Develop Bugs

[UPDATED][TUTORIAL][REDMI 1S]Dual-System Installation in detail!!

First of all i would like to thank ->Tsing Yi qingyi @http://weibo.com/1048297887 for his effort to make this possible!!
As some fellas request....I'm Just giving a detailed guide for the process to have Dual-System{Dual_Boot} in our little dragon @rmani :laugh:
DOWNLOADS:
1.HM1S-Sysrec.zip: http://pan.baidu.com/s/1jGzfP3o
2.M1S-System-Menu1.3-test.zip: http://pan.baidu.com/s/1qWDN5u8
if want it in a simpler way download 3
3.Mokke + Miui.zip: http://pan.baidu.com/s/1sjCyI3z
:good: @bhushan2k
MIRROR Link: https://drive.google.com/folderview...NrYmkzLTN3WmlONEczVnlzajg0emo3ZHM&usp=sharing
WARNING!! : Installation of Dual System is Complecated, include data loss and may brick your devices and i'm not responsible for any kind of Loss or Failure..!!
CAUTION!! : During this Process, Your Phone gets Factory Reset and all internal memory gets wiped!! Make a Backup of all internal data as well as a nandroid to extrnal sd!!
***//For Users coming from MIUI rom and want to have MIUI on one of the Systems continue from step 1-2 and read NOTE and in step 3 tick the checkbox promting special!
STEP1:
Flash HM 1S-Sysrec.zip...[after flashing, recovery gets rebooted].......In this Process Phones Intrernal Memory gets formatted and current ROM gets Factory Reset!
STEP2:
Flash HM 1S-System-Menu1.3-test.zip...Select English->Press Next->Accept and Press Next->Enter the function->Install and uninstall->Install the dual system.....This installs Dual-System and gets rebooted to recovery, meaning dual system got installed!!
**NOTE 1 : If you wish to install mokee+MIUI which was provided #3 in download section.....You can flash that mokee+MIUI.zip here, without proceeding further...and reboot!!
**NOTE 2 : Now we have two System partitions installed and we are on system1, which already have the previous Rom residual and System2 is Void!!
**NOTE 3 : If you want to have a fresh Installation of AOSP Rom on System1, you can directly flash a AOSP rom of your choice! or continue with previous rom!
STEP3:
Now that we have a Rom in System1 [MIUI or a AOSP]....so we need to install system switching software in it....
Flash HM 1S-System-Menu1.3-test.zip, Follow the prompts to enter the main menu -> enter the function -> Install switching software -> System I-> Next [check special for MIUI users]...and reboot system!!
STEP4:
After the completion of boot process you will see a system changing app....open the app ->give root permissions and the phone gets rebooted and gets stuck at mi logo indicating we are in System2....Now Enter Reovery (Powr+VolUp same time)
STEP5:
Flash a ROM of your choice...."and dont reboot!"....after flashing rom again flash HM 1S-System-Menu1.3-test.zip, Follow the prompts to enter the main menu -> enter the function -> Install switching software -> System 2-> Next....now reboot !!!.. which will take you to ROM installed in System 2 ....
STEP6:
After the completion of boot process, now that you are in System2, will see a system changing app as well ....open the app ->give root permissions and you will be able to switch to the other system/ROM........
////**Manual System switching process: **///
Flash HM 1S-System-Menu1.3-test.zip Follow the prompts to enter the main menu -> enter the function ->System Switching -> and select a System of your choice and proceed and Finally reboot !!!
***///Wanna change rom or try a new ROM keeping the other still///***
Stay on the System on which you want to try a new ROM....Reboot to recovery...
Flash HM 1S-System-Menu-Test1.3.zip and Follow the prompts to enter the main menu -> enter the function ->clear data->
Continuing which will wipes and factory Resets the current Rom....After proceeding further enter RECOVERY....
and Flash the ROM u wanna Try...and repeat #STEP5 and install switching software on new system!!(Hope U Understand)!!!
For reverting back...we need to flash Sysrec.zip once again and flash Sysmenu.zip and follow uninstall procedure...then everything will be normal...
...for further questions comment below...............Give :good: if useful!!!....
Happy Flashing!!!

