Develop Bugs

[ABANDONED][ROM][BUILD 1 - 2016/01/06] CyanogenMod 12.1 - Bule Repack

Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Introduction
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
NOTE: This is a cooked ROM based on Compiled from Source by Bule.
Click to expand...
Click to collapse
-----------------------------------------------------------------------------------------------------------------​
This project no longer updated because I sold this device. Thanks for following my projects :good:​
-----------------------------------------------------------------------------------------------------------------​Issues?
Experience issues? Please provide the following info:
If the device was hard reboot, please provide the file "/proc/last_kmsg".
If the device was soft reboot or is "bootlooping", please run a logcat and provide the full output.
Please use Pastebin when possible.
Click to expand...
Click to collapse
Features
It's a standard CyanogenMod 12.1 Bule build 20160102 porting plus this:
Deleted China app
Default system theme
Added Xperia keybord (deleted china keyboard)
Europe timezone
Fixed host for normal contacts synchronization
en local
Root explorer in data/app (can delete from home app)
.
Click to expand...
Click to collapse
Installation instructions
Download the ROM into internal/external SD.
Download GoogleApps into internal/external SD.
Create a backup with TWRP if need.
Factory Reset via TWRP.
Flash it via TWRP.
Flash GoogleApps via TWRP.
If you receive the error in the TWRP "mount: failed to mount /dev/block/platform/mtk-msdc.0/..." flash the rom again.
Wipe dalvik-cache and cache via TWRP.
Reboot and waiting to complete the ROM installation.
Click to expand...
Click to collapse
Update instructions
Download the ROM into internal/external SD.
Download GoogleApps into internal/external SD.
Create a backup with TWRP for security.
Flash it via TWRP.
Flash GoogleApps via TWRP.
If you receive the error in the TWRP "mount: failed to mount /dev/block/platform/mtk-msdc.0/..." flash the rom again.
Wipe dalvik-cache and cache via TWRP.
Reboot and waiting to complete the ROM update.
Click to expand...
Click to collapse
Xposed installation
For Xposed installation follow this thread and install the arm64-sdk22 version.
Click to expand...
Click to collapse
Know bugs
Notifications LED: working fine with some colors, red | green | cyano | pink | orange | white but the cm color selection go crazy sometimes, we working to fix this, but the notifications now working fine.
Engineering mode not working (in this moment into no one CM working).
FM Radio module not working.
Sim 2 not working (need testing).
Click to expand...
Click to collapse
Change log
Code:
Build 1 - 2016/01/06
[new] First release.
Click to expand...
Click to collapse
Downloads
External Download (sorry but I can't upload every build): The author abandoned for a moment for instability issue, when this rom come back again, I repost here too.
Click to expand...
Click to collapse
Important notes
This ROM is based on Bule Version with plus features get from other CyanogenMod available for our device. The most important in this ROM is stability with velocity. If you wanna try this ROM remember this is a testing ROM and all times we working for give the best experience with this ROM and device. If you have a problem you can write here or into the official site (I suggest to talking here because into XDA we have the best developers in the android ecosystem).
Click to expand...
Click to collapse
XDA:DevDB Information
[ABANDONED][ROM][BUILD 1 - 2016/01/06] CyanogenMod 12.1 - Bule Repack, ROM for the Redmi Note 2
Contributors
Namaless, vova_vafin, bule
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Abandoned
Created 2016-01-06
Last Updated 2016-02-01

Reserved

You should tell us...WHY THIS ROM, WHY THIS THREAT?
There is the Daniel101 mod already which seems to have all this here PLUS other cool stuff.
Even if one doesn´t need the extra stuff....just ignore it. So no need for this ROM/THREAT here.
Otherwise please tell us what makes this here so special?

DJ-Tumor said:
You should tell us...WHY THIS ROM, WHY THIS THREAT?
There is the Daniel101 mod already which seems to have all this here PLUS other cool stuff.
Even if one doesn´t need the extra stuff....just ignore it. So no need for this ROM/THREAT here.
Otherwise please tell us what makes this here so special?
Click to expand...
Click to collapse
First for all thanks to post your idea with rude method.
Next you know some ppl can use some roms?
Third you can ignore the rom/thread and use what you want, example I used Miui stable but I testing all roms when come out for funny and for help other ppl.
What you think resolve with your post? Nothing...
Sorry if you think I'm rude, but I reply with the same method you post here...

