provide kelnel.elf from stock ftf, i can compile it with twrp for you.
enrik98 said:
good joob!! i have xa1 plus. Can modify the CPU gobernor with this kernel?
Click to expand...
Click to collapse
thats not a big deal bro, now working on DRM patch, will update it later..
Ab.Shaheen said:
thats not a big deal bro, now working on DRM patch, will update it later..
Click to expand...
Click to collapse
Hi!
I tried to change the frequency of the cpu with the app "kernel audiutor" and many other apps, but none of them managed to change the frequency of the cpu. I think the problem may be SONY ric
Ab.Shaheen said:
I have not tested it on 3426. but it should work on that, just download Here It should work, but if not working then please provide kelnel.elf from stock ftf, i can compile it with twrp for you.
Click to expand...
Click to collapse
ok thanks you.... this twrp on my G3426 work very well, but i have try to instal superuser.zip.... just say fail....
how can i root my sony now? thanks you...
Alekim91 said:
ok thanks you.... this twrp on my G3426 work very well, but i have try to instal superuser.zip.... just say fail....
how can i root my sony now? thanks you...
Click to expand...
Click to collapse
Try to Flash magisk
TheOldMan said:
Try to Flash magisk
Click to expand...
Click to collapse
i ve installed magisk 15.1 and when i open supersu it say Su binary occupied
solved with flash of Magisk-v15.2(1520) and super user 2.79....
now we hope for a ROM Lineage OS.... any hope?
Alekim91 said:
ok thanks you.... this twrp on my G3426 work very well, but i have try to instal superuser.zip.... just say fail....
how can i root my sony now? thanks you...
Click to expand...
Click to collapse
SuperSu is also working very well on it, but if you will flash systemless zip from Here . System mode Supersu will cause bootloops or stuck at boot animation. And magisk works without any error, tested by me.
enrik98 said:
Hi!
I tried to change the frequency of the cpu with the app "kernel audiutor" and many other apps, but none of them managed to change the frequency of the cpu. I think the problem may be SONY ric
Click to expand...
Click to collapse
Still busy with DRM patch, ric is enabled therefore you are facing this problem, will update it now.
Ab.Shaheen said:
Still busy with DRM patch, ric is enabled therefore you are facing this problem, will update it now.
Click to expand...
Click to collapse
Thanks Bro!!
for xa1 plus there is android oreo? nothing of news? thanks you
is possible to activate double tap to wake? i miss this feature from my z4+...... help me pls
@Alekim91
X and X Compact should get Oreo before XA1 series. And they still didn't. Somewhere (don't remember site) I read that Xes will get it this month and XA1 series around MWC (february/march).
Related
REVIVING THE LOVE FOR STOCK ROM. OPTIMISED STOCK ROM on the base of NPJS25.93-14-4 for MOTO G4/PLUS.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NOTE: This thread is best viewed on a desktop browser like Microsoft Edge/ Google Chrome/etc.
FEATURES:
1. FULLY DE-ODEXED by smali-2.2.0 and baksmali-2.2.0 .
2. FULLY DE-BLOATED
3. ZIP-ALIGNED ALL SYSTEM AND FRAMEWORK APPS
4. March 1 Security patch & Android Nougat 7.0
ALLEGED PERFORMANCE IMPROVEMENTS THAN STOCK NPJ25.93-14:
1. Faster in general UI performance.
2. Apps will use less storage and memory because the ROM is deodexed, debloated and zipaligned.
3. More battery efficiency as claimed by the update npjs25.93-14-4 + point 2.
4. A bit less of heating than stock owing to debloat.
DOWNLOADS:
1. TWRP 3.1 by @oadam11: Post 2 of Ground Zero ROMs thread for athene
2. ROM: Android File Host Link
3. SuperSU v2.79 SR3: [BETA]SuperSU v2.79 SR3 thread
4. Magisk v12 : Magisk Release Thread
5. Magisk Terminal Debloater v4 module/script: Download manually here from this Thread or from the Download section under Magisk Manager App.
6. ElementalX Kernel v1.04 for Stock N ROM: ElementalX Kernel thread for athene
7. Vegito Kernel v6.5 for Stock N ROM: Vegito Kernel Thread
INSTALLATION PROCEDURE:
1. Make appropriate backups in TWRP.
2. Wipe System, Data, Cache and ART Cache.
3. Install the ROM. (No need for GApps)
4. Reboot.
5. Update Google Play Store via tapping on version in Play store settings and after that update the Google Play services.
6. Update all the apps and reboot once.
NON-ROOTED. Why?
Simply because some people want MagiskSU and some want SuperSU. Moreover rooting would require changing the kernel to ElementalX or Vegito as there was no root exploit in stock N kernel.
BUGS:
1. Settings app MAY crash if you open the Apps section. If you want to configure the default apps tap the gear icon immediately.
Getting it to work is pure LUCK. Sorry I have no fix for it. Happens only to me idk why. No one else reported this.
ROOTING PROCEDURE:
WARNING: IF YOU DIRECTLY FLASH SOME SU MANAGER YOUR DEVICE WON'T BOOT.
