Develop Bugs

[EOL][KERNEL][STABLE][TW][O][8.0][ERH1][31.08.18][SM-G930F/FD] SuperKernel V3.1.0

SuperKernel for SM-G930F/FD/K/L/S/W8
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Supports all touchwiz roms 6.0.1 on BPH6 base and higher
IF YOU FOLLOW MY STEPS BELOW, YOU WILL LOSE YOUR WARRANTY, KNOX WILL DISPLAY 0x1! I'M NOT RESPONSIBLE FOR ANY DAMAGED DEVICE!
Please check Question and Answer Thread first!
If you want to take my work and need it somewhere, or do other things with it, please ask me first for the permission. Otherwise you are not allowed to take it! Thank you !
SuperMan-Rom, a Touchwiz based rom made by myself!
Features of this Kernel:
- Build with latest official google toolchain v4.9
- Build with ERH1 kernel source!
- Latest Linux version 3.18.120, is always up to date
- Performance and Batterylife improved
- Choose between different CPU governors: performance, powersave, userspace, ondemand, interactiv (default), conservative, zzmoove, barry_allen, nightmare, darkness, pegasusq, yankactive intelliactive, ondemandplus, intellimm, bioshock, lionheart, smartmax, smartass2, smartmax_eps, alucard, blu_active, cafactive, electrodemand, ondemand_x, hyper and intellidemand
- Built with latest ramdisk sources from samsung (ERG2)
- Frandom Support
- Thunderplug hotplug driver can be selected in aroma (only for advanced users!)
- Gzip compressed ramdisk (supersu, magisk etc will work fine)
- I/O schedulers: CFQ (Default), ROW, No-op, Deadline, BFQ, FIOPS, SIO, VR, ZEN, FIFO, maple and SIOplus
- UKSM (Ultra Kernel Samepage Merging)
- Zram can be set in synapse
- Gentle fair sleeper switch enabled
- StateNotifier included
- HTC's async added
- Fsync toggle
- LED Control
- Charging control
- HMP control
- Full CPU/GPU control in synapse
- DVFS in Synapse
- Many controllable wakelocks
- Underclock: big core to 312Mhz, little core to 338Mhz
- Overlock: depens on your ASV
- GPU OC to 806 Mhz
- Init.d Support
- NTFS file system enabled
- CIFS/NFS file systems enabled
- F2fs supported
- Allow ADB-Insecure
- Wlan Wakelock decreased
- Fully controllable with synapse
- TCP (Network) control: Bic (default), Reno, cubic, Westwood, Highspeed, Hybla, HTCP, Vegas, Veno, Scalable, LP, Yeah and Illinois
- Selinux is set to permissive
- Zen-Tune implemented
- All bad samsung drivers disabled (like tima or rkp)
- Force encryption disabled
- Knox faked to 0x0
- Boeffla wakelock control
Download:
Marshmallow V1.X:
V1.9.7 on AndroidFilehost
Nougat V2.X:
V2.11.0 on AndroidFilehost
Oreo V3.X:
V3.1.0 on AndroidFilehost
Download via GrifoDev
All old releases
Bugs/Problems:
- None
Instructions:
0. Make a backup of your current stock kernel in TWRP, just in case you want to go back
1. Install a custom recovery for your phone, like this one here:TWRP
2. Follow the instructions on the page above, until you get a working recovery
3. Download the Kernel from below and copy it to your external SD Card
4. Reboot to your recovery by pressing volume up, home button and power button at the same time.
5. Install zip/select the kernel
6. Flash supersu, phh's root, magisk and all things that modify your boot.img
7. Wipe cache and dalvik cache (recommand)
8. Reboot
If you wanna join the beta tester group, download yourself telegram and click on the chat link: Telegram Group
Support:
If you like my work, feel free to hit thanks and/or give me a small donation by clicking the link right below. Thank you very much in any way! :good:
PayPal​
Credits/Thanks:
- Samsung for sources
- the great linus for his amazing kernel source
- arter97
- Jesec (for the great FP fix!!)
- dorimanx
- AndreiLux
- halaskz
- neobuddy83
- UpInTheAir for his great Synapse implementation
XDA:DevDB Information
SuperKernel for herolte, Kernel for the Samsung Galaxy S7
Contributors
Tkkg1994
Source Code: https://github.com/GrifoDev/SuperKernel
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: V3.1.0
Stable Release Date: 2018-08-31
Created 2016-05-30
Last Updated 2018-09-25

Changelog:
Old Changelogs:
SuperKernel V1.0:
- Changes compared to stock:
- updated CPUfreq drivers
- updated to latest stable linux (3.18.34)
- updated zram/zsmalloc and zswap for better ram management
- implemented tasks adj tree
- updated ext4
- updated crypto files
- added UKSM
- updated workqueue and sched features
- added gentle fair sleepers switch
- added new governors, ioscheds and tcp
- backports from 4.0 kernel
- many more things (already over 1000 changes compared to stock!!!)
- detailed history
SuperKernel V1.1:
- fixed fingerprint support, thanks to @Jesse Chan who found the right files to delete!
- arm64: mm: support ARCH_MMAP_RND_BITS
- int_sqrt.c: Correction square root algo with naming
- int_sqrt: Improve 3x faster integer sqrt
- mm: mmap: add new /proc tunable for mmap_base ASLR
- mmc: core: Expose use_spi_crc module parameter in sysfs (and disable it to gain perfomance)
- tima, knox and all "bad" samsung related configs are disabled now!
- over 100 updates in kernel/sched and in kernel/rcu to gain performance and better batterylife
- as always, visit github to see what exactly changed!
SuperKernel V1.2.1:
- Reverted back some changes I made in kernel/sched and kernel/time -> Probably fixed the random reboots (I never had one before, so you need to test this)
- Added the requested ROW iosched
- Added UC/OC frequencies thanks to @Jesse Chan (Kernel detects if you phone is capable or not for OC (jesses work), I added a check that only Grade A phones have full OC)
- added DAX to fs
- Many /mm and filesystem Updates (for ext4, ext3, ext2 and f2fs)
- Applied Jesse's fingerprint lag fix
- updated kernel/locking
- implemented Zen-tune V4.5
- cfq-iosched: fix the setting of IOPS mode on SSD
- More changes on github
SuperKernel V1.2.5:
- changed ramdisk compression from lz4 to gzip (which should fix systemless xposed)
- add a fsync toggle to enable and disable fsync
- added async from HTC
- Use erandom functions
- added wakup toggle for wlan
- mm: Allow for Exynos swap to be enabled
- enabled 2 additional lower CPU steps
- update "mm/zsmalloc: don't fail if can't create debugfs info"
- updated cifs/nfs/nfsd and filesystems
- updated memory management (page_alloc, vmstat, etc)
- added new z3fold driver
- probably made fingerprint scanner a little big faster
SuperKernel V1.3.1:
- Updated ramdisk to APF2
- Updated linux to 3.18.35
- removed the red latter at start up (you really really wanted that )
- Fixed random reboots from 1.3 in superman rom
- added a wakelock fix who should fix some google wakelocks
SuperKernel V1.4:
- completely reworked my w. Wipe cache and dalvik cache (recommand)
hole source code, now available under: Github
- Updated ramdisk with latest supersu patch
- many updates in /base/power/opp
- backports from 3.19 branch
- interactive updates (even more smooth now)
- added kasan for arm64 devices
- overall smoothness improved
- tested over one day, not a single reboot till now
SuperKernel V1.7:
- fixed phone turning on when offline charging
- Updated base and ramdisk to latest BPH6 source, this kernel will only work on BPH6 ROM!!!!
- added full synapse support, thanks to UpInTheAir (I adapted his implementation to work on S7)
- Updated linux to 3.18.39
- added f2fs support for /data
- fixed private mode not working after a reboot
- fully remade the whole source tree to get you the best experience!
- fixed the tcp bug which would otherwise make your phone vulnerable
- some other backports
- updated workqueue
- switched to 7.0 sabermod toolchain
- many more things I may forgot
SuperKernel V1.8.5:
- Started from scratch on BPHJ source code
- No more freezing, not a single problem left anymore!
- Updated to 3.18.42 linux (latest)
- Merged some new linaro patches into kernel
- f2fs should now work (and stay) on partitions you have chosen
- HMP opimizations added (tunable in synapse)
- GPU UC removed for now
- CPU OC/UC enabled, but stock freqs are default on first flash
- Disabled PEWQ (can be enabled in synapse)
- Updated thermal
- Disabled task ADJ tree
- enabled hmp packing
- crypto updated
- cpufreq some small updates
- BPIF ramdisk
- Selinux audit configurable
SuperKernel V1.9:
- Based upon BPJ7 source code
- Updated to linux 3.18.44
- added GPU OC to 806Mhz (thanks to @lyapota)
- updated ramdisk to BPJ7
- fixed some battery settings in synapse
- updated busybox to 1.26
- patched CVE-2016-5195
- changed behavior of cpu on high freqs a bit
SuperKernel V1.9.2:
- Updated to BPJG source drop
- Updated ramdisk to BPJG source
SuperKernel V1.9.5:
- This kernel is only for MM!
- Ramdisk base changed to BPL3 (source base is still the same)
- Updated linux to latest 3.18.45 version
- Backported most crypto drivers form 4.4 mainstream linux
- Enabled new crypto drivers and optimizations
- Updated random drivers
- Updated synapse, hopefully all is up to your needs now
- Added thunderplug hotplug (keep in mind that playing with thunderplug settings may lead to SOD)
- Added a special tab for hotplug drivers: Stock, disabled or thunderplug
- Updated busybox
- Updated script to create an init.d file if not existing
- Fixed LED fading in synapse
- statenotifier enabled again for thunderplug
SuperKernel V1.9.6:
- Based on latest BPL3 source drop release
- Fixed adaptable storage problem
SuperKernel V1.9.7:
- Rebased on latest BPLB Kernel source drop
- Updated ramdisk to latest BPLB
- Updated Linux version to 3.18.46
SuperKernel V2.0:
- Only for NOUGAT and TOUCHWIZ roms
- Rebased on latest DPLT base
- Latest DPLT ramdisk
- Latest f2fs backport from 3.18.y branch
- Maple iosched added (needs testing)
- selinux: nlmsgtab: add SOCK_DESTROY to the netlink mapping tables
- UPSTREAM: capabilities: ambient capabilities
- BACKPORT: full hardened usercopy backported
- mnt: Add filesystem private data to mount points
- New DVFS tab in synapse
- Updated all mcRegistry files to Nougat
- Changed toolchain to selfcompiled GNU 6.3 a53 optimized
- Sqlite binary updated
- Fstrim added
- Busybox changed to sbin/busybox (needs to be at this directory otherwise synapse won't work!)
- Some other things I may forgot
SuperKernel V2.0.1:
- Linux updated to 3.18.47
- busybox detection enhanced (you can now install to /sbin, system/xbin or su/xbin)
- State notifier disabled by default
- Allow all cores to go to highest freq
- People report working deepsleep so if it does NOT work for you, give me your wakelock stats, otherwise that's not helping anyone
SuperKernel V2.0.2:
- Updated ramdisk to DQAS
- Changed some settings in wakelock tabs for synapse (deepsleep issue was produced setting to extreme levels in synapse)
SuperKernel V2.1.5:
- Based on latest DQB3 release
- Updated Linux version to 3.18.48
- Updated ramdisk to DQB3
- Updated all mcRegistries to DQB3
- Added HID gadget keyboard/mouse patch
- Updated android binder driver
- Also one file to flash for all variants
SuperKernel V2.2.0:
- Based on latest DQB7 source drop release
- Updated to latest DQB7 ramdisk
- Fake knox 0x0 (as in superman-rom 2.2 or superstock-rom 2.5) (credits to @lyapota )
- Fixed init.d not working correctly sometimes
SuperKernel V2.4.2:
- Completly rebased on top of superstock kernel
- Based on latest DQCG release
- Updated ramdisk to DQCG release
- Added and reworked scripts to fake knox (should also work with supersu now)
- Updated conservative and ondemand govenror
- Added PWM flicker free patch
- Fixed safetynet failing sometimes
SuperKernel V2.4.3:
- Updated Zen-tune to V4.10 version (only minor changes)
- Fixed thunderplug showing errors in synapse
- killed PWM flicker free due to many broken stuff
- mcRegistry files have been upgraded to DQCG
- Reverted many sched patches, I think general performance is much better now (maybe placebo idk), please let me know your thoughts!
- Fixed some synapse errors here and there, still I haven't had the time to work on cortex brain staying offline, sorry guys
SuperKernel V2.5.0:
- Source updgraded to DQD1 (same as DQD2)
- Ramdisk updated to DQD2
- mcRegistry updated to DQD2
- Fixed external iosched error on Synapse
SuperKernel V2.5.2:
- Ramdisk updated to DQD3
- mcRegistry files updated to DQD3
- Linux version updated to 3.18.51
SuperKernel V2.6.1:
- Updated to DQEF source code
- Updated ramdisk to DQEF
- Added more flags to resetprop (secret mode in browser should work again, at least it did on the s8)
- Updated to most recent f2fs branch from official google supporter
- Updated Linux to 3.18.56
- Updated mcRegistry to DQEF
SuperKernel V2.7.0:
- Based on latest DQFM source code
- Ramdisk updated to latest DQFM
- Updated linux to 3.18.60
- Reverted a patch in one of those linux updates which broke deepsleep in some cases
- Changed code for mcRegistries: they won't get replaced anymore, it just deletes the "bad" file
- Added spectrum support, untested!
SuperKernel V2.7.2:
- Based on latest DQG1 source code
- Ramdisk updated to latest DQG1
- Updated linux to 3.18.66
- Includes GPU libs, so there is no chance after another kernel this will bootloop!
- Since samsung is not updating their kernels very frequently on the s7, I thought I better push out some small updates
SuperKernel V2.8.0:
- DQH8 source drop update
- DQHY ramdisk update
- Linux update to 3.18.70
- Toolchain update to GNU GCC 6.4.0 @djb77
SuperKernel V2.9.0:
- Finally an awesome update to DQIC with a much higher changelist!
- DQIC ramdisk update
- Linux update to 3.18.72
- Updated AIK to V2.9
SuperKernel V2.10.0:
- DQJ1 source drop update
- DQJ1 ramdisk update
- Linux update to 3.18.77
- 6.4.1 toolchain update to @djb77
SuperKernel V2.10.1:
- DQK1 source code shares the same source as DQJ1, that's why it's only a small change
- DQK1 ramdisk update
- Linux update to 3.18.83
- Toolchain updated thanks to @djb77
- Boeffla wakelock control added
SuperKernel V2.10.5:
- DQLF still has the same kernel source code as DQK1
- DQLF ramdisk update
- Linux updated to latest 3.18.91
- Updated toolchain
- F2fs update to latest release
- AIK updated to v3.1
SuperKernel V2.11.0:
- DRAG source code update
- DRAG ramdisk update
- Linux update to 3.18.94
- Toolchain updated thanks to @djb77
SuperKernel V3.0.1:
- This kernel can only be used on OREO stock based roms! (no ports)
- Updated kernel source to most recent ERG2 code
- Updated ramdisk to ERG2
- Changed toolchain to google 4.9 for better compatibility
- Updated AIK to 3.3
- Updated f2fs to most recent available
- Updated linux to 3.18.118
- Added battery store mode
- All previous features are included!
SuperKernel V3.0.2:
- Rebuild from scratch to fix some bugs
SuperKernel V3.1.0:
- Source code based on ERH1
- Updated linux to 3.18.120
- Fixed samsungs mismatch in kernel compilation

