Develop Bugs

flashed tmobile firmware on and ls980 g2.. can i fix it? please help

I flashed a stock 4.4.2 t-mobile firmware to my sprint ls980.. is there anyway to get any ls980 firmware back on it? i use it for tmobile which is why i flashed it but seen a few threads on how to unlock the sim and now im stuck. did i ruin the phone? or could i at least get it to work through tmobile with the firmware i flashed? i cant even get it to connect to google play. wifi works tho

Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
Stand by
Good luck

First: Grab the ZVE Tot file
Second: Flash it in download mode.
Good luck, flashing in download mode is rather a pain to do.

G2 Ls980 with tmobile firmware
Fnord12 said:
First: Grab the ZVE Tot file
Second: Flash it in download mode.
Good luck, flashing in download mode is rather a pain to do.
Click to expand...
Click to collapse
I have tried flashing a stock sprint fw but it fails because Flashtool says the mobile phone I have is a tmobile model!!.

mikon73 said:
I have tried flashing a stock sprint fw but it fails because Flashtool says the mobile phone I have is a tmobile model!!.
Click to expand...
Click to collapse
There is a DLL file that is generic that should overcome that problem.

Facing the same problem..please help
I've also done the same thing just a little bit different.
i flashed D802 (international version) kdz file over my sprint g2 (Model is LS-980) but it does not work, when i turn on the phone I can't even complete the setup and the phone restarts. touch panel is also not working right.
Now i've downloaded the stock .tot rom for sprint version and trying to flash it using lg flash tool in download mode. But it does not flash it. It detects my phone as D802 and gives the error about the model number does not match
I need help getting it back to LS-980

looking for that lg g2 sprint generic .dll file
secret.animal said:
There is a DLL file that is generic that should overcome that problem.
Click to expand...
Click to collapse
Supposedly there's a stock .kdz which I can use to extract the .dll from, but I haven't found any stock .kdz file so far.
So, this generic .dll sounds great and one of my last options left. I'll appreciate if you can point me to that file. I'm going to try to find it.
Thanks a lot!!! :good:

https://docs.google.com/file/d/0B_F3sA56Gm2HMTVXejZla3R5RDg/edit?usp=docslist_api

Tried it but failed
secret.animal said:
docs.google.com/file/d/0B_F3sA56Gm2HMTVXejZla3R5RDg/edit?usp=docslist_api
Click to expand...
Click to collapse
I've tried this .dll file with both the stock ls980zvc and ls980zve .tot firmwares.
but the flash tool gives this error "CrossDL [D802] to [LS980]. SWversion"
Is there any way around this?

Success
Successfully fixed this problem. My phone is back to life again
I explained the complete problem and the process to fix it in this post:
http://forum.xda-developers.com/sprint-g2/help/solution-flashed-wrong-firmware-lg-g2-t3056632

tauheed90 said:
Suucessfully fixed this problem. My phone is back to life again
Click to expand...
Click to collapse
Share the love for anyone that does a search will find it without having to ask.

I'm restricted by xda
secret.animal said:
Share the love for anyone that does a search will find it without having to ask.
Click to expand...
Click to collapse
The procedure I used is described and explained in this post and as i am a new member here, xda restricts me to post external links his is the the best i could do
http://forum.xda-developers.com/sprint-g2/help/solution-flashed-wrong-firmware-lg-g2-t3056632

Solution: Downgrade from MM to LP by using lg up

first of all i want to say that i already seen similiar thread like mine but it is all about using tot method but my thread is all about lg up .
First of all it"s not my work,full credit goes to autoprime. On autoprime thread in the first page i dont see the updated dll file,he gives the update few page later. So i think people face problem during downgrade like me, So thats why i am opening this thread but if moderator thinks its not nedded, please delete this thread.
so here are the Steps
download kdz for your phone from here http://lg-firmware-rom.com/
install dll file from attachement
installing lg up and how to connect your phone...follow the instruction from here http://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
make sure you install dll file before lg up.
Open LGUP on your computer, click on upgrade and point it towards your LP KDZ. Close LGUP and re-open LGUP and select refubrish.. Make sure you select REFURBISH this will do a full wipe, tick BIN file. Press Start. Now you are done and hope it helps people, who are face trouble during downgrade like me also don't forget to hit thanks if it's helpful to you.