The owner of the rom have removed from public access, I talking with him if want repost or I request deleting to this thread. Sorry for inconvenience.

[ROM][A5000 | cheeseburger][8.1.X][OFFICIAL] LineageOS 15.1 (Oreo) for Oneplus 5

LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
3rd PARTY ADDONS/MODS
While we have no issues with people using supersu/magisk/xposed/custom kernels/etc, we can't provide support for users who have them installed.
This thread is not the right place to discuss about mods/addons.
HOW TO INSTALL LINEAGEOS
- Make sure your phone was running OxygenOS 5.1 at least once and is currently on latest firmware
- Remove custom encryption pins/passwords else decryption will fail!
- Download the LineageOS zip(s). (see Downloads)
- Copy the LineageOS zip to internal sdcard.
- Unlock bootloader and install TWRP.
- Boot into TWRP.
- Perform a backup of your current ROM. (Optional)
- RECOMMENDED: Do a factory reset! No support if you didn't!
- Flash LineageOS.
- Optional: Install the Google Apps addon package. (see Downloads)
- Reboot
HOW TO UPDATE LINEAGEOS (15.1 -> 15.1)
- Download the LineageOS zip(s). (see Downloads)
- Copy the LineageOS zip to internal sdcard.
- Flash LineageOS.
- Reboot
DOWNLOADS
Lineage 15.1: https://download.lineageos.org/cheeseburger (Unofficial: https://sourceforge.net/projects/cheeseburgerdumplings/files/15.1/cheeseburger/)
Vendor images: https://sourceforge.net/projects/cheeseburgerdumplings/files/15.1/cheeseburger/vendor/
Firmware: https://sourceforge.net/projects/cheeseburgerdumplings/files/15.1/cheeseburger/firmware/
Migration-Tools: https://androidfilehost.com/?w=files&flid=254680 (Unofficial->Official, Official->Unofficial)
SU-Addon: https://androidfilehost.com/?w=files&flid=259254
Google Apps: https://androidfilehost.com/?fid=962187416754462508 | http://opengapps.org/
TWRP: XDA | twrp.me
DEVELOPER RESOURCES
https://github.com/LineageOS/android_device_oneplus_cheeseburger
https://github.com/LineageOS/android_device_oneplus_msm8998-common
https://github.com/LineageOS/android_kernel_oneplus_msm8998
HOW TO CONTRIBUTE?
Send your patches up for review: https://review.lineageos.org/

Good job!
But you link to Official Open Gapps. Open Gapps don't have 8.1 as of now. I think it would be better to link to another 8.1 working Gapps while waiting for Open Gapps to be updated to 8.1. Just to avoid confusion.
Keep up the good work you doing! And thanks for bringing that early Lineage 15.1 build to OP5.

Seems to work as good as stable
No issues so far #Mr_complicated

Yousvel said:
Good job!
But you link to Official Open Gapps. Open Gapps don't have 8.1 as of now. I think it would be better to link to another 8.1 working Gapps while waiting for Open Gapps to be updated to 8.1. Just to avoid confusion.
Keep up the good work you doing! And thanks for bringing that early Lineage 15.1 build to OP5.
Click to expand...
Click to collapse
Afaik there's no 100% working package yet.
Sent from my OnePlus5T using XDA Labs

For encrypted or decrypted devices?

codeworkx said:
Afaik there's no 100% working package yet.
Sent from my OnePlus5T using XDA Labs
Click to expand...
Click to collapse
This one works perfectly fine. More than 6000 downloads already. And I personally used it. It's working great. Zero issue.
https://androidfilehost.com/?fid=745849072291693774

Ground Zero gapps are working fine too

Does Magisk work for anyone here?