Q&A
Below I added some basic Q&A stuff which here so hopefully it will answer most of your questions!
Q: How to get into Download Mode?
A: Power off your phone, than hold: home + volume down + power on button until you see the download mode.
Q: How to get into Recovery Mode?
A: Power off your phone, than hold: home + volume up + power on button until you see the recovery mode.
Q: I get verification failed at start up!?!? My phone is broken now?
A: Yes, you have to buy a new phone now. Just kidding You did not disable force encryption in TWRP (how to do so you will find below in how to decrypt your phone).
Q: I get FRP LOCK? WHYYYYYY???
A: Very simple answer, you did not enable OEM Unlock in developer options. Now you need to flash full rom with odin again and start from scratch. But don't forget to enable OEM Unlock this time!
Q: I got FC's and other Problems with the kernel, what to do?
A: Take a logcat for me, developers use to say: without a log, it never happened . A logcat can be grapped with a PC and ADB installed, simply type: adb logcat > log.txt while your phone is connected and the error is happening.
Q: What kind of logs can I provide to help you?
A: Logcat: This one is for general infos about FC's
DMESG: this is for kernel related things
Last_Kmsg: this can be used after a random reboot
Q: How to get logs?
A: 1. Connect your phone to your pc
2. Make sure you got usb debugging enabled
3. Install Minimal ADB tool
4. After install open it and type: adb logcat > logcat.txt, adb shell dmesg > dmesg.log, adb shell cat proc/last_kmsg kmsg.log
5. Send me the file you got
Q: Which devices are supported at the moment?
A: Current supported devices are: SM-G930F/FD/W8. All other exynos models can work but are UNTESTED
Q: Is this kernel working on Snapdragon 820 variants?
A: No, sadly not.
Q: Help, I never had a code and now after installing the rom my phone asks for a password??
A: Your device is still encrypted, on step 0 it tells you to be sure you're not. So, what do you need to to in case you are still encrypted:
1. Boot into TWRP
2. Select Wipe
3. Select wipe data
4. Then you manually need to type "yes" with the keyboard
5. Confirm the wipe (this will remove the encryption)
6. Reboot your recovery
Q: Is there a way to get rid of encryption which is simpler?
A: Not really, you could also wipe data with stock recovery but this is quite a big hassle so above method works better.
Q: On TWRP there is an error about /data mount, what to do?
A: Your device is encrypted, follow the above steps to get rid of your encryption.
Q: Synapse shows no UCI support!
A: Reflash kernel, a script of you may overwrite my synapse config
Q: I want to switch kernel, how?
A: Since we have systemless xposed and systemless supersu, we have patches in ramdisk of boot.img. This means you have to reflash xposed and supersu after every change of kernel!.
Q: I lost root after installing this rom. What to do?
A: All mods (like supersu, phh's root, xposed and magisk) are stored in /ramdisk of kernel boot.img. So if you flash this rom, and after this another kernel (Which has supersu included by default) you can not do much. You have to stick to the two kernels provided in rom. Also when switching kernel, you need to flash all related zips again after changing it. Last tip: Do not use magisk until you really need it for android pay!
Q: I got random reboots, heeelp!
A: This is most likely from a custom kernel, if you face random reboots please check if you have the latest kernel installed or switch back to the stock kernel included in the rom.
Q: My screen is kind of yellow/orange and the touchscreen doesn't work at all!
A: You have chosen the wrong kernel in aroma selection. Reflash the rom without any wipe selecting the right kernel version.

First! DL now and flashing! Thanks for the hard work!
Sent from the silver bullet 930F Running Superman Rom

Will apps like easyHome (https://play.google.com/store/apps/details?id=com.jamworks.easyhome) work? It uses FP as capactive home button.

Flashed and running awesome so far, haven't messed with any of the settings yet though.
Sent from the silver bullet 930F Running Superman Rom

Quickvic30 said:
Flashed and running awesome so far, haven't messed with any of the settings yet though.
Sent from the silver bullet 930F Running Superman Rom
Click to expand...
Click to collapse
Would you be so kind to show antutu benchmark. I just want to see what it improves

Shuuin said:
Would you be so kind to show antutu benchmark. I just want to see what it improves
Click to expand...
Click to collapse
Benchmark doesn't show any hints of real-world results when it comes to kernels..
Sent from my SGP712 using XDA-Developers mobile app

Shuuin said:
Would you be so kind to show antutu benchmark. I just want to see what it improves
Click to expand...
Click to collapse
Here ya go
Sent from the silver bullet 930F Running Superman Rom

Great!!!!Thank you for your works!!!!