If anything Goes wrong...How to revert Back ?
Sent From My Redmi

1.Does we need to follow a unbrick tutorial
To revert back OR just restore a backup
2.Should we install twrp and continue or
Continue with philz recovery
3. Can we access system partition of system 2 from system 1 and vise versa
Sent from my Redmi 1S using XDA Free mobile app

can we use rom??and can i install custom kernel for both roms??

as9333 said:
1.Does we need to follow a unbrick tutorial
To revert back OR just restore a backup
2.Should we install twrp and continue or
Continue with philz recovery
3. Can we access system partition of system 2 from system 1 and vise versa
Sent from my Redmi 1S using XDA Free mobile app
Click to expand...
Click to collapse
For reverting back...we need to flash Sysrec.zip once again and flash Sysmenu.zip and follow uninstall procedure...then everything will be normal...
2.cwm or twrp...u can try philz.. Dunno..
3.We can browse sys2 directories from sys1 & vice versa

how can i restore my data on my first rom? help me plz

chauhansonu104 said:
how can i restore my data on my first rom? help me plz
Click to expand...
Click to collapse
I don't think restoring nandroid data will work... Because....as u can see there are two two folders inside root/data/.......by restoring data from recovery will first wipes current root/data content and writes content from backup....so no dual-system!!! Hope you understand....tell me whether u have installed dual system? If so once see inside root/data /....u will get it!

sathyakaushik4 said:
can we use rom??and can i install custom kernel for both roms??
Click to expand...
Click to collapse
We can install gapps for system1 and system 2 separately....and can install custom kernels as well...!

very good tutorial.. thnx for this.. I tried on my own and couldnt manage.. will try again this time following ur simple steps..

Just a doubt if we install cm r18 and PAC ROM with custom kernel can we install kernel patch for both the ROMs
Will cm work
Can we boot into sys 2 within recovery
If sys 1 got bootloop
Sent from my Redmi 1S using XDA Free mobile app

Great, Thanks for info, will try after my exams, one again Thank You Very Much.

@as9333
i guess we can switch between system 1 & 2 from recovery itself.. just flash the zip and explore through its aroma installer and see theres that option to switch...

as9333 said:
Just a doubt if we install cm r18 and PAC ROM with custom kernel can we install kernel patch for both the ROMs
Will cm work
Can we boot into sys 2 within recovery
If sys 1 got bootloop
Sent from my Redmi 1S using XDA Free mobile app
Click to expand...
Click to collapse
Note 1: Two Roms will be installed with two separate system partitions....all u can do things like installing custom add-ons or patches either being on system1 or system 2..use switching software to switch between system partition 1or 2...
Note 2: U can switch to system of ur choice from recovery...by flashing HM1s-system-menu.zip...there u will c an option to switch system...hope u understand if u had read the procedure with a bit of pathence!

Thanx alot bro! now im running miui 6 and carbon rc6..
a small doubt.. in the dual boot system menu there are 2 options saying system change(install systemchange and direc system change or sumthing) whats the second one? what will it do?

had hard time downloading from chinese server... here is gdrive mirror link @pawanzZ

N-Gavin said:
Thanx alot bro! now im running miui 6 and carbon rc6..
a small doubt.. in the dual boot system menu there are 2 options saying system change(install systemchange and direc system change or sumthing) whats the second one? what will it do?
Click to expand...
Click to collapse
Read note2 of the above replied post...ur doubt will be clarified!!

bhushan2k said:
had hard time downloading from chinese server... here is gdrive mirror link @pawanzZ
Click to expand...
Click to collapse
Mk+miui is not mandatory to download!!!.... Remaining 2 are <30mb...any ways u made it easy ...tnx for mirror!!

internal storage
Thnx for the great tutorial
but i still have few question
First ,do external storage also wipe out?
Second ,are app installed in each rom are shared among them,includin data?