OMG I LOVE YOU... I've tried everything, almost lost all hope, thank you thank you thank you! Works like a charm!

Vuka22 said:
OMG I LOVE YOU... I've tried everything, almost lost all hope, thank you thank you thank you! Works like a charm!
Click to expand...
Click to collapse
thanks

Sorry this tool working on G3 F400K?

Thanks bro. Good job.

KHUN VEASNA said:
Sorry this tool working on G3 F400K?
Click to expand...
Click to collapse
I think it should be work because both have same chipset 8974 but not sure it will work or not.. .because the dll for d855...you can try use your kdz and the given .dll .....but still i am saying i am not sure.

Anik49 said:
I think it should be work because both have same chipset 8974 but not sure it will work or not.. .because the dll for d855...you can try use your kdz and the given .dll .....but still i am saying i am not sure.
Click to expand...
Click to collapse
Yes it worked for my f400k. Thanks you so much.

Im Stuck in MM after the update to 6.0 Will any of these firmwares work for the D 850 ? thanks

louvass said:
Im Stuck in MM after the update to 6.0 Will any of these firmwares work for the D 850 ? thanks
Click to expand...
Click to collapse
You have to use lg d850 firmware.

Anik49 said:
You have to use lg d850 firmware.
Click to expand...
Click to collapse
yea i followed the link from the OP and put in my imei and it said no firmware avail. so where do we get this? for At&t d850?

killerskincanoe said:
yea i followed the link from the OP and put in my imei and it said no firmware avail. so where do we get this? for At&t d850?
Click to expand...
Click to collapse
http://storagecow.eu/index.php?dir=Xda/LG+G3/Stock/AT&T+D850/
Here i think you will find d850 stock tot file...

Anik49 said:
first of all i want to say that i already seen similiar thread like mine but it is all about using tot method but my thread is all about lg up .
First of all it"s not my work,full credit goes to autoprime. On autoprime thread in the first page i dont see the updated dll file,he gives the update few page later. So i think people face problem during downgrade like me, So thats why i am opening this thread but if moderator thinks its not nedded, please delete this thread.
so here are the Steps
download kdz for your phone from here http://lg-firmware-rom.com/
install dll file from attachement
installing lg up and how to connect your phone...follow the instruction from here http://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
make sure you install dll file before lg up.
Open LGUP on your computer, click on upgrade and point it towards your LP KDZ. Close LGUP and re-open LGUP and select refubrish.. Make sure you select REFURBISH this will do a full wipe, tick BIN file. Press Start. Now you are done and hope it helps people, who are face trouble during downgrade like me also don't forget to hit thanks if it's helpful to you.
Click to expand...
Click to collapse
Works like a charm for me thanks alot.. mine was LG G3 F460L korean variant. from MM to LP im back to Go, i decided to go for LP due to no proper root in MM.

Anik49 said:
first of all i want to say that i already seen similiar thread like mine but it is all about using tot method but my thread is all about lg up .
First of all it"s not my work,full credit goes to autoprime. On autoprime thread in the first page i dont see the updated dll file,he gives the update few page later. So i think people face problem during downgrade like me, So thats why i am opening this thread but if moderator thinks its not nedded, please delete this thread.
so here are the Steps
download kdz for your phone from here http://lg-firmware-rom.com/
install dll file from attachement
installing lg up and how to connect your phone...follow the instruction from here http://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
make sure you install dll file before lg up.
Open LGUP on your computer, click on upgrade and point it towards your LP KDZ. Close LGUP and re-open LGUP and select refubrish.. Make sure you select REFURBISH this will do a full wipe, tick BIN file. Press Start. Now you are done and hope it helps people, who are face trouble during downgrade like me also don't forget to hit thanks if it's helpful to you.
Click to expand...
Click to collapse
OMG! you're the man! All this time, i've been installing the LGUP before the dll. no one said it's the other way round. Thanks a ton!

