[EXPERIMENT] how to get root access on vivo y51l. - Vivo Y51L ROMs, Kernels, Recoveries, & Other Devel

Hey guys, finally you can get root access on your vivo y51l. However this method is only tested on CyanogenMod 12.1, and will be tested on other roms too within few days.
WARNING
* I'm not responsible for bricked devices, dead SD cards,
* or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about Rooting your device.
* Before flashing it! YOU are choosing to make these modifications.
1- CyanogenMod 12.1
*Whats working:-
-booting
-touchscreen
-Internet
-Camera
-LED flash light
-Bluetooth
*Whats not working:-
Everything except above things.
2- MiUi 9
*Whats working:-
Booting
Touchscreen
Wifi
Bluetooth
Camera
LED flash light
Internet
*Whats not working:-
Everything except above things.
NOTE 1- Backup your current data, system, boot.img and any important data before doing anything.
NOTE 2- After flashing this file you will not be able to use custom recovery. If you want to use any custom recovery, you have to reflash your backed up boot.img using fastboot.
*How to flash:-
1- Download the img file from below link.
2- Rename downloaded file to boot.img
3- Boot into fastboot mode.
4- Flash boot.img by typing "fastboot flash boot boot.img"
5- Reboot to system.
*How to flash on MiUi 9:-
https://youtu.be/dshjCSErtzE
DOWNLOAD'S
1- for CyanogenMod 12.1
https://mega.nz/#F!lKJDEZTa!1_kCvDk63djtx3rSksQzbQ
2- For MiUi 9
https://forum.xda-developers.com/android/development/root-root-vivo-y51l-t3744877

If brick
I am new in this so please tell me If my vivo y51l is bricked then what i have ti do.

Hey, can you tell the modifications you did in the boot.img? I want to root vivo y55L, but it can't be rooted because of the kernel, I think. Any help would be appreciated. Thanks btw.

Related

[PORT][ROM] unofficial cm12.1 for vivo y51l.

For updates go to this thread:-
https://forum.xda-developers.com/android/software/port-cynogenmod-12-1-vivo-y51l-t3738412
* YOUR WARRANTY IS NOW VOID.
* I'm not responsible for bricked devices, dead SD cards,
* or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about features included in this ROM.
* Before flashing it! YOU are choosing to make these modifications.
Hello guys, today i am going to share with you a cm12.1 cistom rom which is based on Android 5.1.1 lollipop. I have ported this rom, and this is a beta release.
What Works
- Booting!
- Display
- Touchscreen
- Bluetooth
- Storage
- Brightness
- RIL(no audio)- fixed in update1
What Doesn't Work?
- WIFI
- Audio-(fixed in update1)
- Camera
- videos playback-(fixed in update1)
- LED flash
- FM radio
How to flash:- (by @jithin sankar)
https://drive.google.com/file/d/1FGYsrMCFQVFO69UeOXKpZCnmWC6WAF-L/view?usp=drivesdk
Screenshot--
https://mega.nz/#F!4PIEEaZa!MPIlr9-qDh33QjxIdUkGpQ
Installation--
1- Download the rom and boot.img and put both into
2- Boot into twrp
3- Backup your existing rom and data then reboot to recovery
4- Now go to wipe>advance wipe> select delvik cache, cache, data and system. And swipe to confirm wipe. And roboot to recovery.
--**Attention** this step is necessary otherwise you will not be able to flash the rom.
5- Go to mounts and mount *system*.
6- Then go to install>select sdcard and select the rom and flash it.
7- Do not reboot to system now.
8- Go to install and chose install image. And select the boot.img then twrp will promot you to select which partition to flash select boot, and flash.
9- Reboot to system.
Credits.
Original developer of the rom @ED300
@Naveen Singh for his twrp and flashing guide. @jithin sankar for making videos tutorial on how to flash and overview.
And @me for porting.
And everyone who helped me in porting this rom.
how to apply update-
1- Copy the patchupdate.zip into your sdcard
2- Boot into recovery.
3- select patchupdate.zip
4- swipe to flash.
UPDATE'S
Patch 1-
Audio (fixed)
Video playback (fixed)
No audio output in hands-free (fixed)
MIC (fixed)
DOWNLOAD'S
ROM link-
BETA1:-
https://mega.nz/#F!sPolFCZS!aUae7j3N1_YqvrPoN9wJig
Update1-
https://mega.nz/#F!gPwiAaRZ!b_z8r4I4ZabfW38CgT7NmQ
Hit the thanks button and Stay tuned bug fixes are coming soon....
No signal r coming with sim...
manish_503 said:
No signal r coming with sim...
Click to expand...
Click to collapse
Wipe cache, art cache, and flash boot.img again or do a Clean flash again and directly flash boot.img without booting into the system.
Jio sim not working...shows mobile network not available....only sim 2 working for outgoing & incoming calls...no internet connecting with both sims....z camera not opening showing ''Camera won't start. Plz check the camera permissions allowed or restart your cell phone''
But audio & video playing well after flash patch...there r many bugs...plz fix if possible!!! THANKS
Thank you
Plezzz fix all bugs and update in naught or marshmallow
pinjariasif68 said:
Plezzz fix all bugs and update in naught or marshmallow
Click to expand...
Click to collapse
https://forum.xda-developers.com/android/software/port-cynogenmod-12-1-vivo-y51l-t3738412
When Camera bug fix
asifpinjari said:
When Camera bug fix
Click to expand...
Click to collapse
Its already fixed.
will this work for y51? I only got y51
Pls reply thanks
Can it be flash on vivo y91?