Hsmetric181 said:
Thnx for the great tutorial
but i still have few question
First ,do external storage also wipe out?
Second ,are app installed in each rom are shared among them,includin data?
Click to expand...
Click to collapse
figured it out myself,for everybody else
won't format external sd card
and apps will be installed separately

Maybe some mistakes in step 2. The dev recommended unmount system, data and cache before installed Dual-System (doesn't matter really). Some user may need install it twice to success for unknown factors. And as I know on earlier versions, after you installed Dual-System, both partitions are empty. You need to flash a rom to system 1. But I haven't try v1.3 yet so I don't know if anything changed.
The tutorial seems so long but it's very reasonable to proceed.
1. (unnecessary for the 1st time) recover your phone's status - flash sysrec.zip
2. install the dual-boot system - flash into aroma and choose the option
3. flash a rom to current (1st) system - flash it in recovery
4. (optional but recommended) install a switcher in the rom - install it in the aroma, caution the options, don't choose the wrong system
5. switch to system2 - switch directly in the aroma, or [ boot your phone to use the switcher app (after that plz press vol+ to enter recovery because system2 is empty now)]
6. flash another rom to current (2nd) system - just flash it in recovery, it will be in system2
7. (optional but recommended) install a switcher in the rom - install it in the aroma, caution the options, don't choose the wrong system
now you have dual system installed.
For changing between systems, use the switcher (if installed) or change in the aroma installer.
For replacing a rom, switch to the rom you unwanted, and reboot to recovery and flash the new one.
For clear data, don't use recovery,it will clear both. Use the aroma (change to the system you want to clear data and choose clear current).
For miui user, special for miui is actually for miui 6 because /system/app can't get root permission in miui 6.
For uninstall, do it in aroma and then flash sysrec.zip
@pawanzZ

[ROM]CynogenMod For Xolo Q1010i!

CynogenMod For Xolo Q1010i!
Guess What? The King Of All OS CYNOGEMOD Is Here For Our Os!​----------------------------------------------------------------------------------------------------
DISCLAIMER:YOUR WARRANTY IS NOW VOID!
I AM NOT RESPONSIBLE FOR DEAD SD CARDS!
---------------------------------------------------------------------------------------------------
Things Required To Flash:-
1. Rooted Device
2. Custom Recovery Flashed (Eg:CWM,TWRP,CTR)
3. Patience
4. A Working Brain
Steps To Follow While Flashing It:-​
NOTE:BACKUP EVERYTHING USING ANY BACKUP APPLICATION AND THEN ONLY PROCEED FURTHER AS IT WILL HELP YOU IF YOU WANT TO GO BACK TO YOUR STOCK ROM!
1. First Of All Reboot Your Phone Into Recovery Mode (Usually Done By Pressing Volume Up And Power Up Button )
2. Then Just Go To WIPE FACTORY DATA
3. Then After It Is Complete Go To WIPE CACHE PARTITION
4. Then Go To Advanced>WIPE DALVIK CACHE
5. THE FINAL STEP : Go To Main Menu>INSTALL ZIP FROM SD CARD>THEN LOCATE IT>INSTALL!!
6. Then Just Reboot Your Phone And Have Some Patience As First Boot Takes A Little More Time
7. After Boot EnJoY Your Custom ROM!! ​:fingers-crossed:
Features :-
1. CynogenMod Launcher
2. Apollo Music App Provided
3. Dsp Manager Provided
4. CynogenMod Boot Animation
5. Backup/Reset Function
6. Floatify Notifications! [ Please Make Sure To Enable Them As Well!]
7. Dual Sim Support
8. Stock Camera
9. OTG Usb Support
Bugs:-
Not Yet Present!
HOW TO ROOT ROM:-
After Flashing Rom Boot Up Your Device Once And Then Again Reboot In Recovery Mode And Flash SuperSu.zip!
And Your Phone Is Rooted!
NOTE:- THE ROM IS JELLY BEAN [ANDROID 4.2.2 BASED] BECAUSE IN KITKAT THERE WERE SEVERAL BUGS!
CREDITS:-
CynogenMod Team For Apps,Boot Screen
Team Xolo For Stock Rom
And I Have Done All Other Parts Of Making!
Hope You Like My Work And Do Hit Thanks If You Do !
Stay Tunned For More Posts,Roms!
Downloads:-
Link To Rom :- https://docs.google.com/uc?export=download&confirm=kWx6&id=0B9sCtQAUS6TEanBOSkg3TzEwT2s
Link To SuperSu.zip :- http://download.chainfire.eu/451/SuperSU/UPDATE-SuperSU-v2.01.zip?retrieve_file=1
Link To Custom Recovry : CWM : http://forum.xda-developers.com/q101...overy-t2811159
TWRP: http://forum.xda-developers.com/show....php?t=2746379
:laugh::silly::victory:

screenshots?
Some more screenshot please?

vinayakjain1998 said:
Some more screenshot please?
Click to expand...
Click to collapse
Like What Type Of Screen Shots>?

