I was flashing rom on my phone(downloaded from mi website) and somehow it got bricked, it was an error Mismatching image and device. The phone now wont turn on, can't boot into recovery or fastboot, no led when charging. When connected to PC attempting to flash(an older rom), now when I try and flash I will get errors including:
sahara read end error 20
cannot receive hello packet
cannot receive hello packet miflash is trying to reset
grab lkmsg log
Object reference not set to an instance of an object
Device manager detects device as Qualcomm HS-USB QDLoader 9008(COM20)
Tried looking around the forums but so far no progress
SOLVED:
Apparently I got the model of my phone wrong, it's actually a Redmi Note 4G, if you look at the mi website the two phones(Redmi Note and Redmi 1S) look identical. So all I did afterwards was install the CORRECT rom for the phone and flashed using MiFlash 2014.05.09.0. Make sure Device SIgnature Enforcement is disabled, the latest MiFlash couldn't detect the device but using a fallback version it was detected as something else and it somehow worked. During this, QD Loader 9008 also changed to 9006. Once it's done, just unplug then hold power button and pray everything worked out. GOOD LUCK BOIS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
savemepls66 said:
I was flashing rom on my phone(downloaded from mi website) and somehow it got bricked, it was an error Mismatching image and device. The phone now wont turn on, can't boot into recovery or fastboot, no led when charging. When connected to PC attempting to flash(an older rom), now when I try and flash I will get errors including:
sahara read end error 20
cannot receive hello packet
cannot receive hello packet miflash is trying to reset
grab lkmsg log
Object reference not set to an instance of an object
Device manager detects device as Qualcomm HS-USB QDLoader 9008(COM20)
Tried looking around the forums but so far no progress
SOLVED:
Apparently I got the model of my phone wrong, it's actually a Redmi Note 4G, if you look at the mi website the two
phones(Redmi Note and Redmi 1S) look identical. So all I did afterwards was install the CORRECT rom for the phone and flashed using MiFlash 2014.05.09.0. Make sure Device SIgnature Enforcement is disabled, the latest MiFlash couldn't detect the device but using a fallback version it was detected as something else and it somehow worked. During this, QD Loader 9008 also changed to 9006. Once it's done, just unplug then hold power button and pray everything worked out. GOOD LUCK BOIS
Click to expand...
Click to collapse
Thank you brothher...
I am OK this way. Sorry for poor English.
Related
Hi i was bought phone from ebay which was stuck in hboot, but when i was receive phone battery was completely flat.
And now i have problem i cant charge it, just red led blinking twice, i was think maybe charging port is damage, after replace charging port still same
Phone connected to computer is connecting and disconnecting every 5 sec this device Qualcomm HS-USB QDLoader 9008
What i can due with this phone ?? Is any chance for repair ?
Like i mention phone before battery run out was stuck in hboot, now is dead
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here was a quick and easy Google search I did given the information you provided. Many results to get you started. HTC One M8 Qualcomm HS USB QDLoader 9008
LightWeight_CO said:
Here was a quick and easy Google search I did given the information you provided. Many results to get you started. HTC One M8 Qualcomm HS USB QDLoader 9008
Click to expand...
Click to collapse
Is nothing about it for m8
You are looking for Qualcomm HS-USB QDLoader 9008. There are plenty of links that discuss, instruct and walk you step by step to resolve your issue. It is not an easy fix. But you need to research to see if you think you can do it yourself. Otherwise you should consider a buying a different device.
Google is your friend.
LightWeight_CO said:
You are looking for Qualcomm HS-USB QDLoader 9008. There are plenty of links that discuss, instruct and walk you step by step to resolve your issue. It is not an easy fix. But you need to research to see if you think you can do it yourself. Otherwise you should consider a buying a different device.
Google is your friend.
Click to expand...
Click to collapse
I was work with qfil but give me error all the time
Sahara Version:2
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
w QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
w QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download
Click to expand...
Click to collapse
Try formatting your sdcard to NTFS file system instead of exfat. If that does not work., your device may not be unbrickable. time to upgrade.
I had a Nexus 5X and a while ago it went to bootloop issue. Currently the device does not turn ON, but when it connects to PC it's showing in the device manager as Qualcomm HS-USB QDLoader 9008 device.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have done some search and found a guide to follow to fix this issue. Here the guide I followed https://forum.xda-developers.com/google-nexus-5/general/fix-unbrick-nexus-5-stucked-qualcomm-hs-t3043301.
But when I'm doing the steps, it stuck in the step that finding a device and give me this error saying no response from device.
Then I searched some another way around and found another tool call QFIL. In that case my device is detected to that tool as a device.