Blackbird1997 said:
For encrypted or decrypted devices?
Click to expand...
Click to collapse
doesn't matter since you have to format data.

codeworkx said:
doesn't matter since you have to format data.
Click to expand...
Click to collapse
A lot of people are already on Oreo so it does matter.

I now have laos15.1 on it. Come from the encrypted Omni 8.1. ?
Following Gapps used: https://builds.nezorfla.me/opengapps/20171229/

Blackbird1997 said:
I now have laos15.1 on it. Come from the encrypted Omni 8.1. ?
Click to expand...
Click to collapse
And you did not formatted your data so why thanked OP's answers?

Is dash charge implemented cuz my phone seems to be charging a little slower
Otherwise the rom is great, no bugs so far

@mcduffie2010 I have wiped data, system and cache in twrp

Blackbird1997 said:
@mcduffie2010 I have wiped data, system and cache in twrp
Click to expand...
Click to collapse
Wiping and formatting are two different things.

I have WIPED.

Blackbird1997 said:
I have WIPED.
Click to expand...
Click to collapse
So don't thank OP when he is giving false info.
If you're already on Oreo you don't have to format data again.

What is your problem?

And they already complain
DEVELOPER thanks for sharing your rom!

mcduffie2010 said:
So don't thank OP when he is giving false info.
If you're already on Oreo you don't have to format data again.
Click to expand...
Click to collapse
We recommend to do.
Try going from OOS 5 to 15.1.
Sent from my OnePlus5T using XDA Labs

[ROM][8.1.0][OFFICIAL] LineageOS 15.1 for Wileyfox Swift

[ROM][8.1.0][OFFICIAL] LineageOS 15.1 for Wileyfox Swift
Code:
[COLOR="Purple"]#include <std_disclaimer.h>[/COLOR]
[COLOR="Navy"]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/COLOR]
Installation:
If you are on stock OS, you need a custom recovery first. You can get the recommended TWRP recovery in the official installation instructions link below.
If you are coming from stock or other ROMs, you need to make a factory reset.
As always, make sure to backup before installing this ROM.
More detailed instructions at:
Install LineageOS on crackling
Official Download link:
LineageOS Downloads
Recommended Google Apps package:
Open GApps (choose the variant you want)
Changelog:
Changes for crackling
Bug reports:
How to submit a bug report
LineageOS JIRA
Donate to support development:
Donate via PayPal to jrior001
Donate via PayPal to LineageOS
XDA:DevDB Information
LineageOS, ROM for the Wileyfox Swift
Contributors
jrior001, mikeioannina
Source Code: https://github.com/LineageOS
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
Version Information
Status: Beta
Created 2018-05-20
Last Updated 2018-09-23

Reserved
Updated recovery required
http://theflamingskull.com/downloads/crackling/TWRP-crackling-3.2.1.img
Test Build #1
* permissive selinux for debugging purposes
Build #2 5/22/18
* media crash resolved
Build #3 5/30/18
* camera lag resolved, UI lag resolved

Your Rom won't install your updater-script is wrong for crackling.
I changed it to make it install.
It installs and boots but the sound is broken and keeps crashing.

robin0800 said:
Your Rom won't install your updater-script is wrong for crackling.
I changed it to make it install.
It installs and boots but the sound is broken and keeps crashing.
Click to expand...
Click to collapse
Define wrong? What did you have to remove from updater-script?
Also logs please? I only have Storm(kipper) to test with.
Sent from my PH-1 using Tapatalk

errors in ROM
jrior001 said:
Define wrong? What did you have to remove from updater-script?
Also logs please? I only have Storm(kipper) to test with.
Sent from my PH-1 using Tapatalk
Click to expand...
Click to collapse
/platform/soc.0/7824900.sdhci/ is not correct for crackling it is /bootdevice/
But I have no idea what is making the audio crash

robin0800 said:
/platform/soc.0/7824900.sdhci/ is not correct for crackling it is /bootdevice/
But I have no idea what is making the audio crash
Click to expand...
Click to collapse
That /dev/block/platform/soc.0/7824900.sdhci/by-name/ path is actually the correct path. Any path with "bootdevice" is just a symlink to /soc.0/7824900.sdhci. Aosp is trying to move away from using the bootdevice because the paths differ between the platforms(qcom/mtk/intel/kirin). We went ahead and made the jump to using full paths a lot of the lineage devices.
TDLR you need a new recovery that supports both.
http://theflamingskull.com/downloads/crackling/TWRP-crackling-3.2.1.img
Media issue is also resolved in the 5/22 build.
Sent from my PH-1 using Tapatalk

Rom now works
Yes your new recovery works and yes the media bug is sorted so many thanks.