@Techy said:
Like What Type Of Screen Shots>?
Click to expand...
Click to collapse
Status bar.
Features.
settings.
etc etc.

I don't believe its cm..
proove it..what cm features u have in this rom...

[Recovery] [Unofficial] [MI 8] TWRP 3.3.1-1031

I'm not the Author, the author is wzsx150 from LR.TEAM
WZSX’s TWRP is well-known as the Chinese version of TWRP due to the language default is in Chinese. However, you can switch to English within TWRP user settings it's easily. switched. You can follow the instructions on this link to change the language to English: https://miui.blog/any-devices/lr-tea...inese-english/
Xiaomi 8's LR.Team customized version of Twrp
Automatically decrypts data, Includes root functionality, clear the power-on password, multi-function restart.
Disclaimer: I have installed it and for me it works fine. However, it is not guaranteed to work for you especially if you currently have encryption. Use at your own risk
If you need help flashing TWRP : Follow instructions here: https://miui.blog/mi-8/flash-twrp-root-mi-8/
Downloads
Latest
Version for Miui 11 Android 10/Q : https://www.androidfilehost.com/?fid...26312261636230
MD5: 2f5f2e7dc8f32b5a999828c9370b7de2
Version for Miui 10 or 11 Android 9/P : https://www.androidfilehost.com/?fid...26312261636232
MD5: 4681f9bd6367f934218da71fd528e39b
Old Versions
TWRP-3.2.3.1-FireDance-Edition (English) ( img)
TWRP 3.2.3-1208 (English) ( zip - img )
TWRP 3.2.3-1110 (English) ( zip - img )
TWRP 3.2.3-1110 ( zip - fastboot - img )
TWRP 3.2.3-0918 (zip - fastboot - img)
TWRP 3.2.3-0908 (zip - fastboot - img)
TWRP 3.2.2-0703 (zip - fastboot - img)
TWRP 3.2.2-0611 (zip - fastboot - img)
TWRP 3.2.2-0609 (zip - fastboot - img)
Changelog (Google Translated)
2018.11.10 update Contents:
1. Update the new rom that supports the official Android 9.
2. Update and optimize some functions
3. Increase the option to restart after the automatic upgrade is completed. In the twrp setting, the default is automatic restart. Uncheck the box and you can not restart. After the automatic upgrade, some operations are performed to prevent twrp from being overwritten, etc.
4. Update the built-in root to magisk 17.1, and fix the problem that the module cannot be brushed. Other features are also updated and optimized
5. After the new version of the system root, restarting the system requires manual installation of the magisk app, the official system problem, this can only be so
. 6. If Kami may need the root system or remove the dm check operation.
7. Prevent the functions covered by the official rec: root system, signature boot, remove dm check, cancel forced encryption, etc.
2018.9.8 update:
1. Support the official Android 9.0 system, including automatic decryption data
2. About data decryption, this may not be particularly stable now, sometimes need to reboot into the system and then restart Twrp can be decrypted.
If the new version of twrp is not supported, you can try to use the old version of
2018.8.6 update:
1. Update twrp 3.2.3 source code
2. Built-in magisk16.7, temporarily build this version first
3. Optimize data decryption problem, fix some problems
4 Support the new version of miui10 data decryption
5. Decrypt the plaintext display input password, easy to check whether the password input is correct
6. Update to try to repair the decryption data scheme, set the lock screen password to the machine, enter twrp need to enter the lock screen Password, otherwise you cannot temporarily decrypt data.
7. After brushing in twrp, the first time you enter twrp may restart once. This is normal. If you restart repeatedly, or you can't decrypt data, please give me feedback on Weibo.
8. Regarding data decryption, this may not be particularly stable now. Sometimes you need to reboot into the system and restart into twrp to decrypt.
If the new version of twrp is not supported, you can try to use the old version of