[ZE620KL/Android 9][TREBLE] COMPLETE GUIDE: Unlocking, Rooting & Flash GSI + Fixes

[ZE620KL/Android 9][TREBLE] COMPLETE GUIDE: Unlocking, Rooting & Flash GSI + Fixes
Unlocking bootloader to Flashing GSI (Asus Zenfone 5 [ZE620KL] / Android 9.0)
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
About :
The last guide could leads to soft brick, as the instructions were not clear nor the files not supported for Android 9.0.
Here is a complete guide with TWRP 3.3.0 for Android 9.0, clear instructions and multiple fixes for GSI.
It has been tested on stock version v16.0615.1903.92.​
Requirements :
- A stock version V16.0610.XXXX.XX or higher
- A phone on Android 9.0 (not 8.0!)
- A fully working USB cable
- Latest ADB / Fastboot drivers
- Bootloader unlocker (download latest from Asus website or from here)
- TWRP 3.3.0 image
- Android9EncryptionDisablerZE620KL.zip
- Magisk v19.3​
Instructions :
Unlocking Bootloader
1. Backup all your important data.
2. Install the bootloader unlocker APK, and follow the steps. You will loss your warranty here, and it will factory reset your data
3. If there is any issue here, go into your stock recovery (volume down + power button) and factory reset.​
Installing TWRP
4. Shutdown your device & boot in fastboot mode using volume up + power button.
5. Check that the connection between your device and your computer by typing this in your command line :
Code:
fastboot devices
6. Flash TWRP recovery using :
Code:
fastboot flash recovery <twrp_name>.img
7. Now reboot in recovery mode using :
Code:
fastboot oem reboot-recovery
8. In TWRP, select Wipe > Format Data > enter "yes" and confirm
9. Return to the main menu, select Reboot > Recovery
10. Do 8. & 9. and again
11. Using TWRP or ADB, install Android9EncryptionDisablerZE620KL.zip (on TWRP, go into Install > find Android9EncryptionDisablerZE620KL.zip > Install zip)
If everything has gone successfully, you now have a custom recovery.
As for some GSIs, a patched boot partition may cause bootloop, you should try installing Magisk after installing the GSI. If you want to keep your stock ROM, go directly to "Magisk Installation" section.​Installing a GSI
This step may vary depending on the different GSIs distribution. I assume you install Havoc OS v2.7 GSI which actually works on this device.
1. Backup all your important data using TWRP backup.
2. Select the arm64-aonly GSI image you want, and move it on your external SD.
3. Wipe Data, Dalvik, and Cache.
4. Go back in the main menu of TWRP, and reboot to recovery.
5. Remove Magisk if it was previously installed, by using its uninstaller script.
6. Flash the GSI to system partition.
7. Boot and perform a factory reset.​
Installing Magisk
1. Add the Magisk zip archive to your external storage.
2. Boot into TWRP recovery, and install the zip.
3. Enjoy!​
Bug fixes:
Insufficient storage in the system partition to flash GApps : Download your OpenGApps archive on your external SD, and use MagicGApps 2018.9.23 to install GApps.
Auto-Brightness doesn't work: Download framework-res__auto_generated_rro.apk from here.
Using a root explorer or command-line, push the APK to /vendor/overlay.
Then run the following command in a rooted terminal or ADB shell:
Code:
chcon u:object_r:vendor_overlay_file:s0 /vendor/overlay;chcon u:object_r:vendor_overlay_file:s0 /vendor/overlay/framework-res__auto_generated_rro.apk
My camera doesn't work well (green tint on face camera) and/or the app doesn't boot: If Asus Camera doesn't launch on your GSI, you should probably edit your /system/build.prob file.
You need to edit ro.product.model, ro.product.brand, ro.product.name, ro.product.device, ro.product.manufacturer & ro.build.product properties to be:
Code:
ro.product.model=ASUS_X00QD
ro.product.brand=asus
ro.product.name=WW_Phone
ro.product.device=ASUS_X00QD
ro.product.manufacturer=asus
ro.build.product=ZE620KL
You can instead use Google Camera mod (port from Arnova8G2 & modded by 5Z community, thanks to them!), which works well (edit: there is a bug on HavocOS, we can't access settings).​Bonus:
- You can reinstall DTS Headphone:X here.
- For booting your kernel in Permissive mode, check here
Sources:
TWRP 3.3.0 : On GitHub
If you need help or if you want to help on ZE620KL development go here:
https://t.me/Zenfone5Dev
(We will continue to update & help here though.)
Many thanks to all of the Zenfone 5 community (particularly Emincan, Pandolfi and Lmajkej),
Phhusson & Erfan for their works on GSI, and Shakalaca for its work on TWRP 3.3.0!​
On HavocOS v2.8 GSI (13-08-2019):
It works:
- Almost anything
- Adaptive Brightness (after manual fix)
- Notch overlay
- DTS Headphone X (after manual installation)
- NFC
- Face unlock
- Stock camera (after manual fix)
- Magisk
- SDcard access
It doesn't works:
- VoLTE / VoWifi
- Google Camera settings
- External speaker amplifier (NXP amp)
- APT-X / APT-X HD bluetooth
- Low microphone in normal use
- No microphone in calls (only headphone microphone works)
GCam settings
But my google camera keep crashing when I want to go into camera settings
Hi thanks for this tutorial, this is my first time rooting my phone. I'm encountering a problem with my sd card after installing havoc os, everytime i try to move, save or any write functionality i do to my sd card, it always says the android version isn't compatible. I could still see my files from my sd, but everytime it asks permission it always say this
bentley0928 said:
But my google camera keep crashing when I want to go into camera settings