Gapps
When I flash the rom with Gapps it makes a bootloop, any help?

msteroreo said:
When I flash the rom with Gapps it makes a bootloop, any help?
Click to expand...
Click to collapse
What gapps?
What's your install procedure? Should be some thing like:
1 wipe data/factory reset
2 install lineage
3 install gapps
4 reboot & profit
Sent from my PH-1 using Tapatalk

jrior001 said:
What gapps?
What's your install procedure? Should be some thing like:
1 wipe data/factory reset
2 install lineage
3 install gapps
4 reboot & profit
Sent from my PH-1 using Tapatalk
Click to expand...
Click to collapse
Thats what i do but it bootloops me

New build is up today, Lag in camera and flashlight startup is resolved as well as a good amount of UI lag.

Hi @jrior001
Do you still plan to this rom? I has a lot of potential. As I can see this is one of most active rom (based on the rom uploaded in the website).
Thank you...

is it stable ROM or not?!

like427 said:
is it stable ROM or not?!
Click to expand...
Click to collapse
Use this
https://forum.xda-developers.com/wileyfox-swift/development/rom-wileyfox-swift-t3807833

@jrior001
The site is service unavailable, is there new build uploaded?

vhick said:
@jrior001
The site is service unavailable, is there new build uploaded?
Click to expand...
Click to collapse
its back up now

How i can install on 7.1.2 ver of android? It possible?

@jrior001
Build 2018.08.16 start issue, bootloop!
Regards, Floyd

I never know it have a new build. They start to build new builds. Kudos!
Gonna try it now.

I heard the same from the small tester group I go to. I've sent them a build with extra logging, as soon as I know what's going on I'll get a new build up.
Sent from my PH-1 using Tapatalk

(End Of Life) ROM UNOFFICIAL LineageOS 14.1 for Galaxy S7 Flat (herolte)

// Disclaimer
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
// Info
It's unnoficial LineageOS14.1 for Galaxy S7 Flat (herolte)
I strongly recommend to perform a backup of your current rom before installation.
LineageOS 14.1 has been closed https://www.lineageoslog.com/build/scheduler
I will continue to give support
Currently LineageOS 14.1 for Galaxy S7 is receiving only minor changes (mostly security fixes).
Regarding going from unofficial builds to official - or official to unofficial builds that can be done by as described here:
https://wiki.lineageos.org/signing_builds.html#test-keys-to-official-or-vice-versa
To migrate from unofficial build to official or official to unofficial:
1. download this script
2. ensure that file has LF (UNIX-style) line endings
3. put it on your phone
4. reboot into recovery
5. make a full backup!
6. go to the folder where script is located
7. run: ./migrate.sh official
8. WARNING! rebooting phone now would end in data corruption!
9. flash the official build now (after flashing official build it is safe to reboot)
10. flash Gapps (and any addons)
11. reboot
What’s working
Audio
Bootanimation
Brightness
Bluetooth
Camera
Microphone
Fingerprint reader
NFC
Wi-Fi
LED
RIL (calls, sms, microphone, data)
All sensors
GPS
SD Card
- make a full Backup from your device
- Full wipe device (system, data, cache, dalvik)
- Install your Build
- Install Gapps
- Wipe Cache and Art/Dalvik
- Reboot
- Wait for 1st boot
- Enjoy
Update can be downloaded to your mobile phone via lineageos-updates and
if it is not possible to install the update automatically.
(Select in twrp) install/select Storage/internal storage/superordinate folder/data/lineageos_updates.
// OTA
https://www.los-legacy.de/14.1/herolte
update: Monthly
Download gapps ama64
https://opengapps.org/
Telegram for herolte and hero2lte
// Donate Us
PayPal.Me
// Source Code
https://github.com/LineageOS
https://github.com/Exodusnick
// Partners & Friends for German
https://www.los-legacy.de/partners/for German
https://android-freaks.de/forum/thread/46-rom-unofficial-samsung-s7-herolte-hero2lte-lineageos-14-1/
XDA:DevDB Information
ROM UNOFFICIAL LineageOS 14.1 for Galaxy S7 Flat (herolte), ROM for the Samsung Galaxy S7
Contributors
Exodusnick
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 4.x
Based On: LineageOS
Version Information
Status: Nightly
Created 2018-05-31
Last Updated 2020-11-06