Thanks for this kernel. I like the zzmoove governor. But if i choose him on little my phone freezes and than it reboots. At big it's ok

Black_Focus_X said:
Thanks for this kernel. I like the zzmoove governor. But if i choose him on little my phone freezes and than it reboots. At big it's ok
Click to expand...
Click to collapse
Zzmoove does hotplug, but the little cores can't do hotplugging. So it will reboot
Sent with my SM-G930F powered by SuperMan

Tkkg1994 said:
Zzmoove does hotplug, but the little cores can't do hotplugging. So it will reboot
Sent with my SM-G930F powered by SuperMan
Click to expand...
Click to collapse
Any chance that you will add..
1) ARCH_POWER
2) ROW Scheduler
3) Make Power Efficient WorkQueues user-configurable in next version
4) Trim kernel and remove useless debuggers, bloated kernel drivers and so on for making the kernel as slim and battery / performance friendly as possible
5) (Perhaps) configurable C-States (Idle states) ?
Just as some bonus, useful stuff in v2.0?
Sent from my SGP712 using XDA-Developers mobile app

Destroyedbeauty said:
Any chance that you will add..
1) ARCH_POWER
2) ROW Scheduler
3) Make Power Efficient WorkQueues user-configurable in next version
4) Trim kernel and remove useless debuggers, bloated kernel drivers and so on for making the kernel as slim and battery / performance friendly as possible
5) (Perhaps) configurable C-States (Idle states) ?
Just as some bonus, useful stuff in v2.0?
Sent from my SGP712 using XDA-Developers mobile app
Click to expand...
Click to collapse
1. Arch power has been removed on mainstream kernel
2. ROW was my plan as well
3. It is enabled by default, but isn't it already tuneable?
4. This is always my goal
5. Haven't thought about that until now
Sent with my SM-G930F powered by SuperMan

Finally it's come！Will it be implement the FP function to the future build？
---------- Post added at 07:26 AM ---------- Previous post was at 07:24 AM ----------
krogoth said:
Will apps like easyHome (https://play.google.com/store/apps/details?id=com.jamworks.easyhome) work? It uses FP as capactive home button.
Click to expand...
Click to collapse
i don't think so coz it will totally stop the FP SVC when u flash this kernel

Another question. Can you add undervolting?

Tkkg1994 said:
1. Arch power has been removed on mainstream kernel
2. ROW was my plan as well
3. It is enabled by default, but isn't it already tuneable?
4. This is always my goal
5. Haven't thought about that until now
Sent with my SM-G930F powered by SuperMan
Click to expand...
Click to collapse
PowerEfficient WorkQueues seems to revert itself to "Enabled / On" even though I have tried to disable it..
Sent from my SGP712 using XDA-Developers mobile app

Black_Focus_X said:
Another question. Can you add undervolting?
Click to expand...
Click to collapse
I'm using the KTweaker app and it allows me to undervolt.
Sent from the silver bullet 930F Running Superman Rom

Black_Focus_X said:
Another question. Can you add undervolting?
Click to expand...
Click to collapse
Quickvic30 said:
I'm using the KTweaker app and it allows me to undervolt.
Sent from the silver bullet 930F Running Superman Rom
Click to expand...
Click to collapse
Yes it's already in the kernel but not all kernel apps can detect that. Will add stweaks and/or synapse support for this soon
Sent with my SM-G930F powered by SuperMan

Ok. With Kernel Adiutor i don't see it

[6.0+]Mimori Kernel [AOSP & Lineage OS Based ROM]

Mimori Kernel | Stability for performance
For Xperia M
Based on Lineage OS 14.1 source​
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Mimori Kernel based on Lineage OS 14.1 source, and included many improvement and optimization on processor, I/O and include some feature for Xperia M / M dual devices that use Marshmallow as base ROM.
Mimori offered kernel performance, stability, smoothness process on cpu and already have full support on NEON, this kernel need kernel configuration app to control this kernel, so try to find kernel configuration app after flash this kernel.
Recommended Kernel Configuration :
- Kernel Adiutor (BETA)
- Device Control
Okay this is several features that i include in this kernel.
This kernel feature is :
Kernel Features
* Linux Kernel Version 3.4.113
* Compatibility with AOSP,CM And LineageOS based ROM [Android 6.0+]
* Added overclock up to 1,4Ghz
* Added Double Tap 2 Wake Feature (Incl. Vibration)
* Added custom CPU Governor : Alucard,Intelliactive,IntelliMM,Lionheart,Adaptive & Blu Active (specially for Blu Active is thanks to @sudokamikaze for him workaround to make it work for linux 3.4.x based kernel)
* Added custom I/O Sched Governor : zen,sio,sioplus,tripndroid,fifo,fiops,vr and maple (specially for maple is thanks to @sudokamikaze for him workaround to make it work for linux 3.4.x based kernel)
* Added custom TCP Modules : Advanced,Bic,Westwood,Hybla,Vegas,Veno,Yeah and more
* Added CPU Voltage Table Control
* Implement Power Efficient Workqueues
* Dynamic management of dirty page writebacks
* Added Interface of Gentle Fair Sleepers, Software CRC and Arch Power (Option Disable by Default)
* Added Frandom Support
* Added Dynamic Fsync 2.0
* Entropy Tweaks
* NEON VFPv4 Optimized (hard)
* Added Intelli Plug v4.0
* Added Intelli Thermal v1.0
* Added F2FS File System Support (Based on Linux 3.4.y Branch) (Working)
* Added EXFAT File System Support (Driver Version v1.2.9) (Need Test)
* Added USB Keyboard Support
* Optimized I/O Sched
* Compiled using GCC 5.4.X Hyper Toolchains
* Updated CVE Patch From LineageOS Kernel Source 20171106
[/LIST]
[/LIST]
How to install :
1. Download Mimori Kernel and install it from recovery mode, use TWRP recovery (TWRP Link)
2. install kernel adiutor from Playstore for kernel configuration (i don't have myself app to control kernel) (Try to use BETA version to get fix for CPU temperature)
3. Final step, let's configure kernel like what you want it :victory: and enjoy my first custom kernel
For download, look at download tab on top of this thread
Thanks to : 
 @PecanCM [For Kernel Source] 
 @Alex_Gamer [For Kernel Tester & Troubleshoot] 
 @thichthat [For DT2W Source]
XDA:DevDB Information
Mimori Kernel For Xperia M, Kernel for the Sony Xperia M
Contributors
Nicklas Van Dam, PecanCM, Alex_Gamer
Source Code: https://github.com/Nicklas373/Mimori-Kernel_MSM8227_LineageOS_14.1
Kernel Special Features: Overclocked, ARMV7 NEON Optimized
Version Information
Status: Stable
Current Stable Version: Seventh Build
Stable Release Date: 2018-02-11
Created 2016-09-03
Last Updated 2018-02-19

Kernel Adiutor OTA Update Information
Now for CyanogenMod And AOSP Based ROM, Hana Kernel Offered OTA Update feature for kernel update using kernel adiutor app for CyanogenMod Based ROM with "download" feature in kernel adiutor.
You can download new build in that menu included ; introduce, kernel feature and changelog update. Now i'm still try to enable it on LineageOS too, i'm just need to wait confirmation from the admin .
For anyone want to install this kernel, can access too using KA. just like normal download and installation for kernel :laugh:
Have fun

Kernel Adiutor Information
For Kernel Adiutor Usage
During new stable version of Kernel Adiutor have problem with CPU temperature, now we should use BETA build from Kernel Adiutor to get fix for that problem.
And for set on boot configuration, i'm not recommended it again , since that only can make kernel error during boot up process.
So set kernel when system is already boot is best option for stability and performance.
If kernel adiutor to hard for configure, then you can try Device Control app to manage your kernel.
This app is almost same like KA but it's little simple and more friendly for configuration

Changelog :
Seventh Build (20180211):
- Fixed some upstream issue
- Upstream to 3.4.113 (REBASE change)
- Fix issue with OTG problem (Recovery or System)
- Updated F2FS to latest 3.4.y and misc fixes
Sixth Build (20180122):
- Updated Kernel Security Patch to 20171106 (Based on MSM8960T Source)
- Change GCC to GCC 5.4.X Hyper Toolchains
- Misc fixes with intelli thermal
- Applied last patch with 3.4.113
- Applied security patch with "KRACKS attacks"
- Removed sdcardfs drivers (not used by device)
- Misc CPU Optimization
- Set readahed to 512kb
- Added GPU optimizations flags
- Improve Hard Floating Point for neon-vfpv4
Fifth Build (20171002):
- Introduce IMAGINE Codename
- Upstream Linux Kernel to 3.4.113 based on git.kernel.org
- Revert change of F2FS (back to old source)
- Revert some optimization change
- Added Maple I/O Sched (specially for maple is thanks to @sudokamikaze for him workaround to make it work for linux 3.4.x based kernel)
- I/O Sched Optimization for SIO and ZEN
- Enable Interface Of Software CRC
- Misc CPU Optimization
- Added some sched optimization
- Disabled USB Fastcharge v1
- Reverting Permissive, Back to Enforcing
- Added Blu Active CPU Governor (specially for Blu Active is thanks to @sudokamikaze for him workaround to make it work for linux 3.4.x based kernel)
- Added Support for Neon VFPv4 With Hard Floating
- Disabled Quick Wake Up Drivers
Fourth Build (20170913):
- Added Optimization on I/O Sched (Improves SSD Speed)
- Misc fixes for conservative governor
- Added F2FS and EXFAT File System Support
- Added Hyper CPU Governor
- Optimized KSM
- Update Intelli Plug to v4.0
- Optimized SLUB
- Set readahed to 256KB
- Added CCACHE for faster kernel building
- Updated CVE Patch (Kernel Security Patch) to 20170826 Based On MSM8960T
- Misc Optimization
- Added Quick Wakeup driver
- BACKPORT F2FS from branch Linux 3.4.y (git.kernel.org)
- Reverting Quick Wakeup Driver
- Added USB Keyboard features
- Updated SDCARDFS Driver
- Misc fixes
Third Build (20170821):
- Little Improvement on CPU Bus Speed
- Added Dynamic Fsync 2.0
- Added Frandom Support
- Added Interface of Gentle Fair Sleepers (Option Disable by Default)
- Misc change on I/O Partitions
- Dynamic management of dirty page writebacks
- Removed "+" Symbol From Kernel Version String
- Implement Power Efficient Workqueues Feature (Enable by Default)
- Revert Alucard CPU Governor to v1.0
- Added Interface of Arch Power Features (Disable by Default)
- Entropy Tweaks
- Build vfp with softfp
- Misc change with cpufreq
- Added Intelli Plug and Intelli Thermal
- Fix Neon VFP
- Upgraded Kernel to 3.4.4
- Change toolchains to Hyper Toolchains GCC 4.9
- Decrease thermal limits to 70c
Second Build (20170817):
- Set kernel as permissive
- Enabling 972Mhz to fix slow response on boot and skipped frequency on system
- Added Custom TCP Congestion
- Added CPU Voltage Control
- Added DT2W Vibration Support
- Added USB Fastcharge v1
- Adapted Some CPU Governor with CPU Freq Table
First Build (20170816):
- INITIAL BUILD
: - Included Custom CPU Governor
- CPU Overclocked to 1.458Mhz
- Using NEON Optimized as VFP
- DT2W Feature
- CPU Optimization Algorithm
- Custom I/O Sched