1. Take appropriate backups in twrp (Boot partition recommended).
2. Flash ElementalX kernel v1.04 for Stock ROM or Vegito Kernel v6.5.
3. Reboot (Optional).
4. Flash your desired su manager (Magisk v12 or SuperSU v2.79 SR3).
5. Reboot (Incase of SuperSU boot process will loop once).
6. Update the Magisk Manager/ SuperSU from PlayStore(If needed).
IMPORTANT NOTES:
DON'T TRY INSTALLING ANY FUTURE OFFICIAL OTA FROM MOTOROLA ON THIS ROM. FLASH STOCK NOUGAT FROM HERE IF NEED BE. I have already removed the '3c_ota' app using the magisk terminal debloater script, although, if you get any update via the OTA app, don't try installing it.
SUBSTRATUM/OMS Support won't be possible on this ROM as it is based on prebuilt system images instead of some raw source code. Legacy mode may work with root. Do not report bugs for the same. I'm not responsible for the consequences of themeing.
This ROM will NOT upgrade your BOOTLOADER and PARTITION TABLE. They'll remain the same as NPJ25.93-14 (Dec 1 Patch) unless you had flashed the March 1 patch in stock recovery.
Hello moto sound and boot animation works fine
Credits/Thanks:
1. @kosmasgr for the TWRP backup.
2. @Swapney Raul for testing the ROM.
3. @oadam11 for TWRP 3.1.0
4. @Chainfire for SuperSU.
5. @topjohnwu for Magisk.
6. @veez21 for Magisk Terminal Debloater.
7. @flar2 for ElementalX kernel.
8. @Dreamstar for Vegito kernel
9. XDA for the amazing dev portal.
10. Motorola for the device. (Ik many of you hate Lenovo)
11. Google ofc for Android and the open source community.
12. Android File Host for hosting the downloads.
If I missed anyone..do PM for the same. :good:
Do check out the bootlogos/splash screens I have made for athene.
ADDITIONAL SUPPORT:
1. Custom ROM help thread.
2. For further assistance, you can message at Telegram: Personal or Community.
HIT THANKS IF YOU LIKED IT. :good:
XDA:DevDB Information
RevivorOS, ROM for the Moto G4 Plus
Contributors
tywinlannister7
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock N 93-14-4
Based On: Stock ROM
Version Information
Status: Stable
Created 2017-05-18
Last Updated 2019-11-22
Reserved :good:
Thanks ? and files manager works fine if u update the app.
Hi! Can I flash without wiping data if I'm already on stock NPJS25.93-14? Thanks!
A BIG NO
pblasi said:
Hi! Can I flash without wiping data if I'm already on stock NPJS25.93-14? Thanks!
Click to expand...
Click to collapse
No I would not recommend this. Since the apps are deodexed and zipaligned with many of them being removed. So this will create a problem on a dirty flash. Instead use Titanium Backup for apps and their respective data.
fr3d0x said:
Thanks and files manager works fine if u update the app.
Click to expand...
Click to collapse
Thanks for the heads-up :good:
Αwesome rom @tywinlannister7. Also i edited build prop , adding line ro.sf.lcd_density=410 before flashing and works excellent.
I have fc with file manager but there is no file manager ( strange ) and fc with appbox but also there is no this app
Wipe data and cache will solve the problem
tywinlannister7 said:
1. Moto File Manager and a few apps may give you Force Stops on first boot. If force stopping the app and then clearing its data and wiping cache (both)
FIX: Force Stop the apps>Clear Data>Update from Google Play>Wipe caches (both ) in twrp> Reboot
Click to expand...
Click to collapse
I tried this, but still getting "Retail Config Service" FC at boot... Any ideas to get rid of it?
kosmasgr said:
Αwesome rom @tywinlannister7. Also i edited build prop , adding line ro.sf.lcd_density=410 before flashing and works excellent.
I have fc with file manager but there is no file manager ( strange ) and fc with appbox but also there is no this app
Wipe data and cache will solve the problem
Click to expand...
Click to collapse
Deodexing and debloating might be a reason. These apps work in the background as system apps and create a bit of the force stop thing.
pblasi said:
I tried this, but still getting "Retail Config Service" FC at boot... Any ideas to get rid of it?
Click to expand...
Click to collapse
What model do you have? I have tested this on the indian xt1643. Although the base of the ROM is from the European model (Shouldn't make any difference imo).
Can you try disabling or uninstalling it? (Proceed with backup). If no help, I'll need a logcat and try to find a fix. I'm still a beginner and this is my first ROM after Lineage. ?
pblasi said:
I tried this, but still getting "Retail Config Service" FC at boot... Any ideas to get rid of it?
Click to expand...
Click to collapse
I got this error while setting up the device but after the setup it was gone haven't seen that error since then,do you get it often?
If i flash this from mm will my modem will change to nougat?
dedik46 said:
If i flash this from mm will my modem will change to nougat?
Click to expand...
Click to collapse
No
It would be nice if you could add substratum support
[email protected] said:
It would be nice if you could add substratum support
Click to expand...
Click to collapse
I think as this is a stock ROM we can't add Substratum commits in, though if I'm incorrect someone correct me!
Nice work by the way, tywinlannister7 good to see a TWRP flash of the latest security patch and OS!
Thanks for this stock rom just only two question....Is RetBR base or wich?? is necessary flash official nougat before???
diegomartinezlovey said:
is necessary flash official nougat before???