How do I register the DLL file? I am running Windows 7 64-bit and I get this error when trying to register using regsvr32 in both system32 and syswow64 folder.
The module "LGVS985_20140620_LGFLASHv160.dll" was loaded but the entry-point DllRegisterServer was not found. Make sure that "LGVS985_20140620_LGFLASHv160.dll" is a valid DLL or OCX file and then try again.

dannyx4112 said:
How do I register the DLL file? I am running Windows 7 64-bit and I get this error when trying to register using regsvr32 in both system32 and syswow64 folder.
The module "LGVS985_20140620_LGFLASHv160.dll" was loaded but the entry-point DllRegisterServer was not found. Make sure that "LGVS985_20140620_LGFLASHv160.dll" is a valid DLL or OCX file and then try again.
Click to expand...
Click to collapse
Sorry but I am also using Windows 7 64bit everything works fine here

Anik49 said:
Sorry but I am also using Windows 7 64bit everything works fine here
Click to expand...
Click to collapse
You were able to install the DLL posted in this thread using regsvr32?

dannyx4112 said:
You were able to install the DLL posted in this thread using regsvr32?
Click to expand...
Click to collapse
Yes I just install it....click and it install.

Anik49 said:
Yes I just install it....click and it install.
Click to expand...
Click to collapse
Ok I think i solved that problem.. But now when I try to download the KDZ using my IMEI from the link you gave it says:
Model:LGVS985WK
Suffix:AVRSWH1
Latest Firmware:
No Firmware Found Yet
To Request Firmware:
Copy above information and send us in this Contact Form
Can I use any KDZ for VS985?

dannyx4112 said:
Ok I think i solved that problem.. But now when I try to download the KDZ using my IMEI from the link you gave it says:
Model:LGVS985WK
Suffix:AVRSWH1
Latest Firmware:
No Firmware Found Yet
To Request Firmware:
Copy above information and send us in this Contact Form
Can I use any KDZ for VS985?
Click to expand...
Click to collapse
Verizon firmware http://storagecow.eu/index.php?dir=Xda/LG+G3/Stock/Verizon+VS985/

Anik49 said:
Verizon firmware http://storagecow.eu/index.php?dir=Xda/LG+G3/Stock/Verizon+VS985/
Click to expand...
Click to collapse
Thank you for your help, much appreciated. I have been running into this problem when trying to refurbish 47a or 48a. When LGUP is waiting 120 seconds for restart (about 80% in LGUP), my phone just keep restarting without completing the installation. It keeps bootlooping and then LGUP keeps waiting for my phone to restart. LGUP will say 100% but my phone is just bootlooping constantly.

Downgrade from MM to LL with LGUP is possible!

Just wanted everybody to know that you CAN downgrade your MM LG G4 for Verizon by using LGUP.
And this is how...
1). Download all The Files Below!
1) Firmware Files - Click HERE!
Or Here LGKDZ.com for your exact match KDZ for your model
2) Download LG Drivers - LG Drivers Here - 10.9 Mb
2.1)Verizon Drivers (Verizon Only)LG_VZW - 7.8 Mb
3..LGUP can be found on this website LG UP DOWNOAD
You have to sign into one of your accounts and like the page for them to open the downloads in the middle of the page.
4. install the drivers then the .msi file for LGUP. Usually there is a DLL file and the LGUP application, install the .DLL file then install LGUP.
5. First make sure that your phone is showing up on LGUP, if not make sure you have USB debugging enabled and the you are connected with MTP.
6. Find your .kdz file, and don't press start VERY IMPORTANT!!, Exit out of the application and then REOPEN LGUP and your 13b.KDZ should still be in the box at the bottom.
7. Now just press start and wait for it to do it's magic.
And now your back on LL and you can get back to rooting this phone.
And just so people know it is not possible to downgrade from LL to KK, it will brick your phone for some reason, and trust me I had to send mine back and get a knew one, nothing would get it to work again!
So that's how you get back to LL from MM, which seems to be the only way to have root at the moment...
One more thing, I was able to transfer the files for the effortless root on MM but you can't do any send_command.exe commands because it just says FAIL. but it did switch the system software from Official to Modified so it did something just not what I wanted it to do....

