Develop Bugs

Unofficial TWRP 2.8.7.1

What is better than the standard CM Recovery:
You can flash another firmware (not the CM)
Normal backup data
You can easily flash the Root
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Unlock the bootloader as on CM Wiki instructions
Puth the phone in bootloader mode
In the folder with fastboot put crackling-t0x1.img
Enter the following command:
Code:
fastboot -i 0x2970 erase recovery
then Enter
Code:
fastboot -i 0x2970 flash recovery crackling-t0x1.img
Disconnect the device from the USB and remove the battery. Then replace the battery and restart the device in recovery mode to verify the installation. To do this, hold down the "Volume Down" and "Power".
You can download crackling-t0x1.img from here
http://www91.zippyshare.com/v/60lfsDiR/file.html
Credits to 4PDA Members and especially to FindYanot for developing and allowing posting here
IT is NOT my Work

I've been using this for a while, working very good!
Great to make backups and test ROMs.

There is a problem - this recovery can not mount f2fs partitions

RaidonChrome said:
There is a problem - this recovery can not mount f2fs partitions
Click to expand...
Click to collapse
for my information : which system firmware can mount f2fs partitions?

Dior DNA said:
for my information : which system firmware can mount f2fs partitions?
Click to expand...
Click to collapse
Latest Cyanogen Mod 13 has Linux 3.10, so it should be able to mount f2fs just fine

RaidonChrome said:
Latest Cyanogen Mod 13 has Linux 3.10, so it should be able to mount f2fs just fine
Click to expand...
Click to collapse
thanks, then perhaps latest CM recovery will mount f2fs just fine as well.

Dior DNA said:
thanks, then perhaps latest CM recovery will mount f2fs just fine as well.
Click to expand...
Click to collapse
It does not, in fact it is broken even with ext4 currently

PLEASE HELP, something when wrong
RaidonChrome said:
It does not, in fact it is broken even with ext4 currently
Click to expand...
Click to collapse
Is this the reason why i can't install gapp on my wileyfoxswift and an error appear("e: unable to find partition size for '/recovery") every time i use the wipe.
i upgraded from 12.1 to
13.0-20160127-NIGHTLY-crackling and use the same for recovery but did not work so i installed TWRP and this error occurs -see pics
PLEASE HELP

AromaGapp not working in TWRP
TWRP not working in Aroma Gapp need fix (Aroma is best for me since i can customize install & will not replace CM stock files/app)
In the previous post, i was able to install twrp but i found out on many trial and error that open gapp aroma/full doesn't work both on cm12.1 and cm13.0 using TWRP. Also cm13.0 recovery will not work with open gapp aroma/full.
What works: (haven't tried all version)
On TWRP - i was able to use arm64-pico-6.0 on cm13.0 20160130
On CM Recovery - arm64-aroma-5.1 on cm12.1 20160107
This is based on my experience with the HELP of the awesome people in the forum. I just want to let you know and maybe it will be useful to other noobs like me

noob2016 said:
TWRP not working in Aroma Gapp need fix (Aroma is best for me since i can customize install & will not replace CM stock files/app)
In the previous post, i was able to install twrp but i found out on many trial and error that open gapp aroma/full doesn't work both on cm12.1 and cm13.0 using TWRP. Also cm13.0 recovery will not work with open gapp aroma/full.
What works: (haven't tried all version)
On TWRP - i was able to use arm64-pico-6.0 on cm13.0 20160130
On CM Recovery - arm64-aroma-5.1 on cm12.1 20160107
This is based on my experience with the HELP of the awesome people in the forum. I just want to let you know and maybe it will be useful to other noobs like me
Click to expand...
Click to collapse
Aroma compatibility with TWRP is listed on the Open G-Apps website.
Unfortunately this is the only TWRP we have available to us.