Reserved

Reserved

Why in ota link you have and lien 15.1
---------- Post added at 05:32 PM ---------- Previous post was at 05:32 PM ----------
But nice work

deleted

please do not build install from ota server..... all build of s7 are out of date and not to use even those of oreo
from 31.05.2018 can be installed

So we don't have to install from Ota link only from that one from Google drive?

no Google drive is latest update
ota is online see lineageos_updates from your mobile
when you come from build 25.05.2018

Ok so If Im coming from another rom, I can just install straight the latest one from 31.05 that is in Ota?

Brugos27 said:
Ok so If Im coming from another rom, I can just install straight the latest one from 31.05 that is in Ota?
Click to expand...
Click to collapse
you have the first build from 25.05.2018 on it then you can update
if you come from lineageos officially then see op

Telegram??

Exodusnick said:
you have the first build from 25.05.2018 on it then you can update
if you come from lineageos officially then see op
Click to expand...
Click to collapse
OK I asked cuz I have now a Rom based on tw so I wanted to know if I don't need to install first the one from 25.05 but ok...

Sorry for so Manny questions but in quick titles the flash have delay

miniboygr said:
Telegram??
Click to expand...
Click to collapse
later probably

Would be nice to see this for the S7 Edge too. Anyway, thank you very much for taking the lead

mauam said:
Would be nice to see this for the S7 Edge too. Anyway, thank you very much for taking the lead
Click to expand...
Click to collapse
comes when ota server is set up for hero2lte

deleted

2 more questions please, is gps and substratum working ok?

gps yes substrate not tested

Exodusnick said:
you have the first build from 25.05.2018 on it then you can update
if you come from lineageos officially then see op
Click to expand...
Click to collapse
I come from the last official rom that i have installed with official LOS app... Now what have i do? Can i install simply your unofficial rom from TWRP? Thanks a lot