Thanks. I was already using the EN version you posted in the Dogsly(that may be wrong) thread.
Great job

arifqur said:
Thanks. I was already using the EN version you posted in the Dogsly(that may be wrong) thread.
Great job
Click to expand...
Click to collapse
@gulp79 is to thank for the English version

mikefallen said:
@gulp79 is to thank for the English version
Click to expand...
Click to collapse
if you want to add to op, this is the img version of TWRP-3.2.3-1110-XIAOMI8-EN-wzsx150
(with a minor modifications of prop.default, and also with chinese language, in previous version chinese was removed, btw english is set as default).
https://mega.nz/#!MwQn3IgR!UmuuBk1OScPrHi_HUO1zA_Da0df3nexfrrWGEBGjJPg

gulp79 said:
if you want to add to op, this is the img version of TWRP-3.2.3-1110-XIAOMI8-EN-wzsx150
(with a minor modifications of prop.default, and also with chinese language, in previous version chinese was removed, btw english is set as default).
https://mega.nz/fm/M4oDgLxA
Click to expand...
Click to collapse
that link doesn't seem to work for me, just redirects to the home page of mega

mikefallen said:
that link doesn't seem to work for me, just redirects to the home page of mega
Click to expand...
Click to collapse
try this
https://mega.nz/#!MwQn3IgR!UmuuBk1OScPrHi_HUO1zA_Da0df3nexfrrWGEBGjJPg

gulp79 said:
try this
https://mega.nz/#!MwQn3IgR!UmuuBk1OScPrHi_HUO1zA_Da0df3nexfrrWGEBGjJPg
Click to expand...
Click to collapse
yup added to OP Thanks!

Help!!!
It works for mi 8 miui 10.0.3.0 global?, i cant figure out how install the eu rom, in the twrp show me only folders encrypted :C, somebody knows how ?

Looks like you will have to format Dara partition in recovery by typing yes

So, boot the img and then flash the zip for TWRP to stick permanently?

Can't use gapps Aroma installer using twrp .. any ideas ?

could this twrp support amora installer
could this twrp support amora installer?

On my MI 8, i restored a previous backup made with twrp, now the device does not accept my 4-digit password so I can't login to my phone!
please help!

cyaneo said:
On my MI 8, i restored a previous backup made with twrp, now the device does not accept my 4-digit password so I can't login to my phone!
please help!
Click to expand...
Click to collapse
in twrp go to file manager, data, system and delete locksettings file. reboot and you're good to go again

Hi!
Help me, please!
I can't exit from recovery mode on MI8

cyaneo said:
On my MI 8, i restored a previous backup made with twrp, now the device does not accept my 4-digit password so I can't login to my phone!
please help!
Click to expand...
Click to collapse
Go into recovery mode, format internal memory.
---------- Post added at 06:24 AM ---------- Previous post was at 06:22 AM ----------
Coolesha said:
Hi!
Help me, please!
I can't exit from recovery mode on MI8
Click to expand...
Click to collapse
You need to format your device.

bahuy2003 said:
Go into recovery mode, format internal memory.
Click to expand...
Click to collapse
ok, but doesn't this delete all my settings & personal files (aka reset to default)?
Thank you!

cyaneo said:
ok, but doesn't this delete all my settings & personal files (aka reset to default)?
Thank you!
Click to expand...
Click to collapse
If you device can't reboot, you can flash eu or global rom, format again and reboot system.

bahuy2003 said:
If you device can't reboot, you can flash eu or global rom, format again and reboot system.
Click to expand...
Click to collapse
Hu? never wrote it doesn't reboot etc. - It reboots, everything seems to be OK - I "just" can't login after restore a backup....
so, again: does "format internal memory" reset my phone, delete setting or personal files? If so, how does this solve the problem? After a fresh EU ROM install, everything works fine like a new install does.

cyaneo said:
Hu? never wrote it doesn't reboot etc. - It reboots, everything seems to be OK - I "just" can't login after restore a backup....
so, again: does "format internal memory" reset my phone, delete setting or personal files? If so, how does this solve the problem? After a fresh EU ROM install, everything works fine like a new install does.
Click to expand...
Click to collapse
Flash this zip in TWRP and your login password would be deleted, which by the way gets jumbled up after a restore.