Click to expand...
Click to collapse
I think you should do so, ideally, so that your baseband and other firmware is at least on Nougat, before then wiping your device and then flashing this TWRP file as per the opening post.
diegomartinezlovey said:
Thanks for this stock rom just only two question....Is RetBR base or wich?? is necessary flash official nougat before???
Click to expand...
Click to collapse
You need to first flash the Dec 1 path update then this so that all things work.
echo92 said:
I think as this is a stock ROM we can't add Substratum commits in, though if I'm incorrect someone correct me!
Nice work by the way, tywinlannister7 good to see a TWRP flash of the latest security patch and OS!
Click to expand...
Click to collapse
As far as I know we can add using small editor but it's a hard job so no one does that.
diegomartinezlovey said:
Thanks for this stock rom just only two question....Is RetBR base or wich?? is necessary flash official nougat before???
Click to expand...
Click to collapse
I had used the system and boot dump from the reteu model owned by @kosmasgr . But the ROM should work fine as long as you have updated to Nougat NPJ25.93-14 or above.
TWRP
This project provides the TWRP recovery for for the Sony Xperia XZ1 Compact (lilac).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FEATURES
File-Based Encryption (FBE) support
EXT4 support
F2FS support
EXFAT support
Provides unzip
Additional languages
This recovery will use the security patch level from the system partition to decrypt data. It should not be tied to a security patch level anymore.
DOWNLOAD
Make sure you download the .img and corresponding .asc.txt file (see INTEGRITY)!
You can always find the latest version of the recovery HERE.
INTEGRETY
The recovery images also come with an GPG armor file (.asc). With that file you verify that the image I created hasn't been altered.
How do you do that?
Download my gpg keyring here: https://cryptomilk.org/gpgkey-8DFF53E18F2ABC8D8F3C92237EE0FC4DCC014E3D.gpg.
Download the recovery.img and recovery.img.asc.txt file
Rename the recovery.img.asc.txt file to recovery.img.asc
Verfiy the signature using the following command:
Code:
gpg --keyring ./gpgkey-8DFF53E18F2ABC8D8F3C92237EE0FC4DCC014E3D.gpg --verify recovery.img.asc
A good tutorial is: How to verify signatures for packages from the Tor Project.
SECURITY ADVICE
Don't flash ROMs or Magisk modules which set SELinux to permissive or you welcome malware on your device!
XDA:DevDB Information
recovery_twrp_sony_lilac, Tool/Utility for the Sony Xperia XZ1 Compact
Contributors
modpunk, Dees_Troy
Source Code: https://github.com/cryptomilk/android_device_sony_lilac
Version Information
Status: Stable
Current Stable Version: 3.3.1-0
Stable Release Date: 2019-09-16
Created 2017-11-18
Last Updated 2019-09-16
Nice work!
What does the STOCK addition in the title mean?
Can't I flash for example LOS with it?
Nice work! So does that mean that we finally can root our xz1 compact?
And currently this TWRP is not working for security patch November, right? I mean build nr: 47.1.A.5.51
4rz0 said:
What does the STOCK addition in the title mean?
Can't I flash for example LOS with it?
Click to expand...
Click to collapse
RTFM!
aikon96 said:
Nice work! So does that mean that we finally can root our xz1 compact?
And currently this TWRP is not working for security patch November, right? I mean build nr: 47.1.A.5.51
Click to expand...
Click to collapse
No, I need to create one for November. Will do that soon.
modpunk said:
RTFM!
Click to expand...
Click to collapse
I did read the OT, if that's what you mean, but it doesn't answer my question.
If the LOS I want to flash comes with the same security patch level, would it work?
4rz0 said:
I did read the OT, if that's what you mean, but it doesn't answer my question.
If the LOS I want to flash comes with the same security patch level, would it work?
Click to expand...
Click to collapse
There is no limitation in flashing. However there is no LOS you can flash yet ...
works perferct! thank you :good:
I got an XZ1. Any chance to get TWRP for it (for testing)?
Could someone please test https://xor.cryptomilk.org/android/twrp-lilac/twrp-3.1.1-0-lilac-patchlevel-2017-11-05.img
TWRP
modpunk said:
Could someone please test
Click to expand...
Click to collapse
ok. I'll test it
modpunk said:
Could someone please test https://xor.cryptomilk.org/android/twrp-lilac/twrp-3.1.1-0-lilac-patchlevel-2017-11-05.img
Click to expand...
Click to collapse
I will indeed test too juhuuu...
it flashes okay via fastboot, and twrp is also working. except for format option under wipe, when typing 'continue' it seems like it doesn't show the inputs, only the last letter 'e'
anyway after i flashed the twrp, i booted it up, and mounted everything except for otg. and then of course i flashed magisk.zip (latest v14) and it also succeeded
but then when i reboot from twrp, it stucks at sony logo, meaning default bootanimation doesn't kick in, and i patiently waited for like 10-15 min
so i assume it's not working. i even tried with a userdebug and regular user build 47.1.A.5.51
now i will try just to boot the twrp without flashing it and then flash magisk.zip while it's booted up via fastboot to see if it boots up normally
a) Do you have your partition encrypted and could you mount it, so it asked for a password?
b) TWRP writes a log file you can download adb pull /tmp/recovery.log
c) adb logcat is also working
Note that there is currently no upstream TWRP developement for Oreo ongoing. I just wrote several hacks to get it working.
modpunk said:
a) Do you have your partition encrypted and could you mount it, so it asked for a password?
b) TWRP writes a log file you can download adb pull /tmp/recovery.log
c) adb logcat is also working
Note that there is currently no upstream TWRP developement for Oreo ongoing. I just wrote several hacks to get it working.
