Team Win Recovery Project 3.3.1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Exynos ONLY.
In NO way it is compatible with Snapdragon variants including but not limited to American(U/A/T/P/V), Chinese(0/8/6), Hong Kong(0), Japanese(SC-*), Canadian(W) variants.
Special Notes:
1. DON'T FORGET TO ENABLE "OEM UNLOCK" (located in Developers options).
2. KNOX will be tripped once you flashed custom binaries to your phone.
(Your warranty may be voided. However this may not affect you if your country forces Samsung to provide hardware warranty regardless of software status.)
3. Samsung Firmware OTA (aka System Updates) will no longer work once you flashed custom binaries.
(You can flash custom ROMs if you want to keep the OS up-to-date.)
4. All apps that use KNOX like Samsung pay, Secure Folder and maybe more will no more work
Download: Note 10(Exynos variants - N970/971/975/976/N/F/B)
Download
Sources:
TWRP Tree and kernel source
Changelog:
15.12.2019
- Updated TWRP for Android 10.0
- From now on no more Magisk Prepatched images (if you need it patch it byself or flash my kernel where patched recovery is not needed)
22.09.2019
-Reverted MTP Changes from last build since for some mtp dont worked in system
21.09.2019
- Fixed the bug that mtp dont worked any more on TWRP when usb cable got disconnected and reconnected
- Modded Kernel for have MTP in TWRP, Samsung Roms and GSI roms (for GSI Roms flash GSI_MTP_ENABLER.zip)
- Reverted FFS MTP changes since new way is more stable
14.09.2019
- Fixed MTP using FFS_MTP in recovery (Thx to @bigbiff for add FFS MTP support on TWRP 3.3.0. FFS_MTP dont corrupts large files like the mtp used by samsung in the roms)
- Removed File Based backups because the phone refuses to boot from filebased backups since they breaks the rootfs
27.08.2019
-Initial Release
Bugs:
-No one
Telegram Group
https://t.me/twrp_n10
XDA:DevDB Information
[RECOVERY] TWRP for Galaxy Note 10 (Exynos), Kernel for the Samsung Galaxy Note 10
Contributors
geiti94
Kernel Special Features:
Version Information
Status: Stable
Stable Release Date: 2019-08-27
Created 2019-08-27
Last Updated 2019-12-15
Guide:
Go to Developer settings and enable oem unlock
power off the device and boot in download mode with power + vol down buttons and plug in the usb (make sure usb cable is connected to the pc)
in download mode you see the long press vol up option for unlock bl
unlock the bootloader (that will wipe your device so be sure you made a backup of your data)
after bootloader unlock boot up the phone and make sure it is connected to the internet or he triggers rmm prenormal
setup the phone without google account etc
reboot in download mode and flash twrp tar for your device with odin in the AP field (if you want to patch twrp byself patch the downloaded tar in magisk manager. patched tar is in downloads folder after patch)
hold vol up + power button while odin is flashing until you are in twrp.
format data in twrp
flash the disabler that is on TWRP download link
flash my kernel avaiable here
press reboot to system in twrp.
so since i am not all the time here on xda here is a telegram group link. use it for report bugs etc since i dont read all the time the complete thread here https://t.me/twrp_n10
so multidisabler is updated to v2 and stock rom boots again normaly sammy added 2 more encryption in the n10 that needed to get disabled
Magisk Patched builds are now uploaded too for the one that dont wants to patch byself
Great work! Stuck with the snapdragon hopefully something pops up for us.
Thanks! For some reason it doesn't detect my sim after flashing this. Anyone else have this issue?
I've got root working fine but no TWRP yet
is it once rooted there is no way to get back Samsung pay ?
Also I root my phones only for Ads away for youtube app and youtube app being able to play in the background with screen off
Is there any ways we can have these without rooting ?
bboyalanleung123 said:
is it once rooted there is no way to get back Samsung pay ?
Also I root my phones only for Ads away for youtube app and youtube app being able to play in the background with screen off
Is there any ways we can have these without rooting ?
Click to expand...
Click to collapse
Easy, just Pay for premium YouTube
bboyalanleung123 said:
is it once rooted there is no way to get back Samsung pay ?
Also I root my phones only for Ads away for youtube app and youtube app being able to play in the background with screen off
Is there any ways we can have these without rooting ?[/QUOTE
Youtube vance
Click to expand...
Click to collapse
No root needed for that
ahno banaag said:
bboyalanleung123 said:
is it once rooted there is no way to get back Samsung pay ?
Also I root my phones only for Ads away for youtube app and youtube app being able to play in the background with screen off
Is there any ways we can have these without rooting ?[/QUOTE
Youtube vance
Click to expand...
Click to collapse
If you root your phone just for you tube ad away you don't need. Just install you tube vanced for not rooted phone and you good to go ?
Click to expand...
Click to collapse
Gilad.i said:
ahno banaag said:
If you root your phone just for you tube ad away you don't need. Just install you tube vanced for not rooted phone and you good to go
Click to expand...
Click to collapse
Don't forget to install micro g with YouTube vanced too.
I used to root just for adaway and YouTube mods, but with ad guard and YouTube vanced I feel I no longer need to root my devices.
Click to expand...
Click to collapse
nvm
So ASHE sources are out. Today after work i will upload ASHE builds for all 4 modells
So new builds are uploaded and note 10+ bootloop issue is fixed (magisk manager corrupted me recovery.img on last builds)
so today again a big update will be here and thats twrp with working mtp in system and recovery
so new builds with working mtp are uploaded
geiti94 said:
Guide:
......
7. reboot in download mode and flash the magisk prepatched tar for your device with odin in the AP field (if you want to patch twrp byself download unpatched tar and select it in magisk manager. patched tar is in downloads folder after patch)
.......