[Recovery][J710F/FN/GN/MN/K] [Build 3][3.2.3-0] TWRP for j7xelte (Galaxy J7 2016)

Team Win Recovery Project 3.2.3-0
This is for the Exynos SM-J710F, SM-J710FN, SM-J710GN, SM-J710MN, SM-J710K models only!
WARNING: Flashing a custom recovery to your device will trip the Knox warranty bit on your phone. Check with your mobile provider to see if they will still cover warranty on Knox bit triggered devices. If you understand this risk, continue on.
WHAT IS TWRP?
Oh come on, you know what it is - don't try to fool me!
In case you're serious, though...
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, and root your device.
DOWNLOAD
Build 3 3.2.3-0
Older builds:
Build 2 3.2.3-0
I highly recommend using Odin to flash when possible.
You can find a zip containing Odin as well as a link to Samsung's Mobile drivers page here:
https://odindownload.com/
FULL STEPS FOR ROOTING
In your ROM, go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
Now go to Settings -> Developer options. (above About device)
You need to enable OEM unlock, otherwise you might end up with boot problems or be unable to flash later on.
Make sure your don't have Factory Reset Protection enabled in your Google account or you may never be able to boot again!
More information: https://support.google.com/nexus/answer/6172890?hl=en
Extract Odin_(version).zip to your computer.
Install Samsung Mobile Phone Drivers for Odin to find your device.
Download a .tar image of TWRP for j7xelte.
Reboot your device into Download mode. To do this, select reboot from the power menu and hold the [Volume Down] + [Home] buttons while your device reboots.
Once you reach the Download mode warning screen, press [Volume Up] to continue.
Open Odin and place that TWRP tar file in the [AP] slot, under Options tab disable Auto Reboot, then press [Start].
Once the flash is complete (Odin should tell you in the log, and progress bar on phone should stop), you can pull the battery then place the battery back in. Now hold [Volume Up] + [Home] + [Power] buttons until you reach recovery mode.
If you end up in stock recovery, start again from download mode step.
At this point, you will reach the screen asking you if you want to allow system modifications.
You will want to swipe to allow, otherwise the OS will replace TWRP once you boot!
If you want to be rooted with Magisk:
Download the latest Magisk.
Without exiting TWRP, transfer the Magisk zip to your device over MTP* and flash it using [Install] in TWRP.
Go to [Reboot] -> [System].
* MTP, known as Media Transfer Protocol, is the same way you transfer files from your PC to your device when booted into system.
KNOWN ISSUES
You need to wipe Data when on stock ROM
Changelog
Build 1: Initial release
Build 2: Update to M10 kernel and android-8.1 source (from android-6.0)
Build 3: Fix MTP problems and /vendor (invalid argument) + upstreamed M10 kernel to 3.18.134 with google recommended changes to kernel
NOTE: If you're on stock Oreo rom always make sure your system is read only. Don't let it be r/w
SOURCE CODE:
TWRP (android-9.0)
Device tree (android-8.1)
Kernel: (pie)

why is not on the official web?
idk this seems pretty sketchy

M4T145 said:
why is not on the official web?
idk this seems pretty sketchy
Click to expand...
Click to collapse
I can't instantly get official i can upload pictures btw

Is it support Android 8.1.0 Firmware?

TRalperenTR said:
Is it support Android 8.1.0 Firmware?
Click to expand...
Click to collapse
Yes but make sure you leave system read only and flash magisk instantly to fix dm verify

Thanks man. It's worked! Every features is working. But why does it say E: on the console? I didn't understand.

TRalperenTR said:
Thanks man. It's worked! Every features is working. But why does it say E: on the console? I didn't understand.
Click to expand...
Click to collapse
I don't know. Its a twrp bug maybe. Also download it again i built it using the M10 kernel now but it also says /vendor invalid argument

...

It is working fine checked it

This TWRP doesn't install Oxygen Kernel. It says "Recovery Busybox Setup Failed."

I have already installed official twrp from website do i have to reinstall fresh on just download a zip for flash without installing magisk plus kindly upload a video for step by step process.
By the way a quick question is kernel 3.18.135 is latest or 3.18.14

Sulltan Mehmood said:
I have already installed official twrp from website do i have to reinstall fresh on just download a zip for flash without installing magisk plus kindly upload a video for step by step process.
By the way a quick question is kernel 3.18.135 is latest or 3.18.14
Click to expand...
Click to collapse
3.18.135 newer then 3.18.14
If you have other twrp extract the .tar archive and move .img to phone and goto Install on twrp select Install Image and Click on it. Select recovery and swipe to confirm. Done

Hi, the link of the latest build is down, can you re-upload please?

