Lost my stock charger. Where can I buy the exact same volt/amp (5.3V/2.5A) charger? - Lenovo ZUK Z2 (Plus) Questions & Answers

Just what the title says. Need to buy a charger which can charge my phone at 5.3V/2.5A just like the original charger. It'd be great if u could find an original charger rather than a different one.

Related

Travel charger

I had a question about a charger - I'm interested in getting a second charger for the Vibrant. I see that the charger that comes with the Vibrant says it has an output of 5.0V and 0.7A.
If I have an old LG charger that has an output of 5.1V and 0.7A, would that work. Could it damage the battery in my Vibrant, in anyway.
Thanks.
Not sure about your old charger, but it should work. Try it out at your own risk though.
I did want to comment on the chargers for the Vibrant. The phone seems to want a lot of current to charge properly. I was using an older 5V 500mA charger that served me well with my G1 and older BB Pearl. I had the Vibrant on it and it wouldn't charge fully. I also noticed the same thing when I would hook-up the vibrant to my notebook (typically 500mA max per port).
The good news is that there are a lot of cheap 5V 1A chargers on eBay. Just make sure to check a charger's spec before buying one.
$1.75 wall charger - http://cgi.ebay.com/US-AC-Power-USB...er_MP3_Player_Accessories&hash=item4aa03f4b9a
I also bought 5V 1A car chargers and mini USB to micro USB adapters so that I can use my old USB to mini USB cables when I am on the go.
$2.40 car charger - http://cgi.ebay.com/1000mA-1A-USB-C...er_MP3_Player_Accessories&hash=item4399e189d1
Charge only $1 - http://shop.ebay.com/i.html?LH_BIN=...r&_dmpt=PDA_Accessories&_trksid=p3286.c0.m301
Charge + Data $2 - http://shop.ebay.com/i.html?_nkw=mi...adapter&_osacat=0&_trksid=p3286.c0.m270.l1313
I have used my iphone charger a couple times. Very small letters on the back but I think it says it is 1.0A. Worked fine bit I went back to my vibrant charger. I also found a car charger at a circle K for $9.99. Probably could of got one a little cheaper on ebay but it was there and i needed a charge...lol
Sent from my Samsung Vibrant using XDA App
Vegastouch said:
I have used my iphone charger a couple times. Very small letters on the back but I think it says it is 1.0A. Worked fine bit I went back to my vibrant charger. I also found a car charger at a circle K for $9.99. Probably could of got one a little cheaper on ebay but it was there and i needed a charge...lol
Sent from my Samsung Vibrant using XDA App
Click to expand...
Click to collapse
Tried my old charger .. it works but is really slow compared to the one that came with the Vibrant. Probably going to end up purchasing an extra one for when I travel.
Personally I don't mind something charging slower when I travel as long as I'm getting more power to the phone than I'm using of course.
Monoprice has 1000mA
Anyone has experience with this wall charger from monoprice? (can't link, please look up Product ID: 6767)
It's rated at 1000mA. The stock charger that came with the vibrant is 700(I think). Will extra 300mA damage my phone?
sonnyg95 said:
Anyone has experience with this wall charger from monoprice? (can't link, please look up Product ID: 6767)
It's rated at 1000mA. The stock charger that came with the vibrant is 700(I think). Will extra 300mA damage my phone?
Click to expand...
Click to collapse
The extra 300mA will not damage the phone. Most smart phones require 700mA-1A to charge properly. But be careful, cheapo charger has potential to fry your phone. Anytime I buy a charger from ebay or cheap vendor, I plug it in to my old MP3 player for a week before I use it with my newer devices.
I have the same one that you see on monoprice. I've been using it for almost 2 years with no problem at all, YMMV tho.
I'd recommend this one. Looks identical to the charger that comes with my 3GS. Works well, I use it every day at work for more than 6 months now. Again, YMMV.
http://www.dealextreme.com/details.dx/sku.26446#open full view
sonnyg95 said:
Anyone has experience with this wall charger from monoprice? (can't link, please look up Product ID: 6767)
It's rated at 1000mA. The stock charger that came with the vibrant is 700(I think). Will extra 300mA damage my phone?
Click to expand...
Click to collapse
the max charge rate for a Li-ion battery is 1C. So you could charge at up to 1500mA.
I ordered that exact charger a few days ago.
sonnyg95 said:
Anyone has experience with this wall charger from monoprice? (can't link, please look up Product ID: 6767)
It's rated at 1000mA. The stock charger that came with the vibrant is 700(I think). Will extra 300mA damage my phone?
Click to expand...
Click to collapse
The amperage rating only tells you the *maximum* possible output. The device (your phone) controls the current draw. As long as the voltage matches (5v), you can use a charger with any amperage rating which is 700mA (0.7A) or higher.
(Note that this only applies to chargers that your phone plugs into. You have to be more careful with the self-contained spare-battery chargers (where you remove the battery from the phone and put it into the charger). But those are normally battery-specific anyway.)
Also, you *might* risk damaging the battery through long-term usage of a charger that can't supply at least the minimum amperage (such as the sfsilicon's 500mA transformer). The end of a charge cycle draws the most power which is probably why sfsilicon couldn't fully charge his battery.
MV10 said:
.......
. The end of a charge cycle draws the most power which is probably why sfsilicon couldn't fully charge his battery.
Click to expand...
Click to collapse
that might explain why my laptop wouldn't always charge to 100% - first few times it did, and i'd find the notification msg when i'd close the laptop, but last few times it didn't
learn something every day
as i use the vibrant tethered every nite while browsing (which is when it was charging), any problem with finishing the charge with the samsung wall charger? ie interrupting the charge when i take it off the laptop?