9. flash the multidisabler zip by ian in twrp
........
Click to expand...
Click to collapse
Hello,
I hope you're fine sir,
I just got my Note 10 plus and about to root it,
However, I am a bit lost when you said magisk prepatched and unpatched, what is the difference...?
Also, for the multidisabler , there are formatting steps, so should I do your steps and do the multidisabler thread steps, or yours are enough...?
I just want a perfect flash, I had a terrible experience with my Note 9 unfortunately due to misunderstanding the steps...:crying:
For now, I'll be backing up and completing all the steps required before I move on the new phone...
I do hope you or anyone else sees this and guides me through...:fingers-crossed:
Bless you and all developers and helpers :good::angel:
SPMelly said:
Thanks! For some reason it doesn't detect my sim after flashing this. Anyone else have this issue?
I've got root working fine but no TWRP yet
Click to expand...
Click to collapse
I have the same problem, I have magisk and TWRP but it doesn't detect sim. did you find a solution?
SPMelly said:
Thanks! For some reason it doesn't detect my sim after flashing this. Anyone else have this issue?
I've got root working fine but no TWRP yet
Click to expand...
Click to collapse
Okay. I have solved it by flashing the original firmware downloaded from Sam mobile, after that I repeated the steps but I changed the AP file since I had downloaded the one from N976, download the correct ones for N975 and it was fixed. I already recognized the SIM
Help, cant backup the system image.
Hi, i need some help.
I had n975 and twrp 3.3.1 ASHE install with magisk patched.
I still on stock rom with magisk. I tried to backup using twrp. When backing up system image(about 6 gb), it failed.
I am manage to backup others like modem, recovery and others.
What should I do to backup system?
Related
[ROM] Stock Rom 9.0 Flash and Repair [Full] @XDAfriends hello my friends
New Update Stock is disponible in Sammobile.com
https://www.sammobile.com/firmwares/
Version Android 8.1 e 9.0
Build date Mon, Jul 2019 12:24:39 +0700
All variantes J730G / F / GM / K / FM update
Install and enjoy your new Samsung update for j730x
[Flash]
To Flash or Repair your original system
1. Download Samsung drivers
2. Download Odin
3. Download your firmware ROM Official
4. Power Off your mobile J7
5. Restart Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
6. Install Samsung Drivers
7. Connect Your phone with USB cable to PC
8. Open Odin and Add the firmware file to AP / PDA
9. Select too CP partition in the firmware folder
10. Select too CSC partition in the firmware folder
11. Select too Userdata partition in the firmware folder
12. Click the start button, sit back and wait few minutes
13. This method reinstall your rom to original state
[Recomendation]
Install Your stock 9.x or Install 9.x Custom Stock
Install TWRP
Install Root Magisk
Install Kernel Helios 3.x
[Information]
About Odin details - This informations is very usefull
According to this XDA-Developers forum post and this Droidguiding article:
BL stands for bootloader
AP represents the system partition, under previous Odin versions, this was called "PDA"
CP represents your modem
CSC stands for Consumer Software Customization, this specifies the features your Android device gets according to its geographical location and carrier
Download Odin v3.13.1
https://www.filesbeast.net/download/1/Odin 3.13.1.zip
Servers
https://www.stockrom.net/samsung
Press F3 and search your model
https://www.sammobile.com/firmwares/
J730G
https://www.sammobile.com/firmwares/galaxy-j7-pro/SM-J730G/
J730F
https://www.sammobile.com/firmwares/galaxy-j7-pro/SM-J730F/
J730GM
https://www.sammobile.com/firmwares/galaxy-j7-pro/SM-J730GM/
J730FM
.https://www.sammobile.com/firmwares/galaxy-j7-pro/SM-J730FM/
Search your model on page
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What file of the 5 that come must be put in the box USERDATA?
Thank you
ismago said:
What file of the 5 that come must be put in the box USERDATA?
Thank you
Click to expand...
Click to collapse
you do not need to put anything in this box, when unpacking, come 5 files plus you will only use 4, in the CSC box you use HOMECSC.
NathyAndrade said:
you do not need to put anything in this box, when unpacking, come 5 files plus you will only use 4, in the CSC box you use HOMECSC.
Click to expand...
Click to collapse
Ok. Thank you
I have followed all the steps and now the problem I have is that it does not let me root or install TWRP.
Previously I had Root done and installed TWRP and it worked correctly.
When I try to root with Odin, the installation does it correctly, but when I restart it I get a black screen that tells me the following.
Verification error
Can not restart the device. Error to
verify integrity. It is necessary to restore
the device to the default settings of
factory. This will delete all your data.
RESTORE
And if I want to install TWRP it is also installed correctly, but when it is restarted, it remains in a loop with the SAMSUNG screen and constantly restarts.
If I do not root or install TWRP the device boots and works properly.
Do you know what can happen to him?
Thank you so much
Hello,
Odin's link is bad.
Should be:
https://dl.sammobile.com/Odin3-v3.13.1.zip
not very clear: you don't say anything about the BL file or the options for Odin
ismago said:
I have followed all the steps and now the problem I have is that it does not let me root or install TWRP.
Previously I had Root done and installed TWRP and it worked correctly.
When I try to root with Odin, the installation does it correctly, but when I restart it I get a black screen that tells me the following.
Verification error
Can not restart the device. Error to
verify integrity. It is necessary to restore
the device to the default settings of
factory. This will delete all your data.
RESTORE
And if I want to install TWRP it is also installed correctly, but when it is restarted, it remains in a loop with the SAMSUNG screen and constantly restarts.
If I do not root or install TWRP the device boots and works properly.