Click to expand...
Click to collapse
Same issue here. I will update the thread when I will find a more working GCam port (perhaps, this GCam port works well on ZenUI)
Jolo110 said:
Hi thanks for this tutorial, this is my first time rooting my phone. I'm encountering a problem with my sd card after installing havoc os, everytime i try to move, save or any write functionality i do to my sd card, it always says the android version isn't compatible. I could still see my files from my sd, but every time it asks permission it always say this
Click to expand...
Click to collapse
It's a known issue, the GSI maintainer @vince31fr is working on it. I don't have it, but I can advice you to use Solid File Manager, which works like a charm on my device.
"- No microphone in calls (only headphone microphone works)"
Funny... I'm on stock latest firmware and I have this issue, so I thought I try something new, and this has that issue. It can't be a coincidence. Something is ****ed up with this device.
Wonder if this will work for the Zenfone 5 Lite (or 5Q)? I wanna root my 5Q so bad haha
Thanks for the great instructions! Steps 1 through 11 worked perfectly for me, then I installed LineageOS (lineage-17.0-20191231-UNOFFICIAL-treble_arm64_avN.img) and it works properly. Then when I go back to TWRP and install Magisk v20.1 it reboots into an endless Lineage bootup logo animation (not boot loop). I can get an adb shell, but now also the external SD card has become invisible. Any suggestions?
UPDATE: I switched over to the patched Magisk version from PHH (https://forum.xda-developers.com/zenfone-5/general/ze620kl-add-support-to-evey-android-9-t3966918) and everything works perfectly now!
Hi!! I thanks for these instructions you gave. I know this post is a bit older. But is the only one I think could help me.
I got an ZE620KL and I'm trying to root this device. I have some experience in unlocking bootloader and rooting devices. But this one... Is giving me a lot of work. Researching in a lot of forums and websites I tried a lot of things with no success. In theory, is just install the official apk provided by ASUS and run the application. But the app doesn't work for a long time as I researched (error accusing network problem). I tried unlock via fastboot commands but I always got stucked by "remote: permission denied" even with latest drivers and ADB Fastboot installed. And yes... I let my device with no one security feature enabled and didn't worked. I tried everything even after wiped data / cache and factory reset and no progress.
In my researches, I realized something about 'oem unlock'. It appears to be the key to solve this. And I guess the tool to work with this is the damn unlock tool from ASUS which don't work! Also, I've heard about workaround with Magisk by flashing a custom recovery to achieve the root. Magisk no longer supports zip files to flash. Only '.img' and '.tar' files. I'd like to find some light here... I don't know what to do. I appreciate any help!
Hello do I need to flash Android9EncryptionDisablerZE620KL.zip if Im gonna flash a non-GSI custom ROM? Or its only for GSI Treble ROM?
[email protected] said:
Hi!! I thanks for these instructions you gave. I know this post is a bit older. But is the only one I think could help me.
I got an ZE620KL and I'm trying to root this device. I have some experience in unlocking bootloader and rooting devices. But this one... Is giving me a lot of work. Researching in a lot of forums and websites I tried a lot of things with no success. In theory, is just install the official apk provided by ASUS and run the application. But the app doesn't work for a long time as I researched (error accusing network problem). I tried unlock via fastboot commands but I always got stucked by "remote: permission denied" even with latest drivers and ADB Fastboot installed. And yes... I let my device with no one security feature enabled and didn't worked. I tried everything even after wiped data / cache and factory reset and no progress.
In my researches, I realized something about 'oem unlock'. It appears to be the key to solve this. And I guess the tool to work with this is the damn unlock tool from ASUS which don't work! Also, I've heard about workaround with Magisk by flashing a custom recovery to achieve the root. Magisk no longer supports zip files to flash. Only '.img' and '.tar' files. I'd like to find some light here... I don't know what to do. I appreciate any help!
Click to expand...
Click to collapse
Im not sure if you still have your phone or you have successfully unlocked bl. but I found an updated version of their tool which works.
*tried unlocking from android 10 not working, it says device model not supported*
Zenfone 5 Unlock BL
cf100clunk said:
Thanks for the great instructions! Steps 1 through 11 worked perfectly for me, then I installed LineageOS (lineage-17.0-20191231-UNOFFICIAL-treble_arm64_avN.img) and it works properly. Then when I go back to TWRP and install Magisk v20.1 it reboots into an endless Lineage bootup logo animation (not boot loop). I can get an adb shell, but now also the external SD card has become invisible. Any suggestions?
UPDATE: I switched over to the patched Magisk version from PHH (https://forum.xda-developers.com/zenfone-5/general/ze620kl-add-support-to-evey-android-9-t3966918) and everything works perfectly now!
Click to expand...
Click to collapse
Do you still have the patched Magisk zip file, the original link in the post seems not working