Kernel Adiutor Configuration
CPU Manager :
CPU Max Frequency : 972Mhz (For Normal Usage) . 1.2Ghz (For Multitasking Usage) & 1.4Ghz (For Hard/Gaming Usage)
CPU Min Frequency : 384Mhz
CPU Governor: Alucard or Interactive (For Normal Usage), Alucard or IntelliMM (For Multitasking Usage) & Lionheart or Intelliactive, Blu Active (For Hard/Gaming Usage)
(Beside that leave it as stock)
Hotplug Manager :
Mpdecision = Disable
Intelli Plug = Enable
Profile = Eco for Performance
(Beside that leave it as stock)
Thermal Manager:
Thermald : Disable
Intelli Thermal : Enable
Core Control : Enable
Frequency Throttle Temperature : 60c
CPU Throttle Temperature : 70c
Thermal Limit Low = 2
(Beside that leave it as stock)
GPU Manager
GPU Max Freq : 400Mhz
GPU Governor : Ondemand or Performance (For Hard Gaming)
I/O Scheduler =
(Leave it as stock)
Misc =
Software CRC Check = Disable
Dynamic Fsync = Disable
Arch Power = Disable (Not really recommended)
Gentle Fair Sleepers = Disable
TCP Congestions = Depends on your need
Option already update during new kernel feature is include
For explanation (cpu hotplug, and i/o sched) check on this thread
CPU Governor : Link- 1 Link-2
I/O Sched : Link
CPU Hotplug :Link - 1 Link - 2
Special Thanks to @gsstudios for guide :laugh:

[INFO] Double Tap 2 Wake & BETA Build
For Double Tap 2 Wake
Try to use kernel adiutor and check in wake tap, after that choose DT2W and enable it using "full'" option and then let's try DT2W features with vibration on mimori kernel
NOTE : BETA Build For Testing (Not Stable)
github/build
For BETA, try to look date for kernel. Find latest one, and anyone can test latest beta if don't want wait for stable update. I can't promise to make fast update for stable source, i don't want to make any problem. so it's better stay at beta and whenever it ready, and it should release on thread :victory:

Thanks.

Garv Maggu said:
Thanks.
Click to expand...
Click to collapse
you're welcome, i'm still working for optimization in armv7 vfpv4 module.
have fun

Updated
New kernel build v1.1 is released with several fix for vfpv4 and neon modules, download link in on download tab.
have try

Great!

Please add dt2w

Niiiice! I was waiting for new release, I'll test it now

Alex_Gamer said:
Niiiice! I was waiting for new release, I'll test it now
Click to expand...
Click to collapse
my laptop is back from service center , and now is time to back :laugh:

romspeed said:
Please add dt2w
Click to expand...
Click to collapse
i will try on next update, it's to hard to add that anyway .

Nicklas Van Dam said:
my laptop is back from service center , and now is time to back :laugh:
Click to expand...
Click to collapse
Good to hear that your laptop its back to rock

Really good work working like a charm
Just one question on my device sound is bursting any particular reason behind that and is that can be controlled through any setting or app
Sent from my SM-J700H using Tapatalk

Kb44994 said:
Really good work working like a charm
Just one question on my device sound is bursting any particular reason behind that and is that can be controlled through any setting or app
Sent from my SM-J700H using Tapatalk
Click to expand...
Click to collapse
sound is bursting? i think i'm not to modified to sound on this kernel, maybe that's from high cpu usage so that's make sound is distortion. i will try to look at sound option.
[EDIT]

Kb44994 said:
Really good work working like a charm
Just one question on my device sound is bursting any particular reason behind that and is that can be controlled through any setting or app
Sent from my SM-J700H using Tapatalk
Click to expand...
Click to collapse
i'm update kernel with clean build and kernel optimilization, i hope that can fix your problem. i'm already compare sound with stock and my kernel. i'm not hear any particular change on sound volume, maybe very little difference, please to wipe dalvik-cache and cache after install this update

Updated
New kernel build v1.2 is released with several clean build for kernel and optimization on kernel compiler to reduce size, download link in on download tab.
have try

Updated
New kernel build v1.3 is released with first stable build , added auto hotplug drivers and more optimization for armv7 and krait processor
download link in on download tab.
have try

[Kernel][8.0/8.1][J710X]HeliosPro Kernel V2.6

Welcome to The HeliosPro Kernel Thread for Galaxy J7 2016
Built with Various Oreo 7870 Source
Linaro GCC 6.1.1
Warning : Me nor XDA Are responsible for any damage that might be caused after flashing any file provided here. Please take caution and be aware of what you are doing. And Always backup !
​
-- Features --
[x]Fake Enforcing (Permissive and shows enforcing)
[x]Compiled with Linaro6.1.1
[x]Native BlueLight Filter To J710X Panel
[x]ADB Insecure
[x]Fake KNOX
[x]Private Mod support
[x]MultiCPU Governors
[x]Multi I/O Schedulers
[x]Multi TCP Algorithms
[x]Limited Wakelocks
[x]Dynamic Fsync 2.0
[x]Fsync
[x]PowerSuspend 1.5
[x]UKSM V1.23
[x]Boeffla wakelock blocker v1.1.0
[x]StateNotifier & SysfsHelper
[x]Optimized ZSwap
[x]Optimized Deadline I/O
[x]Better Input Booster
[x]Quicker Doze entry
[x]Other improvments for Batterylife and performance
[x]Support Android 8.0/8.1
[x]WireGaurd Support
[x]CPU VoltageControl
[x]CPU OC upto 1700MHz
[x]GPU OC Upto 1146MHz
[x]GCC 6/7 Support
[x]CRC Disabled by default
[x]Reduced Wakelocks
[x]GPU/CPU Voltage dropped
[x]Improved GPU Utilization
[x]Improved standby
[x]Adoptable SD patched
[x]Deodex oreo support
[x]Many ram improvments
[x]No sim breaking with 8.1 rooting
[x]Encryption Support for StockRoms
[x]And many more listed in changelogs below
[x]Pre-Rooted
The kernel comes included with EliteTuner to control various kernel parts.
--How to install--
If you have flashed Root through any means other than magisk, Please uninstall it (SuperSU>Full unroot)
Open developer options (Press aboutphone > build number 7 times) Enable OEM Unlock
Flash TWRP Recovery that can be found in J710 Section
Fully Wipe internal storage and format data (Must for first time flashing TWRP)
Copy Kernel to your desired Location
Install Zip > Select kernel.zip
Reboot and wait
First time rooting, Open magisk app Once to ensure root is working
--Basic Info --
This kernel is mainly for users who want more than just root, As permissive allows for more flexibility with some of the mods found on xda
You are free to use this kernel in any future rom aslong as you Link this thread / Github Source​
-- Credits --
@ananjaser1211 for this golden kernel and adding support for our device.
@BlackMesa123 and @corsicanu for working with my projects
@topjonhuw For Magisk
@geiti94 For Wifi password Fix
@Noxxxious For general help​And my Elite-Team for their contributions to my projects and being Awesome.​
Download <> Changelog <> More info In second Post
Github Source : https://github.com/ananjaser1211/Helios_7870​
XDA:DevDB Information
HeliosPro Kernel V2.6, Kernel for the Samsung Galaxy J7
Contributors
mohitmallick17, AnanJaser1211, corsicanu
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: V2.6
Stable Release Date: 2019-02-27
Created 2019-02-27
Last Updated 2019-02-27