My problem is when using this tool there should be a file in .mbn format and some other files in .XML etc. that matches with Nexus 5X. I have search and couldn't find any of matching sources for that. I do not have any deeper knowledge in this case and if somebody can explain the current situation that cause this issues, it will be very helpful for me. And if any sources or another methods to try out also very helpful
+1 looking for the same help
sathindukavneth said:
I had a Nexus 5X and a while ago it went to bootloop issue. Currently the device does not turn ON, but when it connects to PC it's showing in the device manager as Qualcomm HS-USB QDLoader 9008 device.
I have done some search and found a guide to follow to fix this issue. Here the guide I followed https://forum.xda-developers.com/google-nexus-5/general/fix-unbrick-nexus-5-stucked-qualcomm-hs-t3043301.
But when I'm doing the steps, it stuck in the step that finding a device and give me this error saying no response from device.
Then I searched some another way around and found another tool call QFIL. In that case my device is detected to that tool as a device.
My problem is when using this tool there should be a file in .mbn format and some other files in .XML etc. that matches with Nexus 5X. I have search and couldn't find any of matching sources for that. I do not have any deeper knowledge in this case and if somebody can explain the current situation that cause this issues, it will be very helpful for me. And if any sources or another methods to try out also very helpful
Click to expand...
Click to collapse
Did you find a solution?
链接：https://pan.baidu.com/s/1TmQ9jmdAym2NYt_YGyt2Cg 引脚：g5cg
linzifu577 said:
链接：https://pan.baidu.com/s/1TmQ9jmdAym2NYt_YGyt2Cg 引脚：g5cg
Click to expand...
Click to collapse
Hello!
Could you upload here? https://roxorkiller.hu/index.php/s/yiEfEqZiDN4joDL
Tnanks
csihama said:
Hello!
Could you upload here? https://roxorkiller.hu/index.php/s/yiEfEqZiDN4joDL
Tnanks
Click to expand...
Click to collapse
i'm trying to download it, but it's all in chinese language, so i'm not sure if i'm doing it right on baidu desktop client
the name of the file is something like nexus5x_9008(BRICK SOLVE).rar according to google translator
Hi guys
I need help MY oneplus 5t IS HARDBRICK MODE, or EDL mode, Qdloader 9008.
I used MSM Download Tools but no flash, appeared only sahara communication hadbrake or sahara communication failed.
I need the .ops files, I saw in some way these extracted files could get the necessary files
https://github.com/bkerler/oppo_decrypt
I found this tool, but I do not know how they work
If anyone can help me
thanks
https://youtu.be/G_wOo83869o
Erro my oneplus 5t
edsmat said:
https://youtu.be/G_wOo83869o
Erro my oneplus 5t
Click to expand...
Click to collapse
Has anyone experienced this?
Can you help with something?
edsmat said:
Has anyone experienced this?
Can you help with something?
Click to expand...
Click to collapse
I noticed that after you click on "Start" the tool keep saying "Connected" / "N/A" and that during a few seconds it doesn't show up in device manager as well. Maybe your USB cable/port is defective?
Some_Random_Username said:
I noticed that after you click on "Start" the tool keep saying "Connected" / "N/A" and that during a few seconds it doesn't show up in device manager as well. Maybe your USB cable/port is defective?
Click to expand...
Click to collapse
Thank you for your reply.
It may be that, but strange that other people are the same problem.
and in version 3.0 test of 3t, it recognizes the device
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://github.com/bkerler/oppo_decrypt
I was thinking of extracting .ops file, using oppo decrypt, I just can not
edsmat said:
Thank you for your reply.
It may be that, but strange that other people are the same problem.
and in version 3.0 test of 3t, it recognizes the device
https://github.com/bkerler/oppo_decrypt
I was thinking of extracting .ops file, using oppo decrypt, I just can not
Click to expand...
Click to collapse
Odd, because it runs fine on my machine. Just curious is your cpu an AMD one? Asking as I saw on other threads persons having issues with the tool on machines with AMD CPUs while it ran fine on machines with Intel ones.
Some_Random_Username said:
Odd, because it runs fine on my machine. Just curious is your cpu an AMD one? Asking as I saw on other threads persons having issues with the tool on machines with AMD CPUs while it ran fine on machines with Intel ones.
Click to expand...
Click to collapse
my machine is intel, unbrick is working oneplus one, oneplus 3t, oneplus 6t my actual device, do you change usb flex.
You should see your device and click start to begin the process; if it gives you some error (like sahara or something else), unplug, power on, power off and the plug it again, now it should be fine.