[TREBLE][ROM][GUIDE][10.0] MIUI 12 OneOS Stable for J730X (No Laggy) (Sim working)

Code:
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
I own nothing in these. roms, kernels, gsis. All credits down below.
--------------------------------------
Supported devices:
J730*/J530*/G610*/J710*/J701*
Instructions
Make sure you have latest TWRP or OrangeFox (i recommend OrangeFox)
Download and flash ProjectSpagetX (first flash Create Vendor 2.0, reboot recovery and flash ProjectSpagetX)
Download OneOSMi8Lite-Aonly-10-20201203-nippongsi.img (downloaded file is "gz" you need to extract img file) flash as "system" image.
Download and flash Cronos Kernel 5.0 (cronos kernel more stable in MIUI than other kernels) "i tested it a lot weeks"
Now you can reboot system... but you cant login google services because this is MIUI Global Rom
--------------------------------------
TO FIX CANT LOGIN GOOGLE SERVICES;
Now you opening play store and you clicking Sign in... But nothing happens.. Now
Now first download the Google Play Services
And Gmail. Install two of them.
And reboot now open Gmail and login your account easily!
--------------------------------------
How to Root?;
Flash Magisk canary and reboot system (now system will gets infinite boot)
Make hard reboot (volume down + power)
And enter recovery, Flash magisk canary again, reboot and system seccussfully boots.
--------------------------------------
Bugs;
You cant control brightness
Phone stucks when you use Stock MIUI Camera's mods (use footej for no stuck)
if you found a bug reply down below to let other people know.
Whats working;
You can login Mi account
Rom is smooth
Sim card working
OneOS Settings working
Themes working have good themes by OneOS
Phone not crash (if you using another kernel system will crash's sometimes)
I passed CTS Profile on magisk
--------------------------------------
CREDITS
Project Spaget - Cronos Kernel by @ananjaser1211
MIUI 12 OneOS GSI by nippongsi
My main language is not English sorry for wrong words.
Auto reboot and why have a pattern key..sorry for my bad english
https://sourceforge.net/projects/amber-gsi/files/Nusantara-11/Nusantara_v2.5-11-arm64-ab-Vanilla.img.xz/download
stuck on boot anim at samsung galaxy j7 pro
ilyas UG said:
https://sourceforge.net/projects/amber-gsi/files/Nusantara-11/Nusantara_v2.5-11-arm64-ab-Vanilla.img.xz/download
Click to expand...
Click to collapse
me stuck boot logo
ilyas UG said:
https://sourceforge.net/projects/amber-gsi/files/Nusantara-11/Nusantara_v2.5-11-arm64-ab-Vanilla.img.xz/download
Click to expand...
Click to collapse
A/B GSI's cant work with Project Spaget.
can I use screen lock?
Saitoh Michio said:
can I use screen lock?
Click to expand...
Click to collapse
No, Miui forces to fingerprint lock.
cant flash nippongsi, file too big for the system
leecherleechleech said:
cant flash nippongsi, file too big for the system
Click to expand...
Click to collapse
repartitioner
Türkçe olarak da anlatabilir misin?
hello can i get rom for samsung galaxy J7 Device j7y17lte.
Xander11 said:
hello can i get rom for samsung galaxy J7 Device j7y17lte.