Tamarinde said:
Aroma compatibility with TWRP is listed on the Open G-Apps website.
Unfortunately this is the only TWRP we have available to us.
Click to expand...
Click to collapse
No it is not there is this one https://s.basketbuild.com/devs/beroid/Wileyfox%20Swift%20-%20Crackling/TWRPand yes it works with aroma

Thanks
robin0800 said:
No it is not there is this one https://s.basketbuild.com/devs/beroid/Wileyfox%20Swift%20-%20Crackling/TWRPand yes it works with aroma
Click to expand...
Click to collapse
That is great! i hope i can try i try it but sadly i send it back since the phone was just here for the upgrade. Anyway thanks for the reply here and on my other post.
Much appreciated

robin0800 said:
No it is not there is this one https://s.basketbuild.com/devs/beroid/Wileyfox%20Swift%20-%20Crackling/TWRPand yes it works with aroma
Click to expand...
Click to collapse
Confirmed!!! It works... i used TWRP 3.0. Works on both aroma and pico. Thanks so much!!!!

There is a zip file and recovery. IMG file, any reason why?

image45 said:
There is a zip file and recovery. IMG file, any reason why?
Click to expand...
Click to collapse
The .img file can be flashed by fastboot.
The zip file by any non stock recovery
and yes I do know the image file is contained in the zip but some people may not

robin0800 said:
The .img file can be flashed by fastboot.
The zip file by any non stock recovery
and yes I do know the image file is contained in the zip but some people may not
Click to expand...
Click to collapse
Yes i downloaded the zip file, extracted the recovery.img then flashed by fastboot. I am used to using fastboot commands
So the zip file would function as an update file via a non stock recovery, however once installed would replace the non stock recovery with twrp version!

[ROM] ► [8.0.0] ► [UNOFFICIAL] ► Nitrogen OS ► [cheeseburger]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Android OS version: 8.0.0_r17
For devices: cheeseburger
Source code: https://github.com/nitrogen-project | https://github.com/nitrogen-os-devices
Developers: xyyx, poad42
Thanks: ezio84, mydongistiny, Mazda--, beanstown106 and etc.
Google Apps: http://opengapps.org
Recovery: TWRP
The rich functionality is based on AOSP, development was begun in November, 2015.
xyyx (Max) - main developer
Copy the ROM and Gapps in SD card.
- Make a full backup including all data in your internal storage
- Flash in fastboot this TWRP
- Flash latest full firmware Zip
- In recovery format data (this will wipe your internal storage MAKE A BACKUP)
- Reboot into recovery
- Wipe System, Data, Cache and Dalvik cache
- Flash latest ROM
- Flash Gapps
- Flash the no_verity_op5.zip from here
- Flash Magisk or SuperSU (optional)
- Reboot and profit!
Enjoy
https://sourceforge.net/projects/poad42/files/cheeseburger
Translated to EN, RU
Nitrogen Project | Nitrogen Devices
Known Bugs:
Alert slider
Portrait mode
Off screen gestures
XDA:DevDB Information
Nitrogen OS, ROM for the OnePlus 5
Contributors
poad42
Source Code: https://github.com/LineageOS/android_kernel_oneplus_msm8998
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Testing
Created 2017-10-07
Last Updated 2017-10-07

This ROM is encrypted by default. However it can be disabled by flashing this zip https://drive.google.com/file/d/0B86MMdsJ-sNgenZuaHViX1pkSzQ/view?usp=sharing
Its recommended that you use this twrp : https://androidfilehost.com/?fid=817550096634801490 as the official twrp in my experience has /data mounting issues.
For root use magisk: https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589
Credits
-GZOSP(Base ROM)
-amartinz
-xyyx
-darkobas

Screenshots.

Very nice rom

Is everything working on this rom?

prajnay said:
Is everything working on this rom?
Click to expand...
Click to collapse
yup everything works. Just use the correct twrp and you should be fine.

poad42 said:
yup everything works. Just use the correct twrp and you should be fine.
Click to expand...
Click to collapse
Will try later today and report.

Looking forward testing this tomorrow! Looks like you might have the first stable Oreo build flashable in twrp!-:highfive:

poad42 said:
yup everything works. Just use the correct twrp and you should be fine.
Click to expand...
Click to collapse
What is the correct twrp? Can I use no verity zip for oneplus 5 to boot this rom on a decrypted device? How is everything working but the op says there are many bugs?

se7ensde said:
What is the correct twrp? Can I use no verity zip for oneplus 5 to boot this rom on a decrypted device? How is everything working but the op says there are many bugs?
Click to expand...
Click to collapse
The twrp linked in the second post.