Click to expand...
Click to collapse
A: it does not ask for password upon bootup so i guess it's not encrypted in that way
B attached here
C is there any specific logcat you want, like error or fatal level etc.
Question just to be clear: do we have to update twrp for evry new securitypatch?
To decrypt the /data partion on a stock ROM, yes you do.
Hi modpunk,
Ur a true star...****
I just want to ask a couple of question's.
Does the bootloader have to be unlocked in order to flash this....?
I have had a Z3 Compact and got it rooted with bootloader locked and also a Z5 Compact using munjen setup.
Install TWRP on it Flashed SuperSU using TWRP was best thing i did.
Do you have a step by step guide how to flash this. I would love to test it for you.
When you flash is it using munjen flashtool...?
Thanks Sham
UPDATE
TRWP is working actually, just figured out that it's magisk that get the phone not to boot, bith 14 and 14.5
and latest supersu both the xperia one and the regular one v.2.82 fails, give error "unzip fail, no proper recovery etc."
Now for fun i will load it up with userdebug firmware and see if i can make it manually root with the "angela" method
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am sharing my kernel/boot.img, which is build from Sony Open Source/Qualcomm/ and android source (Very close to Stock KERNEL). Designed to keep balance security/ with high Performance and battery life.
Code:
###Disclaimer###
I am not responsible for any damage, broken or boot looping.
Please read the instructions and notes before flashing anything. Don't ask me if you don't read the instructions.Please respect and try to help each other. You may face sometimes that I cannot answer your questions/or answer your questions a bit later. I am busy with my work and don't have enough time to read and answer all your questions at the same time.
DONATE ME HERE
DONATE-HERE
##############################
Requirements-
##############################
- A working driver for your device.
USB drivers for Xperia devices
- Unlock bootloader
- A Working TWRP-with latest patch security
- YOUR firmware must match my kernel version. I used to update the kernel with latest firmware.
- Backup your stuff for future
- YOU NEED a refresh stock ROM (means you have to wipe EVERYTHING). Use flashtool to flash the latest firmware. (Remember to check Wipe USERDATA in flashtool). It seems not necessary if you have already flashed my kernel and have a working camera
- USE LATEST FLASHTOOL VERSION TO FLASH THE LATEST FIRMWARE
- (DOWNLOAD FROM HERE:- LATEST FLASHTOOL)
[/INDENT]##############################
Features 11/3/2019
##############################
- Based on latest kernel source VERSION = 4, PATCHLEVEL = 4, SUBLEVEL = 148 (version 47.2.A.8.24) MARCH, 2019
- Up to date with the September security update MARCH, 2019
- Hide verifiedbootstate from /proc/cmdline in order to fix the failed SafetyNet CTS check(It can still fail through other means)-GOOGLE PAY SHOULD WORK
- Remove verifiedbootstate flag from /proc/cmdline - Disable CRC check
- Support wireguard VPN protocol
- dm-verity removed
- Sepolicy is patched for latest Oreo (deodex ROMs)
- Scheduler optimize/support for heterogeneous multi-core. Battery efficiency
- Energy Aware Scheduling (EAS) feature is enabled/optimize energy consumption for advanced multicore SoCs
- Update and add Qualcomm PM driver/APM driver updated reduce battery usage during sleeping
- Enable latest energy aware scheduling patches
- Multi-core scheduler enable/optimized
- A lot subsystems converted to use power efficient work-queues
- CAF improvements and optimized
- Enable latest energy aware scheduling patches
- Enable work-queue power-efficient mode by default
- Several other patches to improve the speed and battery usage
- Tweaked the scheduler to reduce/save power by scaling down the frequency of the CPU's or idling them,
- Tweaked to predict the best time to save power on the CPU without affecting performance
- Tweaked/optimized the scheduler to balance the load across all CPUs without any regards to the power costs.