HeliosPro V2.6 Update​
This is TOUCHWIZ only. The new compiler greatly improves performance on both 8.0 and 8.1 Based roms.
Enjoy, i know im not making any roms due to time, but i can support this kernel.
Changelog :-
- Native BlueLight Filter To J710X Panel
- Compiled with Linaro 6.1.1 Compiler
- Performance and battery greatly improved with new compiler
- Fixed custom ramdisk scripts
- Deodex Supported well with magisk
- GMS Blocker
- 99Killer service (kills gms in idle for better sleep)
- NFC Should work now
- More precise cpu voltage
- Magisk 18.1 Included
Follow the Full change log on the Github source.
Download : Google Drive
Size : 29.1MB
HeliosPro Kernel V2.5
Android 8.0/8.1 Only
J710F/FN/G/M/MN/GM (And any J7(6) variant)
​Changelog :-
-Supports both 8.0 and 8.1.1 Stock/Ported TouchWiz Roms
- Updated drivers to latest J530F 8.1 Source
- Adoptable Storage (not tested)
- Encryption Support (on stock roms only)
- Improvements to GPU CPU Over clocking Thanks @renoxtv
- Ensure you have LATEST TWRP otherwise you wont be able to read Internal storage in TWRP
- Removed 160mhz GPU as it didnt work and caused issues
- Fixed CPU Undervolting (overvolting doesnt work well)
- GPU overclocking and Control now works on EliteTuner
- Updated Camera and WiFi to latest 8.1 Firmware
- Magisk 17.2 Included
- some other minor improvements to pretty much everything
Follow the Full change log on the Github source.
old changelog
HeliosPro Kernel V2.0
Android 8.0/8.1 Only
J710F/FN/G/M (And any J7(6) variant)
​
This can be used on any of my 8.0 Roms and tested on stock 8.1 Rom (does not break Simcard when rooting)
its based off multiple exynos7870 sources
P.S : GPU overclocking is not yet completed, you can use it manually with OxygenControl app
instead of EliteTuner app (included in zip)
HeliosPro v2.0 Changelog
- CPU Overclock upto 1.7GHz and VoltageControl
- GPU OverClock Upto 1146GHz
- Memory Mangment improvments
- MMC improvments
- Full Wakelock Control for wlan/bt and much more
- BoefflaWakelock Blocker With preconfigured WLs
- UKSM V1.2.3
- SecBattery control and Unstable current detection
- Powersuspend Driver for display
- Fsync Toggle
- Dynamic FSync
- Tons of I/O Schedulers
- Tons of CPU Governors
- StateNotifier Driver
- CPUFreq optimizations
- DisplayState hooks
- ondemand/conservative cache improvments
- Swap/VNSwap improvments
- WireGuard Support
- F2FS Support
- Frandom Support
- Muted useless debug msgs
- Tons other than can be tracked in commits
I/O Schedulers :-
- Maple
- BFQ
- ROW
- Fifo
- Fiops
- Sio
- SioPlus
- Tripandroid
- VR
- ZEN
CPU Governors :-
- Blu_Active
- CafActive
- hyper
- bioshock
- cultivation
- dancedance
- electrodemand
- impulse
- intellidemand
- ondemandX
- pegasusq
- smartass2
- smartmax
- wheatly2
Source : Github​
RefinedKernel (7.0/7.1.1)
V2.7
-WireGuard Support
-HotSpot Fix for Note 8 port
-CPU Boot frequency reduced
-GPU/CPU Frequency improvments
-InputBooster Changes
-Boosted charging limit
-Updated Ramdisk
-Magisk 16.3 included
---------------------------------
V 2.6
-CPU/GPU Overclocking support
-Support for more variants
-Fixed Magisk resetprop conflict
-Disabled DM-Verity from source
-Fixed KNOX 0X0 PATCH
-Removed Audit Spams in log
-Disabled Samsung RMM
-Disabled RKP/KAP/TIMA From source
-Slight increase to charging current
-Inputbooster ~ 1.2GHz
-CPU OC upto 1700MHz
-GPU OC Upto 1146MHz
-Allow CPU To go as low as 200MHz
---------------------------------
-V2.5
-Magisk V15.2
-Dynamic Fsync 2.0
-HTC Asynchronous Fsync
-PowerSuspend 1.5
-UKSM V1.23
-Boeffla wakelock blocker v1.1.0
-StateNotifier & SysfsHelper
-Optimized ZSwap
-Optimized Deadline I/O
-Better Input Booster
-Quicker Doze entry
-Other improvments for Batterylife and performance
----------------------------------------------------
-V2.0 Note 8 port
Rebuilt the kernel from latest source code : J530FXXU1AQI3
Added CPU Governors
Added I/O Sched
Added TCP Algorithms
Added FakeKnox
Added ResetProp
Added 7.1.1 Support
Added CPU Improvments
Reduced Wakelocks
----------------------------------------------------
-V1.0 Initial release

F.A.Q​Q : What benefits Does this have over stock kernel ?
A : This kernel is aimed at Android enthusiasts who like to get the most out of their phones. But also is user friendly and pre customized for the average user to figure it out
Q : Can i use Kernel Auditor ?
A : Yes, but to utilized the full potential of this kernel including overclock and many more, you should use EliteTuner included in the ZIP
Q : What is Overclocking ?
A : Basically, Slightly more performance For an extra consumption in battery. you can google it for more details
Q : Why is CRC disabled by default ?
A : The extra operations can cause a big hit on Block performance
Q : Is it safe to overclock ?
A : ive tested the kernel on the Max over clock setting (Without turning off the 4 big cores) without any problems for a month
Q : What is SamsungHotplug ?
A : its a feature from samsung that Auto-Disables Inactive Big Cores to reduce power consumption
Q : Why i cant See/set Big cores frequency?
A : thats due to hotplug removing the sysfs files that control the frequency and overwrite them by stock values
Q : Does this kernel Pass SafteyNet ?
A : Yes, The kernel has all the needed bypasses already so it can even bypass safteynet without Magisk
Q : Can i use Knox Apps ?
A : No, You cant use secure Storage, However it has PirvateMode Support built in (if your ROM supports it too)
Q : Can i use this on Stock Rom ?
A : Yes, it works on both Stock and Custom (including 8.0/8.1 Ports)
Q : What is the MAX mAH i can charge at ?
A : charging limits are changed from 1A to 1.5A​

--- Reserved ---​

--- Reserved ---​

WoW. Good Job!
And first comment

how to turn on the blue filter? Stock rom 8.1

alik23kz said:
how to turn on the blue filter? Stock rom 8.1
Click to expand...
Click to collapse
Simple. All you need to do is to push the BlueLightFilter apk from a supported rom 8.0/8.1 to priv-app and make a reboot. Add the toggle for it, or launch it via activity launcher.

Good kernel i installed in oreo fusion

Reset?
I am using Oreo Fusion, do I still need to factory reset or wipe my data?

chechemon said:
I am using Oreo Fusion, do I still need to factory reset or wipe my data?
Click to expand...
Click to collapse
No. You don't need to wipe data or factory reset.
Just flash it!
---------- Post added at 03:19 PM ---------- Previous post was at 02:36 PM ----------
This kernel is good for fix the bluelight filter on OreoFusion Rom. It really fixes it.

chechemon said:
I am using Oreo Fusion, do I still need to factory reset or wipe my data?
Click to expand...
Click to collapse
Flash and done

Can anyone please guide me to compile kernal for nethunter please andr also tell me from which i take source kernal for j710f and the compile it for nethunter

Iam using stock oreo rom 8.1.0 from samsung. I have rooted my phone with magisk and have installed oxygen kernel. Do i have to wipe data and flash this kernel or just flash it.

Sulltan Mehmood said:
Iam using stock oreo rom 8.1.0 from samsung. I have rooted my phone with magisk and have installed oxygen kernel. Do i have to wipe data and flash this kernel or just flash it.
Click to expand...
Click to collapse
Just flash it!

No one is replying me what the heck is that

please also we want a version for AOSP

Kindly update to version 2.7 as it is already released for j7 pro

Kindly compile it to work with some external wifi adapter(WLAN1) and enable ralink drivers please.
I want to use NetHunter with J710F.
Please enable these features kindly, request to OP.

Also port some goodies from oxygen kernel e-g spectrum, new kernel from source and gpu voltage and others please a humble request.. also make sure to increase battery timing with efficient performance with lowest consumption of battery.

[Kernel][OneUI/Treble][J710X]CronosKernel V5.0

Welcome to CronosKernel for Exynos7870 Devices
J730X | J530X | J710X | J701X | G610X | A600X | J600X
Version : V5.0
Release : 1/13/2020
Warning : Me nor XDA Are responsible for any damage that might be caused after flashing any file provided here. Please take caution and be aware of what you are doing. And Always backup !
Click to expand...
Click to collapse
​
-- Features --
[x]Fake Enforcing (Permissive and shows enforcing)
[x]Compiled with Linaro 4.9.4
[x]ADB Insecure
[x]Fake KNOX
[x]Private Mod support
[x]RMM-KnoxGuard Free
[x]MultiCPU Governors
[x]Multi I/O Schedulers
[x]Multi TCP Algorithms
[x]Limited Wakelocks
[x]Dynamic Fsync 2.0
[x]FsyncToggle
[x]PowerSuspend 1.5
[x]UKSM V1.23
[x]Boeffla wakelock blocker v1.1.0
[x]StateNotifier & SysfsHelper
[x]Optimized ZSwap
[x]Optimized Deadline I/O
[x]Better Input Booster
[x]Quicker Doze entry
[x]Other improvments for Batterylife and performance
[x]Support Android 9.0 and Treble GSIs
[x]Reduced Wakelocks
[x]GPU/CPU Voltage dropped
[x]Improved GPU Utilization
[x]Improved standby
[x]Encryption Support for StockRoms
[x] Samsung ODM support (Official / unofficial)
[x] Treble Offline Charging (With proper samsung LPM implementation)
[x] J710 Bluelight filter support
[x] Patched J730 AOD bugs from samsung
[x] A600X/J600X Keystore updated and fixed
[x] Pie bootloader/modem support
[x] Supports ARM32/64 OneUI/Treble ROMs
[x] Custom scripts to improve ROM support
[x] Support for SpagetX nuke script
[x] Support for Vendor init.d shell scripts
[x] And much much more
The kernel supports HKTweaks to manage and control the kernel turntables. Download Here : Github
--How to install--
If you have flashed Root through any means other than magisk, Please uninstall it (SuperSU>Full unroot)
Open developer options (Press aboutphone > build number 7 times) Enable OEM Unlock (Google RMM if you had issues)
Flash TWRP Recovery that can be found in J730 Section
Fully Wipe internal storage and format data (Must for first time flashing TWRP)
Copy Kernel to your desired Location
Install Zip > Select kernel.zip
Reboot and wait
Kernel does not include Magisk. Download it here if you need it
--Basic Info --
The kernel has been fully refreshed and made from scratch to suite the everyday-changing Exynos7870 Android experience. with support for Treble Roms, OneUI Roms, Pie bootloaders and much more optimizations and improvements to improve both the user experience and developers who choose to use this kernel​
-- Credits --
@topjonhuw For Magisk
@geiti94 For patched SS libs​
And my Elite-Team for their contributions to my projects and being Awesome.
Download <> Changelog <> More info In second Post​