Click to expand...
Click to collapse
Yes
ichbinahmet said:
Yes
Click to expand...
Click to collapse
can i get links pls
Xander11 said:
can i get links pls
Click to expand...
Click to collapse
Links on Instructions panel
ichbinahmet said:
Code:
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
I own nothing in these. roms, kernels, gsis. All credits down below.
--------------------------------------
Supported devices:
J730*/J530*/G610*/J710*/J701*
Instructions
Make sure you have latest TWRP or OrangeFox (i recommend OrangeFox)
Download and flash ProjectSpagetX (first flash Create Vendor 2.0, reboot recovery and flash ProjectSpagetX)
Download OneOSMi8Lite-Aonly-10-20201203-nippongsi.img (downloaded file is "gz" you need to extract img file) flash as "system" image.
Download and flash Cronos Kernel 5.0 (cronos kernel more stable in MIUI than other kernels) "i tested it a lot weeks"
Now you can reboot system... but you cant login google services because this is MIUI Global Rom
--------------------------------------
TO FIX CANT LOGIN GOOGLE SERVICES;
Now you opening play store and you clicking Sign in... But nothing happens.. Now
Now first download the Google Play Services
And Gmail. Install two of them.
And reboot now open Gmail and login your account easily!
--------------------------------------
How to Root?;
Flash Magisk canary and reboot system (now system will gets infinite boot)
Make hard reboot (volume down + power)
And enter recovery, Flash magisk canary again, reboot and system seccussfully boots.
--------------------------------------
Bugs;
You cant control brightness
Phone stucks when you use Stock MIUI Camera's mods (use footej for no stuck)
if you found a bug reply down below to let other people know.
Whats working;
You can login Mi account
Rom is smooth
Sim card working
OneOS Settings working
Themes working have good themes by OneOS
Phone not crash (if you using another kernel system will crash's sometimes)
I passed CTS Profile on magisk
--------------------------------------
CREDITS
Project Spaget - Cronos Kernel by @ananjaser1211
MIUI 12 OneOS GSI by nippongsi
Click to expand...
Click to collapse
I've tried according to the steps above but the result is also a bootloop.
already created vendor, install projectspaget_v3, install OneOSMi8lite-Aonly-.IMG > Install System Image, Install CronosKernel_V5 the result is the same but my bootloop is using j730g/ds.
There is another solution so I can use the rom, what if you do a full backup via twrp OneOSMiLite8-Aonly so we can just restore via twrp.
Melisata said:
I've tried according to the steps above but the result is also a bootloop.
already created vendor, install projectspaget_v3, install OneOSMi8lite-Aonly-.IMG > Install System Image, Install CronosKernel_V5 the result is the same but my bootloop is using j730g/ds.
There is another solution so I can use the rom, what if you do a full backup via twrp OneOSMiLite8-Aonly so we can just restore via twrp.
Click to expand...
Click to collapse
no spaget v3, you should use spaget X
sim not working fo me!
Led light work in j7 prime?

