I flashed stock firmware onto my phone (the last file on https://firmware.center/firmware/Motorola/Moto Z2 Force/Stock/XT1789-04/) to unbrick my phone using this batch file:
echo off
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system_b system_b.img_sparsechunk.0
fastboot flash system_b system_b.img_sparsechunk.1
fastboot flash oem oem.img
fastboot erase carrier
fastboot erase ddr
fastboot oem fb_mode_clear
pause
fastboot reboot
exit
I was able to successfully boot up the phone but the wifi and mobile data does not work. I cannot turn on the wifi and it does not give me the option to turn on mobile data even when my sim card is inserted. Any ideas on how to fix this would help.
Additional info: It was previously bricked because I deleted app_process32 from system/bin. It worked fine until I also uninstalled systemless xposed. I tried to flash Lineage OS but that just removed TWRP and still put me in a bootloop so then I did what I described above.
I remember the post where you said you had deleted that file, I believe you said you were on TMO. If so, flash this one, it newer than the oreo you flashed. Most likely the downgrade that is causing your problems.
Do a factory reset from stock recovery
I remember the post where you said you had deleted that file, I believe you said you were on TMO. If so, flash this one, it newer than the oreo you flashed. Most likely the downgrade that is causing your problems.
Click to expand...
Click to collapse
Thank you so much! You saved me $375 :')
Hello everyone i tryed to root my moto z2 force using xda tutorials but it didnt work, i unlocked bootloader, so when i installed magisk and recovery twrp didnt start my device, i decided to reinstall stock rom because i read that to recover my device i can do it, i downloaded a telcel firmware for Mexico for moto z2 force but i cant install bootloader with the command: fastboot flash bootloader bootloader.img
and now when i turn on my device it says that i have a diferent operating system and reboot and same message all time, help please
Can you get into fastboot mode if so use uzephi's
https://forum.xda-developers.com/z2-force/how-to/how-to-return-to-stock-sprint-t3694783 return to stock image but use the firmware for your device from here https://mirrors.lolinet.com/firmware/moto/nash/official/
riskyfuture said:
Can you get into fastboot mode if so use uzephi's
https://forum.xda-developers.com/z2-force/how-to/how-to-return-to-stock-sprint-t3694783 return to stock image but use the firmware for your device from here https://mirrors.lolinet.com/firmware/moto/nash/official/
Click to expand...
Click to collapse
i really apreciate your help really i was desperate hahaha, before do this you replyed i was reading a lot abot the problem but not really for moto z2 force and they said that have to install the last firmware with last bootloader to recover, then i did it i downloaded the last https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
then i tryed to flash bootloader and really flashed!!, so i turned on my phone and now works normal i used this commands:
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system_b system_b.img_sparsechunk.0
fastboot flash system_b system_b.img_sparsechunk.1
fastboot flash system_b system_b.img_sparsechunk.2
fastboot flash system_b system_b.img_sparsechunk.3
fastboot flash oem oem.img
fastboot erase cache
fastboot erase carrier
fastboot erase ddr
fastboot reboot
apreciate your help a lot really thx
UPDATE: i have a question. found in your software link the Telcel MX firmware of my moto Z2 force, but if i update from OTA on my actual firmware is the posibility to get brick??, i dont know if install the Telcel firmware because it has Telcel aplications i hate of carrier
Hi, I have bricked my phone when I tried to flash my stockboot en recovery img files. What happens is that everytime I reboot the phone, it automatically reboots to the bootloader. I can access twrp.
I tried to flash stock firmware myself, but I flashed XT1921-3 instead of XT1922-3 because I couldnt find the right version. Nothing changed. I also tried to flash a GSI ROM and nothing changes there as well. Can someone help me out?