Downloads and changelogs
CronosKernel V5.0 1/13/2020
This version has been fully reworked and made from scratch, there are new/old features included. mostly its fixes to allow our kernel to work in Pie releases
WARNING : Please update your device to the latest available boot loader and modem. Devices that can be updated to Pie but running oreo bootlaoder is not going to have network.
Devices with too old bootloaders are not going to have keystore. UPDATE BEFORE YOUR REPORT A BUG
[x] Fully reworked and rebuilt from scratch
[x] based on J530FXWU5CSH7 pie source
[x] Supports J530X|J730X|J600X|A600X|J710X|J701X|G610X
[x] Compiled with linaro
[x] many compiler optimizations
[x] Disabled proca,defex,cp_secure,knox,tima,rkp,kap and other samsung security
[x] Fully permissive
[x] Disabled broken spectrum profiles
[x] AOSP specific fixes and optimizations
[x] proper sdfat driver support (for exFAT/fat32)
[x] full F2FS Support for DATA,CACHE
[x] All the previous ramdisk mods, loggers and tweaks
[x] reduced logging spam from AVC, HOTPLUG
[x] Fully disabled samsung Hotplug (Performance with no significant battery hit)
[x] Fixed an issue where 4 cores were stuck on offline
[x] CMDLINE patches for fake knox status
[x] CPU/DEVFREQ/MIF etc voltage control
[x] boeffla wakelock blocker
[x] custom default wakelock blocker list
[x] UKSM 0.1.2.3
[x] Powersuspend 1.8
[x] Dynamic Fsync
[x] Fsync/crc toggles
[x] unlocked tunables for stock governors
[x] toggle archpower and other sched improvments
[x] LZ4 Support
[x] improved block performance
[x] improved devfreq performance
[x] imrpvoed TCP performance
[x] improved memory performance
[x] Support for Pie bootloader devices
[x] wireguard support
[x] Improved CPU Overclocking
[x] GPU Control
[x] Samsung ODM support (Official / unofficial)
[x] Treble Offline Charging (With proper samsung LPM implementation)
[x] J710 Bluelight filter support
[x] Patched J730 AOD bugs from samsung
[x] A600X/J600X Keystore updated and fixed
[x] Pie bootloader/modem support
[x] Supports ARM32/64 OneUI/Treble ROMs
[x] Custom scripts to improve ROM support
[x] Support for SpagetX nuke script
[x] Support for Vendor init.d shell scripts
[x] And much much more
OneUI -
Download : AndroidFileHost
Size : 64.5 MB
MD5: 2ce69de1525b83fe83f4512efb65dc22
Treble -
Download : AndroidFileHost
Size : 63.6 MB
MD5: 1f6df083b148adc90a5fa15606cf066f
Treble Versions are meant to be used with AOSP roms (on both official and unofficial treble devices) . they have certain patches and MTP fixes
Old releases
HeliosPie V3.1 Update​- Updated base to latest pie source
- reworked and updated helios ramdisk tweaks
- Reverted old hacks to fix some bugs
- Performance and battery greatly improved
- F2FS enabled
- Spectrum profiles added by @@SiddhantNaik1731
- LZ4 Enabled
- GPU Performance Greatly improved
- Removed EliteTuner in favour of HKTweaks by @corsicanu
- Full CPU/GPU/DEVFREQ/MIF/CAMERA Voltage control and more
- Magisk V19.1 included
Download : AndroidFileHost
Size : 38.3 MB
MD5: 46dec1efb1f9ac305e859f9a99ca88f1
HeliosPie V3.0 Update​- Updated to Android Pie
- OneUI and GSI Support
- Disabled KnoxGuard (New RMM)
- Updated to EliteTuner V1.1
- 2AMP Charging
- And all the previous features and changes of HeliosKernel
Download : AndroidFileHost
Size : 42 MB
MD5: fc3831f0debedd9fe614798e77e005a6
HeliosPro V2.7 Update​
- Updated Ramdisk
- Fixed some performance and battery issues
- Fixed WiFi and Bluetooth on Stock J5/J7 Roms
- Magisk 18.1
- Linaro 7.4 Toolchain
Download : AFH
MD5 : 8db06bf5daa879dc790f749ac315ed6a
Size : 45.7MB
Old releases and changelogs
HeliosPro V2.6 Update​
This is TOUCHWIZ only. The new compiler greatly improves performance on both 8.0 and 8.1 Based roms.
Enjoy, i know im not making any roms due to time, but i can support this kernel.
Changelog :-
- J5 Removed 70HZ mod so fake displays can work
- Compiled with Linaro 6.1.1 Compiler
- Performance and battery greatly improved with new compiler
- Fixed custom ramdisk scripts
- Deodex Supported well with magisk
- GMS Blocker
- 99Killer service (kills gms in idle for better sleep)
- NFC Should work now
- More precise cpu voltage
- Magisk 18.0 Included
Follow the Full change log on the Github source.
Download : AFH
MD5 : 2b11e227741486bf41dceced6c96a66c
Size : 46.6MB
HeliosPro Kernel V2.5
Android 8.0/8.1 Only
J530F/G/Y/YM/FM/GM/S/L/K
J730F/FM/G/GM (And any J7 variant)
​Changelog :-
-Supports both 8.0 and 8.1.1 Stock/Ported TouchWiz Roms
- Updated drivers to latest J530F 8.1 Source
- Adoptable Storage (not tested)
- Encryption Support (on stock roms only)
- Improvements to GPU CPU Over clocking Thanks @renoxtv
- Ensure you have LATEST TWRP otherwise you wont be able to read Internal storage in TWRP
- Removed 160mhz GPU as it didnt work and caused issues
- Fixed CPU Undervolting (overvolting doesnt work well)
- GPU overclocking and Control now works on EliteTuner
- Updated Camera and WiFi to latest 8.1 Firmware
- Support for 3GB J5 2017 Variants
- Magisk 17.2 Included
- some other minor improvements to pretty much everything
Follow the Full change log on the Github source.
Download : AFH
MD5 : 8594de8b4f2e2292fa8b730093886ac1
Size : 47MB
old changelog
HeliosPro Kernel V2.0
Android 8.0/8.1 Only
J530F/G/S/L/K
J730F/FM/G/GM (And any J7 variant)
​
This can be used on any of my 8.0 Roms and tested on stock 8.1 Rom (does not break Simcard when rooting)
its based off multiple exynos7870 sources
P.S : GPU overclocking is not yet completed, you can use it manually with OxygenControl app
instead of EliteTuner app (included in zip)
P.S : J7 aod is basic until we get new Oreo drivers for J7
HeliosPro v2.0 Changelog
- CPU Overclock upto 1.7GHz and VoltageControl
- GPU OverClock Upto 1146GHz
- Memory Mangment improvments
- J5 2017 70Hz Refresh Rate
- MMC improvments
- Full Wakelock Control for wlan/bt and much more
- BoefflaWakelock Blocker With preconfigured WLs
- UKSM V1.2.3
- SecBattery control and Unstable current detection
- Powersuspend Driver for display
- Fsync Toggle
- Dynamic FSync
- Tons of I/O Schedulers
- Tons of CPU Governors
- StateNotifier Driver
- CPUFreq optimizations
- DisplayState hooks
- ondemand/conservative cache improvments
- Swap/VNSwap improvments
- WireGuard Support
- F2FS Support
- Frandom Support
- Muted useless debug msgs
- Tons other than can be tracked in commits
I/O Schedulers :-
- Maple
- BFQ
- ROW
- Fifo
- Fiops
- Sio
- SioPlus
- Tripandroid
- VR
- ZEN
CPU Governors :-
- Blu_Active
- CafActive
- hyper
- bioshock
- cultivation
- dancedance
- electrodemand
- impulse
- intellidemand
- ondemandX
- pegasusq
- smartass2
- smartmax
- wheatly2
Download : GoogleDrive
Source : Github​
RefinedKernel (7.0/7.1.1)
V2.7
-WireGuard Support
-HotSpot Fix for Note 8 port
-CPU Boot frequency reduced
-GPU/CPU Frequency improvments
-InputBooster Changes
-J7 Pro Flicker Fix/AOD
-Boosted charging limit
-Updated Ramdisk
-Magisk 16.3 included
J530F/G : GoogleDrive
J530Y/YM : GoogleDrive
J530FM/GM : GoogleDrive
Oxygen Kernel control : GoogleDrive
---------------------------------
V 2.6
-CPU/GPU Overclocking support
-Support for more variants
-Fixed Magisk resetprop conflict
-Disabled DM-Verity from source
-Fixed KNOX 0X0 PATCH
-Removed Audit Spams in log
-Disabled Samsung RMM
-Disabled RKP/KAP/TIMA From source
-Slight increase to charging current
-Inputbooster ~ 1.2GHz
-CPU OC upto 1700MHz
-GPU OC Upto 1146MHz
-Allow CPU To go as low as 200MHz
---------------------------------
-V2.5
-Add Support for J530FM/YM/GM/G
-Magisk V15.2
-Dynamic Fsync 2.0
-HTC Asynchronous Fsync
-PowerSuspend 1.5
-UKSM V1.23
-Boeffla wakelock blocker v1.1.0
-StateNotifier & SysfsHelper
-Optimized ZSwap
-Optimized Deadline I/O
-Better Input Booster
-Quicker Doze entry
-Other improvments for Batterylife and performance
J530F/J530G : GoogleDrive
J530Y/YM/GM/FM [2 FEB]: GoogleDrive
----------------------------------------------------
-V2.0 Note 8 port
Rebuilt the kernel from latest source code : J530FXXU1AQI3
Added CPU Governors
Added I/O Sched
Added TCP Algorithms
Added FakeKnox
Added ResetProp
Added 7.1.1 Support
Added CPU Improvments
Reduced Wakelocks
Added AOD Partial Support (Reverted in source due to dangerous screen flicker issue)
Download Link : --GoogleDrive--
----------------------------------------------------
-V1.0 Initial release
--DownloadLink--
--Mega--

F.A.Q
F.A.Q​
Q : Does this support Prometheus V2 ?
A : No, this only supports NEW OneUI roms released in august 2019 and up
Q : I dont have lockscreen working
A : you have a very old bootloader, update it
Q : I dot have working simcard
A : You have a very old bootloader/modem update them both
Q : What benefits Does this have over stock kernel ?
A : This kernel is aimed at Android enthusiasts who like to get the most out of their phones. But also is user friendly and pre customized for the average user to figure it out
Q : Can i use Kernel Auditor ?
A : Yes, but to utilized the full potential of this kernel including overclock and many more, you should use HKtweaks from here
Q : What is Overclocking ?
A : Basically, Slightly more performance For an extra consumption in battery. you can google it for more details
Q : Is it safe to overclock ?
A : ive tested the kernel on the Max over clock setting (Without turning off the 4 big cores) without any problems for a month
Q : What is SamsungHotplug ?
A : its a feature from samsung that Auto-Disables Inactive Big Cores to reduce power consumption. it has been disabled due to wasted performance
Q : Does this kernel Pass SafteyNet ?
A : Yes, The kernel has all the needed bypasses already so it can even bypass safteynet without Magisk
Q : Can i use Knox Apps ?
A : No, You cant use secure Storage, However it has PirvateMode Support built in (if your ROM supports it too)
Q : Can i use this on Stock Rom ?
A : Yes, it works on both Stock 9.0 and custom Roms made after August 2019​

As a final note, this kernel was made for J5 J7 at first. but it seems to be a popular choice for devs to port to their devices. so i figured to provide a version for most 7870 Devices.
This kernel was previously known as Helios 2.7 . it was available in previous J710 Roms. Please note that this is only designed to work one the current OneUI based roms.
if you want a full list of features. please either read the github post. or the changelog i left.
Enjoy

I already have installed v2.7 on j7 2016 with 8.1.0 can i install it on j7 2016 oreo stock rom?