my note geniune charger cannot charge tge anker 2700mah batteries

hi firstly i bought this chargrr r
ebay.com.sg/itm/260922341954?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
its a geniune charger for the batteries of the note and it works on my original battery and 2 batteries i bought made in china with no brand for the note.
next i buy the 2700mah anker batts with the unicersal charger.
amazon.com/Batteries-SGH-I717-International-Anker-Multi-purpose/dp/B007JSSNHI/ref=cm_cr_pr_product_top/191-7690781-5534019
the problem is the geniune charger cannot charge the anker batteries even though when i place them inside the charger it lights up to show its charging but after 5 hours of charging when i put the anker battery inside my note it shows 60% which means it didn't charge. the universal charger charges the anker batts fine since it came with them.
my geniune charger works cos it charges up the original battery. pls help.8
I have two Samsung vehicle chargers, both have failed, one the micro-usb does not work with my note, but is fine with the portable batter charger.
The other simply does not receive any current from the vehicle, even after a careful cleaning and spray with contact cleaner.
Never had these issues with any other vehicle charger.
Mine isn't the vehicle charger it's the geniune charger from samsung.
Do i need to list out the stats?
your samsung oem charger is designed to only charge the samsung battery.
But, there is a mod to the charger that you can do to fix this. Its a very simple solder.
I trying to find where I read this then I will post the link
here is the link and it will explain
or not (first post)
ok google this
diy galaxy note charger
it will be the one that says. "How to fast charge your galaxy note"
an xda dev figured this out
to digitbar thanks for explaining just curious though i was able to charge my no name brand batts on my samsung charger
digitbar said:
here is the link and it will explain
or not (first post)
ok google this
diy galaxy note charger
it will be the one that says. "How to fast charge your galaxy note"
an xda dev figured this out
Click to expand...
Click to collapse
Actually this isn't what i was looking for.
If you read my original post again i'm talking about the genuine charger not being able to charge 3rd party anker batteries. What you're showing here is using a 3rd party charger on my phone which isn't what i'm looking for.
I want the charger aka battery charger to be able to charge anker batteries. It has nothing to do with the phone itself. My phone charges the batts fine.

Best wall charger

Hi everyone,
I have a problem with my original wall charger that came with the phone. There seems to be something wrong between the cable and the connector you are plugging into the phone. I need to have the cable in a specific position for the phone to be able to recharge.
The question is, is there any better charger than the original samsung one? I could probably get it replaced as it still is in warranty, but I don't like how slow it recharges the phone. If I am running a 3D game the phone is slowly DISCHARGING even when plugged in to a wall charger.
I noticed the charger has only 500-700 mA output. I had an older htc charger which had 1000 mA output. Would a charger like this recharge my phone faster? I have seen some posts about non-samsung chargers not being able to recharge the battery fast as there is some kind of protection built into the phone.
I would also consider buying a wireless charger if it was available for a reasonable price.
Are you all using the stock chargers?
Thanks in advance for any help.
you can read this thread: http://forum.xda-developers.com/showthread.php?t=1721677&highlight=charging
Just to make sure it is the charger's fault, does the phone charge normally if connected to a computer, from the USB port?
Thanks for the link.
Yes, phone charges and transfers data from USB without any problem, so it should be fault on the charger.
Reading through that thread, I guess there is no point in buying a more powerful charger.
as i said there, i use a nokia 1200mAh charger and the charging time is more than 2 hours, so we have to deal with it. The thing you should care of is the quality of the charger to avoid the touchscreen known problems
Imho you don`t need better (more powerfull) charger because of the hardware limitations. What you should do is to try any other microUSB charger just to see if that solves your problem. So if any of your friends of family have other samsung or nokia etc. phone, thats charging with microUSB, plug it into your phone to see if it solves your problem. You will know what to do next if it does
al3x_xct said:
as i said there, i use a nokia 1200mAh charger and the charging time is more than 2 hours, so we have to deal with it. The thing you should care of is the quality of the charger to avoid the touchscreen known problems
Click to expand...
Click to collapse
how do I check the quality of the charger?