I managed to get my hands
You will have to pass the last stock in 9.0 for your G6 play, I did it in mine and I go back I was with an equal problem
i am used this version for my cellphone XT1922-5_ALJETER_RETBR_9.0_PPP29.55-25_cid50_subsidy-DEFAULT_regulatory-XT1922-5-BRAZIL-MANAUS_CFC you used similar version
in fastboot my solucion
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash vendor vendor.img
fastboot flash oem oem.img
fastboot erase cache
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
Worked like a charm for my Xt1922-3 RETEU.
i have a 8.1 custom rom and want to upgrade to pie rom
put i have to change into Official Stock Oreo 8.1.0 first (i think !)
so what should i do
please help
As long as your base firmware is oreo (stock oreo was on your device before you flashed a custom rom) you just need to format system data cache & flash another custom rom
If you want to flash stock firmware just download it and flash it with fastboot commands - there's loads of step by step guides if you Google how but here are the commands
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot oem fb_mode_clear
fastboot reboot
Download firmware from https://mirrors.lolinet.com/firmware/moto/cedric/official/
TheFixItMan said:
As long as your base firmware is oreo (stock oreo was on your device before you flashed a custom rom) you just need to format system data cache & flash another custom rom
If you want to flash stock firmware just download it and flash it with fastboot commands - there's loads of step by step guides if you Google how but here are the commands
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot oem fb_mode_clear
fastboot reboot
Download firmware from https://mirrors.lolinet.com/firmware/moto/cedric/official/
Click to expand...
Click to collapse
sorry but i really dont know if i have oreo as a stock
i think it was nouget as stock
what should i do
and please get me a link how to instal stock rom using ADB
Hatem hesham said:
sorry but i really dont know if i have oreo as a stock
i think it was nouget as stock
what should i do
and please get me a link how to instal stock rom using ADB
Click to expand...
Click to collapse
You don't use adb to flash stock firmware - you use fastboot
The commands are written above with link to the firmware
I am not going to Google - how to install stock firmware on a moto g5 for you. I'm sure you are capable of doing that and reading the guides for a step by step walk through if you don't understand how to use the fastboot commands written above
Sorry I'm not good at English
I have the z2 force xt1789-03, I flashed the wrong version of fw android 9 so I lost the baseband when I was in the android rom 8. I tried to flash the latest version but I could not get back the baseband. Please show me how to get it back to the beginning!
DuynangVietnam said:
Sorry I'm not good at English
I have the z2 force xt1789-03, I flashed the wrong version of fw android 9 so I lost the baseband when I was in the android rom 8. I tried to flash the latest version but I could not get back the baseband. Please show me how to get it back to the beginning!
Click to expand...
Click to collapse
If you have flashed a Pie ROM to your device you will not be able to go back to Oreo and have a working device. Did you try to flash an official version of Pie that was released by your carrier or did you flash a version that you found on the forums somewhere?
Getting baseband back and making wifi and sims work
I had the same issue and got stuck hopelessly but after a few hit and tries, I finally made my wifi and cellular network work on my sprint smartphone (baseband was gone).
what you need to do step by step is:
1. download pie variant of Verizon carrier from mirrors dot lolinet dot com/firmware/moto/nash/official/VZW/ (replace dot with . )
2. download latest pie variant of Retail variant of z2 force from mirrors dot lolinet dot com/firmware/moto/nash/official/RETAIL/
3. copy NON-HLOS.bin from verizon variant and copy it to retail variant of pie firmware
4. download any flashall file and rewrite it (open with notepad and edit, it is as simple as that) or run commmands in following order in retail firmware folder:
fastboot oem fb_mode_set
fastboot getvar max-sparse-size
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system_b system_other.img
fastboot flash oem oem.img
fastboot erase cache
fastboot erase carrier
fastboot erase userdata
fastboot erase ddr
fastboot oem fb_mode_clear
fastboot -w
fastboot reboot-bootloader
5. run flashall and let it boot.