I saw in other tutorials that when in stock 8.1 rom you need to erase all data from internal memory. If i do this, there is no longer a, /system folder so there is no rom and bootloop happens.
Do i need to do factory wipe instead? I know i have to wipe data because Its encripted and twrp cant access internal memory.
Im asking what kind of "wipe data" i need to do

just format data to decrypt
link please

bro it says download file does not exist on google drive

download link ??

https://drive.google.com/open?id=1Xq4TAkcs9plY3zfGHiall21a3GgjdgHS
---------- Post added at 17:28 ---------- Previous post was at 17:28 ----------
saquib996 said:
bro it says download file does not exist on google drive
Click to expand...
Click to collapse
Ofogh said:
download link ??
Click to expand...
Click to collapse
https://drive.google.com/open?id=1Xq4TAkcs9plY3zfGHiall21a3GgjdgHS

[GUIDE] Flashing ROM EvolutionX 4.1 GSI [Android 10] [Stable]

GSI ROM: EvolutionX-4.1.69-20200329-GSI-ARM64-AB
Take it at Your Own Risk
INSTALLATION :
Enter TWRP Recovery
Select Wipe - Format Data - type "yes" and confirm
Select Reboot - Power off and Enter TWRP again
Copy GSI ROM and GAPPS to your phone
Install - Install Image - select EvolutionX-4.1.69-20200329-GSI-ARM64-AB.img - select System Image and Confirm to flash.
Select Reboot - Power off and Enter TWRP again
Select Wipe - Advanced Wipe - select "System" - Repair or Change File System - Resize File System - Confirm to Resize
Select Mount - select "System" & "Vendor"
Select Install - select open_gapps-arm64-10.0-nano-20200408.zip and Confirm Flash
Reboot - System
Setup the phone - Done!
DOWNLOAD:
GSI ROM EvolutionX-4.1.69-20200329-GSI-ARM64-AB.img.xz
Open GAPPS open_gapps-arm64-10.0-nano-20200408.zip
ISSUE:
MTP does not work
other by your self
Credits
Thanks to ExpressLukeGSI
Watch this video how to flash it:

redymedan said:
GSI ROM: EvolutionX-4.1.69-20200329-GSI-ARM64-AB
Take it at Your Own Risk
INSTALLATION :
Enter TWRP Recovery
Select Wipe - Format Data - type "yes" and confirm
Select Reboot - Power off and Enter TWRP again
Copy GSI ROM and GAPPS to your phone
Install - Install Image - select EvolutionX-4.1.69-20200329-GSI-ARM64-AB.img - select System Image and Confirm to flash.
Select Reboot - Power off and Enter TWRP again
Select Wipe - Advanced Wipe - select "System" - Repair or Change File System - Resize File System - Confirm to Resize
Select Mount - select "System" & "Vendor"
Select Install - select open_gapps-arm64-10.0-nano-20200408.zip and Confirm Flash
Reboot - System
Setup the phone - Done!
DOWNLOAD:
GSI ROM EvolutionX-4.1.69-20200329-GSI-ARM64-AB.img.xz
Open GAPPS open_gapps-arm64-10.0-nano-20200408.zip
ISSUE:
MTP does not work
other by your self
Credits
Thanks to ExpressLukeGSI
Watch this video how to flash it:
://youtu.be/tu4OFcbjlzI
Click to expand...
Click to collapse
Thanks but can you compile a updated version like 4.4 please? Thanks

SnowTalker said:
Thanks but can you compile a updated version like 4.4 please? Thanks
Click to expand...
Click to collapse
Watch this video for Evolution X 4.4 https://youtu.be/NyO1r60sbUA

redymedan said:
watch this video for evolution x 4.4 https://youtu.be/nyo1r60sbua
Click to expand...
Click to collapse
thank you thank you thank you thank youuuuuuuu :d :d

redymedan said:
Watch this video for Evolution X 4.4
Click to expand...
Click to collapse
It didn't work, it always gets stuck on the boot animation whilst running for over a hour. Also 4.5 is released with July patch so no rush but could you fix that and release 4.5? Thx

SnowTalker said:
It didn't work, it always gets stuck on the boot animation whilst running for over a hour. Also 4.5 is released with July patch so no rush but could you fix that and release 4.5? Thx
Click to expand...
Click to collapse
Just enter in download mode and reinstall TWRP with Odin and your system will enter normally

wrong title not stable volte hotspot screen mirroring not working

the touch-screen sensibility is too high :/ any humidity on screen make touch-screen crazy