##############################
Instructions-
##############################
- Boot into custom-recovery and flash the zip OR UNZIP the zip, then move the boot.img into your adb/fastboot folder and follow
Code:
- adb devices
- adb reboot bootloader
- fastboot devices
- fastboot flash boot boot.img
- fastboot reboot
- DONE AND ENJOY
##############################
Downloads
##############################
Xperia XZ Premium(G8141 and G8142)-[LATEST]-[11/MARCH/2019]
##############################
Xperia XZ Premium(G8141 and G8142)--ALL-BOOT IMAGES-[KERNEL][DRM-PATCHING]-
##############################
##############################
Source/GitHub
##############################
Kernel Source
-47.1.A.12.xxx
https://github.com/Nexusma/msm-4.4
https://github.com/toffyjan/android_kernel_Sony_lilac_poplar
https://github.com/sonyxperiadev/device-sony-lilac
IF YOU LIKE MY WORK AND WANT ME TO CONTINUE, THEN DON'T FORGET TO BUY ME COFFEE
DONATE ME HERE
DONATE-HERE
Special Thanks To:
If you can, donate and respect all the devs
@Chainfire for his great work to achieve root SuperSU
@Sultanxda for his great work in android kernel and SafetyNet CTS check
@Androxyde for Flashtool. merci beaucoup pour tout
@munjeni for his great knowledge and tools for extracting SIN images
@sToRm// for his effort on DRM work, THANKS
@SuperR. for SuperR's Kitchen , THANK YOU
@M-Rom Thanks for sharing drm-fix and patch
@serajr Thanks for DRM Fix Workaround and Sony RIC disabler
THANK YOU SONY FOR SUPPORTING DEVs AND ALLOWING US TO UNLOCK THE BOOTLOADER
Thanks to XDA And everyone else who share their knowledge and works among us in xda.
##############################
Detailed instructions-
##############################
Please install all drivers and ADB files needed.
1. Download to PC XperiFirm_5.3.6_(by_Igor_Eisberg).
2. Download to PC newflasher_v11.
3. Download to PC and unzip XZ-Premium-G8141/G8142-Kernel+DRM+patch+Magisk+47.1.A.xx.xxx.zip.
4. copy the 4 zip files to the any device microSDcard folder.
5. Download to PC twrp 3.2.1-0-maple and copy the img file to ADB folder.
6. Run XperiFirm and download latest firmware update, for G8141 or G8142
7. copy the newflasher.exe to the firmware downloaded folder.
8. power off the device, press and hold vol- and plug the USB cable some seconds, review the green led is on, bootloader mode.
9. run the newflasher copied on the firmware folder.
10. unplug the USB cable when the process finished.
11. press and hold vol+ and plug the USB cable some seconds, blue led is on, flash mode.
12. open a window "cmd" and go to ADB folder.
13. run the command "fastboot devices" to check the device is showed.
14. run the command "fastboot flash recovery twrp-3.2.1-0-maple.img".
15. unplug the USB cable and reboot to twrp recovery (press and hold vol- + power button).
16. On twrp menu, go to "Advanced" and "File Manager" and copy from microSDcard folder the 4 zip files to root "/" internal storage.
17. install the 1-kernel and reboot to recovery.
18. install the 2,3,4 zip on order and reboot.
19. enjoy
THANKS TO hbenavid FOR THESE STEPS
janjan said:
For future-
Click to expand...
Click to collapse
Hello, if you want to make it for dual sim I'm able to be the tester of the kernel if you want talk to me in private
SilverGamer_YT said:
Hello, if you want to make it for dual sim I'm able to be the tester of the kernel if you want talk to me in private
Click to expand...
Click to collapse
I will start build one for Dual SIM tonight.
janjan said:
I will start build one for Dual SIM tonight.
Click to expand...
Click to collapse
Perfect I'm here for any test
Your links need a decryption key buddy.
Beetle84 said:
Your links need a decryption key buddy.
Click to expand...
Click to collapse
yes, links encrypted need decryption key to open
SilverGamer_YT said:
Perfect I'm here for any test
Click to expand...
Click to collapse
Done. Enjoy
Beetle84 said:
Your links need a decryption key buddy.
Click to expand...
Click to collapse
karrouma said:
yes, links encrypted need decryption key to open
Click to expand...
Click to collapse
Links are fixed now. Enjoy
janjan said:
Links are fixed now. Enjoy
Click to expand...
Click to collapse
dual sim got bootloop with magisk 16.3 and 16.4
didn't try oldest version. tomorrow i will try
karrouma said:
dual sim got bootloop with magisk 16.3 and 16.4
didn't try oldest version. tomorrow i will try
Click to expand...
Click to collapse
Be more clear please. Did you follow the instructions? Are you on stock ROM without any kind of modifications. Otherwise it doesn't work.
janjan said:
Done. Enjoy
Click to expand...
Click to collapse
there is a problem when i tried to flash 2-patching
/vendor cannot be mounted
SilverGamer_YT said:
there is a problem when i tried to flash 2-patching
/vendor cannot be mounted
Click to expand...
Click to collapse
Please follow the 2nd method to flash 2-patch.zip
Very important.You should be on stock ROM.
Let me know if it doesn't work for you.
Hi,
Thanks for your work.
1. I have flashed the firmware: G8141_Customized CE1_1308-5321_47.1.A.12.145_R5B via "newflasher"
2. flashed the recovery twrp-3.2.1-0-maple.img
3. flashed the boot 1-boot.img
4. copied the 2-Patching.zip, 3-Magisk-latest.zip and 4-kernel-permissive.zip to "Download" folder in the internal storage.
5. reboot to twrp recovery.
6. Try to flash 2-Patching.zip and error: /vendor cannot be mounted.
stop.
SilverGamer_YT said:
there is a problem when i tried to flash 2-patching
/vendor cannot be mounted
Click to expand...
Click to collapse
when u first boot into TWRP , select mount then tick system then install the Zips
7aMooD-DmC said:
when u first boot into TWRP , select mount then tick system then install the Zips
Click to expand...
Click to collapse
That is how you fix the same issue as me?