Omg!! I can't believe that famous and best rom of Rn3 is available for my op5 too.. ???

Del. (the post was removed right before my eyes lol)

Unfortunately camera continue to close! What a pity!

Macchinista said:
Unfortunately camera continue to close! What a pity!
Click to expand...
Click to collapse
Did u try patched google camera?
What gapps do yall recommend?

buski said:
Did u try patched google camera?
What gapps do yall recommend?
Click to expand...
Click to collapse
Open GApps has released official 8.0 GApps

Macchinista said:
Unfortunately camera continue to close! What a pity!
Click to expand...
Click to collapse
Works fine here...
https://imgur.com/a/v8kgF
Issue seems to be with one plus camera, will fix it in next build.

buski said:
Did u try patched google camera?
What gapps do yall recommend?
Click to expand...
Click to collapse
No, i can't try because in recovery linked in OP it didn't appear pin input so the directories are encrypted and i can't install nothing!
After coming back to twrp "classic" i have the message "could not mount /data and unable to find crypt footing"

Macchinista said:
No, i can't try because in recovery linked in OP it didn't appear pin input so the directories are encrypted and i can't install nothing!
After coming back to twrp "classic" i have the message "could not mount /data and unable to find crypt footing"
Click to expand...
Click to collapse
Don't need to flash anything for that, it's an apk install lel.

Is volte working. I can receive calls but cannot make

poad42 said:
Don't need to flash anything for that, it's an apk install lel.
Click to expand...
Click to collapse
I'll try it! But can i ask if i have to install something with twrp multirom linked by you if there is a way to have access to sd cards contents? I try to re-add and remove pin in settings>security but, opposite of "classic" twrp it didn't appear the pin digit message necessary to read phone contents

[RECOVERY] TWRP 3.3.1-0 (lilac) [UPDATE: 2019-09-16]

TWRP
This project provides the TWRP recovery for for the Sony Xperia XZ1 Compact (lilac).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FEATURES
File-Based Encryption (FBE) support
EXT4 support
F2FS support
EXFAT support
Provides unzip
Additional languages
This recovery will use the security patch level from the system partition to decrypt data. It should not be tied to a security patch level anymore.
DOWNLOAD
Make sure you download the .img and corresponding .asc.txt file (see INTEGRITY)!
You can always find the latest version of the recovery HERE.
INTEGRETY
The recovery images also come with an GPG armor file (.asc). With that file you verify that the image I created hasn't been altered.
How do you do that?
Download my gpg keyring here: https://cryptomilk.org/gpgkey-8DFF53E18F2ABC8D8F3C92237EE0FC4DCC014E3D.gpg.
Download the recovery.img and recovery.img.asc.txt file
Rename the recovery.img.asc.txt file to recovery.img.asc
Verfiy the signature using the following command:
Code:
gpg --keyring ./gpgkey-8DFF53E18F2ABC8D8F3C92237EE0FC4DCC014E3D.gpg --verify recovery.img.asc
A good tutorial is: How to verify signatures for packages from the Tor Project.
SECURITY ADVICE
Don't flash ROMs or Magisk modules which set SELinux to permissive or you welcome malware on your device!​
XDA:DevDB Information
recovery_twrp_sony_lilac, Tool/Utility for the Sony Xperia XZ1 Compact
Contributors
modpunk, Dees_Troy
Source Code: https://github.com/cryptomilk/android_device_sony_lilac
Version Information
Status: Stable
Current Stable Version: 3.3.1-0
Stable Release Date: 2019-09-16
Created 2017-11-18
Last Updated 2019-09-16

Nice work!

What does the STOCK addition in the title mean?
Can't I flash for example LOS with it?