Tnx. Nice working

Hi developer, J710FQ variant not working with your kernels. Can you add support to this variant please?

berkan 197 said:
Hi developer, J710FQ variant not working with your kernels. Can you add support to this variant please?
Click to expand...
Click to collapse
J710X means all J710 variants. Like F/FN/FQ/MN...

Elite tuner showind white screen and freezing. What to do?

I tried v3.0 with stock oreo rom.. it kept stuck up in booting up... Eventually over and hour i gave up...

ajbash007 said:
I tried v3.0 with stock oreo rom.. it kept stuck up in booting up... Eventually over and hour i gave up...
Click to expand...
Click to collapse
Same on Aosp Pie

ajbash007 said:
I tried v3.0 with stock oreo rom.. it kept stuck up in booting up... Eventually over and hour i gave up...
Click to expand...
Click to collapse
Lu Han said:
Same on Aosp Pie
Click to expand...
Click to collapse
It's only for OneUI based Touchwiz Pie Roms!!
Not for oreo roms!!

TRalperenTR said:
It's only for OneUI based Touchwiz Pie Roms!!
Not for oreo roms!!
Click to expand...
Click to collapse
I hate One Ui only 300 MB available of ram.

Sulltan Mehmood said:
I already have installed v2.7 on j7 2016 with 8.1.0 can i install it on j7 2016 oreo stock rom?
Click to expand...
Click to collapse
ajbash007 said:
I tried v3.0 with stock oreo rom.. it kept stuck up in booting up... Eventually over and hour i gave up...
Click to expand...
Click to collapse
Lu Han said:
Same on Aosp Pie
Click to expand...
Click to collapse
This is clearly a kernel make for ONEUI PIE roms as it is mentioned all over the thread.
this is not gonna work on AOSP or Oreo or Nougat
Akro7o7 said:
Elite tuner showind white screen and freezing. What to do?
Click to expand...
Click to collapse
Recheck the root permission and grant it again as magisk is known for delaying su permission sometimes.

Make one for j7 2016 oreo stock please

Fake enforcing doesn't work

Sulltan Mehmood said:
Make one for j7 2016 oreo stock please
Click to expand...
Click to collapse
Helios 2.6 is for Oreo and exist since last year:https://forum.xda-developers.com/ga...d-mods/kernel-heliospro-kernel-v2-6-t3905298/

pls. release a update

Update is necessary

***CLOSED***[KERNEL][EXYNOS][ThundeRStormS for Samsung Galaxy S20 series - Exynos only]

ThundeRStormS Galaxy S20 Exynos family for OneUI Q/R/S
SM-G980F, SM-G985F, SM-G981B, SM-G986B, SM-G988B
Compatibility notes :
Only for Android OneUI Q/R/S roms S20 Exynos family ROMs
AOSP is not supported !!!​
Kernel features:
- Linux 4.19.87
- Samsung source DEVA9
- Android 11 - OneUI 3.1 (to TS v1.8) / Android 12 - OneUI 4 (from TS v2.0)
- TTL Filter ON
- 64k TCP IP Window
- some debugs off
- USB serial added
- Samsung MTP ON
- Zmalloc page mapping OFF
- Wakelocks added
- Powersuspend 2.0 support
- Wireguard support
- Boeffla wakelocks added
- powereffcient workqueue support in CPU section
- CRC support in MISC section
- Fsync support in MISC section
- Geantle Fair Sleepers support im MISC section
- Frandom support
- Support File Blocker for some tune apps
- OC big CPU at 3016 MHz and Mid at 2600Mhz
- DTS (Device Tree Blob) for temperatures and OC, etc.
- I/O schedulers improvements
- CIFS and NTFS partition support
- disabled some Samsung security and FIPS
- Battery Store support
- Linux source improvements
- Added CPU tick 25 and 50 Hz - default set at 50 HZ
- Support Init.d scripts: /vendor/etc/init.d
- Support Battery Saver Mode
- Support DevFreq MIF min/max frequencies
- Disabled DVFS clock_lock (now max freq will not drop to 377MHz)
- Added Sustainable GPU freq and set at 455MHz (for doesn't drop freq in gamming below 455MHz)
- ThunderTweaks v1.1.0.4
- Magisk 24.1 Offcial build in kernel / or without Magisk (You can flash it manually - e.g. older version)
- Optimized for battery life
- Some upstreamed commits from newer Linux version : cpu, sched, ext4, f2fs, mm, kernel
- Compiled via Google Clang 14.0.1 toolchain
- Kernel use an AROMA installer to help guide you through the installation (Thx to EdZamber and yoanf26).
Recommended Apps:
To tweak most of the settings in the kernel, I recommend using ThunderTweaks app.
_________________________________________________
IMPORTANT INFORMATIONS:
1. WARNING: YOU UNDERSTAND THAT INSTALLING CUSTOM FIRMWARE/ROM/KERNEL IS AT YOUR OWN RISK!!!
2. YOUR WARRANTY CAN BE VOID.
"I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
Please do some research if you have any concerns about features included in this kernel before flashing it! YOU are choosing to make these modifications, and if you point
the finger at me for messing up your device, You can't blame me for this fact."
3. NO REQUESTS!!!
_________________________________________________
INSTALLATION PROCESS:
FOR STOCK ODEX/DEODEX ROMS - read carefully
FIRST - Clear cache apps like ThunderTweaks, Kernel Adiutor or MTweaks or another one in system app menager !!!
Backup SYSTEM, EFS, DTB, DTBO, DATA and KERNEL as always in TWRP !!!
Download the latest kernel version zip file
Use only not patched (magisk) recovery - kernel has magisk build-in
Flash the CLEAN ROM or Dirty FLash, next restore Your DATA and flash the kernel zip with root or not
Choose aroma selection
Reboot
ThunderTweaks app is installed in Your system.
PROBLEMS / BUGS:
No bugs.
Thanks for reports.
_________________________________________________
CREDITS :
- The Linux Kernel Archive for the Linux Patches https://www.kernel.org/
- Samsung Open Source Release Center for the Source code http://opensource.samsung.com/
- @osm0sis for Android Image Kitchen and anykernel2 https://forum.xda-developers.com/showthread.php?t=2073775
- Magisk and SuperSu Team for root method
- @evdenis Denis Efremov and Cruel Team for source, Samsung updates and help.
- MoRoGoKu, Anan1211, Pascua28, Corsicanu
- @ambasadii
- @edzamber and @yoanf26
- @TheMadScientist, @bartolomeo10, @touseef77, @okij, @enebro77, @tin2404 and tester group.
_________________________________________________
SOURCE of the kernel:
GitHub: https://github.com/ThunderStorms21th/S20-priv
_________________________________________________
Contributors:
@nalas
ThundeRStormS Team
_________________________________________________
DISCUSSION:
Links removed by moderator
_________________________________________________
Version Information:
Statsus : Stable
Current version : AiO v2.1 (All in One)
Release Date : 2022-02-15
_________________________________________________
DONATION:
If you liked my work, you can collaborate by giving thanks and with some donation to continue working hard.
Thank you very much to all.
Link removed by moderator
_________________________________________________
CHANGELOGS & DOWNLOADS in 2nd post
_________________________________________________