7aMooD-DmC said:
when u first boot into TWRP , select mount then tick system then install the Zips
Click to expand...
Click to collapse
@janjan
Also tried to tick system then install 2-patching.zip
And same error like others.
If i flash the 1-boot.img and restart my phone i got bootloop on xperia.
I testet on stock xz premium dual. (not any other rom)
Also trying with turbo rom on my other xz premium and same problem also
karrouma said:
@janjan
Also tried to tick system then install 2-patching.zip
And same error like others.
If i flash the 1-boot.img and restart my phone i got bootloop on xperia.
I testet on stock xz premium dual. (not any other rom)
Also trying with turbo rom on my other xz premium and same problem also
Click to expand...
Click to collapse
I will take a look once again. Thanks for the report
janjan said:
Be more clear please. Did you follow the instructions? Are you on stock ROM without any kind of modifications. Otherwise it doesn't work.
Click to expand...
Click to collapse
Yes , after hard reset.
Phone boot without rooting.
After flashing 1 boot.img i got boot loop.
I follow system mount and same problem can't glash 2-patching also.
SilverGamer_YT said:
there is a problem when i tried to flash 2-patching
/vendor cannot be mounted
Click to expand...
Click to collapse
hbenavid said:
Hi,
Thanks for your work.
1. I have flashed the firmware: G8141_Customized CE1_1308-5321_47.1.A.12.145_R5B via "newflasher"
2. flashed the recovery twrp-3.2.1-0-maple.img
3. flashed the boot 1-boot.img
4. copied the 2-Patching.zip, 3-Magisk-latest.zip and 4-kernel-permissive.zip to "Download" folder in the internal storage.
5. reboot to twrp recovery.
6. Try to flash 2-Patching.zip and error: /vendor cannot be mounted.
stop.
Click to expand...
Click to collapse
karrouma said:
@janjan
Also tried to tick system then install 2-patching.zip
And same error like others.
If i flash the 1-boot.img and restart my phone i got bootloop on xperia.
I testet on stock xz premium dual. (not any other rom)
Also trying with turbo rom on my other xz premium and same problem also
Click to expand...
Click to collapse
Here is a new build. for G8142 Dual SIM. Follow the steps from 1st post.
https://mega.nz/#!wpRyzSQB!HsqTpJIEozjd85DLXHHWO3LjTo0d4dkYdRA8RimRn4M
Please let me know, if there is something. It should work for XZ premium too (works fine with XZ1 and XZ1 compact. NO issue there)
Team Win Recovery Project 3.3.1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Exynos ONLY.
In NO way it is compatible with Snapdragon variants including but not limited to American(U/A/T/P/V), Chinese(0/8/6), Hong Kong(0), Japanese(SC-*), Canadian(W) variants.
Special Notes:
1. DON'T FORGET TO ENABLE "OEM UNLOCK" (located in Developers options).
2. KNOX will be tripped once you flashed custom binaries to your phone.
(Your warranty may be voided. However this may not affect you if your country forces Samsung to provide hardware warranty regardless of software status.)
3. Samsung Firmware OTA (aka System Updates) will no longer work once you flashed custom binaries.
(You can flash custom ROMs if you want to keep the OS up-to-date.)
4. All apps that use KNOX like Samsung pay, Secure Folder and maybe more will no more work
Download: Note 10(Exynos variants - N970/971/975/976/N/F/B)
Download
Sources:
TWRP Tree and kernel source
Changelog:
15.12.2019
- Updated TWRP for Android 10.0
- From now on no more Magisk Prepatched images (if you need it patch it byself or flash my kernel where patched recovery is not needed)
22.09.2019
-Reverted MTP Changes from last build since for some mtp dont worked in system
21.09.2019
- Fixed the bug that mtp dont worked any more on TWRP when usb cable got disconnected and reconnected
- Modded Kernel for have MTP in TWRP, Samsung Roms and GSI roms (for GSI Roms flash GSI_MTP_ENABLER.zip)
- Reverted FFS MTP changes since new way is more stable
14.09.2019
- Fixed MTP using FFS_MTP in recovery (Thx to @bigbiff for add FFS MTP support on TWRP 3.3.0. FFS_MTP dont corrupts large files like the mtp used by samsung in the roms)
- Removed File Based backups because the phone refuses to boot from filebased backups since they breaks the rootfs
27.08.2019
-Initial Release
Bugs:
-No one
Telegram Group
https://t.me/twrp_n10
XDA:DevDB Information
[RECOVERY] TWRP for Galaxy Note 10 (Exynos), Kernel for the Samsung Galaxy Note 10
Contributors
geiti94
Kernel Special Features:
Version Information
Status: Stable
Stable Release Date: 2019-08-27
Created 2019-08-27
Last Updated 2019-12-15
Guide:
Go to Developer settings and enable oem unlock
power off the device and boot in download mode with power + vol down buttons and plug in the usb (make sure usb cable is connected to the pc)
in download mode you see the long press vol up option for unlock bl
unlock the bootloader (that will wipe your device so be sure you made a backup of your data)
after bootloader unlock boot up the phone and make sure it is connected to the internet or he triggers rmm prenormal
setup the phone without google account etc
reboot in download mode and flash twrp tar for your device with odin in the AP field (if you want to patch twrp byself patch the downloaded tar in magisk manager. patched tar is in downloads folder after patch)
hold vol up + power button while odin is flashing until you are in twrp.
format data in twrp
flash the disabler that is on TWRP download link
flash my kernel avaiable here
press reboot to system in twrp.
so since i am not all the time here on xda here is a telegram group link. use it for report bugs etc since i dont read all the time the complete thread here https://t.me/twrp_n10
so multidisabler is updated to v2 and stock rom boots again normaly sammy added 2 more encryption in the n10 that needed to get disabled
Magisk Patched builds are now uploaded too for the one that dont wants to patch byself
Great work! Stuck with the snapdragon hopefully something pops up for us.