Nice work! So does that mean that we finally can root our xz1 compact?
And currently this TWRP is not working for security patch November, right? I mean build nr: 47.1.A.5.51

4rz0 said:
What does the STOCK addition in the title mean?
Can't I flash for example LOS with it?
Click to expand...
Click to collapse
RTFM!

aikon96 said:
Nice work! So does that mean that we finally can root our xz1 compact?
And currently this TWRP is not working for security patch November, right? I mean build nr: 47.1.A.5.51
Click to expand...
Click to collapse
No, I need to create one for November. Will do that soon.

modpunk said:
RTFM!
Click to expand...
Click to collapse
I did read the OT, if that's what you mean, but it doesn't answer my question.
If the LOS I want to flash comes with the same security patch level, would it work?

4rz0 said:
I did read the OT, if that's what you mean, but it doesn't answer my question.
If the LOS I want to flash comes with the same security patch level, would it work?
Click to expand...
Click to collapse
There is no limitation in flashing. However there is no LOS you can flash yet ...

works perferct! thank you :good:

I got an XZ1. Any chance to get TWRP for it (for testing)?

Could someone please test https://xor.cryptomilk.org/android/twrp-lilac/twrp-3.1.1-0-lilac-patchlevel-2017-11-05.img

TWRP
modpunk said:
Could someone please test
Click to expand...
Click to collapse
ok. I'll test it

modpunk said:
Could someone please test https://xor.cryptomilk.org/android/twrp-lilac/twrp-3.1.1-0-lilac-patchlevel-2017-11-05.img
Click to expand...
Click to collapse
I will indeed test too juhuuu...

it flashes okay via fastboot, and twrp is also working. except for format option under wipe, when typing 'continue' it seems like it doesn't show the inputs, only the last letter 'e'
anyway after i flashed the twrp, i booted it up, and mounted everything except for otg. and then of course i flashed magisk.zip (latest v14) and it also succeeded
but then when i reboot from twrp, it stucks at sony logo, meaning default bootanimation doesn't kick in, and i patiently waited for like 10-15 min
so i assume it's not working. i even tried with a userdebug and regular user build 47.1.A.5.51
now i will try just to boot the twrp without flashing it and then flash magisk.zip while it's booted up via fastboot to see if it boots up normally

a) Do you have your partition encrypted and could you mount it, so it asked for a password?
b) TWRP writes a log file you can download adb pull /tmp/recovery.log
c) adb logcat is also working
Note that there is currently no upstream TWRP developement for Oreo ongoing. I just wrote several hacks to get it working.

modpunk said:
a) Do you have your partition encrypted and could you mount it, so it asked for a password?
b) TWRP writes a log file you can download adb pull /tmp/recovery.log
c) adb logcat is also working
Note that there is currently no upstream TWRP developement for Oreo ongoing. I just wrote several hacks to get it working.
Click to expand...
Click to collapse
A: it does not ask for password upon bootup so i guess it's not encrypted in that way
B attached here
C is there any specific logcat you want, like error or fatal level etc.

Question just to be clear: do we have to update twrp for evry new securitypatch?

To decrypt the /data partion on a stock ROM, yes you do.

Hi modpunk,
Ur a true star...****
I just want to ask a couple of question's.
Does the bootloader have to be unlocked in order to flash this....?
I have had a Z3 Compact and got it rooted with bootloader locked and also a Z5 Compact using munjen setup.
Install TWRP on it Flashed SuperSU using TWRP was best thing i did.
Do you have a step by step guide how to flash this. I would love to test it for you.
When you flash is it using munjen flashtool...?
Thanks Sham

UPDATE
TRWP is working actually, just figured out that it's magisk that get the phone not to boot, bith 14 and 14.5
and latest supersu both the xperia one and the regular one v.2.82 fails, give error "unzip fail, no proper recovery etc."
Now for fun i will load it up with userdebug firmware and see if i can make it manually root with the "angela" method