And that's it, the tool will do all the work and, at the end, you will have like a brand new phone ready to a new setup.
SOURCE:https://forum.xda-developers.com/one...ional-t3798892
Could you solve it?
My 3 year old Moto G5 Plus running android 8 suddenly restarted two days ago and went into Start up failure. It no longer shows My product or IMEI number. It just shows potter 000000000000000 32GB P3B
Bootloader logs read " Start up failure. Your device didn't start up successfully. Use the Software Repair Assistant on computer to repair your device. Connect your device to your computer to get the Software Repair Assistant" written in red.
I have my IMEI and product numbers saved on my pc in a notepad file, but the LMSA software does not recognise my device to even try to rescue it. I want to retrieve files from my phone before attempting a factory reset.
On using the LMSA, it says "lmsa doesn't match appropriate firmware. you can try to select a firmware manually" but then it has no option to select anything manually. I have my phone previously registered on the software on my PC.
I have not rooted my phone, nor used anything other than stock android. My bootloader is locked. I cannot remember if I had Developer options selected or not, most probably not.
On trying to go to recovery mode it says the same message " Start up failure. Your device didn't start up successfully. Use the Software Repair Assistant on computer to repair your device. Connect your device to your computer to get the Software Repair Assistant"
When I connect the phone to the computer, it recognises it (I hear a notification sound) and under Devices it shows under Unrecognised as "Fastboot potter s"
I've never flashed my phone but would it be possible to recover the files in the internal storage of the phone by installing TWRP (in a non rooted, bootloader locked phone) without data loss?
How does it work?
Please help! I really need to recover my photos and notepad notes. Is there any way? Any software?
Please help! Please!
i have the same issue.
can someone help with that .
sharing screenshots of the same.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i have the same issue too. ( xt1683)
I'm not responsible for what you do to your device.
Have you seen this post? https://forum.xda-developers.com/t/...d-as-qhsusb_bulk.3636457/page-9#post-76035108. Also read post # 223 about trying this on a Windows 10 machine.
Good luck.
roundaway said:
I'm not responsible for what you do to your device.
Have you seen this post? https://forum.xda-developers.com/t/...d-as-qhsusb_bulk.3636457/page-9#post-76035108. Also read post # 223 about trying this on a Windows 10 machine.
Good luck.
Click to expand...
Click to collapse
I tried this method and didn't work for me. but the device loads bootloader (not on blanck mode)
is there any way to fix this
please help me
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
all of my partitions have been lost
IT SHOWS AVAILABLE PARTITIONS: /nothing/
-cant go to recovery mode
-cant go to fastboot mode
-cant go to mtk_gui mode
this happens when trying to get mtk_gui
-cant go to mtk_gui mode
this line just shock me since I have heard MTK cpu is never can be broken...
maybe we should try all manual setting we can attach, is you using tool on win10? I got a lot trouble with that env.
ubuntu 22.04
Python 3.8.10 (default, Mar 15 2022, 12:22:08)
[GCC 9.4.0] on linux
Magisk 22.4
logforjj said:
-cant go to mtk_gui mode
this line just shock me since I have heard MTK cpu is never can be broken...
maybe we should try all manual setting we can attach, is you using tool on win10? I got a lot trouble with that env.
Click to expand...
Click to collapse
it's not the MTK client's problem
I accidentally destroyed all of my partitions
is there any way to recreate all partitions again?
also, I'm so dumb that I tried to do it with the SP flash tool (didn't work) and now I can't even get to this page
now the phone is completely dead and the screen is not turning on.
the only hope is that the phone can be detected by the sp flash tool and mtk_gui (after formating with the sp flash tool)
I'm not doing anything anymore without any advice.
there is no partitions here
The phone turns into a brick after using the MTK client client (GUI) function, please help!
When I click on all the erase options, the client only recognizes them but cannot save me back to the phone. The volume and power buttons are not responding. Please help me!
forum.xda-developers.com
just like me several days ago, In fact I just brick my device again since flash custom rom for UI2.0(jsut wrong), so now I will trace back that thread and replay again, I think it is okay and both of we can revive it as normal, first thing I am going to is reset win10 again since I suppose some security setting just crash SP flash tool make it did not response anything after I use it( despite bypass is going okay).
logforjj said:
The phone turns into a brick after using the MTK client client (GUI) function, please help!
When I click on all the erase options, the client only recognizes them but cannot save me back to the phone. The volume and power buttons are not responding. Please help me!
forum.xda-developers.com
Click to expand...
Click to collapse
I don't understand anything from this page
please make a user-friendly tutorial for me
and also please give me the files you used
and please shere a working firmwere file with real scatter file