Thanks! For some reason it doesn't detect my sim after flashing this. Anyone else have this issue?
I've got root working fine but no TWRP yet
is it once rooted there is no way to get back Samsung pay ?
Also I root my phones only for Ads away for youtube app and youtube app being able to play in the background with screen off
Is there any ways we can have these without rooting ?
bboyalanleung123 said:
is it once rooted there is no way to get back Samsung pay ?
Also I root my phones only for Ads away for youtube app and youtube app being able to play in the background with screen off
Is there any ways we can have these without rooting ?
Click to expand...
Click to collapse
Easy, just Pay for premium YouTube
bboyalanleung123 said:
is it once rooted there is no way to get back Samsung pay ?
Also I root my phones only for Ads away for youtube app and youtube app being able to play in the background with screen off
Is there any ways we can have these without rooting ?[/QUOTE
Youtube vance
Click to expand...
Click to collapse
No root needed for that
ahno banaag said:
bboyalanleung123 said:
is it once rooted there is no way to get back Samsung pay ?
Also I root my phones only for Ads away for youtube app and youtube app being able to play in the background with screen off
Is there any ways we can have these without rooting ?[/QUOTE
Youtube vance
Click to expand...
Click to collapse
If you root your phone just for you tube ad away you don't need. Just install you tube vanced for not rooted phone and you good to go ?
Click to expand...
Click to collapse
Gilad.i said:
ahno banaag said:
If you root your phone just for you tube ad away you don't need. Just install you tube vanced for not rooted phone and you good to go
Click to expand...
Click to collapse
Don't forget to install micro g with YouTube vanced too.
I used to root just for adaway and YouTube mods, but with ad guard and YouTube vanced I feel I no longer need to root my devices.
Click to expand...
Click to collapse
nvm
So ASHE sources are out. Today after work i will upload ASHE builds for all 4 modells
So new builds are uploaded and note 10+ bootloop issue is fixed (magisk manager corrupted me recovery.img on last builds)
so today again a big update will be here and thats twrp with working mtp in system and recovery
so new builds with working mtp are uploaded
geiti94 said:
Guide:
......
7. reboot in download mode and flash the magisk prepatched tar for your device with odin in the AP field (if you want to patch twrp byself download unpatched tar and select it in magisk manager. patched tar is in downloads folder after patch)
.......
9. flash the multidisabler zip by ian in twrp
........
Click to expand...
Click to collapse
Hello,
I hope you're fine sir,
I just got my Note 10 plus and about to root it,
However, I am a bit lost when you said magisk prepatched and unpatched, what is the difference...?
Also, for the multidisabler , there are formatting steps, so should I do your steps and do the multidisabler thread steps, or yours are enough...?
I just want a perfect flash, I had a terrible experience with my Note 9 unfortunately due to misunderstanding the steps...:crying:
For now, I'll be backing up and completing all the steps required before I move on the new phone...
I do hope you or anyone else sees this and guides me through...:fingers-crossed:
Bless you and all developers and helpers :good::angel:
SPMelly said:
Thanks! For some reason it doesn't detect my sim after flashing this. Anyone else have this issue?
I've got root working fine but no TWRP yet
Click to expand...
Click to collapse
I have the same problem, I have magisk and TWRP but it doesn't detect sim. did you find a solution?
SPMelly said:
Thanks! For some reason it doesn't detect my sim after flashing this. Anyone else have this issue?
I've got root working fine but no TWRP yet
Click to expand...
Click to collapse
Okay. I have solved it by flashing the original firmware downloaded from Sam mobile, after that I repeated the steps but I changed the AP file since I had downloaded the one from N976, download the correct ones for N975 and it was fixed. I already recognized the SIM
Help, cant backup the system image.
Hi, i need some help.
I had n975 and twrp 3.3.1 ASHE install with magisk patched.
I still on stock rom with magisk. I tried to backup using twrp. When backing up system image(about 6 gb), it failed.
I am manage to backup others like modem, recovery and others.
What should I do to backup system?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NEMESIS Kernel is the world first N10 and S10 Kernel with Magisk inside! So no patched recovery and no button combo is needed!
You are NOT allowed to use any part of the tweaks files, scripts, propriate Apps or what ever of this Rom without my permission!
Kernel Feature:
- Kernel can be installed only with my TWRP and not with other one since busybox support in twrp its needed!
- All Samsung Security are disabled
- Moro Sound module
- Wakeblocker by boeffla with a base blacklist inside (thx to @corsicanu for the list)
- Build in Magisk (no patched recovery and no button combo is needed!)