Do you know what can happen to him?
Thank you so much
Click to expand...
Click to collapse
I using root normaly steps
1. Access onfiguration and developer options
2. Select - unlock by oem
3. Reboot in stock recovery
4. Wipe and factory reset
5. Reboot in download mode
6. Flash twrp and reboot in twrp directly
7. Flash supersu 2.82 and root is perfectly
My iPhone is j730g and root is ok
Forget about supersu and install magisk instead. Follow the steps here: https://forum.xda-developers.com/ga...-3-1-1-1-j7-pro-sm-j730f-g-gm-t3662621/page14
arwandar said:
not very clear: you don't say anything about the BL file or the options for Odin
Click to expand...
Click to collapse
Read first post about BT CP CSC and AP details
New OS upgrade for j730xx
hacker812c said:
BL option no necessary, the BL is ok
i no rewrite my bootloader
The version is the same
Thanks
Click to expand...
Click to collapse
@NathyAndrade hello my friend
New update stock is disponible in Sammobile.com
https://www.sammobile.com/firmwares/
Version Android 7.0
Changelist 13203669
Build date Mon, 12 Mar 2018 13:25:39 +0000
Security Patch Level 2018-03-01
Product code All variants
PDA J730GUBU3ARC2
CSC J730GZTO3ARC2
All variantes J730G / F / GM / K / FM update
Install and enjoy your new Samsung update for j730xx
new OS upgrade for j730xx
hacker812c said:
BL option no necessary, the BL is ok
i no rewrite my bootloader
The version is the same
Thanks
Click to expand...
Click to collapse
@NathyAndrade hello my friend
New update stock is disponible in Sammobile.com
https://www.sammobile.com/firmwares/galaxy-j7-pro/SM-J730G/ZTO/download/J730GUBU3ARC2/214163/
All variantes J730G / F / GM / K / FM update
Install and enjoy your new Samsung update for j730xx
arwandar said:
not very clear: you don't say anything about the BL file or the options for Odin
Click to expand...
Click to collapse
News my friends around the world
The new updates 7.1.1 for J730xx
https://samsung-firmware.org/model/SM-J730G/
Perhaps the biggest change introduced in 7.1 is long press on app icons to reveal app-specific-action shortcuts. Kind of what Apple does via 3d touch. Interestingly those actions can be moved to create new separate icons.
Nougat 7.1.1 for J730G region Brazil Oi
https://samsung-firmware.org/model/SM-J730G/region/ZTR/
hacker812c said:
News my friends around the world
The new updates 7.1.1 for J730xx
https://samsung-firmware.org/model/SM-J730G/
Perhaps the biggest change introduced in 7.1 is long press on app icons to reveal app-specific-action shortcuts. Kind of what Apple does via 3d touch. Interestingly those actions can be moved to create new separate icons.
Nougat 7.1.1 for J730G region Brazil Oi
https://samsung-firmware.org/model/SM-J730G/region/ZTR/
Click to expand...
Click to collapse
What are you talking about? All these roms are Android 7.0.
Greight said:
What are you talking about? All these roms are Android 7.0.
Click to expand...
Click to collapse
Hello Greight Thanks for reply
Really until yesterday the site was with the roms available. thanks for the feedback
does this way allow me keeping updating OTA ?
eraganxs said:
does this way allow me keeping updating OTA ?
Click to expand...
Click to collapse
Yes,
Absolutely the rewriting of the original rom returns the system update support
Re flash your rom totaly and receive updates from samsung
hacker812c said:
Hello Greight Thanks for reply
Really until yesterday the site was with the roms available. thanks for the feedback
Click to expand...
Click to collapse
No, there wasn't bro. I'm more or less obsessed with updates and check there regularly. Up till now, all the roms have been 7.0.
hacker812c said:
Yes,
Absolutely the rewriting of the original rom returns the system update support
Re flash your rom totaly and receive updates from samsung
Click to expand...
Click to collapse
Thanks bro
FAQ. about Android 7.0 encryption
Many users still do not understand why they try to root in
Android 7.0 and go through problems like bootloop
One of the causes of this problem is the encryption of Nougat android 7.x
Recomendations for Root or TWRP
Boot your device to RECOVERY [Stock] mode then select
FACTORY RESET. THIS WILL WIPE YOUR DEVICE AND YOU WILL LOSE ALL DATA.
(This procedure is required to remove encryption or your device won't boot)
From RECOVERY, IMMEDIATELY Boot your device to DOWNLOAD mode then
connect your USB cable. (DO NOT LET YOUR DEVICE REBOOT NORMALLY
OR YOUR DEVICE WILL RE-ENCRYPT
After this point flash Recovery TWRP and open TWRP immediately
and flash Supersu 2.82.zip [Recomended]
At this point your root is perfectly
-------------------------//--------------------------
About Odin details - This informations is very usefull
According to this XDA-Developers forum post and this Droidguiding article:
BL stands for bootloader
AP represents the system partition; under previous Odin versions, this was called "PDA"
CP represents your modem
CSC stands for Consumer Software Customization, this specifies the features your Android device gets according to its geographical location and carrier
Team Win Recovery Project 3.3.1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Exynos ONLY.
In NO way it is compatible with Snapdragon variants including but not limited to American(U/A/T/P/V), Chinese(0/8/6), Hong Kong(0), Japanese(SC-*), Canadian(W) variants.
Special Notes:
1. DON'T FORGET TO ENABLE "OEM UNLOCK" (located in Developers options).
2. KNOX will be tripped once you flashed custom binaries to your phone.
(Your warranty may be voided. However this may not affect you if your country forces Samsung to provide hardware warranty regardless of software status.)