[ROM][UNOFFICIAL][BETA][10.0] NitrogenOS [Op5/5t][24-08-2020]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Android OS Version: 10.x
For devices: Oneplus5(cheeseburger),Oneplus 5t(dumpling)
Authors build: Poad42
Source code: [url]https://github.com/nitrogen-project[/URL]
Based on AOSP
poad42 (Adhitya) - main developer
Download the ROM, Magisk (Optional)
Reboot to recovery
Wipe Data, System,Vendor and cache
Flash ROM , Magisk (Optional,no_verity(for decryption,optional).
Reboot
Enjoy
[*] Gapps is included with the ROM
Rom:
Drive
cheeseburger: https://drive.google.com/file/d/1n-2y5jLn3SEJ6IBeCRW9HXUhOySFJiKo/view?usp=sharing
dumpling: https://drive.google.com/file/d/1AxU3gkDmIHrckr9eQCQyIfkT58SevFF_/view?usp=sharing
Github
cheeseburger: https://github.com/op5-q/manifest/r...0-UNOFFICIAL_poad42-cheeseburger-20200824.zip
dumpling: https://github.com/op5-q/manifest/r...OS-10-UNOFFICIAL_poad42-dumpling-20200824.zip
firmware
https://github.com/op5-q/manifest/releases/tag/2020-05-20
Magisk: https://github.com/topjohnwu/magisk_files/blob/canary/magisk-release.zip
poad42's Nitrogen OS
XDA:DevDB Information
Nitrogen OS, ROM for the OnePlus 5
Contributors
poad42
Source Code: github.com/op5-q
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Beta
Created 2019-10-02
Last Updated 2019-11-08

Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
Fingerprint reader
NFC
Lights
Sound / vibration
Alert slider
Panel modes

Thanks to neobuddy for initial q bringup, Alex for DerpLab and Timo for testing my ****.
You can join our chat: https://t.me/op5nitrogen
Feel like buying me some coffee for my efforts?
Donation link: https://paypal.me/generichandle

1st

Now, this is what I will call a ROM Coming. Have been waiting for NOS to come up. Will try it out in a day or 2 at max.
2nd to post..
Have posted about it on my OP5 channel mate..
Pleas tell me you do not have google apps integrated, please.. The file size is 1+GB..

Wow!!!

I am getting ctsprofile false in magisk manager. I installed magiskhide profile module, still its false... Any suggestions how to fix it

vdbhb59 said:
Now, this is what I will call a ROM Coming. Have been waiting for NOS to come up. Will try it out in a day or 2 at max.
2nd to post..
Have posted about it on my OP5 channel mate..
Pleas tell me you do not have google apps integrated, please.. The file size is 1+GB..
Click to expand...
Click to collapse
It's common sense if a ROM is above 1gb then it definitely have gapps

Added to the OnePlus 5 Index Thread here.

Anyone tried on op5 decrypted?

user154 said:
Yes l have and it works fine
Click to expand...
Click to collapse
Rom ,magisk 19.5 and no_verity ?
Twrp?

i installed this ROM via TWRP, after cleaning everything system/cache/delvik/ e.t.c. but after the installation when i reboot the phone, it tried to load and then rebooted back into recovery automatically. did i do something wrong? my apologies I am new to trying these things.

fizex00 said:
i installed this ROM via TWRP, after cleaning everything system/cache/delvik/ e.t.c. but after the installation when i reboot the phone, it tried to load and then rebooted back into recovery automatically. did i do something wrong? my apologies I am new to trying these things.
Click to expand...
Click to collapse
Are you decrypted? Try flashing the no_veryty at the end

morfances said:
Are you decrypted? Try flashing the no_veryty at the end
Click to expand...
Click to collapse
thank you very much, it worked for that part, but now i a stuck in boot at Google G logo with slider moving under it, i waited for 5 minutes for it to load but did not went pass through that. do i need to do something else?

fizex00 said:
thank you very much, it worked for that part, but now i a stuck in boot at Google G logo with slider moving under it, i waited for 5 minutes for it to load but did not went pass through that. do i need to do something else?
Click to expand...
Click to collapse
Have you flashed magisk?

morfances said:
Are you decrypted? Try flashing the no_veryty at the end
Click to expand...
Click to collapse
morfances said:
Have you flashed magisk?
Click to expand...
Click to collapse
yes i had magisk previously, but now uninstalled via zip file through recovery. and did not install after installing the ROM. should i install that?
EDIT: i installed Magisk-v19.3 but still in the same situation, stuck at G logo and a slider under that.