[10.0][STABLE] AOSiP Quiche beta

Android Open Source illusion Project
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
"AOSiP stands for Android Open Source illusion Project. We are an AOSP based custom ROM, twisted with the latest features from all over the Android development community. Quality and stability is our first priority as we are dedicated to bringing you the best Android has to offer.
AOSiP brings you the most wanted features, while keeping speed and stability our top priority.
AOSiP features multiple customization options, so your phone can look the way you want it."
Known issues:
- AOSiP ten is not officially released yet. There are missing features!
- Display > lockscreen > advanced settings (this wont to do anything)
- Instagram video recording (You will sound like a robot)
- Wi-Fi display reboots the phone
- Green pictures when using the stock camera/ Whatsapp in lowlight (this is related to YUV processing). Use provided gcam instead.
- Report unknown bugs with logs please!
Instructions :
Clean flash:
- Flash latest Pie ROM by Xiaomi (10.0.13.0). You may use option to retain userdata.
- Use fastboot to boot to latest TWRP.
- Falsh the TWRP installer zip and Force-encryption-disabler zip
- Reboot to TWRP
- Flash the ROM zip
- Flash TWRP installer
- Got to Reboot --> Change boot slot (if on A: A --> B or if on B: B --> A)
- Reboot to recovery
- (Optional, but recommended) Flash GAPPS linked below (other GAPPS for Android 10 may work too)
- (Optional) Flash Magisk (>v20.1!!!!)
- Reboot and wait, will take longer than normal reboot!
Dirty flash (upgrade from existing AOSiP 9 install):
- Reboot to TWRP
- Factory reset in TWRP. No need to wipe userdata! (Skip if you are on ten already)
- Flash ROM zip
- Flash TWRP installer
- Got to Reboot --> Change boot slot (if on A: A --> B or if on B: B --> A)
- Reboot to recovery
- (Optional, but recommended) Flash GAPPS linked below (other GAPPS for Android 10 may work too)
- (Optional) Flash Magisk (>v20.1!!!!)
- Reboot and wait, will take longer than normal reboot!
Note: It is strongly advised to make a backup before upgrading!
Downloads :
Download from Sourceforge
Open GApps Note: OpenGAPPS for ten now officially out, so link changed. Nano package is still recommended!
Recommended Gcam
Kernel Source
Device Tree
Vendor Tree
Props to all the guys from daisy-development-q and especially Lyceris-chan!
Have fun!
XDA:DevDB Information
[10.0][STABLE] AOSiP Quiche beta, ROM for the Xiaomi Mi A2 Lite
Contributors
opal06
Lyceris-chan
Tunasahinn
acras01
pawelik001
Offain/33bca
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Created 2019-11-27
Last Updated 2019-11-27

Thank you! Respect mate
Edit:
PS. With gapps you reccomend. Can i use Bit... or Open.. ?

gumka77 said:
Thank you! Respect mate
Edit:
PS. With gapps you reccomend. Can i use Bit... or Open.. ?
Click to expand...
Click to collapse
I used the OpenGAPPS from test folder I linked in the OP. Bit... might work, but no guarantee. Just try them and report back, so maybe other users can learn from your experiences.
Note: Updated my main phone from AOSiP Pie to Ten and had some wierd issues. Factory resetted in TWRP and now everything working. So making a backup and factory reset before updating is recommended

When viperos q?

Thanks you , I see your sources is stable thanks for upgrade aosip
opal06 said:
Android Open Source illusion Project
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
"AOSiP stands for Android Open Source illusion Project. We are an AOSP based custom ROM, twisted with the latest features from all over the Android development community. Quality and stability is our first priority as we are dedicated to bringing you the best Android has to offer.
AOSiP brings you the most wanted features, while keeping speed and stability our top priority.
AOSiP features multiple customization options, so your phone can look the way you want it."
Known issues:
- AOSiP ten is not officially released yet. There are missing features!
- Device side should be fine, but please report all bugs here with logs!
Instructions :
Follow guide by davidrocher: https://github.com/tkchn/daisyinstall
This works for Android 10 too! Please use correct version of OpenGAPPS.
Note: It is strongly advised to make a backup before upgrading and performing a factory reset in TWRP.
Downloads :
Download from Sourceforge
Open GApps
Kernel Source
Device Tree
Props to all the guys from daisy-development-q and especially acras1!
Have fun!
XDA:DevDB Information
[10.0][STABLE] AOSiP Quiche beta, ROM for the Xiaomi Mi A2 Lite
Contributors
opal06
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Created 2019-11-27
Last Updated 2019-11-27
Click to expand...
Click to collapse

i can't believe wifi, call, bluetooth audio, cam, fingerprint, navigation, google, youtube, spotify, usb connection to pc works
Only two things i've discovered, there is no clock app (i installed Gapps pico maybe that the problem) and AOSiP Updater seems not working.
Can someone give me a clock/ alarm app - opensource ? (App of Tibor Kaputa doesn't work)

schmidt_here said:
i can't believe wifi, call, bluetooth audio, cam, fingerprint, navigation, google, youtube, spotify works
Only two things i've discovered, there is no clock app (i installed Gapps pico maybe that the problem) and AOSiP Updater seems not working.
Can someone give me a clock/ alarm app - opensource ? (App of Tibor Kaputa doesn't work)
Click to expand...
Click to collapse
See if this works for you:
View attachment Clock_v1.0.0.zip

Thanks for the rom, what base is needed?, is November security patch?