3. Samsung Firmware OTA (aka System Updates) will no longer work once you flashed custom binaries.
(You can flash custom ROMs if you want to keep the OS up-to-date.)
4. All apps that use KNOX like Samsung pay, Secure Folder and maybe more will no more work
Download: S10(Exynos variants - G970/973/975/F/N)
Download
Sources:
TWRP Tree and kernel source
Changelog:
15.12.2019
- Updated TWRP for Android 10.0
- From now on no more Magisk Prepatched images (if you need it patch it byself or flash my kernel where patched recovery is not needed)
07.10.2019
-Updated TWRP Kernel to Full ASIG Base
-Dex On PC will now work
23.09.2019
-Updated TWRP for boot on ASIG Bootloader and for not Break Camera on ASIG
-Dex On PC will not work for the moment but i will fix that soon
-Use ASIG TWRP Builds only when you are on a ASIG rom
22.09.2019
-Reverted MTP Changes from last build since for some mtp dont worked in system
21.09.2019
- Fixed the bug that mtp dont worked anymore on TWRP when usb cable got disconnected and reconnected
- Modded Kernel for have MTP in TWRP, Samsung Roms and GSI roms (for GSI Roms flash GSI_MTP_ENABLER.zip)
- Reverted FFS MTP changes since new way is more stable
- Fixed format data issue (was my fault)
14.09.2019
- Rebased Kernel to ASH6 base
- Added Busybox to twrp because enought devs asked me that since toybox is too limited
- Fixed all Bugs from initial release
- Fixed MTP using FFS_MTP in recovery (Thx to @bigbiff for add FFS MTP support on TWRP 3.3.0. FFS_MTP dont corrupts large files like the mtp used by samsung in the roms)
14.04.2019
- Initial Release
Bugs:
-No one
Telegram Group
https://t.me/twrp_n10
Note that after flashing this twrp other build not made by me will have lockscreen unlock issues
XDA:DevDB Information
[RECOVERY][UNOFFICIAL][ASIG] TWRP for Galaxy S10e/S10/S10+, Kernel for the Samsung Galaxy S10
Contributors
geiti94
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 4.0
Stable Release Date: 2019-09-23
Created 2019-04-07
Last Updated 2019-12-15
Installation Guide
Guide:
Go to Developer settings and enable oem unlock
power off the device and boot in download mode with power + vol down buttons and plug in the usb (make sure usb cable is connected to the pc)
in download mode you see the long press vol up option for unlock bl
unlock the bootloader (that will wipe your device so be sure you made a backup of your data)
after bootloader unlock boot up the phone and make sure it is connected to the internet or he triggers rmm prenormal
setup the phone without google account etc
reboot in download mode and flash twrp tar for your device with odin in the AP field (if you want to patch twrp byself patch the downloaded tar in magisk manager. patched tar is in downloads folder after patch)
hold vol up + power button while odin is flashing until you are in twrp.
format data in twrp
flash the disabler that is on TWRP download link
flash my kernel avaiable here
press reboot to system in twrp.
Thank you!
Thank you!Thank you!
If I'm already rooted with Magisk do I still need to perform factory reset and so after installing the tar file?
jimbo77 said:
If I'm already rooted with Magisk do I still need to perform factory reset and so after installing the tar file?
Click to expand...
Click to collapse
yes because you have data encryption enabled and twrp dont have support for it
geiti94 said:
yes because you have data encryption enabled and twrp dont have support for it
Click to expand...
Click to collapse
Alright will give it a go. I'm just gonna backup my stuff
jimbo77 said:
Alright will give it a go. I'm just gonna backup my stuff
Click to expand...
Click to collapse
Anyone know if you could just decript it then flash?
Is it working?
reboot system...bootlop logo.
Does this include the ATT US galaxy s10???
---------- Post added at 07:57 AM ---------- Previous post was at 07:46 AM ----------
3dLyric said:
Does this include the SM-G973U
Click to expand...
Click to collapse
3dLyric said:
Does this include the ATT US galaxy s10???
---------- Post added at 07:57 AM ---------- Previous post was at 07:46 AM ----------
3dLyric said:
Does this include the SM-G973U
Click to expand...
Click to collapse
Only exynos will work for now, us snapdragon have locker bootloader, maybe never will have twrp.
Click to expand...
Click to collapse
help cannot bootphone into twrp or downlodmode tried three button combination no sucssees only phone blinks in coution messege
saxena1 said:
help cannot bootphone into twrp or downlodmode tried three button combination no sucssees only phone blinks in coution messege
Click to expand...
Click to collapse
Attach your phone to a computer and retry, it's a known issue
delete
bon0123456789 said:
reboot system...bootlop logo.
Click to expand...
Click to collapse
Have you tried doing reboot recovery from TWRP?
In the OP, it says ASC firmware base. Does that mean it only works on devices with ASC firmware base? If so how do I check that?
geiti94 said:
yes because you have data encryption enabled and twrp dont have support for it
Click to expand...
Click to collapse
I disabled encryption when installed Magisk.
Still need factory reset?
Ndaoud360 said:
In the OP, it says ASC firmware base. Does that mean it only works on devices with ASC firmware base? If so how do I check that?
Click to expand...
Click to collapse
Hi
I think he's talking about the last
First was ASBA and last is ASCA ^^
Step 9. hold vol up+ bixby+power until you are twrp, doesnt work for me. I have tried holding the buttons for more than 1 minute, holding vol up + bixby plugging usb, holding vol up and bixby only, it just stays on download mode. I can only press vol down + power to reboot, and I cant boot to system or recovery after that, I have to flash stock with odin and start over.
Any ideas?
Billion Capture Plus
Flipkart phone with SD625
There's also a global version now for only 65€ that can be found via Chinese resellers which is a bargain.