If there's anyone wondering why this works, it's because both the 13b and 24c kdz's both have the same qfuse number, so the bootloader accepts both without bricking. If Verizon ever puts out an update that increments the qfuse value and you take it, you won't be able to downgrade to 13b or 24c.

I have the kdz file but it wont let me put it on lgup. It's looking for a .tot file. Help would be greatly appreciated
Nevermind. Figured it out

would this work with h811

mrewn said:
would this work with h811
Click to expand...
Click to collapse
This is the Verizon VS986 LG G4 section .

shoes22 said:
If there's anyone wondering why this works, it's because both the 13b and 24c kdz's both have the same qfuse number, so the bootloader accepts both without bricking. If Verizon ever puts out an update that increments the qfuse value and you take it, you won't be able to downgrade to 13b or 24c.
Click to expand...
Click to collapse
Thank you for the info! Just curious: how do you check the value of qfuse?

I did this on a Canadian variant H812 and it worked. Rooted right after and that worked too. I am a happy camper.
I loaded H81210n.
Anyone reading do note that I did not use the Verizon files above.
---------- Post added at 06:39 PM ---------- Previous post was at 06:34 PM ----------
duvelsuper said:
I have the kdz file but it wont let me put it on lgup. It's looking for a .tot file. Help would be greatly appreciated
Nevermind. Figured it out
Click to expand...
Click to collapse
What you must do is tick the update and select the kdz file. Then close LGUP, open it again and select refurbish and kdz file should be there. Start the load.
This phone with L and root is perfect. No M for me until root (if it happens). Really enjoy having the changed DPI with root and no permanent notification for Priority mode.

You can DL from here, without "liking" anything. http://www.droidopinions.com/download-lgup-tool/

Colchiro said:
You can DL from here, without "liking" anything. http://www.droidopinions.com/download-lgup-tool/
Click to expand...
Click to collapse
Or get it from this XDA thread: http://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803 where those other sites probably got it from .

divineBliss said:
Or get it from this XDA thread: http://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803 where those other sites probably got it from .
Click to expand...
Click to collapse
*edit* sorry did not mean to quote the person above me. I'm asking about actually getting from MM back to LP
Hate to ask this but has anyone verified this? I'm wanting to do this to mine tonight but I don't have near the experience a lot of others do here.

I did this without any problems at all
phonepie said:
*edit* sorry did not mean to quote the person above me. I'm asking about actually getting from MM back to LP
Hate to ask this but has anyone verified this? I'm wanting to do this to mine tonight but I don't have near the experience a lot of others do here.
Click to expand...
Click to collapse
I did this without any problems at all

It's very easy. Just load stock kdz with LGUP. I even rooted and all that after.
Sent from my LG-H812 using Tapatalk

tulio25 said:
I did this without any problems at all
Click to expand...
Click to collapse
thanks!
---------- Post added at 12:21 AM ---------- Previous post was at 12:20 AM ----------
milan187 said:
It's very easy. Just load stock kdz with LGUP. I even rooted and all that after.
Sent from my LG-H812 using Tapatalk
Click to expand...
Click to collapse
thanks!

silly question but will i lose all data on my phone if I do this?

stephen293 said:
silly question but will i lose all data on my phone if I do this?
Click to expand...
Click to collapse
I haven't done it just yet. And I know I'm not the smartest here. But to my knowledge yes you will lose everything. So always good to back up all your files. I've got all my photos backed up to google photos. over 5000 lol. But yeah from what I understand it's the same as doing a factory reset except instead of factory resetting back to MM you're factory resetting to LP.

stephen293 said:
silly question but will i lose all data on my phone if I do this?
Click to expand...
Click to collapse
(Request to a moderator below my response to stephen293)
OK, I did mine last night and using the refurbish mode as said does in fact delete all data.
((TO MODERATOR CAN WE GET THE ORIGINAL POST UPDATED TO INCLUDE THAT TO LOCATE THE KDZ FILE YOU NEED TO FIRST TICK THE UPGRADE CIRCLE)) I found it down the thread, But just figured it would be easier for others if it was included in the original post. Thanks

Big ups to everyone who made this happen!