[ROM] AOSP 13 - SODP [13.0.0_r2]

Android 13 for Xperia XZ Premium​
Code:
/*
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What's AOSP?
AOSP is Android as Google publish without any modifications. .
​What's working :
Boots​
Bluetooth​
Fingerprint​
Wi-Fi​
Camera​
Camcorder​
Video Playback​
Audio​
Sensors​
Flash​
GPS​
Encryption​
Offline Charging​
Whats not working?
Notification LED​
IMS/VOLTE​
Half Screen issue(For some users) - Need testing if still persist​
Test and Report(with logcat)​
Instructions to install up ROM :
Flash latest available Stock ROM(47.2.A.10.107) and boot into it once.
Reboot to Fastboot
Download the OEM Image from HERE, Extract and Flash it. (V5B)
fastboot flash oem SW_binaries_for_Xperia_Android_11_4.14_v5b_yoshino.img
Flash the userdata,boot and system image (Will wipe all the userdata).
fastboot flash userdata userdata.img
fastboot flash boot boot.img
fastboot flash system system.img
Install Magisk/Gapps(Optional).
Reboot
Downloads :
G8142 : https://sourceforge.net/projects/xzp/files/SODP13/android-13.0.0_r2/G8142/
G8141 : https://sourceforge.net/projects/xzp/files/SODP13/android-13.0.0_r2/G8141/
Kernel Source Code: https://github.com/sonyxperiadev/kernel
Changelog :
08/18/2022 :
Initial release for G8142
08/19/2022:
Initial release for G8141
08/22/2022
Notification LED Fixed
Switched to custom lights hal
Kernel upstreamed to 4.14.260
Good
support gcam?
Markutthel said:
support gcam?
Click to expand...
Click to collapse
It does, you need to find the compatible one.
Shujath said:
It does, you need to find the compatible one.
Click to expand...
Click to collapse
okeyy thx my bruhh
mmmmm,how to raw support?
ooh, brilliant. Unfortunately I have single SIM/8184.
I still have to wait. I am really happy about it.
Can you provide GAAPs and TWRP recovery? Link?
Gordon1979 said:
ooh, brilliant. Unfortunately I have single SIM/8184.
I still have to wait. I am really happy about it.
Can you provide GAAPs and TWRP recovery? Link?
Click to expand...
Click to collapse
Mostly tomorrow, I will share the single sim versions.
Sure, will share the links and steps to install gapps too ..
Great work!
Alright, Links for Single sim variant are up.
Steps to install GAPPS :
Install the attached recovery via fastboot
fastboot flash recovery recovery.img
Boot into recovery mode by pressing and holding power button and volume down button at the same time.
Sideload the gapps or install it from SD card as it cannot decrypt the internal storage yet.
I am using Litegapps (https://sourceforge.net/projects/litegapps/files/litegapps/arm64/33/lite/v2.6/) (Recovery version).
Flash the Gapps and the attached fix for gapps(REQUIRED).
Reboot
other GAAPs for Android 13 cannot be found.
Or does GAAPs for Android 12L work too ?
Gordon1979 said:
other GAAPs for Android 13 cannot be found.
Or does GAAPs for Android 12L work too ?
Click to expand...
Click to collapse
Litegapps are the only one I found currently.
a13 is very in very early stage and other gapps will adapt to it soon.
Do you know if it is possible to install GAAPs12 on Android 13?
Gordon1979 said:
Do you know if it is possible to install GAAPs12 on Android 13?
Click to expand...
Click to collapse
I dont think so....
Litegapps 14, is this for Android 14???
LiteGapps - Browse /litegapps/arm64/34/lite/v2.6 at SourceForge.net
LiteGapps is a custom gapps which is ,small, friendly and complete.
sourceforge.net
Gordon1979 said:
Litegapps 14, is this for Android 14???
LiteGapps - Browse /litegapps/arm64/34/lite/v2.6 at SourceForge.net
LiteGapps is a custom gapps which is ,small, friendly and complete.
sourceforge.net
Click to expand...
Click to collapse
Yes lol :d
@Shujath
After the install, no recovery comes from the device.
Factory reset not possible
I can't restore my APPs, SMS, ..... everything.
Can you remove the search bar on the homescreen?
The display on/off in seconds cycle is also there.
how to flash i don't understand
Flash latest available Stock ROM(47.2.A.10.107) and boot into it once.
Reboot to Fastboot
fastboot flash oem SW_binaries_for_Xperia_Android_11_4.14_v5b_yoshino.img
fastboot flash userdata userdata.img
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
Boot into recovery mode by pressing and holding power button and volume down button at the same time.
go in to Sideload
flash over PC , Litegapps
Flash the Litegapps fix over TWRP
Reboot
ROM Updated :
22nd Aug'22
Changelog :
Notification LED Fixed
Switched to custom lights hal
Kernel upstreamed to 4.14.260
Download links in first post.