1) Put the zip file in your SD Card
2) Reboot in Recovery Mode (TWRP)
3) Install the Kernel
4) Press Reboot System and enjoy
V2.0
-Magisk update dont works! so dont try to update it in magisk manager. i will update it all time on new official magisk releases
V2.0
-Kernel works only on N10, N10+, N10 5G, N10+ 5G, S10e, S10, and S10+!
3.0 (03.01.2020)
- Updated Magisk to V20.2
2.0 (21.10.2019)
- Updated to N10/S10 BSKO/BSL7 source code
- Updated Magisk to 20.1
1.0 (21.10.2019) (Never Released on xda)
-First Build for telegram group for test the kernel
V2.0
My Synology NAS:NEMESIS KERNEL 2.0 DOWNLOAD
Credits:
Samsung for the S10 BSKO kernel source......
@corsicanu for wakeblocker blacklist
@boeffla for wackeblocker
@morogoku for morosound module
Kernel Source
XDA:DevDB Information
[KERNEL]NEMESIS KERNEL N10 S10, Kernel for the Samsung Galaxy S10
Contributors
geiti94
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 2.0
Stable Release Date: 2019-12-15
Created 2019-12-15
Last Updated 2020-01-03
great job!
@geiti94
Do you know of any showstoppers running this on LOS17 on S10? Don't got it with me, so cannot try ATM.
Keule-T said:
@geiti94
Do you know of any showstoppers running this on LOS17 on S10? Don't got it with me, so cannot try ATM.
Click to expand...
Click to collapse
i dont use los so i dont know if he works on it.
geiti94 said:
i dont use los so i dont know if he works on it.
Click to expand...
Click to collapse
All right, will try it later & report.
What rom can I use with this kernel?
Yan.M said:
What rom can I use with this kernel?
Click to expand...
Click to collapse
all android Q roms. but when they patched services.jar on reboot he will boot in recovery. for use the phone again normal like it was on n9 s9 etc you need a unpatched services.jar
oh my god thanks man big man thanks
carhd mod android 10 not work kernel flash kernel complate no kernel
@geiti94 Could you add battlery idle mode (it allows the device to draw power directly from the external power supply when charging is paused) support in the next release? It would be a great feature to have.
Has_anDroid said:
carhd mod android 10 not work kernel flash kernel complate no kernel
Click to expand...
Click to collapse
read what is here. the kernel flash only with my twrp. when you have an other twrp he will not work
oh my god reboot system kernel works reboot recovery kernel not work thanks
I can't get it to boot for some reason. What I do is:
1. Flash G975FXXU3BSKO,
2. Flash TWRP,
3. Format /data,
4. Flash kernel (tried with and without multidisabler),
5. Reboot system.
Can't get past Samsung logo.
Vatt`ghern said:
I can't get it to boot for some reason. What I do is:
1. Flash G975FXXU3BSKO,
2. Flash TWRP,
3. Format /data,
4. Flash kernel (tried with and without multidisabler),
5. Reboot system.
Can't get past Samsung logo.
Click to expand...
Click to collapse
you need to flash the disabler that is in twrp download folder too
my device is 975F, me too. tried several times
Stock pure
Stock patched
Beyond rom
Always stuck at samsung logo i couldnt pas the logo secreen
geiti94 said:
you need to flash the disabler that is in twrp download folder too
Click to expand...
Click to collapse
Unfortunately this solution doesn't work. I'm definitely not flashing newbie, I tried every possible combination including the one you provided but I'm still stuck on Samsung logo.
I don't normally use XDA, but I just wanted to create an account to point out I had the same issues as well. Couldn't boot past the Samsung logo, the device was constantly stuck in a bootloop. I've since given up and reverted back to stock.
No SIM Card detected on S10e
Hi,
I've installed TWRP and the then kernel. The initial bootup was stuck at the Samsung logo. Subsequent bootups work fine.
After installing Magisk Manager, I could install AdAway and enable it. Also Titanium Backup detects 'root'. So far, so good.
Good job. Thanks !
But, my SIM card is not detected. SIM Card Manager says 'No SIM Card'. I tried reinserting it, but that did not help.
Any help / hints are appreciated.
Can't connect to 5G Wifi on beyondrom and magisk is throwing a sqlite error so nothing is detecting root
Vatt`ghern said:
Unfortunately this solution doesn't work. I'm definitely not flashing newbie, I tried every possible combination including the one you provided but I'm still stuck on Samsung logo.
Click to expand...
Click to collapse
ne0__ said:
my device is 975F, me too. tried several times
Stock pure
Stock patched
Beyond rom
Always stuck at samsung logo i couldnt pas the logo secreen
Click to expand...
Click to collapse
dokkanest said:
I don't normally use XDA, but I just wanted to create an account to point out I had the same issues as well. Couldn't boot past the Samsung logo, the device was constantly stuck in a bootloop. I've since given up and reverted back to stock.
Click to expand...
Click to collapse
and i say that again. first of all for flash the kernel my twrp is needed. second thing the disabler in my download link of twrp is needed to be used since the multidisabler by ian creates only problems on s10 etc with custom kernel and @ambasadii can confirm that too. ians multidisabler = bootloop on custom kernels