Link not working kdz site down
Azweezey said:
Just wanted everybody to know that you CAN downgrade your MM LG G4 for Verizon by using LGUP.
And this is how...
1). Download all The Files Below!
1) Firmware Files - Click HERE!
Or Here LGKDZ.com for your exact match KDZ for your model
2) Download LG Drivers - LG Drivers Here - 10.9 Mb
2.1)Verizon Drivers (Verizon Only)LG_VZW - 7.8 Mb
3..LGUP can be found on this website LG UP DOWNOAD
You have to sign into one of your accounts and like the page for them to open the downloads in the middle of the page.
4. install the drivers then the .msi file for LGUP. Usually there is a DLL file and the LGUP application, install the .DLL file then install LGUP.
5. First make sure that your phone is showing up on LGUP, if not make sure you have USB debugging enabled and the you are connected with MTP.
6. Find your .kdz file, and don't press start VERY IMPORTANT!!, Exit out of the application and then REOPEN LGUP and your 13b.KDZ should still be in the box at the bottom.
7. Now just press start and wait for it to do it's magic.
And now your back on LL and you can get back to rooting this phone.
And just so people know it is not possible to downgrade from LL to KK, it will brick your phone for some reason, and trust me I had to send mine back and get a knew one, nothing would get it to work again!
So that's how you get back to LL from MM, which seems to be the only way to have root at the moment...
One more thing, I was able to transfer the files for the effortless root on MM but you can't do any send_command.exe commands because it just says FAIL. but it did switch the system software from Official to Modified so it did something just not what I wanted it to do....
Click to expand...
Click to collapse
Hey sorry but the www.lgkdz.com doesn't work. Is there another site we can find all lg firmware to downgrade for our exact lg variant match....

From OP second 1), try : http://storagecow.eu/index.php?dir=Xda/LG+G4/
or check the XDA G4 section for your variant.

Thank you for your response. I did actually download the H812 kdz from storagecow however when I put it in the LGUP tool it read as an error in the tot file. I'm not sure what happened or where I went wrong. I'm so confused at this point and without my G4 being unuseable at this time. I also wanted to ask if the kdz you directed me to are in fact the file I need to go back to LP from MM?

NEED TOT file and .dll H811

can anyone share me the TOT file for LG G4 H811. i searched the entire internet and i cant find it.
Thanks

themaskofwraith said:
can anyone share me the TOT file for LG G4 H811. i searched the entire internet and i cant find it.
Thanks
Click to expand...
Click to collapse
what for,?

I rooted ny phone and changed build.props model name. And now i can't boot.

raptorddd said:
what for,?
Click to expand...
Click to collapse
hi canu pls share tot file. thanks

themaskofwraith said:
hi canu pls share tot file. thanks
Click to expand...
Click to collapse
therrs no tot file . only kdz

Can you use ADB / Fastboot? Do you have USB debugging enabled on your phone? Maybe you can pull the build.prop file, modify it and then push it back.

themaskofwraith said:
hi canu pls share tot file. thanks
Click to expand...
Click to collapse
can you enter download mode.??
press vol up then connect usb cable if yes.. then download your phone variant KDZ and flash it using LGUP program to go back to stock firmware and fix if not booting.

raptorddd said:
can you enter download mode.??
press vol up then connect usb cable if yes.. then download your phone variant KDZ and flash it using LGUP program to go back to stock firmware and fix if not booting.
Click to expand...
Click to collapse
LG UP doesnt recognize the device and says unknown model. bcz i changed model name in buildprops. And i cant change it back bcz i cant boot and stuck on LG Logo. Thats is the reason i wanna try tot file method

themaskofwraith said:
LG UP doesnt recognize the device and says unknown model. bcz i changed model name in buildprops. And i cant change it back bcz i cant boot and stuck on LG Logo. Thats is the reason i wanna try tot file method
Click to expand...
Click to collapse
as far as i know ther isnt any TOT.