user154 said:
Did you wipe vendor aswell?
and flash in this order:
1: ROM
2: Gapps
3: No verity zip (use this one as I had a couple that I tried with crdroid that didnt work) https://androidfilehost.com/?fid=5862345805528062047
4: Magisk
Im decrypted and this is exactly the procedure that I followed and i had no problems
Click to expand...
Click to collapse
i have tried exactly the same steps, now the screen went black after the reboot. nothing to display after oneplus logo screen. just a persistent blue notification light.
edit: yes i did wipe vendor as well.

user154 said:
What firmware and TWRP are you using?
im on latest codework TWRP and 9.0.8 firmware
Click to expand...
Click to collapse
TWRP 3.3.1
firmware 9.0.8

user154 said:
Did you wipe vendor aswell?
and flash in this order:
1: ROM
2: Gapps
3: No verity zip (use this one as I had a couple that I tried with crdroid that didnt work) https://androidfilehost.com/?fid=5862345805528062047
4: Magisk
Im decrypted and this is exactly the procedure that I followed and i had no problems
Click to expand...
Click to collapse
No need flash gapps, rom included gapps.
1. Wipe system, vendor, cache, data
2. Flash room
3. Flash no verity v4
4. Boot system
5. Flash magisk 19.5

Changelog (Oct 5th, 2019):
-Volte now works along with LTE
-Kernel upstream(weeb)
-Lockscreen weather
-Pixel live wallpapers
-Fix cts(safetynet) without messing with build fingerprint
-Clean up init scripts
-Fix in call audio
-Merge upsteam Changes from Nitrogen-OS
Note: To get audio to work during video recording disable "Ok Google" hotword detection
cheeseburger:https://drive.google.com/file/d/1pK8Hky8R_-k4_Fb22pQfGJjGx0jaFXhw/view?usp=sharing
dumpling: https://drive.google.com/file/d/174o3mE-Rf4Tp6yKJewyQ5BclS2dKwdob/view?usp=sharing

[ROM][11][TREBLE][UNOFFICIAL] crDroid v7.8 for the Nokia 8

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Working features:
It boots
WiFi
Bluetooth
Navigation keys
Fingerprint
Camera
Headphones
Ringtones
Bluetooth audio
Selinux enforcing
NFC
4K video
Hotspot
Known issues:
You tell me
Flashing Instructions
Pre-installation
T-Virus (Download here)
TWRP (Download from here)
NikGapps (Download from here)
First time installation
Backup your device data to a PC or OTG flash drive.
Flash T-Virus with NOST and reboot to recovery.
Download and copy crDroid and TWRP zip to the Internal Storage and flash them in that order.
Format userdata and reboot to recovery to swich to the updated slot.
Flash NikGapps and wipe the Dalvik Cache (or else the system will not boot).
Reboot to system and enjoy.
Installing from previous release
Backup your data to PC, OTG flash drive.
Reboot to recovery, copy crDroid and TWRP zip to the Internal Storage and flash them in that order.
Reboot to recovery to swich to the updated slot and flash Gapps.
Reboot to system
Troubleshooting
When flashing the ROM in TWRP, it fails at Step 2
To fix this, flash any TWRP >= v2.4 which contains a fix for slot switching
After flashing TWRP v2.x the folders have weird names and I cannot copy stuff to the internal storage
You forgot the format userdata before rebooting.
The GSI in T-Virus is A10 and uses software encryption. My TWRP builds use hardware based decryption blobs which
are incompatible with software encrypted userdata. My ROM uses hardware encryption so that is not a problem.
But when you do not format data and install TWRP v2.x then it cannot decrypt the userdata created by A10 GSI.
So always format data before installing TWRP v2.x releases
Sources
ROM: https://github.com/GPUCode/OTA/releases/
Device tree: https://github.com/GPUCode/android_device_nokia_nb1
Common tree: https://github.com/GPUCode/android_device_nokia_msm8998-common
Vendor tree: https://github.com/GPUCode/proprietery_vendor_nokia
Kernel: https://github.com/GPUCode/android_kernel_nokia_msm8998
Visit official website @ crDroid.net
crDroid Community Telegram
Contributors
THMSP, OneWayGamer, oaid
Source Code: https://github.com/crdroidandroid
ROM OS Version: Android 11
ROM Kernel: Linux 4.x
Based On: LineageOS
Version Information
Status: Stable
Created 2020-11-26
Last Updated 2021-05-31

Some screenshots

That was fast...
T-virus of yourself (2020) I believe... Correct me if I'm wrong.