According to 4pda the Bootloader seems unlocked since a user was alble to flash mido TWRP with no working touchscreen unfortunately.
The phone has been updated to Oreo with Camera2api enabled which makes Gcam ports work well
Unfortunately there no official downloadable firmware, unbrick guides or custom ROMs, which is surprising considering the great custom ROM community India has
Gcam with everything working except Slowmo:
*Works only on Android 7.1.2
https://f.celsoazevedo.com/file/gcamera/NoHex_MGC_6.1.021_xcam_5_beta20.apk
According to a user at 4pda forums mido TWRP can be flashed but there's no working touchscreen.
Since there's no way to find the Oreo update zip file we can't get the display driver yet
Be careful - unlocking the boot on this device leads to impossibility of OTA update to 8.1. (status 7 in recovery). Fought with this phone for almost a month, and no lucky chance to catch the update in "mid-air"(while it's being downloaded) or make the updater's apk to download the firmware in other place instead of data (owner: root). Still going for a vicious circle: we don't have root to pull the OTA update out of the phone to make a custom recovery... And we don't have TWRP to root it.
We didn't exactly flash mido TWRP, just booted it. Hardware buttons are working though, but again we don't have CWM.
Dance4Life said:
Be careful - unlocking the boot on this device leads to impossibility of OTA update to 8.1. (status 7 in recovery). Fought with this phone for almost a month, and no lucky chance to catch the update in "mid-air"(while it's being downloaded) or make the updater's apk to download the firmware in other place instead of data (owner: root). Still going for a vicious circle: we don't have root to pull the OTA update out of the phone to make a custom recovery... And we don't have TWRP to root it.
We didn't exactly flash mido TWRP, just booted it. Hardware buttons are working though, but again we don't have CWM.
Click to expand...
Click to collapse
I'm not Russian so I'm using Google translate to understand .
Should I upgrade to Oreo any downsides?
Can you upload the Google camera config files?
How can we make twrp work?
Isn't there any firmware dump tool for Qualcomm phones?
If we can get the stock boot.img we can have root without TWRP
Also has anyone tried flashing treble ROMs via fast boot?
Edit: Found this tutorial
What I wanna say is: Dumping the stock boot.img
Modify it with root via the Magisk app
Flash the modified boot.img in fast boot in order to have root
adaa1262 said:
I'm not Russian so I'm using Google translate to understand .
Should I upgrade to Oreo any downsides?
Can you upload the Google camera config files?
How can we make twrp work?
Isn't there any firmware dump tool for Qualcomm phones?
If we can get the stock boot.img we can have root without TWRP
Aldo has anyone tried flashing treble ROMs via fast boot?
Edit: Found this tutorial
Click to expand...
Click to collapse
Interesting tutorial, but the program in video saves files in unknown format. What do we do with them after we got dump?
1. Oreo update contains one little bug - it slightly interrupts the touchscreen's work. No noticeable in everyday usage, but still having its place. Can't attach the example 'çause I'm newbie here.
2. The only way to build up the TWRP is to get kernel source of stock rom (boot.img). The problem is that we can't pull it out of device - this partition is hidden under "root" privileges.
3. You can dump anything with ADB, but there is no way you see the most important partitions like data, system, boot, recovery and so on.
4. Nope, see second line;
5. No, because the chance to catch a brick (to get an empty device which won't load the system/recovery/adb/fastboot) is too high.
Dance4Life said:
Interesting tutorial, but the program in video saves files in unknown format. What do we do with them after we got dump?
1. Oreo update contains one little bug - it slightly interrupts the touchscreen's work. No noticeable in everyday usage, but still having its place. Can't attach the example 'çause I'm newbie here.
2. The only way to build up the TWRP is to get kernel source of stock rom (boot.img). The problem is that we can't pull it out of device - this partition is hidden under "root" privileges.
3. You can dump anything with ADB, but there is no way you see the most important partitions like data, system, boot, recovery and so on.
4. Nope, see second line;
5. No, because the chance to catch a brick (to get an empty device which won't load the system/recovery/adb/fastboot) is too high.
Click to expand...
Click to collapse
So is there another way ?
Have you discovered anything new?
Also as I said can you upload the Google camera config files?
You can upload them via a PC using the paper clip icon
Also how's the camera quality with Google camera?
adaa1262 said:
So is there another way ?
Have you discovered anything new?
Also as I said can you upload the Google camera config files?
Click to expand...
Click to collapse
So far we can't see another ways to get TWRP or root. Couple of configs (remove space in the end of links):
4pda.ru/forum/index.php?showtopic=944778&view=findpost&p=84721063
4pda.ru/forum/index.php?showtopic=944778&view=findpost&p=85797772
Google Camera works pretty fine, especially on 8.1. But the seventh droid has fancy photos too. Search for the gcam on the 4pda thread, there are some examples of Google Camera photos.
Dance4Life said:
So far we can't see another ways to get TWRP or root. Couple of configs (remove space in the end of links):
4pda.ru/forum/index.php?showtopic=944778&view=findpost&p=84721063
4pda.ru/forum/index.php?showtopic=944778&view=findpost&p=85797772
Google Camera works pretty fine, especially on 8.1. But the seventh droid has fancy photos too. Search for the gcam on the 4pda, there are some examples of Google Camera photos.
Click to expand...
Click to collapse
I don't have a 4pda account so I can't download them
adaa1262 said:
I don't have a 4pda account so I can't download them
Click to expand...
Click to collapse
And I don't have an ability to put them here çause I'm newbie
Dance4Life said:
And I don't have an ability to put them here çause I'm newbie
Click to expand...