Quick and Inexpensive USB wall charger?

I just lost my USB wall charger and realized my spares don't charge as fast as my previous one...
My previous charger had my phone at +700ma while in sleep, two of my spares can do 400 and one can only do 200!
One time I used a car charger that had me at +900ma in sleep so I would like to try and find a new wall charger that can get me +900.
BTW all the chargers I have used have said they are 5v 1000ma, so clearly I can't just go by the specs they list- I need a first hand experience of a quality charger.
So I open it to the forums. Anyone here have experience of a particularly strong USB wall charger?
I got a good Motorola one on Amazon for pretty cheap and it's been going strong for a while.
Sent from my GT-N7100 using xda app-developers app
Well, you do need one that's 1000mAh.
You just need one from a reliable manufacturer that's not mis-labelled crap.
I'd just look for a quality brand. I got lucky with one for $1.50 on eBay but the seller isn't selling them any more.
Hm so I guess OEM or genuine name brands should reliably be up to their specs, then? Well, I guess I'm going to shop around for one that maybe says 1500ma or more because I believe my phone can take more than a 1A charger can give it, and it probably won't disappoint
Samsung note II have a battery of 3,100mAh, the charger is 2000mA(2A). but my i can use the same charger for my S2. so i guess that the amphere doesn't really matter. just that the higher the amphere of the charger, the faster it charge. But you sure need a higher amphere charger for bigger battery. Hope this help.
seacreature said:
Samsung note II have a battery of 3,100mAh, the charger is 2000mA(2A). but my i can use the same charger for my S2. so i guess that the amphere doesn't really matter. just that the higher the amphere of the charger, the faster it charge. But you sure need a higher amphere charger for bigger battery. Hope this help.
Click to expand...
Click to collapse
I've read that smartphones (at least android phones) have controlled charging circuits that will only allow for as much amperage as they are set to allow. So if you connect a 2000mA charger to the phone but it's limited to 1000mA then it will only draw 1000mA. However as I have noticed just because a charger says it can output 1000mA doesn't mean that it can. I have tried 4 different 1000mA chargers each with pretty different outputs- and if they don't output as much as your phone will take it WILL charge slower. The point of this thread was to gather information on which chargers are reliably fast and ideally economical ones (there's enough OEM chargers I can find for 10x the price of off-brand ones that would hopefully do the job right).

buying new sgn charger

Recently, my sgn n7000 charger(1yr old) got damaged.
I am looking to buy new charger of same model, but after searching a lot, i coudnt find a new genuine charger online, most of them are boxed and loosely packed.
i got some gud deal for a charger but its 700ma, it will take a lot of time to charge..
While searching, i got at these product
http://www.ebay.in/itm/Buy-Online-S...?pt=IN_Mobile_Accessories&hash=item3384a4ebb8
but on the samsung website, the note n7000 is not in the compatible list.
i wanna know, will it charge my note properly or not. Will i t damage my battery..!
or else pls give some link whr i can get genuine charger.
charger
The charger looks like an indian version of the one my daughter received with her galaxy s4. White is the colour of her phone and the colour of her charger, it also was 5v at 2A. To my knowledge the charging of the battery within the phone is controlled by the phone and as long as it is supplied with its minimum requirement of 5v. it will charge at whatever current it can within the control of the power management in the phone.
Hope this helps ? I did look at the samsung website in india and they had power units for sale. I dont know where you are ?
Samsung India has 700ma chargers listed..
And do u charge ur note with that one..? Us thr any problem.?
charger
No mine is a 5v 1A samsung charger. I also have an incar charger which is a standard usb charger for any make of phone and that supplies 5v at 1A. I also have a Yiboyaun unit from china which charges just the battery, I have 3 additional batteries I use and charge with this unit from china. I have had this setup for more than a year with no problems.
You can charge N700x with the Note 2 charger (which puts out max 2A). It charges slightly faster than the original Sammy 1A charger/cable. It's perfectly safe because the phone will not take in more current than it's configured.
seowphm said:
It charges slightly faster than the original Sammy 1A charger/cable. It's perfectly safe because the phone will not take in more current than it's configured.
Click to expand...
Click to collapse
If it charges faster than 1A its not limiting the input. The note 1 battery is made for 1A chargers. Using 2A will limit the life span of the battery.

Categories

Resources