He can't use LGUP because the model name is changed in build.prop.

raptorddd said:
as far as i know ther isnt any TOT.
Click to expand...
Click to collapse
Never thought u can brick a device by changing model name. Do u have any idea on how can i get this device to work .

themaskofwraith said:
Never thought u can brick a device by changing model name. Do u have any idea on how can i get this device to work .
Click to expand...
Click to collapse
not sure. i know ive seen post just like yours . that edited build.prop and phone no longer worked.. maybe do a search and try to read and see if they did found a solution for it.. sorry good luck.

raptorddd said:
not sure. i know ive seen post just like yours . that edited build.prop and phone no longer worked.. maybe do a search and try to read and see if they did found a solution for it.. sorry good luck.
Click to expand...
Click to collapse
Thanks i searched the internet i dont think there is a fix. need to take it to the LG Store i guess. i have Never seen a android phone that doesnt let you get into fastboot until LG G4.

themaskofwraith said:
Thanks i searched the internet i dont think there is a fix. need to take it to the LG Store i guess. i have Never seen a android phone that doesnt let you get into fastboot until LG G4.
Click to expand...
Click to collapse
search herei n the lg g4 forum.

LGUP TOT
my problem is that LGUP only reads TOT files so my KDZs don't work. I also have the LG h811 build.

DellyBoi18 said:
my problem is that LGUP only reads TOT files so my KDZs don't work. I also have the LG h811 build.
Click to expand...
Click to collapse
you got it the wrong way.. LGUP uses KDZ only.. you need to uncompress kdz zip file.. the open LGUP. select upgrade then on lower bar browse file .. close LGUP open it up and select refurbished and start...:good:

raptorddd said:
you got it the wrong way.. LGUP uses KDZ only.. you need to uncompress kdz zip file.. the open LGUP. select upgrade then on lower bar browse file .. close LGUP open it up and select refurbished and start...:good:
Click to expand...
Click to collapse
I always uncompress rar/zip files unless otherwise instructed. LGUP only seeks for TOT files in my experience unless I am using the wrong version or something

DellyBoi18 said:
I always uncompress rar/zip files unless otherwise instructed. LGUP only seeks for TOT files in my experience unless I am using the wrong version or something
Click to expand...
Click to collapse
as far as i know inky KDZ and flashtools uses TOT.
heres is
https://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803

raptorddd said:
as far as i know inky KDZ and flashtools uses TOT.
heres is
https://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803
Click to expand...
Click to collapse
I figured it out. I typed * in the "File Name:" text box and pressed enter and everything showed.

2AA is rolling out!

2AA is rolling out, mine updated on the 18th from 29A.
Not much info about the update,
"Software Version: VS9862AA
The current software update gives you the most up to date Android™ security patch on your device."
form Verizon site.

Lame... Where's 7.0 or even better... 7.1?!

Force an update?
My phone is still on 24C is there a way I can force an update?

eltea said:
My phone is still on 24C is there a way I can force an update?
Click to expand...
Click to collapse
Mine got the update but after two days back on 5.1. Battery Life was awful

Anyone got a KDZ yet? Got a phone that locked on boot a day after the update. Standard fixes didn't work and can't use previous KDZ as it stops at 5% or 6%

Would also like to know if anyone has successfully downgraded from 2AA and if they can provide a KDZ.

Did you use LGUP to get back to 13B from the new 2AA using the 13B KDZ file for Vs986?
WAIDroid said:
Mine got the update but after two days back on 5.1. Battery Life was awful
Click to expand...
Click to collapse
---------- Post added at 11:40 PM ---------- Previous post was at 11:34 PM ----------
I have used the 13B VS986 KDZ file in the past to downgrade to 13B. Is that file not working for people now to downgrade from 2AA back to 13B (aside from the one person in a bootloop).
LudicrousPeed said:
Would also like to know if anyone has successfully downgraded from 2AA and if they can provide a KDZ.
Click to expand...
Click to collapse

divineBliss said:
Did you use LGUP to get back to 13B from the new 2AA using the 13B KDZ file for Vs986?
Click to expand...
Click to collapse
Yep but i had trouble as it would close while trying to downgrade but with my searching i looked at THIS and the .DLL File fixed my issue.