You can use any T-Virus you like. My own though contains an updated TWRP version which supports ROM flashing. If you use any older one, it is necessary to flash my new TWRP releases before you atempt to flash the ROM.

Problem I Faced
Youtube won't start
Play store glitch
Apps like careem,uber won't show map

sdbadshah said:
Problem I Faced
Youtube won't start
Play store glitch
Apps like careem,uber won't show map
Click to expand...
Click to collapse
These issues are being investigated, possible fix has been found, wait the update by dev.

Magisk
After Installing Magisk My Device Stuck on Boot

sdbadshah said:
After Installing Magisk My Device Stuck on Boot
Click to expand...
Click to collapse
Same magisk caused bootloop.
Installed per instructions, wifi and sim do not work as well. Nokia 8 TA-1012

sdbadshah said:
After Installing Magisk My Device Stuck on Boot
Click to expand...
Click to collapse
Just tested on my phone, and Magisk works fine without causing any bootloops. What version are you flashing? You need to use version v21.0 and higher which supports Android 11
redhotdarkdevil said:
Same magisk caused bootloop.
Installed per instructions, wifi and sim do not work as well. Nokia 8 TA-1012
Click to expand...
Click to collapse
It is most probably a hardware problem with your device. All of my testers never reported Wi-Fi/SIM issues except Dual SIM. Does Wi-Fi work for you on stock ROM or in any other ROM?

Can u share the link of magisk u r using?

sdbadshah said:
Can u share the link of magisk u r using?
Click to expand...
Click to collapse
I recommend downloading the most recent version from the official releases: https://github.com/topjohnwu/Magisk/releases

New release is up! Download from here: https://github.com/GPUCode/android_device_nokia_nb1/releases/tag/v7-2
* VoLTE really works now
* Built in userdebug mode so the system should feel more responsive
* Fixed the in-call echo bug
* Play Store works now

emufan4568 said:
New release is up! Download from here: https://github.com/GPUCode/android_device_nokia_nb1/releases/tag/v7-2
* VoLTE really works now
* Built in userdebug mode so the system should feel more responsive
* Fixed the in-call echo bug
* Play Store works now
Click to expand...
Click to collapse
How To Updat just Flash It Through TWRP Or Have To INstall From Beginning?

sdbadshah said:
How To Updat just Flash It Through TWRP Or Have To INstall From Beginning?
Click to expand...
Click to collapse
Flash new TWRP so you can update without having to repeat the whole process.

Arashone said:
Flash new TWRP so you can update without having to repeat the whole process.
Click to expand...
Click to collapse
Ok So Just Flash The New TWRP Then Flash Os RIght?

sdbadshah said:
Ok So Just Flash The New TWRP Then Flash Os RIght?
Click to expand...
Click to collapse
That should be it. It would be nice if we hear a report back from you.

Do these instructions/ROM work on TA-1052?

Married To Christ said:
Do these instructions/ROM work on TA-1052?
Click to expand...
Click to collapse
Nokia 8 hardware is unique. It's Google that differentiate them. So, yes.

Excellent work, but the play store does not install apps larger than 500MB (if it "downloads", but does not install), I tried reinstalling nikgapps, clearing cache and google app data and nothing.

TlalocC said:
Excellent work, but the play store does not install apps larger than 500MB (if it "downloads", but does not install), I tried reinstalling nikgapps, clearing cache and google app data and nothing.
Click to expand...
Click to collapse
The issue has been fixed with a patch, wait for new build or if yoou need to install a patch it's available on tg

I have Installed Pubg after servel time its obb got delleted when i try to reinstall it does not install