Click to collapse
Can you mirror the files to gdrive or mega?
adaa1262 said:
Can you mirror the files to gdrive or mega?
Click to expand...
Click to collapse
Spaces should be removed from the end.
mega.nz/#!enRkXSy J
mega.nz/#!3jJgwIY B
Dance4Life said:
Spaces should be removed from the end.
mega.nz/#!enRkXSy J
mega.nz/#!3jJgwIY B
Click to expand...
Click to collapse
File no longer available
If i copy each it will say i neef a decrypt key
adaa1262 said:
File no longer available
If i copy each it will say i neef a decrypt key
Click to expand...
Click to collapse
So complicated... I have chosen the option "link without key". But here:
3hujYNerqEGcOlRaiaz5aXMM18FgiJcPGqTwVsOqkhw
VhdD7GPKLjFeTDvjcH2dW2b1knekeHkmPo6Hh11zSKM
XML Files for Gcam taken from 4pda forums
Thanks to @Dance4Life for uploading
Any Custom Recovery for Billion Capture Plus??
Is there any working Custom Recovery available for Billion Capture Plus (4GB+64GB model). I have tried some available recovery from TWRP and OrangeFox and it stuck in Boot screen where it just show "Billion logo and powered by Android". In this mode if I connect to my PC and using fastboot I can still access mobile and whatever I try to flash it is not working.
Any help in getting Custom Recovery or Original Bootloader so that I can use my mobile will be helpful for me.
itsKekC said:
Is there any working Custom Recovery available for Billion Capture Plus (4GB+64GB model). I have tried some available recovery from TWRP and OrangeFox and it stuck in Boot screen where it just show "Billion logo and powered by Android". In this mode if I connect to my PC and using fastboot I can still access mobile and whatever I try to flash it is not working.
Any help in getting Custom Recovery or Original Bootloader so that I can use my mobile will be helpful for me.
Click to expand...
Click to collapse
Dev on 4pda forums are still working on it
Anyone got enough language skills to translate some 4pda instructions into english? Ofc we got google translator, but personally I would feel more secure having those steps in english.
adaa1262 said:
XML Files for Gcam taken from 4pda forums
Thanks to @Dance4Life for uploading
Click to expand...
Click to collapse
File already gone?
Can someone please re-upload it?
UPDATE
Working Gcams for
Code:
Android 7.1.2
Install [URL="NoHex_MGC_6.1.021_xcam_5_beta20.apk"]http://https://f.celsoazevedo.com/file/gcamera/NoHex_MGC_6.1.021_xcam_5_beta20.apk[/URL]this apk
Download the NoHex_MGC_6.1.021_xcam_5_beta20. xml file from [URL="here"]http://mega.nz/#!enRkXSyJ[/URL] with this decryption key 3hujYNerqEGcOlRaiaz5aXMM18FgiJcPGqTwVsOqkhw
[I]Everything is working except slowmo[/I]
Code:
Android 8 Oreo
[URL="MGC_6.1.021_FINAL_V1a_A8.1+.apk"]http://https://androidfilehost.com/?fid=11410963190603855055[/URL]
How to apply config files to google camera
Open Google Camera and save a random config and get to /Gcam/config and paste the xml
Open Google Camera again and tap on the bottom between the shutter button like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Choose the xml and save
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NEMESIS Kernel is the world first N10 and S10 Kernel with Magisk inside! So no patched recovery and no button combo is needed!
You are NOT allowed to use any part of the tweaks files, scripts, propriate Apps or what ever of this Rom without my permission!
Kernel Feature:
- Kernel can be installed only with my TWRP and not with other one since busybox support in twrp its needed!
- All Samsung Security are disabled
- Moro Sound module
- Wakeblocker by boeffla with a base blacklist inside (thx to @corsicanu for the list)
- Build in Magisk (no patched recovery and no button combo is needed!)
1) Put the zip file in your SD Card
2) Reboot in Recovery Mode (TWRP)
3) Install the Kernel
4) Press Reboot System and enjoy
V2.0
-Magisk update dont works! so dont try to update it in magisk manager. i will update it all time on new official magisk releases
V2.0
-Kernel works only on N10, N10+, N10 5G, N10+ 5G, S10e, S10, and S10+!
3.0 (03.01.2020)
- Updated Magisk to V20.2
2.0 (21.10.2019)
- Updated to N10/S10 BSKO/BSL7 source code
- Updated Magisk to 20.1
1.0 (21.10.2019) (Never Released on xda)
-First Build for telegram group for test the kernel
V2.0
My Synology NAS:NEMESIS KERNEL 2.0 DOWNLOAD
Credits:
Samsung for the S10 BSKO kernel source......
@corsicanu for wakeblocker blacklist
@boeffla for wackeblocker
@morogoku for morosound module
Kernel Source
XDA:DevDB Information
[KERNEL]NEMESIS KERNEL N10 S10, Kernel for the Samsung Galaxy S10
Contributors
geiti94
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 2.0
Stable Release Date: 2019-12-15
Created 2019-12-15
Last Updated 2020-01-03
great job!
@geiti94
Do you know of any showstoppers running this on LOS17 on S10? Don't got it with me, so cannot try ATM.
Keule-T said:
@geiti94
Do you know of any showstoppers running this on LOS17 on S10? Don't got it with me, so cannot try ATM.
Click to expand...
Click to collapse
i dont use los so i dont know if he works on it.
geiti94 said:
i dont use los so i dont know if he works on it.
Click to expand...
Click to collapse
All right, will try it later & report.
What rom can I use with this kernel?
Yan.M said:
What rom can I use with this kernel?
Click to expand...