Txatxiquesi said:
Thanks for the rom, what base is needed?, is November security patch?
Click to expand...
Click to collapse
yes, november
i don't remember wich version it was, i think 10.0.9. Try 10.0.13 and then post if it works
ps: i installed omniclock from playstore - it works
Fingeprint swipe doesn't work

opal06, kudos for signature spoofing built-in, I can use microG.

Can i update kernel to Celexas kernel v.2. (from devotag) ?

Thank you all very much for your positive feedback.
schmidt_here said:
i can't believe wifi, call, bluetooth audio, cam, fingerprint, navigation, google, youtube, spotify, usb connection to pc works
Only two things i've discovered, there is no clock app (i installed Gapps pico maybe that the problem) and AOSiP Updater seems not working.
Can someone give me a clock/ alarm app - opensource ? (App of Tibor Kaputa doesn't work)
Click to expand...
Click to collapse
As for the missing clock, I did not notice it during testing, but you are obviously right. For a stock feeling you can download the Clock app by Google, but there are many other good alternatives.
AOSiP updater is not working because I did not update the OTA file. AOSiP ten is still beta from ROM source side, so I won't enable OTA until it's official from their side.
Txatxiquesi said:
Thanks for the rom, what base is needed?, is November security patch?
Click to expand...
Click to collapse
As base any pie base should work, but latest is best.
schmidt_here said:
yes, november
i don't remember wich version it was, i think 10.0.9. Try 10.0.13 and then post if it works
ps: i installed omniclock from playstore - it works
Fingeprint swipe doesn't work
Click to expand...
Click to collapse
Have you enabled fingerprint swipe in Settings --> System --> Gestures? For me it works fine
gumka77 said:
Can i update kernel to Celexas kernel v.2. (from devotag) ?
Click to expand...
Click to collapse
Probably, just try and report. If something goes wrong, go to TWRP and flash ROM again without wiping data. You won't loose any settings or data.

Plis build with nitrogen kernel

test
opal06 said:
Have you enabled fingerprint swipe in Settings --> System --> Gestures? For me it works fine
Click to expand...
Click to collapse
Yes, it's enabled. It doesn't disturb me, maybe i've to make a fresh install and take another version base.
Yesterday i had an issue, i couldn't download from play store until i deactivated and reactivated the app. Also i couldn't install apk's downloaded manualy from website.
Maybe it's a unique incident

schmidt_here said:
Also i couldn't install apk's downloaded manualy from website.
Click to expand...
Click to collapse
I had a similar issue trying to install apps with Amaze file manager. I had no problem installing apps with the built-in file manager and also with F file manager from f-droid, in my case it was obviously an incompatibility of Amaze with 10. I'm on 10.0.9 base btw. Also I was able to delete system apps with Amaze and magisk 19.3 but not with 20.1. And I can't uninstall Whatsapp no matter what, the installer just quits so I must do it with adb uninstall.

celrau said:
I had a similar issue trying to install apps with Amaze file manager. I had no problem installing apps with the built-in file manager and also with F file manager from f-droid, in my case it was obviously an incompatibility of Amaze with 10. I'm on 10.0.9 base btw. Also I was able to delete system apps with Amaze and magisk 19.3 but not with 20.1. And I can't uninstall Whatsapp no matter what, the installer just quits so I must do it with adb uninstall.
Click to expand...
Click to collapse
That's normal behavior for magisk 20.1 because the system mount point had been changed from /system to / so most root using apps don't know how to use it. Besides that you can use the system debloater magisk module and that should work just fine.

lacia-chan said:
That's normal behavior for magisk 20.1 because the system mount point had been changed from /system to / so most root using apps don't know how to use it. Besides that you can use the system debloater magisk module and that should work just fine.
Click to expand...
Click to collapse
I just did some reading on this, you are right

Flashing Nitrogen R2 kernel results in bootloop with this rom. R1 works fine. Any fix?

good job

I'm using your rom for 1-2 days now Looks like every features work really well to me. I'l report back later if I see anything. Thanks OP