Development [Recovery][UnOfficial][A12][A13] OrangeFox Recovery 11.0

Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Download:
*.ZIP LINK
*.TAR LINK
Bugs
Decryption will only work if no password/PIN/pattern is set in Android.
You tell me.
How to install
Spoiler: If you dont have a custom recovery installed
[*]Make sure your bootloader is already unlocked and OEM unlock is enabled, otherwise the installation will fail.
[*]Download and install Samsung Drivers
[*]Download the latest *.tar for your phone
[*]Download Odin, from example from https://downloads.corsicanu.ro/samsung/
[*]If not done before, flash disabled VBMeta with Odin in AP slot
[*]Turn off your phone, connect it to PC and reboot to download mode by holding down Volume up, Volume down and power button at the same time.
[*]Open Odin and check if your device is detected, then untick "Autoreboot" in its settings.
[*]Put the tar file you downloaded into the AP tab
[*]Click start and wait for the installation to finish, Odin will show PASS
[*]Now hold down Power button and Volume down for about 10 seconds to force reboot the device
[*]Immediately after the screen goes black release the keys and hold down Volume up and Power button at the same time until you enter OrangeFox (You may need to release the keys after about 20-30secs due to the "unlocked bootloader" warning)
[*]If you properly followed all the steps you should now see the OrangeFox menu.
[*]I HIGHLY recommend to flash services disabler right after you enter OrangeFox to disable forced encryption and stock recovery restoration.
[*]IF YOU ALREADY HAVE TWRP OR OLDER ORANGEFOX BUILDS INSTALLED, JUST DOWNLOAD AND FLASH THE ZIP FILE IN RECOVERY
Spoiler: If you do have a custom recovery installed
[*]Download the *.zip file
[*]Flash it in recovery.
[*]Once its done flashing, phone will reboot on its own to recovery
[*]If you properly followed all the steps you should now see the OrangeFox menu.
Sources: https://github.com/RisenID/android_device_samsung_a52sxq
Credits:
Orangefox team
@BlackMesa123 for the TWRP trees and general help and support.
@corsicanu for updating multidisabler for A12 and providing download links for Odin, USB drivers, etc.
Thanks to all my testers, you know who you are <3
Hey guys, after a lot of thpught, I have decided to drop official support, and provide unofficial builds, so that I can give you guys the best possible builds that I can, so there will be no more official ofox builds from me, but there will be unofficial ones. Thanks for understanding, hope you like these builds.
Changelogs
R11.1
- Fix /vendor backup restoring
- Updated kernel to DVK5
- Support Android 13 decrypt with no password
- Fix /efs, /sec_efs backup
- Fix fastbootd
- Disable stock recovery patching in /vendor
-Bundle Magisk Delta instead of Magisk
Reserved

Categories

Resources