Click to collapse
all android Q roms. but when they patched services.jar on reboot he will boot in recovery. for use the phone again normal like it was on n9 s9 etc you need a unpatched services.jar
oh my god thanks man big man thanks
carhd mod android 10 not work kernel flash kernel complate no kernel
@geiti94 Could you add battlery idle mode (it allows the device to draw power directly from the external power supply when charging is paused) support in the next release? It would be a great feature to have.
Has_anDroid said:
carhd mod android 10 not work kernel flash kernel complate no kernel
Click to expand...
Click to collapse
read what is here. the kernel flash only with my twrp. when you have an other twrp he will not work
oh my god reboot system kernel works reboot recovery kernel not work thanks
I can't get it to boot for some reason. What I do is:
1. Flash G975FXXU3BSKO,
2. Flash TWRP,
3. Format /data,
4. Flash kernel (tried with and without multidisabler),
5. Reboot system.
Can't get past Samsung logo.
Vatt`ghern said:
I can't get it to boot for some reason. What I do is:
1. Flash G975FXXU3BSKO,
2. Flash TWRP,
3. Format /data,
4. Flash kernel (tried with and without multidisabler),
5. Reboot system.
Can't get past Samsung logo.
Click to expand...
Click to collapse
you need to flash the disabler that is in twrp download folder too
my device is 975F, me too. tried several times
Stock pure
Stock patched
Beyond rom
Always stuck at samsung logo i couldnt pas the logo secreen
geiti94 said:
you need to flash the disabler that is in twrp download folder too
Click to expand...
Click to collapse
Unfortunately this solution doesn't work. I'm definitely not flashing newbie, I tried every possible combination including the one you provided but I'm still stuck on Samsung logo.
I don't normally use XDA, but I just wanted to create an account to point out I had the same issues as well. Couldn't boot past the Samsung logo, the device was constantly stuck in a bootloop. I've since given up and reverted back to stock.
No SIM Card detected on S10e
Hi,
I've installed TWRP and the then kernel. The initial bootup was stuck at the Samsung logo. Subsequent bootups work fine.
After installing Magisk Manager, I could install AdAway and enable it. Also Titanium Backup detects 'root'. So far, so good.
Good job. Thanks !
But, my SIM card is not detected. SIM Card Manager says 'No SIM Card'. I tried reinserting it, but that did not help.
Any help / hints are appreciated.
Can't connect to 5G Wifi on beyondrom and magisk is throwing a sqlite error so nothing is detecting root
Vatt`ghern said:
Unfortunately this solution doesn't work. I'm definitely not flashing newbie, I tried every possible combination including the one you provided but I'm still stuck on Samsung logo.
Click to expand...
Click to collapse
ne0__ said:
my device is 975F, me too. tried several times
Stock pure
Stock patched
Beyond rom
Always stuck at samsung logo i couldnt pas the logo secreen
Click to expand...
Click to collapse
dokkanest said:
I don't normally use XDA, but I just wanted to create an account to point out I had the same issues as well. Couldn't boot past the Samsung logo, the device was constantly stuck in a bootloop. I've since given up and reverted back to stock.
Click to expand...
Click to collapse
and i say that again. first of all for flash the kernel my twrp is needed. second thing the disabler in my download link of twrp is needed to be used since the multidisabler by ian creates only problems on s10 etc with custom kernel and @ambasadii can confirm that too. ians multidisabler = bootloop on custom kernels
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
BeyondRom v6.4
Based on Android 13 G98xF(B)XXUHHWED firmware
Supported Devices: G980F, G981B, G985F, G986B and G988B
ROM Features
<*>Supported devices: G980F (S20), G981B (S20 5G), G985F (S20+), G986B (S20+ 5G) and G988B (S20 Ultra)</*>
<*>Base OneUI 5.1 Android 13 G98xF(B)XXUHHWED deodex June 2023 patch level</*>
<*>Stock Samsung kernel</*>
<*>CSC features: call recording, camera shutter sound menu, real time network speed in statusbar, etc)</*>
<*>Knox partially removed and ROM light debloated</*>
<*>Screenshots in secure apps allowed</*>
<*>Removed automatic encryption, vaultkeeper services</*>
<*>Few build.prop tweaks</*>
<*>Warning boot screen removed, custom boot animation</*>
<*>Automatic EFS backup</*>
<*>For Safetynet use kdrag0n patch v2.4.x-mod1.x</*>
Not working
<*>Some knox related apps: Samsung Pay, Samsung AutoFill</*>
Changelog v6.4
<*>Updated to latest HWED June 2023 OneUI 5.1 patch level</*>
<*>Kernel patched with magisk canary 26101l</*>
<*>Stock SHealth fix (tbc)</*>
Notes
<*>Install magisk canary 26201 app in TWRP</*>
Credits
- John Wu for Magisk
- Mr. Waehere for CRB kitchen
- corsicanu for S20 TWRP
- aliwaris for incallui mods
- dutchman89 for the new boot animation
- Alan Thomas for sammy disarm script
- LeeXDA18 for some fixes and porting Object remover mod from S23
- Nguyen for back2kill mod
- All testing team
Download Links
G98xFB BR64 HWED Link
Official TWRP thread for S20 Series
Installation procedure
IS MANDATORY TO BE ON A13 AT LEAST HWCG/HWD4/HWED FW BEFORE FLASHING BR 64 !!!
Dirty flash of BR 6.x over any Android 12 will brick your device !!!