Awesome! This should help a lot of people.
WAIDroid said:
Yep but i had trouble as it would close while trying to downgrade but with my searching i looked at THIS and the .DLL File fixed my issue.
Click to expand...
Click to collapse

If the File ever needs to be re-uploaded let me know
Edit: Just Uploaded anyways so have fun (The .DLL is NOT A Virus!)
LINK

I posted a link to your fix in https://forum.xda-developers.com/ve...to-ll-lgup-t3322616/post72034093#post72034093
Maybe you want post more details there or watch that thread.
WAIDroid said:
If the File ever needs to be re-uploaded let me know
Click to expand...
Click to collapse

WAIDroid said:
Yep but i had trouble as it would close while trying to downgrade but with my searching i looked at THIS and the .DLL File fixed my issue.
Click to expand...
Click to collapse
Excellent. Lifesaver!
Confirmed working. Downgraded from the dreaded 2AA to 13B using LGUP. Before using LGUP though, I placed the new .DLL file in the correct folder as shown here (DLL link available in video description) https://www.youtube.com/watch?v=w4RSEholcuM then followed the instructions here (make sure to follow as step #6 says, and exit out of LGUP then reopen before starting) https://forum.xda-developers.com/verizon-g4/general/downgrade-mm-to-ll-lgup-t3322616

upgrade from 29A to 2AA, no much difference that I noticed.

much thanks.I just got a g4 used today and it was upgraded to 2AA but this downgrade saved me

WAIDroid said:
If the File ever needs to be re-uploaded let me know
Edit: Just Uploaded anyways so have fun (The .DLL is NOT A Virus!)
LINK
Click to expand...
Click to collapse
Thanks very much to WAIDroid for the new .dll file. It was hanging up on the downgrade from 2AA, but that fixed it!

Help please unlocking GSM radios on LG G4 with VS9862AA
Hello, a family member received their phone back from LG with a replaced motherboard due to the boot loop issue. We got it back with the VS9862AA software version (Build Number MRA58K).
Can anyone one point me to instructions on what to do to get the GSM radios unlocked so they can use the phone on AT&T or T-Mobile? I remember doing the install to 6.0 Marshmallow maybe a year or more ago when it wasn't available yet officially, and that one had the unlocked bootloader and GSM radios unlocked. So I'm somewhat familiar with the process, I just need to go back and revisit my notes I made about the ordeal.
Has there been any improvements to make this process easier if we just want the GSM radios unlocked? Any help would be very, very appreciated. Thanks in advance!!

LudicrousPeed said:
Excellent. Lifesaver!
Confirmed working. Downgraded from the dreaded 2AA to 13B using LGUP. Before using LGUP though, I placed the new .DLL file in the correct folder as shown here (DLL link available in video description) https://www.youtube.com/watch?v=w4RSEholcuM then followed the instructions here (make sure to follow as step #6 says, and exit out of LGUP then reopen before starting) https://forum.xda-developers.com/verizon-g4/general/downgrade-mm-to-ll-lgup-t3322616
Click to expand...
Click to collapse
I am having this problem now, but youtube says this video is no longer available. What do I need to do with this dll?
Edit: Ok, so I searched my pc for LGUP_8994 and found a dll file of the same name in C:\Program Files (x86)\LG Electronics\LGUP\model\8994 so I replaced that file with the one found in this thread. Now all is well, and I have successfully downgraded from 2ba!

Can someone give me a link for the dll file for the 2ba update. I tried with the YouTube video but it's no longer available and can't find it anywhere. Please and thank you

Should be towards the end of this thread.
https://forum.xda-developers.com/verizon-g4/general/downgrade-mm-to-ll-lgup-t3322616
Just go here instead....
https://forum.xda-developers.com/showpost.php?p=72034262&postcount=10
Don't forget to hit the thanks button
mofeck said:
Can someone give me a link for the dll file for the 2ba update. I tried with the YouTube video but it's no longer available and can't find it anywhere. Please and thank you
Click to expand...
Click to collapse

EDIT: Never mind, i got it now.
Why the LgUp asks me for a tot file and not kdz? Did i got a wrong version of lgup? Or im doing it wrong? I'm new to LG any help wold be apreciatte it. Thanks