DOWNLOADS and CHANGELOGS
Changelogs:
ThunderStorms-Kernel-S-v2.1 : 15.02.2022 for OneUI4.x
- Linux 4.19.87
- Samsung source DEVA9
- Android 12 (S) | OneUI 4
- Some debugs off
- EMS, SCHED, VM & DTS improvements
- Linux source improvements
- READ_AHEAD_KB = 256
- Imported Mali drivers r33p0 from ARM source for ValHall
- ThunderTweaks v1.1.0.5
- Magisk 24.1 Offcial / or without Magisk (24101)
- support for SM-N986B/SM-N985F (Note 20 Ultra)
- Clang 14.0.1
- rest like in v2.0.1
ThunderStorms-Kernel-S-v2.0.1 : 24.01.2022 for OneUI4.x
- Linux 4.19.87
- Samsung source CUEL7
- Android 12 (S) | OneUI 4
- Some debugs off
- EMS, SCHED, VM & DTS improvements
- OC CPUs to 3016 MHz - big, 2600 MHz Mid
- Linux source improvements
- READ_AHEAD_KB = 256
- Some upstreamed commits from newer Linux version : cpu, sched, ext4, f2fs, mm, kernel
- EdYoBlue kernel installer is removed
- Support Battery Saver Mode
- Support DevFreq MIF min/max frequencies
- ThunderTweaks v1.1.0.4
- Magisk 23.1 Offcial / or without Magisk (23018)
- support for SM-N986B/SM-N985F (Note 20 Ultra)
- Clang 14.0.1
- rest like in v2.0
ThunderStorms-Kernel-S-v2.0 : 08.01.2022 for OneUI4.x
- Linux 4.19.87
- Samsung source CUEL7
- Android 12 (S) | OneUI 4
- Some debugs off
- EMS, SCHED, VM & DTS improvements
- OC CPUs to 3016 MHz - big, 2600 MHz Mid
- Linux source improvements
- READ_AHEAD_KB = 256
- Some upstreamed commits from newer Linux version : cpu, sched, ext4, f2fs, mm, kernel
- EdYoBlue kernel installer is removed
- Added CPU tick 25 and 50 Hz - default set at 50 HZ
- Support Battery Saver Mode
- Support DevFreq MIF min/max frequencies
- Disabled DVFS clock_lock (now max freq will not drop to 377MHz)
- Added Sustainable GPU freq and set at 455MHz (for doesn't drop freq in gamming below 455MHz)
- ThunderTweaks v1.1.0.4
- Magisk 23.1 Offcial / or without Magisk (23016)
- support for SM-N986B/SM-N985F (Note 20 Ultra)
- rest like in v1.8
ThunderStorms-Kernel-R-v1.8 : 15.12.2021 for OneUI3.x
- Linux 4.19.87
- Samsung source DUI5
- Some debugs off
- EMS, SCHED, VM & DTS improvements
- OC CPUs to 3016 MHz - big, 2600 MHz Mid
- Linux source improvements
- READ_AHEAD_KB = 256
- Some upstreamed commits from newer Linux version : cpu, sched, ext4, f2fs, mm, kernel
- EdYoBlue kernel installer is removed
- Added CPU tick 25 and 50 Hz - default set at 50 HZ
- Support Battery Saver Mode
- Support DevFreq MIF min/max frequencies
- Disabled DVFS clock_lock (now max freq will not drop to 377MHz)
- Added Sustainable GPU freq and set at 455MHz (for doesn't drop freq in gamming below 455MHz)
- ThunderTweaks v1.1.0.4
- Magisk 23.1 Offcial / or without Magisk (23015)
- support for SM-N986B/SM-N985F (Note 20 Ultra)
- rest like in v1.7
ThunderStorms-Kernel-R-v1.7 : 23.11.2021 for OneUI3.x
- Linux 4.19.87
- Samsung source DUI5
- Some debugs off
- EMS, SCHED, VM & DTS improvements
- OC CPUs to 3016 MHz - big, 2600 MHz Mid
- Linux source improvements
- EdYoBlue : READ_AHEAD_KB = 256; TS=256
- Some upstreamed commits from newer Linux version : cpu, sched, ext4, f2fs, mm, kernel
- Another initial settings for EdYoBlue and ThundeRStormS kernels
- Added CPU tick 25 and 50 Hz - default set at 50 HZ
- Support Battery Saver Mode
- Support DevFreq MIF min/max frequencies
- ThunderTweaks v1.1.0.4
- Magisk 23.1 Offcial / or without Magisk
- support for SM-N986B/SM-N985F (Note 20 Ultra)
- rest like in v1.6
ThunderStorms-Kernel-R-v1.6 : 16.11.2021 for OneUI3.x
- Linux 4.19.87
- Samsung source DUI5
- Some debugs off
- EMS, VM & DTS improvements
- OC CPUs to 3016 MHz - big, 2600 MHz Mid
- Linux source improvements
- EdYoBlue : READ_AHEAD_KB = 256; TS=256
- Some upstreamed commits from newer Linux version : cpu, sched, ext4, f2fs, mm, kernel
- Another initial settings for EdYoBlue and ThundeRStormS kernels
- Added CPU tick 25 and 50 Hz - default set at 25 HZ
- Support Battery Saver Mode
- Support DevFreq MIF min/max frequencies
- ThunderTweaks v1.1.0.3
- Magisk 23.1 Offcial
- support for SM-N986B/SM-N985F (Note 20 Ultra)
- rest like in v1.5
ThunderStorms-Kernel-R-v1.5 : 02.11.2021 for OneUI3.x
- Linux 4.19.87
- Samsung source DUI5
- Some debugs off
- EMS, VM & DTS improvements
- OC CPUs to 3016 MHz - big, 2600 MHz Mid
- Linux source improvements
- EdYoBlue : READ_AHEAD_KB = 256; TS=256
- Some upstreamed commits from newer Linux version : cpu, sched, ext4, f2fs, mm, kernel
- Another initial settings for EdYoBlue and ThundeRStormS kernels
- Magisk 23.1 Offcial
- support for SM-N986B (Note 20 Ultra)
- rest like in v1.4
ThunderStorms-Kernel-R-v1.4 : 22.10.2021 for OneUI3.x
- Linux 4.19.87
- Samsung source DUI5
- Some debugs off
- EMS, VM & DTS improvements
- OC CPUs to 3016 MHz - big, 2600 MHz Mid
- Linux source improvements
- EdYoBlue : READ_AHEAD_KB = 256; TS=256
- Some upstreamed commits from newer Linux version : cpu, sched, ext4, f2fs, mm, kernel
- Another initial settings for EdYoBlue and ThundeRStormS kernels
- rest like in v1.3
ThunderStorms-Kernel-R-v1.3 : 5.10.2021 for OneUI3.x
- Linux 4.19.87
- Samsung source DUH5
- Support Powersuspned v2.0
- Support Wireguard
- Some debugs off
- Support File Blocker for some tune apps
- Support all stack's CPU governors
- I/O sched : ZEN, SIO, FIOPS, MARPLE
- EMS, VM & DTS improvements
- OC CPUs to 3016 MHz - big, 2600 MHz Mid
- Linux source improvements
- EdYoBlue : READ_AHEAD_KB = 256; TS=256
- Another initial settings for EdYoBlue and ThundeRStormS kernels
- rest like in v1.2
ThunderStorms-Kernel-R-v1.2 : 25.09.2021 for OneUI3.x
- Linux 4.19.87
- Samsung source DUH5
- Support Powersuspned v2.0
- Support Wireguard
- Some debugs off
- Support File Blocker for some tune apps
- I/O sched cfq improvements
- EMS & DTS improvements
- OC CPUs to 3016 MHz - big, 2600 MHz Mid
- Linux source improvements
- EdYoBlue : READ_AHEAD_KB = 256; TS=256
- Another initial settings for EdYoBlue and ThundeRStormS kernels
- rest like in v1.1
ThunderStorms-Kernel-R-v1.1 : 19.09.2021 for OneUI3.x
- Linux 4.19.87
- Samsung source DUF9
- Support Powersuspned v2.0
- Support Wireguard
- Some debugs off
- Support File Blocker for some tune apps
- I/O sched cfq improvements from Pixel 4
- EMS & DTS improvements
- OC CPUs to 3016 MHz - big, 2600 MHz Mid
- Linux source improvements
- EdYoBlue : READ_AHEAD_KB = 256; TS=256
- Another initial settings for EdYoBlue and ThundeRStormS kernels
- rest like in v1.0
ThunderStorms-Kernel-R-v1.0 : 10.09.2021 for OneUI3.x
- Linux 4.19.87
- Samsung source DUF9
- TTL Filter ON
- 64k TCP IP Window
- some debugs off
- USB serial added
- Samsung MTP ON
- Zmalloc page mapping OFF
- Wakelocks added
- Boeffla wakelocks added
- powereffcient workqueue support in CPU section
- CRC support in MISC section
- Fsync support in MISC section
- Geantle Fair Sleepers support im MISC section
- Frandom support
- CIFS and NTFS partition support
- disabled some Samsung security and FIPS
- Battery Store support
- Linux source improvements
- Support Init.d scripts: /vendor/etc/init.d
- ThunderTweaks v1.1.0.2
- Magisk 23.0 Offcial build in kernel
- Optimized for battery life
- Compiled via Google Clang 8.0.8 toolchain
- Kernel use an AROMA installer to help guide you through the installation (Thx to EdZamber and yoanf26)
_________________________________________________
DOWNLOAD:
Links removed by moderator
_________________________________________________

reserved #2

Thanks trying this now will this kernel improve gaming performance s20ultra

very good I had already used on the S10+ thx Bro

@nalas
Well done bro, awesome work

Many thanks a kernel for the s20 series. You sir are a legend. I'll definitely try this.

i love you

any chance of this supporting lineageos?

1Michael23 said:
any chance of this supporting lineageos?
Click to expand...
Click to collapse
Sorry but it will not work on every aosp rom, bcose camera drivers must be copied from aosp and it can break on some rom like pixel, dotOs, etc.
Aosp has a lot of rom features against kernel features which can help with performance and battery life.
On S10 was the same...

Normusmaxamus said:
Many thanks a kernel for the s20 series. You sir are a legend. I'll definitely try this.
Click to expand...
Click to collapse
Hehe, thx. Not such big... are better kernels. Enjoy and I hope so everything is good.

nalas said:
Hehe, thx. Not such big... are better kernels. Enjoy and I hope so everything is good.
Click to expand...
Click to collapse
No problem all good so far great work.

Does this kernel support Wireguard VPN?

Lashe said:
Does this kernel support Wireguard VPN?
Click to expand...
Click to collapse
Nope

nalas said:
Nope
Click to expand...
Click to collapse
Thank you for answer. It will be nice if you can add this feature in future.

Lashe said:
Does this kernel support Wireguard VPN?
Click to expand...
Click to collapse
i will add in next release, is added in test version

Does i need rom what dont install on phone, if my rom on phone have magisk can i flash this kernel, my photos and files delete when i flash?

Denys00 said:
Does i need rom what dont install on phone, if my rom on phone have magisk can i flash this kernel, my photos and files delete when i flash?
Click to expand...
Click to collapse
You can flash normal, magisk is only ramdisk patched not kernel source so You can use Your installed magisk manager. Zip file will install latest 23 magisk repo - auto.

nalas said:
You can flash normal, magisk is only ramdisk patched not kernel source so You can use Your installed magisk manager. Zip file will install latest 23 magisk repo - auto.
Click to expand...
Click to collapse
Thx and one more ask my photos has been deleted when i flash,?

Denys00 said:
Thx and one more ask my photos has been deleted when i flash,?
Click to expand...
Click to collapse
nope, only if YOu format sdcard or flash via ODIN - data partition will be deleted or if YOu flash vbmeta Ynd HOME_CSC You will not loose Your data