0) Backup ALL your important files to PC, ext drives, etc
1) Download and copy the latest BR ROM zip into your external storage or USB stick if you're on stock fw encrypted
2) Download latest stock FW for your phone model using Frija or Samfw and unpack it on your PC
3) Boot in download mode (Vol Up + Vol Down + plug the USB cable connected already to PC) and load up Odin on PC
Don't use USB adapters otherwise you might get issues flashing FW in Odin
Turn off Auto Reboot in Odin
4) Select files BL, AP, CP & HOME_CSC (keep data)
**do not start flash yet
5) Download latest compatible TWRP for your specific device from the official TWRP xda thread (link above), rename it to recovery.img. Download the patched vbmeta.img file from below. Using 7Zip app add the 2 files (recovery.img and vbmeta.img) into a .tar file.
6) Add the above twrp + vbmeta patched.tar file into the USERDATA slot in Odin
7) Uncheck the auto reboot option in Odin and start the flashing
8) When flashing completes (keep usb plugged in !!!), hold Vol Down + Power buttons and then as soon as the screen goes black hold Vol Up + Power buttons to boot to recovery
*be warned first time you boot into recovery it will initialize and then reboot so just keep the buttons Vol Up + Power buttons pressed longer
**if you boot in stock FW, your data will be encrypted and you'll need to wipe your data before flashing BR 3.x
9) When boot in TWRP, wipe your data if you're encrypted, flash BR 5.x zip and then reboot to system
10) After the first boot, install Magisk Manager if necessary; when you'll start Magisk Manager for the first time, reply with YES (agree to reboot) after MM have setup your root environment
*after reboot, go to Magisk Manager settings and toggle On Zygisk
10) Enjoy....
1. Backup to PC all your important files: documents, pictures, contacts, SMS, etc. BEFORE starting to flash anything
2. If you have issues booting the ROM, try the clean flash
3. To boot into TWRP you need to use a USB cable connected to PC (same for DL mode) or a USB stick
4. If you like my work, consider buying me a coffee (PayPal link)
Helpful links
S20 series Root and FW upgrade
BeyondROM S20 Telegram chat
PayPal link
Happy flashing good people!
reserved
I've never been first to comment on a thread after the OP, but there's always a first!
Installing anxiously now and will report back with results
Working perfect on G985F. Great work as always Andrei. Thank You!
Impossible to download.
If I have BeyondRom V1.5 installed and have root can I install BeyondRom V2.0 in recovery as dirty instalation? or I have to do all 10 steps as you wrote?
nijoo said:
If I have BeyondRom V1.5 installed and have root can I install BeyondRom V2.0 in recovery as dirty instalation? or I have to do all 10 steps as you wrote?
Click to expand...
Click to collapse
No you should not be able to. And yes follow steps. You need to change your bootloader, modem etc.
Disappointing, I followed your directions to the letter and I have a soft bricked 985f. I have tried to flash 3 times now. I flashed and it goes all the way to pass but then when I try to boot twrp it sits there. Yes I'm plugged in to my pc, even tried multiple cords and ports and clean install, never can get to twrp. Gotta sleep, hopefully it doesn't burn in overnight since I can't shut it off.
I second that. Works perfectly on my 985f
jhr5474 said:
Disappointing, I followed your directions to the letter and I have a soft bricked 985f. I have tried to flash 3 times now. I flashed and it goes all the way to pass but then when I try to boot twrp it sits there. Yes I'm plugged in to my pc, even tried multiple cords and ports and clean install, never can get to twrp. Gotta sleep, hopefully it doesn't burn in overnight since I can't shut it off.
Click to expand...
Click to collapse
Show me the content of the twrp tar you flash
You are great man. Thank you.
Looking forward to install it on my g980f
I used the vmbeta.img and the ianmcd recovery, i made them into a tar with 7zip and I renamed it to recovery.img before combining. I even copied and pasted the name you said to name it. Could we get a link to the correct twrp?
I agree it has to be the twrp, but I got the one mentioned off of telegram the twrp telegram by ian.
that is the twrp i used.
Hi mate
Thx for all of it
i installed on 988B working correctly
By the way, has anyone tried install xposed ?
jhr5474 said:
I used the vmbeta.img and the ianmcd recovery, i made them into a tar with 7zip and I renamed it to recovery.img before combining. I even copied and pasted the name you said to name it. Could we get a link to the correct twrp?
I agree it has to be the twrp, but I got the one mentioned off of telegram the twrp telegram by ian.
View attachment 5158181 that is the twrp i used.
Click to expand...
Click to collapse
I made the mistake of not resetting odin, as soon as I reset odin i was able to flash recovery and then rom, thank you !!!!
Twrp 1a28 BeyondRom 2.0 not installing.
Twrp 1a23 BeyondRom 2.0 smoothly installing.
LENO7 said:
Twrp 1a28 BeyondRom 2.0 not installing.
Twrp 1a23 BeyondRom 2.0 smoothly installing.
Click to expand...
Click to collapse
What do you mean not installing? Get any errors? Many people already installed it.
Any chance someone could pretty please post a link for the Stock FW as well posted here.
The https://samdb.org/firmware/ and https://www.sammobile.com/samsung/galaxy-s20-ultra/firmware/ pages are SOOOOOO slow. Can barely download the files.
AMDPOWERFIST said:
Any chance someone could pretty please post a link for the Stock FW as well posted here.
The https://samdb.org/firmware/ and https://www.sammobile.com/samsung/galaxy-s20-ultra/firmware/ pages are SOOOOOO slow. Can barely download the files.
Click to expand...
Click to collapse
Use Samfirm or Frija. They're super fast
AMDPOWERFIST said:
Any chance someone could pretty please post a link for the Stock FW as well posted here.
The https://samdb.org/firmware/ and https://www.sammobile.com/samsung/galaxy-s20-ultra/firmware/ pages are SOOOOOO slow. Can barely download the files.
Click to expand...
Click to collapse
Hi Dude
you can use this gdrive link its superfast also
Google Drive - Virus scan warning
drive.google.com