6. enjoy
NOTE: reversion of baseband is not possible and maybe custom roms will work no more but you will get to make your device work.
muar_96 said:
I had the same issue and got stuck hopelessly but after a few hit and tries, I finally made my wifi and cellular network work on my sprint smartphone (baseband was gone).
what you need to do step by step is:
1. download pie variant of Verizon carrier from mirrors dot lolinet dot com/firmware/moto/nash/official/VZW/ (replace dot with . )
2. download latest pie variant of Retail variant of z2 force from mirrors dot lolinet dot com/firmware/moto/nash/official/RETAIL/
3. copy NON-HLOS.bin from verizon variant and copy it to retail variant of pie firmware
4. download any flashall file and rewrite it (open with notepad and edit, it is as simple as that) or run commmands in following order in retail firmware folder:
fastboot oem fb_mode_set
fastboot getvar max-sparse-size
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system_b system_other.img
fastboot flash oem oem.img
fastboot erase cache
fastboot erase carrier
fastboot erase userdata
fastboot erase ddr
fastboot oem fb_mode_clear
fastboot -w
fastboot reboot-bootloader
5. run flashall and let it boot.
6. enjoy
NOTE: reversion of baseband is not possible and maybe custom roms will work no more but you will get to make your device work.
Click to expand...
Click to collapse
Hi, excuse my English, I'm using a translator.
I have a problem, update my Sprint z2 force with a RETAIL firmware and all right just a couple of problems, the sim does not detect, I do not know if I lost the unlock-sim, because the wifi works perfectly, Will they know what it could be?
I did the above and it didn't work, it still doesn't detect the sim, should I flash the file of a Mexican company? I'm from México
Are there anyone has successful with this method ?
nothingtolose said:
Are there anyone has successful with this method ?
Click to expand...
Click to collapse
Unsuccessful here, mine is a variant XT1789-05, is currently with version OPXS27.109-34-4, but I have no wifi, no data network, lost baseband, any solution?
I've tried almost everything, wanted to put in edl mode, but it does not enter.
fallcaoalves said:
Unsuccessful here, mine is a variant XT1789-05, is currently with version OPXS27.109-34-4, but I have no wifi, no data network, lost baseband, any solution?
I've tried almost everything, wanted to put in edl mode, but it does not enter.
Click to expand...
Click to collapse
I read somewhere in this forum, your variant -05 can back to normal.
My variant -03 did not work with this method too.
yes
nothingtolose said:
Are there anyone has successful with this method ?
Click to expand...
Click to collapse
cordial greetings friends I tell you to use the method offered here by the partner and it actually works, I have an operator signal but it does not activate wifi, I really appreciate this help, but I have to solve wifi
:good:
muar_96 said:
Getting baseband back and making wifi and sims work
I had the same issue and got stuck hopelessly but after a few hit and tries, I finally made my wifi and cellular network work on my sprint smartphone (baseband was gone).
what you need to do step by step is:
1. download pie variant of Verizon carrier from mirrors dot lolinet dot com/firmware/moto/nash/official/VZW/ (replace dot with . )
2. download latest pie variant of Retail variant of z2 force from mirrors dot lolinet dot com/firmware/moto/nash/official/RETAIL/
3. copy NON-HLOS.bin from verizon variant and copy it to retail variant of pie firmware
4. download any flashall file and rewrite it (open with notepad and edit, it is as simple as that) or run commmands in following order in retail firmware folder:
fastboot oem fb_mode_set
fastboot getvar max-sparse-size
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system_b system_other.img
fastboot flash oem oem.img
fastboot erase cache
fastboot erase carrier
fastboot erase userdata
fastboot erase ddr
fastboot oem fb_mode_clear
fastboot -w
fastboot reboot-bootloader
5. run flashall and let it boot.
6. enjoy
NOTE: reversion of baseband is not possible and maybe custom roms will work no more but you will get to make your device work.
Click to expand...
Click to collapse
Hi,
confirmed working on my xt1789-03, with the following considerations:
-> Wifi and bluetooth now working
-> Sim card seems to be detected, but no radio or signal.
-> IMEI remains 0
-> When boot a message appears: "Verity Mode is set to disabled"
So, little step to success. From now, I have a little tablet with wifi.
Many thanks to Muar_96